]> git.proxmox.com Git - mirror_ubuntu-bionic-kernel.git/blob - include/linux/topology.h
Merge branch 'x86-reboot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
[mirror_ubuntu-bionic-kernel.git] / include / linux / topology.h
1 /*
2 * include/linux/topology.h
3 *
4 * Written by: Matthew Dobson, IBM Corporation
5 *
6 * Copyright (C) 2002, IBM Corp.
7 *
8 * All rights reserved.
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
14 *
15 * This program is distributed in the hope that it will be useful, but
16 * WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
18 * NON INFRINGEMENT. See the GNU General Public License for more
19 * details.
20 *
21 * You should have received a copy of the GNU General Public License
22 * along with this program; if not, write to the Free Software
23 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
24 *
25 * Send feedback to <colpatch@us.ibm.com>
26 */
27 #ifndef _LINUX_TOPOLOGY_H
28 #define _LINUX_TOPOLOGY_H
29
30 #include <linux/cpumask.h>
31 #include <linux/bitops.h>
32 #include <linux/mmzone.h>
33 #include <linux/smp.h>
34 #include <linux/percpu.h>
35 #include <asm/topology.h>
36
37 #ifndef node_has_online_mem
38 #define node_has_online_mem(nid) (1)
39 #endif
40
41 #ifndef nr_cpus_node
42 #define nr_cpus_node(node) cpumask_weight(cpumask_of_node(node))
43 #endif
44
45 #define for_each_node_with_cpus(node) \
46 for_each_online_node(node) \
47 if (nr_cpus_node(node))
48
49 int arch_update_cpu_topology(void);
50
51 /* Conform to ACPI 2.0 SLIT distance definitions */
52 #define LOCAL_DISTANCE 10
53 #define REMOTE_DISTANCE 20
54 #ifndef node_distance
55 #define node_distance(from,to) ((from) == (to) ? LOCAL_DISTANCE : REMOTE_DISTANCE)
56 #endif
57 #ifndef RECLAIM_DISTANCE
58 /*
59 * If the distance between nodes in a system is larger than RECLAIM_DISTANCE
60 * (in whatever arch specific measurement units returned by node_distance())
61 * then switch on zone reclaim on boot.
62 */
63 #define RECLAIM_DISTANCE 30
64 #endif
65 #ifndef PENALTY_FOR_NODE_WITH_CPUS
66 #define PENALTY_FOR_NODE_WITH_CPUS (1)
67 #endif
68
69 /*
70 * Below are the 3 major initializers used in building sched_domains:
71 * SD_SIBLING_INIT, for SMT domains
72 * SD_CPU_INIT, for SMP domains
73 *
74 * Any architecture that cares to do any tuning to these values should do so
75 * by defining their own arch-specific initializer in include/asm/topology.h.
76 * A definition there will automagically override these default initializers
77 * and allow arch-specific performance tuning of sched_domains.
78 * (Only non-zero and non-null fields need be specified.)
79 */
80
81 #ifdef CONFIG_SCHED_SMT
82 /* MCD - Do we really need this? It is always on if CONFIG_SCHED_SMT is,
83 * so can't we drop this in favor of CONFIG_SCHED_SMT?
84 */
85 #define ARCH_HAS_SCHED_WAKE_IDLE
86 /* Common values for SMT siblings */
87 #ifndef SD_SIBLING_INIT
88 #define SD_SIBLING_INIT (struct sched_domain) { \
89 .min_interval = 1, \
90 .max_interval = 2, \
91 .busy_factor = 64, \
92 .imbalance_pct = 110, \
93 \
94 .flags = 1*SD_LOAD_BALANCE \
95 | 1*SD_BALANCE_NEWIDLE \
96 | 1*SD_BALANCE_EXEC \
97 | 1*SD_BALANCE_FORK \
98 | 0*SD_BALANCE_WAKE \
99 | 1*SD_WAKE_AFFINE \
100 | 1*SD_SHARE_CPUPOWER \
101 | 1*SD_SHARE_PKG_RESOURCES \
102 | 0*SD_SERIALIZE \
103 | 0*SD_PREFER_SIBLING \
104 | arch_sd_sibling_asym_packing() \
105 , \
106 .last_balance = jiffies, \
107 .balance_interval = 1, \
108 .smt_gain = 1178, /* 15% */ \
109 }
110 #endif
111 #endif /* CONFIG_SCHED_SMT */
112
113 #ifdef CONFIG_SCHED_MC
114 /* Common values for MC siblings. for now mostly derived from SD_CPU_INIT */
115 #ifndef SD_MC_INIT
116 #define SD_MC_INIT (struct sched_domain) { \
117 .min_interval = 1, \
118 .max_interval = 4, \
119 .busy_factor = 64, \
120 .imbalance_pct = 125, \
121 .cache_nice_tries = 1, \
122 .busy_idx = 2, \
123 .wake_idx = 0, \
124 .forkexec_idx = 0, \
125 \
126 .flags = 1*SD_LOAD_BALANCE \
127 | 1*SD_BALANCE_NEWIDLE \
128 | 1*SD_BALANCE_EXEC \
