]> git.proxmox.com Git - mirror_ubuntu-artful-kernel.git/blob - ipc/sem.c
Merge branch 'for-4.1/sensor-hub' into for-linus
[mirror_ubuntu-artful-kernel.git] / ipc / sem.c
1 /*
2 * linux/ipc/sem.c
3 * Copyright (C) 1992 Krishna Balasubramanian
4 * Copyright (C) 1995 Eric Schenk, Bruno Haible
5 *
6 * /proc/sysvipc/sem support (c) 1999 Dragos Acostachioaie <dragos@iname.com>
7 *
8 * SMP-threaded, sysctl's added
9 * (c) 1999 Manfred Spraul <manfred@colorfullife.com>
10 * Enforced range limit on SEM_UNDO
11 * (c) 2001 Red Hat Inc
12 * Lockless wakeup
13 * (c) 2003 Manfred Spraul <manfred@colorfullife.com>
14 * Further wakeup optimizations, documentation
15 * (c) 2010 Manfred Spraul <manfred@colorfullife.com>
16 *
17 * support for audit of ipc object properties and permission changes
18 * Dustin Kirkland <dustin.kirkland@us.ibm.com>
19 *
20 * namespaces support
21 * OpenVZ, SWsoft Inc.
22 * Pavel Emelianov <xemul@openvz.org>
23 *
24 * Implementation notes: (May 2010)
25 * This file implements System V semaphores.
26 *
27 * User space visible behavior:
28 * - FIFO ordering for semop() operations (just FIFO, not starvation
29 * protection)
30 * - multiple semaphore operations that alter the same semaphore in
31 * one semop() are handled.
32 * - sem_ctime (time of last semctl()) is updated in the IPC_SET, SETVAL and
33 * SETALL calls.
34 * - two Linux specific semctl() commands: SEM_STAT, SEM_INFO.
35 * - undo adjustments at process exit are limited to 0..SEMVMX.
36 * - namespace are supported.
37 * - SEMMSL, SEMMNS, SEMOPM and SEMMNI can be configured at runtine by writing
38 * to /proc/sys/kernel/sem.
39 * - statistics about the usage are reported in /proc/sysvipc/sem.
40 *
41 * Internals:
42 * - scalability:
43 * - all global variables are read-mostly.
44 * - semop() calls and semctl(RMID) are synchronized by RCU.
45 * - most operations do write operations (actually: spin_lock calls) to
46 * the per-semaphore array structure.
47 * Thus: Perfect SMP scaling between independent semaphore arrays.
48 * If multiple semaphores in one array are used, then cache line
49 * trashing on the semaphore array spinlock will limit the scaling.
50 * - semncnt and semzcnt are calculated on demand in count_semcnt()
51 * - the task that performs a successful semop() scans the list of all
52 * sleeping tasks and completes any pending operations that can be fulfilled.
53 * Semaphores are actively given to waiting tasks (necessary for FIFO).
54 * (see update_queue())
55 * - To improve the scalability, the actual wake-up calls are performed after
56 * dropping all locks. (see wake_up_sem_queue_prepare(),
57 * wake_up_sem_queue_do())
58 * - All work is done by the waker, the woken up task does not have to do
59 * anything - not even acquiring a lock or dropping a refcount.
60 * - A woken up task may not even touch the semaphore array anymore, it may
61 * have been destroyed already by a semctl(RMID).
62 * - The synchronizations between wake-ups due to a timeout/signal and a
63 * wake-up due to a completed semaphore operation is achieved by using an
64 * intermediate state (IN_WAKEUP).
65 * - UNDO values are stored in an array (one per process and per
66 * semaphore array, lazily allocated). For backwards compatibility, multiple
67 * modes for the UNDO variables are supported (per process, per thread)
68 * (see copy_semundo, CLONE_SYSVSEM)
69 * - There are two lists of the pending operations: a per-array list
70 * and per-semaphore list (stored in the array). This allows to achieve FIFO
71 * ordering without always scanning all pending operations.
72 * The worst-case behavior is nevertheless O(N^2) for N wakeups.
73 */
74
75 #include <linux/slab.h>
76 #include <linux/spinlock.h>
77 #include <linux/init.h>
78 #include <linux/proc_fs.h>
79 #include <linux/time.h>
80 #include <linux/security.h>
81 #include <linux/syscalls.h>
82 #include <linux/audit.h>
83 #include <linux/capability.h>
84 #include <linux/seq_file.h>
85 #include <linux/rwsem.h>
86 #include <linux/nsproxy.h>
87 #include <linux/ipc_namespace.h>
88
89 #include <linux/uaccess.h>
90 #include "util.h"
91
92 /* One semaphore structure for each semaphore in the system. */
93 struct sem {
94 int semval; /* current value */
95 int sempid; /* pid of last operation */
96 spinlock_t lock; /* spinlock for fine-grained semtimedop */
97 struct list_head pending_alter; /* pending single-sop operations */
98 /* that alter the semaphore */
99 struct list_head pending_const; /* pending single-sop operations */
100 /* that do not alter the semaphore*/
101 time_t sem_otime; /* candidate for sem_otime */
102 } ____cacheline_aligned_in_smp;
103
104 /* One queue for each sleeping process in the system. */
105 struct sem_queue {
106 struct list_head list; /* queue of pending operations */
107 struct task_struct *sleeper; /* this process */
108 struct sem_undo *undo; /* undo structure */
109 int pid; /* process id of requesting process */
110 int status; /* completion status of operation */
111 struct sembuf *sops; /* array of pending operations */
112 struct sembuf *blocking; /* the operation that blocked */
113 int nsops; /* number of operations */
114 int alter; /* does *sops alter the array? */
115 };
116
117 /* Each task has a list of undo requests. They are executed automatically
118 * when the process exits.
119 */
120 struct sem_undo {
121 struct list_head list_proc; /* per-process list: *
122 * all undos from one process
123 * rcu protected */
124 struct rcu_head rcu; /* rcu struct for sem_undo */
125 struct sem_undo_list *ulp; /* back ptr to sem_undo_list */
126 struct list_head list_id; /* per semaphore array list:
127 * all undos for one array */
128 int semid; /* semaphore set identifier */
129 short *semadj; /* array of adjustments */
130 /* one per semaphore */
131 };
132
133 /* sem_undo_list controls shared access to the list of sem_undo structures
134 * that may be shared among all a CLONE_SYSVSEM task group.
135 */
136 struct sem_undo_list {
137 atomic_t refcnt;
138 spinlock_t lock;
139 struct list_head list_proc;
140 };
141
142
143 #define sem_ids(ns) ((ns)->ids[IPC_SEM_IDS])
144
145 #define sem_checkid(sma, semid) ipc_checkid(&sma->sem_perm, semid)
146
147 static int newary(struct ipc_namespace *, struct ipc_params *);
148 static void freeary(struct ipc_namespace *, struct kern_ipc_perm *);
149 #ifdef CONFIG_PROC_FS
150 static int sysvipc_sem_proc_show(struct seq_file *s, void *it);
151 #endif
152
153 #define SEMMSL_FAST 256 /* 512 bytes on stack */
154 #define SEMOPM_FAST 64 /* ~ 372 bytes on stack */
155
156 /*
157 * Locking:
158 * sem_undo.id_next,
159 * sem_array.complex_count,
160 * sem_array.pending{_alter,_cont},
161 * sem_array.sem_undo: global sem_lock() for read/write
162 * sem_undo.proc_next: only "current" is allowed to read/write that field.
163 *
164 * sem_array.sem_base[i].pending_{const,alter}:
165 * global or semaphore sem_lock() for read/write
166 */
167
168 #define sc_semmsl sem_ctls[0]
169 #define sc_semmns sem_ctls[1]
170 #define sc_semopm sem_ctls[2]
171 #define sc_semmni sem_ctls[3]
172
173 void sem_init_ns(struct ipc_namespace *ns)
174 {
175 ns->sc_semmsl = SEMMSL;
176 ns->sc_semmns = SEMMNS;
177 ns->sc_semopm = SEMOPM;
178 ns->sc_semmni = SEMMNI;
179 ns->used_sems = 0;
180 ipc_init_ids(&ns->ids[IPC_SEM_IDS]);
181 }
182
183 #ifdef CONFIG_IPC_NS
184 void sem_exit_ns(struct ipc_namespace *ns)
185 {
186 free_ipcs(ns, &sem_ids(ns), freeary);
187 idr_destroy(&ns->ids[IPC_SEM_IDS].ipcs_idr);
188 }
189 #endif
190
191 void __init sem_init(void)
192 {
193 sem_init_ns(&init_ipc_ns);
194 ipc_init_proc_interface("sysvipc/sem",
195 " key semid perms nsems uid gid cuid cgid otime ctime\n",
196 IPC_SEM_IDS, sysvipc_sem_proc_show);
197 }
198
199 /**
200 * unmerge_queues - unmerge queues, if possible.
201 * @sma: semaphore array
202 *
203 * The function unmerges the wait queues if complex_count is 0.
204 * It must be called prior to dropping the global semaphore array lock.
205 */
206 static void unmerge_queues(struct sem_array *sma)
207 {
208 struct sem_queue *q, *tq;
209
210 /* complex operations still around? */
211 if (sma->complex_count)
212 return;
213 /*
214 * We will switch back to simple mode.
215 * Move all pending operation back into the per-semaphore
216 * queues.
217 */
218 list_for_each_entry_safe(q, tq, &sma->pending_alter, list) {
219 struct sem *curr;
220 curr = &sma->sem_base[q->sops[0].sem_num];
221
222 list_add_tail(&q->list, &curr->pending_alter);
223 }
224 INIT_LIST_HEAD(&sma->pending_alter);
225 }
226
227 /**
228 * merge_queues - merge single semop queues into global queue
229 * @sma: semaphore array
230 *
231 * This function merges all per-semaphore queues into the global queue.
