include/uapi/linux/lirc.h

   1 /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
   2 /*
   3  * lirc.h - linux infrared remote control header file
   4  * last modified 2010/07/13 by Jarod Wilson
   5  */
   6
   7 #ifndef _LINUX_LIRC_H
   8 #define _LINUX_LIRC_H
   9
  10 #include <linux/types.h>
  11 #include <linux/ioctl.h>
  12
  13 #define PULSE_BIT       0x01000000
  14 #define PULSE_MASK      0x00FFFFFF
  15
  16 #define LIRC_MODE2_SPACE     0x00000000
  17 #define LIRC_MODE2_PULSE     0x01000000
  18 #define LIRC_MODE2_FREQUENCY 0x02000000
  19 #define LIRC_MODE2_TIMEOUT   0x03000000
  20
  21 #define LIRC_VALUE_MASK      0x00FFFFFF
  22 #define LIRC_MODE2_MASK      0xFF000000
  23
  24 #define LIRC_SPACE(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_SPACE)
  25 #define LIRC_PULSE(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_PULSE)
  26 #define LIRC_FREQUENCY(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_FREQUENCY)
  27 #define LIRC_TIMEOUT(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_TIMEOUT)
  28
  29 #define LIRC_VALUE(val) ((val)&LIRC_VALUE_MASK)
  30 #define LIRC_MODE2(val) ((val)&LIRC_MODE2_MASK)
  31
  32 #define LIRC_IS_SPACE(val) (LIRC_MODE2(val) == LIRC_MODE2_SPACE)
  33 #define LIRC_IS_PULSE(val) (LIRC_MODE2(val) == LIRC_MODE2_PULSE)
  34 #define LIRC_IS_FREQUENCY(val) (LIRC_MODE2(val) == LIRC_MODE2_FREQUENCY)
  35 #define LIRC_IS_TIMEOUT(val) (LIRC_MODE2(val) == LIRC_MODE2_TIMEOUT)
  36
  37 /* used heavily by lirc userspace */
  38 #define lirc_t int
  39
  40 /*** lirc compatible hardware features ***/
  41
  42 #define LIRC_MODE2SEND(x) (x)
  43 #define LIRC_SEND2MODE(x) (x)
  44 #define LIRC_MODE2REC(x) ((x) << 16)
  45 #define LIRC_REC2MODE(x) ((x) >> 16)
  46
  47 #define LIRC_MODE_RAW                  0x00000001
  48 #define LIRC_MODE_PULSE                0x00000002
  49 #define LIRC_MODE_MODE2                0x00000004
  50 #define LIRC_MODE_SCANCODE             0x00000008
  51 #define LIRC_MODE_LIRCCODE             0x00000010
  52
  53
  54 #define LIRC_CAN_SEND_RAW              LIRC_MODE2SEND(LIRC_MODE_RAW)
  55 #define LIRC_CAN_SEND_PULSE            LIRC_MODE2SEND(LIRC_MODE_PULSE)
  56 #define LIRC_CAN_SEND_MODE2            LIRC_MODE2SEND(LIRC_MODE_MODE2)
  57 #define LIRC_CAN_SEND_SCANCODE         LIRC_MODE2SEND(LIRC_MODE_SCANCODE)
  58 #define LIRC_CAN_SEND_LIRCCODE         LIRC_MODE2SEND(LIRC_MODE_LIRCCODE)
  59
  60 #define LIRC_CAN_SEND_MASK             0x0000003f
  61
  62 #define LIRC_CAN_SET_SEND_CARRIER      0x00000100
  63 #define LIRC_CAN_SET_SEND_DUTY_CYCLE   0x00000200
  64 #define LIRC_CAN_SET_TRANSMITTER_MASK  0x00000400
  65
  66 #define LIRC_CAN_REC_RAW               LIRC_MODE2REC(LIRC_MODE_RAW)
  67 #define LIRC_CAN_REC_PULSE             LIRC_MODE2REC(LIRC_MODE_PULSE)
  68 #define LIRC_CAN_REC_MODE2             LIRC_MODE2REC(LIRC_MODE_MODE2)
  69 #define LIRC_CAN_REC_SCANCODE          LIRC_MODE2REC(LIRC_MODE_SCANCODE)
  70 #define LIRC_CAN_REC_LIRCCODE          LIRC_MODE2REC(LIRC_MODE_LIRCCODE)
  71
  72 #define LIRC_CAN_REC_MASK              LIRC_MODE2REC(LIRC_CAN_SEND_MASK)