129 | 1*SD_BALANCE_FORK \
130 | 0*SD_BALANCE_WAKE \
131 | 1*SD_WAKE_AFFINE \
132 | 0*SD_PREFER_LOCAL \
133 | 0*SD_SHARE_CPUPOWER \
134 | 1*SD_SHARE_PKG_RESOURCES \
135 | 0*SD_SERIALIZE \
136 , \
137 .last_balance = jiffies, \
138 .balance_interval = 1, \
139 }
140 #endif
141 #endif /* CONFIG_SCHED_MC */
142
143 /* Common values for CPUs */
144 #ifndef SD_CPU_INIT
145 #define SD_CPU_INIT (struct sched_domain) { \
146 .min_interval = 1, \
147 .max_interval = 4, \
148 .busy_factor = 64, \
149 .imbalance_pct = 125, \
150 .cache_nice_tries = 1, \
151 .busy_idx = 2, \
152 .idle_idx = 1, \
153 .newidle_idx = 0, \
154 .wake_idx = 0, \
155 .forkexec_idx = 0, \
156 \
157 .flags = 1*SD_LOAD_BALANCE \
158 | 1*SD_BALANCE_NEWIDLE \
159 | 1*SD_BALANCE_EXEC \
160 | 1*SD_BALANCE_FORK \
161 | 0*SD_BALANCE_WAKE \
162 | 1*SD_WAKE_AFFINE \
163 | 0*SD_PREFER_LOCAL \
164 | 0*SD_SHARE_CPUPOWER \
165 | 0*SD_SHARE_PKG_RESOURCES \
166 | 0*SD_SERIALIZE \
167 , \
168 .last_balance = jiffies, \
169 .balance_interval = 1, \
170 }
171 #endif
172
173 #ifdef CONFIG_SCHED_BOOK
174 #ifndef SD_BOOK_INIT
175 #error Please define an appropriate SD_BOOK_INIT in include/asm/topology.h!!!
176 #endif
177 #endif /* CONFIG_SCHED_BOOK */
178
179 #ifdef CONFIG_USE_PERCPU_NUMA_NODE_ID
180 DECLARE_PER_CPU(int, numa_node);
181
182 #ifndef numa_node_id
183 /* Returns the number of the current Node. */
184 static inline int numa_node_id(void)
185 {
186 return __this_cpu_read(numa_node);
187 }
188 #endif
189
190 #ifndef cpu_to_node
191 static inline int cpu_to_node(int cpu)
192 {
193 return per_cpu(numa_node, cpu);
194 }
195 #endif
196
197 #ifndef set_numa_node
198 static inline void set_numa_node(int node)
199 {
200 this_cpu_write(numa_node, node);
201 }
202 #endif
203
204 #ifndef set_cpu_numa_node
205 static inline void set_cpu_numa_node(int cpu, int node)
206 {
207 per_cpu(numa_node, cpu) = node;
208 }
209 #endif
210
211 #else /* !CONFIG_USE_PERCPU_NUMA_NODE_ID */
212
213 /* Returns the number of the current Node. */
214 #ifndef numa_node_id
215 static inline int numa_node_id(void)
216 {
217 return cpu_to_node(raw_smp_processor_id());
218 }
219 #endif
220
221 #endif /* [!]CONFIG_USE_PERCPU_NUMA_NODE_ID */
222
223 #ifdef CONFIG_HAVE_MEMORYLESS_NODES
224
225 /*
226 * N.B., Do NOT reference the '_numa_mem_' per cpu variable directly.
227 * It will not be defined when CONFIG_HAVE_MEMORYLESS_NODES is not defined.
228 * Use the accessor functions set_numa_mem(), numa_mem_id() and cpu_to_mem().
229 */
230 DECLARE_PER_CPU(int, _numa_mem_);
231
232 #ifndef set_numa_mem
233 static inline void set_numa_mem(int node)
234 {
235 this_cpu_write(_numa_mem_, node);
236 }
237 #endif
238
239 #ifndef numa_mem_id
240 /* Returns the number of the nearest Node with memory */
241 static inline int numa_mem_id(void)
242 {
243 return __this_cpu_read(_numa_mem_);
244 }
245 #endif
246
247 #ifndef cpu_to_mem
248 static inline int cpu_to_mem(int cpu)
249 {
250 return per_cpu(_numa_mem_, cpu);
251 }
252 #endif
253
254 #ifndef set_cpu_numa_mem
255 static inline void set_cpu_numa_mem(int cpu, int node)
256 {
257 per_cpu(_numa_mem_, cpu) = node;
258 }
259 #endif
260
261 #else /* !CONFIG_HAVE_MEMORYLESS_NODES */
262
263 #ifndef numa_mem_id
264 /* Returns the number of the nearest Node with memory */
265 static inline int numa_mem_id(void)
266 {
267 return numa_node_id();
268 }
269 #endif
270
271 #ifndef cpu_to_mem
272 static inline int cpu_to_mem(int cpu)
273 {
274 return cpu_to_node(cpu);
275 }
276 #endif
277
278 #endif /* [!]CONFIG_HAVE_MEMORYLESS_NODES */
279
280 #ifndef topology_physical_package_id
281 #define topology_physical_package_id(cpu) ((void)(cpu), -1)
282 #endif
283 #ifndef topology_core_id
284 #define topology_core_id(cpu) ((void)(cpu), 0)
285 #endif
286 #ifndef topology_thread_cpumask
287 #define topology_thread_cpumask(cpu) cpumask_of(cpu)
288 #endif
289 #ifndef topology_core_cpumask
290 #define topology_core_cpumask(cpu) cpumask_of(cpu)
291 #endif
292
293 #endif /* _LINUX_TOPOLOGY_H */