2 * Definitions for the 'struct sk_buff' memory handlers.
5 * Alan Cox, <gw4pts@gw4pts.ampr.org>
6 * Florian La Roche, <rzsfl@rz.uni-sb.de>
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License
10 * as published by the Free Software Foundation; either version
11 * 2 of the License, or (at your option) any later version.
14 #ifndef _LINUX_SKBUFF_H
15 #define _LINUX_SKBUFF_H
17 #include <linux/kernel.h>
18 #include <linux/compiler.h>
19 #include <linux/time.h>
20 #include <linux/cache.h>
22 #include <asm/atomic.h>
23 #include <asm/types.h>
24 #include <linux/spinlock.h>
25 #include <linux/net.h>
26 #include <linux/textsearch.h>
27 #include <net/checksum.h>
28 #include <linux/rcupdate.h>
29 #include <linux/dmaengine.h>
30 #include <linux/hrtimer.h>
32 #define HAVE_ALLOC_SKB /* For the drivers to know */
33 #define HAVE_ALIGNABLE_SKB /* Ditto 8) */
35 /* Don't change this without changing skb_csum_unnecessary! */
36 #define CHECKSUM_NONE 0
37 #define CHECKSUM_UNNECESSARY 1
38 #define CHECKSUM_COMPLETE 2
39 #define CHECKSUM_PARTIAL 3
41 #define SKB_DATA_ALIGN(X) (((X) + (SMP_CACHE_BYTES - 1)) & \
42 ~(SMP_CACHE_BYTES - 1))
43 #define SKB_WITH_OVERHEAD(X) \
44 (((X) - sizeof(struct skb_shared_info)) & \
45 ~(SMP_CACHE_BYTES - 1))
46 #define SKB_MAX_ORDER(X, ORDER) \
47 SKB_WITH_OVERHEAD((PAGE_SIZE << (ORDER)) - (X))
48 #define SKB_MAX_HEAD(X) (SKB_MAX_ORDER((X), 0))
49 #define SKB_MAX_ALLOC (SKB_MAX_ORDER(0, 2))
51 /* A. Checksumming of received packets by device.
53 * NONE: device failed to checksum this packet.
54 * skb->csum is undefined.
56 * UNNECESSARY: device parsed packet and wouldbe verified checksum.
57 * skb->csum is undefined.
58 * It is bad option, but, unfortunately, many of vendors do this.
59 * Apparently with secret goal to sell you new device, when you
60 * will add new protocol to your host. F.e. IPv6. 8)
62 * COMPLETE: the most generic way. Device supplied checksum of _all_
63 * the packet as seen by netif_rx in skb->csum.
64 * NOTE: Even if device supports only some protocols, but
65 * is able to produce some skb->csum, it MUST use COMPLETE,
68 * B. Checksumming on output.
70 * NONE: skb is checksummed by protocol or csum is not required.
72 * PARTIAL: device is required to csum packet as seen by hard_start_xmit
73 * from skb->transport_header to the end and to record the checksum
74 * at skb->transport_header + skb->csum.
76 * Device must show its capabilities in dev->features, set
77 * at device setup time.
78 * NETIF_F_HW_CSUM - it is clever device, it is able to checksum
80 * NETIF_F_NO_CSUM - loopback or reliable single hop media.
81 * NETIF_F_IP_CSUM - device is dumb. It is able to csum only
82 * TCP/UDP over IPv4. Sigh. Vendors like this
83 * way by an unknown reason. Though, see comment above
84 * about CHECKSUM_UNNECESSARY. 8)
86 * Any questions? No questions, good. --ANK
92 #if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
98 #ifdef CONFIG_BRIDGE_NETFILTER
99 struct nf_bridge_info
{
101 struct net_device
*physindev
;
102 struct net_device
*physoutdev
;
103 #if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
104 struct net_device
*netoutdev
;
107 unsigned long data
[32 / sizeof(unsigned long)];
111 struct sk_buff_head
{
112 /* These two members must be first. */
113 struct sk_buff
*next
;
114 struct sk_buff
*prev
;
122 /* To allow 64K frame to be packed as single skb without frag_list */
123 #define MAX_SKB_FRAGS (65536/PAGE_SIZE + 2)
125 typedef struct skb_frag_struct skb_frag_t
;
127 struct skb_frag_struct
{
133 /* This data is invariant across clones and lives at
134 * the end of the header data, ie. at skb->end.
136 struct skb_shared_info
{
138 unsigned short nr_frags
;
139 unsigned short gso_size
;
140 /* Warning: this field is not always filled in (UFO)! */
141 unsigned short gso_segs
;
142 unsigned short gso_type
;
144 struct sk_buff
*frag_list
;
145 skb_frag_t frags
[MAX_SKB_FRAGS
];
148 /* We divide dataref into two halves. The higher 16 bits hold references
149 * to the payload part of skb->data. The lower 16 bits hold references to
150 * the entire skb->data. It is up to the users of the skb to agree on
151 * where the payload starts.
153 * All users must obey the rule that the skb->data reference count must be
154 * greater than or equal to the payload reference count.
156 * Holding a reference to the payload part means that the user does not
157 * care about modifications to the header part of skb->data.
