include/uapi/linux/fd.h

   1 /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
   2 #ifndef _UAPI_LINUX_FD_H
   3 #define _UAPI_LINUX_FD_H
   4
   5 #include <linux/ioctl.h>
   6 #include <linux/compiler.h>
   7
   8 /* New file layout: Now the ioctl definitions immediately follow the
   9  * definitions of the structures that they use */
  10
  11 /*
  12  * Geometry
  13  */
  14 struct floppy_struct {
  15         unsigned int    size,           /* nr of sectors total */
  16                         sect,           /* sectors per track */
  17                         head,           /* nr of heads */
  18                         track,          /* nr of tracks */
  19                         stretch;        /* bit 0 !=0 means double track steps */
  20                                         /* bit 1 != 0 means swap sides */
  21                                         /* bits 2..9 give the first sector */
  22                                         /*  number (the LSB is flipped) */
  23 #define FD_STRETCH 1
  24 #define FD_SWAPSIDES 2
  25 #define FD_ZEROBASED 4
  26 #define FD_SECTBASEMASK 0x3FC
  27 #define FD_MKSECTBASE(s) (((s) ^ 1) << 2)
  28 #define FD_SECTBASE(floppy) ((((floppy)->stretch & FD_SECTBASEMASK) >> 2) ^ 1)
  29
  30         unsigned char   gap,            /* gap1 size */
  31
  32                         rate,           /* data rate. |= 0x40 for perpendicular */
  33 #define FD_2M 0x4
  34 #define FD_SIZECODEMASK 0x38
  35 #define FD_SIZECODE(floppy) (((((floppy)->rate&FD_SIZECODEMASK)>> 3)+ 2) %8)
  36 #define FD_SECTSIZE(floppy) ( (floppy)->rate & FD_2M ? \
  37                              512 : 128 << FD_SIZECODE(floppy) )
  38 #define FD_PERP 0x40
  39
  40                         spec1,          /* stepping rate, head unload time */
  41                         fmt_gap;        /* gap2 size */
  42         const char      * name; /* used only for predefined formats */
  43 };
  44
  45
  46 /* commands needing write access have 0x40 set */
  47 /* commands needing super user access have 0x80 set */
  48
  49 #define FDCLRPRM _IO(2, 0x41)
  50 /* clear user-defined parameters */
  51
  52 #define FDSETPRM _IOW(2, 0x42, struct floppy_struct)
  53 #define FDSETMEDIAPRM FDSETPRM
  54 /* set user-defined parameters for current media */
  55
  56 #define FDDEFPRM _IOW(2, 0x43, struct floppy_struct)
  57 #define FDGETPRM _IOR(2, 0x04, struct floppy_struct)
  58 #define FDDEFMEDIAPRM FDDEFPRM
  59 #define FDGETMEDIAPRM FDGETPRM
  60 /* set/get disk parameters */
  61
  62
  63 #define FDMSGON  _IO(2,0x45)
  64 #define FDMSGOFF _IO(2,0x46)
  65 /* issue/don't issue kernel messages on media type change */
  66
  67
  68 /*
  69  * Formatting (obsolete)
  70  */
  71 #define FD_FILL_BYTE 0xF6 /* format fill byte. */
  72
  73 struct format_descr {
  74         unsigned int device,head,track;
  75 };
  76
  77 #define FDFMTBEG _IO(2,0x47)
  78 /* begin formatting a disk */
  79 #define FDFMTTRK _IOW(2,0x48, struct format_descr)
  80 /* format the specified track */
  81 #define FDFMTEND _IO(2,0x49)
  82 /* end formatting a disk */
  83
  84
  85 /*
  86  * Error thresholds
  87  */
  88 struct floppy_max_errors {
  89         unsigned int
  90           abort,      /* number of errors to be reached before aborting */
  91           read_track, /* maximal number of errors permitted to read an
  92                        * entire track at once */
  93           reset,      /* maximal number of errors before a reset is tried */
  94           recal,      /* maximal number of errors before a recalibrate is
  95                        * tried */
  96
  97           /*
  98            * Threshold for reporting FDC errors to the console.
