7 option env="KERNELVERSION"
13 default "/lib/modules/$UNAME_RELEASE/.config"
14 default "/etc/kernel-config"
15 default "/boot/config-$UNAME_RELEASE"
16 default "$ARCH_DEFCONFIG"
17 default "arch/$ARCH/defconfig"
28 depends on HAVE_IRQ_WORK
30 config BUILDTIME_EXTABLE_SORT
36 bool "Prompt for development and/or incomplete code/drivers"
38 Some of the various things that Linux supports (such as network
39 drivers, file systems, network protocols, etc.) can be in a state
40 of development where the functionality, stability, or the level of
41 testing is not yet high enough for general use. This is usually
42 known as the "alpha-test" phase among developers. If a feature is
43 currently in alpha-test, then the developers usually discourage
44 uninformed widespread use of this feature by the general public to
45 avoid "Why doesn't this work?" type mail messages. However, active
46 testing and use of these systems is welcomed. Just be aware that it
47 may not meet the normal level of reliability or it may fail to work
48 in some special cases. Detailed bug reports from people familiar
49 with the kernel internals are usually welcomed by the developers
50 (before submitting bug reports, please read the documents
51 <file:README>, <file:MAINTAINERS>, <file:REPORTING-BUGS>,
52 <file:Documentation/BUG-HUNTING>, and
53 <file:Documentation/oops-tracing.txt> in the kernel source).
55 This option will also make obsoleted drivers available. These are
56 drivers that have been replaced by something else, and/or are
57 scheduled to be removed in a future kernel release.
59 Unless you intend to help test and develop a feature or driver that
60 falls into this category, or you have a situation that requires
61 using these features, you should probably say N here, which will
62 cause the configurator to present you with fewer choices. If
63 you say Y here, you will be offered the choice of using features or
64 drivers that are currently considered to be in the alpha-test phase.
71 depends on BROKEN || !SMP
74 config INIT_ENV_ARG_LIMIT
79 Maximum of each of the number of arguments and environment
80 variables passed to init from the kernel command line.
84 string "Cross-compiler tool prefix"
86 Same as running 'make CROSS_COMPILE=prefix-' but stored for
87 default make runs in this kernel build directory. You don't
88 need to set this unless you want the configured kernel build
89 directory to select the cross-compiler automatically.
92 string "Local version - append to kernel release"
94 Append an extra string to the end of your kernel version.
95 This will show up when you type uname, for example.
96 The string you set here will be appended after the contents of
97 any files with a filename matching localversion* in your
98 object and source tree, in that order. Your total string can
99 be a maximum of 64 characters.
101 config LOCALVERSION_AUTO
102 bool "Automatically append version information to the version string"
105 This will try to automatically determine if the current tree is a
106 release tree by looking for git tags that belong to the current
107 top of tree revision.
109 A string of the format -gxxxxxxxx will be added to the localversion
110 if a git-based tree is found. The string generated by this will be
111 appended after any matching localversion* files, and after the value
112 set in CONFIG_LOCALVERSION.
114 (The actual string used here is the first eight characters produced
115 by running the command:
117 $ git rev-parse --verify HEAD
119 which is done within the script "scripts/setlocalversion".)
121 config HAVE_KERNEL_GZIP
124 config HAVE_KERNEL_BZIP2
127 config HAVE_KERNEL_LZMA
130 config HAVE_KERNEL_XZ
133 config HAVE_KERNEL_LZO
137 prompt "Kernel compression mode"
139 depends on HAVE_KERNEL_GZIP || HAVE_KERNEL_BZIP2 || HAVE_KERNEL_LZMA || HAVE_KERNEL_XZ || HAVE_KERNEL_LZO
141 The linux kernel is a kind of self-extracting executable.
142 Several compression algorithms are available, which differ
143 in efficiency, compression and decompression speed.
144 Compression speed is only relevant when building a kernel.
145 Decompression speed is relevant at each boot.
147 If you have any problems with bzip2 or lzma compressed
148 kernels, mail me (Alain Knaff) <alain@knaff.lu>. (An older
149 version of this functionality (bzip2 only), for 2.4, was
150 supplied by Christian Ludwig)
152 High compression options are mostly useful for users, who
153 are low on disk space (embedded systems), but for whom ram
156 If in doubt, select 'gzip'
160 depends on HAVE_KERNEL_GZIP
162 The old and tried gzip compression. It provides a good balance
163 between compression ratio and decompression speed.
167 depends on HAVE_KERNEL_BZIP2
169 Its compression ratio and speed is intermediate.
170 Decompression speed is slowest among the choices. The kernel
171 size is about 10% smaller with bzip2, in comparison to gzip.
172 Bzip2 uses a large amount of memory. For modern kernels you
173 will need at least 8MB RAM or more for booting.
177 depends on HAVE_KERNEL_LZMA
179 This compression algorithm's ratio is best. Decompression speed
180 is between gzip and bzip2. Compression is slowest.
181 The kernel size is about 33% smaller with LZMA in comparison to gzip.
185 depends on HAVE_KERNEL_XZ
187 XZ uses the LZMA2 algorithm and instruction set specific
188 BCJ filters which can improve compression ratio of executable
189 code. The size of the kernel is about 30% smaller with XZ in
190 comparison to gzip. On architectures for which there is a BCJ
191 filter (i386, x86_64, ARM, IA-64, PowerPC, and SPARC), XZ
192 will create a few percent smaller kernel than plain LZMA.
194 The speed is about the same as with LZMA: The decompression
195 speed of XZ is better than that of bzip2 but worse than gzip
196 and LZO. Compression is slow.
200 depends on HAVE_KERNEL_LZO
202 Its compression ratio is the poorest among the choices. The kernel
203 size is about 10% bigger than gzip; however its speed
204 (both compression and decompression) is the fastest.
