]>
git.proxmox.com Git - mirror_ubuntu-zesty-kernel.git/blob - include/linux/sdlapci.h
1 /*****************************************************************************
2 * sdlapci.h WANPIPE(tm) Multiprotocol WAN Link Driver.
3 * Definitions for the SDLA PCI adapter.
5 * Author: Gideon Hack <ghack@sangoma.com>
7 * Copyright: (c) 1999-2000 Sangoma Technologies Inc.
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License
11 * as published by the Free Software Foundation; either version
12 * 2 of the License, or (at your option) any later version.
13 * ============================================================================
14 * Jun 02, 1999 Gideon Hack Initial version.
15 *****************************************************************************/
19 /****** Defines *************************************************************/
21 /* Definitions for identifying and finding S514 PCI adapters */
22 #define V3_VENDOR_ID 0x11B0 /* V3 vendor ID number */
23 #define V3_DEVICE_ID 0x0002 /* V3 device ID number */
24 #define SANGOMA_SUBSYS_VENDOR 0x4753 /* ID for Sangoma */
25 #define PCI_DEV_SLOT_MASK 0x1F /* mask for slot numbering */
26 #define PCI_IRQ_NOT_ALLOCATED 0xFF /* interrupt line for no IRQ */
28 /* Local PCI register offsets */
29 #define PCI_VENDOR_ID_WORD 0x00 /* vendor ID */
30 #define PCI_IO_BASE_DWORD 0x10 /* IO base */
31 #define PCI_MEM_BASE0_DWORD 0x14 /* memory base - apperture 0 */
32 #define PCI_MEM_BASE1_DWORD 0x18 /* memory base - apperture 1 */
33 #define PCI_SUBSYS_VENDOR_WORD 0x2C /* subsystem vendor ID */
34 #define PCI_INT_LINE_BYTE 0x3C /* interrupt line */
35 #define PCI_INT_PIN_BYTE 0x3D /* interrupt pin */
36 #define PCI_MAP0_DWORD 0x40 /* PCI to local bus address 0 */
37 #define PCI_MAP1_DWORD 0x44 /* PCI to local bus address 1 */
38 #define PCI_INT_STATUS 0x48 /* interrupt status */
39 #define PCI_INT_CONFIG 0x4C /* interrupt configuration */
41 /* Local PCI register usage */
42 #define PCI_MEMORY_ENABLE 0x00000003 /* enable PCI memory */
43 #define PCI_CPU_A_MEM_DISABLE 0x00000002 /* disable CPU A memory */
44 #define PCI_CPU_B_MEM_DISABLE 0x00100002 /* disable CPU B memory */
45 #define PCI_ENABLE_IRQ_CPU_A 0x005A0004 /* enable IRQ for CPU A */
46 #define PCI_ENABLE_IRQ_CPU_B 0x005A0008 /* enable IRQ for CPU B */
47 #define PCI_DISABLE_IRQ_CPU_A 0x00000004 /* disable IRQ for CPU A */
48 #define PCI_DISABLE_IRQ_CPU_B 0x00000008 /* disable IRQ for CPU B */
50 /* Setting for the Interrupt Status register */
51 #define IRQ_CPU_A 0x04 /* IRQ for CPU A */
52 #define IRQ_CPU_B 0x08 /* IRQ for CPU B */
54 /* The maximum size of the S514 memory */
55 #define MAX_SIZEOF_S514_MEMORY (256 * 1024)
57 /* S514 control register offsets within the memory address space */
58 #define S514_CTRL_REG_BYTE 0x80000
60 /* S514 adapter control bytes */
61 #define S514_CPU_HALT 0x00
62 #define S514_CPU_START 0x01
64 /* The maximum number of S514 adapters supported */
65 #define MAX_S514_CARDS 20
67 #define PCI_CARD_TYPE 0x2E
68 #define S514_DUAL_CPU 0x12
69 #define S514_SINGLE_CPU 0x11
71 #endif /* _SDLAPCI_H */