]> git.proxmox.com Git - mirror_ubuntu-artful-kernel.git/blob - kernel/power/hibernate.c
Merge tag 'trace-v4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt...
[mirror_ubuntu-artful-kernel.git] / kernel / power / hibernate.c
1 /*
2 * kernel/power/hibernate.c - Hibernation (a.k.a suspend-to-disk) support.
3 *
4 * Copyright (c) 2003 Patrick Mochel
5 * Copyright (c) 2003 Open Source Development Lab
6 * Copyright (c) 2004 Pavel Machek <pavel@ucw.cz>
7 * Copyright (c) 2009 Rafael J. Wysocki, Novell Inc.
8 * Copyright (C) 2012 Bojan Smojver <bojan@rexursive.com>
9 *
10 * This file is released under the GPLv2.
11 */
12
13 #define pr_fmt(fmt) "PM: " fmt
14
15 #include <linux/export.h>
16 #include <linux/suspend.h>
17 #include <linux/syscalls.h>
18 #include <linux/reboot.h>
19 #include <linux/string.h>
20 #include <linux/device.h>
21 #include <linux/async.h>
22 #include <linux/delay.h>
23 #include <linux/fs.h>
24 #include <linux/mount.h>
25 #include <linux/pm.h>
26 #include <linux/nmi.h>
27 #include <linux/console.h>
28 #include <linux/cpu.h>
29 #include <linux/freezer.h>
30 #include <linux/gfp.h>
31 #include <linux/syscore_ops.h>
32 #include <linux/ctype.h>
33 #include <linux/genhd.h>
34 #include <linux/ktime.h>
35 #include <trace/events/power.h>
36
37 #include "power.h"
38
39
40 static int nocompress;
41 static int noresume;
42 static int nohibernate;
43 static int resume_wait;
44 static unsigned int resume_delay;
45 static char resume_file[256] = CONFIG_PM_STD_PARTITION;
46 dev_t swsusp_resume_device;
47 sector_t swsusp_resume_block;
48 __visible int in_suspend __nosavedata;
49
50 enum {
51 HIBERNATION_INVALID,
52 HIBERNATION_PLATFORM,
53 HIBERNATION_SHUTDOWN,
54 HIBERNATION_REBOOT,
55 #ifdef CONFIG_SUSPEND
56 HIBERNATION_SUSPEND,
57 #endif
58 HIBERNATION_TEST_RESUME,
59 /* keep last */
60 __HIBERNATION_AFTER_LAST
61 };
62 #define HIBERNATION_MAX (__HIBERNATION_AFTER_LAST-1)
63 #define HIBERNATION_FIRST (HIBERNATION_INVALID + 1)
64
65 static int hibernation_mode = HIBERNATION_SHUTDOWN;
66
67 bool freezer_test_done;
68
69 static const struct platform_hibernation_ops *hibernation_ops;
70
71 bool hibernation_available(void)
72 {
73 return (nohibernate == 0);
74 }
75
76 /**
77 * hibernation_set_ops - Set the global hibernate operations.
78 * @ops: Hibernation operations to use in subsequent hibernation transitions.
79 */
80 void hibernation_set_ops(const struct platform_hibernation_ops *ops)
81 {
82 if (ops && !(ops->begin && ops->end && ops->pre_snapshot
83 && ops->prepare && ops->finish && ops->enter && ops->pre_restore
84 && ops->restore_cleanup && ops->leave)) {
85 WARN_ON(1);
86 return;
87 }
88 lock_system_sleep();
89 hibernation_ops = ops;
90 if (ops)
91 hibernation_mode = HIBERNATION_PLATFORM;
92 else if (hibernation_mode == HIBERNATION_PLATFORM)
93 hibernation_mode = HIBERNATION_SHUTDOWN;
94
95 unlock_system_sleep();
96 }
97 EXPORT_SYMBOL_GPL(hibernation_set_ops);
98
99 static bool entering_platform_hibernation;
100
101 bool system_entering_hibernation(void)
102 {
103 return entering_platform_hibernation;
104 }
105 EXPORT_SYMBOL(system_entering_hibernation);
106
107 #ifdef CONFIG_PM_DEBUG
108 static void hibernation_debug_sleep(void)
109 {
110 pr_info("hibernation debug: Waiting for 5 seconds.\n");
111 mdelay(5000);
112 }
113
114 static int hibernation_test(int level)
115 {
116 if (pm_test_level == level) {
117 hibernation_debug_sleep();
118 return 1;
119 }
120 return 0;
121 }
122 #else /* !CONFIG_PM_DEBUG */
123 static int hibernation_test(int level) { return 0; }
124 #endif /* !CONFIG_PM_DEBUG */
125
126 /**
127 * platform_begin - Call platform to start hibernation.