159 #define SKB_DATAREF_SHIFT 16
160 #define SKB_DATAREF_MASK ((1 << SKB_DATAREF_SHIFT) - 1)
164 SKB_FCLONE_UNAVAILABLE
,
170 SKB_GSO_TCPV4
= 1 << 0,
171 SKB_GSO_UDP
= 1 << 1,
173 /* This indicates the skb is from an untrusted source. */
174 SKB_GSO_DODGY
= 1 << 2,
176 /* This indicates the tcp segment has CWR set. */
177 SKB_GSO_TCP_ECN
= 1 << 3,
179 SKB_GSO_TCPV6
= 1 << 4,
182 #if BITS_PER_LONG > 32
183 #define NET_SKBUFF_DATA_USES_OFFSET 1
186 #ifdef NET_SKBUFF_DATA_USES_OFFSET
187 typedef unsigned int sk_buff_data_t
;
189 typedef unsigned char *sk_buff_data_t
;
193 * struct sk_buff - socket buffer
194 * @next: Next buffer in list
195 * @prev: Previous buffer in list
196 * @sk: Socket we are owned by
197 * @tstamp: Time we arrived
198 * @dev: Device we arrived on/are leaving by
199 * @iif: ifindex of device we arrived on
200 * @h: Transport layer header
201 * @network_header: Network layer header
202 * @mac_header: Link layer header
203 * @dst: destination entry
204 * @sp: the security path, used for xfrm
205 * @cb: Control buffer. Free for use by every layer. Put private vars here
206 * @len: Length of actual data
207 * @data_len: Data length
208 * @mac_len: Length of link layer header
209 * @csum: Checksum (must include start/offset pair)
210 * @csum_start: Offset from skb->head where checksumming should start
211 * @csum_offset: Offset from csum_start where checksum should be stored
212 * @local_df: allow local fragmentation
213 * @cloned: Head may be cloned (check refcnt to be sure)
214 * @nohdr: Payload reference only, must not modify header
215 * @pkt_type: Packet class
216 * @fclone: skbuff clone status
217 * @ip_summed: Driver fed us an IP checksum
218 * @priority: Packet queueing priority
219 * @users: User count - see {datagram,tcp}.c
220 * @protocol: Packet protocol from driver
221 * @truesize: Buffer size
222 * @head: Head of buffer
223 * @data: Data head pointer
224 * @tail: Tail pointer
226 * @destructor: Destruct function
227 * @mark: Generic packet mark
228 * @nfct: Associated connection, if any
229 * @ipvs_property: skbuff is owned by ipvs
230 * @nfctinfo: Relationship of this skb to the connection
231 * @nfct_reasm: netfilter conntrack re-assembly pointer
232 * @nf_bridge: Saved data about a bridged frame - see br_netfilter.c
233 * @tc_index: Traffic control index
234 * @tc_verd: traffic control verdict
235 * @dma_cookie: a cookie to one of several possible DMA operations
236 * done by skb DMA functions
237 * @secmark: security marking
241 /* These two members must be first. */
242 struct sk_buff
*next
;
243 struct sk_buff
*prev
;
247 struct net_device
*dev
;
249 /* 4 byte hole on 64 bit*/
251 struct dst_entry
*dst
;
255 * This is the control buffer. It is free to use for every
256 * layer. Please put your private variables there. If you
257 * want to keep them across layers you have to do a skb_clone()
258 * first. This is owned by whoever has the skb queued ATM.
283 void (*destructor
)(struct sk_buff
*skb
);
284 #if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
285 struct nf_conntrack
*nfct
;
286 struct sk_buff
*nfct_reasm
;
288 #ifdef CONFIG_BRIDGE_NETFILTER
289 struct nf_bridge_info
*nf_bridge
;
291 #ifdef CONFIG_NET_SCHED
292 __u16 tc_index
; /* traffic control index */
293 #ifdef CONFIG_NET_CLS_ACT
294 __u16 tc_verd
; /* traffic control verdict */
297 #ifdef CONFIG_NET_DMA
298 dma_cookie_t dma_cookie
;
300 #ifdef CONFIG_NETWORK_SECMARK
306 sk_buff_data_t transport_header
;
307 sk_buff_data_t network_header
;
308 sk_buff_data_t mac_header
;
309 /* These elements must be at the end, see alloc_skb() for details. */
314 unsigned int truesize
;
320 * Handling routines are only of interest to the kernel
322 #include <linux/slab.h>
324 #include <asm/system.h>
326 extern void kfree_skb(struct sk_buff
*skb
);
327 extern void __kfree_skb(struct sk_buff
*skb
);
328 extern struct sk_buff
*__alloc_skb(unsigned int size
,
329 gfp_t priority
, int fclone
, int node
);
330 static inline struct sk_buff
*alloc_skb(unsigned int size
,
333 return __alloc_skb(size
, priority
, 0, -1);
336 static inline struct sk_buff
*alloc_skb_fclone(unsigned int size
,
339 return __alloc_skb(size
, priority
, 1, -1);
342 extern void kfree_skbmem(struct sk_buff
*skb
);
343 extern struct sk_buff
*skb_clone(struct sk_buff
*skb
,
345 extern struct sk_buff
*skb_copy(const struct sk_buff
*skb
,
347 extern struct sk_buff
*pskb_copy(struct sk_buff
*skb
,
349 extern int pskb_expand_head(struct sk_buff
*skb
,
350 int nhead
, int ntail
,
352 extern struct sk_buff
*skb_realloc_headroom(struct sk_buff
*skb
,
353 unsigned int headroom
);
354 extern struct sk_buff
*skb_copy_expand(const struct sk_buff
*skb
,
355 int newheadroom
, int newtailroom
,
357 extern int skb_to_sgvec(struct sk_buff
*skb
,
358 struct scatterlist
*sg
, int offset
,
360 extern int skb_cow_data(struct sk_buff
*skb
, int tailbits
,
361 struct sk_buff
**trailer
);
362 extern int skb_pad(struct sk_buff
*skb
, int pad
);
363 #define dev_kfree_skb(a) kfree_skb(a)
364 extern void skb_over_panic(struct sk_buff
*skb
, int len
,
366 extern void skb_under_panic(struct sk_buff
*skb
, int len
,
368 extern void skb_truesize_bug(struct sk_buff
*skb
);
370 static inline void skb_truesize_check(struct sk_buff
*skb
)
372 if (unlikely((int)skb
->truesize
< sizeof(struct sk_buff
) + skb
->len
))
373 skb_truesize_bug(skb
);
376 extern int skb_append_datato_frags(struct sock
*sk
, struct sk_buff
*skb
,
377 int getfrag(void *from
, char *to
, int offset
,
378 int len
,int odd
, struct sk_buff
*skb
),
379 void *from
, int length
);
386 __u32 stepped_offset
;
387 struct sk_buff
*root_skb
;
388 struct sk_buff
*cur_skb
;
392 extern void skb_prepare_seq_read(struct sk_buff
*skb
,
393 unsigned int from
, unsigned int to
,
394 struct skb_seq_state
*st
);
395 extern unsigned int skb_seq_read(unsigned int consumed
, const u8
**data
,
396 struct skb_seq_state
*st
);
397 extern void skb_abort_seq_read(struct skb_seq_state
*st
);
399 extern unsigned int skb_find_text(struct sk_buff
*skb
, unsigned int from
,
400 unsigned int to
, struct ts_config
*config
,
401 struct ts_state
*state
);
403 #ifdef NET_SKBUFF_DATA_USES_OFFSET
404 static inline unsigned char *skb_end_pointer(const struct sk_buff
*skb
)
406 return skb
->head
+ skb
->end
;
409 static inline unsigned char *skb_end_pointer(const struct sk_buff
*skb
)
416 #define skb_shinfo(SKB) ((struct skb_shared_info *)(skb_end_pointer(SKB)))
419 * skb_queue_empty - check if a queue is empty
422 * Returns true if the queue is empty, false otherwise.
