Merge tag 'kvm-s390-next-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git...

[mirror_ubuntu-jammy-kernel.git] / kernel / watchdog.c

// SPDX-License-Identifier: GPL-2.0
/*
 * Detect hard and soft lockups on a system
 *
 * started by Don Zickus, Copyright (C) 2010 Red Hat, Inc.
 *
 * Note: Most of this code is borrowed heavily from the original softlockup
 * detector, so thanks to Ingo for the initial implementation.
 * Some chunks also taken from the old x86-specific nmi watchdog code, thanks
 * to those contributors as well.
 */

#define pr_fmt(fmt) "watchdog: " fmt

#include <linux/mm.h>
#include <linux/cpu.h>
#include <linux/nmi.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/sysctl.h>
#include <linux/tick.h>
#include <linux/sched/clock.h>
#include <linux/sched/debug.h>
#include <linux/sched/isolation.h>
#include <linux/stop_machine.h>

#include <asm/irq_regs.h>
#include <linux/kvm_para.h>

static DEFINE_MUTEX(watchdog_mutex);

#if defined(CONFIG_HARDLOCKUP_DETECTOR) || defined(CONFIG_HAVE_NMI_WATCHDOG)
# define WATCHDOG_DEFAULT       (SOFT_WATCHDOG_ENABLED | NMI_WATCHDOG_ENABLED)
# define NMI_WATCHDOG_DEFAULT   1
#else
# define WATCHDOG_DEFAULT       (SOFT_WATCHDOG_ENABLED)
# define NMI_WATCHDOG_DEFAULT   0
#endif

unsigned long __read_mostly watchdog_enabled;
int __read_mostly watchdog_user_enabled = 1;
int __read_mostly nmi_watchdog_user_enabled = NMI_WATCHDOG_DEFAULT;
int __read_mostly soft_watchdog_user_enabled = 1;
int __read_mostly watchdog_thresh = 10;
static int __read_mostly nmi_watchdog_available;

struct cpumask watchdog_cpumask __read_mostly;
unsigned long *watchdog_cpumask_bits = cpumask_bits(&watchdog_cpumask);

#ifdef CONFIG_HARDLOCKUP_DETECTOR

# ifdef CONFIG_SMP
int __read_mostly sysctl_hardlockup_all_cpu_backtrace;
# endif /* CONFIG_SMP */

/*
 * Should we panic when a soft-lockup or hard-lockup occurs:
 */
unsigned int __read_mostly hardlockup_panic =
                        CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE;
/*
 * We may not want to enable hard lockup detection by default in all cases,
 * for example when running the kernel as a guest on a hypervisor. In these
 * cases this function can be called to disable hard lockup detection. This
 * function should only be executed once by the boot processor before the
 * kernel command line parameters are parsed, because otherwise it is not
 * possible to override this in hardlockup_panic_setup().
 */
void __init hardlockup_detector_disable(void)
{
        nmi_watchdog_user_enabled = 0;
}

static int __init hardlockup_panic_setup(char *str)
{
        if (!strncmp(str, "panic", 5))
                hardlockup_panic = 1;
        else if (!strncmp(str, "nopanic", 7))
                hardlockup_panic = 0;
        else if (!strncmp(str, "0", 1))
                nmi_watchdog_user_enabled = 0;
        else if (!strncmp(str, "1", 1))
                nmi_watchdog_user_enabled = 1;
        return 1;
}
__setup("nmi_watchdog=", hardlockup_panic_setup);

#endif /* CONFIG_HARDLOCKUP_DETECTOR */

/*
 * These functions can be overridden if an architecture implements its
 * own hardlockup detector.
 *
 * watchdog_nmi_enable/disable can be implemented to start and stop when
 * softlockup watchdog start and stop. The arch must select the
 * SOFTLOCKUP_DETECTOR Kconfig.
 */
int __weak watchdog_nmi_enable(unsigned int cpu)
{
        hardlockup_detector_perf_enable();
        return 0;
}

void __weak watchdog_nmi_disable(unsigned int cpu)
{
        hardlockup_detector_perf_disable();
}

/* Return 0, if a NMI watchdog is available. Error code otherwise */
int __weak __init watchdog_nmi_probe(void)
{
        return hardlockup_detector_perf_init();
}

/**
 * watchdog_nmi_stop - Stop the watchdog for reconfiguration
 *
 * The reconfiguration steps are:
 * watchdog_nmi_stop();
 * update_variables();
 * watchdog_nmi_start();
 */
void __weak watchdog_nmi_stop(void) { }

/**
 * watchdog_nmi_start - Start the watchdog after reconfiguration
 *
 * Counterpart to watchdog_nmi_stop().
 *
 * The following variables have been updated in update_variables() and
 * contain the currently valid configuration:
 * - watchdog_enabled
 * - watchdog_thresh
 * - watchdog_cpumask
 */
void __weak watchdog_nmi_start(void) { }