128 * @platform_mode: Whether or not to use the platform driver.
129 */
130 static int platform_begin(int platform_mode)
131 {
132 return (platform_mode && hibernation_ops) ?
133 hibernation_ops->begin() : 0;
134 }
135
136 /**
137 * platform_end - Call platform to finish transition to the working state.
138 * @platform_mode: Whether or not to use the platform driver.
139 */
140 static void platform_end(int platform_mode)
141 {
142 if (platform_mode && hibernation_ops)
143 hibernation_ops->end();
144 }
145
146 /**
147 * platform_pre_snapshot - Call platform to prepare the machine for hibernation.
148 * @platform_mode: Whether or not to use the platform driver.
149 *
150 * Use the platform driver to prepare the system for creating a hibernate image,
151 * if so configured, and return an error code if that fails.
152 */
153
154 static int platform_pre_snapshot(int platform_mode)
155 {
156 return (platform_mode && hibernation_ops) ?
157 hibernation_ops->pre_snapshot() : 0;
158 }
159
160 /**
161 * platform_leave - Call platform to prepare a transition to the working state.
162 * @platform_mode: Whether or not to use the platform driver.
163 *
164 * Use the platform driver prepare to prepare the machine for switching to the
165 * normal mode of operation.
166 *
167 * This routine is called on one CPU with interrupts disabled.
168 */
169 static void platform_leave(int platform_mode)
170 {
171 if (platform_mode && hibernation_ops)
172 hibernation_ops->leave();
173 }
174
175 /**
176 * platform_finish - Call platform to switch the system to the working state.
177 * @platform_mode: Whether or not to use the platform driver.
178 *
179 * Use the platform driver to switch the machine to the normal mode of
180 * operation.
181 *
182 * This routine must be called after platform_prepare().
183 */
184 static void platform_finish(int platform_mode)
185 {
186 if (platform_mode && hibernation_ops)
187 hibernation_ops->finish();
188 }
189
190 /**
191 * platform_pre_restore - Prepare for hibernate image restoration.
192 * @platform_mode: Whether or not to use the platform driver.
193 *
194 * Use the platform driver to prepare the system for resume from a hibernation
195 * image.
196 *
197 * If the restore fails after this function has been called,
198 * platform_restore_cleanup() must be called.
199 */
200 static int platform_pre_restore(int platform_mode)
201 {
202 return (platform_mode && hibernation_ops) ?
203 hibernation_ops->pre_restore() : 0;
204 }
205
206 /**
207 * platform_restore_cleanup - Switch to the working state after failing restore.
208 * @platform_mode: Whether or not to use the platform driver.
209 *
210 * Use the platform driver to switch the system to the normal mode of operation
211 * after a failing restore.
212 *
213 * If platform_pre_restore() has been called before the failing restore, this
214 * function must be called too, regardless of the result of
215 * platform_pre_restore().
216 */
217 static void platform_restore_cleanup(int platform_mode)
218 {
219 if (platform_mode && hibernation_ops)
220 hibernation_ops->restore_cleanup();
221 }
222
223 /**
224 * platform_recover - Recover from a failure to suspend devices.
225 * @platform_mode: Whether or not to use the platform driver.
226 */
227 static void platform_recover(int platform_mode)
228 {
229 if (platform_mode && hibernation_ops && hibernation_ops->recover)
230 hibernation_ops->recover();
231 }
232
233 /**
234 * swsusp_show_speed - Print time elapsed between two events during hibernation.
235 * @start: Starting event.
236 * @stop: Final event.
237 * @nr_pages: Number of memory pages processed between @start and @stop.
238 * @msg: Additional diagnostic message to print.
239 */
240 void swsusp_show_speed(ktime_t start, ktime_t stop,
241 unsigned nr_pages, char *msg)
242 {
243 ktime_t diff;
244 u64 elapsed_centisecs64;
245 unsigned int centisecs;
246 unsigned int k;
247 unsigned int kps;
248
249 diff = ktime_sub(stop, start);
250 elapsed_centisecs64 = ktime_divns(diff, 10*NSEC_PER_MSEC);
251 centisecs = elapsed_centisecs64;
252 if (centisecs == 0)
253 centisecs = 1; /* avoid div-by-zero */
254 k = nr_pages * (PAGE_SIZE / 1024);
255 kps = (k * 100) / centisecs;
256 pr_info("%s %u kbytes in %u.%02u seconds (%u.%02u MB/s)\n",
257 msg, k, centisecs / 100, centisecs % 100, kps / 1000,
258 (kps % 1000) / 10);
259 }
260
261 /**
262 * create_image - Create a hibernation image.