208 config DEFAULT_HOSTNAME
209 string "Default hostname"
212 This option determines the default system hostname before userspace
213 calls sethostname(2). The kernel traditionally uses "(none)" here,
214 but you may wish to use a different default here to make a minimal
215 system more usable with less configuration.
218 bool "Support for paging of anonymous memory (swap)"
219 depends on MMU && BLOCK
222 This option allows you to choose whether you want to have support
223 for so called swap devices or swap files in your kernel that are
224 used to provide more virtual memory than the actual RAM present
225 in your computer. If unsure say Y.
230 Inter Process Communication is a suite of library functions and
231 system calls which let processes (running programs) synchronize and
232 exchange information. It is generally considered to be a good thing,
233 and some programs won't run unless you say Y here. In particular, if
234 you want to run the DOS emulator dosemu under Linux (read the
235 DOSEMU-HOWTO, available from <http://www.tldp.org/docs.html#howto>),
236 you'll need to say Y here.
238 You can find documentation about IPC with "info ipc" and also in
239 section 6.4 of the Linux Programmer's Guide, available from
240 <http://www.tldp.org/guides.html>.
242 config SYSVIPC_SYSCTL
249 bool "POSIX Message Queues"
250 depends on NET && EXPERIMENTAL
252 POSIX variant of message queues is a part of IPC. In POSIX message
253 queues every message has a priority which decides about succession
254 of receiving it by a process. If you want to compile and run
255 programs written e.g. for Solaris with use of its POSIX message
256 queues (functions mq_*) say Y here.
258 POSIX message queues are visible as a filesystem called 'mqueue'
259 and can be mounted somewhere if you want to do filesystem
260 operations on message queues.
264 config POSIX_MQUEUE_SYSCTL
266 depends on POSIX_MQUEUE
270 config BSD_PROCESS_ACCT
271 bool "BSD Process Accounting"
273 If you say Y here, a user level program will be able to instruct the
274 kernel (via a special system call) to write process accounting
275 information to a file: whenever a process exits, information about
276 that process will be appended to the file by the kernel. The
277 information includes things such as creation time, owning user,
278 command name, memory usage, controlling terminal etc. (the complete
279 list is in the struct acct in <file:include/linux/acct.h>). It is
280 up to the user level program to do useful things with this
281 information. This is generally a good idea, so say Y.
283 config BSD_PROCESS_ACCT_V3
284 bool "BSD Process Accounting version 3 file format"
285 depends on BSD_PROCESS_ACCT
288 If you say Y here, the process accounting information is written
289 in a new file format that also logs the process IDs of each
290 process and it's parent. Note that this file format is incompatible
291 with previous v0/v1/v2 file formats, so you will need updated tools
292 for processing it. A preliminary version of these tools is available
293 at <http://www.gnu.org/software/acct/>.
296 bool "open by fhandle syscalls"
299 If you say Y here, a user level program will be able to map
300 file names to handle and then later use the handle for
301 different file system operations. This is useful in implementing
302 userspace file servers, which now track files using handles instead
303 of names. The handle would remain the same even if file names
304 get renamed. Enables open_by_handle_at(2) and name_to_handle_at(2)
308 bool "Export task/process statistics through netlink (EXPERIMENTAL)"
312 Export selected statistics for tasks/processes through the
313 generic netlink interface. Unlike BSD process accounting, the
314 statistics are available during the lifetime of tasks/processes as
315 responses to commands. Like BSD accounting, they are sent to user
320 config TASK_DELAY_ACCT
321 bool "Enable per-task delay accounting (EXPERIMENTAL)"
324 Collect information on time spent by a task waiting for system
325 resources like cpu, synchronous block I/O completion and swapping
326 in pages. Such statistics can help in setting a task's priorities
327 relative to other tasks for cpu, io, rss limits etc.
332 bool "Enable extended accounting over taskstats (EXPERIMENTAL)"
335 Collect extended task accounting data and send the data
336 to userland for processing over the taskstats interface.
340 config TASK_IO_ACCOUNTING
341 bool "Enable per-task storage I/O accounting (EXPERIMENTAL)"
342 depends on TASK_XACCT
344 Collect information on the number of bytes of storage I/O which this
350 bool "Auditing support"
353 Enable auditing infrastructure that can be used with another
354 kernel subsystem, such as SELinux (which requires this for
355 logging of avc messages output). Does not do system-call
356 auditing without CONFIG_AUDITSYSCALL.
359 bool "Enable system-call auditing support"
360 depends on AUDIT && (X86 || PPC || S390 || IA64 || UML || SPARC64 || SUPERH || (ARM && AEABI && !OABI_COMPAT))
361 default y if SECURITY_SELINUX
363 Enable low-overhead system-call auditing infrastructure that
364 can be used independently or with another kernel subsystem,
369 depends on AUDITSYSCALL
374 depends on AUDITSYSCALL
377 config AUDIT_LOGINUID_IMMUTABLE
378 bool "Make audit loginuid immutable"
381 The config option toggles if a task setting its loginuid requires
382 CAP_SYS_AUDITCONTROL or if that task should require no special permissions
383 but should instead only allow setting its loginuid if it was never
384 previously set. On systems which use systemd or a similar central
385 process to restart login services this should be set to true. On older
386 systems in which an admin would typically have to directly stop and
387 start processes this should be set to false. Setting this to true allows
388 one to drop potentially dangerous capabilites from the login tasks,
389 but may not be backwards compatible with older init systems.
