]> git.proxmox.com Git - mirror_ubuntu-bionic-kernel.git/blob - include/linux/sdla.h
8021q: fix a potential memory leak
[mirror_ubuntu-bionic-kernel.git] / include / linux / sdla.h
1 /*
2 * INET An implementation of the TCP/IP protocol suite for the LINUX
3 * operating system. INET is implemented using the BSD Socket
4 * interface as the means of communication with the user level.
5 *
6 * Global definitions for the Frame relay interface.
7 *
8 * Version: @(#)if_ifrad.h 0.20 13 Apr 96
9 *
10 * Author: Mike McLagan <mike.mclagan@linux.org>
11 *
12 * Changes:
13 * 0.15 Mike McLagan Structure packing
14 *
15 * 0.20 Mike McLagan New flags for S508 buffer handling
16 *
17 * This program is free software; you can redistribute it and/or
18 * modify it under the terms of the GNU General Public License
19 * as published by the Free Software Foundation; either version
20 * 2 of the License, or (at your option) any later version.
21 */
22 #ifndef SDLA_H
23 #define SDLA_H
24
25 #include <uapi/linux/sdla.h>
26
27
28 /* important Z80 window addresses */
29 #define SDLA_CONTROL_WND 0xE000
30
31 #define SDLA_502_CMD_BUF 0xEF60
32 #define SDLA_502_RCV_BUF 0xA900
33 #define SDLA_502_TXN_AVAIL 0xFFF1
34 #define SDLA_502_RCV_AVAIL 0xFFF2
35 #define SDLA_502_EVENT_FLAGS 0xFFF3
36 #define SDLA_502_MDM_STATUS 0xFFF4
37 #define SDLA_502_IRQ_INTERFACE 0xFFFD
38 #define SDLA_502_IRQ_PERMISSION 0xFFFE
39 #define SDLA_502_DATA_OFS 0x0010
40
41 #define SDLA_508_CMD_BUF 0xE000
42 #define SDLA_508_TXBUF_INFO 0xF100
43 #define SDLA_508_RXBUF_INFO 0xF120
44 #define SDLA_508_EVENT_FLAGS 0xF003
45 #define SDLA_508_MDM_STATUS 0xF004
46 #define SDLA_508_IRQ_INTERFACE 0xF010
47 #define SDLA_508_IRQ_PERMISSION 0xF011
48 #define SDLA_508_TSE_OFFSET 0xF012
49
50 /* Event flags */
51 #define SDLA_EVENT_STATUS 0x01
52 #define SDLA_EVENT_DLCI_STATUS 0x02
53 #define SDLA_EVENT_BAD_DLCI 0x04
54 #define SDLA_EVENT_LINK_DOWN 0x40
55
56 /* IRQ Trigger flags */
57 #define SDLA_INTR_RX 0x01
58 #define SDLA_INTR_TX 0x02
59 #define SDLA_INTR_MODEM 0x04
60 #define SDLA_INTR_COMPLETE 0x08
61 #define SDLA_INTR_STATUS 0x10
62 #define SDLA_INTR_TIMER 0x20
63
64 /* DLCI status bits */
65 #define SDLA_DLCI_DELETED 0x01
66 #define SDLA_DLCI_ACTIVE 0x02
67 #define SDLA_DLCI_WAITING 0x04
68 #define SDLA_DLCI_NEW 0x08
69 #define SDLA_DLCI_INCLUDED 0x40
70
71 /* valid command codes */
72 #define SDLA_INFORMATION_WRITE 0x01
73 #define SDLA_INFORMATION_READ 0x02
74 #define SDLA_ISSUE_IN_CHANNEL_SIGNAL 0x03
75 #define SDLA_SET_DLCI_CONFIGURATION 0x10
76 #define SDLA_READ_DLCI_CONFIGURATION 0x11
