7 option env="KERNELVERSION"
13 default "/lib/modules/$UNAME_RELEASE/.config"
14 default "/etc/kernel-config"
15 default "/boot/config-$UNAME_RELEASE"
16 default "$ARCH_DEFCONFIG"
17 default "arch/$ARCH/defconfig"
26 config BUILDTIME_EXTABLE_SORT
29 config THREAD_INFO_IN_TASK
32 Select this to move thread_info off the stack into task_struct. To
33 make this work, an arch will need to remove all thread_info fields
34 except flags and fix any runtime bugs.
36 One subtle change that will be needed is to use try_get_task_stack()
37 and put_task_stack() in save_thread_stack_tsk() and get_wchan().
46 depends on BROKEN || !SMP
49 config INIT_ENV_ARG_LIMIT
54 Maximum of each of the number of arguments and environment
55 variables passed to init from the kernel command line.
59 string "Cross-compiler tool prefix"
61 Same as running 'make CROSS_COMPILE=prefix-' but stored for
62 default make runs in this kernel build directory. You don't
63 need to set this unless you want the configured kernel build
64 directory to select the cross-compiler automatically.
67 bool "Compile also drivers which will not load"
71 Some drivers can be compiled on a different platform than they are
72 intended to be run on. Despite they cannot be loaded there (or even
73 when they load they cannot be used due to missing HW support),
74 developers still, opposing to distributors, might want to build such
75 drivers to compile-test them.
77 If you are a developer and want to build everything available, say Y
78 here. If you are a user/distributor, say N here to exclude useless
79 drivers to be distributed.
82 string "Local version - append to kernel release"
84 Append an extra string to the end of your kernel version.
85 This will show up when you type uname, for example.
86 The string you set here will be appended after the contents of
87 any files with a filename matching localversion* in your
88 object and source tree, in that order. Your total string can
89 be a maximum of 64 characters.
91 config LOCALVERSION_AUTO
92 bool "Automatically append version information to the version string"
94 depends on !COMPILE_TEST
96 This will try to automatically determine if the current tree is a
97 release tree by looking for git tags that belong to the current
100 A string of the format -gxxxxxxxx will be added to the localversion
101 if a git-based tree is found. The string generated by this will be
102 appended after any matching localversion* files, and after the value
103 set in CONFIG_LOCALVERSION.
105 (The actual string used here is the first eight characters produced
106 by running the command:
108 $ git rev-parse --verify HEAD
110 which is done within the script "scripts/setlocalversion".)
112 config HAVE_KERNEL_GZIP
115 config HAVE_KERNEL_BZIP2
118 config HAVE_KERNEL_LZMA
121 config HAVE_KERNEL_XZ
124 config HAVE_KERNEL_LZO
127 config HAVE_KERNEL_LZ4
131 prompt "Kernel compression mode"
133 depends on HAVE_KERNEL_GZIP || HAVE_KERNEL_BZIP2 || HAVE_KERNEL_LZMA || HAVE_KERNEL_XZ || HAVE_KERNEL_LZO || HAVE_KERNEL_LZ4
135 The linux kernel is a kind of self-extracting executable.
136 Several compression algorithms are available, which differ
137 in efficiency, compression and decompression speed.
138 Compression speed is only relevant when building a kernel.
139 Decompression speed is relevant at each boot.
141 If you have any problems with bzip2 or lzma compressed
142 kernels, mail me (Alain Knaff) <alain@knaff.lu>. (An older
143 version of this functionality (bzip2 only), for 2.4, was
144 supplied by Christian Ludwig)
146 High compression options are mostly useful for users, who
147 are low on disk space (embedded systems), but for whom ram
150 If in doubt, select 'gzip'
154 depends on HAVE_KERNEL_GZIP
156 The old and tried gzip compression. It provides a good balance
157 between compression ratio and decompression speed.
161 depends on HAVE_KERNEL_BZIP2
163 Its compression ratio and speed is intermediate.
164 Decompression speed is slowest among the choices. The kernel
165 size is about 10% smaller with bzip2, in comparison to gzip.
166 Bzip2 uses a large amount of memory. For modern kernels you
167 will need at least 8MB RAM or more for booting.
171 depends on HAVE_KERNEL_LZMA
173 This compression algorithm's ratio is best. Decompression speed
174 is between gzip and bzip2. Compression is slowest.
175 The kernel size is about 33% smaller with LZMA in comparison to gzip.
179 depends on HAVE_KERNEL_XZ
181 XZ uses the LZMA2 algorithm and instruction set specific
182 BCJ filters which can improve compression ratio of executable
183 code. The size of the kernel is about 30% smaller with XZ in
184 comparison to gzip. On architectures for which there is a BCJ
185 filter (i386, x86_64, ARM, IA-64, PowerPC, and SPARC), XZ
186 will create a few percent smaller kernel than plain LZMA.
188 The speed is about the same as with LZMA: The decompression
189 speed of XZ is better than that of bzip2 but worse than gzip
190 and LZO. Compression is slow.
194 depends on HAVE_KERNEL_LZO
196 Its compression ratio is the poorest among the choices. The kernel
197 size is about 10% bigger than gzip; however its speed
198 (both compression and decompression) is the fastest.
202 depends on HAVE_KERNEL_LZ4
204 LZ4 is an LZ77-type compressor with a fixed, byte-oriented encoding.
205 A preliminary version of LZ4 de/compression tool is available at
206 <https://code.google.com/p/lz4/>.
208 Its compression ratio is worse than LZO. The size of the kernel
209 is about 8% bigger than LZO. But the decompression speed is
214 config DEFAULT_HOSTNAME
215 string "Default hostname"
218 This option determines the default system hostname before userspace
219 calls sethostname(2). The kernel traditionally uses "(none)" here,
220 but you may wish to use a different default here to make a minimal
221 system more usable with less configuration.
224 bool "Support for paging of anonymous memory (swap)"
225 depends on MMU && BLOCK
228 This option allows you to choose whether you want to have support
229 for so called swap devices or swap files in your kernel that are
230 used to provide more virtual memory than the actual RAM present
231 in your computer. If unsure say Y.
236 Inter Process Communication is a suite of library functions and
237 system calls which let processes (running programs) synchronize and
238 exchange information. It is generally considered to be a good thing,
239 and some programs won't run unless you say Y here. In particular, if
240 you want to run the DOS emulator dosemu under Linux (read the
241 DOSEMU-HOWTO, available from <http://www.tldp.org/docs.html#howto>),
242 you'll need to say Y here.
244 You can find documentation about IPC with "info ipc" and also in
245 section 6.4 of the Linux Programmer's Guide, available from
246 <http://www.tldp.org/guides.html>.
248 config SYSVIPC_SYSCTL
255 bool "POSIX Message Queues"
258 POSIX variant of message queues is a part of IPC. In POSIX message
259 queues every message has a priority which decides about succession
260 of receiving it by a process. If you want to compile and run
261 programs written e.g. for Solaris with use of its POSIX message
262 queues (functions mq_*) say Y here.
264 POSIX message queues are visible as a filesystem called 'mqueue'
265 and can be mounted somewhere if you want to do filesystem
266 operations on message queues.
270 config POSIX_MQUEUE_SYSCTL
272 depends on POSIX_MQUEUE
276 config CROSS_MEMORY_ATTACH
277 bool "Enable process_vm_readv/writev syscalls"
281 Enabling this option adds the system calls process_vm_readv and
282 process_vm_writev which allow a process with the correct privileges
283 to directly read from or write to another process' address space.
284 See the man page for more details.
287 bool "open by fhandle syscalls" if EXPERT
291 If you say Y here, a user level program will be able to map
292 file names to handle and then later use the handle for
293 different file system operations. This is useful in implementing
294 userspace file servers, which now track files using handles instead
295 of names. The handle would remain the same even if file names
296 get renamed. Enables open_by_handle_at(2) and name_to_handle_at(2)
300 bool "uselib syscall"
301 def_bool ALPHA || M68K || SPARC || X86_32 || IA32_EMULATION
303 This option enables the uselib syscall, a system call used in the
304 dynamic linker from libc5 and earlier. glibc does not use this
305 system call. If you intend to run programs built on libc5 or
306 earlier, you may need to enable this syscall. Current systems
307 running glibc can safely disable this.