424 static inline int skb_queue_empty(const struct sk_buff_head
*list
)
426 return list
->next
== (struct sk_buff
*)list
;
430 * skb_get - reference buffer
431 * @skb: buffer to reference
433 * Makes another reference to a socket buffer and returns a pointer
436 static inline struct sk_buff
*skb_get(struct sk_buff
*skb
)
438 atomic_inc(&skb
->users
);
443 * If users == 1, we are the only owner and are can avoid redundant
448 * skb_cloned - is the buffer a clone
449 * @skb: buffer to check
451 * Returns true if the buffer was generated with skb_clone() and is
452 * one of multiple shared copies of the buffer. Cloned buffers are
453 * shared data so must not be written to under normal circumstances.
455 static inline int skb_cloned(const struct sk_buff
*skb
)
457 return skb
->cloned
&&
458 (atomic_read(&skb_shinfo(skb
)->dataref
) & SKB_DATAREF_MASK
) != 1;
462 * skb_header_cloned - is the header a clone
463 * @skb: buffer to check
465 * Returns true if modifying the header part of the buffer requires
466 * the data to be copied.
468 static inline int skb_header_cloned(const struct sk_buff
*skb
)
475 dataref
= atomic_read(&skb_shinfo(skb
)->dataref
);
476 dataref
= (dataref
& SKB_DATAREF_MASK
) - (dataref
>> SKB_DATAREF_SHIFT
);
481 * skb_header_release - release reference to header
482 * @skb: buffer to operate on
484 * Drop a reference to the header part of the buffer. This is done
485 * by acquiring a payload reference. You must not read from the header
486 * part of skb->data after this.
488 static inline void skb_header_release(struct sk_buff
*skb
)
492 atomic_add(1 << SKB_DATAREF_SHIFT
, &skb_shinfo(skb
)->dataref
);
496 * skb_shared - is the buffer shared
497 * @skb: buffer to check
499 * Returns true if more than one person has a reference to this
502 static inline int skb_shared(const struct sk_buff
*skb
)
504 return atomic_read(&skb
->users
) != 1;
508 * skb_share_check - check if buffer is shared and if so clone it
509 * @skb: buffer to check
510 * @pri: priority for memory allocation
512 * If the buffer is shared the buffer is cloned and the old copy
513 * drops a reference. A new clone with a single reference is returned.
514 * If the buffer is not shared the original buffer is returned. When
515 * being called from interrupt status or with spinlocks held pri must
518 * NULL is returned on a memory allocation failure.
520 static inline struct sk_buff
*skb_share_check(struct sk_buff
*skb
,
523 might_sleep_if(pri
& __GFP_WAIT
);
524 if (skb_shared(skb
)) {
525 struct sk_buff
*nskb
= skb_clone(skb
, pri
);
533 * Copy shared buffers into a new sk_buff. We effectively do COW on
534 * packets to handle cases where we have a local reader and forward
535 * and a couple of other messy ones. The normal one is tcpdumping
536 * a packet thats being forwarded.
540 * skb_unshare - make a copy of a shared buffer
541 * @skb: buffer to check
542 * @pri: priority for memory allocation
544 * If the socket buffer is a clone then this function creates a new
545 * copy of the data, drops a reference count on the old copy and returns
546 * the new copy with the reference count at 1. If the buffer is not a clone
547 * the original buffer is returned. When called with a spinlock held or
548 * from interrupt state @pri must be %GFP_ATOMIC
550 * %NULL is returned on a memory allocation failure.
552 static inline struct sk_buff
*skb_unshare(struct sk_buff
*skb
,
555 might_sleep_if(pri
& __GFP_WAIT
);
556 if (skb_cloned(skb
)) {
557 struct sk_buff
*nskb
= skb_copy(skb
, pri
);
558 kfree_skb(skb
); /* Free our shared copy */
566 * @list_: list to peek at
568 * Peek an &sk_buff. Unlike most other operations you _MUST_
569 * be careful with this one. A peek leaves the buffer on the
570 * list and someone else may run off with it. You must hold
571 * the appropriate locks or have a private queue to do this.
573 * Returns %NULL for an empty list or a pointer to the head element.
574 * The reference count is not incremented and the reference is therefore
575 * volatile. Use with caution.
577 static inline struct sk_buff
*skb_peek(struct sk_buff_head
*list_
)
579 struct sk_buff
*list
= ((struct sk_buff
*)list_
)->next
;
580 if (list
== (struct sk_buff
*)list_
)
587 * @list_: list to peek at
589 * Peek an &sk_buff. Unlike most other operations you _MUST_
590 * be careful with this one. A peek leaves the buffer on the
591 * list and someone else may run off with it. You must hold
592 * the appropriate locks or have a private queue to do this.
594 * Returns %NULL for an empty list or a pointer to the tail element.
595 * The reference count is not incremented and the reference is therefore
596 * volatile. Use with caution.
598 static inline struct sk_buff
*skb_peek_tail(struct sk_buff_head
*list_
)
600 struct sk_buff
*list
= ((struct sk_buff
*)list_
)->prev
;
601 if (list
== (struct sk_buff
*)list_
)
607 * skb_queue_len - get queue length
608 * @list_: list to measure
610 * Return the length of an &sk_buff queue.
612 static inline __u32
skb_queue_len(const struct sk_buff_head
*list_
)
618 * This function creates a split out lock class for each invocation;
619 * this is needed for now since a whole lot of users of the skb-queue
620 * infrastructure in drivers have different locking usage (in hardirq)
621 * than the networking core (in softirq only). In the long run either the
622 * network layer or drivers should need annotation to consolidate the
623 * main types of usage into 3 classes.
625 static inline void skb_queue_head_init(struct sk_buff_head
*list
)
627 spin_lock_init(&list
->lock
);
628 list
->prev
= list
->next
= (struct sk_buff
*)list
;
632 static inline void skb_queue_head_init_class(struct sk_buff_head
*list
,
633 struct lock_class_key
*class)
635 skb_queue_head_init(list
);
636 lockdep_set_class(&list
->lock
, class);
640 * Insert an sk_buff at the start of a list.
642 * The "__skb_xxxx()" functions are the non-atomic ones that
643 * can only be called with interrupts disabled.
647 * __skb_queue_after - queue a buffer at the list head
649 * @prev: place after this buffer
650 * @newsk: buffer to queue
652 * Queue a buffer int the middle of a list. This function takes no locks
653 * and you must therefore hold required locks before calling it.
655 * A buffer cannot be placed on two lists at the same time.
