1 /* SPDX-License-Identifier: GPL-2.0-only */
3 * SAS host prototypes and structures header file
5 * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
6 * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
13 #include <linux/timer.h>
14 #include <linux/pci.h>
16 #include <linux/libata.h>
17 #include <linux/list.h>
18 #include <scsi/scsi_device.h>
19 #include <scsi/scsi_cmnd.h>
20 #include <scsi/scsi_transport_sas.h>
21 #include <linux/scatterlist.h>
22 #include <linux/slab.h>
33 PHY_ROLE_TARGET
= 0x40,
34 PHY_ROLE_INITIATOR
= 0x80,
42 /* The events are mnemonically described in sas_dump.c
43 * so when updating/adding events here, please also
44 * update the other file too.
47 PORTE_BYTES_DMAED
= 0U,
56 PHYE_LOSS_OF_SIGNAL
= 0U,
59 PHYE_SPINUP_HOLD
, /* hot plug SATA, no COMWAKE sent */
66 DISCE_DISCOVER_DOMAIN
= 0U,
67 DISCE_REVALIDATE_DOMAIN
,
73 /* ---------- Expander Devices ---------- */
75 #define to_dom_device(_obj) container_of(_obj, struct domain_device, dev_obj)
76 #define to_dev_attr(_attr) container_of(_attr, struct domain_dev_attribute,\
79 enum routing_attribute
{
95 enum ex_phy_state phy_state
;
97 enum sas_device_type attached_dev_type
;
98 enum sas_linkrate linkrate
;
100 u8 attached_sata_host
:1;
101 u8 attached_sata_dev
:1;
102 u8 attached_sata_ps
:1;
104 enum sas_protocol attached_tproto
;
105 enum sas_protocol attached_iproto
;
107 u8 attached_sas_addr
[SAS_ADDR_SIZE
];
110 int phy_change_count
;
111 enum routing_attribute routing_attr
;
117 struct sas_port
*port
;
120 struct expander_device
{
121 struct list_head children
;
124 u16 max_route_indexes
;
129 u8 conf_route_table
:1;
131 u8 enclosure_logical_id
[8];
133 struct ex_phy
*ex_phy
;
134 struct sas_port
*parent_port
;
136 struct mutex cmd_mutex
;
139 /* ---------- SATA device ---------- */
140 #define ATA_RESP_FIS_SIZE 24
144 u8 port_no
; /* port number, if this is a PM (Port) */
147 struct ata_host
*ata_host
;
148 struct smp_resp rps_resp ____cacheline_aligned
; /* report_phy_sata_resp */
149 u8 fis
[ATA_RESP_FIS_SIZE
];
153 struct list_head eh_list_node
; /* pending a user requested eh action */
154 struct scsi_lun reset_lun
;
159 SAS_DEV_FOUND
, /* device notified to lldd */
166 struct domain_device
{
167 spinlock_t done_lock
;
168 enum sas_device_type dev_type
;
170 enum sas_linkrate linkrate
;
171 enum sas_linkrate min_linkrate
;
172 enum sas_linkrate max_linkrate
;
176 struct domain_device
*parent
;
177 struct list_head siblings
; /* devices on the same level */
178 struct asd_sas_port
*port
; /* shortcut to root of the tree */
181 struct list_head dev_list_node
;
182 struct list_head disco_list_node
; /* awaiting probe or destruct */
184 enum sas_protocol iproto
;
185 enum sas_protocol tproto
;
187 struct sas_rphy
*rphy
;
189 u8 sas_addr
[SAS_ADDR_SIZE
];
190 u8 hashed_sas_addr
[HASHED_SAS_ADDR_SIZE
];
195 struct expander_device ex_dev
;
196 struct sata_device sata_dev
; /* STP & directly attached */
197 struct ssp_device ssp_dev
;
206 struct list_head drain_node
;
207 struct work_struct work
;
210 static inline bool dev_is_expander(enum sas_device_type type
)
212 return type
== SAS_EDGE_EXPANDER_DEVICE
||
213 type
== SAS_FANOUT_EXPANDER_DEVICE
;