310 bool "Auditing support"
313 Enable auditing infrastructure that can be used with another
314 kernel subsystem, such as SELinux (which requires this for
315 logging of avc messages output). System call auditing is included
316 on architectures which support it.
318 config HAVE_ARCH_AUDITSYSCALL
323 depends on AUDIT && HAVE_ARCH_AUDITSYSCALL
327 depends on AUDITSYSCALL
332 depends on AUDITSYSCALL
335 source "kernel/irq/Kconfig"
336 source "kernel/time/Kconfig"
338 menu "CPU/Task time and stats accounting"
340 config VIRT_CPU_ACCOUNTING
344 prompt "Cputime accounting"
345 default TICK_CPU_ACCOUNTING if !PPC64
346 default VIRT_CPU_ACCOUNTING_NATIVE if PPC64
348 # Kind of a stub config for the pure tick based cputime accounting
349 config TICK_CPU_ACCOUNTING
350 bool "Simple tick based cputime accounting"
351 depends on !S390 && !NO_HZ_FULL
353 This is the basic tick based cputime accounting that maintains
354 statistics about user, system and idle time spent on per jiffies
359 config VIRT_CPU_ACCOUNTING_NATIVE
360 bool "Deterministic task and CPU time accounting"
361 depends on HAVE_VIRT_CPU_ACCOUNTING && !NO_HZ_FULL
362 select VIRT_CPU_ACCOUNTING
364 Select this option to enable more accurate task and CPU time
365 accounting. This is done by reading a CPU counter on each
366 kernel entry and exit and on transitions within the kernel
367 between system, softirq and hardirq state, so there is a
368 small performance impact. In the case of s390 or IBM POWER > 5,
369 this also enables accounting of stolen time on logically-partitioned
372 config VIRT_CPU_ACCOUNTING_GEN
373 bool "Full dynticks CPU time accounting"
374 depends on HAVE_CONTEXT_TRACKING
375 depends on HAVE_VIRT_CPU_ACCOUNTING_GEN
376 select VIRT_CPU_ACCOUNTING
377 select CONTEXT_TRACKING
379 Select this option to enable task and CPU time accounting on full
380 dynticks systems. This accounting is implemented by watching every
381 kernel-user boundaries using the context tracking subsystem.
382 The accounting is thus performed at the expense of some significant
385 For now this is only useful if you are working on the full
386 dynticks subsystem development.
392 config IRQ_TIME_ACCOUNTING
393 bool "Fine granularity task level IRQ time accounting"
394 depends on HAVE_IRQ_TIME_ACCOUNTING && !VIRT_CPU_ACCOUNTING_NATIVE
396 Select this option to enable fine granularity task irq time
397 accounting. This is done by reading a timestamp on each
398 transitions between softirq and hardirq state, so there can be a
399 small performance impact.
401 If in doubt, say N here.
403 config BSD_PROCESS_ACCT
404 bool "BSD Process Accounting"
407 If you say Y here, a user level program will be able to instruct the
408 kernel (via a special system call) to write process accounting
409 information to a file: whenever a process exits, information about
410 that process will be appended to the file by the kernel. The
411 information includes things such as creation time, owning user,
412 command name, memory usage, controlling terminal etc. (the complete
413 list is in the struct acct in <file:include/linux/acct.h>). It is
414 up to the user level program to do useful things with this
415 information. This is generally a good idea, so say Y.
417 config BSD_PROCESS_ACCT_V3
418 bool "BSD Process Accounting version 3 file format"
419 depends on BSD_PROCESS_ACCT
422 If you say Y here, the process accounting information is written
423 in a new file format that also logs the process IDs of each
424 process and it's parent. Note that this file format is incompatible
425 with previous v0/v1/v2 file formats, so you will need updated tools
426 for processing it. A preliminary version of these tools is available
427 at <http://www.gnu.org/software/acct/>.
430 bool "Export task/process statistics through netlink"
435 Export selected statistics for tasks/processes through the
436 generic netlink interface. Unlike BSD process accounting, the
437 statistics are available during the lifetime of tasks/processes as
438 responses to commands. Like BSD accounting, they are sent to user
443 config TASK_DELAY_ACCT
444 bool "Enable per-task delay accounting"
448 Collect information on time spent by a task waiting for system
449 resources like cpu, synchronous block I/O completion and swapping
450 in pages. Such statistics can help in setting a task's priorities
451 relative to other tasks for cpu, io, rss limits etc.
456 bool "Enable extended accounting over taskstats"
459 Collect extended task accounting data and send the data
460 to userland for processing over the taskstats interface.
464 config TASK_IO_ACCOUNTING
465 bool "Enable per-task storage I/O accounting"
466 depends on TASK_XACCT
468 Collect information on the number of bytes of storage I/O which this
473 endmenu # "CPU/Task time and stats accounting"
479 default y if !PREEMPT && SMP
481 This option selects the RCU implementation that is
482 designed for very large SMP system with hundreds or
483 thousands of CPUs. It also scales down nicely to
490 This option selects the RCU implementation that is
491 designed for very large SMP systems with hundreds or
492 thousands of CPUs, but for which real-time response
493 is also required. It also scales down nicely to
496 Select this option if you are unsure.
500 default y if !PREEMPT && !SMP
502 This option selects the RCU implementation that is
503 designed for UP systems from which real-time response
504 is not required. This option greatly reduces the
505 memory footprint of RCU.
508 bool "Make expert-level adjustments to RCU configuration"
511 This option needs to be enabled if you wish to make
512 expert-level adjustments to RCU configuration. By default,
513 no such adjustments can be made, which has the often-beneficial
514 side-effect of preventing "make oldconfig" from asking you all
515 sorts of detailed questions about how you would like numerous
516 obscure RCU options to be set up.
518 Say Y if you need to make expert-level adjustments to RCU.
520 Say N if you are unsure.
525 This option selects the sleepable version of RCU. This version
526 permits arbitrary sleeping or blocking within RCU read-side critical
535 This option enables a task-based RCU implementation that uses
536 only voluntary context switch (not preemption!), idle, and
537 user-mode execution as quiescent states.
539 config RCU_STALL_COMMON
540 def_bool ( TREE_RCU || PREEMPT_RCU || RCU_TRACE )
542 This option enables RCU CPU stall code that is common between
543 the TINY and TREE variants of RCU. The purpose is to allow
544 the tiny variants to disable RCU CPU stall warnings, while
545 making these warnings mandatory for the tree variants.
547 config CONTEXT_TRACKING
550 config CONTEXT_TRACKING_FORCE
551 bool "Force context tracking"
552 depends on CONTEXT_TRACKING
553 default y if !NO_HZ_FULL
555 The major pre-requirement for full dynticks to work is to
556 support the context tracking subsystem. But there are also
557 other dependencies to provide in order to make the full
560 This option stands for testing when an arch implements the
561 context tracking backend but doesn't yet fullfill all the
562 requirements to make the full dynticks feature working.
563 Without the full dynticks, there is no way to test the support
564 for context tracking and the subsystems that rely on it: RCU
565 userspace extended quiescent state and tickless cputime
566 accounting. This option copes with the absence of the full
567 dynticks subsystem by forcing the context tracking on all
570 Say Y only if you're working on the development of an
571 architecture backend for the context tracking.
573 Say N otherwise, this option brings an overhead that you
574 don't want in production.
578 int "Tree-based hierarchical RCU fanout value"
581 depends on (TREE_RCU || PREEMPT_RCU) && RCU_EXPERT
585 This option controls the fanout of hierarchical implementations
586 of RCU, allowing RCU to work efficiently on machines with
587 large numbers of CPUs. This value must be at least the fourth
588 root of NR_CPUS, which allows NR_CPUS to be insanely large.