/**
 * lockup_detector_update_enable - Update the sysctl enable bit
 *
 * Caller needs to make sure that the NMI/perf watchdogs are off, so this
 * can't race with watchdog_nmi_disable().
 */
static void lockup_detector_update_enable(void)
{
        watchdog_enabled = 0;
        if (!watchdog_user_enabled)
                return;
        if (nmi_watchdog_available && nmi_watchdog_user_enabled)
                watchdog_enabled |= NMI_WATCHDOG_ENABLED;
        if (soft_watchdog_user_enabled)
                watchdog_enabled |= SOFT_WATCHDOG_ENABLED;
}

#ifdef CONFIG_SOFTLOCKUP_DETECTOR

/*
 * Delay the soflockup report when running a known slow code.
 * It does _not_ affect the timestamp of the last successdul reschedule.
 */
#define SOFTLOCKUP_DELAY_REPORT ULONG_MAX

#ifdef CONFIG_SMP
int __read_mostly sysctl_softlockup_all_cpu_backtrace;
#endif

static struct cpumask watchdog_allowed_mask __read_mostly;

/* Global variables, exported for sysctl */
unsigned int __read_mostly softlockup_panic =
                        CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE;

static bool softlockup_initialized __read_mostly;
static u64 __read_mostly sample_period;

/* Timestamp taken after the last successful reschedule. */
static DEFINE_PER_CPU(unsigned long, watchdog_touch_ts);
/* Timestamp of the last softlockup report. */
static DEFINE_PER_CPU(unsigned long, watchdog_report_ts);
static DEFINE_PER_CPU(struct hrtimer, watchdog_hrtimer);
static DEFINE_PER_CPU(bool, softlockup_touch_sync);
static DEFINE_PER_CPU(unsigned long, hrtimer_interrupts);
static DEFINE_PER_CPU(unsigned long, hrtimer_interrupts_saved);
static unsigned long soft_lockup_nmi_warn;

static int __init nowatchdog_setup(char *str)
{
        watchdog_user_enabled = 0;
        return 1;
}
__setup("nowatchdog", nowatchdog_setup);

static int __init nosoftlockup_setup(char *str)
{
        soft_watchdog_user_enabled = 0;
        return 1;
}
__setup("nosoftlockup", nosoftlockup_setup);

static int __init watchdog_thresh_setup(char *str)
{
        get_option(&str, &watchdog_thresh);
        return 1;
}
__setup("watchdog_thresh=", watchdog_thresh_setup);

static void __lockup_detector_cleanup(void);

/*
 * Hard-lockup warnings should be triggered after just a few seconds. Soft-
 * lockups can have false positives under extreme conditions. So we generally
 * want a higher threshold for soft lockups than for hard lockups. So we couple
 * the thresholds with a factor: we make the soft threshold twice the amount of
 * time the hard threshold is.
 */
static int get_softlockup_thresh(void)
{
        return watchdog_thresh * 2;
}

/*
 * Returns seconds, approximately.  We don't need nanosecond
 * resolution, and we don't need to waste time with a big divide when
 * 2^30ns == 1.074s.
 */
static unsigned long get_timestamp(void)
{
        return running_clock() >> 30LL;  /* 2^30 ~= 10^9 */
}

static void set_sample_period(void)
{
        /*
         * convert watchdog_thresh from seconds to ns
         * the divide by 5 is to give hrtimer several chances (two
         * or three with the current relation between the soft
         * and hard thresholds) to increment before the
         * hardlockup detector generates a warning
         */
        sample_period = get_softlockup_thresh() * ((u64)NSEC_PER_SEC / 5);
        watchdog_update_hrtimer_threshold(sample_period);
}

static void update_report_ts(void)
{
        __this_cpu_write(watchdog_report_ts, get_timestamp());
}

/* Commands for resetting the watchdog */
static void update_touch_ts(void)
{
        __this_cpu_write(watchdog_touch_ts, get_timestamp());
        update_report_ts();
}

/**
 * touch_softlockup_watchdog_sched - touch watchdog on scheduler stalls
 *
 * Call when the scheduler may have stalled for legitimate reasons
 * preventing the watchdog task from executing - e.g. the scheduler
 * entering idle state.  This should only be used for scheduler events.
 * Use touch_softlockup_watchdog() for everything else.
 */
notrace void touch_softlockup_watchdog_sched(void)
{
        /*
         * Preemption can be enabled.  It doesn't matter which CPU's watchdog
         * report period gets restarted here, so use the raw_ operation.
         */
        raw_cpu_write(watchdog_report_ts, SOFTLOCKUP_DELAY_REPORT);
}

notrace void touch_softlockup_watchdog(void)
{
        touch_softlockup_watchdog_sched();
        wq_watchdog_touch(raw_smp_processor_id());
}
EXPORT_SYMBOL(touch_softlockup_watchdog);

void touch_all_softlockup_watchdogs(void)
{
        int cpu;