232 * It is necessary to achieve FIFO ordering for the pending single-sop
233 * operations when a multi-semop operation must sleep.
234 * Only the alter operations must be moved, the const operations can stay.
235 */
236 static void merge_queues(struct sem_array *sma)
237 {
238 int i;
239 for (i = 0; i < sma->sem_nsems; i++) {
240 struct sem *sem = sma->sem_base + i;
241
242 list_splice_init(&sem->pending_alter, &sma->pending_alter);
243 }
244 }
245
246 static void sem_rcu_free(struct rcu_head *head)
247 {
248 struct ipc_rcu *p = container_of(head, struct ipc_rcu, rcu);
249 struct sem_array *sma = ipc_rcu_to_struct(p);
250
251 security_sem_free(sma);
252 ipc_rcu_free(head);
253 }
254
255 /*
256 * Wait until all currently ongoing simple ops have completed.
257 * Caller must own sem_perm.lock.
258 * New simple ops cannot start, because simple ops first check
259 * that sem_perm.lock is free.
260 * that a) sem_perm.lock is free and b) complex_count is 0.
261 */
262 static void sem_wait_array(struct sem_array *sma)
263 {
264 int i;
265 struct sem *sem;
266
267 if (sma->complex_count) {
268 /* The thread that increased sma->complex_count waited on
269 * all sem->lock locks. Thus we don't need to wait again.
270 */
271 return;
272 }
273
274 for (i = 0; i < sma->sem_nsems; i++) {
275 sem = sma->sem_base + i;
276 spin_unlock_wait(&sem->lock);
277 }
278 }
279
280 /*
281 * If the request contains only one semaphore operation, and there are
282 * no complex transactions pending, lock only the semaphore involved.
283 * Otherwise, lock the entire semaphore array, since we either have
284 * multiple semaphores in our own semops, or we need to look at
285 * semaphores from other pending complex operations.
286 */
287 static inline int sem_lock(struct sem_array *sma, struct sembuf *sops,
288 int nsops)
289 {
290 struct sem *sem;
291
292 if (nsops != 1) {
293 /* Complex operation - acquire a full lock */
294 ipc_lock_object(&sma->sem_perm);
295
296 /* And wait until all simple ops that are processed
297 * right now have dropped their locks.
298 */
299 sem_wait_array(sma);
300 return -1;
301 }
302
303 /*
304 * Only one semaphore affected - try to optimize locking.
305 * The rules are:
306 * - optimized locking is possible if no complex operation
307 * is either enqueued or processed right now.
308 * - The test for enqueued complex ops is simple:
309 * sma->complex_count != 0
310 * - Testing for complex ops that are processed right now is
311 * a bit more difficult. Complex ops acquire the full lock
312 * and first wait that the running simple ops have completed.
313 * (see above)
314 * Thus: If we own a simple lock and the global lock is free
315 * and complex_count is now 0, then it will stay 0 and
316 * thus just locking sem->lock is sufficient.
317 */
318 sem = sma->sem_base + sops->sem_num;
319
320 if (sma->complex_count == 0) {
321 /*
322 * It appears that no complex operation is around.
323 * Acquire the per-semaphore lock.
324 */
325 spin_lock(&sem->lock);
326
327 /* Then check that the global lock is free */
328 if (!spin_is_locked(&sma->sem_perm.lock)) {
329 /*
330 * The ipc object lock check must be visible on all
331 * cores before rechecking the complex count. Otherwise
332 * we can race with another thread that does:
333 * complex_count++;
334 * spin_unlock(sem_perm.lock);
335 */
336 smp_rmb();
337
338 /*
339 * Now repeat the test of complex_count:
340 * It can't change anymore until we drop sem->lock.
341 * Thus: if is now 0, then it will stay 0.
342 */
343 if (sma->complex_count == 0) {
344 /* fast path successful! */
345 return sops->sem_num;
346 }
347 }
348 spin_unlock(&sem->lock);
349 }
350
351 /* slow path: acquire the full lock */
352 ipc_lock_object(&sma->sem_perm);
353
354 if (sma->complex_count == 0) {
355 /* False alarm:
356 * There is no complex operation, thus we can switch
357 * back to the fast path.
358 */
359 spin_lock(&sem->lock);
360 ipc_unlock_object(&sma->sem_perm);
361 return sops->sem_num;
362 } else {
363 /* Not a false alarm, thus complete the sequence for a
364 * full lock.
365 */
366 sem_wait_array(sma);
367 return -1;
368 }
369 }
370
371 static inline void sem_unlock(struct sem_array *sma, int locknum)
372 {
373 if (locknum == -1) {
374 unmerge_queues(sma);
375 ipc_unlock_object(&sma->sem_perm);
376 } else {
377 struct sem *sem = sma->sem_base + locknum;
378 spin_unlock(&sem->lock);
379 }
380 }
381
382 /*
383 * sem_lock_(check_) routines are called in the paths where the rwsem
384 * is not held.
385 *
386 * The caller holds the RCU read lock.
387 */
388 static inline struct sem_array *sem_obtain_lock(struct ipc_namespace *ns,
389 int id, struct sembuf *sops, int nsops, int *locknum)
390 {
391 struct kern_ipc_perm *ipcp;
392 struct sem_array *sma;
393
394 ipcp = ipc_obtain_object(&sem_ids(ns), id);
395 if (IS_ERR(ipcp))
396 return ERR_CAST(ipcp);
397
398 sma = container_of(ipcp, struct sem_array, sem_perm);
399 *locknum = sem_lock(sma, sops, nsops);
400
401 /* ipc_rmid() may have already freed the ID while sem_lock
402 * was spinning: verify that the structure is still valid
403 */
404 if (ipc_valid_object(ipcp))
405 return container_of(ipcp, struct sem_array, sem_perm);
406
407 sem_unlock(sma, *locknum);
408 return ERR_PTR(-EINVAL);
409 }
410
411 static inline struct sem_array *sem_obtain_object(struct ipc_namespace *ns, int id)
412 {
413 struct kern_ipc_perm *ipcp = ipc_obtain_object(&sem_ids(ns), id);
414
415 if (IS_ERR(ipcp))
416 return ERR_CAST(ipcp);
417
418 return container_of(ipcp, struct sem_array, sem_perm);
419 }
420
421 static inline struct sem_array *sem_obtain_object_check(struct ipc_namespace *ns,
422 int id)
423 {
424 struct kern_ipc_perm *ipcp = ipc_obtain_object_check(&sem_ids(ns), id);
425
426 if (IS_ERR(ipcp))
427 return ERR_CAST(ipcp);
428
429 return container_of(ipcp, struct sem_array, sem_perm);
430 }
431
432 static inline void sem_lock_and_putref(struct sem_array *sma)
433 {
434 sem_lock(sma, NULL, -1);
435 ipc_rcu_putref(sma, ipc_rcu_free);
436 }
437
438 static inline void sem_rmid(struct ipc_namespace *ns, struct sem_array *s)
439 {
440 ipc_rmid(&sem_ids(ns), &s->sem_perm);
441 }
442
443 /*
444 * Lockless wakeup algorithm:
445 * Without the check/retry algorithm a lockless wakeup is possible:
446 * - queue.status is initialized to -EINTR before blocking.
447 * - wakeup is performed by
448 * * unlinking the queue entry from the pending list
449 * * setting queue.status to IN_WAKEUP
450 * This is the notification for the blocked thread that a
451 * result value is imminent.
452 * * call wake_up_process
453 * * set queue.status to the final value.
454 * - the previously blocked thread checks queue.status:
455 * * if it's IN_WAKEUP, then it must wait until the value changes
456 * * if it's not -EINTR, then the operation was completed by
457 * update_queue. semtimedop can return queue.status without
458 * performing any operation on the sem array.
459 * * otherwise it must acquire the spinlock and check what's up.
460 *
461 * The two-stage algorithm is necessary to protect against the following
462 * races:
463 * - if queue.status is set after wake_up_process, then the woken up idle
464 * thread could race forward and try (and fail) to acquire sma->lock
465 * before update_queue had a chance to set queue.status
466 * - if queue.status is written before wake_up_process and if the
467 * blocked process is woken up by a signal between writing
468 * queue.status and the wake_up_process, then the woken up
469 * process could return from semtimedop and die by calling
470 * sys_exit before wake_up_process is called. Then wake_up_process
471 * will oops, because the task structure is already invalid.
472 * (yes, this happened on s390 with sysv msg).