589 The default value of RCU_FANOUT should be used for production
590 systems, but if you are stress-testing the RCU implementation
591 itself, small RCU_FANOUT values allow you to test large-system
592 code paths on small(er) systems.
594 Select a specific number if testing RCU itself.
595 Take the default if unsure.
597 config RCU_FANOUT_LEAF
598 int "Tree-based hierarchical RCU leaf-level fanout value"
601 depends on (TREE_RCU || PREEMPT_RCU) && RCU_EXPERT
604 This option controls the leaf-level fanout of hierarchical
605 implementations of RCU, and allows trading off cache misses
606 against lock contention. Systems that synchronize their
607 scheduling-clock interrupts for energy-efficiency reasons will
608 want the default because the smaller leaf-level fanout keeps
609 lock contention levels acceptably low. Very large systems
610 (hundreds or thousands of CPUs) will instead want to set this
611 value to the maximum value possible in order to reduce the
612 number of cache misses incurred during RCU's grace-period
613 initialization. These systems tend to run CPU-bound, and thus
614 are not helped by synchronized interrupts, and thus tend to
615 skew them, which reduces lock contention enough that large
616 leaf-level fanouts work well.
618 Select a specific number if testing RCU itself.
620 Select the maximum permissible value for large systems.
622 Take the default if unsure.
624 config RCU_FAST_NO_HZ
625 bool "Accelerate last non-dyntick-idle CPU's grace periods"
626 depends on NO_HZ_COMMON && SMP && RCU_EXPERT
629 This option permits CPUs to enter dynticks-idle state even if
630 they have RCU callbacks queued, and prevents RCU from waking
631 these CPUs up more than roughly once every four jiffies (by
632 default, you can adjust this using the rcutree.rcu_idle_gp_delay
633 parameter), thus improving energy efficiency. On the other
634 hand, this option increases the duration of RCU grace periods,
635 for example, slowing down synchronize_rcu().
637 Say Y if energy efficiency is critically important, and you
638 don't care about increased grace-period durations.
640 Say N if you are unsure.
642 config TREE_RCU_TRACE
643 def_bool RCU_TRACE && ( TREE_RCU || PREEMPT_RCU )
646 This option provides tracing for the TREE_RCU and
647 PREEMPT_RCU implementations, permitting Makefile to
648 trivially select kernel/rcutree_trace.c.
651 bool "Enable RCU priority boosting"
652 depends on RT_MUTEXES && PREEMPT_RCU && RCU_EXPERT
655 This option boosts the priority of preempted RCU readers that
656 block the current preemptible RCU grace period for too long.
657 This option also prevents heavy loads from blocking RCU
658 callback invocation for all flavors of RCU.
660 Say Y here if you are working with real-time apps or heavy loads
661 Say N here if you are unsure.
663 config RCU_KTHREAD_PRIO
664 int "Real-time priority to use for RCU worker threads"
665 range 1 99 if RCU_BOOST
666 range 0 99 if !RCU_BOOST
667 default 1 if RCU_BOOST
668 default 0 if !RCU_BOOST
669 depends on RCU_EXPERT
671 This option specifies the SCHED_FIFO priority value that will be
672 assigned to the rcuc/n and rcub/n threads and is also the value
673 used for RCU_BOOST (if enabled). If you are working with a
674 real-time application that has one or more CPU-bound threads
675 running at a real-time priority level, you should set
676 RCU_KTHREAD_PRIO to a priority higher than the highest-priority
677 real-time CPU-bound application thread. The default RCU_KTHREAD_PRIO
678 value of 1 is appropriate in the common case, which is real-time
679 applications that do not have any CPU-bound threads.
681 Some real-time applications might not have a single real-time
682 thread that saturates a given CPU, but instead might have
683 multiple real-time threads that, taken together, fully utilize
684 that CPU. In this case, you should set RCU_KTHREAD_PRIO to
685 a priority higher than the lowest-priority thread that is
686 conspiring to prevent the CPU from running any non-real-time
687 tasks. For example, if one thread at priority 10 and another
688 thread at priority 5 are between themselves fully consuming
689 the CPU time on a given CPU, then RCU_KTHREAD_PRIO should be
690 set to priority 6 or higher.
692 Specify the real-time priority, or take the default if unsure.
694 config RCU_BOOST_DELAY
695 int "Milliseconds to delay boosting after RCU grace-period start"
700 This option specifies the time to wait after the beginning of
701 a given grace period before priority-boosting preempted RCU
702 readers blocking that grace period. Note that any RCU reader
703 blocking an expedited RCU grace period is boosted immediately.
705 Accept the default if unsure.
708 bool "Offload RCU callback processing from boot-selected CPUs"
709 depends on TREE_RCU || PREEMPT_RCU
710 depends on RCU_EXPERT || NO_HZ_FULL
713 Use this option to reduce OS jitter for aggressive HPC or
714 real-time workloads. It can also be used to offload RCU
715 callback invocation to energy-efficient CPUs in battery-powered
716 asymmetric multiprocessors.
718 This option offloads callback invocation from the set of
719 CPUs specified at boot time by the rcu_nocbs parameter.
720 For each such CPU, a kthread ("rcuox/N") will be created to
721 invoke callbacks, where the "N" is the CPU being offloaded,
722 and where the "x" is "b" for RCU-bh, "p" for RCU-preempt, and
723 "s" for RCU-sched. Nothing prevents this kthread from running
724 on the specified CPUs, but (1) the kthreads may be preempted
725 between each callback, and (2) affinity or cgroups can be used
726 to force the kthreads to run on whatever set of CPUs is desired.
728 Say Y here if you want to help to debug reduced OS jitter.
729 Say N here if you are unsure.
732 prompt "Build-forced no-CBs CPUs"
733 default RCU_NOCB_CPU_NONE
734 depends on RCU_NOCB_CPU
736 This option allows no-CBs CPUs (whose RCU callbacks are invoked
737 from kthreads rather than from softirq context) to be specified
738 at build time. Additional no-CBs CPUs may be specified by
739 the rcu_nocbs= boot parameter.
741 config RCU_NOCB_CPU_NONE
742 bool "No build_forced no-CBs CPUs"
744 This option does not force any of the CPUs to be no-CBs CPUs.
745 Only CPUs designated by the rcu_nocbs= boot parameter will be
746 no-CBs CPUs, whose RCU callbacks will be invoked by per-CPU
747 kthreads whose names begin with "rcuo". All other CPUs will
748 invoke their own RCU callbacks in softirq context.
750 Select this option if you want to choose no-CBs CPUs at
751 boot time, for example, to allow testing of different no-CBs
752 configurations without having to rebuild the kernel each time.
754 config RCU_NOCB_CPU_ZERO
755 bool "CPU 0 is a build_forced no-CBs CPU"
757 This option forces CPU 0 to be a no-CBs CPU, so that its RCU
758 callbacks are invoked by a per-CPU kthread whose name begins
759 with "rcuo". Additional CPUs may be designated as no-CBs
760 CPUs using the rcu_nocbs= boot parameter will be no-CBs CPUs.
761 All other CPUs will invoke their own RCU callbacks in softirq
764 Select this if CPU 0 needs to be a no-CBs CPU for real-time
765 or energy-efficiency reasons, but the real reason it exists
766 is to ensure that randconfig testing covers mixed systems.
768 config RCU_NOCB_CPU_ALL
769 bool "All CPUs are build_forced no-CBs CPUs"
771 This option forces all CPUs to be no-CBs CPUs. The rcu_nocbs=
772 boot parameter will be ignored. All CPUs' RCU callbacks will
773 be executed in the context of per-CPU rcuo kthreads created for
774 this purpose. Assuming that the kthreads whose names start with
775 "rcuo" are bound to "housekeeping" CPUs, this reduces OS jitter
776 on the remaining CPUs, but might decrease memory locality during
777 RCU-callback invocation, thus potentially degrading throughput.
779 Select this if all CPUs need to be no-CBs CPUs for real-time
780 or energy-efficiency reasons.