  99            * Setting this to zero may flood your screen when using
 100            * ultra cheap floppies ;-)
 101            */
 102           reporting;
 103
 104 };
 105
 106 #define FDSETEMSGTRESH  _IO(2,0x4a)
 107 /* set fdc error reporting threshold */
 108
 109 #define FDFLUSH  _IO(2,0x4b)
 110 /* flush buffers for media; either for verifying media, or for
 111  * handling a media change without closing the file descriptor */
 112
 113 #define FDSETMAXERRS _IOW(2, 0x4c, struct floppy_max_errors)
 114 #define FDGETMAXERRS _IOR(2, 0x0e, struct floppy_max_errors)
 115 /* set/get abortion and read_track threshold. See also floppy_drive_params
 116  * structure */
 117
 118
 119 typedef char floppy_drive_name[16];
 120 #define FDGETDRVTYP _IOR(2, 0x0f, floppy_drive_name)
 121 /* get drive type: 5 1/4 or 3 1/2 */
 122
 123
 124 /*
 125  * Drive parameters (user modifiable)
 126  */
 127 struct floppy_drive_params {
 128         signed char cmos;               /* CMOS type */
 129
 130         /* Spec2 is (HLD<<1 | ND), where HLD is head load time (1=2ms, 2=4 ms
 131          * etc) and ND is set means no DMA. Hardcoded to 6 (HLD=6ms, use DMA).
 132          */
 133         unsigned long max_dtr;          /* Step rate, usec */
 134         unsigned long hlt;              /* Head load/settle time, msec */
 135         unsigned long hut;              /* Head unload time (remnant of
 136                                          * 8" drives) */
 137         unsigned long srt;              /* Step rate, usec */
 138
 139         unsigned long spinup;           /* time needed for spinup (expressed
 140                                          * in jiffies) */
 141         unsigned long spindown;         /* timeout needed for spindown */
 142         unsigned char spindown_offset;  /* decides in which position the disk
 143                                          * will stop */
 144         unsigned char select_delay;     /* delay to wait after select */
 145         unsigned char rps;              /* rotations per second */
 146         unsigned char tracks;           /* maximum number of tracks */
 147         unsigned long timeout;          /* timeout for interrupt requests */
 148
 149         unsigned char interleave_sect;  /* if there are more sectors, use
 150                                          * interleave */
 151
 152         struct floppy_max_errors max_errors;
 153
 154         char flags;                     /* various flags, including ftd_msg */
 155 /*
 156  * Announce successful media type detection and media information loss after
 157  * disk changes.
 158  * Also used to enable/disable printing of overrun warnings.
 159  */
 160
 161 #define FTD_MSG 0x10
 162 #define FD_BROKEN_DCL 0x20
 163 #define FD_DEBUG 0x02
 164 #define FD_SILENT_DCL_CLEAR 0x4
 165 #define FD_INVERTED_DCL 0x80 /* must be 0x80, because of hardware
 166                                 considerations */
 167
 168         char read_track;                /* use readtrack during probing? */
 169
 170 /*
 171  * Auto-detection. Each drive type has eight formats which are
 172  * used in succession to try to read the disk. If the FDC cannot lock onto
 173  * the disk, the next format is tried. This uses the variable 'probing'.
