include/uapi/linux/usb/ch11.h

   1 /*
   2  * This file holds Hub protocol constants and data structures that are
   3  * defined in chapter 11 (Hub Specification) of the USB 2.0 specification.
   4  *
   5  * It is used/shared between the USB core, the HCDs and couple of other USB
   6  * drivers.
   7  */
   8
   9 #ifndef __LINUX_CH11_H
  10 #define __LINUX_CH11_H
  11
  12 #include <linux/types.h>        /* __u8 etc */
  13
  14 /* This is arbitrary.
  15  * From USB 2.0 spec Table 11-13, offset 7, a hub can
  16  * have up to 255 ports. The most yet reported is 10.
  17  *
  18  * Current Wireless USB host hardware (Intel i1480 for example) allows
  19  * up to 22 devices to connect. Upcoming hardware might raise that
  20  * limit. Because the arrays need to add a bit for hub status data, we
  21  * use 31, so plus one evens out to four bytes.
  22  */
  23 #define USB_MAXCHILDREN         31
  24
  25 /* See USB 3.1 spec Table 10-5 */
  26 #define USB_SS_MAXPORTS         15
  27
  28 /*
  29  * Hub request types
  30  */
  31
  32 #define USB_RT_HUB      (USB_TYPE_CLASS | USB_RECIP_DEVICE)
  33 #define USB_RT_PORT     (USB_TYPE_CLASS | USB_RECIP_OTHER)
  34
  35 /*
  36  * Port status type for GetPortStatus requests added in USB 3.1
  37  * See USB 3.1 spec Table 10-12
  38  */
  39 #define HUB_PORT_STATUS         0
  40 #define HUB_PORT_PD_STATUS      1
  41 #define HUB_EXT_PORT_STATUS     2
  42
  43 /*
  44  * Hub class requests
  45  * See USB 2.0 spec Table 11-16
  46  */
  47 #define HUB_CLEAR_TT_BUFFER     8
  48 #define HUB_RESET_TT            9
  49 #define HUB_GET_TT_STATE        10
  50 #define HUB_STOP_TT             11
  51
  52 /*
  53  * Hub class additional requests defined by USB 3.0 spec
  54  * See USB 3.0 spec Table 10-6
  55  */
  56 #define HUB_SET_DEPTH           12
  57 #define HUB_GET_PORT_ERR_COUNT  13
  58
  59 /*
  60  * Hub Class feature numbers
  61  * See USB 2.0 spec Table 11-17
  62  */
  63 #define C_HUB_LOCAL_POWER       0
  64 #define C_HUB_OVER_CURRENT      1
  65
  66 /*
  67  * Port feature numbers
  68  * See USB 2.0 spec Table 11-17
  69  */
  70 #define USB_PORT_FEAT_CONNECTION        0
  71 #define USB_PORT_FEAT_ENABLE            1
  72 #define USB_PORT_FEAT_SUSPEND           2       /* L2 suspend */
  73 #define USB_PORT_FEAT_OVER_CURRENT      3
  74 #define USB_PORT_FEAT_RESET             4
  75 #define USB_PORT_FEAT_L1                5       /* L1 suspend */
  76 #define USB_PORT_FEAT_POWER             8
  77 #define USB_PORT_FEAT_LOWSPEED          9       /* Should never be used */
  78 #define USB_PORT_FEAT_C_CONNECTION      16
  79 #define USB_PORT_FEAT_C_ENABLE          17
  80 #define USB_PORT_FEAT_C_SUSPEND         18
  81 #define USB_PORT_FEAT_C_OVER_CURRENT    19
  82 #define USB_PORT_FEAT_C_RESET           20
  83 #define USB_PORT_FEAT_TEST              21
  84 #define USB_PORT_FEAT_INDICATOR         22
  85 #define USB_PORT_FEAT_C_PORT_L1         23
  86
  87 /*
  88  * Port feature selectors added by USB 3.0 spec.
  89  * See USB 3.0 spec Table 10-7
  90  */
  91 #define USB_PORT_FEAT_LINK_STATE                5
  92 #define USB_PORT_FEAT_U1_TIMEOUT                23
  93 #define USB_PORT_FEAT_U2_TIMEOUT                24
  94 #define USB_PORT_FEAT_C_PORT_LINK_STATE         25
  95 #define USB_PORT_FEAT_C_PORT_CONFIG_ERROR       26
  96 #define USB_PORT_FEAT_REMOTE_WAKE_MASK          27
  97 #define USB_PORT_FEAT_BH_PORT_RESET             28
  98 #define USB_PORT_FEAT_C_BH_PORT_RESET           29
  99 #define USB_PORT_FEAT_FORCE_LINKPM_ACCEPT       30
 100
 101 #define USB_PORT_LPM_TIMEOUT(p)                 (((p) & 0xff) << 8)
 102
 103 /* USB 3.0 hub remote wake mask bits, see table 10-14 */
 104 #define USB_PORT_FEAT_REMOTE_WAKE_CONNECT       (1 << 8)
 105 #define USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT    (1 << 9)
 106 #define USB_PORT_FEAT_REMOTE_WAKE_OVER_CURRENT  (1 << 10)
 107
 108 /*
 109  * Hub Status and Hub Change results
 110  * See USB 2.0 spec Table 11-19 and Table 11-20
 111  * USB 3.1 extends the port status request and may return 4 additional bytes.
