]> git.proxmox.com Git - mirror_ubuntu-artful-kernel.git/blob - include/uapi/linux/mroute6.h
uapi: define DIV_ROUND_UP for userland
[mirror_ubuntu-artful-kernel.git] / include / uapi / linux / mroute6.h
1 #ifndef _UAPI__LINUX_MROUTE6_H
2 #define _UAPI__LINUX_MROUTE6_H
3
4 #include <linux/kernel.h>
5 #include <linux/types.h>
6 #include <linux/sockios.h>
7
8 /*
9 * Based on the MROUTING 3.5 defines primarily to keep
10 * source compatibility with BSD.
11 *
12 * See the pim6sd code for the original history.
13 *
14 * Protocol Independent Multicast (PIM) data structures included
15 * Carlos Picoto (cap@di.fc.ul.pt)
16 *
17 */
18
19 #define MRT6_BASE 200
20 #define MRT6_INIT (MRT6_BASE) /* Activate the kernel mroute code */
21 #define MRT6_DONE (MRT6_BASE+1) /* Shutdown the kernel mroute */
22 #define MRT6_ADD_MIF (MRT6_BASE+2) /* Add a virtual interface */
23 #define MRT6_DEL_MIF (MRT6_BASE+3) /* Delete a virtual interface */
24 #define MRT6_ADD_MFC (MRT6_BASE+4) /* Add a multicast forwarding entry */
25 #define MRT6_DEL_MFC (MRT6_BASE+5) /* Delete a multicast forwarding entry */
26 #define MRT6_VERSION (MRT6_BASE+6) /* Get the kernel multicast version */
27 #define MRT6_ASSERT (MRT6_BASE+7) /* Activate PIM assert mode */
28 #define MRT6_PIM (MRT6_BASE+8) /* enable PIM code */
29 #define MRT6_TABLE (MRT6_BASE+9) /* Specify mroute table ID */
30 #define MRT6_ADD_MFC_PROXY (MRT6_BASE+10) /* Add a (*,*|G) mfc entry */
31 #define MRT6_DEL_MFC_PROXY (MRT6_BASE+11) /* Del a (*,*|G) mfc entry */
32 #define MRT6_MAX (MRT6_BASE+11)
33
34 #define SIOCGETMIFCNT_IN6 SIOCPROTOPRIVATE /* IP protocol privates */
35 #define SIOCGETSGCNT_IN6 (SIOCPROTOPRIVATE+1)
36 #define SIOCGETRPF (SIOCPROTOPRIVATE+2)
37
38 #define MAXMIFS 32
39 typedef unsigned long mifbitmap_t; /* User mode code depends on this lot */
40 typedef unsigned short mifi_t;
41 #define ALL_MIFS ((mifi_t)(-1))
42
43 #ifndef IF_SETSIZE
44 #define IF_SETSIZE 256
45 #endif
46
47 typedef __u32 if_mask;
48 #define NIFBITS (sizeof(if_mask) * 8) /* bits per mask */
49
50 typedef struct if_set {
51 if_mask ifs_bits[__KERNEL_DIV_ROUND_UP(IF_SETSIZE, NIFBITS)];
52 } if_set;
53
54 #define IF_SET(n, p) ((p)->ifs_bits[(n)/NIFBITS] |= (1 << ((n) % NIFBITS)))
55 #define IF_CLR(n, p) ((p)->ifs_bits[(n)/NIFBITS] &= ~(1 << ((n) % NIFBITS)))
56 #define IF_ISSET(n, p) ((p)->ifs_bits[(n)/NIFBITS] & (1 << ((n) % NIFBITS)))
57 #define IF_COPY(f, t) bcopy(f, t, sizeof(*(f)))
58 #define IF_ZERO(p) bzero(p, sizeof(*(p)))
59
60 /*
61 * Passed by mrouted for an MRT_ADD_MIF - again we use the
62 * mrouted 3.6 structures for compatibility
63 */
64
65 struct mif6ctl {
66 mifi_t mif6c_mifi; /* Index of MIF */
67 unsigned char mif6c_flags; /* MIFF_ flags */
68 unsigned char vifc_threshold; /* ttl limit */
69 __u16 mif6c_pifi; /* the index of the physical IF */
70 unsigned int vifc_rate_limit; /* Rate limiter values (NI) */
71 };
72
73 #define MIFF_REGISTER 0x1 /* register vif */
74
75 /*
76 * Cache manipulation structures for mrouted and PIMd
77 */
78
79 struct mf6cctl {
80 struct sockaddr_in6 mf6cc_origin; /* Origin of mcast */
81 struct sockaddr_in6 mf6cc_mcastgrp; /* Group in question */
82 mifi_t mf6cc_parent; /* Where it arrived */
83 struct if_set mf6cc_ifset; /* Where it is going */
84 };
85
86 /*
87 * Group count retrieval for pim6sd
88 */
89
90 struct sioc_sg_req6 {
91 struct sockaddr_in6 src;
92 struct sockaddr_in6 grp;
93 unsigned long pktcnt;
94 unsigned long bytecnt;
95 unsigned long wrong_if;
96 };
97
98 /*
99 * To get vif packet counts
100 */
101
102 struct sioc_mif_req6 {
103 mifi_t mifi; /* Which iface */
104 unsigned long icount; /* In packets */
105 unsigned long ocount; /* Out packets */
106 unsigned long ibytes; /* In bytes */
107 unsigned long obytes; /* Out bytes */
108 };
109
110 /*
111 * That's all usermode folks
112 */
113
114
115
116 /*
117 * Structure used to communicate from kernel to multicast router.
118 * We'll overlay the structure onto an MLD header (not an IPv6 heder like igmpmsg{}
119 * used for IPv4 implementation). This is because this structure will be passed via an
120 * IPv6 raw socket, on which an application will only receiver the payload i.e the data after
121 * the IPv6 header and all the extension headers. (See section 3 of RFC 3542)
122 */
123
124 struct mrt6msg {
125 #define MRT6MSG_NOCACHE 1
126 #define MRT6MSG_WRONGMIF 2
127 #define MRT6MSG_WHOLEPKT 3 /* used for use level encap */
128 __u8 im6_mbz; /* must be zero */
129 __u8 im6_msgtype; /* what type of message */
130 __u16 im6_mif; /* mif rec'd on */
131 __u32 im6_pad; /* padding for 64 bit arch */
132 struct in6_addr im6_src, im6_dst;
133 };
134
135 #endif /* _UAPI__LINUX_MROUTE6_H */