  73
  74 #define LIRC_CAN_SET_REC_CARRIER       (LIRC_CAN_SET_SEND_CARRIER << 16)
  75 #define LIRC_CAN_SET_REC_DUTY_CYCLE    (LIRC_CAN_SET_SEND_DUTY_CYCLE << 16)
  76
  77 #define LIRC_CAN_SET_REC_DUTY_CYCLE_RANGE 0x40000000
  78 #define LIRC_CAN_SET_REC_CARRIER_RANGE    0x80000000
  79 #define LIRC_CAN_GET_REC_RESOLUTION       0x20000000
  80 #define LIRC_CAN_SET_REC_TIMEOUT          0x10000000
  81 #define LIRC_CAN_SET_REC_FILTER           0x08000000
  82
  83 #define LIRC_CAN_MEASURE_CARRIER          0x02000000
  84 #define LIRC_CAN_USE_WIDEBAND_RECEIVER    0x04000000
  85
  86 #define LIRC_CAN_SEND(x) ((x)&LIRC_CAN_SEND_MASK)
  87 #define LIRC_CAN_REC(x) ((x)&LIRC_CAN_REC_MASK)
  88
  89 #define LIRC_CAN_NOTIFY_DECODE            0x01000000
  90
  91 /*** IOCTL commands for lirc driver ***/
  92
  93 #define LIRC_GET_FEATURES              _IOR('i', 0x00000000, __u32)
  94
  95 #define LIRC_GET_SEND_MODE             _IOR('i', 0x00000001, __u32)
  96 #define LIRC_GET_REC_MODE              _IOR('i', 0x00000002, __u32)
  97 #define LIRC_GET_REC_RESOLUTION        _IOR('i', 0x00000007, __u32)
  98
  99 #define LIRC_GET_MIN_TIMEOUT           _IOR('i', 0x00000008, __u32)
 100 #define LIRC_GET_MAX_TIMEOUT           _IOR('i', 0x00000009, __u32)
 101
 102 /* code length in bits, currently only for LIRC_MODE_LIRCCODE */
 103 #define LIRC_GET_LENGTH                _IOR('i', 0x0000000f, __u32)
 104
 105 #define LIRC_SET_SEND_MODE             _IOW('i', 0x00000011, __u32)
 106 #define LIRC_SET_REC_MODE              _IOW('i', 0x00000012, __u32)
 107 /* Note: these can reset the according pulse_width */
 108 #define LIRC_SET_SEND_CARRIER          _IOW('i', 0x00000013, __u32)
 109 #define LIRC_SET_REC_CARRIER           _IOW('i', 0x00000014, __u32)
 110 #define LIRC_SET_SEND_DUTY_CYCLE       _IOW('i', 0x00000015, __u32)
 111 #define LIRC_SET_TRANSMITTER_MASK      _IOW('i', 0x00000017, __u32)
 112
 113 /*
 114  * when a timeout != 0 is set the driver will send a
 115  * LIRC_MODE2_TIMEOUT data packet, otherwise LIRC_MODE2_TIMEOUT is
 116  * never sent, timeout is disabled by default
 117  */
 118 #define LIRC_SET_REC_TIMEOUT           _IOW('i', 0x00000018, __u32)
 119
 120 /* 1 enables, 0 disables timeout reports in MODE2 */
 121 #define LIRC_SET_REC_TIMEOUT_REPORTS   _IOW('i', 0x00000019, __u32)
 122
 123 /*
 124  * if enabled from the next key press on the driver will send
 125  * LIRC_MODE2_FREQUENCY packets
 126  */
 127 #define LIRC_SET_MEASURE_CARRIER_MODE   _IOW('i', 0x0000001d, __u32)
 128
 129 /*
 130  * to set a range use LIRC_SET_REC_CARRIER_RANGE with the
 131  * lower bound first and later LIRC_SET_REC_CARRIER with the upper bound
 132  */
 133 #define LIRC_SET_REC_CARRIER_RANGE     _IOW('i', 0x0000001f, __u32)
 134
 135 #define LIRC_SET_WIDEBAND_RECEIVER     _IOW('i', 0x00000023, __u32)
 136
 137 /*
 138  * struct lirc_scancode - decoded scancode with protocol for use with
 139  *      LIRC_MODE_SCANCODE
 140  *
 141  * @timestamp: Timestamp in nanoseconds using CLOCK_MONOTONIC when IR
 142  *      was decoded.