657 static inline void __skb_queue_after(struct sk_buff_head
*list
,
658 struct sk_buff
*prev
,
659 struct sk_buff
*newsk
)
661 struct sk_buff
*next
;
667 next
->prev
= prev
->next
= newsk
;
671 * __skb_queue_head - queue a buffer at the list head
673 * @newsk: buffer to queue
675 * Queue a buffer at the start of a list. This function takes no locks
676 * and you must therefore hold required locks before calling it.
678 * A buffer cannot be placed on two lists at the same time.
680 extern void skb_queue_head(struct sk_buff_head
*list
, struct sk_buff
*newsk
);
681 static inline void __skb_queue_head(struct sk_buff_head
*list
,
682 struct sk_buff
*newsk
)
684 __skb_queue_after(list
, (struct sk_buff
*)list
, newsk
);
688 * __skb_queue_tail - queue a buffer at the list tail
690 * @newsk: buffer to queue
692 * Queue a buffer at the end of a list. This function takes no locks
693 * and you must therefore hold required locks before calling it.
695 * A buffer cannot be placed on two lists at the same time.
697 extern void skb_queue_tail(struct sk_buff_head
*list
, struct sk_buff
*newsk
);
698 static inline void __skb_queue_tail(struct sk_buff_head
*list
,
699 struct sk_buff
*newsk
)
701 struct sk_buff
*prev
, *next
;
704 next
= (struct sk_buff
*)list
;
708 next
->prev
= prev
->next
= newsk
;
713 * __skb_dequeue - remove from the head of the queue
714 * @list: list to dequeue from
716 * Remove the head of the list. This function does not take any locks
717 * so must be used with appropriate locks held only. The head item is
718 * returned or %NULL if the list is empty.
720 extern struct sk_buff
*skb_dequeue(struct sk_buff_head
*list
);
721 static inline struct sk_buff
*__skb_dequeue(struct sk_buff_head
*list
)
723 struct sk_buff
*next
, *prev
, *result
;
725 prev
= (struct sk_buff
*) list
;
734 result
->next
= result
->prev
= NULL
;
741 * Insert a packet on a list.
743 extern void skb_insert(struct sk_buff
*old
, struct sk_buff
*newsk
, struct sk_buff_head
*list
);
744 static inline void __skb_insert(struct sk_buff
*newsk
,
745 struct sk_buff
*prev
, struct sk_buff
*next
,
746 struct sk_buff_head
*list
)
750 next
->prev
= prev
->next
= newsk
;
755 * Place a packet after a given packet in a list.
757 extern void skb_append(struct sk_buff
*old
, struct sk_buff
*newsk
, struct sk_buff_head
*list
);
758 static inline void __skb_append(struct sk_buff
*old
, struct sk_buff
*newsk
, struct sk_buff_head
*list
)
760 __skb_insert(newsk
, old
, old
->next
, list
);
764 * remove sk_buff from list. _Must_ be called atomically, and with
767 extern void skb_unlink(struct sk_buff
*skb
, struct sk_buff_head
*list
);
768 static inline void __skb_unlink(struct sk_buff
*skb
, struct sk_buff_head
*list
)
770 struct sk_buff
*next
, *prev
;
775 skb
->next
= skb
->prev
= NULL
;
781 /* XXX: more streamlined implementation */
784 * __skb_dequeue_tail - remove from the tail of the queue
785 * @list: list to dequeue from
787 * Remove the tail of the list. This function does not take any locks
788 * so must be used with appropriate locks held only. The tail item is
789 * returned or %NULL if the list is empty.
791 extern struct sk_buff
*skb_dequeue_tail(struct sk_buff_head
*list
);
792 static inline struct sk_buff
*__skb_dequeue_tail(struct sk_buff_head
*list
)
794 struct sk_buff
*skb
= skb_peek_tail(list
);
796 __skb_unlink(skb
, list
);
801 static inline int skb_is_nonlinear(const struct sk_buff
*skb
)
803 return skb
->data_len
;
806 static inline unsigned int skb_headlen(const struct sk_buff
*skb
)
808 return skb
->len
- skb
->data_len
;
811 static inline int skb_pagelen(const struct sk_buff
*skb
)
815 for (i
= (int)skb_shinfo(skb
)->nr_frags
- 1; i
>= 0; i
--)
816 len
+= skb_shinfo(skb
)->frags
[i
].size
;
817 return len
+ skb_headlen(skb
);
820 static inline void skb_fill_page_desc(struct sk_buff
*skb
, int i
,
821 struct page
*page
, int off
, int size
)
823 skb_frag_t
*frag
= &skb_shinfo(skb
)->frags
[i
];
826 frag
->page_offset
= off
;
828 skb_shinfo(skb
)->nr_frags
= i
+ 1;
831 #define SKB_PAGE_ASSERT(skb) BUG_ON(skb_shinfo(skb)->nr_frags)
832 #define SKB_FRAG_ASSERT(skb) BUG_ON(skb_shinfo(skb)->frag_list)
833 #define SKB_LINEAR_ASSERT(skb) BUG_ON(skb_is_nonlinear(skb))
835 #ifdef NET_SKBUFF_DATA_USES_OFFSET
836 static inline unsigned char *skb_tail_pointer(const struct sk_buff
*skb
)
838 return skb
->head
+ skb
->tail
;
841 static inline void skb_reset_tail_pointer(struct sk_buff
*skb
)
843 skb
->tail
= skb
->data
- skb
->head
;
846 static inline void skb_set_tail_pointer(struct sk_buff
*skb
, const int offset
)
848 skb_reset_tail_pointer(skb
);
851 #else /* NET_SKBUFF_DATA_USES_OFFSET */
852 static inline unsigned char *skb_tail_pointer(const struct sk_buff
*skb
)
857 static inline void skb_reset_tail_pointer(struct sk_buff
*skb
)
859 skb
->tail
= skb
->data
;
862 static inline void skb_set_tail_pointer(struct sk_buff
*skb
, const int offset
)
864 skb
->tail
= skb
->data
+ offset
;
867 #endif /* NET_SKBUFF_DATA_USES_OFFSET */
870 * Add data to an sk_buff
872 static inline unsigned char *__skb_put(struct sk_buff
*skb
, unsigned int len
)
874 unsigned char *tmp
= skb_tail_pointer(skb
);
875 SKB_LINEAR_ASSERT(skb
);
882 * skb_put - add data to a buffer
883 * @skb: buffer to use
884 * @len: amount of data to add
886 * This function extends the used data area of the buffer. If this would
887 * exceed the total buffer size the kernel will panic. A pointer to the
888 * first byte of the extra data is returned.
