1 #ifndef __LINUX_REGMAP_H
2 #define __LINUX_REGMAP_H
5 * Register map access API
7 * Copyright 2011 Wolfson Microelectronics plc
9 * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License version 2 as
13 * published by the Free Software Foundation.
16 #include <linux/device.h>
17 #include <linux/list.h>
24 /* An enum of all the supported cache types */
32 * Default value for a register. We use an array of structs rather
33 * than a simple array as many modern devices have very sparse
36 * @reg: Register address.
37 * @def: Register default value.
47 * Configuration for the register map of a device.
49 * @reg_bits: Number of bits in a register address, mandatory.
50 * @pad_bits: Number of bits of padding between register and value.
51 * @val_bits: Number of bits in a register value, mandatory.
53 * @writeable_reg: Optional callback returning true if the register
55 * @readable_reg: Optional callback returning true if the register
57 * @volatile_reg: Optional callback returning true if the register
58 * value can't be cached.
59 * @precious_reg: Optional callback returning true if the rgister
60 * should not be read outside of a call from the driver
61 * (eg, a clear on read interrupt status register).
63 * @max_register: Optional, specifies the maximum valid register index.
64 * @reg_defaults: Power on reset values for registers (for use with
65 * register cache support).
66 * @num_reg_defaults: Number of elements in reg_defaults.
68 * @read_flag_mask: Mask to be set in the top byte of the register when doing
70 * @write_flag_mask: Mask to be set in the top byte of the register when doing
71 * a write. If both read_flag_mask and write_flag_mask are
72 * empty the regmap_bus default masks are used.
74 * @cache_type: The actual cache type.
75 * @reg_defaults_raw: Power on reset values for registers (for use with
76 * register cache support).
77 * @num_reg_defaults_raw: Number of elements in reg_defaults_raw.
79 struct regmap_config
{
84 bool (*writeable_reg
)(struct device
*dev
, unsigned int reg
);
85 bool (*readable_reg
)(struct device
*dev
, unsigned int reg
);
86 bool (*volatile_reg
)(struct device
*dev
, unsigned int reg
);
87 bool (*precious_reg
)(struct device
*dev
, unsigned int reg
);
89 unsigned int max_register
;
90 const struct reg_default
*reg_defaults
;
91 unsigned int num_reg_defaults
;
92 enum regcache_type cache_type
;
93 const void *reg_defaults_raw
;
94 unsigned int num_reg_defaults_raw
;
100 typedef int (*regmap_hw_write
)(struct device
*dev
, const void *data
,
102 typedef int (*regmap_hw_gather_write
)(struct device
*dev
,
103 const void *reg
, size_t reg_len
,
104 const void *val
, size_t val_len
);
105 typedef int (*regmap_hw_read
)(struct device
*dev
,
106 const void *reg_buf
, size_t reg_size
,
107 void *val_buf
, size_t val_size
);
110 * Description of a hardware bus for the register map infrastructure.
112 * @write: Write operation.
113 * @gather_write: Write operation with split register/value, return -ENOTSUPP
114 * if not implemented on a given device.
115 * @read: Read operation. Data is returned in the buffer used to transmit
117 * @read_flag_mask: Mask to be set in the top byte of the register when doing
121 regmap_hw_write write
;
122 regmap_hw_gather_write gather_write
;
127 struct regmap
*regmap_init(struct device
*dev
,
128 const struct regmap_bus
*bus
,
129 const struct regmap_config
*config
);
130 struct regmap
*regmap_init_i2c(struct i2c_client
*i2c
,
131 const struct regmap_config
*config
);
132 struct regmap
*regmap_init_spi(struct spi_device
*dev
,
133 const struct regmap_config
*config
);
135 void regmap_exit(struct regmap
*map
);
136 int regmap_reinit_cache(struct regmap
*map
,
137 const struct regmap_config
*config
);
138 int regmap_write(struct regmap
*map
, unsigned int reg
, unsigned int val
);
139 int regmap_raw_write(struct regmap
*map
, unsigned int reg
,
140 const void *val
, size_t val_len
);
141 int regmap_read(struct regmap
*map
, unsigned int reg
, unsigned int *val
);
142 int regmap_raw_read(struct regmap
*map
, unsigned int reg
,
143 void *val
, size_t val_len
);
144 int regmap_bulk_read(struct regmap
*map
, unsigned int reg
, void *val
,
146 int regmap_update_bits(struct regmap
*map
, unsigned int reg
,
147 unsigned int mask
, unsigned int val
);
148 int regmap_update_bits_check(struct regmap
*map
, unsigned int reg
,
149 unsigned int mask
, unsigned int val
,
152 int regcache_sync(struct regmap
*map
);
153 void regcache_cache_only(struct regmap
*map
, bool enable
);
154 void regcache_cache_bypass(struct regmap
*map
, bool enable
);
155 void regcache_mark_dirty(struct regmap
*map
);
158 * Description of an IRQ for the generic regmap irq_chip.
