1 /* SPDX-License-Identifier: GPL-2.0-or-later */
3 * linux/include/linux/serial_8250.h
5 * Copyright (C) 2004 Russell King
7 #ifndef _LINUX_SERIAL_8250_H
8 #define _LINUX_SERIAL_8250_H
10 #include <linux/serial_core.h>
11 #include <linux/serial_reg.h>
12 #include <linux/platform_device.h>
15 * This is the platform device platform_data structure
17 struct plat_serial8250_port
{
18 unsigned long iobase
; /* io base address */
19 void __iomem
*membase
; /* ioremap cookie or NULL */
20 resource_size_t mapbase
; /* resource base */
21 unsigned int irq
; /* interrupt number */
22 unsigned long irqflags
; /* request_irq flags */
23 unsigned int uartclk
; /* UART clock rate */
25 unsigned char regshift
; /* register shift */
26 unsigned char iotype
; /* UPIO_* */
28 unsigned char has_sysrq
; /* supports magic SysRq */
29 upf_t flags
; /* UPF_* flags */
30 unsigned int type
; /* If UPF_FIXED_TYPE */
31 unsigned int (*serial_in
)(struct uart_port
*, int);
32 void (*serial_out
)(struct uart_port
*, int, int);
33 void (*set_termios
)(struct uart_port
*,
35 struct ktermios
*old
);
36 void (*set_ldisc
)(struct uart_port
*,
38 unsigned int (*get_mctrl
)(struct uart_port
*);
39 int (*handle_irq
)(struct uart_port
*);
40 void (*pm
)(struct uart_port
*, unsigned int state
,
42 void (*handle_break
)(struct uart_port
*);
46 * Allocate 8250 platform device IDs. Nothing is implied by
47 * the numbering here, except for the legacy entry being -1.
50 PLAT8250_DEV_LEGACY
= -1,
51 PLAT8250_DEV_PLATFORM
,
52 PLAT8250_DEV_PLATFORM1
,
53 PLAT8250_DEV_PLATFORM2
,
54 PLAT8250_DEV_FOURPORT
,
57 PLAT8250_DEV_EXAR_ST16C554
,
64 struct uart_8250_port
;
67 * 8250 core driver operations
69 * @setup_irq() Setup irq handling. The universal 8250 driver links this
70 * port to the irq chain. Other drivers may @request_irq().
71 * @release_irq() Undo irq handling. The universal 8250 driver unlinks
72 * the port from the irq chain.
74 struct uart_8250_ops
{
75 int (*setup_irq
)(struct uart_8250_port
*);
76 void (*release_irq
)(struct uart_8250_port
*);
79 struct uart_8250_em485
{
80 struct hrtimer start_tx_timer
; /* "rs485 start tx" timer */
81 struct hrtimer stop_tx_timer
; /* "rs485 stop tx" timer */
82 struct hrtimer
*active_timer
; /* pointer to active timer */
83 struct uart_8250_port
*port
; /* for hrtimer callbacks */
84 unsigned int tx_stopped
:1; /* tx is currently stopped */
88 * This should be used by drivers which want to register
89 * their own 8250 ports without registering their own
90 * platform device. Using these will make your driver
91 * dependent on the 8250 driver.
94 struct uart_8250_port
{
95 struct uart_port port
;
96 struct timer_list timer
; /* "no irq" timer */
97 struct list_head list
; /* ports on this IRQ */
98 u32 capabilities
; /* port capabilities */
99 unsigned short bugs
; /* port bugs */
100 bool fifo_bug
; /* min RX trigger if enabled */
101 unsigned int tx_loadsz
; /* transmit fifo load size */
107 unsigned char mcr_mask
; /* mask of user bits */
108 unsigned char mcr_force
; /* mask of forced bits */
109 unsigned char cur_iotype
; /* Running I/O type */
110 unsigned int rpm_tx_active
;
111 unsigned char canary
; /* non-zero during system sleep
112 * if no_console_suspend
115 struct mctrl_gpios
*gpios
;
116 #define UART_PROBE_RSA (1 << 0)
119 * Some bits in registers are cleared on a read, so they must
120 * be saved whenever the register is read but the bits will not
121 * be immediately processed.
123 #define LSR_SAVE_FLAGS UART_LSR_BRK_ERROR_BITS
124 unsigned char lsr_saved_flags
;
125 #define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA
126 unsigned char msr_saved_flags
;
128 struct uart_8250_dma
*dma
;
129 const struct uart_8250_ops
*ops
;
131 /* 8250 specific callbacks */
132 int (*dl_read
)(struct uart_8250_port
*);
133 void (*dl_write
)(struct uart_8250_port
*, int);
135 struct uart_8250_em485
*em485
;
136 void (*rs485_start_tx
)(struct uart_8250_port
*);
137 void (*rs485_stop_tx
)(struct uart_8250_port
*);
139 /* Serial port overrun backoff */
140 struct delayed_work overrun_backoff
;
141 u32 overrun_backoff_time_ms
;
144 static inline struct uart_8250_port
*up_to_u8250p(struct uart_port
*up
)
146 return container_of(up
, struct uart_8250_port
, port
);
149 int serial8250_register_8250_port(const struct uart_8250_port
*);
150 void serial8250_unregister_port(int line
);
151 void serial8250_suspend_port(int line
);
152 void serial8250_resume_port(int line
);
154 extern int early_serial_setup(struct uart_port
*port
);
156 extern int early_serial8250_setup(struct earlycon_device
*device
,
157 const char *options
);
158 extern void serial8250_update_uartclk(struct uart_port
*port
,
159 unsigned int uartclk
);
160 extern void serial8250_do_set_termios(struct uart_port
*port
,
161 struct ktermios
*termios
, struct ktermios
*old
);
162 extern void serial8250_do_set_ldisc(struct uart_port
*port
,
163 struct ktermios
*termios
);
164 extern unsigned int serial8250_do_get_mctrl(struct uart_port
*port
);
165 extern int serial8250_do_startup(struct uart_port
*port
);
166 extern void serial8250_do_shutdown(struct uart_port
*port
);
167 extern void serial8250_do_pm(struct uart_port
*port
, unsigned int state
,
168 unsigned int oldstate
);
169 extern void serial8250_do_set_mctrl(struct uart_port
*port
, unsigned int mctrl
);
170 extern void serial8250_do_set_divisor(struct uart_port
*port
, unsigned int baud
,
172 unsigned int quot_frac
);
173 extern int fsl8250_handle_irq(struct uart_port
*port
);
174 int serial8250_handle_irq(struct uart_port
*port
, unsigned int iir
);
175 unsigned char serial8250_rx_chars(struct uart_8250_port
*up
, unsigned char lsr
);
176 void serial8250_read_char(struct uart_8250_port
*up
, unsigned char lsr
);
177 void serial8250_tx_chars(struct uart_8250_port
*up
);
178 unsigned int serial8250_modem_status(struct uart_8250_port
*up
);
179 void serial8250_init_port(struct uart_8250_port
*up
);
180 void serial8250_set_defaults(struct uart_8250_port
*up
);
181 void serial8250_console_write(struct uart_8250_port
*up
, const char *s
,
183 int serial8250_console_setup(struct uart_port
*port
, char *options
, bool probe
);
184 int serial8250_console_exit(struct uart_port
*port
);
186 extern void serial8250_set_isa_configurator(void (*v
)
187 (int port
, struct uart_port
*up
,
190 #ifdef CONFIG_SERIAL_8250_RT288X
191 unsigned int au_serial_in(struct uart_port
*p
, int offset
);
192 void au_serial_out(struct uart_port
*p
, int offset
, int value
);