263 * @platform_mode: Whether or not to use the platform driver.
264 *
265 * Execute device drivers' "late" and "noirq" freeze callbacks, create a
266 * hibernation image and run the drivers' "noirq" and "early" thaw callbacks.
267 *
268 * Control reappears in this routine after the subsequent restore.
269 */
270 static int create_image(int platform_mode)
271 {
272 int error;
273
274 error = dpm_suspend_end(PMSG_FREEZE);
275 if (error) {
276 pr_err("Some devices failed to power down, aborting hibernation\n");
277 return error;
278 }
279
280 error = platform_pre_snapshot(platform_mode);
281 if (error || hibernation_test(TEST_PLATFORM))
282 goto Platform_finish;
283
284 error = disable_nonboot_cpus();
285 if (error || hibernation_test(TEST_CPUS))
286 goto Enable_cpus;
287
288 local_irq_disable();
289
290 error = syscore_suspend();
291 if (error) {
292 pr_err("Some system devices failed to power down, aborting hibernation\n");
293 goto Enable_irqs;
294 }
295
296 if (hibernation_test(TEST_CORE) || pm_wakeup_pending())
297 goto Power_up;
298
299 in_suspend = 1;
300 save_processor_state();
301 trace_suspend_resume(TPS("machine_suspend"), PM_EVENT_HIBERNATE, true);
302 error = swsusp_arch_suspend();
303 /* Restore control flow magically appears here */
304 restore_processor_state();
305 trace_suspend_resume(TPS("machine_suspend"), PM_EVENT_HIBERNATE, false);
306 if (error)
307 pr_err("Error %d creating hibernation image\n", error);
308
309 if (!in_suspend) {
310 events_check_enabled = false;
311 clear_free_pages();
312 }
313
314 platform_leave(platform_mode);
315
316 Power_up:
317 syscore_resume();
318
319 Enable_irqs:
320 local_irq_enable();
321
322 Enable_cpus:
323 enable_nonboot_cpus();
324
325 Platform_finish:
326 platform_finish(platform_mode);
327
328 dpm_resume_start(in_suspend ?
329 (error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE);
330
331 return error;
332 }
333
334 /**
335 * hibernation_snapshot - Quiesce devices and create a hibernation image.
336 * @platform_mode: If set, use platform driver to prepare for the transition.
337 *
338 * This routine must be called with pm_mutex held.
339 */
340 int hibernation_snapshot(int platform_mode)
341 {
342 pm_message_t msg;
343 int error;
344
345 pm_suspend_clear_flags();
346 error = platform_begin(platform_mode);
347 if (error)
348 goto Close;
349
350 /* Preallocate image memory before shutting down devices. */
351 error = hibernate_preallocate_memory();
352 if (error)
353 goto Close;
354
355 error = freeze_kernel_threads();
356 if (error)
357 goto Cleanup;
358
359 if (hibernation_test(TEST_FREEZER)) {
360
361 /*
362 * Indicate to the caller that we are returning due to a
363 * successful freezer test.
364 */
365 freezer_test_done = true;
366 goto Thaw;
367 }
368
369 error = dpm_prepare(PMSG_FREEZE);
370 if (error) {
371 dpm_complete(PMSG_RECOVER);
372 goto Thaw;
373 }
374
375 suspend_console();
376 pm_restrict_gfp_mask();
377
378 error = dpm_suspend(PMSG_FREEZE);
379
380 if (error || hibernation_test(TEST_DEVICES))
381 platform_recover(platform_mode);
382 else
383 error = create_image(platform_mode);
384
385 /*
386 * In the case that we call create_image() above, the control
387 * returns here (1) after the image has been created or the
388 * image creation has failed and (2) after a successful restore.
389 */
390
391 /* We may need to release the preallocated image pages here. */
392 if (error || !in_suspend)
393 swsusp_free();
394
395 msg = in_suspend ? (error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE;
396 dpm_resume(msg);
397
398 if (error || !in_suspend)
399 pm_restore_gfp_mask();
400
401 resume_console();
402 dpm_complete(msg);
403
404 Close:
405 platform_end(platform_mode);
406 return error;
407
408 Thaw:
409 thaw_kernel_threads();
410 Cleanup:
411 swsusp_free();
412 goto Close;
413 }
414
415 int __weak hibernate_resume_nonboot_cpu_disable(void)
416 {
417 return disable_nonboot_cpus();
418 }
419
420 /**
421 * resume_target_kernel - Restore system state from a hibernation image.
422 * @platform_mode: Whether or not to use the platform driver.
423 *
424 * Execute device drivers' "noirq" and "late" freeze callbacks, restore the
425 * contents of highmem that have not been restored yet from the image and run
426 * the low-level code that will restore the remaining contents of memory and
427 * switch to the just restored target kernel.