473 *
474 */
475 #define IN_WAKEUP 1
476
477 /**
478 * newary - Create a new semaphore set
479 * @ns: namespace
480 * @params: ptr to the structure that contains key, semflg and nsems
481 *
482 * Called with sem_ids.rwsem held (as a writer)
483 */
484 static int newary(struct ipc_namespace *ns, struct ipc_params *params)
485 {
486 int id;
487 int retval;
488 struct sem_array *sma;
489 int size;
490 key_t key = params->key;
491 int nsems = params->u.nsems;
492 int semflg = params->flg;
493 int i;
494
495 if (!nsems)
496 return -EINVAL;
497 if (ns->used_sems + nsems > ns->sc_semmns)
498 return -ENOSPC;
499
500 size = sizeof(*sma) + nsems * sizeof(struct sem);
501 sma = ipc_rcu_alloc(size);
502 if (!sma)
503 return -ENOMEM;
504
505 memset(sma, 0, size);
506
507 sma->sem_perm.mode = (semflg & S_IRWXUGO);
508 sma->sem_perm.key = key;
509
510 sma->sem_perm.security = NULL;
511 retval = security_sem_alloc(sma);
512 if (retval) {
513 ipc_rcu_putref(sma, ipc_rcu_free);
514 return retval;
515 }
516
517 sma->sem_base = (struct sem *) &sma[1];
518
519 for (i = 0; i < nsems; i++) {
520 INIT_LIST_HEAD(&sma->sem_base[i].pending_alter);
521 INIT_LIST_HEAD(&sma->sem_base[i].pending_const);
522 spin_lock_init(&sma->sem_base[i].lock);
523 }
524
525 sma->complex_count = 0;
526 INIT_LIST_HEAD(&sma->pending_alter);
527 INIT_LIST_HEAD(&sma->pending_const);
528 INIT_LIST_HEAD(&sma->list_id);
529 sma->sem_nsems = nsems;
530 sma->sem_ctime = get_seconds();
531
532 id = ipc_addid(&sem_ids(ns), &sma->sem_perm, ns->sc_semmni);
533 if (id < 0) {
534 ipc_rcu_putref(sma, sem_rcu_free);
535 return id;
536 }
537 ns->used_sems += nsems;
538
539 sem_unlock(sma, -1);
540 rcu_read_unlock();
541
542 return sma->sem_perm.id;
543 }
544
545
546 /*
547 * Called with sem_ids.rwsem and ipcp locked.
548 */
549 static inline int sem_security(struct kern_ipc_perm *ipcp, int semflg)
550 {
551 struct sem_array *sma;
552
553 sma = container_of(ipcp, struct sem_array, sem_perm);
554 return security_sem_associate(sma, semflg);
555 }
556
557 /*
558 * Called with sem_ids.rwsem and ipcp locked.
559 */
560 static inline int sem_more_checks(struct kern_ipc_perm *ipcp,
561 struct ipc_params *params)
562 {
563 struct sem_array *sma;
564
565 sma = container_of(ipcp, struct sem_array, sem_perm);
566 if (params->u.nsems > sma->sem_nsems)
567 return -EINVAL;
568
569 return 0;
570 }
571
572 SYSCALL_DEFINE3(semget, key_t, key, int, nsems, int, semflg)
573 {
574 struct ipc_namespace *ns;
575 static const struct ipc_ops sem_ops = {
576 .getnew = newary,
577 .associate = sem_security,
578 .more_checks = sem_more_checks,
579 };
580 struct ipc_params sem_params;
581
582 ns = current->nsproxy->ipc_ns;
583
584 if (nsems < 0 || nsems > ns->sc_semmsl)
585 return -EINVAL;
586
587 sem_params.key = key;
588 sem_params.flg = semflg;
589 sem_params.u.nsems = nsems;
590
591 return ipcget(ns, &sem_ids(ns), &sem_ops, &sem_params);
592 }
593
594 /**
595 * perform_atomic_semop - Perform (if possible) a semaphore operation
596 * @sma: semaphore array
597 * @q: struct sem_queue that describes the operation
598 *
599 * Returns 0 if the operation was possible.
600 * Returns 1 if the operation is impossible, the caller must sleep.
601 * Negative values are error codes.
602 */
603 static int perform_atomic_semop(struct sem_array *sma, struct sem_queue *q)
604 {
605 int result, sem_op, nsops, pid;
606 struct sembuf *sop;
607 struct sem *curr;
608 struct sembuf *sops;
609 struct sem_undo *un;
610
611 sops = q->sops;
612 nsops = q->nsops;
613 un = q->undo;
614
615 for (sop = sops; sop < sops + nsops; sop++) {
616 curr = sma->sem_base + sop->sem_num;
617 sem_op = sop->sem_op;
618 result = curr->semval;
619
620 if (!sem_op && result)
621 goto would_block;
622
623 result += sem_op;
624 if (result < 0)
625 goto would_block;
626 if (result > SEMVMX)
627 goto out_of_range;
628
629 if (sop->sem_flg & SEM_UNDO) {
630 int undo = un->semadj[sop->sem_num] - sem_op;
631 /* Exceeding the undo range is an error. */
632 if (undo < (-SEMAEM - 1) || undo > SEMAEM)
633 goto out_of_range;
634 un->semadj[sop->sem_num] = undo;
635 }
636
637 curr->semval = result;
638 }
639
640 sop--;
641 pid = q->pid;
642 while (sop >= sops) {
643 sma->sem_base[sop->sem_num].sempid = pid;
644 sop--;
645 }
646
647 return 0;
648
649 out_of_range:
650 result = -ERANGE;
651 goto undo;
652
653 would_block:
654 q->blocking = sop;
655
656 if (sop->sem_flg & IPC_NOWAIT)
657 result = -EAGAIN;
658 else
659 result = 1;
660
661 undo:
662 sop--;
663 while (sop >= sops) {
664 sem_op = sop->sem_op;
665 sma->sem_base[sop->sem_num].semval -= sem_op;
666 if (sop->sem_flg & SEM_UNDO)
667 un->semadj[sop->sem_num] += sem_op;
668 sop--;
669 }
670
671 return result;
672 }
673
674 /** wake_up_sem_queue_prepare(q, error): Prepare wake-up
675 * @q: queue entry that must be signaled
676 * @error: Error value for the signal
677 *
678 * Prepare the wake-up of the queue entry q.
679 */
680 static void wake_up_sem_queue_prepare(struct list_head *pt,
681 struct sem_queue *q, int error)
682 {
683 if (list_empty(pt)) {
684 /*
685 * Hold preempt off so that we don't get preempted and have the
686 * wakee busy-wait until we're scheduled back on.
687 */
688 preempt_disable();
689 }
690 q->status = IN_WAKEUP;
691 q->pid = error;
692
693 list_add_tail(&q->list, pt);
694 }
695
696 /**
697 * wake_up_sem_queue_do - do the actual wake-up
698 * @pt: list of tasks to be woken up
699 *
700 * Do the actual wake-up.
701 * The function is called without any locks held, thus the semaphore array
702 * could be destroyed already and the tasks can disappear as soon as the
703 * status is set to the actual return code.
704 */
705 static void wake_up_sem_queue_do(struct list_head *pt)
706 {
707 struct sem_queue *q, *t;
708 int did_something;
709
710 did_something = !list_empty(pt);
711 list_for_each_entry_safe(q, t, pt, list) {
712 wake_up_process(q->sleeper);
713 /* q can disappear immediately after writing q->status. */
714 smp_wmb();
715 q->status = q->pid;
716 }
717 if (did_something)
718 preempt_enable();
719 }
720
721 static void unlink_queue(struct sem_array *sma, struct sem_queue *q)
722 {
723 list_del(&q->list);
724 if (q->nsops > 1)
725 sma->complex_count--;
726 }
727
728 /** check_restart(sma, q)
729 * @sma: semaphore array
730 * @q: the operation that just completed
731 *
732 * update_queue is O(N^2) when it restarts scanning the whole queue of
733 * waiting operations. Therefore this function checks if the restart is
734 * really necessary. It is called after a previously waiting operation
735 * modified the array.
736 * Note that wait-for-zero operations are handled without restart.
737 */
738 static int check_restart(struct sem_array *sma, struct sem_queue *q)
739 {
740 /* pending complex alter operations are too difficult to analyse */
741 if (!list_empty(&sma->pending_alter))
742 return 1;
743
744 /* we were a sleeping complex operation. Too difficult */
745 if (q->nsops > 1)
746 return 1;
747
748 /* It is impossible that someone waits for the new value:
749 * - complex operations always restart.
750 * - wait-for-zero are handled seperately.
751 * - q is a previously sleeping simple operation that
752 * altered the array. It must be a decrement, because
753 * simple increments never sleep.
754 * - If there are older (higher priority) decrements
755 * in the queue, then they have observed the original
756 * semval value and couldn't proceed. The operation
757 * decremented to value - thus they won't proceed either.
758 */
759 return 0;
760 }
761
762 /**
763 * wake_const_ops - wake up non-alter tasks
764 * @sma: semaphore array.
765 * @semnum: semaphore that was modified.
766 * @pt: list head for the tasks that must be woken up.
767 *
768 * wake_const_ops must be called after a semaphore in a semaphore array
769 * was set to 0. If complex const operations are pending, wake_const_ops must
770 * be called with semnum = -1, as well as with the number of each modified
771 * semaphore.
772 * The tasks that must be woken up are added to @pt. The return code
773 * is stored in q->pid.
774 * The function returns 1 if at least one operation was completed successfully.
775 */
776 static int wake_const_ops(struct sem_array *sma, int semnum,
777 struct list_head *pt)
778 {
779 struct sem_queue *q;
780 struct list_head *walk;
781 struct list_head *pending_list;
782 int semop_completed = 0;
783
784 if (semnum == -1)
785 pending_list = &sma->pending_const;
786 else
787 pending_list = &sma->sem_base[semnum].pending_const;
788
789 walk = pending_list->next;
790 while (walk != pending_list) {
791 int error;
792
793 q = container_of(walk, struct sem_queue, list);
794 walk = walk->next;
795
796 error = perform_atomic_semop(sma, q);
797
798 if (error <= 0) {
799 /* operation completed, remove from queue & wakeup */
800
801 unlink_queue(sma, q);
802
803 wake_up_sem_queue_prepare(pt, q, error);
804 if (error == 0)
805 semop_completed = 1;
806 }
807 }
808 return semop_completed;
809 }
810
811 /**
812 * do_smart_wakeup_zero - wakeup all wait for zero tasks
813 * @sma: semaphore array
814 * @sops: operations that were performed
815 * @nsops: number of operations
816 * @pt: list head of the tasks that must be woken up.