 112  * See USB 3.1 spec section 10.16.2.6 Table 10-12 and 10-15
 113  */
 114 struct usb_port_status {
 115         __le16 wPortStatus;
 116         __le16 wPortChange;
 117         __le32 dwExtPortStatus;
 118 } __attribute__ ((packed));
 119
 120 /*
 121  * wPortStatus bit field
 122  * See USB 2.0 spec Table 11-21
 123  */
 124 #define USB_PORT_STAT_CONNECTION        0x0001
 125 #define USB_PORT_STAT_ENABLE            0x0002
 126 #define USB_PORT_STAT_SUSPEND           0x0004
 127 #define USB_PORT_STAT_OVERCURRENT       0x0008
 128 #define USB_PORT_STAT_RESET             0x0010
 129 #define USB_PORT_STAT_L1                0x0020
 130 /* bits 6 to 7 are reserved */
 131 #define USB_PORT_STAT_POWER             0x0100
 132 #define USB_PORT_STAT_LOW_SPEED         0x0200
 133 #define USB_PORT_STAT_HIGH_SPEED        0x0400
 134 #define USB_PORT_STAT_TEST              0x0800
 135 #define USB_PORT_STAT_INDICATOR         0x1000
 136 /* bits 13 to 15 are reserved */
 137
 138 /*
 139  * Additions to wPortStatus bit field from USB 3.0
 140  * See USB 3.0 spec Table 10-10
 141  */
 142 #define USB_PORT_STAT_LINK_STATE        0x01e0
 143 #define USB_SS_PORT_STAT_POWER          0x0200
 144 #define USB_SS_PORT_STAT_SPEED          0x1c00
 145 #define USB_PORT_STAT_SPEED_5GBPS       0x0000
 146 /* Valid only if port is enabled */
 147 /* Bits that are the same from USB 2.0 */
 148 #define USB_SS_PORT_STAT_MASK (USB_PORT_STAT_CONNECTION |           \
 149                                 USB_PORT_STAT_ENABLE |      \
 150                                 USB_PORT_STAT_OVERCURRENT | \
 151                                 USB_PORT_STAT_RESET)
 152
 153 /*
 154  * Definitions for PORT_LINK_STATE values
 155  * (bits 5-8) in wPortStatus
 156  */
 157 #define USB_SS_PORT_LS_U0               0x0000
 158 #define USB_SS_PORT_LS_U1               0x0020
 159 #define USB_SS_PORT_LS_U2               0x0040
 160 #define USB_SS_PORT_LS_U3               0x0060
 161 #define USB_SS_PORT_LS_SS_DISABLED      0x0080
 162 #define USB_SS_PORT_LS_RX_DETECT        0x00a0
 163 #define USB_SS_PORT_LS_SS_INACTIVE      0x00c0
 164 #define USB_SS_PORT_LS_POLLING          0x00e0
 165 #define USB_SS_PORT_LS_RECOVERY         0x0100
 166 #define USB_SS_PORT_LS_HOT_RESET        0x0120
 167 #define USB_SS_PORT_LS_COMP_MOD         0x0140
 168 #define USB_SS_PORT_LS_LOOPBACK         0x0160
 169
 170 /*
 171  * wPortChange bit field
 172  * See USB 2.0 spec Table 11-22 and USB 2.0 LPM ECN Table-4.10
 173  * Bits 0 to 5 shown, bits 6 to 15 are reserved
 174  */
 175 #define USB_PORT_STAT_C_CONNECTION      0x0001
 176 #define USB_PORT_STAT_C_ENABLE          0x0002
 177 #define USB_PORT_STAT_C_SUSPEND         0x0004
 178 #define USB_PORT_STAT_C_OVERCURRENT     0x0008
 179 #define USB_PORT_STAT_C_RESET           0x0010
 180 #define USB_PORT_STAT_C_L1              0x0020
 181 /*
 182  * USB 3.0 wPortChange bit fields
 183  * See USB 3.0 spec Table 10-11
 184  */
 185 #define USB_PORT_STAT_C_BH_RESET        0x0020
 186 #define USB_PORT_STAT_C_LINK_STATE      0x0040
 187 #define USB_PORT_STAT_C_CONFIG_ERROR    0x0080
 188
 189 /*
 190  * USB 3.1 dwExtPortStatus field masks
 191  * See USB 3.1 spec 10.16.2.6.3 Table 10-15
 192  */
 193
 194 #define USB_EXT_PORT_STAT_RX_SPEED_ID   0x0000000f
 195 #define USB_EXT_PORT_STAT_TX_SPEED_ID   0x000000f0
 196 #define USB_EXT_PORT_STAT_RX_LANES      0x00000f00
 197 #define USB_EXT_PORT_STAT_TX_LANES      0x0000f000
 198
 199 /*
 200  * wHubCharacteristics (masks)
 201  * See USB 2.0 spec Table 11-13, offset 3
 202  */
 203 #define HUB_CHAR_LPSM           0x0003 /* Logical Power Switching Mode mask */
 204 #define HUB_CHAR_COMMON_LPSM    0x0000 /* All ports power control at once */