890 static inline unsigned char *skb_put(struct sk_buff
*skb
, unsigned int len
)
892 unsigned char *tmp
= skb_tail_pointer(skb
);
893 SKB_LINEAR_ASSERT(skb
);
896 if (unlikely(skb
->tail
> skb
->end
))
897 skb_over_panic(skb
, len
, current_text_addr());
901 static inline unsigned char *__skb_push(struct sk_buff
*skb
, unsigned int len
)
909 * skb_push - add data to the start of a buffer
910 * @skb: buffer to use
911 * @len: amount of data to add
913 * This function extends the used data area of the buffer at the buffer
914 * start. If this would exceed the total buffer headroom the kernel will
915 * panic. A pointer to the first byte of the extra data is returned.
917 static inline unsigned char *skb_push(struct sk_buff
*skb
, unsigned int len
)
921 if (unlikely(skb
->data
<skb
->head
))
922 skb_under_panic(skb
, len
, current_text_addr());
926 static inline unsigned char *__skb_pull(struct sk_buff
*skb
, unsigned int len
)
929 BUG_ON(skb
->len
< skb
->data_len
);
930 return skb
->data
+= len
;
934 * skb_pull - remove data from the start of a buffer
935 * @skb: buffer to use
936 * @len: amount of data to remove
938 * This function removes data from the start of a buffer, returning
939 * the memory to the headroom. A pointer to the next data in the buffer
940 * is returned. Once the data has been pulled future pushes will overwrite
943 static inline unsigned char *skb_pull(struct sk_buff
*skb
, unsigned int len
)
945 return unlikely(len
> skb
->len
) ? NULL
: __skb_pull(skb
, len
);
948 extern unsigned char *__pskb_pull_tail(struct sk_buff
*skb
, int delta
);
950 static inline unsigned char *__pskb_pull(struct sk_buff
*skb
, unsigned int len
)
952 if (len
> skb_headlen(skb
) &&
953 !__pskb_pull_tail(skb
, len
-skb_headlen(skb
)))
956 return skb
->data
+= len
;
959 static inline unsigned char *pskb_pull(struct sk_buff
*skb
, unsigned int len
)
961 return unlikely(len
> skb
->len
) ? NULL
: __pskb_pull(skb
, len
);
964 static inline int pskb_may_pull(struct sk_buff
*skb
, unsigned int len
)
966 if (likely(len
<= skb_headlen(skb
)))
968 if (unlikely(len
> skb
->len
))
970 return __pskb_pull_tail(skb
, len
-skb_headlen(skb
)) != NULL
;
974 * skb_headroom - bytes at buffer head
975 * @skb: buffer to check
977 * Return the number of bytes of free space at the head of an &sk_buff.
979 static inline int skb_headroom(const struct sk_buff
*skb
)
981 return skb
->data
- skb
->head
;
985 * skb_tailroom - bytes at buffer end
986 * @skb: buffer to check
988 * Return the number of bytes of free space at the tail of an sk_buff
990 static inline int skb_tailroom(const struct sk_buff
*skb
)
992 return skb_is_nonlinear(skb
) ? 0 : skb
->end
- skb
->tail
;
996 * skb_reserve - adjust headroom
997 * @skb: buffer to alter
998 * @len: bytes to move
1000 * Increase the headroom of an empty &sk_buff by reducing the tail
1001 * room. This is only allowed for an empty buffer.
1003 static inline void skb_reserve(struct sk_buff
*skb
, int len
)
1009 #ifdef NET_SKBUFF_DATA_USES_OFFSET
1010 static inline unsigned char *skb_transport_header(const struct sk_buff
*skb
)
1012 return skb
->head
+ skb
->transport_header
;
1015 static inline void skb_reset_transport_header(struct sk_buff
*skb
)
1017 skb
->transport_header
= skb
->data
- skb
->head
;
1020 static inline void skb_set_transport_header(struct sk_buff
*skb
,
1023 skb_reset_transport_header(skb
);
1024 skb
->transport_header
+= offset
;
1027 static inline unsigned char *skb_network_header(const struct sk_buff
*skb
)
1029 return skb
->head
+ skb
->network_header
;
1032 static inline void skb_reset_network_header(struct sk_buff
*skb
)
1034 skb
->network_header
= skb
->data
- skb
->head
;
1037 static inline void skb_set_network_header(struct sk_buff
*skb
, const int offset
)
1039 skb_reset_network_header(skb
);
1040 skb
->network_header
+= offset
;
1043 static inline unsigned char *skb_mac_header(const struct sk_buff
*skb
)
1045 return skb
->head
+ skb
->mac_header
;
1048 static inline int skb_mac_header_was_set(const struct sk_buff
*skb
)
1050 return skb
->mac_header
!= ~0U;
1053 static inline void skb_reset_mac_header(struct sk_buff
*skb
)
1055 skb
->mac_header
= skb
->data
- skb
->head
;
1058 static inline void skb_set_mac_header(struct sk_buff
*skb
, const int offset
)
1060 skb_reset_mac_header(skb
);
1061 skb
->mac_header
+= offset
;
1064 #else /* NET_SKBUFF_DATA_USES_OFFSET */
1066 static inline unsigned char *skb_transport_header(const struct sk_buff
*skb
)
1068 return skb
->transport_header
;
1071 static inline void skb_reset_transport_header(struct sk_buff
*skb
)
1073 skb
->transport_header
= skb
->data
;
1076 static inline void skb_set_transport_header(struct sk_buff
*skb
,
1079 skb
->transport_header
= skb
->data
+ offset
;
1082 static inline unsigned char *skb_network_header(const struct sk_buff
*skb
)
1084 return skb
->network_header
;
1087 static inline void skb_reset_network_header(struct sk_buff
*skb
)
1089 skb
->network_header
= skb
->data
;
1092 static inline void skb_set_network_header(struct sk_buff
*skb
, const int offset
)
1094 skb
->network_header
= skb
->data
+ offset
;
1097 static inline unsigned char *skb_mac_header(const struct sk_buff
*skb
)
1099 return skb
->mac_header
;
1102 static inline int skb_mac_header_was_set(const struct sk_buff
*skb
)
1104 return skb
->mac_header
!= NULL
;
1107 static inline void skb_reset_mac_header(struct sk_buff
*skb
)
1109 skb
->mac_header
= skb
->data
;
1112 static inline void skb_set_mac_header(struct sk_buff
*skb
, const int offset
)
1114 skb
->mac_header
= skb
->data
+ offset
;
1116 #endif /* NET_SKBUFF_DATA_USES_OFFSET */
1118 static inline int skb_transport_offset(const struct sk_buff
*skb
)
1120 return skb_transport_header(skb
) - skb
->data
;
1123 static inline u32
skb_network_header_len(const struct sk_buff
*skb
)
1125 return skb
->transport_header
- skb
->network_header
;
1128 static inline int skb_network_offset(const struct sk_buff
*skb
)
1130 return skb_network_header(skb
) - skb
->data
;
1134 * CPUs often take a performance hit when accessing unaligned memory
1135 * locations. The actual performance hit varies, it can be small if the
1136 * hardware handles it or large if we have to take an exception and fix it
1139 * Since an ethernet header is 14 bytes network drivers often end up with
1140 * the IP header at an unaligned offset. The IP header can be aligned by
1141 * shifting the start of the packet by 2 bytes. Drivers should do this
1144 * skb_reserve(NET_IP_ALIGN);
1146 * The downside to this alignment of the IP header is that the DMA is now
1147 * unaligned. On some architectures the cost of an unaligned DMA is high
1148 * and this cost outweighs the gains made by aligning the IP header.