 174  */
 175         short autodetect[8];            /* autodetected formats */
 176
 177         int checkfreq; /* how often should the drive be checked for disk
 178                         * changes */
 179         int native_format; /* native format of this drive */
 180 };
 181
 182 enum {
 183         FD_NEED_TWADDLE_BIT,    /* more magic */
 184         FD_VERIFY_BIT,          /* inquire for write protection */
 185         FD_DISK_NEWCHANGE_BIT,  /* change detected, and no action undertaken yet
 186                                  * to clear media change status */
 187         FD_UNUSED_BIT,
 188         FD_DISK_CHANGED_BIT,    /* disk has been changed since last i/o */
 189         FD_DISK_WRITABLE_BIT,   /* disk is writable */
 190         FD_OPEN_SHOULD_FAIL_BIT
 191 };
 192
 193 #define FDSETDRVPRM _IOW(2, 0x90, struct floppy_drive_params)
 194 #define FDGETDRVPRM _IOR(2, 0x11, struct floppy_drive_params)
 195 /* set/get drive parameters */
 196
 197
 198 /*
 199  * Current drive state (not directly modifiable by user, readonly)
 200  */
 201 struct floppy_drive_struct {
 202         unsigned long flags;
 203 /* values for these flags */
 204 #define FD_NEED_TWADDLE (1 << FD_NEED_TWADDLE_BIT)
 205 #define FD_VERIFY (1 << FD_VERIFY_BIT)
 206 #define FD_DISK_NEWCHANGE (1 << FD_DISK_NEWCHANGE_BIT)
 207 #define FD_DISK_CHANGED (1 << FD_DISK_CHANGED_BIT)
 208 #define FD_DISK_WRITABLE (1 << FD_DISK_WRITABLE_BIT)
 209
 210         unsigned long spinup_date;
 211         unsigned long select_date;
 212         unsigned long first_read_date;
 213         short probed_format;
 214         short track; /* current track */
 215         short maxblock; /* id of highest block read */
 216         short maxtrack; /* id of highest half track read */
 217         int generation; /* how many diskchanges? */
 218
 219 /*
 220  * (User-provided) media information is _not_ discarded after a media change
 221  * if the corresponding keep_data flag is non-zero. Positive values are
 222  * decremented after each probe.
 223  */
 224         int keep_data;
 225
 226         /* Prevent "aliased" accesses. */
 227         int fd_ref;
 228         int fd_device;
 229         unsigned long last_checked; /* when was the drive last checked for a disk
 230                            * change? */
 231
 232         char *dmabuf;
 233         int bufblocks;
 234 };
 235
 236 #define FDGETDRVSTAT _IOR(2, 0x12, struct floppy_drive_struct)
 237 #define FDPOLLDRVSTAT _IOR(2, 0x13, struct floppy_drive_struct)
 238 /* get drive state: GET returns the cached state, POLL polls for new state */
 239
 240
 241 /*
 242  * reset FDC
 243  */
 244 enum reset_mode {
 245         FD_RESET_IF_NEEDED,     /* reset only if the reset flags is set */
 246         FD_RESET_IF_RAWCMD,     /* obsolete */
 247         FD_RESET_ALWAYS         /* reset always */
 248 };
 249 #define FDRESET _IO(2, 0x54)
 250
 251
 252 /*
 253  * FDC state
 254  */
 255 struct floppy_fdc_state {
 256         int spec1;              /* spec1 value last used */
 257         int spec2;              /* spec2 value last used */
 258         int dtr;
 259         unsigned char version;  /* FDC version code */
 260         unsigned char dor;
 261         unsigned long address;  /* io address */
 262         unsigned int rawcmd:2;
 263         unsigned int reset:1;
 264         unsigned int need_configure:1;
 265         unsigned int perp_mode:2;
 266         unsigned int has_fifo:1;
 267         unsigned int driver_version;    /* version code for floppy driver */
 268 #define FD_DRIVER_VERSION 0x100
 269 /* user programs using the floppy API should use floppy_fdc_state to
 270  * get the version number of the floppy driver that they are running
 271  * on. If this version number is bigger than the one compiled into the
 272  * user program (the FD_DRIVER_VERSION define), it should be prepared
 273  * to bigger structures
 274  */
 275
 276         unsigned char track[4];
 277         /* Position of the heads of the 4 units attached to this FDC,
 278          * as stored on the FDC. In the future, the position as stored
 279          * on the FDC might not agree with the actual physical
 280          * position of these drive heads. By allowing such
 281          * disagreement, it will be possible to reset the FDC without
 282          * incurring the expensive cost of repositioning all heads.