216 static inline void INIT_SAS_WORK(struct sas_work
*sw
, void (*fn
)(struct work_struct
*))
218 INIT_WORK(&sw
->work
, fn
);
219 INIT_LIST_HEAD(&sw
->drain_node
);
222 struct sas_discovery_event
{
223 struct sas_work work
;
224 struct asd_sas_port
*port
;
227 static inline struct sas_discovery_event
*to_sas_discovery_event(struct work_struct
*work
)
229 struct sas_discovery_event
*ev
= container_of(work
, typeof(*ev
), work
.work
);
234 struct sas_discovery
{
235 struct sas_discovery_event disc_work
[DISC_NUM_EVENTS
];
236 unsigned long pending
;
237 u8 fanout_sas_addr
[SAS_ADDR_SIZE
];
238 u8 eeds_a
[SAS_ADDR_SIZE
];
239 u8 eeds_b
[SAS_ADDR_SIZE
];
243 /* The port struct is Class:RW, driver:RO */
244 struct asd_sas_port
{
246 struct sas_discovery disc
;
247 struct domain_device
*port_dev
;
248 spinlock_t dev_list_lock
;
249 struct list_head dev_list
;
250 struct list_head disco_list
;
251 struct list_head destroy_list
;
252 struct list_head sas_port_del_list
;
253 enum sas_linkrate linkrate
;
255 struct sas_work work
;
261 enum sas_class
class;
262 u8 sas_addr
[SAS_ADDR_SIZE
];
263 u8 attached_sas_addr
[SAS_ADDR_SIZE
];
264 enum sas_protocol iproto
;
265 enum sas_protocol tproto
;
267 enum sas_oob_mode oob_mode
;
269 spinlock_t phy_list_lock
;
270 struct list_head phy_list
;
274 struct sas_ha_struct
*ha
;
276 struct sas_port
*port
;
278 void *lldd_port
; /* not touched by the sas class code */
281 struct asd_sas_event
{
282 struct sas_work work
;
283 struct asd_sas_phy
*phy
;
287 static inline struct asd_sas_event
*to_asd_sas_event(struct work_struct
*work
)
289 struct asd_sas_event
*ev
= container_of(work
, typeof(*ev
), work
.work
);
294 static inline void INIT_SAS_EVENT(struct asd_sas_event
*ev
,
295 void (*fn
)(struct work_struct
*),
296 struct asd_sas_phy
*phy
, int event
)
298 INIT_SAS_WORK(&ev
->work
, fn
);
303 #define SAS_PHY_SHUTDOWN_THRES 1024
305 /* The phy pretty much is controlled by the LLDD.
306 * The class only reads those fields.
318 /* The following are class:RO, driver:R/W */
319 int enabled
; /* must be set */
321 int id
; /* must be set */
322 enum sas_class
class;
323 enum sas_protocol iproto
;
324 enum sas_protocol tproto
;
326 enum sas_phy_type type
;
327 enum sas_phy_role role
;
328 enum sas_oob_mode oob_mode
;
329 enum sas_linkrate linkrate
;
331 u8
*sas_addr
; /* must be set */
332 u8 attached_sas_addr
[SAS_ADDR_SIZE
]; /* class:RO, driver: R/W */
334 spinlock_t frame_rcvd_lock
;
335 u8
*frame_rcvd
; /* must be set */
338 spinlock_t sas_prim_lock
;
341 struct list_head port_phy_el
; /* driver:RO */
342 struct asd_sas_port
*port
; /* Class:RW, driver: RO */
344 struct sas_ha_struct
*ha
; /* may be set; the class sets it anyway */
346 void *lldd_phy
; /* not touched by the sas_class_code */
350 struct Scsi_Host
*shost
;
357 SAS_HA_ATA_EH_ACTIVE
,
361 struct sas_ha_struct
{
363 struct list_head defer_q
; /* work queued while draining */
364 struct mutex drain_mutex
;
368 wait_queue_head_t eh_wait_q
;
369 struct list_head eh_dev_q
;
371 struct mutex disco_mutex
;
373 struct scsi_core core
;
377 struct device
*dev
; /* should be set */
378 struct module
*lldd_module
; /* should be set */
380 struct workqueue_struct
*event_q
;
381 struct workqueue_struct