1150 * Since this trade off varies between architectures, we allow NET_IP_ALIGN
1153 #ifndef NET_IP_ALIGN
1154 #define NET_IP_ALIGN 2
1158 * The networking layer reserves some headroom in skb data (via
1159 * dev_alloc_skb). This is used to avoid having to reallocate skb data when
1160 * the header has to grow. In the default case, if the header has to grow
1161 * 16 bytes or less we avoid the reallocation.
1163 * Unfortunately this headroom changes the DMA alignment of the resulting
1164 * network packet. As for NET_IP_ALIGN, this unaligned DMA is expensive
1165 * on some architectures. An architecture can override this value,
1166 * perhaps setting it to a cacheline in size (since that will maintain
1167 * cacheline alignment of the DMA). It must be a power of 2.
1169 * Various parts of the networking layer expect at least 16 bytes of
1170 * headroom, you should not reduce this.
1173 #define NET_SKB_PAD 16
1176 extern int ___pskb_trim(struct sk_buff
*skb
, unsigned int len
);
1178 static inline void __skb_trim(struct sk_buff
*skb
, unsigned int len
)
1180 if (unlikely(skb
->data_len
)) {
1185 skb_set_tail_pointer(skb
, len
);
1189 * skb_trim - remove end from a buffer
1190 * @skb: buffer to alter
1193 * Cut the length of a buffer down by removing data from the tail. If
1194 * the buffer is already under the length specified it is not modified.
1195 * The skb must be linear.
1197 static inline void skb_trim(struct sk_buff
*skb
, unsigned int len
)
1200 __skb_trim(skb
, len
);
1204 static inline int __pskb_trim(struct sk_buff
*skb
, unsigned int len
)
1207 return ___pskb_trim(skb
, len
);
1208 __skb_trim(skb
, len
);
1212 static inline int pskb_trim(struct sk_buff
*skb
, unsigned int len
)
1214 return (len
< skb
->len
) ? __pskb_trim(skb
, len
) : 0;
1218 * pskb_trim_unique - remove end from a paged unique (not cloned) buffer
1219 * @skb: buffer to alter
1222 * This is identical to pskb_trim except that the caller knows that
1223 * the skb is not cloned so we should never get an error due to out-
1226 static inline void pskb_trim_unique(struct sk_buff
*skb
, unsigned int len
)
1228 int err
= pskb_trim(skb
, len
);
1233 * skb_orphan - orphan a buffer
1234 * @skb: buffer to orphan
1236 * If a buffer currently has an owner then we call the owner's
1237 * destructor function and make the @skb unowned. The buffer continues
1238 * to exist but is no longer charged to its former owner.
1240 static inline void skb_orphan(struct sk_buff
*skb
)
1242 if (skb
->destructor
)
1243 skb
->destructor(skb
);
1244 skb
->destructor
= NULL
;
1249 * __skb_queue_purge - empty a list
1250 * @list: list to empty
1252 * Delete all buffers on an &sk_buff list. Each buffer is removed from
1253 * the list and one reference dropped. This function does not take the
1254 * list lock and the caller must hold the relevant locks to use it.
1256 extern void skb_queue_purge(struct sk_buff_head
*list
);
1257 static inline void __skb_queue_purge(struct sk_buff_head
*list
)
1259 struct sk_buff
*skb
;
1260 while ((skb
= __skb_dequeue(list
)) != NULL
)
1265 * __dev_alloc_skb - allocate an skbuff for receiving
1266 * @length: length to allocate
1267 * @gfp_mask: get_free_pages mask, passed to alloc_skb
1269 * Allocate a new &sk_buff and assign it a usage count of one. The
1270 * buffer has unspecified headroom built in. Users should allocate
1271 * the headroom they think they need without accounting for the
1272 * built in space. The built in space is used for optimisations.
1274 * %NULL is returned if there is no free memory.
1276 static inline struct sk_buff
*__dev_alloc_skb(unsigned int length
,
1279 struct sk_buff
*skb
= alloc_skb(length
+ NET_SKB_PAD
, gfp_mask
);
1281 skb_reserve(skb
, NET_SKB_PAD
);
1286 * dev_alloc_skb - allocate an skbuff for receiving
1287 * @length: length to allocate
1289 * Allocate a new &sk_buff and assign it a usage count of one. The
1290 * buffer has unspecified headroom built in. Users should allocate
1291 * the headroom they think they need without accounting for the
1292 * built in space. The built in space is used for optimisations.
1294 * %NULL is returned if there is no free memory. Although this function
1295 * allocates memory it can be called from an interrupt.
1297 static inline struct sk_buff
*dev_alloc_skb(unsigned int length
)
1299 return __dev_alloc_skb(length
, GFP_ATOMIC
);
1302 extern struct sk_buff
*__netdev_alloc_skb(struct net_device
*dev
,
1303 unsigned int length
, gfp_t gfp_mask
);
1306 * netdev_alloc_skb - allocate an skbuff for rx on a specific device
1307 * @dev: network device to receive on
1308 * @length: length to allocate
1310 * Allocate a new &sk_buff and assign it a usage count of one. The
1311 * buffer has unspecified headroom built in. Users should allocate
1312 * the headroom they think they need without accounting for the
1313 * built in space. The built in space is used for optimisations.
1315 * %NULL is returned if there is no free memory. Although this function
1316 * allocates memory it can be called from an interrupt.
1318 static inline struct sk_buff
*netdev_alloc_skb(struct net_device
*dev
,
1319 unsigned int length
)
1321 return __netdev_alloc_skb(dev
, length
, GFP_ATOMIC
);
1325 * skb_cow - copy header of skb when it is required
1326 * @skb: buffer to cow
1327 * @headroom: needed headroom
1329 * If the skb passed lacks sufficient headroom or its data part
1330 * is shared, data is reallocated. If reallocation fails, an error
1331 * is returned and original skb is not changed.