77 #define SDLA_DISABLE_COMMUNICATIONS 0x12
78 #define SDLA_ENABLE_COMMUNICATIONS 0x13
79 #define SDLA_READ_DLC_STATUS 0x14
80 #define SDLA_READ_DLC_STATISTICS 0x15
81 #define SDLA_FLUSH_DLC_STATISTICS 0x16
82 #define SDLA_LIST_ACTIVE_DLCI 0x17
83 #define SDLA_FLUSH_INFORMATION_BUFFERS 0x18
84 #define SDLA_ADD_DLCI 0x20
85 #define SDLA_DELETE_DLCI 0x21
86 #define SDLA_ACTIVATE_DLCI 0x22
87 #define SDLA_DEACTIVATE_DLCI 0x23
88 #define SDLA_READ_MODEM_STATUS 0x30
89 #define SDLA_SET_MODEM_STATUS 0x31
90 #define SDLA_READ_COMMS_ERR_STATS 0x32
91 #define SDLA_FLUSH_COMMS_ERR_STATS 0x33
92 #define SDLA_READ_CODE_VERSION 0x40
93 #define SDLA_SET_IRQ_TRIGGER 0x50
94 #define SDLA_GET_IRQ_TRIGGER 0x51
95
96 /* In channel signal types */
97 #define SDLA_ICS_LINK_VERIFY 0x02
98 #define SDLA_ICS_STATUS_ENQ 0x03
99
100 /* modem status flags */
101 #define SDLA_MODEM_DTR_HIGH 0x01
102 #define SDLA_MODEM_RTS_HIGH 0x02
103 #define SDLA_MODEM_DCD_HIGH 0x08
104 #define SDLA_MODEM_CTS_HIGH 0x20
105
106 /* used for RET_MODEM interpretation */
107 #define SDLA_MODEM_DCD_LOW 0x01
108 #define SDLA_MODEM_CTS_LOW 0x02
109
110 /* return codes */
111 #define SDLA_RET_OK 0x00
112 #define SDLA_RET_COMMUNICATIONS 0x01
113 #define SDLA_RET_CHANNEL_INACTIVE 0x02
114 #define SDLA_RET_DLCI_INACTIVE 0x03
115 #define SDLA_RET_DLCI_CONFIG 0x04
116 #define SDLA_RET_BUF_TOO_BIG 0x05
117 #define SDLA_RET_NO_DATA 0x05
118 #define SDLA_RET_BUF_OVERSIZE 0x06
119 #define SDLA_RET_CIR_OVERFLOW 0x07
120 #define SDLA_RET_NO_BUFS 0x08
121 #define SDLA_RET_TIMEOUT 0x0A
122 #define SDLA_RET_MODEM 0x10
123 #define SDLA_RET_CHANNEL_OFF 0x11
124 #define SDLA_RET_CHANNEL_ON 0x12
125 #define SDLA_RET_DLCI_STATUS 0x13
126 #define SDLA_RET_DLCI_UNKNOWN 0x14
127 #define SDLA_RET_COMMAND_INVALID 0x1F
128
129 /* Configuration flags */
130 #define SDLA_DIRECT_RECV 0x0080
131 #define SDLA_TX_NO_EXCEPT 0x0020
132 #define SDLA_NO_ICF_MSGS 0x1000
133 #define SDLA_TX50_RX50 0x0000
134 #define SDLA_TX70_RX30 0x2000
135 #define SDLA_TX30_RX70 0x4000
136
137 /* IRQ selection flags */
138 #define SDLA_IRQ_RECEIVE 0x01
139 #define SDLA_IRQ_TRANSMIT 0x02
140 #define SDLA_IRQ_MODEM_STAT 0x04
141 #define SDLA_IRQ_COMMAND 0x08
142 #define SDLA_IRQ_CHANNEL 0x10
143 #define SDLA_IRQ_TIMER 0x20
144
145 /* definitions for PC memory mapping */
146 #define SDLA_8K_WINDOW 0x01
147 #define SDLA_S502_SEG_A 0x10
148 #define SDLA_S502_SEG_C 0x20
149 #define SDLA_S502_SEG_D 0x00
150 #define SDLA_S502_SEG_E 0x30
151 #define SDLA_S507_SEG_A 0x00
152 #define SDLA_S507_SEG_B 0x40
153 #define SDLA_S507_SEG_C 0x80
154 #define SDLA_S507_SEG_E 0xC0