*disco_q
;
383 u8
*sas_addr
; /* must be set */
384 u8 hashed_sas_addr
[HASHED_SAS_ADDR_SIZE
];
386 spinlock_t phy_port_lock
;
387 struct asd_sas_phy
**sas_phy
; /* array of valid pointers, must be set */
388 struct asd_sas_port
**sas_port
; /* array of valid pointers, must be set */
389 int num_phys
; /* must be set, gt 0, static */
391 int strict_wide_ports
; /* both sas_addr and attached_sas_addr must match
392 * their siblings when forming wide ports */
394 void *lldd_ha
; /* not touched by sas class code */
396 struct list_head eh_done_q
; /* complete via scsi_eh_flush_done_q */
397 struct list_head eh_ata_q
; /* scmds to promote from sas to ata eh */
402 #define SHOST_TO_SAS_HA(_shost) (*(struct sas_ha_struct **)(_shost)->hostdata)
404 static inline struct domain_device
*
405 starget_to_domain_dev(struct scsi_target
*starget
) {
406 return starget
->hostdata
;
409 static inline struct domain_device
*
410 sdev_to_domain_dev(struct scsi_device
*sdev
) {
411 return starget_to_domain_dev(sdev
->sdev_target
);
414 static inline struct ata_device
*sas_to_ata_dev(struct domain_device
*dev
)
416 return &dev
->sata_dev
.ap
->link
.device
[0];
419 static inline struct domain_device
*
420 cmd_to_domain_dev(struct scsi_cmnd
*cmd
)
422 return sdev_to_domain_dev(cmd
->device
);
425 void sas_hash_addr(u8
*hashed
, const u8
*sas_addr
);
427 /* Before calling a notify event, LLDD should use this function
428 * when the link is severed (possibly from its tasklet).
429 * The idea is that the Class only reads those, while the LLDD,
430 * can R/W these (thus avoiding a race).
432 static inline void sas_phy_disconnected(struct asd_sas_phy
*phy
)
434 phy
->oob_mode
= OOB_NOT_CONNECTED
;
435 phy
->linkrate
= SAS_LINK_RATE_UNKNOWN
;
438 static inline unsigned int to_sas_gpio_od(int device
, int bit
)
440 return 3 * device
+ bit
;
443 static inline void sas_put_local_phy(struct sas_phy
*phy
)
445 put_device(&phy
->dev
);
448 #ifdef CONFIG_SCSI_SAS_HOST_SMP
449 int try_test_sas_gpio_gp_bit(unsigned int od
, u8
*data
, u8 index
, u8 count
);
451 static inline int try_test_sas_gpio_gp_bit(unsigned int od
, u8
*data
, u8 index
, u8 count
)
457 /* ---------- Tasks ---------- */
459 service_response | SAS_TASK_COMPLETE | SAS_TASK_UNDELIVERED |
461 ---------------------+---------------------+-----------------------+
463 DEV_NO_RESPONSE | X | X |
466 DEVICE_UNKNOWN | | X |
468 ---------------------+---------------------+-----------------------+
471 enum service_response
{
473 SAS_TASK_UNDELIVERED
= -1,
478 * Values 0..0x7f are used to return the SAM_STAT_* codes. To avoid
479 * 'case value not in enumerated type' compiler warnings every value
480 * returned through the exec_status enum needs an alias with the SAS_
483 SAS_SAM_STAT_GOOD
= SAM_STAT_GOOD
,
484 SAS_SAM_STAT_BUSY
= SAM_STAT_BUSY
,
485 SAS_SAM_STAT_TASK_ABORTED
= SAM_STAT_TASK_ABORTED
,
486 SAS_SAM_STAT_CHECK_CONDITION
= SAM_STAT_CHECK_CONDITION
,
488 SAS_DEV_NO_RESPONSE
= 0x80,
504 /* When a task finishes with a response, the LLDD examines the
506 * - For an ATA task task_status_struct::stat is set to
507 * SAS_PROTO_RESPONSE, and the task_status_struct::buf is set to the
508 * contents of struct ata_task_resp.