784 config RCU_EXPEDITE_BOOT
788 This option enables expedited grace periods at boot time,
789 as if rcu_expedite_gp() had been invoked early in boot.
790 The corresponding rcu_unexpedite_gp() is invoked from
791 rcu_end_inkernel_boot(), which is intended to be invoked
792 at the end of the kernel-only boot sequence, just before
795 Accept the default if unsure.
797 endmenu # "RCU Subsystem"
804 tristate "Kernel .config support"
807 This option enables the complete Linux kernel ".config" file
808 contents to be saved in the kernel. It provides documentation
809 of which kernel options are used in a running kernel or in an
810 on-disk kernel. This information can be extracted from the kernel
811 image file with the script scripts/extract-ikconfig and used as
812 input to rebuild the current kernel or to build another kernel.
813 It can also be extracted from a running kernel by reading
814 /proc/config.gz if enabled (below).
817 bool "Enable access to .config through /proc/config.gz"
818 depends on IKCONFIG && PROC_FS
820 This option enables access to the kernel configuration file
821 through /proc/config.gz.
824 int "Kernel log buffer size (16 => 64KB, 17 => 128KB)"
829 Select the minimal kernel log buffer size as a power of 2.
830 The final size is affected by LOG_CPU_MAX_BUF_SHIFT config
831 parameter, see below. Any higher size also might be forced
832 by "log_buf_len" boot parameter.
842 config LOG_CPU_MAX_BUF_SHIFT
843 int "CPU kernel log buffer size contribution (13 => 8 KB, 17 => 128KB)"
846 default 12 if !BASE_SMALL
847 default 0 if BASE_SMALL
850 This option allows to increase the default ring buffer size
851 according to the number of CPUs. The value defines the contribution
852 of each CPU as a power of 2. The used space is typically only few
853 lines however it might be much more when problems are reported,
856 The increased size means that a new buffer has to be allocated and
857 the original static one is unused. It makes sense only on systems
858 with more CPUs. Therefore this value is used only when the sum of
859 contributions is greater than the half of the default kernel ring
860 buffer as defined by LOG_BUF_SHIFT. The default values are set
861 so that more than 64 CPUs are needed to trigger the allocation.
863 Also this option is ignored when "log_buf_len" kernel parameter is
864 used as it forces an exact (power of two) size of the ring buffer.
866 The number of possible CPUs is used for this computation ignoring
867 hotplugging making the computation optimal for the worst case
868 scenario while allowing a simple algorithm to be used from bootup.
870 Examples shift values and their meaning:
871 17 => 128 KB for each CPU
872 16 => 64 KB for each CPU
873 15 => 32 KB for each CPU
874 14 => 16 KB for each CPU
875 13 => 8 KB for each CPU
876 12 => 4 KB for each CPU
878 config NMI_LOG_BUF_SHIFT
879 int "Temporary per-CPU NMI log buffer size (12 => 4KB, 13 => 8KB)"
882 depends on PRINTK_NMI
884 Select the size of a per-CPU buffer where NMI messages are temporary
885 stored. They are copied to the main log buffer in a safe context
886 to avoid a deadlock. The value defines the size as a power of 2.
888 NMI messages are rare and limited. The largest one is when
889 a backtrace is printed. It usually fits into 4KB. Select
890 8KB if you want to be on the safe side.
893 17 => 128 KB for each CPU
894 16 => 64 KB for each CPU
895 15 => 32 KB for each CPU
896 14 => 16 KB for each CPU
897 13 => 8 KB for each CPU
898 12 => 4 KB for each CPU
901 # Architectures with an unreliable sched_clock() should select this:
903 config HAVE_UNSTABLE_SCHED_CLOCK
906 config GENERIC_SCHED_CLOCK
910 # For architectures that want to enable the support for NUMA-affine scheduler
913 config ARCH_SUPPORTS_NUMA_BALANCING
917 # For architectures that prefer to flush all TLBs after a number of pages
918 # are unmapped instead of sending one IPI per page to flush. The architecture
919 # must provide guarantees on what happens if a clean TLB cache entry is
920 # written after the unmap. Details are in mm/rmap.c near the check for
921 # should_defer_flush. The architecture should also consider if the full flush
922 # and the refill costs are offset by the savings of sending fewer IPIs.
923 config ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH
927 # For architectures that know their GCC __int128 support is sound
929 config ARCH_SUPPORTS_INT128
932 # For architectures that (ab)use NUMA to represent different memory regions
933 # all cpu-local but of different latencies, such as SuperH.
935 config ARCH_WANT_NUMA_VARIABLE_LOCALITY
938 config NUMA_BALANCING
939 bool "Memory placement aware NUMA scheduler"
940 depends on ARCH_SUPPORTS_NUMA_BALANCING
941 depends on !ARCH_WANT_NUMA_VARIABLE_LOCALITY
942 depends on SMP && NUMA && MIGRATION
944 This option adds support for automatic NUMA aware memory/task placement.
945 The mechanism is quite primitive and is based on migrating memory when
946 it has references to the node the task is running on.
948 This system will be inactive on UMA systems.
950 config NUMA_BALANCING_DEFAULT_ENABLED
951 bool "Automatically enable NUMA aware memory/task placement"
953 depends on NUMA_BALANCING
955 If set, automatic NUMA balancing will be enabled if running on a NUMA
959 bool "Control Group support"
962 This option adds support for grouping sets of processes together, for
963 use with process control subsystems such as Cpusets, CFS, memory
964 controls or device isolation.
966 - Documentation/scheduler/sched-design-CFS.txt (CFS)
967 - Documentation/cgroup-v1/ (features for grouping, isolation
968 and resource control)
978 bool "Memory controller"
982 Provides control over the memory footprint of tasks in a cgroup.
985 bool "Swap controller"
986 depends on MEMCG && SWAP
988 Provides control over the swap space consumed by tasks in a cgroup.
990 config MEMCG_SWAP_ENABLED
991 bool "Swap controller enabled by default"
992 depends on MEMCG_SWAP
995 Memory Resource Controller Swap Extension comes with its price in
996 a bigger memory consumption. General purpose distribution kernels
997 which want to enable the feature but keep it disabled by default
998 and let the user enable it by swapaccount=1 boot command line
999 parameter should have this option unselected.
1000 For those who want to have the feature enabled by default should
1001 select this option (if, for some reason, they need to disable it
1002 then swapaccount=0 does the trick).
1005 bool "IO controller"
1009 Generic block IO controller cgroup interface. This is the common
1010 cgroup interface which should be used by various IO controlling
1013 Currently, CFQ IO scheduler uses it to recognize task groups and
1014 control disk bandwidth allocation (proportional time slice allocation)
1015 to such task groups. It is also used by bio throttling logic in
1016 block layer to implement upper limit in IO rates on a device.
1018 This option only enables generic Block IO controller infrastructure.
1019 One needs to also enable actual IO controlling logic/policy. For
1020 enabling proportional weight division of disk bandwidth in CFQ, set
1021 CONFIG_CFQ_GROUP_IOSCHED=y; for enabling throttling policy, set
1022 CONFIG_BLK_DEV_THROTTLING=y.
1024 See Documentation/cgroup-v1/blkio-controller.txt for more information.
1026 config DEBUG_BLK_CGROUP
1027 bool "IO controller debugging"
1028 depends on BLK_CGROUP
1031 Enable some debugging help. Currently it exports additional stat
1032 files in a cgroup which can be useful for debugging.