817 *
818 * Checks all required queue for wait-for-zero operations, based
819 * on the actual changes that were performed on the semaphore array.
820 * The function returns 1 if at least one operation was completed successfully.
821 */
822 static int do_smart_wakeup_zero(struct sem_array *sma, struct sembuf *sops,
823 int nsops, struct list_head *pt)
824 {
825 int i;
826 int semop_completed = 0;
827 int got_zero = 0;
828
829 /* first: the per-semaphore queues, if known */
830 if (sops) {
831 for (i = 0; i < nsops; i++) {
832 int num = sops[i].sem_num;
833
834 if (sma->sem_base[num].semval == 0) {
835 got_zero = 1;
836 semop_completed |= wake_const_ops(sma, num, pt);
837 }
838 }
839 } else {
840 /*
841 * No sops means modified semaphores not known.
842 * Assume all were changed.
843 */
844 for (i = 0; i < sma->sem_nsems; i++) {
845 if (sma->sem_base[i].semval == 0) {
846 got_zero = 1;
847 semop_completed |= wake_const_ops(sma, i, pt);
848 }
849 }
850 }
851 /*
852 * If one of the modified semaphores got 0,
853 * then check the global queue, too.
854 */
855 if (got_zero)
856 semop_completed |= wake_const_ops(sma, -1, pt);
857
858 return semop_completed;
859 }
860
861
862 /**
863 * update_queue - look for tasks that can be completed.
864 * @sma: semaphore array.
865 * @semnum: semaphore that was modified.
866 * @pt: list head for the tasks that must be woken up.
867 *
868 * update_queue must be called after a semaphore in a semaphore array
869 * was modified. If multiple semaphores were modified, update_queue must
870 * be called with semnum = -1, as well as with the number of each modified
871 * semaphore.
872 * The tasks that must be woken up are added to @pt. The return code
873 * is stored in q->pid.
874 * The function internally checks if const operations can now succeed.
875 *
876 * The function return 1 if at least one semop was completed successfully.
877 */
878 static int update_queue(struct sem_array *sma, int semnum, struct list_head *pt)
879 {
880 struct sem_queue *q;
881 struct list_head *walk;
882 struct list_head *pending_list;
883 int semop_completed = 0;
884
885 if (semnum == -1)
886 pending_list = &sma->pending_alter;
887 else
888 pending_list = &sma->sem_base[semnum].pending_alter;
889
890 again:
891 walk = pending_list->next;
892 while (walk != pending_list) {
893 int error, restart;
894
895 q = container_of(walk, struct sem_queue, list);
896 walk = walk->next;
897
898 /* If we are scanning the single sop, per-semaphore list of
899 * one semaphore and that semaphore is 0, then it is not
900 * necessary to scan further: simple increments
901 * that affect only one entry succeed immediately and cannot
902 * be in the per semaphore pending queue, and decrements
903 * cannot be successful if the value is already 0.
904 */
905 if (semnum != -1 && sma->sem_base[semnum].semval == 0)
906 break;
907
908 error = perform_atomic_semop(sma, q);
909
910 /* Does q->sleeper still need to sleep? */
911 if (error > 0)
912 continue;
913
914 unlink_queue(sma, q);
915
916 if (error) {
917 restart = 0;
918 } else {
919 semop_completed = 1;
920 do_smart_wakeup_zero(sma, q->sops, q->nsops, pt);
921 restart = check_restart(sma, q);
922 }
923
924 wake_up_sem_queue_prepare(pt, q, error);
925 if (restart)
926 goto again;
927 }
928 return semop_completed;
929 }
930
931 /**
932 * set_semotime - set sem_otime
933 * @sma: semaphore array
934 * @sops: operations that modified the array, may be NULL
935 *
936 * sem_otime is replicated to avoid cache line trashing.
937 * This function sets one instance to the current time.
938 */
939 static void set_semotime(struct sem_array *sma, struct sembuf *sops)
940 {
941 if (sops == NULL) {
942 sma->sem_base[0].sem_otime = get_seconds();
943 } else {
944 sma->sem_base[sops[0].sem_num].sem_otime =
945 get_seconds();
946 }
947 }
948
949 /**
950 * do_smart_update - optimized update_queue
951 * @sma: semaphore array
952 * @sops: operations that were performed
953 * @nsops: number of operations
954 * @otime: force setting otime
955 * @pt: list head of the tasks that must be woken up.
956 *
957 * do_smart_update() does the required calls to update_queue and wakeup_zero,
958 * based on the actual changes that were performed on the semaphore array.
959 * Note that the function does not do the actual wake-up: the caller is
960 * responsible for calling wake_up_sem_queue_do(@pt).
961 * It is safe to perform this call after dropping all locks.
962 */
963 static void do_smart_update(struct sem_array *sma, struct sembuf *sops, int nsops,
964 int otime, struct list_head *pt)
965 {
966 int i;
967
968 otime |= do_smart_wakeup_zero(sma, sops, nsops, pt);
969
970 if (!list_empty(&sma->pending_alter)) {
971 /* semaphore array uses the global queue - just process it. */
972 otime |= update_queue(sma, -1, pt);
973 } else {
974 if (!sops) {
975 /*
976 * No sops, thus the modified semaphores are not
977 * known. Check all.
978 */
979 for (i = 0; i < sma->sem_nsems; i++)
980 otime |= update_queue(sma, i, pt);
981 } else {
982 /*
983 * Check the semaphores that were increased:
984 * - No complex ops, thus all sleeping ops are
985 * decrease.
986 * - if we decreased the value, then any sleeping
987 * semaphore ops wont be able to run: If the
988 * previous value was too small, then the new
989 * value will be too small, too.
990 */
991 for (i = 0; i < nsops; i++) {
992 if (sops[i].sem_op > 0) {
993 otime |= update_queue(sma,
994 sops[i].sem_num, pt);
995 }
996 }
997 }
998 }
999 if (otime)
1000 set_semotime(sma, sops);
1001 }
1002
1003 /*
1004 * check_qop: Test if a queued operation sleeps on the semaphore semnum
1005 */
1006 static int check_qop(struct sem_array *sma, int semnum, struct sem_queue *q,
1007 bool count_zero)
1008 {
1009 struct sembuf *sop = q->blocking;
1010
1011 /*
1012 * Linux always (since 0.99.10) reported a task as sleeping on all
1013 * semaphores. This violates SUS, therefore it was changed to the
1014 * standard compliant behavior.
1015 * Give the administrators a chance to notice that an application
1016 * might misbehave because it relies on the Linux behavior.
1017 */
1018 pr_info_once("semctl(GETNCNT/GETZCNT) is since 3.16 Single Unix Specification compliant.\n"
1019 "The task %s (%d) triggered the difference, watch for misbehavior.\n",
1020 current->comm, task_pid_nr(current));
1021
1022 if (sop->sem_num != semnum)
1023 return 0;
1024
1025 if (count_zero && sop->sem_op == 0)
1026 return 1;
1027 if (!count_zero && sop->sem_op < 0)
1028 return 1;
1029
1030 return 0;
1031 }
1032
1033 /* The following counts are associated to each semaphore:
1034 * semncnt number of tasks waiting on semval being nonzero
1035 * semzcnt number of tasks waiting on semval being zero
1036 *
1037 * Per definition, a task waits only on the semaphore of the first semop
1038 * that cannot proceed, even if additional operation would block, too.
1039 */
1040 static int count_semcnt(struct sem_array *sma, ushort semnum,
1041 bool count_zero)
1042 {
1043 struct list_head *l;
1044 struct sem_queue *q;
1045 int semcnt;
1046
1047 semcnt = 0;
1048 /* First: check the simple operations. They are easy to evaluate */
1049 if (count_zero)
1050 l = &sma->sem_base[semnum].pending_const;
1051 else
1052 l = &sma->sem_base[semnum].pending_alter;
1053
1054 list_for_each_entry(q, l, list) {
1055 /* all task on a per-semaphore list sleep on exactly
1056 * that semaphore
1057 */
1058 semcnt++;
1059 }
1060
1061 /* Then: check the complex operations. */
1062 list_for_each_entry(q, &sma->pending_alter, list) {
1063 semcnt += check_qop(sma, semnum, q, count_zero);
1064 }
1065 if (count_zero) {
1066 list_for_each_entry(q, &sma->pending_const, list) {
1067 semcnt += check_qop(sma, semnum, q, count_zero);
1068 }
1069 }
1070 return semcnt;
1071 }
1072
1073 /* Free a semaphore set. freeary() is called with sem_ids.rwsem locked
1074 * as a writer and the spinlock for this semaphore set hold. sem_ids.rwsem
1075 * remains locked on exit.