391 source "kernel/irq/Kconfig"
392 source "kernel/time/Kconfig"
397 prompt "RCU Implementation"
401 bool "Tree-based hierarchical RCU"
402 depends on !PREEMPT && SMP
404 This option selects the RCU implementation that is
405 designed for very large SMP system with hundreds or
406 thousands of CPUs. It also scales down nicely to
409 config TREE_PREEMPT_RCU
410 bool "Preemptible tree-based hierarchical RCU"
411 depends on PREEMPT && SMP
413 This option selects the RCU implementation that is
414 designed for very large SMP systems with hundreds or
415 thousands of CPUs, but for which real-time response
416 is also required. It also scales down nicely to
420 bool "UP-only small-memory-footprint RCU"
421 depends on !PREEMPT && !SMP
423 This option selects the RCU implementation that is
424 designed for UP systems from which real-time response
425 is not required. This option greatly reduces the
426 memory footprint of RCU.
428 config TINY_PREEMPT_RCU
429 bool "Preemptible UP-only small-memory-footprint RCU"
430 depends on PREEMPT && !SMP
432 This option selects the RCU implementation that is designed
433 for real-time UP systems. This option greatly reduces the
434 memory footprint of RCU.
439 def_bool ( TREE_PREEMPT_RCU || TINY_PREEMPT_RCU )
441 This option enables preemptible-RCU code that is common between
442 the TREE_PREEMPT_RCU and TINY_PREEMPT_RCU implementations.
445 int "Tree-based hierarchical RCU fanout value"
448 depends on TREE_RCU || TREE_PREEMPT_RCU
452 This option controls the fanout of hierarchical implementations
453 of RCU, allowing RCU to work efficiently on machines with
454 large numbers of CPUs. This value must be at least the fourth
455 root of NR_CPUS, which allows NR_CPUS to be insanely large.
456 The default value of RCU_FANOUT should be used for production
457 systems, but if you are stress-testing the RCU implementation
458 itself, small RCU_FANOUT values allow you to test large-system
459 code paths on small(er) systems.
461 Select a specific number if testing RCU itself.
462 Take the default if unsure.
464 config RCU_FANOUT_LEAF
465 int "Tree-based hierarchical RCU leaf-level fanout value"
466 range 2 RCU_FANOUT if 64BIT
467 range 2 RCU_FANOUT if !64BIT
468 depends on TREE_RCU || TREE_PREEMPT_RCU
471 This option controls the leaf-level fanout of hierarchical
472 implementations of RCU, and allows trading off cache misses
473 against lock contention. Systems that synchronize their
474 scheduling-clock interrupts for energy-efficiency reasons will
475 want the default because the smaller leaf-level fanout keeps
476 lock contention levels acceptably low. Very large systems
477 (hundreds or thousands of CPUs) will instead want to set this
478 value to the maximum value possible in order to reduce the
479 number of cache misses incurred during RCU's grace-period
480 initialization. These systems tend to run CPU-bound, and thus
481 are not helped by synchronized interrupts, and thus tend to
482 skew them, which reduces lock contention enough that large
483 leaf-level fanouts work well.
485 Select a specific number if testing RCU itself.
487 Select the maximum permissible value for large systems.
489 Take the default if unsure.
491 config RCU_FANOUT_EXACT
492 bool "Disable tree-based hierarchical RCU auto-balancing"
493 depends on TREE_RCU || TREE_PREEMPT_RCU
496 This option forces use of the exact RCU_FANOUT value specified,
497 regardless of imbalances in the hierarchy. This is useful for
498 testing RCU itself, and might one day be useful on systems with
499 strong NUMA behavior.
501 Without RCU_FANOUT_EXACT, the code will balance the hierarchy.
505 config RCU_FAST_NO_HZ
506 bool "Accelerate last non-dyntick-idle CPU's grace periods"
507 depends on NO_HZ && SMP
510 This option causes RCU to attempt to accelerate grace periods
511 in order to allow CPUs to enter dynticks-idle state more
512 quickly. On the other hand, this option increases the overhead
513 of the dynticks-idle checking, particularly on systems with
514 large numbers of CPUs.
516 Say Y if energy efficiency is critically important, particularly
517 if you have relatively few CPUs.
519 Say N if you are unsure.
521 config TREE_RCU_TRACE
522 def_bool RCU_TRACE && ( TREE_RCU || TREE_PREEMPT_RCU )
525 This option provides tracing for the TREE_RCU and
526 TREE_PREEMPT_RCU implementations, permitting Makefile to
527 trivially select kernel/rcutree_trace.c.
530 bool "Enable RCU priority boosting"
531 depends on RT_MUTEXES && PREEMPT_RCU
534 This option boosts the priority of preempted RCU readers that
535 block the current preemptible RCU grace period for too long.
536 This option also prevents heavy loads from blocking RCU
537 callback invocation for all flavors of RCU.
539 Say Y here if you are working with real-time apps or heavy loads
540 Say N here if you are unsure.
542 config RCU_BOOST_PRIO
543 int "Real-time priority to boost RCU readers to"
548 This option specifies the real-time priority to which long-term
549 preempted RCU readers are to be boosted. If you are working
550 with a real-time application that has one or more CPU-bound
551 threads running at a real-time priority level, you should set
552 RCU_BOOST_PRIO to a priority higher then the highest-priority
553 real-time CPU-bound thread. The default RCU_BOOST_PRIO value
554 of 1 is appropriate in the common case, which is real-time
555 applications that do not have any CPU-bound threads.
557 Some real-time applications might not have a single real-time
558 thread that saturates a given CPU, but instead might have
559 multiple real-time threads that, taken together, fully utilize
560 that CPU. In this case, you should set RCU_BOOST_PRIO to
561 a priority higher than the lowest-priority thread that is
562 conspiring to prevent the CPU from running any non-real-time
563 tasks. For example, if one thread at priority 10 and another
564 thread at priority 5 are between themselves fully consuming
565 the CPU time on a given CPU, then RCU_BOOST_PRIO should be
566 set to priority 6 or higher.
