include/scsi/scsi_transport_sas.h

   1 #ifndef SCSI_TRANSPORT_SAS_H
   2 #define SCSI_TRANSPORT_SAS_H
   3
   4 #include <linux/transport_class.h>
   5 #include <linux/types.h>
   6 #include <linux/mutex.h>
   7 #include <scsi/sas.h>
   8
   9 struct scsi_transport_template;
  10 struct sas_rphy;
  11 struct request;
  12
  13 enum sas_device_type {
  14         SAS_PHY_UNUSED = 0,
  15         SAS_END_DEVICE = 1,
  16         SAS_EDGE_EXPANDER_DEVICE = 2,
  17         SAS_FANOUT_EXPANDER_DEVICE = 3,
  18 };
  19
  20 static inline int sas_protocol_ata(enum sas_protocol proto)
  21 {
  22         return ((proto & SAS_PROTOCOL_SATA) ||
  23                 (proto & SAS_PROTOCOL_STP))? 1 : 0;
  24 }
  25
  26 enum sas_linkrate {
  27         /* These Values are defined in the SAS standard */
  28         SAS_LINK_RATE_UNKNOWN = 0,
  29         SAS_PHY_DISABLED = 1,
  30         SAS_PHY_RESET_PROBLEM = 2,
  31         SAS_SATA_SPINUP_HOLD = 3,
  32         SAS_SATA_PORT_SELECTOR = 4,
  33         SAS_PHY_RESET_IN_PROGRESS = 5,
  34         SAS_LINK_RATE_1_5_GBPS = 8,
  35         SAS_LINK_RATE_G1 = SAS_LINK_RATE_1_5_GBPS,
  36         SAS_LINK_RATE_3_0_GBPS = 9,
  37         SAS_LINK_RATE_G2 = SAS_LINK_RATE_3_0_GBPS,
  38         SAS_LINK_RATE_6_0_GBPS = 10,
  39         SAS_LINK_RATE_12_0_GBPS = 11,
  40         /* These are virtual to the transport class and may never
  41          * be signalled normally since the standard defined field
  42          * is only 4 bits */
  43         SAS_LINK_RATE_FAILED = 0x10,
  44         SAS_PHY_VIRTUAL = 0x11,
  45 };
  46
  47 struct sas_identify {
  48         enum sas_device_type    device_type;
  49         enum sas_protocol       initiator_port_protocols;
  50         enum sas_protocol       target_port_protocols;
  51         u64                     sas_address;
  52         u8                      phy_identifier;
  53 };
  54
  55 struct sas_phy {
  56         struct device           dev;
  57         int                     number;
  58         int                     enabled;
  59
  60         /* phy identification */
  61         struct sas_identify     identify;
  62
  63         /* phy attributes */
  64         enum sas_linkrate       negotiated_linkrate;
  65         enum sas_linkrate       minimum_linkrate_hw;
  66         enum sas_linkrate       minimum_linkrate;
  67         enum sas_linkrate       maximum_linkrate_hw;
  68         enum sas_linkrate       maximum_linkrate;
  69
  70         /* link error statistics */
  71         u32                     invalid_dword_count;
  72         u32                     running_disparity_error_count;
  73         u32                     loss_of_dword_sync_count;
  74         u32                     phy_reset_problem_count;
  75
  76         /* for the list of phys belonging to a port */
  77         struct list_head        port_siblings;
  78
  79         /* available to the lldd */
  80         void                    *hostdata;
  81 };
  82
  83 #define dev_to_phy(d) \
  84         container_of((d), struct sas_phy, dev)
  85 #define transport_class_to_phy(dev) \
  86         dev_to_phy((dev)->parent)
  87 #define phy_to_shost(phy) \
  88         dev_to_shost((phy)->dev.parent)
  89
  90 struct request_queue;
  91 struct sas_rphy {
  92         struct device           dev;
  93         struct sas_identify     identify;
  94         struct list_head        list;
  95         struct request_queue    *q;
  96         u32                     scsi_target_id;
  97 };
  98
  99 #define dev_to_rphy(d) \
 100         container_of((d), struct sas_rphy, dev)
 101 #define transport_class_to_rphy(dev) \
 102         dev_to_rphy((dev)->parent)
 103 #define rphy_to_shost(rphy) \
 104         dev_to_shost((rphy)->dev.parent)
 105 #define target_to_rphy(targ) \
 106         dev_to_rphy((targ)->dev.parent)
 107
 108 struct sas_end_device {
 109         struct sas_rphy         rphy;
 110         /* flags */
 111         unsigned                ready_led_meaning:1;
 112         unsigned                tlr_supported:1;
 113         unsigned                tlr_enabled:1;
 114         /* parameters */
 115         u16                     I_T_nexus_loss_timeout;
 116         u16                     initiator_response_timeout;
 117 };
 118 #define rphy_to_end_device(r) \
 119         container_of((r), struct sas_end_device, rphy)
 120
 121 struct sas_expander_device {
 122         int    level;
 123         int    next_port_id;
 124
 125         #define SAS_EXPANDER_VENDOR_ID_LEN      8
 126         char   vendor_id[SAS_EXPANDER_VENDOR_ID_LEN+1];
 127         #define SAS_EXPANDER_PRODUCT_ID_LEN     16