1076 */
1077 static void freeary(struct ipc_namespace *ns, struct kern_ipc_perm *ipcp)
1078 {
1079 struct sem_undo *un, *tu;
1080 struct sem_queue *q, *tq;
1081 struct sem_array *sma = container_of(ipcp, struct sem_array, sem_perm);
1082 struct list_head tasks;
1083 int i;
1084
1085 /* Free the existing undo structures for this semaphore set. */
1086 ipc_assert_locked_object(&sma->sem_perm);
1087 list_for_each_entry_safe(un, tu, &sma->list_id, list_id) {
1088 list_del(&un->list_id);
1089 spin_lock(&un->ulp->lock);
1090 un->semid = -1;
1091 list_del_rcu(&un->list_proc);
1092 spin_unlock(&un->ulp->lock);
1093 kfree_rcu(un, rcu);
1094 }
1095
1096 /* Wake up all pending processes and let them fail with EIDRM. */
1097 INIT_LIST_HEAD(&tasks);
1098 list_for_each_entry_safe(q, tq, &sma->pending_const, list) {
1099 unlink_queue(sma, q);
1100 wake_up_sem_queue_prepare(&tasks, q, -EIDRM);
1101 }
1102
1103 list_for_each_entry_safe(q, tq, &sma->pending_alter, list) {
1104 unlink_queue(sma, q);
1105 wake_up_sem_queue_prepare(&tasks, q, -EIDRM);
1106 }
1107 for (i = 0; i < sma->sem_nsems; i++) {
1108 struct sem *sem = sma->sem_base + i;
1109 list_for_each_entry_safe(q, tq, &sem->pending_const, list) {
1110 unlink_queue(sma, q);
1111 wake_up_sem_queue_prepare(&tasks, q, -EIDRM);
1112 }
1113 list_for_each_entry_safe(q, tq, &sem->pending_alter, list) {
1114 unlink_queue(sma, q);
1115 wake_up_sem_queue_prepare(&tasks, q, -EIDRM);
1116 }
1117 }
1118
1119 /* Remove the semaphore set from the IDR */
1120 sem_rmid(ns, sma);
1121 sem_unlock(sma, -1);
1122 rcu_read_unlock();
1123
1124 wake_up_sem_queue_do(&tasks);
1125 ns->used_sems -= sma->sem_nsems;
1126 ipc_rcu_putref(sma, sem_rcu_free);
1127 }
1128
1129 static unsigned long copy_semid_to_user(void __user *buf, struct semid64_ds *in, int version)
1130 {
1131 switch (version) {
1132 case IPC_64:
1133 return copy_to_user(buf, in, sizeof(*in));
1134 case IPC_OLD:
1135 {
1136 struct semid_ds out;
1137
1138 memset(&out, 0, sizeof(out));
1139
1140 ipc64_perm_to_ipc_perm(&in->sem_perm, &out.sem_perm);
1141
1142 out.sem_otime = in->sem_otime;
1143 out.sem_ctime = in->sem_ctime;
1144 out.sem_nsems = in->sem_nsems;
1145
1146 return copy_to_user(buf, &out, sizeof(out));
1147 }
1148 default:
1149 return -EINVAL;
1150 }
1151 }
1152
1153 static time_t get_semotime(struct sem_array *sma)
1154 {
1155 int i;
1156 time_t res;
1157
1158 res = sma->sem_base[0].sem_otime;
1159 for (i = 1; i < sma->sem_nsems; i++) {
1160 time_t to = sma->sem_base[i].sem_otime;
1161
1162 if (to > res)
1163 res = to;
1164 }
1165 return res;
1166 }
1167
1168 static int semctl_nolock(struct ipc_namespace *ns, int semid,
1169 int cmd, int version, void __user *p)
1170 {
1171 int err;
1172 struct sem_array *sma;
1173
1174 switch (cmd) {
1175 case IPC_INFO:
1176 case SEM_INFO:
1177 {
1178 struct seminfo seminfo;
1179 int max_id;
1180
1181 err = security_sem_semctl(NULL, cmd);
1182 if (err)
1183 return err;
1184
1185 memset(&seminfo, 0, sizeof(seminfo));
1186 seminfo.semmni = ns->sc_semmni;
1187 seminfo.semmns = ns->sc_semmns;
1188 seminfo.semmsl = ns->sc_semmsl;
1189 seminfo.semopm = ns->sc_semopm;
1190 seminfo.semvmx = SEMVMX;
1191 seminfo.semmnu = SEMMNU;
1192 seminfo.semmap = SEMMAP;
1193 seminfo.semume = SEMUME;
1194 down_read(&sem_ids(ns).rwsem);
1195 if (cmd == SEM_INFO) {
1196 seminfo.semusz = sem_ids(ns).in_use;
1197 seminfo.semaem = ns->used_sems;
1198 } else {
1199 seminfo.semusz = SEMUSZ;
1200 seminfo.semaem = SEMAEM;
1201 }
1202 max_id = ipc_get_maxid(&sem_ids(ns));
1203 up_read(&sem_ids(ns).rwsem);
1204 if (copy_to_user(p, &seminfo, sizeof(struct seminfo)))
1205 return -EFAULT;
1206 return (max_id < 0) ? 0 : max_id;
1207 }
1208 case IPC_STAT:
1209 case SEM_STAT:
1210 {
1211 struct semid64_ds tbuf;
1212 int id = 0;
1213
1214 memset(&tbuf, 0, sizeof(tbuf));
1215
1216 rcu_read_lock();
1217 if (cmd == SEM_STAT) {
1218 sma = sem_obtain_object(ns, semid);
1219 if (IS_ERR(sma)) {
1220 err = PTR_ERR(sma);
1221 goto out_unlock;
1222 }
1223 id = sma->sem_perm.id;
1224 } else {
1225 sma = sem_obtain_object_check(ns, semid);
1226 if (IS_ERR(sma)) {
1227 err = PTR_ERR(sma);
1228 goto out_unlock;
1229 }
1230 }
1231
1232 err = -EACCES;
1233 if (ipcperms(ns, &sma->sem_perm, S_IRUGO))
1234 goto out_unlock;
1235
1236 err = security_sem_semctl(sma, cmd);
1237 if (err)
1238 goto out_unlock;
1239
1240 kernel_to_ipc64_perm(&sma->sem_perm, &tbuf.sem_perm);
1241 tbuf.sem_otime = get_semotime(sma);
1242 tbuf.sem_ctime = sma->sem_ctime;
1243 tbuf.sem_nsems = sma->sem_nsems;
1244 rcu_read_unlock();
1245 if (copy_semid_to_user(p, &tbuf, version))
1246 return -EFAULT;
1247 return id;
1248 }
1249 default:
1250 return -EINVAL;
1251 }
1252 out_unlock:
1253 rcu_read_unlock();
1254 return err;
1255 }
1256
1257 static int semctl_setval(struct ipc_namespace *ns, int semid, int semnum,
1258 unsigned long arg)
1259 {
1260 struct sem_undo *un;
1261 struct sem_array *sma;
1262 struct sem *curr;
1263 int err;
1264 struct list_head tasks;
1265 int val;
1266 #if defined(CONFIG_64BIT) && defined(__BIG_ENDIAN)
1267 /* big-endian 64bit */
1268 val = arg >> 32;
1269 #else
1270 /* 32bit or little-endian 64bit */
1271 val = arg;
1272 #endif
1273
1274 if (val > SEMVMX || val < 0)
1275 return -ERANGE;
1276
1277 INIT_LIST_HEAD(&tasks);
1278
1279 rcu_read_lock();
1280 sma = sem_obtain_object_check(ns, semid);
1281 if (IS_ERR(sma)) {
1282 rcu_read_unlock();
1283 return PTR_ERR(sma);
1284 }
1285
1286 if (semnum < 0 || semnum >= sma->sem_nsems) {
1287 rcu_read_unlock();
1288 return -EINVAL;
1289 }
1290
1291
1292 if (ipcperms(ns, &sma->sem_perm, S_IWUGO)) {
1293 rcu_read_unlock();
1294 return -EACCES;
1295 }
1296
1297 err = security_sem_semctl(sma, SETVAL);
1298 if (err) {
1299 rcu_read_unlock();
1300 return -EACCES;
1301 }
1302
1303 sem_lock(sma, NULL, -1);
1304
1305 if (!ipc_valid_object(&sma->sem_perm)) {
1306 sem_unlock(sma, -1);
1307 rcu_read_unlock();
1308 return -EIDRM;
1309 }
1310
1311 curr = &sma->sem_base[semnum];
1312
1313 ipc_assert_locked_object(&sma->sem_perm);
1314 list_for_each_entry(un, &sma->list_id, list_id)
1315 un->semadj[semnum] = 0;
1316
1317 curr->semval = val;
1318 curr->sempid = task_tgid_vnr(current);
1319 sma->sem_ctime = get_seconds();
1320 /* maybe some queued-up processes were waiting for this */
1321 do_smart_update(sma, NULL, 0, 0, &tasks);
1322 sem_unlock(sma, -1);
1323 rcu_read_unlock();
1324 wake_up_sem_queue_do(&tasks);
1325 return 0;
1326 }
1327
1328 static int semctl_main(struct ipc_namespace *ns, int semid, int semnum,
1329 int cmd, void __user *p)
1330 {
1331 struct sem_array *sma;
1332 struct sem *curr;
1333 int err, nsems;
1334 ushort fast_sem_io[SEMMSL_FAST];
1335 ushort *sem_io = fast_sem_io;
1336 struct list_head tasks;
1337
1338 INIT_LIST_HEAD(&tasks);
1339
1340 rcu_read_lock();
1341 sma = sem_obtain_object_check(ns, semid);
1342 if (IS_ERR(sma)) {
