1 /* SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) */
2 /* QLogic qed NIC Driver
3 * Copyright (c) 2015-2017 QLogic Corporation
4 * Copyright (c) 2019-2020 Marvell International Ltd.
10 #include <linux/types.h>
11 #include <linux/interrupt.h>
12 #include <linux/netdevice.h>
13 #include <linux/pci.h>
14 #include <linux/skbuff.h>
15 #include <linux/kernel.h>
16 #include <linux/slab.h>
17 #include <linux/qed/qed_if.h>
19 enum qed_ll2_conn_type
{
24 QED_LL2_TYPE_RESERVED2
,
27 QED_LL2_TYPE_RESERVED3
,
31 enum qed_ll2_rx_conn_type
{
32 QED_LL2_RX_TYPE_LEGACY
,
34 MAX_QED_LL2_RX_CONN_TYPE
37 enum qed_ll2_roce_flavor_type
{
40 MAX_QED_LL2_ROCE_FLAVOR_TYPE
43 enum qed_ll2_tx_dest
{
44 QED_LL2_TX_DEST_NW
, /* Light L2 TX Destination to the Network */
45 QED_LL2_TX_DEST_LB
, /* Light L2 TX Destination to the Loopback */
46 QED_LL2_TX_DEST_DROP
, /* Light L2 Drop the TX packet */
50 enum qed_ll2_error_handle
{
56 struct qed_ll2_stats
{
58 u64 gsi_invalid_pkt_length
;
59 u64 gsi_unsupported_pkt_typ
;
60 u64 gsi_crcchksm_error
;
62 u64 packet_too_big_discard
;
80 struct qed_ll2_comp_rx_data
{
82 dma_addr_t rx_buf_addr
;
103 u8 data_length_error
;
108 void (*qed_ll2_complete_rx_packet_cb
)(void *cxt
,
109 struct qed_ll2_comp_rx_data
*data
);
112 void (*qed_ll2_release_rx_packet_cb
)(void *cxt
,
113 u8 connection_handle
,
115 dma_addr_t rx_buf_addr
,
119 void (*qed_ll2_complete_tx_packet_cb
)(void *cxt
,
120 u8 connection_handle
,
122 dma_addr_t first_frag_addr
,
123 bool b_last_fragment
,
127 void (*qed_ll2_release_tx_packet_cb
)(void *cxt
,
128 u8 connection_handle
,
130 dma_addr_t first_frag_addr
,
131 bool b_last_fragment
, bool b_last_packet
);
134 void (*qed_ll2_slowpath_cb
)(void *cxt
, u8 connection_handle
,
135 u32 opaque_data_0
, u32 opaque_data_1
);
138 qed_ll2_complete_rx_packet_cb rx_comp_cb
;
139 qed_ll2_release_rx_packet_cb rx_release_cb
;
140 qed_ll2_complete_tx_packet_cb tx_comp_cb
;
141 qed_ll2_release_tx_packet_cb tx_release_cb
;
142 qed_ll2_slowpath_cb slowpath_cb
;
146 struct qed_ll2_acquire_data_inputs
{
147 enum qed_ll2_rx_conn_type rx_conn_type
;
148 enum qed_ll2_conn_type conn_type
;
151 u16 rx_num_ooo_buffers
;
153 u8 rx_vlan_removal_en
;
155 u8 tx_max_bds_per_packet
;
157 enum qed_ll2_tx_dest tx_dest
;
158 enum qed_ll2_error_handle ai_err_packet_too_big
;
159 enum qed_ll2_error_handle ai_err_no_buf
;
160 bool secondary_queue
;
164 struct qed_ll2_acquire_data
{
165 struct qed_ll2_acquire_data_inputs input
;
166 const struct qed_ll2_cbs
*cbs
;
168 /* Output container for LL2 connection's handle */
169 u8
*p_connection_handle
;
172 struct qed_ll2_tx_pkt_info
{
174 dma_addr_t first_frag
;
175 enum qed_ll2_tx_dest tx_dest
;
176 enum qed_ll2_roce_flavor_type qed_roce_flavor
;
178 u16 l4_hdr_offset_w
; /* from start of packet */
182 bool enable_ip_cksum
;
183 bool enable_l4_cksum
;
188 #define QED_LL2_UNUSED_HANDLE (0xff)
190 struct qed_ll2_cb_ops
{
191 int (*rx_cb
)(void *, struct sk_buff
*, u32
, u32
);
192 int (*tx_cb
)(void *, struct sk_buff
*, bool);
195 struct qed_ll2_params
{
197 bool drop_ttl0_packets
;
198 bool rx_vlan_stripping
;
201 u8 ll2_mac_address
[ETH_ALEN
];
204 enum qed_ll2_xmit_flags
{
205 /* FIP discovery packet */
206 QED_LL2_XMIT_FLAGS_FIP_DISCOVERY
211 * @brief start - initializes ll2
214 * @param params - protocol driver configuration for the ll2.
216 * @return 0 on success, otherwise error value.
218 int (*start
)(struct qed_dev
*cdev
, struct qed_ll2_params
*params
);
221 * @brief stop - stops the ll2
225 * @return 0 on success, otherwise error value.
227 int (*stop
)(struct qed_dev
*cdev
);
230 * @brief start_xmit - transmits an skb over the ll2 interface
234 * @param xmit_flags - Transmit options defined by the enum qed_ll2_xmit_flags.
236 * @return 0 on success, otherwise error value.
238 int (*start_xmit
)(struct qed_dev
*cdev
, struct sk_buff
*skb
,
239 unsigned long xmit_flags
);
242 * @brief register_cb_ops - protocol driver register the callback for Rx/Tx
243 * packets. Should be called before `start'.
246 * @param cookie - to be passed to the callback functions.
247 * @param ops - the callback functions to register for Rx / Tx.
249 * @return 0 on success, otherwise error value.
251 void (*register_cb_ops
)(struct qed_dev
*cdev
,
252 const struct qed_ll2_cb_ops
*ops
,
256 * @brief get LL2 related statistics
259 * @param stats - pointer to struct that would be filled with stats
261 * @return 0 on success, error otherwise.
263 int (*get_stats
)(struct qed_dev
*cdev
, struct qed_ll2_stats
*stats
);
266 #ifdef CONFIG_QED_LL2
267 int qed_ll2_alloc_if(struct qed_dev
*);
268 void qed_ll2_dealloc_if(struct qed_dev
*);
270 static const struct qed_ll2_ops qed_ll2_ops_pass
= {
274 .register_cb_ops
= NULL
,
278 static inline int qed_ll2_alloc_if(struct qed_dev
*cdev
)
283 static inline void qed_ll2_dealloc_if(struct qed_dev
*cdev
)