 143  * @flags: should be 0 for transmit. When receiving scancodes,
 144  *      LIRC_SCANCODE_FLAG_TOGGLE or LIRC_SCANCODE_FLAG_REPEAT can be set
 145  *      depending on the protocol
 146  * @rc_proto: see enum rc_proto
 147  * @keycode: the translated keycode. Set to 0 for transmit.
 148  * @scancode: the scancode received or to be sent
 149  */
 150 struct lirc_scancode {
 151         __u64   timestamp;
 152         __u16   flags;
 153         __u16   rc_proto;
 154         __u32   keycode;
 155         __u64   scancode;
 156 };
 157
 158 /* Set if the toggle bit of rc-5 or rc-6 is enabled */
 159 #define LIRC_SCANCODE_FLAG_TOGGLE       1
 160 /* Set if this is a nec or sanyo repeat */
 161 #define LIRC_SCANCODE_FLAG_REPEAT       2
 162
 163 /**
 164  * enum rc_proto - the Remote Controller protocol
 165  *
 166  * @RC_PROTO_UNKNOWN: Protocol not known
 167  * @RC_PROTO_OTHER: Protocol known but proprietary
 168  * @RC_PROTO_RC5: Philips RC5 protocol
 169  * @RC_PROTO_RC5X_20: Philips RC5x 20 bit protocol
 170  * @RC_PROTO_RC5_SZ: StreamZap variant of RC5
 171  * @RC_PROTO_JVC: JVC protocol
 172  * @RC_PROTO_SONY12: Sony 12 bit protocol
 173  * @RC_PROTO_SONY15: Sony 15 bit protocol
 174  * @RC_PROTO_SONY20: Sony 20 bit protocol
 175  * @RC_PROTO_NEC: NEC protocol
 176  * @RC_PROTO_NECX: Extended NEC protocol
 177  * @RC_PROTO_NEC32: NEC 32 bit protocol
 178  * @RC_PROTO_SANYO: Sanyo protocol
 179  * @RC_PROTO_MCIR2_KBD: RC6-ish MCE keyboard
 180  * @RC_PROTO_MCIR2_MSE: RC6-ish MCE mouse
 181  * @RC_PROTO_RC6_0: Philips RC6-0-16 protocol
 182  * @RC_PROTO_RC6_6A_20: Philips RC6-6A-20 protocol
 183  * @RC_PROTO_RC6_6A_24: Philips RC6-6A-24 protocol
 184  * @RC_PROTO_RC6_6A_32: Philips RC6-6A-32 protocol
 185  * @RC_PROTO_RC6_MCE: MCE (Philips RC6-6A-32 subtype) protocol
 186  * @RC_PROTO_SHARP: Sharp protocol
 187  * @RC_PROTO_XMP: XMP protocol
 188  * @RC_PROTO_CEC: CEC protocol
 189  */
 190 enum rc_proto {
 191         RC_PROTO_UNKNOWN        = 0,
 192         RC_PROTO_OTHER          = 1,
 193         RC_PROTO_RC5            = 2,
 194         RC_PROTO_RC5X_20        = 3,
 195         RC_PROTO_RC5_SZ         = 4,
 196         RC_PROTO_JVC            = 5,
 197         RC_PROTO_SONY12         = 6,
 198         RC_PROTO_SONY15         = 7,
 199         RC_PROTO_SONY20         = 8,
 200         RC_PROTO_NEC            = 9,
 201         RC_PROTO_NECX           = 10,
 202         RC_PROTO_NEC32          = 11,
 203         RC_PROTO_SANYO          = 12,
 204         RC_PROTO_MCIR2_KBD      = 13,
 205         RC_PROTO_MCIR2_MSE      = 14,
 206         RC_PROTO_RC6_0          = 15,
 207         RC_PROTO_RC6_6A_20      = 16,
 208         RC_PROTO_RC6_6A_24      = 17,
 209         RC_PROTO_RC6_6A_32      = 18,
 210         RC_PROTO_RC6_MCE        = 19,
 211         RC_PROTO_SHARP          = 20,
 212         RC_PROTO_XMP            = 21,
 213         RC_PROTO_CEC            = 22,
 214 };
 215
 216 #endif