1343 rcu_read_unlock();
1344 return PTR_ERR(sma);
1345 }
1346
1347 nsems = sma->sem_nsems;
1348
1349 err = -EACCES;
1350 if (ipcperms(ns, &sma->sem_perm, cmd == SETALL ? S_IWUGO : S_IRUGO))
1351 goto out_rcu_wakeup;
1352
1353 err = security_sem_semctl(sma, cmd);
1354 if (err)
1355 goto out_rcu_wakeup;
1356
1357 err = -EACCES;
1358 switch (cmd) {
1359 case GETALL:
1360 {
1361 ushort __user *array = p;
1362 int i;
1363
1364 sem_lock(sma, NULL, -1);
1365 if (!ipc_valid_object(&sma->sem_perm)) {
1366 err = -EIDRM;
1367 goto out_unlock;
1368 }
1369 if (nsems > SEMMSL_FAST) {
1370 if (!ipc_rcu_getref(sma)) {
1371 err = -EIDRM;
1372 goto out_unlock;
1373 }
1374 sem_unlock(sma, -1);
1375 rcu_read_unlock();
1376 sem_io = ipc_alloc(sizeof(ushort)*nsems);
1377 if (sem_io == NULL) {
1378 ipc_rcu_putref(sma, ipc_rcu_free);
1379 return -ENOMEM;
1380 }
1381
1382 rcu_read_lock();
1383 sem_lock_and_putref(sma);
1384 if (!ipc_valid_object(&sma->sem_perm)) {
1385 err = -EIDRM;
1386 goto out_unlock;
1387 }
1388 }
1389 for (i = 0; i < sma->sem_nsems; i++)
1390 sem_io[i] = sma->sem_base[i].semval;
1391 sem_unlock(sma, -1);
1392 rcu_read_unlock();
1393 err = 0;
1394 if (copy_to_user(array, sem_io, nsems*sizeof(ushort)))
1395 err = -EFAULT;
1396 goto out_free;
1397 }
1398 case SETALL:
1399 {
1400 int i;
1401 struct sem_undo *un;
1402
1403 if (!ipc_rcu_getref(sma)) {
1404 err = -EIDRM;
1405 goto out_rcu_wakeup;
1406 }
1407 rcu_read_unlock();
1408
1409 if (nsems > SEMMSL_FAST) {
1410 sem_io = ipc_alloc(sizeof(ushort)*nsems);
1411 if (sem_io == NULL) {
1412 ipc_rcu_putref(sma, ipc_rcu_free);
1413 return -ENOMEM;
1414 }
1415 }
1416
1417 if (copy_from_user(sem_io, p, nsems*sizeof(ushort))) {
1418 ipc_rcu_putref(sma, ipc_rcu_free);
1419 err = -EFAULT;
1420 goto out_free;
1421 }
1422
1423 for (i = 0; i < nsems; i++) {
1424 if (sem_io[i] > SEMVMX) {
1425 ipc_rcu_putref(sma, ipc_rcu_free);
1426 err = -ERANGE;
1427 goto out_free;
1428 }
1429 }
1430 rcu_read_lock();
1431 sem_lock_and_putref(sma);
1432 if (!ipc_valid_object(&sma->sem_perm)) {
1433 err = -EIDRM;
1434 goto out_unlock;
1435 }
1436
1437 for (i = 0; i < nsems; i++)
1438 sma->sem_base[i].semval = sem_io[i];
1439
1440 ipc_assert_locked_object(&sma->sem_perm);
1441 list_for_each_entry(un, &sma->list_id, list_id) {
1442 for (i = 0; i < nsems; i++)
1443 un->semadj[i] = 0;
1444 }
1445 sma->sem_ctime = get_seconds();
1446 /* maybe some queued-up processes were waiting for this */
1447 do_smart_update(sma, NULL, 0, 0, &tasks);
1448 err = 0;
1449 goto out_unlock;
1450 }
1451 /* GETVAL, GETPID, GETNCTN, GETZCNT: fall-through */
1452 }
1453 err = -EINVAL;
1454 if (semnum < 0 || semnum >= nsems)
1455 goto out_rcu_wakeup;
1456
1457 sem_lock(sma, NULL, -1);
1458 if (!ipc_valid_object(&sma->sem_perm)) {
1459 err = -EIDRM;
1460 goto out_unlock;
1461 }
1462 curr = &sma->sem_base[semnum];
1463
1464 switch (cmd) {
1465 case GETVAL:
1466 err = curr->semval;
1467 goto out_unlock;
1468 case GETPID:
1469 err = curr->sempid;
1470 goto out_unlock;
1471 case GETNCNT:
1472 err = count_semcnt(sma, semnum, 0);
1473 goto out_unlock;
1474 case GETZCNT:
1475 err = count_semcnt(sma, semnum, 1);
1476 goto out_unlock;
1477 }
1478
1479 out_unlock:
1480 sem_unlock(sma, -1);
1481 out_rcu_wakeup:
1482 rcu_read_unlock();
1483 wake_up_sem_queue_do(&tasks);
1484 out_free:
1485 if (sem_io != fast_sem_io)
1486 ipc_free(sem_io, sizeof(ushort)*nsems);
1487 return err;
1488 }
1489
1490 static inline unsigned long
1491 copy_semid_from_user(struct semid64_ds *out, void __user *buf, int version)
1492 {
1493 switch (version) {
1494 case IPC_64:
1495 if (copy_from_user(out, buf, sizeof(*out)))
1496 return -EFAULT;
1497 return 0;
1498 case IPC_OLD:
1499 {
1500 struct semid_ds tbuf_old;
1501
1502 if (copy_from_user(&tbuf_old, buf, sizeof(tbuf_old)))
1503 return -EFAULT;
1504
1505 out->sem_perm.uid = tbuf_old.sem_perm.uid;
1506 out->sem_perm.gid = tbuf_old.sem_perm.gid;
1507 out->sem_perm.mode = tbuf_old.sem_perm.mode;
1508
1509 return 0;
1510 }
1511 default:
1512 return -EINVAL;
1513 }
1514 }
1515
1516 /*
1517 * This function handles some semctl commands which require the rwsem
1518 * to be held in write mode.
1519 * NOTE: no locks must be held, the rwsem is taken inside this function.
1520 */
1521 static int semctl_down(struct ipc_namespace *ns, int semid,
1522 int cmd, int version, void __user *p)
1523 {
1524 struct sem_array *sma;
1525 int err;
1526 struct semid64_ds semid64;
1527 struct kern_ipc_perm *ipcp;
1528
1529 if (cmd == IPC_SET) {
1530 if (copy_semid_from_user(&semid64, p, version))
1531 return -EFAULT;
1532 }
1533
1534 down_write(&sem_ids(ns).rwsem);
1535 rcu_read_lock();
1536
1537 ipcp = ipcctl_pre_down_nolock(ns, &sem_ids(ns), semid, cmd,
1538 &semid64.sem_perm, 0);
1539 if (IS_ERR(ipcp)) {
1540 err = PTR_ERR(ipcp);
1541 goto out_unlock1;
1542 }
1543
1544 sma = container_of(ipcp, struct sem_array, sem_perm);
1545
1546 err = security_sem_semctl(sma, cmd);
1547 if (err)
1548 goto out_unlock1;
1549
1550 switch (cmd) {
1551 case IPC_RMID:
1552 sem_lock(sma, NULL, -1);
1553 /* freeary unlocks the ipc object and rcu */
1554 freeary(ns, ipcp);
1555 goto out_up;
1556 case IPC_SET:
1557 sem_lock(sma, NULL, -1);
1558 err = ipc_update_perm(&semid64.sem_perm, ipcp);
1559 if (err)
1560 goto out_unlock0;
1561 sma->sem_ctime = get_seconds();
1562 break;
1563 default:
1564 err = -EINVAL;
1565 goto out_unlock1;
1566 }
1567
1568 out_unlock0:
1569 sem_unlock(sma, -1);
1570 out_unlock1:
1571 rcu_read_unlock();
1572 out_up:
1573 up_write(&sem_ids(ns).rwsem);
1574 return err;
1575 }
1576
1577 SYSCALL_DEFINE4(semctl, int, semid, int, semnum, int, cmd, unsigned long, arg)
1578 {
1579 int version;
1580 struct ipc_namespace *ns;
1581 void __user *p = (void __user *)arg;
1582
1583 if (semid < 0)
1584 return -EINVAL;
1585
1586 version = ipc_parse_version(&cmd);
1587 ns = current->nsproxy->ipc_ns;
1588
1589 switch (cmd) {
1590 case IPC_INFO:
1591 case SEM_INFO:
1592 case IPC_STAT:
1593 case SEM_STAT:
1594 return semctl_nolock(ns, semid, cmd, version, p);
1595 case GETALL:
1596 case GETVAL:
1597 case GETPID:
1598 case GETNCNT:
1599 case GETZCNT:
1600 case SETALL:
1601 return semctl_main(ns, semid, semnum, cmd, p);
1602 case SETVAL:
1603 return semctl_setval(ns, semid, semnum, arg);
1604 case IPC_RMID:
1605 case IPC_SET:
1606 return semctl_down(ns, semid, cmd, version, p);
1607 default:
1608 return -EINVAL;
1609 }
1610 }
1611
1612 /* If the task doesn't already have a undo_list, then allocate one
1613 * here. We guarantee there is only one thread using this undo list,
1614 * and current is THE ONE
1615 *
1616 * If this allocation and assignment succeeds, but later
1617 * portions of this code fail, there is no need to free the sem_undo_list.
1618 * Just let it stay associated with the task, and it'll be freed later
1619 * at exit time.
1620 *
1621 * This can block, so callers must hold no locks.