 205 #define HUB_CHAR_INDV_PORT_LPSM 0x0001 /* per-port power control */
 206 #define HUB_CHAR_NO_LPSM        0x0002 /* no power switching */
 207
 208 #define HUB_CHAR_COMPOUND       0x0004 /* hub is part of a compound device */
 209
 210 #define HUB_CHAR_OCPM           0x0018 /* Over-Current Protection Mode mask */
 211 #define HUB_CHAR_COMMON_OCPM    0x0000 /* All ports Over-Current reporting */
 212 #define HUB_CHAR_INDV_PORT_OCPM 0x0008 /* per-port Over-current reporting */
 213 #define HUB_CHAR_NO_OCPM        0x0010 /* No Over-current Protection support */
 214
 215 #define HUB_CHAR_TTTT           0x0060 /* TT Think Time mask */
 216 #define HUB_CHAR_PORTIND        0x0080 /* per-port indicators (LEDs) */
 217
 218 struct usb_hub_status {
 219         __le16 wHubStatus;
 220         __le16 wHubChange;
 221 } __attribute__ ((packed));
 222
 223 /*
 224  * Hub Status & Hub Change bit masks
 225  * See USB 2.0 spec Table 11-19 and Table 11-20
 226  * Bits 0 and 1 for wHubStatus and wHubChange
 227  * Bits 2 to 15 are reserved for both
 228  */
 229 #define HUB_STATUS_LOCAL_POWER  0x0001
 230 #define HUB_STATUS_OVERCURRENT  0x0002
 231 #define HUB_CHANGE_LOCAL_POWER  0x0001
 232 #define HUB_CHANGE_OVERCURRENT  0x0002
 233
 234
 235 /*
 236  * Hub descriptor
 237  * See USB 2.0 spec Table 11-13
 238  */
 239
 240 #define USB_DT_HUB                      (USB_TYPE_CLASS | 0x09)
 241 #define USB_DT_SS_HUB                   (USB_TYPE_CLASS | 0x0a)
 242 #define USB_DT_HUB_NONVAR_SIZE          7
 243 #define USB_DT_SS_HUB_SIZE              12
 244
 245 /*
 246  * Hub Device descriptor
 247  * USB Hub class device protocols
 248  */
 249
 250 #define USB_HUB_PR_FS           0 /* Full speed hub */
 251 #define USB_HUB_PR_HS_NO_TT     0 /* Hi-speed hub without TT */
 252 #define USB_HUB_PR_HS_SINGLE_TT 1 /* Hi-speed hub with single TT */
 253 #define USB_HUB_PR_HS_MULTI_TT  2 /* Hi-speed hub with multiple TT */
 254 #define USB_HUB_PR_SS           3 /* Super speed hub */
 255
 256 struct usb_hub_descriptor {
 257         __u8  bDescLength;
 258         __u8  bDescriptorType;
 259         __u8  bNbrPorts;
 260         __le16 wHubCharacteristics;
 261         __u8  bPwrOn2PwrGood;
 262         __u8  bHubContrCurrent;
 263
 264         /* 2.0 and 3.0 hubs differ here */
 265         union {
 266                 struct {
 267                         /* add 1 bit for hub status change; round to bytes */
 268                         __u8  DeviceRemovable[(USB_MAXCHILDREN + 1 + 7) / 8];
 269                         __u8  PortPwrCtrlMask[(USB_MAXCHILDREN + 1 + 7) / 8];
 270                 }  __attribute__ ((packed)) hs;
 271
 272                 struct {
 273                         __u8 bHubHdrDecLat;
 274                         __le16 wHubDelay;
 275                         __le16 DeviceRemovable;
 276                 }  __attribute__ ((packed)) ss;
 277         } u;
 278 } __attribute__ ((packed));
 279
 280 /* port indicator status selectors, tables 11-7 and 11-25 */
 281 #define HUB_LED_AUTO    0
 282 #define HUB_LED_AMBER   1
 283 #define HUB_LED_GREEN   2
 284 #define HUB_LED_OFF     3
 285
 286 enum hub_led_mode {
 287         INDICATOR_AUTO = 0,
 288         INDICATOR_CYCLE,
 289         /* software blinks for attention:  software, hardware, reserved */
 290         INDICATOR_GREEN_BLINK, INDICATOR_GREEN_BLINK_OFF,
 291         INDICATOR_AMBER_BLINK, INDICATOR_AMBER_BLINK_OFF,
 292         INDICATOR_ALT_BLINK, INDICATOR_ALT_BLINK_OFF
 293 } __attribute__ ((packed));
 294
 295 /* Transaction Translator Think Times, in bits */
 296 #define HUB_TTTT_8_BITS         0x00
 297 #define HUB_TTTT_16_BITS        0x20
 298 #define HUB_TTTT_24_BITS        0x40
 299 #define HUB_TTTT_32_BITS        0x60
 300
 301 #endif /* __LINUX_CH11_H */