1034 config CGROUP_WRITEBACK
1036 depends on MEMCG && BLK_CGROUP
1039 menuconfig CGROUP_SCHED
1040 bool "CPU controller"
1043 This feature lets CPU scheduler recognize task groups and control CPU
1044 bandwidth allocation to such task groups. It uses cgroups to group
1048 config FAIR_GROUP_SCHED
1049 bool "Group scheduling for SCHED_OTHER"
1050 depends on CGROUP_SCHED
1051 default CGROUP_SCHED
1053 config CFS_BANDWIDTH
1054 bool "CPU bandwidth provisioning for FAIR_GROUP_SCHED"
1055 depends on FAIR_GROUP_SCHED
1058 This option allows users to define CPU bandwidth rates (limits) for
1059 tasks running within the fair group scheduler. Groups with no limit
1060 set are considered to be unconstrained and will run with no
1062 See tip/Documentation/scheduler/sched-bwc.txt for more information.
1064 config RT_GROUP_SCHED
1065 bool "Group scheduling for SCHED_RR/FIFO"
1066 depends on CGROUP_SCHED
1069 This feature lets you explicitly allocate real CPU bandwidth
1070 to task groups. If enabled, it will also make it impossible to
1071 schedule realtime tasks for non-root users until you allocate
1072 realtime bandwidth for them.
1073 See Documentation/scheduler/sched-rt-group.txt for more information.
1078 bool "PIDs controller"
1080 Provides enforcement of process number limits in the scope of a
1081 cgroup. Any attempt to fork more processes than is allowed in the
1082 cgroup will fail. PIDs are fundamentally a global resource because it
1083 is fairly trivial to reach PID exhaustion before you reach even a
1084 conservative kmemcg limit. As a result, it is possible to grind a
1085 system to halt without being limited by other cgroup policies. The
1086 PIDs controller is designed to stop this from happening.
1088 It should be noted that organisational operations (such as attaching
1089 to a cgroup hierarchy will *not* be blocked by the PIDs controller),
1090 since the PIDs limit only affects a process's ability to fork, not to
1093 config CGROUP_FREEZER
1094 bool "Freezer controller"
1096 Provides a way to freeze and unfreeze all tasks in a
1099 This option affects the ORIGINAL cgroup interface. The cgroup2 memory
1100 controller includes important in-kernel memory consumers per default.
1102 If you're using cgroup2, say N.
1104 config CGROUP_HUGETLB
1105 bool "HugeTLB controller"
1106 depends on HUGETLB_PAGE
1110 Provides a cgroup controller for HugeTLB pages.
1111 When you enable this, you can put a per cgroup limit on HugeTLB usage.
1112 The limit is enforced during page fault. Since HugeTLB doesn't
1113 support page reclaim, enforcing the limit at page fault time implies
1114 that, the application will get SIGBUS signal if it tries to access
1115 HugeTLB pages beyond its limit. This requires the application to know
1116 beforehand how much HugeTLB pages it would require for its use. The
1117 control group is tracked in the third page lru pointer. This means
1118 that we cannot use the controller with huge page less than 3 pages.
1121 bool "Cpuset controller"
1123 This option will let you create and manage CPUSETs which
1124 allow dynamically partitioning a system into sets of CPUs and
1125 Memory Nodes and assigning tasks to run only within those sets.
1126 This is primarily useful on large SMP or NUMA systems.
1130 config PROC_PID_CPUSET
1131 bool "Include legacy /proc/<pid>/cpuset file"
1135 config CGROUP_DEVICE
1136 bool "Device controller"
1138 Provides a cgroup controller implementing whitelists for
1139 devices which a process in the cgroup can mknod or open.
1141 config CGROUP_CPUACCT
1142 bool "Simple CPU accounting controller"
1144 Provides a simple controller for monitoring the
1145 total CPU consumed by the tasks in a cgroup.
1148 bool "Perf controller"
1149 depends on PERF_EVENTS
1151 This option extends the perf per-cpu mode to restrict monitoring
1152 to threads which belong to the cgroup specified and run on the
1158 bool "Support for eBPF programs attached to cgroups"
1159 depends on BPF_SYSCALL && SOCK_CGROUP_DATA
1161 Allow attaching eBPF programs to a cgroup using the bpf(2)
1162 syscall command BPF_PROG_ATTACH.
1164 In which context these programs are accessed depends on the type
1165 of attachment. For instance, programs that are attached using
1166 BPF_CGROUP_INET_INGRESS will be executed on the ingress path of
1170 bool "Example controller"
1173 This option enables a simple controller that exports
1174 debugging information about the cgroups framework.
1180 config CHECKPOINT_RESTORE
1181 bool "Checkpoint/restore support" if EXPERT
1182 select PROC_CHILDREN
1185 Enables additional kernel features in a sake of checkpoint/restore.
1186 In particular it adds auxiliary prctl codes to setup process text,
1187 data and heap segment sizes, and a few additional /proc filesystem
1190 If unsure, say N here.
1192 menuconfig NAMESPACES
1193 bool "Namespaces support" if EXPERT
1194 depends on MULTIUSER
1197 Provides the way to make tasks work with different objects using
1198 the same id. For example same IPC id may refer to different objects
1199 or same user id or pid may refer to different tasks when used in
1200 different namespaces.
1205 bool "UTS namespace"
1208 In this namespace tasks see different info provided with the
1212 bool "IPC namespace"
1213 depends on (SYSVIPC || POSIX_MQUEUE)
1216 In this namespace tasks work with IPC ids which correspond to
1217 different IPC objects in different namespaces.
1220 bool "User namespace"
1223 This allows containers, i.e. vservers, to use user namespaces
1224 to provide different user info for different servers.
1226 When user namespaces are enabled in the kernel it is
1227 recommended that the MEMCG option also be enabled and that
1228 user-space use the memory control groups to limit the amount
1229 of memory a memory unprivileged users can use.
1234 bool "PID Namespaces"
1237 Support process id namespaces. This allows having multiple
1238 processes with the same pid as long as they are in different
1239 pid namespaces. This is a building block of containers.
1242 bool "Network namespace"
1246 Allow user space to create what appear to be multiple instances
1247 of the network stack.
1251 config SCHED_AUTOGROUP
1252 bool "Automatic process group scheduling"
1255 select FAIR_GROUP_SCHED
1257 This option optimizes the scheduler for common desktop workloads by
1258 automatically creating and populating task groups. This separation
1259 of workloads isolates aggressive CPU burners (like build jobs) from
1260 desktop applications. Task group autogeneration is currently based
1263 config SYSFS_DEPRECATED
1264 bool "Enable deprecated sysfs features to support old userspace tools"
1268 This option adds code that switches the layout of the "block" class
1269 devices, to not show up in /sys/class/block/, but only in
1272 This switch is only active when the sysfs.deprecated=1 boot option is
1273 passed or the SYSFS_DEPRECATED_V2 option is set.
1275 This option allows new kernels to run on old distributions and tools,
1276 which might get confused by /sys/class/block/. Since 2007/2008 all
1277 major distributions and tools handle this just fine.
1279 Recent distributions and userspace tools after 2009/2010 depend on
1280 the existence of /sys/class/block/, and will not work with this
1283 Only if you are using a new kernel on an old distribution, you might
1286 config SYSFS_DEPRECATED_V2
1287 bool "Enable deprecated sysfs features by default"
1290 depends on SYSFS_DEPRECATED
1292 Enable deprecated sysfs by default.
1294 See the CONFIG_SYSFS_DEPRECATED option for more details about this
1297 Only if you are using a new kernel on an old distribution, you might
1298 need to say Y here. Even then, odds are you would not need it
1299 enabled, you can always pass the boot option if absolutely necessary.
1302 bool "Kernel->user space relay support (formerly relayfs)"
1305 This option enables support for relay interface support in
1306 certain file systems (such as debugfs).
1307 It is designed to provide an efficient mechanism for tools and
1308 facilities to relay large amounts of data from kernel space to
1313 config BLK_DEV_INITRD
1314 bool "Initial RAM filesystem and RAM disk (initramfs/initrd) support"
1315 depends on BROKEN || !FRV
1317 The initial RAM filesystem is a ramfs which is loaded by the
1318 boot loader (loadlin or lilo) and that is mounted as root
1319 before the normal boot procedure. It is typically used to
1320 load modules needed to mount the "real" root file system,
1321 etc. See <file:Documentation/admin-guide/initrd.rst> for details.