155 #define SDLA_S508_SEG_A 0x00
156 #define SDLA_S508_SEG_C 0x10
157 #define SDLA_S508_SEG_D 0x08
158 #define SDLA_S508_SEG_E 0x18
159
160 /* SDLA adapter port constants */
161 #define SDLA_IO_EXTENTS 0x04
162
163 #define SDLA_REG_CONTROL 0x00
164 #define SDLA_REG_PC_WINDOW 0x01 /* offset for PC window select latch */
165 #define SDLA_REG_Z80_WINDOW 0x02 /* offset for Z80 window select latch */
166 #define SDLA_REG_Z80_CONTROL 0x03 /* offset for Z80 control latch */
167
168 #define SDLA_S502_STS 0x00 /* status reg for 502, 502E, 507 */
169 #define SDLA_S508_GNRL 0x00 /* general purp. reg for 508 */
170 #define SDLA_S508_STS 0x01 /* status reg for 508 */
171 #define SDLA_S508_IDR 0x02 /* ID reg for 508 */
172
173 /* control register flags */
174 #define SDLA_S502A_START 0x00 /* start the CPU */
175 #define SDLA_S502A_INTREQ 0x02
176 #define SDLA_S502A_INTEN 0x04
177 #define SDLA_S502A_HALT 0x08 /* halt the CPU */
178 #define SDLA_S502A_NMI 0x10 /* issue an NMI to the CPU */
179
180 #define SDLA_S502E_CPUEN 0x01
181 #define SDLA_S502E_ENABLE 0x02
182 #define SDLA_S502E_INTACK 0x04
183
184 #define SDLA_S507_ENABLE 0x01
185 #define SDLA_S507_IRQ3 0x00
186 #define SDLA_S507_IRQ4 0x20
187 #define SDLA_S507_IRQ5 0x40
188 #define SDLA_S507_IRQ7 0x60
189 #define SDLA_S507_IRQ10 0x80
190 #define SDLA_S507_IRQ11 0xA0
191 #define SDLA_S507_IRQ12 0xC0
192 #define SDLA_S507_IRQ15 0xE0
193
194 #define SDLA_HALT 0x00
195 #define SDLA_CPUEN 0x02
196 #define SDLA_MEMEN 0x04
197 #define SDLA_S507_EPROMWR 0x08
198 #define SDLA_S507_EPROMCLK 0x10
199 #define SDLA_S508_INTRQ 0x08
200 #define SDLA_S508_INTEN 0x10
201
202 struct sdla_cmd {
203 char opp_flag;
204 char cmd;
205 short length;
206 char retval;
207 short dlci;
208 char flags;
209 short rxlost_int;
210 long rxlost_app;
211 char reserve[2];
212 char data[SDLA_MAX_DATA]; /* transfer data buffer */
213 } __attribute__((packed));
214
215 struct intr_info {
216 char flags;
217 short txlen;
218 char irq;
219 char flags2;
220 short timeout;
221 } __attribute__((packed));
222
223 /* found in the 508's control window at RXBUF_INFO */
224 struct buf_info {
225 unsigned short rse_num;
226 unsigned long rse_base;
227 unsigned long rse_next;
228 unsigned long buf_base;
229 unsigned short reserved;
230 unsigned long buf_top;
231 } __attribute__((packed));
232
233 /* structure pointed to by rse_base in RXBUF_INFO struct */
234 struct buf_entry {
235 char opp_flag;
236 short length;
237 short dlci;
238 char flags;
239 short timestamp;
240 short reserved[2];
241 long buf_addr;
242 } __attribute__((packed));
243
244 #endif