 283          * Right now, these positions are hard wired to 0. */
 284
 285 };
 286
 287 #define FDGETFDCSTAT _IOR(2, 0x15, struct floppy_fdc_state)
 288
 289
 290 /*
 291  * Asynchronous Write error tracking
 292  */
 293 struct floppy_write_errors {
 294         /* Write error logging.
 295          *
 296          * These fields can be cleared with the FDWERRORCLR ioctl.
 297          * Only writes that were attempted but failed due to a physical media
 298          * error are logged.  write(2) calls that fail and return an error code
 299          * to the user process are not counted.
 300          */
 301
 302         unsigned int write_errors;  /* number of physical write errors
 303                                      * encountered */
 304
 305         /* position of first and last write errors */
 306         unsigned long first_error_sector;
 307         int           first_error_generation;
 308         unsigned long last_error_sector;
 309         int           last_error_generation;
 310
 311         unsigned int badness; /* highest retry count for a read or write
 312                                * operation */
 313 };
 314
 315 #define FDWERRORCLR  _IO(2, 0x56)
 316 /* clear write error and badness information */
 317 #define FDWERRORGET  _IOR(2, 0x17, struct floppy_write_errors)
 318 /* get write error and badness information */
 319
 320
 321 /*
 322  * Raw commands
 323  */
 324 /* new interface flag: now we can do them in batches */
 325 #define FDHAVEBATCHEDRAWCMD
 326
 327 struct floppy_raw_cmd {
 328         unsigned int flags;
 329 #define FD_RAW_READ 1
 330 #define FD_RAW_WRITE 2
 331 #define FD_RAW_NO_MOTOR 4
 332 #define FD_RAW_DISK_CHANGE 4 /* out: disk change flag was set */
 333 #define FD_RAW_INTR 8    /* wait for an interrupt */
 334 #define FD_RAW_SPIN 0x10 /* spin up the disk for this command */
 335 #define FD_RAW_NO_MOTOR_AFTER 0x20 /* switch the motor off after command
 336                                     * completion */
 337 #define FD_RAW_NEED_DISK 0x40  /* this command needs a disk to be present */
 338 #define FD_RAW_NEED_SEEK 0x80  /* this command uses an implied seek (soft) */
 339
 340 /* more "in" flags */
 341 #define FD_RAW_MORE 0x100  /* more records follow */
 342 #define FD_RAW_STOP_IF_FAILURE 0x200 /* stop if we encounter a failure */
 343 #define FD_RAW_STOP_IF_SUCCESS 0x400 /* stop if command successful */
 344 #define FD_RAW_SOFTFAILURE 0x800 /* consider the return value for failure
 345                                   * detection too */
 346
 347 /* more "out" flags */
 348 #define FD_RAW_FAILURE 0x10000 /* command sent to fdc, fdc returned error */
 349 #define FD_RAW_HARDFAILURE 0x20000 /* fdc had to be reset, or timed out */
 350
 351         void __user *data;
 352         char *kernel_data; /* location of data buffer in the kernel */
 353         struct floppy_raw_cmd *next; /* used for chaining of raw cmd's
 354                                       * within the kernel */
 355         long length; /* in: length of dma transfer. out: remaining bytes */
 356         long phys_length; /* physical length, if different from dma length */
 357         int buffer_length; /* length of allocated buffer */
 358
 359         unsigned char rate;
 360         unsigned char cmd_count;
 361         unsigned char cmd[16];
 362         unsigned char reply_count;
 363         unsigned char reply[16];
 364         int track;
 365         int resultcode;
 366
 367         int reserved1;
 368         int reserved2;
 369 };
 370
 371 #define FDRAWCMD _IO(2, 0x58)
 372 /* send a raw command to the fdc. Structure size not included, because of
 373  * batches */
 374
 375 #define FDTWADDLE _IO(2, 0x59)
 376 /* flicker motor-on bit before reading a sector. Experimental */
 377
 378
 379 #define FDEJECT _IO(2, 0x5a)
 380 /* eject the disk */
 381
 382
 383
 384 #endif /* _UAPI_LINUX_FD_H */