568 Specify the real-time priority, or take the default if unsure.
570 config RCU_BOOST_DELAY
571 int "Milliseconds to delay boosting after RCU grace-period start"
576 This option specifies the time to wait after the beginning of
577 a given grace period before priority-boosting preempted RCU
578 readers blocking that grace period. Note that any RCU reader
579 blocking an expedited RCU grace period is boosted immediately.
581 Accept the default if unsure.
583 endmenu # "RCU Subsystem"
586 tristate "Kernel .config support"
588 This option enables the complete Linux kernel ".config" file
589 contents to be saved in the kernel. It provides documentation
590 of which kernel options are used in a running kernel or in an
591 on-disk kernel. This information can be extracted from the kernel
592 image file with the script scripts/extract-ikconfig and used as
593 input to rebuild the current kernel or to build another kernel.
594 It can also be extracted from a running kernel by reading
595 /proc/config.gz if enabled (below).
598 bool "Enable access to .config through /proc/config.gz"
599 depends on IKCONFIG && PROC_FS
601 This option enables access to the kernel configuration file
602 through /proc/config.gz.
605 int "Kernel log buffer size (16 => 64KB, 17 => 128KB)"
609 Select kernel log buffer size as a power of 2.
619 # Architectures with an unreliable sched_clock() should select this:
621 config HAVE_UNSTABLE_SCHED_CLOCK
625 boolean "Control Group support"
628 This option adds support for grouping sets of processes together, for
629 use with process control subsystems such as Cpusets, CFS, memory
630 controls or device isolation.
632 - Documentation/scheduler/sched-design-CFS.txt (CFS)
633 - Documentation/cgroups/ (features for grouping, isolation
634 and resource control)
641 bool "Example debug cgroup subsystem"
644 This option enables a simple cgroup subsystem that
645 exports useful debugging information about the cgroups
650 config CGROUP_FREEZER
651 bool "Freezer cgroup subsystem"
653 Provides a way to freeze and unfreeze all tasks in a
657 bool "Device controller for cgroups"
659 Provides a cgroup implementing whitelists for devices which
660 a process in the cgroup can mknod or open.
663 bool "Cpuset support"
665 This option will let you create and manage CPUSETs which
666 allow dynamically partitioning a system into sets of CPUs and
667 Memory Nodes and assigning tasks to run only within those sets.
668 This is primarily useful on large SMP or NUMA systems.
672 config PROC_PID_CPUSET
673 bool "Include legacy /proc/<pid>/cpuset file"
677 config CGROUP_CPUACCT
678 bool "Simple CPU accounting cgroup subsystem"
680 Provides a simple Resource Controller for monitoring the
681 total CPU consumed by the tasks in a cgroup.
683 config RESOURCE_COUNTERS
684 bool "Resource counters"
686 This option enables controller independent resource accounting
687 infrastructure that works with cgroups.
690 bool "Memory Resource Controller for Control Groups"
691 depends on RESOURCE_COUNTERS
694 Provides a memory resource controller that manages both anonymous
695 memory and page cache. (See Documentation/cgroups/memory.txt)
697 Note that setting this option increases fixed memory overhead
698 associated with each page of memory in the system. By this,
699 20(40)bytes/PAGE_SIZE on 32(64)bit system will be occupied by memory
700 usage tracking struct at boot. Total amount of this is printed out
703 Only enable when you're ok with these trade offs and really
704 sure you need the memory resource controller. Even when you enable
705 this, you can set "cgroup_disable=memory" at your boot option to
706 disable memory resource controller and you can avoid overheads.
707 (and lose benefits of memory resource controller)
709 This config option also selects MM_OWNER config option, which
710 could in turn add some fork/exit overhead.
713 bool "Memory Resource Controller Swap Extension"
714 depends on MEMCG && SWAP
716 Add swap management feature to memory resource controller. When you
717 enable this, you can limit mem+swap usage per cgroup. In other words,
718 when you disable this, memory resource controller has no cares to
719 usage of swap...a process can exhaust all of the swap. This extension
720 is useful when you want to avoid exhaustion swap but this itself
721 adds more overheads and consumes memory for remembering information.
722 Especially if you use 32bit system or small memory system, please
723 be careful about enabling this. When memory resource controller
724 is disabled by boot option, this will be automatically disabled and
725 there will be no overhead from this. Even when you set this config=y,
726 if boot option "swapaccount=0" is set, swap will not be accounted.
727 Now, memory usage of swap_cgroup is 2 bytes per entry. If swap page
728 size is 4096bytes, 512k per 1Gbytes of swap.
729 config MEMCG_SWAP_ENABLED
730 bool "Memory Resource Controller Swap Extension enabled by default"
731 depends on MEMCG_SWAP
734 Memory Resource Controller Swap Extension comes with its price in
735 a bigger memory consumption. General purpose distribution kernels
736 which want to enable the feature but keep it disabled by default
737 and let the user enable it by swapaccount boot command line
738 parameter should have this option unselected.
739 For those who want to have the feature enabled by default should
740 select this option (if, for some reason, they need to disable it
741 then swapaccount=0 does the trick).
743 bool "Memory Resource Controller Kernel Memory accounting (EXPERIMENTAL)"
744 depends on MEMCG && EXPERIMENTAL
747 The Kernel Memory extension for Memory Resource Controller can limit
748 the amount of memory used by kernel objects in the system. Those are
749 fundamentally different from the entities handled by the standard
750 Memory Controller, which are page-based, and can be swapped. Users of
751 the kmem extension can use it to guarantee that no group of processes
752 will ever exhaust kernel resources alone.
754 config CGROUP_HUGETLB
755 bool "HugeTLB Resource Controller for Control Groups"
756 depends on RESOURCE_COUNTERS && HUGETLB_PAGE && EXPERIMENTAL
759 Provides a cgroup Resource Controller for HugeTLB pages.
760 When you enable this, you can put a per cgroup limit on HugeTLB usage.
761 The limit is enforced during page fault. Since HugeTLB doesn't
762 support page reclaim, enforcing the limit at page fault time implies
763 that, the application will get SIGBUS signal if it tries to access
764 HugeTLB pages beyond its limit. This requires the application to know
765 beforehand how much HugeTLB pages it would require for its use. The
766 control group is tracked in the third page lru pointer. This means
767 that we cannot use the controller with huge page less than 3 pages.