1622 */
1623 static inline int get_undo_list(struct sem_undo_list **undo_listp)
1624 {
1625 struct sem_undo_list *undo_list;
1626
1627 undo_list = current->sysvsem.undo_list;
1628 if (!undo_list) {
1629 undo_list = kzalloc(sizeof(*undo_list), GFP_KERNEL);
1630 if (undo_list == NULL)
1631 return -ENOMEM;
1632 spin_lock_init(&undo_list->lock);
1633 atomic_set(&undo_list->refcnt, 1);
1634 INIT_LIST_HEAD(&undo_list->list_proc);
1635
1636 current->sysvsem.undo_list = undo_list;
1637 }
1638 *undo_listp = undo_list;
1639 return 0;
1640 }
1641
1642 static struct sem_undo *__lookup_undo(struct sem_undo_list *ulp, int semid)
1643 {
1644 struct sem_undo *un;
1645
1646 list_for_each_entry_rcu(un, &ulp->list_proc, list_proc) {
1647 if (un->semid == semid)
1648 return un;
1649 }
1650 return NULL;
1651 }
1652
1653 static struct sem_undo *lookup_undo(struct sem_undo_list *ulp, int semid)
1654 {
1655 struct sem_undo *un;
1656
1657 assert_spin_locked(&ulp->lock);
1658
1659 un = __lookup_undo(ulp, semid);
1660 if (un) {
1661 list_del_rcu(&un->list_proc);
1662 list_add_rcu(&un->list_proc, &ulp->list_proc);
1663 }
1664 return un;
1665 }
1666
1667 /**
1668 * find_alloc_undo - lookup (and if not present create) undo array
1669 * @ns: namespace
1670 * @semid: semaphore array id
1671 *
1672 * The function looks up (and if not present creates) the undo structure.
1673 * The size of the undo structure depends on the size of the semaphore
1674 * array, thus the alloc path is not that straightforward.
1675 * Lifetime-rules: sem_undo is rcu-protected, on success, the function
1676 * performs a rcu_read_lock().
1677 */
1678 static struct sem_undo *find_alloc_undo(struct ipc_namespace *ns, int semid)
1679 {
1680 struct sem_array *sma;
1681 struct sem_undo_list *ulp;
1682 struct sem_undo *un, *new;
1683 int nsems, error;
1684
1685 error = get_undo_list(&ulp);
1686 if (error)
1687 return ERR_PTR(error);
1688
1689 rcu_read_lock();
1690 spin_lock(&ulp->lock);
1691 un = lookup_undo(ulp, semid);
1692 spin_unlock(&ulp->lock);
1693 if (likely(un != NULL))
1694 goto out;
1695
1696 /* no undo structure around - allocate one. */
1697 /* step 1: figure out the size of the semaphore array */
1698 sma = sem_obtain_object_check(ns, semid);
1699 if (IS_ERR(sma)) {
1700 rcu_read_unlock();
1701 return ERR_CAST(sma);
1702 }
1703
1704 nsems = sma->sem_nsems;
1705 if (!ipc_rcu_getref(sma)) {
1706 rcu_read_unlock();
1707 un = ERR_PTR(-EIDRM);
1708 goto out;
1709 }
1710 rcu_read_unlock();
1711
1712 /* step 2: allocate new undo structure */
1713 new = kzalloc(sizeof(struct sem_undo) + sizeof(short)*nsems, GFP_KERNEL);
1714 if (!new) {
1715 ipc_rcu_putref(sma, ipc_rcu_free);
1716 return ERR_PTR(-ENOMEM);
1717 }
1718
1719 /* step 3: Acquire the lock on semaphore array */
1720 rcu_read_lock();
1721 sem_lock_and_putref(sma);
1722 if (!ipc_valid_object(&sma->sem_perm)) {
1723 sem_unlock(sma, -1);
1724 rcu_read_unlock();
1725 kfree(new);
1726 un = ERR_PTR(-EIDRM);
1727 goto out;
1728 }
1729 spin_lock(&ulp->lock);
1730
1731 /*
1732 * step 4: check for races: did someone else allocate the undo struct?
1733 */
1734 un = lookup_undo(ulp, semid);
1735 if (un) {
1736 kfree(new);
1737 goto success;
1738 }
1739 /* step 5: initialize & link new undo structure */
1740 new->semadj = (short *) &new[1];
1741 new->ulp = ulp;
1742 new->semid = semid;
1743 assert_spin_locked(&ulp->lock);
1744 list_add_rcu(&new->list_proc, &ulp->list_proc);
1745 ipc_assert_locked_object(&sma->sem_perm);
1746 list_add(&new->list_id, &sma->list_id);
1747 un = new;
1748
1749 success:
1750 spin_unlock(&ulp->lock);
1751 sem_unlock(sma, -1);
1752 out:
1753 return un;
1754 }
1755
1756
1757 /**
1758 * get_queue_result - retrieve the result code from sem_queue
1759 * @q: Pointer to queue structure
1760 *
1761 * Retrieve the return code from the pending queue. If IN_WAKEUP is found in
1762 * q->status, then we must loop until the value is replaced with the final
1763 * value: This may happen if a task is woken up by an unrelated event (e.g.
1764 * signal) and in parallel the task is woken up by another task because it got
1765 * the requested semaphores.
1766 *
1767 * The function can be called with or without holding the semaphore spinlock.
1768 */
1769 static int get_queue_result(struct sem_queue *q)
1770 {
1771 int error;
1772
1773 error = q->status;
1774 while (unlikely(error == IN_WAKEUP)) {
1775 cpu_relax();
1776 error = q->status;
1777 }
1778
1779 return error;
1780 }
1781
1782 SYSCALL_DEFINE4(semtimedop, int, semid, struct sembuf __user *, tsops,
1783 unsigned, nsops, const struct timespec __user *, timeout)
1784 {
1785 int error = -EINVAL;
1786 struct sem_array *sma;
1787 struct sembuf fast_sops[SEMOPM_FAST];
1788 struct sembuf *sops = fast_sops, *sop;
1789 struct sem_undo *un;
1790 int undos = 0, alter = 0, max, locknum;
1791 struct sem_queue queue;
1792 unsigned long jiffies_left = 0;
1793 struct ipc_namespace *ns;
1794 struct list_head tasks;
1795
1796 ns = current->nsproxy->ipc_ns;
1797
1798 if (nsops < 1 || semid < 0)
1799 return -EINVAL;
1800 if (nsops > ns->sc_semopm)
1801 return -E2BIG;
1802 if (nsops > SEMOPM_FAST) {
1803 sops = kmalloc(sizeof(*sops)*nsops, GFP_KERNEL);
1804 if (sops == NULL)
1805 return -ENOMEM;
1806 }
1807 if (copy_from_user(sops, tsops, nsops * sizeof(*tsops))) {
1808 error = -EFAULT;
1809 goto out_free;
1810 }
1811 if (timeout) {
1812 struct timespec _timeout;
1813 if (copy_from_user(&_timeout, timeout, sizeof(*timeout))) {
1814 error = -EFAULT;
1815 goto out_free;
1816 }
1817 if (_timeout.tv_sec < 0 || _timeout.tv_nsec < 0 ||
1818 _timeout.tv_nsec >= 1000000000L) {
1819 error = -EINVAL;
1820 goto out_free;
1821 }
1822 jiffies_left = timespec_to_jiffies(&_timeout);
1823 }
1824 max = 0;
1825 for (sop = sops; sop < sops + nsops; sop++) {
1826 if (sop->sem_num >= max)
1827 max = sop->sem_num;
1828 if (sop->sem_flg & SEM_UNDO)
1829 undos = 1;
1830 if (sop->sem_op != 0)
1831 alter = 1;
1832 }
1833
1834 INIT_LIST_HEAD(&tasks);
1835
1836 if (undos) {
1837 /* On success, find_alloc_undo takes the rcu_read_lock */
1838 un = find_alloc_undo(ns, semid);
1839 if (IS_ERR(un)) {
1840 error = PTR_ERR(un);
1841 goto out_free;
1842 }
1843 } else {
1844 un = NULL;
1845 rcu_read_lock();
1846 }
1847
1848 sma = sem_obtain_object_check(ns, semid);
1849 if (IS_ERR(sma)) {
1850 rcu_read_unlock();
1851 error = PTR_ERR(sma);
1852 goto out_free;
1853 }
1854
1855 error = -EFBIG;
1856 if (max >= sma->sem_nsems)
1857 goto out_rcu_wakeup;
1858
1859 error = -EACCES;
1860 if (ipcperms(ns, &sma->sem_perm, alter ? S_IWUGO : S_IRUGO))
1861 goto out_rcu_wakeup;
1862
1863 error = security_sem_semop(sma, sops, nsops, alter);
1864 if (error)
1865 goto out_rcu_wakeup;
1866
1867 error = -EIDRM;
1868 locknum = sem_lock(sma, sops, nsops);
1869 /*
1870 * We eventually might perform the following check in a lockless
1871 * fashion, considering ipc_valid_object() locking constraints.
1872 * If nsops == 1 and there is no contention for sem_perm.lock, then
1873 * only a per-semaphore lock is held and it's OK to proceed with the
1874 * check below. More details on the fine grained locking scheme
1875 * entangled here and why it's RMID race safe on comments at sem_lock()
1876 */
1877 if (!ipc_valid_object(&sma->sem_perm))
1878 goto out_unlock_free;
1879 /*
1880 * semid identifiers are not unique - find_alloc_undo may have
1881 * allocated an undo structure, it was invalidated by an RMID
1882 * and now a new array with received the same id. Check and fail.
1883 * This case can be detected checking un->semid. The existence of
1884 * "un" itself is guaranteed by rcu.
1885 */
1886 if (un && un->semid == -1)
1887 goto out_unlock_free;
1888
1889 queue.sops = sops;
1890 queue.nsops = nsops;
1891 queue.undo = un;
1892 queue.pid = task_tgid_vnr(current);
1893 queue.alter = alter;
1894
1895 error = perform_atomic_semop(sma, &queue);
1896 if (error == 0) {
1897 /* If the operation was successful, then do
1898 * the required updates.
1899 */
1900 if (alter)
1901 do_smart_update(sma, sops, nsops, 1, &tasks);
1902 else
1903 set_semotime(sma, sops);
1904 }
1905 if (error <= 0)
1906 goto out_unlock_free;
1907
1908 /* We need to sleep on this operation, so we put the current
1909 * task into the pending queue and go to sleep.