160 * @reg_offset: Offset of the status/mask register within the bank
161 * @mask: Mask used to flag/control the register.
164 unsigned int reg_offset
;
169 * Description of a generic regmap irq_chip. This is not intended to
170 * handle every possible interrupt controller, but it should handle a
171 * substantial proportion of those that are found in the wild.
173 * @name: Descriptive name for IRQ controller.
175 * @status_base: Base status register address.
176 * @mask_base: Base mask register address.
177 * @ack_base: Base ack address. If zero then the chip is clear on read.
179 * @num_regs: Number of registers in each control bank.
180 * @irqs: Descriptors for individual IRQs. Interrupt numbers are
181 * assigned based on the index in the array of the interrupt.
182 * @num_irqs: Number of descriptors.
184 struct regmap_irq_chip
{
187 unsigned int status_base
;
188 unsigned int mask_base
;
189 unsigned int ack_base
;
193 const struct regmap_irq
*irqs
;
197 struct regmap_irq_chip_data
;
199 int regmap_add_irq_chip(struct regmap
*map
, int irq
, int irq_flags
,
200 int irq_base
, struct regmap_irq_chip
*chip
,
201 struct regmap_irq_chip_data
**data
);
202 void regmap_del_irq_chip(int irq
, struct regmap_irq_chip_data
*data
);
203 int regmap_irq_chip_get_base(struct regmap_irq_chip_data
*data
);
208 * These stubs should only ever be called by generic code which has
209 * regmap based facilities, if they ever get called at runtime
210 * something is going wrong and something probably needs to select
214 static inline int regmap_write(struct regmap
*map
, unsigned int reg
,
217 WARN_ONCE(1, "regmap API is disabled");
221 static inline int regmap_raw_write(struct regmap
*map
, unsigned int reg
,
222 const void *val
, size_t val_len
)
224 WARN_ONCE(1, "regmap API is disabled");
228 static inline int regmap_bulk_write(struct regmap
*map
, unsigned int reg
,
229 const void *val
, size_t val_count
)
231 WARN_ONCE(1, "regmap API is disabled");
235 static inline int regmap_read(struct regmap
*map
, unsigned int reg
,
238 WARN_ONCE(1, "regmap API is disabled");
242 static inline int regmap_raw_read(struct regmap
*map
, unsigned int reg
,
243 void *val
, size_t val_len
)
245 WARN_ONCE(1, "regmap API is disabled");
249 static inline int regmap_bulk_read(struct regmap
*map
, unsigned int reg
,
250 void *val
, size_t val_count
)
252 WARN_ONCE(1, "regmap API is disabled");
256 static inline int regmap_update_bits(struct regmap
*map
, unsigned int reg
,
257 unsigned int mask
, unsigned int val
)
259 WARN_ONCE(1, "regmap API is disabled");
263 static inline int regmap_update_bits_check(struct regmap
*map
,
265 unsigned int mask
, unsigned int val
,
268 WARN_ONCE(1, "regmap API is disabled");
272 static inline int regmap_get_val_bytes(struct regmap
*map
)
274 WARN_ONCE(1, "regmap API is disabled");
278 static inline int regcache_sync(struct regmap
*map
)
280 WARN_ONCE(1, "regmap API is disabled");
284 static inline int regcache_sync_region(struct regmap
*map
, unsigned int min
,
287 WARN_ONCE(1, "regmap API is disabled");
291 static inline void regcache_cache_only(struct regmap
*map
, bool enable
)
293 WARN_ONCE(1, "regmap API is disabled");
296 static inline void regcache_cache_bypass(struct regmap
*map
, bool enable
)
298 WARN_ONCE(1, "regmap API is disabled");
301 static inline void regcache_mark_dirty(struct regmap
*map
)
303 WARN_ONCE(1, "regmap API is disabled");
306 static inline int regmap_register_patch(struct regmap
*map
,
307 const struct reg_default
*regs
,
310 WARN_ONCE(1, "regmap API is disabled");