428 */
429 static int resume_target_kernel(bool platform_mode)
430 {
431 int error;
432
433 error = dpm_suspend_end(PMSG_QUIESCE);
434 if (error) {
435 pr_err("Some devices failed to power down, aborting resume\n");
436 return error;
437 }
438
439 error = platform_pre_restore(platform_mode);
440 if (error)
441 goto Cleanup;
442
443 error = hibernate_resume_nonboot_cpu_disable();
444 if (error)
445 goto Enable_cpus;
446
447 local_irq_disable();
448
449 error = syscore_suspend();
450 if (error)
451 goto Enable_irqs;
452
453 save_processor_state();
454 error = restore_highmem();
455 if (!error) {
456 error = swsusp_arch_resume();
457 /*
458 * The code below is only ever reached in case of a failure.
459 * Otherwise, execution continues at the place where
460 * swsusp_arch_suspend() was called.
461 */
462 BUG_ON(!error);
463 /*
464 * This call to restore_highmem() reverts the changes made by
465 * the previous one.
466 */
467 restore_highmem();
468 }
469 /*
470 * The only reason why swsusp_arch_resume() can fail is memory being
471 * very tight, so we have to free it as soon as we can to avoid
472 * subsequent failures.
473 */
474 swsusp_free();
475 restore_processor_state();
476 touch_softlockup_watchdog();
477
478 syscore_resume();
479
480 Enable_irqs:
481 local_irq_enable();
482
483 Enable_cpus:
484 enable_nonboot_cpus();
485
486 Cleanup:
487 platform_restore_cleanup(platform_mode);
488
489 dpm_resume_start(PMSG_RECOVER);
490
491 return error;
492 }
493
494 /**
495 * hibernation_restore - Quiesce devices and restore from a hibernation image.
496 * @platform_mode: If set, use platform driver to prepare for the transition.
497 *
498 * This routine must be called with pm_mutex held. If it is successful, control
499 * reappears in the restored target kernel in hibernation_snapshot().
500 */
501 int hibernation_restore(int platform_mode)
502 {
503 int error;
504
505 pm_prepare_console();
506 suspend_console();
507 pm_restrict_gfp_mask();
508 error = dpm_suspend_start(PMSG_QUIESCE);
509 if (!error) {
510 error = resume_target_kernel(platform_mode);
511 /*
512 * The above should either succeed and jump to the new kernel,
513 * or return with an error. Otherwise things are just
514 * undefined, so let's be paranoid.
515 */
516 BUG_ON(!error);
517 }
518 dpm_resume_end(PMSG_RECOVER);
519 pm_restore_gfp_mask();
520 resume_console();
521 pm_restore_console();
522 return error;
523 }
524
525 /**
526 * hibernation_platform_enter - Power off the system using the platform driver.
527 */
528 int hibernation_platform_enter(void)
529 {
530 int error;
531
532 if (!hibernation_ops)
533 return -ENOSYS;
534
535 /*
536 * We have cancelled the power transition by running
537 * hibernation_ops->finish() before saving the image, so we should let
538 * the firmware know that we're going to enter the sleep state after all
539 */
540 error = hibernation_ops->begin();
541 if (error)
542 goto Close;
543
544 entering_platform_hibernation = true;
545 suspend_console();
546 error = dpm_suspend_start(PMSG_HIBERNATE);
547 if (error) {
548 if (hibernation_ops->recover)
549 hibernation_ops->recover();
550 goto Resume_devices;
551 }
552
553 error = dpm_suspend_end(PMSG_HIBERNATE);
554 if (error)
555 goto Resume_devices;
556
557 error = hibernation_ops->prepare();
558 if (error)
559 goto Platform_finish;
560
561 error = disable_nonboot_cpus();
562 if (error)
563 goto Enable_cpus;
564
565 local_irq_disable();
566 syscore_suspend();
567 if (pm_wakeup_pending()) {
568 error = -EAGAIN;
569 goto Power_up;
570 }
571
572 hibernation_ops->enter();
573 /* We should never get here */
574 while (1);
575
576 Power_up:
577 syscore_resume();
578 local_irq_enable();
579
580 Enable_cpus:
581 enable_nonboot_cpus();
582
583 Platform_finish:
584 hibernation_ops->finish();
585
586 dpm_resume_start(PMSG_RESTORE);
587
588 Resume_devices:
589 entering_platform_hibernation = false;
590 dpm_resume_end(PMSG_RESTORE);
591 resume_console();
592
593 Close:
594 hibernation_ops->end();
595
596 return error;
597 }
598
599 /**
600 * power_down - Shut the machine down for hibernation.