770 bool "Enable perf_event per-cpu per-container group (cgroup) monitoring"
771 depends on PERF_EVENTS && CGROUPS
773 This option extends the per-cpu mode to restrict monitoring to
774 threads which belong to the cgroup specified and run on the
779 menuconfig CGROUP_SCHED
780 bool "Group CPU scheduler"
783 This feature lets CPU scheduler recognize task groups and control CPU
784 bandwidth allocation to such task groups. It uses cgroups to group
788 config FAIR_GROUP_SCHED
789 bool "Group scheduling for SCHED_OTHER"
790 depends on CGROUP_SCHED
794 bool "CPU bandwidth provisioning for FAIR_GROUP_SCHED"
795 depends on EXPERIMENTAL
796 depends on FAIR_GROUP_SCHED
799 This option allows users to define CPU bandwidth rates (limits) for
800 tasks running within the fair group scheduler. Groups with no limit
801 set are considered to be unconstrained and will run with no
803 See tip/Documentation/scheduler/sched-bwc.txt for more information.
805 config RT_GROUP_SCHED
806 bool "Group scheduling for SCHED_RR/FIFO"
807 depends on EXPERIMENTAL
808 depends on CGROUP_SCHED
811 This feature lets you explicitly allocate real CPU bandwidth
812 to task groups. If enabled, it will also make it impossible to
813 schedule realtime tasks for non-root users until you allocate
814 realtime bandwidth for them.
815 See Documentation/scheduler/sched-rt-group.txt for more information.
820 bool "Block IO controller"
824 Generic block IO controller cgroup interface. This is the common
825 cgroup interface which should be used by various IO controlling
828 Currently, CFQ IO scheduler uses it to recognize task groups and
829 control disk bandwidth allocation (proportional time slice allocation)
830 to such task groups. It is also used by bio throttling logic in
831 block layer to implement upper limit in IO rates on a device.
833 This option only enables generic Block IO controller infrastructure.
834 One needs to also enable actual IO controlling logic/policy. For
835 enabling proportional weight division of disk bandwidth in CFQ, set
836 CONFIG_CFQ_GROUP_IOSCHED=y; for enabling throttling policy, set
837 CONFIG_BLK_DEV_THROTTLING=y.
839 See Documentation/cgroups/blkio-controller.txt for more information.
841 config DEBUG_BLK_CGROUP
842 bool "Enable Block IO controller debugging"
843 depends on BLK_CGROUP
846 Enable some debugging help. Currently it exports additional stat
847 files in a cgroup which can be useful for debugging.
851 config CHECKPOINT_RESTORE
852 bool "Checkpoint/restore support" if EXPERT
855 Enables additional kernel features in a sake of checkpoint/restore.
856 In particular it adds auxiliary prctl codes to setup process text,
857 data and heap segment sizes, and a few additional /proc filesystem
860 If unsure, say N here.
862 menuconfig NAMESPACES
863 bool "Namespaces support" if EXPERT
866 Provides the way to make tasks work with different objects using
867 the same id. For example same IPC id may refer to different objects
868 or same user id or pid may refer to different tasks when used in
869 different namespaces.
877 In this namespace tasks see different info provided with the
882 depends on (SYSVIPC || POSIX_MQUEUE)
885 In this namespace tasks work with IPC ids which correspond to
886 different IPC objects in different namespaces.
889 bool "User namespace (EXPERIMENTAL)"
890 depends on EXPERIMENTAL
891 depends on UIDGID_CONVERTED
892 select UIDGID_STRICT_TYPE_CHECKS
896 This allows containers, i.e. vservers, to use user namespaces
897 to provide different user info for different servers.
901 bool "PID Namespaces"
904 Support process id namespaces. This allows having multiple
905 processes with the same pid as long as they are in different
906 pid namespaces. This is a building block of containers.
909 bool "Network namespace"
913 Allow user space to create what appear to be multiple instances
914 of the network stack.
918 config UIDGID_CONVERTED
919 # True if all of the selected software conmponents are known
920 # to have uid_t and gid_t converted to kuid_t and kgid_t
921 # where appropriate and are otherwise safe to use with
922 # the user namespace.