1323 If RAM disk support (BLK_DEV_RAM) is also included, this
1324 also enables initial RAM disk (initrd) support and adds
1325 15 Kbytes (more on some other architectures) to the kernel size.
1331 source "usr/Kconfig"
1336 prompt "Compiler optimization level"
1337 default CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE
1339 config CC_OPTIMIZE_FOR_PERFORMANCE
1340 bool "Optimize for performance"
1342 This is the default optimization level for the kernel, building
1343 with the "-O2" compiler flag for best performance and most
1344 helpful compile-time warnings.
1346 config CC_OPTIMIZE_FOR_SIZE
1347 bool "Optimize for size"
1349 Enabling this option will pass "-Os" instead of "-O2" to
1350 your compiler resulting in a smaller kernel.
1365 config SYSCTL_EXCEPTION_TRACE
1368 Enable support for /proc/sys/debug/exception-trace.
1370 config SYSCTL_ARCH_UNALIGN_NO_WARN
1373 Enable support for /proc/sys/kernel/ignore-unaligned-usertrap
1374 Allows arch to define/use @no_unaligned_warning to possibly warn
1375 about unaligned access emulation going on under the hood.
1377 config SYSCTL_ARCH_UNALIGN_ALLOW
1380 Enable support for /proc/sys/kernel/unaligned-trap
1381 Allows arches to define/use @unaligned_enabled to runtime toggle
1382 the unaligned access emulation.
1383 see arch/parisc/kernel/unaligned.c for reference
1385 config HAVE_PCSPKR_PLATFORM
1388 # interpreter that classic socket filters depend on
1393 bool "Configure standard kernel features (expert users)"
1394 # Unhide debug options, to make the on-by-default options visible
1397 This option allows certain base kernel options and settings
1398 to be disabled or tweaked. This is for specialized
1399 environments which can tolerate a "non-standard" kernel.
1400 Only use this if you really know what you are doing.
1403 bool "Enable 16-bit UID system calls" if EXPERT
1404 depends on HAVE_UID16 && MULTIUSER
1407 This enables the legacy 16-bit UID syscall wrappers.
1410 bool "Multiple users, groups and capabilities support" if EXPERT
1413 This option enables support for non-root users, groups and
1416 If you say N here, all processes will run with UID 0, GID 0, and all
1417 possible capabilities. Saying N here also compiles out support for
1418 system calls related to UIDs, GIDs, and capabilities, such as setuid,
1421 If unsure, say Y here.
1423 config SGETMASK_SYSCALL
1424 bool "sgetmask/ssetmask syscalls support" if EXPERT
1425 def_bool PARISC || MN10300 || BLACKFIN || M68K || PPC || MIPS || X86 || SPARC || CRIS || MICROBLAZE || SUPERH
1427 sys_sgetmask and sys_ssetmask are obsolete system calls
1428 no longer supported in libc but still enabled by default in some
1431 If unsure, leave the default option here.
1433 config SYSFS_SYSCALL
1434 bool "Sysfs syscall support" if EXPERT
1437 sys_sysfs is an obsolete system call no longer supported in libc.
1438 Note that disabling this option is more secure but might break
1439 compatibility with some systems.
1441 If unsure say Y here.
1443 config SYSCTL_SYSCALL
1444 bool "Sysctl syscall support" if EXPERT
1445 depends on PROC_SYSCTL
1449 sys_sysctl uses binary paths that have been found challenging
1450 to properly maintain and use. The interface in /proc/sys
1451 using paths with ascii names is now the primary path to this
1454 Almost nothing using the binary sysctl interface so if you are
1455 trying to save some space it is probably safe to disable this,
1456 making your kernel marginally smaller.
1458 If unsure say N here.
1461 bool "Posix Clocks & timers" if EXPERT
1464 This includes native support for POSIX timers to the kernel.
1465 Some embedded systems have no use for them and therefore they
1466 can be configured out to reduce the size of the kernel image.
1468 When this option is disabled, the following syscalls won't be
1469 available: timer_create, timer_gettime: timer_getoverrun,
1470 timer_settime, timer_delete, clock_adjtime, getitimer,
1471 setitimer, alarm. Furthermore, the clock_settime, clock_gettime,
1472 clock_getres and clock_nanosleep syscalls will be limited to
1473 CLOCK_REALTIME, CLOCK_MONOTONIC and CLOCK_BOOTTIME only.
1478 bool "Load all symbols for debugging/ksymoops" if EXPERT
1481 Say Y here to let the kernel print out symbolic crash information and
1482 symbolic stack backtraces. This increases the size of the kernel
1483 somewhat, as all symbols have to be loaded into the kernel image.
1486 bool "Include all symbols in kallsyms"
1487 depends on DEBUG_KERNEL && KALLSYMS
1489 Normally kallsyms only contains the symbols of functions for nicer
1490 OOPS messages and backtraces (i.e., symbols from the text and inittext
1491 sections). This is sufficient for most cases. And only in very rare
1492 cases (e.g., when a debugger is used) all symbols are required (e.g.,
1493 names of variables from the data sections, etc).
1495 This option makes sure that all symbols are loaded into the kernel
1496 image (i.e., symbols from all sections) in cost of increased kernel
1497 size (depending on the kernel configuration, it may be 300KiB or
1498 something like this).
1500 Say N unless you really need all symbols.
1502 config KALLSYMS_ABSOLUTE_PERCPU
1505 default X86_64 && SMP
1507 config KALLSYMS_BASE_RELATIVE
1510 default !IA64 && !(TILE && 64BIT)
1512 Instead of emitting them as absolute values in the native word size,
1513 emit the symbol references in the kallsyms table as 32-bit entries,
1514 each containing a relative value in the range [base, base + U32_MAX]
1515 or, when KALLSYMS_ABSOLUTE_PERCPU is in effect, each containing either
1516 an absolute value in the range [0, S32_MAX] or a relative value in the
1517 range [base, base + S32_MAX], where base is the lowest relative symbol
1518 address encountered in the image.
1520 On 64-bit builds, this reduces the size of the address table by 50%,
1521 but more importantly, it results in entries whose values are build
1522 time constants, and no relocation pass is required at runtime to fix
1523 up the entries based on the runtime load address of the kernel.
1527 bool "Enable support for printk" if EXPERT
1530 This option enables normal printk support. Removing it
1531 eliminates most of the message strings from the kernel image
1532 and makes the kernel more or less silent. As this makes it
1533 very difficult to diagnose system problems, saying N here is
1534 strongly discouraged.
1542 bool "BUG() support" if EXPERT
1545 Disabling this option eliminates support for BUG and WARN, reducing
1546 the size of your kernel image and potentially quietly ignoring
1547 numerous fatal conditions. You should only consider disabling this
1548 option for embedded systems with no facilities for reporting errors.
1554 bool "Enable ELF core dumps" if EXPERT
1556 Enable support for generating core dumps. Disabling saves about 4k.
1559 config PCSPKR_PLATFORM
1560 bool "Enable PC-Speaker support" if EXPERT
1561 depends on HAVE_PCSPKR_PLATFORM
1565 This option allows to disable the internal PC-Speaker
1566 support, saving some memory.
1570 bool "Enable full-sized data structures for core" if EXPERT
1572 Disabling this option reduces the size of miscellaneous core
1573 kernel data structures. This saves memory on small machines,
1574 but may reduce performance.
1577 bool "Enable futex support" if EXPERT
1581 Disabling this option will cause the kernel to be built without
1582 support for "fast userspace mutexes". The resulting kernel may not
1583 run glibc-based applications correctly.
1585 config HAVE_FUTEX_CMPXCHG
1589 Architectures should select this if futex_atomic_cmpxchg_inatomic()
1590 is implemented and always working. This removes a couple of runtime
1594 bool "Enable eventpoll support" if EXPERT
1598 Disabling this option will cause the kernel to be built without
1599 support for epoll family of system calls.