601 *
602 * Use the platform driver, if configured, to put the system into the sleep
603 * state corresponding to hibernation, or try to power it off or reboot,
604 * depending on the value of hibernation_mode.
605 */
606 static void power_down(void)
607 {
608 #ifdef CONFIG_SUSPEND
609 int error;
610
611 if (hibernation_mode == HIBERNATION_SUSPEND) {
612 error = suspend_devices_and_enter(PM_SUSPEND_MEM);
613 if (error) {
614 hibernation_mode = hibernation_ops ?
615 HIBERNATION_PLATFORM :
616 HIBERNATION_SHUTDOWN;
617 } else {
618 /* Restore swap signature. */
619 error = swsusp_unmark();
620 if (error)
621 pr_err("Swap will be unusable! Try swapon -a.\n");
622
623 return;
624 }
625 }
626 #endif
627
628 switch (hibernation_mode) {
629 case HIBERNATION_REBOOT:
630 kernel_restart(NULL);
631 break;
632 case HIBERNATION_PLATFORM:
633 hibernation_platform_enter();
634 case HIBERNATION_SHUTDOWN:
635 if (pm_power_off)
636 kernel_power_off();
637 break;
638 }
639 kernel_halt();
640 /*
641 * Valid image is on the disk, if we continue we risk serious data
642 * corruption after resume.
643 */
644 pr_crit("Power down manually\n");
645 while (1)
646 cpu_relax();
647 }
648
649 static int load_image_and_restore(void)
650 {
651 int error;
652 unsigned int flags;
653
654 pr_debug("Loading hibernation image.\n");
655
656 lock_device_hotplug();
657 error = create_basic_memory_bitmaps();
658 if (error)
659 goto Unlock;
660
661 error = swsusp_read(&flags);
662 swsusp_close(FMODE_READ);
663 if (!error)
664 hibernation_restore(flags & SF_PLATFORM_MODE);
665
666 pr_err("Failed to load hibernation image, recovering.\n");
667 swsusp_free();
668 free_basic_memory_bitmaps();
669 Unlock:
670 unlock_device_hotplug();
671
672 return error;
673 }
674
675 /**
676 * hibernate - Carry out system hibernation, including saving the image.
677 */
678 int hibernate(void)
679 {
680 int error, nr_calls = 0;
681 bool snapshot_test = false;
682
683 if (!hibernation_available()) {
684 pr_debug("Hibernation not available.\n");
685 return -EPERM;
686 }
687
688 lock_system_sleep();
689 /* The snapshot device should not be opened while we're running */
690 if (!atomic_add_unless(&snapshot_device_available, -1, 0)) {
691 error = -EBUSY;
692 goto Unlock;
693 }
694
695 pm_prepare_console();
696 error = __pm_notifier_call_chain(PM_HIBERNATION_PREPARE, -1, &nr_calls);
697 if (error) {
698 nr_calls--;
699 goto Exit;
700 }
701
702 pr_info("Syncing filesystems ... \n");
703 sys_sync();
704 pr_info("done.\n");
705
706 error = freeze_processes();
707 if (error)
708 goto Exit;
709
710 lock_device_hotplug();
711 /* Allocate memory management structures */
712 error = create_basic_memory_bitmaps();
713 if (error)
714 goto Thaw;
715
716 error = hibernation_snapshot(hibernation_mode == HIBERNATION_PLATFORM);
717 if (error || freezer_test_done)
718 goto Free_bitmaps;
719
720 if (in_suspend) {
721 unsigned int flags = 0;
722
723 if (hibernation_mode == HIBERNATION_PLATFORM)
724 flags |= SF_PLATFORM_MODE;
725 if (nocompress)
726 flags |= SF_NOCOMPRESS_MODE;
727 else
728 flags |= SF_CRC32_MODE;
729
730 pr_debug("Writing image.\n");
731 error = swsusp_write(flags);
732 swsusp_free();
733 if (!error) {
734 if (hibernation_mode == HIBERNATION_TEST_RESUME)
735 snapshot_test = true;
736 else
737 power_down();
738 }
739 in_suspend = 0;
740 pm_restore_gfp_mask();
741 } else {
742 pr_debug("Image restored successfully.\n");
743 }
744
745 Free_bitmaps:
746 free_basic_memory_bitmaps();
747 Thaw:
748 unlock_device_hotplug();
749 if (snapshot_test) {
750 pr_debug("Checking hibernation image\n");
751 error = swsusp_check();
752 if (!error)
753 error = load_image_and_restore();
754 }
755 thaw_processes();
756
757 /* Don't bother checking whether freezer_test_done is true */
758 freezer_test_done = false;
759 Exit:
760 __pm_notifier_call_chain(PM_POST_HIBERNATION, nr_calls, NULL);
761 pm_restore_console();
762 atomic_inc(&snapshot_device_available);
763 Unlock:
764 unlock_system_sleep();
765 return error;
766 }
767
768
769 /**
770 * software_resume - Resume from a saved hibernation image.