1333 * The result is skb with writable area skb->head...skb->tail
1334 * and at least @headroom of space at head.
1336 static inline int skb_cow(struct sk_buff
*skb
, unsigned int headroom
)
1338 int delta
= (headroom
> NET_SKB_PAD
? headroom
: NET_SKB_PAD
) -
1344 if (delta
|| skb_cloned(skb
))
1345 return pskb_expand_head(skb
, (delta
+ (NET_SKB_PAD
-1)) &
1346 ~(NET_SKB_PAD
-1), 0, GFP_ATOMIC
);
1351 * skb_padto - pad an skbuff up to a minimal size
1352 * @skb: buffer to pad
1353 * @len: minimal length
1355 * Pads up a buffer to ensure the trailing bytes exist and are
1356 * blanked. If the buffer already contains sufficient data it
1357 * is untouched. Otherwise it is extended. Returns zero on
1358 * success. The skb is freed on error.
1361 static inline int skb_padto(struct sk_buff
*skb
, unsigned int len
)
1363 unsigned int size
= skb
->len
;
1364 if (likely(size
>= len
))
1366 return skb_pad(skb
, len
-size
);
1369 static inline int skb_add_data(struct sk_buff
*skb
,
1370 char __user
*from
, int copy
)
1372 const int off
= skb
->len
;
1374 if (skb
->ip_summed
== CHECKSUM_NONE
) {
1376 __wsum csum
= csum_and_copy_from_user(from
, skb_put(skb
, copy
),
1379 skb
->csum
= csum_block_add(skb
->csum
, csum
, off
);
1382 } else if (!copy_from_user(skb_put(skb
, copy
), from
, copy
))
1385 __skb_trim(skb
, off
);
1389 static inline int skb_can_coalesce(struct sk_buff
*skb
, int i
,
1390 struct page
*page
, int off
)
1393 struct skb_frag_struct
*frag
= &skb_shinfo(skb
)->frags
[i
- 1];
1395 return page
== frag
->page
&&
1396 off
== frag
->page_offset
+ frag
->size
;
1401 static inline int __skb_linearize(struct sk_buff
*skb
)
1403 return __pskb_pull_tail(skb
, skb
->data_len
) ? 0 : -ENOMEM
;
1407 * skb_linearize - convert paged skb to linear one
1408 * @skb: buffer to linarize
1410 * If there is no free memory -ENOMEM is returned, otherwise zero
1411 * is returned and the old skb data released.
1413 static inline int skb_linearize(struct sk_buff
*skb
)
1415 return skb_is_nonlinear(skb
) ? __skb_linearize(skb
) : 0;
1419 * skb_linearize_cow - make sure skb is linear and writable
1420 * @skb: buffer to process
1422 * If there is no free memory -ENOMEM is returned, otherwise zero
1423 * is returned and the old skb data released.
1425 static inline int skb_linearize_cow(struct sk_buff
*skb
)
1427 return skb_is_nonlinear(skb
) || skb_cloned(skb
) ?
1428 __skb_linearize(skb
) : 0;
1432 * skb_postpull_rcsum - update checksum for received skb after pull
1433 * @skb: buffer to update
1434 * @start: start of data before pull
1435 * @len: length of data pulled
1437 * After doing a pull on a received packet, you need to call this to
1438 * update the CHECKSUM_COMPLETE checksum, or set ip_summed to
1439 * CHECKSUM_NONE so that it can be recomputed from scratch.
1442 static inline void skb_postpull_rcsum(struct sk_buff
*skb
,
1443 const void *start
, unsigned int len
)
1445 if (skb
->ip_summed
== CHECKSUM_COMPLETE
)
1446 skb
->csum
= csum_sub(skb
->csum
, csum_partial(start
, len
, 0));
1449 unsigned char *skb_pull_rcsum(struct sk_buff
*skb
, unsigned int len
);
1452 * pskb_trim_rcsum - trim received skb and update checksum
1453 * @skb: buffer to trim
1456 * This is exactly the same as pskb_trim except that it ensures the
1457 * checksum of received packets are still valid after the operation.
1460 static inline int pskb_trim_rcsum(struct sk_buff
*skb
, unsigned int len
)
1462 if (likely(len
>= skb
->len
))
1464 if (skb
->ip_summed
== CHECKSUM_COMPLETE
)
1465 skb
->ip_summed
= CHECKSUM_NONE
;
1466 return __pskb_trim(skb
, len
);
1469 #define skb_queue_walk(queue, skb) \
1470 for (skb = (queue)->next; \
1471 prefetch(skb->next), (skb != (struct sk_buff *)(queue)); \
1474 #define skb_queue_reverse_walk(queue, skb) \
1475 for (skb = (queue)->prev; \
1476 prefetch(skb->prev), (skb != (struct sk_buff *)(queue)); \
1480 extern struct sk_buff
*skb_recv_datagram(struct sock
*sk
, unsigned flags
,
1481 int noblock
, int *err
);
1482 extern unsigned int datagram_poll(struct file
*file
, struct socket
*sock
,
1483 struct poll_table_struct
*wait
);
1484 extern int skb_copy_datagram_iovec(const struct sk_buff
*from
,
1485 int offset
, struct iovec
*to
,
1487 extern int skb_copy_and_csum_datagram_iovec(struct sk_buff
*skb
,
1490 extern void skb_free_datagram(struct sock
*sk
, struct sk_buff
*skb
);
1491 extern void skb_kill_datagram(struct sock
*sk
, struct sk_buff
*skb
,
1492 unsigned int flags
);
1493 extern __wsum
skb_checksum(const struct sk_buff
*skb
, int offset
,
1494 int len
, __wsum csum
);
1495 extern int skb_copy_bits(const struct sk_buff
*skb
, int offset
,
1497 extern int skb_store_bits(const struct sk_buff
*skb
, int offset
,
1498 void *from
, int len
);
1499 extern __wsum
skb_copy_and_csum_bits(const struct sk_buff
*skb
,
1500 int offset
, u8
*to
, int len
,
1502 extern void skb_copy_and_csum_dev(const struct sk_buff
*skb
, u8
*to
);
1503 extern void skb_split(struct sk_buff
*skb
,
1504 struct sk_buff
*skb1
, const u32 len
);
1506 extern struct sk_buff
*skb_segment(struct sk_buff
*skb
, int features
);
1508 static inline void *skb_header_pointer(const struct sk_buff
*skb
, int offset
,
1509 int len
, void *buffer
)
1511 int hlen
= skb_headlen(skb
);
1513 if (hlen
- offset
>= len
)
1514 return skb
->data
+ offset
;
1516 if (skb_copy_bits(skb
, offset
, buffer
, len
) < 0)
1522 static inline void skb_copy_from_linear_data(const struct sk_buff
*skb
,
1524 const unsigned int len
)
1526 memcpy(to
, skb
->data
, len
);
1529 static inline void skb_copy_from_linear_data_offset(const struct sk_buff
*skb
,
1530 const int offset
, void *to
,
1531 const unsigned int len
)
1533 memcpy(to
, skb
->data
+ offset
, len
);
1536 static inline void skb_copy_to_linear_data(struct sk_buff
*skb
,
1538 const unsigned int len
)
1540 memcpy(skb
->data
, from
, len
);
1543 static inline void skb_copy_to_linear_data_offset(struct sk_buff
*skb
,
1546 const unsigned int len
)
1548 memcpy(skb
->data
+ offset
, from
, len
);
1551 extern void skb_init(void);
1554 * skb_get_timestamp - get timestamp from a skb
1555 * @skb: skb to get stamp from
1556 * @stamp: pointer to struct timeval to store stamp in
1558 * Timestamps are stored in the skb as offsets to a base timestamp.