926 # List of kernel pieces that need user namespace work
932 depends on AUDITSYSCALL = n
933 depends on TASKSTATS = n
934 depends on TRACING = n
935 depends on FS_POSIX_ACL = n
937 depends on QUOTACTL = n
938 depends on BSD_PROCESS_ACCT = n
942 depends on NET_9P = n
943 depends on AF_RXRPC = n
944 depends on DNS_RESOLVER = n
947 depends on USB_GADGETFS = n
948 depends on USB_FUNCTIONFS = n
949 depends on DEVTMPFS = n
953 depends on ADFS_FS = n
954 depends on AFFS_FS = n
955 depends on AFS_FS = n
956 depends on AUTOFS4_FS = n
957 depends on BEFS_FS = n
958 depends on BFS_FS = n
959 depends on BTRFS_FS = n
960 depends on CEPH_FS = n
962 depends on CODA_FS = n
963 depends on CONFIGFS_FS = n
964 depends on CRAMFS = n
965 depends on ECRYPT_FS = n
966 depends on EFS_FS = n
967 depends on EXOFS_FS = n
968 depends on FAT_FS = n
969 depends on FUSE_FS = n
970 depends on GFS2_FS = n
971 depends on HFS_FS = n
972 depends on HFSPLUS_FS = n
973 depends on HPFS_FS = n
974 depends on HUGETLBFS = n
975 depends on ISO9660_FS = n
976 depends on JFFS2_FS = n
977 depends on JFS_FS = n
979 depends on MINIX_FS = n
980 depends on NCP_FS = n
982 depends on NFS_FS = n
983 depends on NILFS2_FS = n
984 depends on NTFS_FS = n
985 depends on OCFS2_FS = n
986 depends on OMFS_FS = n
987 depends on QNX4FS_FS = n
988 depends on QNX6FS_FS = n
989 depends on REISERFS_FS = n
990 depends on SQUASHFS = n
991 depends on SYSV_FS = n
992 depends on UBIFS_FS = n
993 depends on UDF_FS = n
994 depends on UFS_FS = n
995 depends on VXFS_FS = n
996 depends on XFS_FS = n
998 depends on !UML || HOSTFS = n
1000 # The rare drivers that won't build
1001 depends on INFINIBAND_QIB = n
1002 depends on BLK_DEV_LOOP = n
1003 depends on ANDROID_BINDER_IPC = n
1006 depends on SECURITY_TOMOYO = n
1007 depends on SECURITY_APPARMOR = n
1009 config UIDGID_STRICT_TYPE_CHECKS
1010 bool "Require conversions between uid/gids and their internal representation"
1011 depends on UIDGID_CONVERTED
1014 While the nececessary conversions are being added to all subsystems this option allows
1015 the code to continue to build for unconverted subsystems.
1017 Say Y here if you want the strict type checking enabled
1019 config SCHED_AUTOGROUP
1020 bool "Automatic process group scheduling"
1024 select FAIR_GROUP_SCHED
1026 This option optimizes the scheduler for common desktop workloads by
1027 automatically creating and populating task groups. This separation
1028 of workloads isolates aggressive CPU burners (like build jobs) from
1029 desktop applications. Task group autogeneration is currently based
1035 config SYSFS_DEPRECATED
1036 bool "Enable deprecated sysfs features to support old userspace tools"
1040 This option adds code that switches the layout of the "block" class
1041 devices, to not show up in /sys/class/block/, but only in
1044 This switch is only active when the sysfs.deprecated=1 boot option is
1045 passed or the SYSFS_DEPRECATED_V2 option is set.
1047 This option allows new kernels to run on old distributions and tools,
1048 which might get confused by /sys/class/block/. Since 2007/2008 all
1049 major distributions and tools handle this just fine.
1051 Recent distributions and userspace tools after 2009/2010 depend on
1052 the existence of /sys/class/block/, and will not work with this
1055 Only if you are using a new kernel on an old distribution, you might
1058 config SYSFS_DEPRECATED_V2
1059 bool "Enable deprecated sysfs features by default"
1062 depends on SYSFS_DEPRECATED
1064 Enable deprecated sysfs by default.
1066 See the CONFIG_SYSFS_DEPRECATED option for more details about this
1069 Only if you are using a new kernel on an old distribution, you might
1070 need to say Y here. Even then, odds are you would not need it
1071 enabled, you can always pass the boot option if absolutely necessary.
1074 bool "Kernel->user space relay support (formerly relayfs)"
1076 This option enables support for relay interface support in
1077 certain file systems (such as debugfs).
1078 It is designed to provide an efficient mechanism for tools and
1079 facilities to relay large amounts of data from kernel space to
1084 config BLK_DEV_INITRD
1085 bool "Initial RAM filesystem and RAM disk (initramfs/initrd) support"
1086 depends on BROKEN || !FRV
1088 The initial RAM filesystem is a ramfs which is loaded by the
1089 boot loader (loadlin or lilo) and that is mounted as root
1090 before the normal boot procedure. It is typically used to
1091 load modules needed to mount the "real" root file system,
1092 etc. See <file:Documentation/initrd.txt> for details.
1094 If RAM disk support (BLK_DEV_RAM) is also included, this
1095 also enables initial RAM disk (initrd) support and adds
1096 15 Kbytes (more on some other architectures) to the kernel size.
1102 source "usr/Kconfig"
1106 config CC_OPTIMIZE_FOR_SIZE
1107 bool "Optimize for size"
1109 Enabling this option will pass "-Os" instead of "-O2" to gcc
1110 resulting in a smaller kernel.
1121 bool "Configure standard kernel features (expert users)"
1122 # Unhide debug options, to make the on-by-default options visible
1125 This option allows certain base kernel options and settings
1126 to be disabled or tweaked. This is for specialized
1127 environments which can tolerate a "non-standard" kernel.
1128 Only use this if you really know what you are doing.
1131 bool "Enable 16-bit UID system calls" if EXPERT
1132 depends on ARM || BLACKFIN || CRIS || FRV || H8300 || X86_32 || M68K || (S390 && !64BIT) || SUPERH || SPARC32 || (SPARC64 && COMPAT) || UML || (X86_64 && IA32_EMULATION)
1135 This enables the legacy 16-bit UID syscall wrappers.
1137 config SYSCTL_SYSCALL
1138 bool "Sysctl syscall support" if EXPERT
1139 depends on PROC_SYSCTL
1143 sys_sysctl uses binary paths that have been found challenging
1144 to properly maintain and use. The interface in /proc/sys
1145 using paths with ascii names is now the primary path to this
1148 Almost nothing using the binary sysctl interface so if you are
1149 trying to save some space it is probably safe to disable this,
1150 making your kernel marginally smaller.
1152 If unsure say N here.
1155 bool "Load all symbols for debugging/ksymoops" if EXPERT
1158 Say Y here to let the kernel print out symbolic crash information and
1159 symbolic stack backtraces. This increases the size of the kernel
1160 somewhat, as all symbols have to be loaded into the kernel image.