509 * - For SSP tasks, if no data is present or status/TMF response
510 * is valid, task_status_struct::stat is set. If data is present
511 * (SENSE data), the LLDD copies up to SAS_STATUS_BUF_SIZE, sets
512 * task_status_struct::buf_valid_size, and task_status_struct::stat is
513 * set to SAM_CHECK_COND.
515 * "buf" has format SCSI Sense for SSP task, or struct ata_task_resp
518 * "frame_len" is the total frame length, which could be more or less
519 * than actually copied.
521 * Tasks ending with response, always set the residual field.
523 struct ata_task_resp
{
525 u8 ending_fis
[ATA_RESP_FIS_SIZE
]; /* dev to host or data-in */
528 #define SAS_STATUS_BUF_SIZE 96
530 struct task_status_struct
{
531 enum service_response resp
;
532 enum exec_status stat
;
535 u8 buf
[SAS_STATUS_BUF_SIZE
];
538 enum sas_open_rej_reason open_rej_reason
;
541 /* ATA and ATAPI task queuable to a SAS LLDD.
543 struct sas_ata_task
{
544 struct host_to_dev_fis fis
;
545 u8 atapi_packet
[16]; /* 0 if not ATAPI task */
547 u8 retry_count
; /* hardware retry, should be > 0 */
549 u8 dma_xfer
:1; /* PIO:0 or DMA:1 */
554 u8 device_control_reg_update
:1;
557 struct sas_smp_task
{
558 struct scatterlist smp_req
;
559 struct scatterlist smp_resp
;
562 enum task_attribute
{
563 TASK_ATTR_SIMPLE
= 0,
565 TASK_ATTR_ORDERED
= 2,
569 struct sas_ssp_task
{
570 u8 retry_count
; /* hardware retry, should be > 0 */
573 u8 enable_first_burst
:1;
574 enum task_attribute task_attr
;
576 struct scsi_cmnd
*cmd
;
580 struct domain_device
*dev
;
582 spinlock_t task_state_lock
;
583 unsigned task_state_flags
;
585 enum sas_protocol task_proto
;
588 struct sas_ata_task ata_task
;
589 struct sas_smp_task smp_task
;
590 struct sas_ssp_task ssp_task
;
593 struct scatterlist
*scatter
;
596 u8 data_dir
:2; /* Use PCI_DMA_... */
598 struct task_status_struct task_status
;
599 void (*task_done
)(struct sas_task
*);
601 void *lldd_task
; /* for use by LLDDs */
603 struct sas_task_slow
*slow_task
;
606 struct sas_task_slow
{
607 /* standard/extra infrastructure for slow path commands (SMP and
608 * internal lldd commands
610 struct timer_list timer
;
611 struct completion completion
;
612 struct sas_task
*task
;
615 #define SAS_TASK_STATE_PENDING 1
616 #define SAS_TASK_STATE_DONE 2
617 #define SAS_TASK_STATE_ABORTED 4
618 #define SAS_TASK_NEED_DEV_RESET 8
619 #define SAS_TASK_AT_INITIATOR 16
621 extern struct sas_task
*sas_alloc_task(gfp_t flags
);
622 extern struct sas_task
*sas_alloc_slow_task(gfp_t flags
);
623 extern void sas_free_task(struct sas_task
*task
);
625 struct sas_domain_function_template
{
626 /* The class calls these to notify the LLDD of an event. */
627 void (*lldd_port_formed
)(struct asd_sas_phy
*);
628 void (*lldd_port_deformed
)(struct asd_sas_phy
*);
630 /* The class calls these when a device is found or gone. */
631 int (*lldd_dev_found
)(struct domain_device
*);
632 void (*lldd_dev_gone
)(struct domain_device
*);
634 int (*lldd_execute_task
)(struct sas_task
*, gfp_t gfp_flags
);
636 /* Task Management Functions. Must be called from process context. */
637 int (*lldd_abort_task
)(struct sas_task
*);
638 int (*lldd_abort_task_set
)(struct domain_device
*, u8
*lun
);
639 int (*lldd_clear_aca
)(struct domain_device