 128         char   product_id[SAS_EXPANDER_PRODUCT_ID_LEN+1];
 129         #define SAS_EXPANDER_PRODUCT_REV_LEN    4
 130         char   product_rev[SAS_EXPANDER_PRODUCT_REV_LEN+1];
 131         #define SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN    8
 132         char   component_vendor_id[SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN+1];
 133         u16    component_id;
 134         u8     component_revision_id;
 135
 136         struct sas_rphy         rphy;
 137
 138 };
 139 #define rphy_to_expander_device(r) \
 140         container_of((r), struct sas_expander_device, rphy)
 141
 142 struct sas_port {
 143         struct device           dev;
 144
 145         int                     port_identifier;
 146         int                     num_phys;
 147         /* port flags */
 148         unsigned int            is_backlink:1;
 149
 150         /* the other end of the link */
 151         struct sas_rphy         *rphy;
 152
 153         struct mutex            phy_list_mutex;
 154         struct list_head        phy_list;
 155 };
 156
 157 #define dev_to_sas_port(d) \
 158         container_of((d), struct sas_port, dev)
 159 #define transport_class_to_sas_port(dev) \
 160         dev_to_sas_port((dev)->parent)
 161
 162 struct sas_phy_linkrates {
 163         enum sas_linkrate maximum_linkrate;
 164         enum sas_linkrate minimum_linkrate;
 165 };
 166
 167 /* The functions by which the transport class and the driver communicate */
 168 struct sas_function_template {
 169         int (*get_linkerrors)(struct sas_phy *);
 170         int (*get_enclosure_identifier)(struct sas_rphy *, u64 *);
 171         int (*get_bay_identifier)(struct sas_rphy *);
 172         int (*phy_reset)(struct sas_phy *, int);
 173         int (*phy_enable)(struct sas_phy *, int);
 174         int (*phy_setup)(struct sas_phy *);
 175         void (*phy_release)(struct sas_phy *);
 176         int (*set_phy_speed)(struct sas_phy *, struct sas_phy_linkrates *);
 177         int (*smp_handler)(struct Scsi_Host *, struct sas_rphy *, struct request *);
 178 };
 179
 180
 181 void sas_remove_children(struct device *);
 182 extern void sas_remove_host(struct Scsi_Host *);
 183
 184 extern struct sas_phy *sas_phy_alloc(struct device *, int);
 185 extern void sas_phy_free(struct sas_phy *);
 186 extern int sas_phy_add(struct sas_phy *);
 187 extern void sas_phy_delete(struct sas_phy *);
 188 extern int scsi_is_sas_phy(const struct device *);
 189
 190 unsigned int sas_tlr_supported(struct scsi_device *);
 191 unsigned int sas_is_tlr_enabled(struct scsi_device *);
 192 void sas_disable_tlr(struct scsi_device *);
 193 void sas_enable_tlr(struct scsi_device *);
 194
 195 extern struct sas_rphy *sas_end_device_alloc(struct sas_port *);
 196 extern struct sas_rphy *sas_expander_alloc(struct sas_port *, enum sas_device_type);
 197 void sas_rphy_free(struct sas_rphy *);
 198 extern int sas_rphy_add(struct sas_rphy *);
 199 extern void sas_rphy_remove(struct sas_rphy *);
 200 extern void sas_rphy_delete(struct sas_rphy *);
 201 extern void sas_rphy_unlink(struct sas_rphy *);
 202 extern int scsi_is_sas_rphy(const struct device *);
 203
 204 struct sas_port *sas_port_alloc(struct device *, int);
 205 struct sas_port *sas_port_alloc_num(struct device *);
 206 int sas_port_add(struct sas_port *);
 207 void sas_port_free(struct sas_port *);
 208 void sas_port_delete(struct sas_port *);
 209 void sas_port_add_phy(struct sas_port *, struct sas_phy *);
 210 void sas_port_delete_phy(struct sas_port *, struct sas_phy *);
 211 void sas_port_mark_backlink(struct sas_port *);
 212 int scsi_is_sas_port(const struct device *);
 213 struct sas_phy *sas_port_get_phy(struct sas_port *port);
 214 static inline void sas_port_put_phy(struct sas_phy *phy)
 215 {
 216         if (phy)
 217                 put_device(&phy->dev);
 218 }
 219
 220 extern struct scsi_transport_template *
 221 sas_attach_transport(struct sas_function_template *);
 222 extern void sas_release_transport(struct scsi_transport_template *);
 223 int sas_read_port_mode_page(struct scsi_device *);
 224
 225 static inline int
 226 scsi_is_sas_expander_device(struct device *dev)
 227 {
 228         struct sas_rphy *rphy;
 229         if (!scsi_is_sas_rphy(dev))
 230                 return 0;
 231         rphy = dev_to_rphy(dev);
 232         return rphy->identify.device_type == SAS_FANOUT_EXPANDER_DEVICE ||
 233                 rphy->identify.device_type == SAS_EDGE_EXPANDER_DEVICE;
 234 }
 235
 236 #define scsi_is_sas_phy_local(phy)      scsi_is_host_device((phy)->dev.parent)
 237
 238 #endif /* SCSI_TRANSPORT_SAS_H */