1163 bool "Include all symbols in kallsyms"
1164 depends on DEBUG_KERNEL && KALLSYMS
1166 Normally kallsyms only contains the symbols of functions for nicer
1167 OOPS messages and backtraces (i.e., symbols from the text and inittext
1168 sections). This is sufficient for most cases. And only in very rare
1169 cases (e.g., when a debugger is used) all symbols are required (e.g.,
1170 names of variables from the data sections, etc).
1172 This option makes sure that all symbols are loaded into the kernel
1173 image (i.e., symbols from all sections) in cost of increased kernel
1174 size (depending on the kernel configuration, it may be 300KiB or
1175 something like this).
1177 Say N unless you really need all symbols.
1180 bool "Support for hot-pluggable devices" if EXPERT
1183 This option is provided for the case where no hotplug or uevent
1184 capabilities is wanted by the kernel. You should only consider
1185 disabling this option for embedded systems that do not use modules, a
1186 dynamic /dev tree, or dynamic device discovery. Just say Y.
1190 bool "Enable support for printk" if EXPERT
1192 This option enables normal printk support. Removing it
1193 eliminates most of the message strings from the kernel image
1194 and makes the kernel more or less silent. As this makes it
1195 very difficult to diagnose system problems, saying N here is
1196 strongly discouraged.
1199 bool "BUG() support" if EXPERT
1202 Disabling this option eliminates support for BUG and WARN, reducing
1203 the size of your kernel image and potentially quietly ignoring
1204 numerous fatal conditions. You should only consider disabling this
1205 option for embedded systems with no facilities for reporting errors.
1210 bool "Enable ELF core dumps" if EXPERT
1212 Enable support for generating core dumps. Disabling saves about 4k.
1215 config PCSPKR_PLATFORM
1216 bool "Enable PC-Speaker support" if EXPERT
1217 depends on HAVE_PCSPKR_PLATFORM
1221 This option allows to disable the internal PC-Speaker
1222 support, saving some memory.
1224 config HAVE_PCSPKR_PLATFORM
1229 bool "Enable full-sized data structures for core" if EXPERT
1231 Disabling this option reduces the size of miscellaneous core
1232 kernel data structures. This saves memory on small machines,
1233 but may reduce performance.
1236 bool "Enable futex support" if EXPERT
1240 Disabling this option will cause the kernel to be built without
1241 support for "fast userspace mutexes". The resulting kernel may not
1242 run glibc-based applications correctly.
1245 bool "Enable eventpoll support" if EXPERT
1249 Disabling this option will cause the kernel to be built without
1250 support for epoll family of system calls.
1253 bool "Enable signalfd() system call" if EXPERT
1257 Enable the signalfd() system call that allows to receive signals
1258 on a file descriptor.
1263 bool "Enable timerfd() system call" if EXPERT
1267 Enable the timerfd() system call that allows to receive timer
1268 events on a file descriptor.
1273 bool "Enable eventfd() system call" if EXPERT
1277 Enable the eventfd() system call that allows to receive both
1278 kernel notification (ie. KAIO) or userspace notifications.
1283 bool "Use full shmem filesystem" if EXPERT
1287 The shmem is an internal filesystem used to manage shared memory.
1288 It is backed by swap and manages resource limits. It is also exported
1289 to userspace as tmpfs if TMPFS is enabled. Disabling this
1290 option replaces shmem and tmpfs with the much simpler ramfs code,
1291 which may be appropriate on small systems without swap.
1294 bool "Enable AIO support" if EXPERT
1297 This option enables POSIX asynchronous I/O which may by used
1298 by some high performance threaded applications. Disabling
1299 this option saves about 7k.
1302 bool "Embedded system"
1305 This option should be enabled if compiling the kernel for
1306 an embedded system so certain expert options are available
1309 config HAVE_PERF_EVENTS
1312 See tools/perf/design.txt for details.
1314 config PERF_USE_VMALLOC
1317 See tools/perf/design.txt for details
1319 menu "Kernel Performance Events And Counters"
1322 bool "Kernel performance events and counters"
1323 default y if PROFILING
1324 depends on HAVE_PERF_EVENTS
1328 Enable kernel support for various performance events provided
1329 by software and hardware.
1331 Software events are supported either built-in or via the
1332 use of generic tracepoints.
1334 Most modern CPUs support performance events via performance
1335 counter registers. These registers count the number of certain
1336 types of hw events: such as instructions executed, cachemisses
1337 suffered, or branches mis-predicted - without slowing down the
1338 kernel or applications. These registers can also trigger interrupts
1339 when a threshold number of events have passed - and can thus be
1340 used to profile the code that runs on that CPU.
1342 The Linux Performance Event subsystem provides an abstraction of
1343 these software and hardware event capabilities, available via a
1344 system call and used by the "perf" utility in tools/perf/. It
1345 provides per task and per CPU counters, and it provides event
1346 capabilities on top of those.
1350 config DEBUG_PERF_USE_VMALLOC
1352 bool "Debug: use vmalloc to back perf mmap() buffers"
1353 depends on PERF_EVENTS && DEBUG_KERNEL
1354 select PERF_USE_VMALLOC
1356 Use vmalloc memory to back perf mmap() buffers.
1358 Mostly useful for debugging the vmalloc code on platforms
1359 that don't require it.
1365 config VM_EVENT_COUNTERS
1367 bool "Enable VM event counters for /proc/vmstat" if EXPERT
1369 VM event counters are needed for event counts to be shown.
1370 This option allows the disabling of the VM event counters
1371 on EXPERT systems. /proc/vmstat will only show page counts
1372 if VM event counters are disabled.
1376 bool "Enable PCI quirk workarounds" if EXPERT
1379 This enables workarounds for various PCI chipset
1380 bugs/quirks. Disable this only if your target machine is
1381 unaffected by PCI quirks.