771 *
772 * This routine is called as a late initcall, when all devices have been
773 * discovered and initialized already.
774 *
775 * The image reading code is called to see if there is a hibernation image
776 * available for reading. If that is the case, devices are quiesced and the
777 * contents of memory is restored from the saved image.
778 *
779 * If this is successful, control reappears in the restored target kernel in
780 * hibernation_snapshot() which returns to hibernate(). Otherwise, the routine
781 * attempts to recover gracefully and make the kernel return to the normal mode
782 * of operation.
783 */
784 static int software_resume(void)
785 {
786 int error, nr_calls = 0;
787
788 /*
789 * If the user said "noresume".. bail out early.
790 */
791 if (noresume || !hibernation_available())
792 return 0;
793
794 /*
795 * name_to_dev_t() below takes a sysfs buffer mutex when sysfs
796 * is configured into the kernel. Since the regular hibernate
797 * trigger path is via sysfs which takes a buffer mutex before
798 * calling hibernate functions (which take pm_mutex) this can
799 * cause lockdep to complain about a possible ABBA deadlock
800 * which cannot happen since we're in the boot code here and
801 * sysfs can't be invoked yet. Therefore, we use a subclass
802 * here to avoid lockdep complaining.
803 */
804 mutex_lock_nested(&pm_mutex, SINGLE_DEPTH_NESTING);
805
806 if (swsusp_resume_device)
807 goto Check_image;
808
809 if (!strlen(resume_file)) {
810 error = -ENOENT;
811 goto Unlock;
812 }
813
814 pr_debug("Checking hibernation image partition %s\n", resume_file);
815
816 if (resume_delay) {
817 pr_info("Waiting %dsec before reading resume device ...\n",
818 resume_delay);
819 ssleep(resume_delay);
820 }
821
822 /* Check if the device is there */
823 swsusp_resume_device = name_to_dev_t(resume_file);
824
825 /*
826 * name_to_dev_t is ineffective to verify parition if resume_file is in
827 * integer format. (e.g. major:minor)
828 */
829 if (isdigit(resume_file[0]) && resume_wait) {
830 int partno;
831 while (!get_gendisk(swsusp_resume_device, &partno))
832 msleep(10);
833 }
834
835 if (!swsusp_resume_device) {
836 /*
837 * Some device discovery might still be in progress; we need
838 * to wait for this to finish.
839 */
840 wait_for_device_probe();
841
842 if (resume_wait) {
843 while ((swsusp_resume_device = name_to_dev_t(resume_file)) == 0)
844 msleep(10);
845 async_synchronize_full();
846 }
847
848 swsusp_resume_device = name_to_dev_t(resume_file);
849 if (!swsusp_resume_device) {
850 error = -ENODEV;
851 goto Unlock;
852 }
853 }
854
855 Check_image:
856 pr_debug("Hibernation image partition %d:%d present\n",
857 MAJOR(swsusp_resume_device), MINOR(swsusp_resume_device));
858
859 pr_debug("Looking for hibernation image.\n");
860 error = swsusp_check();
861 if (error)
862 goto Unlock;
863
864 /* The snapshot device should not be opened while we're running */
865 if (!atomic_add_unless(&snapshot_device_available, -1, 0)) {
866 error = -EBUSY;
867 swsusp_close(FMODE_READ);
868 goto Unlock;
869 }
870
871 pm_prepare_console();
872 error = __pm_notifier_call_chain(PM_RESTORE_PREPARE, -1, &nr_calls);
873 if (error) {
874 nr_calls--;
875 goto Close_Finish;
876 }
877
878 pr_debug("Preparing processes for restore.\n");
879 error = freeze_processes();
880 if (error)
881 goto Close_Finish;
882 error = load_image_and_restore();
883 thaw_processes();
884 Finish:
885 __pm_notifier_call_chain(PM_POST_RESTORE, nr_calls, NULL);
886 pm_restore_console();
887 atomic_inc(&snapshot_device_available);
888 /* For success case, the suspend path will release the lock */
889 Unlock:
890 mutex_unlock(&pm_mutex);
891 pr_debug("Hibernation image not present or could not be loaded.\n");
892 return error;
893 Close_Finish:
894 swsusp_close(FMODE_READ);
895 goto Finish;
896 }
897
898 late_initcall_sync(software_resume);
899
900
901 static const char * const hibernation_modes[] = {
902 [HIBERNATION_PLATFORM] = "platform",
903 [HIBERNATION_SHUTDOWN] = "shutdown",
904 [HIBERNATION_REBOOT] = "reboot",
905 #ifdef CONFIG_SUSPEND
906 [HIBERNATION_SUSPEND] = "suspend",
907 #endif
908 [HIBERNATION_TEST_RESUME] = "test_resume",
909 };
910
911 /*
912 * /sys/power/disk - Control hibernation mode.