1602 bool "Enable signalfd() system call" if EXPERT
1606 Enable the signalfd() system call that allows to receive signals
1607 on a file descriptor.
1612 bool "Enable timerfd() system call" if EXPERT
1616 Enable the timerfd() system call that allows to receive timer
1617 events on a file descriptor.
1622 bool "Enable eventfd() system call" if EXPERT
1626 Enable the eventfd() system call that allows to receive both
1627 kernel notification (ie. KAIO) or userspace notifications.
1631 # syscall, maps, verifier
1633 bool "Enable bpf() system call"
1638 Enable the bpf() system call that allows to manipulate eBPF
1639 programs and maps via file descriptors.
1642 bool "Use full shmem filesystem" if EXPERT
1646 The shmem is an internal filesystem used to manage shared memory.
1647 It is backed by swap and manages resource limits. It is also exported
1648 to userspace as tmpfs if TMPFS is enabled. Disabling this
1649 option replaces shmem and tmpfs with the much simpler ramfs code,
1650 which may be appropriate on small systems without swap.
1653 bool "Enable AIO support" if EXPERT
1656 This option enables POSIX asynchronous I/O which may by used
1657 by some high performance threaded applications. Disabling
1658 this option saves about 7k.
1660 config ADVISE_SYSCALLS
1661 bool "Enable madvise/fadvise syscalls" if EXPERT
1664 This option enables the madvise and fadvise syscalls, used by
1665 applications to advise the kernel about their future memory or file
1666 usage, improving performance. If building an embedded system where no
1667 applications use these syscalls, you can disable this option to save
1671 bool "Enable userfaultfd() system call"
1675 Enable the userfaultfd() system call that allows to intercept and
1676 handle page faults in userland.
1680 bool "Enable PCI quirk workarounds" if EXPERT
1683 This enables workarounds for various PCI chipset
1684 bugs/quirks. Disable this only if your target machine is
1685 unaffected by PCI quirks.
1688 bool "Enable membarrier() system call" if EXPERT
1691 Enable the membarrier() system call that allows issuing memory
1692 barriers across all running threads, which can be used to distribute
1693 the cost of user-space memory barriers asymmetrically by transforming
1694 pairs of memory barriers into pairs consisting of membarrier() and a
1700 bool "Embedded system"
1701 option allnoconfig_y
1704 This option should be enabled if compiling the kernel for
1705 an embedded system so certain expert options are available
1708 config HAVE_PERF_EVENTS
1711 See tools/perf/design.txt for details.
1713 config PERF_USE_VMALLOC
1716 See tools/perf/design.txt for details
1718 menu "Kernel Performance Events And Counters"
1721 bool "Kernel performance events and counters"
1722 default y if PROFILING
1723 depends on HAVE_PERF_EVENTS
1728 Enable kernel support for various performance events provided
1729 by software and hardware.
1731 Software events are supported either built-in or via the
1732 use of generic tracepoints.
1734 Most modern CPUs support performance events via performance
1735 counter registers. These registers count the number of certain
1736 types of hw events: such as instructions executed, cachemisses
1737 suffered, or branches mis-predicted - without slowing down the
1738 kernel or applications. These registers can also trigger interrupts
1739 when a threshold number of events have passed - and can thus be
1740 used to profile the code that runs on that CPU.
1742 The Linux Performance Event subsystem provides an abstraction of
1743 these software and hardware event capabilities, available via a
1744 system call and used by the "perf" utility in tools/perf/. It
1745 provides per task and per CPU counters, and it provides event
1746 capabilities on top of those.
1750 config DEBUG_PERF_USE_VMALLOC
1752 bool "Debug: use vmalloc to back perf mmap() buffers"
1753 depends on PERF_EVENTS && DEBUG_KERNEL && !PPC
1754 select PERF_USE_VMALLOC
1756 Use vmalloc memory to back perf mmap() buffers.
1758 Mostly useful for debugging the vmalloc code on platforms
1759 that don't require it.
1765 config VM_EVENT_COUNTERS
1767 bool "Enable VM event counters for /proc/vmstat" if EXPERT
1769 VM event counters are needed for event counts to be shown.
1770 This option allows the disabling of the VM event counters
1771 on EXPERT systems. /proc/vmstat will only show page counts
1772 if VM event counters are disabled.
1776 bool "Enable SLUB debugging support" if EXPERT
1777 depends on SLUB && SYSFS
1779 SLUB has extensive debug support features. Disabling these can
1780 result in significant savings in code size. This also disables
1781 SLUB sysfs support. /sys/slab will not exist and there will be
1782 no support for cache validation etc.
1785 bool "Disable heap randomization"
1788 Randomizing heap placement makes heap exploits harder, but it
1789 also breaks ancient binaries (including anything libc5 based).
1790 This option changes the bootup default to heap randomization
1791 disabled, and can be overridden at runtime by setting
1792 /proc/sys/kernel/randomize_va_space to 2.
1794 On non-ancient distros (post-2000 ones) N is usually a safe choice.
1797 prompt "Choose SLAB allocator"
1800 This option allows to select a slab allocator.
1804 select HAVE_HARDENED_USERCOPY_ALLOCATOR
1806 The regular slab allocator that is established and known to work
1807 well in all environments. It organizes cache hot objects in
1808 per cpu and per node queues.
1811 bool "SLUB (Unqueued Allocator)"
1812 select HAVE_HARDENED_USERCOPY_ALLOCATOR
1814 SLUB is a slab allocator that minimizes cache line usage
1815 instead of managing queues of cached objects (SLAB approach).
1816 Per cpu caching is realized using slabs of objects instead
1817 of queues of objects. SLUB can use memory efficiently
1818 and has enhanced diagnostics. SLUB is the default choice for
1823 bool "SLOB (Simple Allocator)"
1825 SLOB replaces the stock allocator with a drastically simpler
1826 allocator. SLOB is generally more space efficient but
1827 does not perform as well on large systems.
1831 config SLAB_FREELIST_RANDOM
1833 depends on SLAB || SLUB
1834 bool "SLAB freelist randomization"
1836 Randomizes the freelist order used on creating new pages. This
1837 security feature reduces the predictability of the kernel slab
1838 allocator against heap overflows.
1840 config SLUB_CPU_PARTIAL
1842 depends on SLUB && SMP
1843 bool "SLUB per cpu partial cache"
1845 Per cpu partial caches accellerate objects allocation and freeing
1846 that is local to a processor at the price of more indeterminism
1847 in the latency of the free. On overflow these caches will be cleared
1848 which requires the taking of locks that may cause latency spikes.
1849 Typically one would choose no for a realtime system.
1851 config MMAP_ALLOW_UNINITIALIZED
1852 bool "Allow mmapped anonymous memory to be uninitialized"
1853 depends on EXPERT && !MMU
1856 Normally, and according to the Linux spec, anonymous memory obtained
1857 from mmap() has it's contents cleared before it is passed to
1858 userspace. Enabling this config option allows you to request that
1859 mmap() skip that if it is given an MAP_UNINITIALIZED flag, thus
1860 providing a huge performance boost. If this option is not enabled,
1861 then the flag will be ignored.
1863 This is taken advantage of by uClibc's malloc(), and also by
1864 ELF-FDPIC binfmt's brk and stack allocator.
1866 Because of the obvious security issues, this option should only be
1867 enabled on embedded devices where you control what is run in
1868 userspace. Since that isn't generally a problem on no-MMU systems,
1869 it is normally safe to say Y here.
1871 See Documentation/nommu-mmap.txt for more information.
1873 config SYSTEM_DATA_VERIFICATION
1875 select SYSTEM_TRUSTED_KEYRING
1879 select ASYMMETRIC_KEY_TYPE
1880 select ASYMMETRIC_PUBLIC_KEY_SUBTYPE
1883 select X509_CERTIFICATE_PARSER
1884 select PKCS7_MESSAGE_PARSER
1886 Provide PKCS#7 message verification using the contents of the system
1887 trusted keyring to provide public keys. This then can be used for
1888 module verification, kexec image verification and firmware blob
1892 bool "Profiling support"
1894 Say Y here to enable the extended profiling support mechanisms used
1895 by profilers such as OProfile.