1559 * This function converts the offset back to a struct timeval and stores
1562 static inline void skb_get_timestamp(const struct sk_buff
*skb
, struct timeval
*stamp
)
1564 *stamp
= ktime_to_timeval(skb
->tstamp
);
1567 static inline void __net_timestamp(struct sk_buff
*skb
)
1569 skb
->tstamp
= ktime_get_real();
1573 extern __sum16
__skb_checksum_complete_head(struct sk_buff
*skb
, int len
);
1574 extern __sum16
__skb_checksum_complete(struct sk_buff
*skb
);
1576 static inline int skb_csum_unnecessary(const struct sk_buff
*skb
)
1578 return skb
->ip_summed
& CHECKSUM_UNNECESSARY
;
1582 * skb_checksum_complete - Calculate checksum of an entire packet
1583 * @skb: packet to process
1585 * This function calculates the checksum over the entire packet plus
1586 * the value of skb->csum. The latter can be used to supply the
1587 * checksum of a pseudo header as used by TCP/UDP. It returns the
1590 * For protocols that contain complete checksums such as ICMP/TCP/UDP,
1591 * this function can be used to verify that checksum on received
1592 * packets. In that case the function should return zero if the
1593 * checksum is correct. In particular, this function will return zero
1594 * if skb->ip_summed is CHECKSUM_UNNECESSARY which indicates that the
1595 * hardware has already verified the correctness of the checksum.
1597 static inline unsigned int skb_checksum_complete(struct sk_buff
*skb
)
1599 return skb_csum_unnecessary(skb
) ?
1600 0 : __skb_checksum_complete(skb
);
1603 #if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
1604 extern void nf_conntrack_destroy(struct nf_conntrack
*nfct
);
1605 static inline void nf_conntrack_put(struct nf_conntrack
*nfct
)
1607 if (nfct
&& atomic_dec_and_test(&nfct
->use
))
1608 nf_conntrack_destroy(nfct
);
1610 static inline void nf_conntrack_get(struct nf_conntrack
*nfct
)
1613 atomic_inc(&nfct
->use
);
1615 static inline void nf_conntrack_get_reasm(struct sk_buff
*skb
)
1618 atomic_inc(&skb
->users
);
1620 static inline void nf_conntrack_put_reasm(struct sk_buff
*skb
)
1626 #ifdef CONFIG_BRIDGE_NETFILTER
1627 static inline void nf_bridge_put(struct nf_bridge_info
*nf_bridge
)
1629 if (nf_bridge
&& atomic_dec_and_test(&nf_bridge
->use
))
1632 static inline void nf_bridge_get(struct nf_bridge_info
*nf_bridge
)
1635 atomic_inc(&nf_bridge
->use
);
1637 #endif /* CONFIG_BRIDGE_NETFILTER */
1638 static inline void nf_reset(struct sk_buff
*skb
)
1640 #if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
1641 nf_conntrack_put(skb
->nfct
);
1643 nf_conntrack_put_reasm(skb
->nfct_reasm
);
1644 skb
->nfct_reasm
= NULL
;
1646 #ifdef CONFIG_BRIDGE_NETFILTER
1647 nf_bridge_put(skb
->nf_bridge
);
1648 skb
->nf_bridge
= NULL
;
1652 /* Note: This doesn't put any conntrack and bridge info in dst. */
1653 static inline void __nf_copy(struct sk_buff
*dst
, const struct sk_buff
*src
)
1655 #if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
1656 dst
->nfct
= src
->nfct
;
1657 nf_conntrack_get(src
->nfct
);
1658 dst
->nfctinfo
= src
->nfctinfo
;
1659 dst
->nfct_reasm
= src
->nfct_reasm
;
1660 nf_conntrack_get_reasm(src
->nfct_reasm
);
1662 #ifdef CONFIG_BRIDGE_NETFILTER
1663 dst
->nf_bridge
= src
->nf_bridge
;
1664 nf_bridge_get(src
->nf_bridge
);
1668 static inline void nf_copy(struct sk_buff
*dst
, const struct sk_buff
*src
)
1670 #if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
1671 nf_conntrack_put(dst
->nfct
);
1672 nf_conntrack_put_reasm(dst
->nfct_reasm
);
1674 #ifdef CONFIG_BRIDGE_NETFILTER
1675 nf_bridge_put(dst
->nf_bridge
);
1677 __nf_copy(dst
, src
);
1680 #ifdef CONFIG_NETWORK_SECMARK
1681 static inline void skb_copy_secmark(struct sk_buff
*to
, const struct sk_buff
*from
)
1683 to
->secmark
= from
->secmark
;
1686 static inline void skb_init_secmark(struct sk_buff
*skb
)
1691 static inline void skb_copy_secmark(struct sk_buff
*to
, const struct sk_buff
*from
)
1694 static inline void skb_init_secmark(struct sk_buff
*skb
)
1698 static inline int skb_is_gso(const struct sk_buff
*skb
)
1700 return skb_shinfo(skb
)->gso_size
;
1703 static inline void skb_forward_csum(struct sk_buff
*skb
)
1705 /* Unfortunately we don't support this one. Any brave souls? */
1706 if (skb
->ip_summed
== CHECKSUM_COMPLETE
)
1707 skb
->ip_summed
= CHECKSUM_NONE
;
1710 #endif /* __KERNEL__ */
1711 #endif /* _LINUX_SKBUFF_H */