913 *
914 * Hibernation can be handled in several ways. There are a few different ways
915 * to put the system into the sleep state: using the platform driver (e.g. ACPI
916 * or other hibernation_ops), powering it off or rebooting it (for testing
917 * mostly).
918 *
919 * The sysfs file /sys/power/disk provides an interface for selecting the
920 * hibernation mode to use. Reading from this file causes the available modes
921 * to be printed. There are 3 modes that can be supported:
922 *
923 * 'platform'
924 * 'shutdown'
925 * 'reboot'
926 *
927 * If a platform hibernation driver is in use, 'platform' will be supported
928 * and will be used by default. Otherwise, 'shutdown' will be used by default.
929 * The selected option (i.e. the one corresponding to the current value of
930 * hibernation_mode) is enclosed by a square bracket.
931 *
932 * To select a given hibernation mode it is necessary to write the mode's
933 * string representation (as returned by reading from /sys/power/disk) back
934 * into /sys/power/disk.
935 */
936
937 static ssize_t disk_show(struct kobject *kobj, struct kobj_attribute *attr,
938 char *buf)
939 {
940 int i;
941 char *start = buf;
942
943 if (!hibernation_available())
944 return sprintf(buf, "[disabled]\n");
945
946 for (i = HIBERNATION_FIRST; i <= HIBERNATION_MAX; i++) {
947 if (!hibernation_modes[i])
948 continue;
949 switch (i) {
950 case HIBERNATION_SHUTDOWN:
951 case HIBERNATION_REBOOT:
952 #ifdef CONFIG_SUSPEND
953 case HIBERNATION_SUSPEND:
954 #endif
955 case HIBERNATION_TEST_RESUME:
956 break;
957 case HIBERNATION_PLATFORM:
958 if (hibernation_ops)
959 break;
960 /* not a valid mode, continue with loop */
961 continue;
962 }
963 if (i == hibernation_mode)
964 buf += sprintf(buf, "[%s] ", hibernation_modes[i]);
965 else
966 buf += sprintf(buf, "%s ", hibernation_modes[i]);
967 }
968 buf += sprintf(buf, "\n");
969 return buf-start;
970 }
971
972 static ssize_t disk_store(struct kobject *kobj, struct kobj_attribute *attr,
973 const char *buf, size_t n)
974 {
975 int error = 0;
976 int i;
977 int len;
978 char *p;
979 int mode = HIBERNATION_INVALID;
980
981 if (!hibernation_available())
982 return -EPERM;
983
984 p = memchr(buf, '\n', n);
985 len = p ? p - buf : n;
986
987 lock_system_sleep();
988 for (i = HIBERNATION_FIRST; i <= HIBERNATION_MAX; i++) {
989 if (len == strlen(hibernation_modes[i])
990 && !strncmp(buf, hibernation_modes[i], len)) {
991 mode = i;
992 break;
993 }
994 }
995 if (mode != HIBERNATION_INVALID) {
996 switch (mode) {
997 case HIBERNATION_SHUTDOWN:
998 case HIBERNATION_REBOOT:
999 #ifdef CONFIG_SUSPEND
1000 case HIBERNATION_SUSPEND:
1001 #endif
1002 case HIBERNATION_TEST_RESUME:
1003 hibernation_mode = mode;
1004 break;
1005 case HIBERNATION_PLATFORM:
1006 if (hibernation_ops)
1007 hibernation_mode = mode;
1008 else
1009 error = -EINVAL;
1010 }
1011 } else
1012 error = -EINVAL;
1013
1014 if (!error)
1015 pr_debug("Hibernation mode set to '%s'\n",
1016 hibernation_modes[mode]);
1017 unlock_system_sleep();
1018 return error ? error : n;
1019 }
1020
1021 power_attr(disk);
1022
1023 static ssize_t resume_show(struct kobject *kobj, struct kobj_attribute *attr,
1024 char *buf)
1025 {
1026 return sprintf(buf,"%d:%d\n", MAJOR(swsusp_resume_device),
1027 MINOR(swsusp_resume_device));
1028 }
1029
1030 static ssize_t resume_store(struct kobject *kobj, struct kobj_attribute *attr,
1031 const char *buf, size_t n)
1032 {
1033 dev_t res;
1034 int len = n;
1035 char *name;
1036
1037 if (len && buf[len-1] == '\n')