1898 # Place an empty function call at each tracepoint site. Can be
1899 # dynamically changed for a probe function.
1904 source "arch/Kconfig"
1906 endmenu # General setup
1908 config HAVE_GENERIC_DMA_COHERENT
1915 depends on SLAB || SLUB_DEBUG
1923 default 0 if BASE_FULL
1924 default 1 if !BASE_FULL
1927 bool "Enable loadable module support"
1930 Kernel modules are small pieces of compiled code which can
1931 be inserted in the running kernel, rather than being
1932 permanently built into the kernel. You use the "modprobe"
1933 tool to add (and sometimes remove) them. If you say Y here,
1934 many parts of the kernel can be built as modules (by
1935 answering M instead of Y where indicated): this is most
1936 useful for infrequently used options which are not required
1937 for booting. For more information, see the man pages for
1938 modprobe, lsmod, modinfo, insmod and rmmod.
1940 If you say Y here, you will need to run "make
1941 modules_install" to put the modules under /lib/modules/
1942 where modprobe can find them (you may need to be root to do
1949 config MODULE_FORCE_LOAD
1950 bool "Forced module loading"
1953 Allow loading of modules without version information (ie. modprobe
1954 --force). Forced module loading sets the 'F' (forced) taint flag and
1955 is usually a really bad idea.
1957 config MODULE_UNLOAD
1958 bool "Module unloading"
1960 Without this option you will not be able to unload any
1961 modules (note that some modules may not be unloadable
1962 anyway), which makes your kernel smaller, faster
1963 and simpler. If unsure, say Y.
1965 config MODULE_FORCE_UNLOAD
1966 bool "Forced module unloading"
1967 depends on MODULE_UNLOAD
1969 This option allows you to force a module to unload, even if the
1970 kernel believes it is unsafe: the kernel will remove the module
1971 without waiting for anyone to stop using it (using the -f option to
1972 rmmod). This is mainly for kernel developers and desperate users.
1976 bool "Module versioning support"
1978 Usually, you have to use modules compiled with your kernel.
1979 Saying Y here makes it sometimes possible to use modules
1980 compiled for different kernels, by adding enough information
1981 to the modules to (hopefully) spot any changes which would
1982 make them incompatible with the kernel you are running. If
1985 config MODULE_SRCVERSION_ALL
1986 bool "Source checksum for all modules"
1988 Modules which contain a MODULE_VERSION get an extra "srcversion"
1989 field inserted into their modinfo section, which contains a
1990 sum of the source files which made it. This helps maintainers
1991 see exactly which source was used to build a module (since
1992 others sometimes change the module source without updating
1993 the version). With this option, such a "srcversion" field
1994 will be created for all modules. If unsure, say N.
1997 bool "Module signature verification"
1999 select SYSTEM_DATA_VERIFICATION
2001 Check modules for valid signatures upon load: the signature
2002 is simply appended to the module. For more information see
2003 Documentation/module-signing.txt.
2005 Note that this option adds the OpenSSL development packages as a
2006 kernel build dependency so that the signing tool can use its crypto
2009 !!!WARNING!!! If you enable this option, you MUST make sure that the
2010 module DOES NOT get stripped after being signed. This includes the
2011 debuginfo strip done by some packagers (such as rpmbuild) and
2012 inclusion into an initramfs that wants the module size reduced.
2014 config MODULE_SIG_FORCE
2015 bool "Require modules to be validly signed"
2016 depends on MODULE_SIG
2018 Reject unsigned modules or signed modules for which we don't have a
2019 key. Without this, such modules will simply taint the kernel.
2021 config MODULE_SIG_ALL
2022 bool "Automatically sign all modules"
2024 depends on MODULE_SIG
2026 Sign all modules during make modules_install. Without this option,
2027 modules must be signed manually, using the scripts/sign-file tool.
2029 comment "Do not forget to sign required modules with scripts/sign-file"
2030 depends on MODULE_SIG_FORCE && !MODULE_SIG_ALL
2033 prompt "Which hash algorithm should modules be signed with?"
2034 depends on MODULE_SIG
2036 This determines which sort of hashing algorithm will be used during
2037 signature generation. This algorithm _must_ be built into the kernel
2038 directly so that signature verification can take place. It is not
2039 possible to load a signed module containing the algorithm to check
2040 the signature on that module.
2042 config MODULE_SIG_SHA1
2043 bool "Sign modules with SHA-1"
2046 config MODULE_SIG_SHA224
2047 bool "Sign modules with SHA-224"
2048 select CRYPTO_SHA256
2050 config MODULE_SIG_SHA256
2051 bool "Sign modules with SHA-256"
2052 select CRYPTO_SHA256
2054 config MODULE_SIG_SHA384
2055 bool "Sign modules with SHA-384"
2056 select CRYPTO_SHA512
2058 config MODULE_SIG_SHA512
2059 bool "Sign modules with SHA-512"
2060 select CRYPTO_SHA512
2064 config MODULE_SIG_HASH
2066 depends on MODULE_SIG
2067 default "sha1" if MODULE_SIG_SHA1
2068 default "sha224" if MODULE_SIG_SHA224
2069 default "sha256" if MODULE_SIG_SHA256
2070 default "sha384" if MODULE_SIG_SHA384
2071 default "sha512" if MODULE_SIG_SHA512
2073 config MODULE_COMPRESS
2074 bool "Compress modules on installation"
2078 Compresses kernel modules when 'make modules_install' is run; gzip or
2079 xz depending on "Compression algorithm" below.
2081 module-init-tools MAY support gzip, and kmod MAY support gzip and xz.
2083 Out-of-tree kernel modules installed using Kbuild will also be
2084 compressed upon installation.
2086 Note: for modules inside an initrd or initramfs, it's more efficient
2087 to compress the whole initrd or initramfs instead.
2089 Note: This is fully compatible with signed modules.
2094 prompt "Compression algorithm"
2095 depends on MODULE_COMPRESS
2096 default MODULE_COMPRESS_GZIP
2098 This determines which sort of compression will be used during
2099 'make modules_install'.
2101 GZIP (default) and XZ are supported.
2103 config MODULE_COMPRESS_GZIP
2106 config MODULE_COMPRESS_XZ
2111 config TRIM_UNUSED_KSYMS
2112 bool "Trim unused exported kernel symbols"
2113 depends on MODULES && !UNUSED_SYMBOLS
2115 The kernel and some modules make many symbols available for
2116 other modules to use via EXPORT_SYMBOL() and variants. Depending
2117 on the set of modules being selected in your kernel configuration,
2118 many of those exported symbols might never be used.
2120 This option allows for unused exported symbols to be dropped from
2121 the build. In turn, this provides the compiler more opportunities
2122 (especially when using LTO) for optimizing the code and reducing
2123 binary size. This might have some security advantages as well.
2125 If unsure, or if you need to build out-of-tree modules, say N.
2129 config MODULES_TREE_LOOKUP
2131 depends on PERF_EVENTS || TRACING
2133 config INIT_ALL_POSSIBLE
2136 Back when each arch used to define their own cpu_online_mask and
2137 cpu_possible_mask, some of them chose to initialize cpu_possible_mask
2138 with all 1s, and others with all 0s. When they were centralised,
2139 it was better to provide this option than to break all the archs
2140 and have several arch maintainers pursuing me down dark alleys.
2142 source "block/Kconfig"
2144 config PREEMPT_NOTIFIERS
2154 Build a simple ASN.1 grammar compiler that produces a bytecode output
2155 that can be interpreted by the ASN.1 stream decoder and used to
2156 inform it as to what tags are to be expected in a stream and what
2157 functions to call on what tags.
2159 source "kernel/Kconfig.locks"
projects / mirror_ubuntu-artful-kernel.git / blob