1385 bool "Enable SLUB debugging support" if EXPERT
1386 depends on SLUB && SYSFS
1388 SLUB has extensive debug support features. Disabling these can
1389 result in significant savings in code size. This also disables
1390 SLUB sysfs support. /sys/slab will not exist and there will be
1391 no support for cache validation etc.
1394 bool "Disable heap randomization"
1397 Randomizing heap placement makes heap exploits harder, but it
1398 also breaks ancient binaries (including anything libc5 based).
1399 This option changes the bootup default to heap randomization
1400 disabled, and can be overridden at runtime by setting
1401 /proc/sys/kernel/randomize_va_space to 2.
1403 On non-ancient distros (post-2000 ones) N is usually a safe choice.
1406 prompt "Choose SLAB allocator"
1409 This option allows to select a slab allocator.
1414 The regular slab allocator that is established and known to work
1415 well in all environments. It organizes cache hot objects in
1416 per cpu and per node queues.
1419 bool "SLUB (Unqueued Allocator)"
1421 SLUB is a slab allocator that minimizes cache line usage
1422 instead of managing queues of cached objects (SLAB approach).
1423 Per cpu caching is realized using slabs of objects instead
1424 of queues of objects. SLUB can use memory efficiently
1425 and has enhanced diagnostics. SLUB is the default choice for
1430 bool "SLOB (Simple Allocator)"
1432 SLOB replaces the stock allocator with a drastically simpler
1433 allocator. SLOB is generally more space efficient but
1434 does not perform as well on large systems.
1438 config MMAP_ALLOW_UNINITIALIZED
1439 bool "Allow mmapped anonymous memory to be uninitialized"
1440 depends on EXPERT && !MMU
1443 Normally, and according to the Linux spec, anonymous memory obtained
1444 from mmap() has it's contents cleared before it is passed to
1445 userspace. Enabling this config option allows you to request that
1446 mmap() skip that if it is given an MAP_UNINITIALIZED flag, thus
1447 providing a huge performance boost. If this option is not enabled,
1448 then the flag will be ignored.
1450 This is taken advantage of by uClibc's malloc(), and also by
1451 ELF-FDPIC binfmt's brk and stack allocator.
1453 Because of the obvious security issues, this option should only be
1454 enabled on embedded devices where you control what is run in
1455 userspace. Since that isn't generally a problem on no-MMU systems,
1456 it is normally safe to say Y here.
1458 See Documentation/nommu-mmap.txt for more information.
1461 bool "Profiling support"
1463 Say Y here to enable the extended profiling support mechanisms used
1464 by profilers such as OProfile.
1467 # Place an empty function call at each tracepoint site. Can be
1468 # dynamically changed for a probe function.
1473 source "arch/Kconfig"
1475 endmenu # General setup
1477 config HAVE_GENERIC_DMA_COHERENT
1484 depends on SLAB || SLUB_DEBUG
1492 default 0 if BASE_FULL
1493 default 1 if !BASE_FULL
1496 bool "Enable loadable module support"
1498 Kernel modules are small pieces of compiled code which can
1499 be inserted in the running kernel, rather than being
1500 permanently built into the kernel. You use the "modprobe"
1501 tool to add (and sometimes remove) them. If you say Y here,
1502 many parts of the kernel can be built as modules (by
1503 answering M instead of Y where indicated): this is most
1504 useful for infrequently used options which are not required
1505 for booting. For more information, see the man pages for
1506 modprobe, lsmod, modinfo, insmod and rmmod.
1508 If you say Y here, you will need to run "make
1509 modules_install" to put the modules under /lib/modules/
1510 where modprobe can find them (you may need to be root to do
1517 config MODULE_FORCE_LOAD
1518 bool "Forced module loading"
1521 Allow loading of modules without version information (ie. modprobe
1522 --force). Forced module loading sets the 'F' (forced) taint flag and
1523 is usually a really bad idea.
1525 config MODULE_UNLOAD
1526 bool "Module unloading"
1528 Without this option you will not be able to unload any
1529 modules (note that some modules may not be unloadable
1530 anyway), which makes your kernel smaller, faster
1531 and simpler. If unsure, say Y.
1533 config MODULE_FORCE_UNLOAD
1534 bool "Forced module unloading"
1535 depends on MODULE_UNLOAD && EXPERIMENTAL
1537 This option allows you to force a module to unload, even if the
1538 kernel believes it is unsafe: the kernel will remove the module
1539 without waiting for anyone to stop using it (using the -f option to
1540 rmmod). This is mainly for kernel developers and desperate users.
1544 bool "Module versioning support"
1546 Usually, you have to use modules compiled with your kernel.
1547 Saying Y here makes it sometimes possible to use modules
1548 compiled for different kernels, by adding enough information
1549 to the modules to (hopefully) spot any changes which would
1550 make them incompatible with the kernel you are running. If
1553 config MODULE_SRCVERSION_ALL
1554 bool "Source checksum for all modules"
1556 Modules which contain a MODULE_VERSION get an extra "srcversion"
1557 field inserted into their modinfo section, which contains a
1558 sum of the source files which made it. This helps maintainers
1559 see exactly which source was used to build a module (since
1560 others sometimes change the module source without updating
1561 the version). With this option, such a "srcversion" field
1562 will be created for all modules. If unsure, say N.
1566 config INIT_ALL_POSSIBLE
1569 Back when each arch used to define their own cpu_online_mask and
1570 cpu_possible_mask, some of them chose to initialize cpu_possible_mask
1571 with all 1s, and others with all 0s. When they were centralised,
1572 it was better to provide this option than to break all the archs
1573 and have several arch maintainers pursuing me down dark alleys.
1578 depends on (SMP && MODULE_UNLOAD) || HOTPLUG_CPU
1580 Need stop_machine() primitive.
1582 source "block/Kconfig"
1584 config PREEMPT_NOTIFIERS
1591 source "kernel/Kconfig.locks"