1910 */
1911
1912 if (nsops == 1) {
1913 struct sem *curr;
1914 curr = &sma->sem_base[sops->sem_num];
1915
1916 if (alter) {
1917 if (sma->complex_count) {
1918 list_add_tail(&queue.list,
1919 &sma->pending_alter);
1920 } else {
1921
1922 list_add_tail(&queue.list,
1923 &curr->pending_alter);
1924 }
1925 } else {
1926 list_add_tail(&queue.list, &curr->pending_const);
1927 }
1928 } else {
1929 if (!sma->complex_count)
1930 merge_queues(sma);
1931
1932 if (alter)
1933 list_add_tail(&queue.list, &sma->pending_alter);
1934 else
1935 list_add_tail(&queue.list, &sma->pending_const);
1936
1937 sma->complex_count++;
1938 }
1939
1940 queue.status = -EINTR;
1941 queue.sleeper = current;
1942
1943 sleep_again:
1944 __set_current_state(TASK_INTERRUPTIBLE);
1945 sem_unlock(sma, locknum);
1946 rcu_read_unlock();
1947
1948 if (timeout)
1949 jiffies_left = schedule_timeout(jiffies_left);
1950 else
1951 schedule();
1952
1953 error = get_queue_result(&queue);
1954
1955 if (error != -EINTR) {
1956 /* fast path: update_queue already obtained all requested
1957 * resources.
1958 * Perform a smp_mb(): User space could assume that semop()
1959 * is a memory barrier: Without the mb(), the cpu could
1960 * speculatively read in user space stale data that was
1961 * overwritten by the previous owner of the semaphore.
1962 */
1963 smp_mb();
1964
1965 goto out_free;
1966 }
1967
1968 rcu_read_lock();
1969 sma = sem_obtain_lock(ns, semid, sops, nsops, &locknum);
1970
1971 /*
1972 * Wait until it's guaranteed that no wakeup_sem_queue_do() is ongoing.
1973 */
1974 error = get_queue_result(&queue);
1975
1976 /*
1977 * Array removed? If yes, leave without sem_unlock().
1978 */
1979 if (IS_ERR(sma)) {
1980 rcu_read_unlock();
1981 goto out_free;
1982 }
1983
1984
1985 /*
1986 * If queue.status != -EINTR we are woken up by another process.
1987 * Leave without unlink_queue(), but with sem_unlock().
1988 */
1989 if (error != -EINTR)
1990 goto out_unlock_free;
1991
1992 /*
1993 * If an interrupt occurred we have to clean up the queue
1994 */
1995 if (timeout && jiffies_left == 0)
1996 error = -EAGAIN;
1997
1998 /*
1999 * If the wakeup was spurious, just retry
2000 */
2001 if (error == -EINTR && !signal_pending(current))
2002 goto sleep_again;
2003
2004 unlink_queue(sma, &queue);
2005
2006 out_unlock_free:
2007 sem_unlock(sma, locknum);
2008 out_rcu_wakeup:
2009 rcu_read_unlock();
2010 wake_up_sem_queue_do(&tasks);
2011 out_free:
2012 if (sops != fast_sops)
2013 kfree(sops);
2014 return error;
2015 }
2016
2017 SYSCALL_DEFINE3(semop, int, semid, struct sembuf __user *, tsops,
2018 unsigned, nsops)
2019 {
2020 return sys_semtimedop(semid, tsops, nsops, NULL);
2021 }
2022
2023 /* If CLONE_SYSVSEM is set, establish sharing of SEM_UNDO state between
2024 * parent and child tasks.
2025 */
2026
2027 int copy_semundo(unsigned long clone_flags, struct task_struct *tsk)
2028 {
2029 struct sem_undo_list *undo_list;
2030 int error;
2031
2032 if (clone_flags & CLONE_SYSVSEM) {
2033 error = get_undo_list(&undo_list);
2034 if (error)
2035 return error;
2036 atomic_inc(&undo_list->refcnt);
2037 tsk->sysvsem.undo_list = undo_list;
2038 } else
2039 tsk->sysvsem.undo_list = NULL;
2040
2041 return 0;
2042 }
2043
2044 /*
2045 * add semadj values to semaphores, free undo structures.
2046 * undo structures are not freed when semaphore arrays are destroyed
2047 * so some of them may be out of date.
2048 * IMPLEMENTATION NOTE: There is some confusion over whether the
2049 * set of adjustments that needs to be done should be done in an atomic
2050 * manner or not. That is, if we are attempting to decrement the semval
2051 * should we queue up and wait until we can do so legally?
2052 * The original implementation attempted to do this (queue and wait).
2053 * The current implementation does not do so. The POSIX standard
2054 * and SVID should be consulted to determine what behavior is mandated.
2055 */
2056 void exit_sem(struct task_struct *tsk)
2057 {
2058 struct sem_undo_list *ulp;
2059
2060 ulp = tsk->sysvsem.undo_list;
2061 if (!ulp)
2062 return;
2063 tsk->sysvsem.undo_list = NULL;
2064
2065 if (!atomic_dec_and_test(&ulp->refcnt))
2066 return;
2067
2068 for (;;) {
2069 struct sem_array *sma;
2070 struct sem_undo *un;
2071 struct list_head tasks;
2072 int semid, i;
2073
2074 rcu_read_lock();
2075 un = list_entry_rcu(ulp->list_proc.next,
2076 struct sem_undo, list_proc);
2077 if (&un->list_proc == &ulp->list_proc)
2078 semid = -1;
2079 else
2080 semid = un->semid;
2081
2082 if (semid == -1) {
2083 rcu_read_unlock();
2084 break;
2085 }
2086
2087 sma = sem_obtain_object_check(tsk->nsproxy->ipc_ns, un->semid);
2088 /* exit_sem raced with IPC_RMID, nothing to do */
2089 if (IS_ERR(sma)) {
2090 rcu_read_unlock();
2091 continue;
2092 }
2093
2094 sem_lock(sma, NULL, -1);
2095 /* exit_sem raced with IPC_RMID, nothing to do */
2096 if (!ipc_valid_object(&sma->sem_perm)) {
2097 sem_unlock(sma, -1);
2098 rcu_read_unlock();
2099 continue;
2100 }
2101 un = __lookup_undo(ulp, semid);
2102 if (un == NULL) {
2103 /* exit_sem raced with IPC_RMID+semget() that created
2104 * exactly the same semid. Nothing to do.
2105 */
2106 sem_unlock(sma, -1);
2107 rcu_read_unlock();
2108 continue;
2109 }
2110
2111 /* remove un from the linked lists */
2112 ipc_assert_locked_object(&sma->sem_perm);
2113 list_del(&un->list_id);
2114
2115 spin_lock(&ulp->lock);
2116 list_del_rcu(&un->list_proc);
2117 spin_unlock(&ulp->lock);
2118
2119 /* perform adjustments registered in un */
2120 for (i = 0; i < sma->sem_nsems; i++) {
2121 struct sem *semaphore = &sma->sem_base[i];
2122 if (un->semadj[i]) {
2123 semaphore->semval += un->semadj[i];
2124 /*
2125 * Range checks of the new semaphore value,
2126 * not defined by sus:
2127 * - Some unices ignore the undo entirely
2128 * (e.g. HP UX 11i 11.22, Tru64 V5.1)
2129 * - some cap the value (e.g. FreeBSD caps
2130 * at 0, but doesn't enforce SEMVMX)
2131 *
2132 * Linux caps the semaphore value, both at 0
2133 * and at SEMVMX.
2134 *
2135 * Manfred <manfred@colorfullife.com>
2136 */
2137 if (semaphore->semval < 0)
2138 semaphore->semval = 0;
2139 if (semaphore->semval > SEMVMX)
2140 semaphore->semval = SEMVMX;
2141 semaphore->sempid = task_tgid_vnr(current);
2142 }
2143 }
2144 /* maybe some queued-up processes were waiting for this */
2145 INIT_LIST_HEAD(&tasks);
2146 do_smart_update(sma, NULL, 0, 1, &tasks);
2147 sem_unlock(sma, -1);
2148 rcu_read_unlock();
2149 wake_up_sem_queue_do(&tasks);
2150
2151 kfree_rcu(un, rcu);
2152 }
2153 kfree(ulp);
2154 }
2155
2156 #ifdef CONFIG_PROC_FS
2157 static int sysvipc_sem_proc_show(struct seq_file *s, void *it)
2158 {
2159 struct user_namespace *user_ns = seq_user_ns(s);
2160 struct sem_array *sma = it;
2161 time_t sem_otime;
2162
2163 /*
2164 * The proc interface isn't aware of sem_lock(), it calls
2165 * ipc_lock_object() directly (in sysvipc_find_ipc).
2166 * In order to stay compatible with sem_lock(), we must wait until
2167 * all simple semop() calls have left their critical regions.
2168 */
2169 sem_wait_array(sma);
2170
2171 sem_otime = get_semotime(sma);
2172
2173 return seq_printf(s,
2174 "%10d %10d %4o %10u %5u %5u %5u %5u %10lu %10lu\n",
2175 sma->sem_perm.key,
2176 sma->sem_perm.id,
2177 sma->sem_perm.mode,
2178 sma->sem_nsems,
2179 from_kuid_munged(user_ns, sma->sem_perm.uid),
2180 from_kgid_munged(user_ns, sma->sem_perm.gid),
2181 from_kuid_munged(user_ns, sma->sem_perm.cuid),
2182 from_kgid_munged(user_ns, sma->sem_perm.cgid),
2183 sem_otime,
2184 sma->sem_ctime);
2185 }
2186 #endif