*, u8
*lun
);
640 int (*lldd_clear_task_set
)(struct domain_device
*, u8
*lun
);
641 int (*lldd_I_T_nexus_reset
)(struct domain_device
*);
642 int (*lldd_ata_check_ready
)(struct domain_device
*);
643 void (*lldd_ata_set_dmamode
)(struct domain_device
*);
644 int (*lldd_lu_reset
)(struct domain_device
*, u8
*lun
);
645 int (*lldd_query_task
)(struct sas_task
*);
647 /* Port and Adapter management */
648 int (*lldd_clear_nexus_port
)(struct asd_sas_port
*);
649 int (*lldd_clear_nexus_ha
)(struct sas_ha_struct
*);
652 int (*lldd_control_phy
)(struct asd_sas_phy
*, enum phy_func
, void *);
655 int (*lldd_write_gpio
)(struct sas_ha_struct
*, u8 reg_type
,
656 u8 reg_index
, u8 reg_count
, u8
*write_data
);
659 extern int sas_register_ha(struct sas_ha_struct
*);
660 extern int sas_unregister_ha(struct sas_ha_struct
*);
661 extern void sas_prep_resume_ha(struct sas_ha_struct
*sas_ha
);
662 extern void sas_resume_ha(struct sas_ha_struct
*sas_ha
);
663 extern void sas_suspend_ha(struct sas_ha_struct
*sas_ha
);
665 int sas_set_phy_speed(struct sas_phy
*phy
, struct sas_phy_linkrates
*rates
);
666 int sas_phy_reset(struct sas_phy
*phy
, int hard_reset
);
667 extern int sas_queuecommand(struct Scsi_Host
*, struct scsi_cmnd
*);
668 extern int sas_target_alloc(struct scsi_target
*);
669 extern int sas_slave_configure(struct scsi_device
*);
670 extern int sas_change_queue_depth(struct scsi_device
*, int new_depth
);
671 extern int sas_bios_param(struct scsi_device
*, struct block_device
*,
672 sector_t capacity
, int *hsc
);
673 extern struct scsi_transport_template
*
674 sas_domain_attach_transport(struct sas_domain_function_template
*);
675 extern struct device_attribute dev_attr_phy_event_threshold
;
677 int sas_discover_root_expander(struct domain_device
*);
679 void sas_init_ex_attr(void);
681 int sas_ex_revalidate_domain(struct domain_device
*);
683 void sas_unregister_domain_devices(struct asd_sas_port
*port
, int gone
);
684 void sas_init_disc(struct sas_discovery
*disc
, struct asd_sas_port
*);
685 int sas_discover_event(struct asd_sas_port
*, enum discover_event ev
);
687 int sas_discover_sata(struct domain_device
*);
688 int sas_discover_end_dev(struct domain_device
*);
690 void sas_unregister_dev(struct asd_sas_port
*port
, struct domain_device
*);
692 void sas_init_dev(struct domain_device
*);
694 void sas_task_abort(struct sas_task
*);
695 int sas_eh_abort_handler(struct scsi_cmnd
*cmd
);
696 int sas_eh_device_reset_handler(struct scsi_cmnd
*cmd
);
697 int sas_eh_target_reset_handler(struct scsi_cmnd
*cmd
);
699 extern void sas_target_destroy(struct scsi_target
*);
700 extern int sas_slave_alloc(struct scsi_device
*);
701 extern int sas_ioctl(struct scsi_device
*sdev
, unsigned int cmd
,
703 extern int sas_drain_work(struct sas_ha_struct
*ha
);
705 extern void sas_ssp_task_response(struct device
*dev
, struct sas_task
*task
,
706 struct ssp_response_iu
*iu
);
707 struct sas_phy
*sas_get_local_phy(struct domain_device
*dev
);
709 int sas_request_addr(struct Scsi_Host
*shost
, u8
*addr
);
711 int sas_notify_port_event(struct asd_sas_phy
*phy
, enum port_event event
,
713 int sas_notify_phy_event(struct asd_sas_phy
*phy
, enum phy_event event
,
716 #endif /* _SASLIB_H_ */