1038 len--;
1039 name = kstrndup(buf, len, GFP_KERNEL);
1040 if (!name)
1041 return -ENOMEM;
1042
1043 res = name_to_dev_t(name);
1044 kfree(name);
1045 if (!res)
1046 return -EINVAL;
1047
1048 lock_system_sleep();
1049 swsusp_resume_device = res;
1050 unlock_system_sleep();
1051 pr_info("Starting manual resume from disk\n");
1052 noresume = 0;
1053 software_resume();
1054 return n;
1055 }
1056
1057 power_attr(resume);
1058
1059 static ssize_t image_size_show(struct kobject *kobj, struct kobj_attribute *attr,
1060 char *buf)
1061 {
1062 return sprintf(buf, "%lu\n", image_size);
1063 }
1064
1065 static ssize_t image_size_store(struct kobject *kobj, struct kobj_attribute *attr,
1066 const char *buf, size_t n)
1067 {
1068 unsigned long size;
1069
1070 if (sscanf(buf, "%lu", &size) == 1) {
1071 image_size = size;
1072 return n;
1073 }
1074
1075 return -EINVAL;
1076 }
1077
1078 power_attr(image_size);
1079
1080 static ssize_t reserved_size_show(struct kobject *kobj,
1081 struct kobj_attribute *attr, char *buf)
1082 {
1083 return sprintf(buf, "%lu\n", reserved_size);
1084 }
1085
1086 static ssize_t reserved_size_store(struct kobject *kobj,
1087 struct kobj_attribute *attr,
1088 const char *buf, size_t n)
1089 {
1090 unsigned long size;
1091
1092 if (sscanf(buf, "%lu", &size) == 1) {
1093 reserved_size = size;
1094 return n;
1095 }
1096
1097 return -EINVAL;
1098 }
1099
1100 power_attr(reserved_size);
1101
1102 static struct attribute * g[] = {
1103 &disk_attr.attr,
1104 &resume_attr.attr,
1105 &image_size_attr.attr,
1106 &reserved_size_attr.attr,
1107 NULL,
1108 };
1109
1110
1111 static struct attribute_group attr_group = {
1112 .attrs = g,
1113 };
1114
1115
1116 static int __init pm_disk_init(void)
1117 {
1118 return sysfs_create_group(power_kobj, &attr_group);
1119 }
1120
1121 core_initcall(pm_disk_init);
1122
1123
1124 static int __init resume_setup(char *str)
1125 {
1126 if (noresume)
1127 return 1;
1128
1129 strncpy( resume_file, str, 255 );
1130 return 1;
1131 }
1132
1133 static int __init resume_offset_setup(char *str)
1134 {
1135 unsigned long long offset;
1136
1137 if (noresume)
1138 return 1;
1139
1140 if (sscanf(str, "%llu", &offset) == 1)
1141 swsusp_resume_block = offset;
1142
1143 return 1;
1144 }
1145
1146 static int __init hibernate_setup(char *str)
1147 {
1148 if (!strncmp(str, "noresume", 8)) {
1149 noresume = 1;
1150 } else if (!strncmp(str, "nocompress", 10)) {
1151 nocompress = 1;
1152 } else if (!strncmp(str, "no", 2)) {
1153 noresume = 1;
1154 nohibernate = 1;
1155 } else if (IS_ENABLED(CONFIG_STRICT_KERNEL_RWX)
1156 && !strncmp(str, "protect_image", 13)) {
1157 enable_restore_image_protection();
1158 }
1159 return 1;
1160 }
1161
1162 static int __init noresume_setup(char *str)
1163 {
1164 noresume = 1;
1165 return 1;
1166 }
1167
1168 static int __init resumewait_setup(char *str)
1169 {
1170 resume_wait = 1;
1171 return 1;
1172 }
1173
1174 static int __init resumedelay_setup(char *str)
1175 {
1176 int rc = kstrtouint(str, 0, &resume_delay);
1177
1178 if (rc)
1179 return rc;
1180 return 1;
1181 }
1182
1183 static int __init nohibernate_setup(char *str)
1184 {
1185 noresume = 1;
1186 nohibernate = 1;
1187 return 1;
1188 }
1189
1190 __setup("noresume", noresume_setup);
1191 __setup("resume_offset=", resume_offset_setup);
1192 __setup("resume=", resume_setup);
1193 __setup("hibernate=", hibernate_setup);
1194 __setup("resumewait", resumewait_setup);
1195 __setup("resumedelay=", resumedelay_setup);
1196 __setup("nohibernate", nohibernate_setup);