        /*
         * watchdog_mutex cannpt be taken here, as this might be called
         * from (soft)interrupt context, so the access to
         * watchdog_allowed_cpumask might race with a concurrent update.
         *
         * The watchdog time stamp can race against a concurrent real
         * update as well, the only side effect might be a cycle delay for
         * the softlockup check.
         */
        for_each_cpu(cpu, &watchdog_allowed_mask) {
                per_cpu(watchdog_report_ts, cpu) = SOFTLOCKUP_DELAY_REPORT;
                wq_watchdog_touch(cpu);
        }
}

void touch_softlockup_watchdog_sync(void)
{
        __this_cpu_write(softlockup_touch_sync, true);
        __this_cpu_write(watchdog_report_ts, SOFTLOCKUP_DELAY_REPORT);
}

static int is_softlockup(unsigned long touch_ts,
                         unsigned long period_ts,
                         unsigned long now)
{
        if ((watchdog_enabled & SOFT_WATCHDOG_ENABLED) && watchdog_thresh){
                /* Warn about unreasonable delays. */
                if (time_after(now, period_ts + get_softlockup_thresh()))
                        return now - touch_ts;
        }
        return 0;
}

/* watchdog detector functions */
bool is_hardlockup(void)
{
        unsigned long hrint = __this_cpu_read(hrtimer_interrupts);

        if (__this_cpu_read(hrtimer_interrupts_saved) == hrint)
                return true;

        __this_cpu_write(hrtimer_interrupts_saved, hrint);
        return false;
}

static void watchdog_interrupt_count(void)
{
        __this_cpu_inc(hrtimer_interrupts);
}

static DEFINE_PER_CPU(struct completion, softlockup_completion);
static DEFINE_PER_CPU(struct cpu_stop_work, softlockup_stop_work);

/*
 * The watchdog feed function - touches the timestamp.
 *
 * It only runs once every sample_period seconds (4 seconds by
 * default) to reset the softlockup timestamp. If this gets delayed
 * for more than 2*watchdog_thresh seconds then the debug-printout
 * triggers in watchdog_timer_fn().
 */
static int softlockup_fn(void *data)
{
        update_touch_ts();
        complete(this_cpu_ptr(&softlockup_completion));

        return 0;
}

/* watchdog kicker functions */
static enum hrtimer_restart watchdog_timer_fn(struct hrtimer *hrtimer)
{
        unsigned long touch_ts, period_ts, now;
        struct pt_regs *regs = get_irq_regs();
        int duration;
        int softlockup_all_cpu_backtrace = sysctl_softlockup_all_cpu_backtrace;

        if (!watchdog_enabled)
                return HRTIMER_NORESTART;

        /* kick the hardlockup detector */
        watchdog_interrupt_count();

        /* kick the softlockup detector */
        if (completion_done(this_cpu_ptr(&softlockup_completion))) {
                reinit_completion(this_cpu_ptr(&softlockup_completion));
                stop_one_cpu_nowait(smp_processor_id(),
                                softlockup_fn, NULL,
                                this_cpu_ptr(&softlockup_stop_work));
        }

        /* .. and repeat */
        hrtimer_forward_now(hrtimer, ns_to_ktime(sample_period));

        /*
         * Read the current timestamp first. It might become invalid anytime
         * when a virtual machine is stopped by the host or when the watchog
         * is touched from NMI.
         */
        now = get_timestamp();
        /*
         * If a virtual machine is stopped by the host it can look to
         * the watchdog like a soft lockup. This function touches the watchdog.
         */
        kvm_check_and_clear_guest_paused();
        /*
         * The stored timestamp is comparable with @now only when not touched.
         * It might get touched anytime from NMI. Make sure that is_softlockup()
         * uses the same (valid) value.
         */
        period_ts = READ_ONCE(*this_cpu_ptr(&watchdog_report_ts));

        /* Reset the interval when touched by known problematic code. */
        if (period_ts == SOFTLOCKUP_DELAY_REPORT) {
                if (unlikely(__this_cpu_read(softlockup_touch_sync))) {
                        /*
                         * If the time stamp was touched atomically
                         * make sure the scheduler tick is up to date.
                         */
                        __this_cpu_write(softlockup_touch_sync, false);
                        sched_clock_tick();
                }

                update_report_ts();
                return HRTIMER_RESTART;
        }

        /* Check for a softlockup. */
        touch_ts = __this_cpu_read(watchdog_touch_ts);
        duration = is_softlockup(touch_ts, period_ts, now);
        if (unlikely(duration)) {
                /*
                 * Prevent multiple soft-lockup reports if one cpu is already
                 * engaged in dumping all cpu back traces.
                 */
                if (softlockup_all_cpu_backtrace) {
                        if (test_and_set_bit_lock(0, &soft_lockup_nmi_warn))
                                return HRTIMER_RESTART;
                }

                /* Start period for the next softlockup warning. */
                update_report_ts();

                pr_emerg("BUG: soft lockup - CPU#%d stuck for %us! [%s:%d]\n",
                        smp_processor_id(), duration,
                        current->comm, task_pid_nr(current));
                print_modules();
                print_irqtrace_events(current);
                if (regs)
                        show_regs(regs);
                else
                        dump_stack();

                if (softlockup_all_cpu_backtrace) {
                        trigger_allbutself_cpu_backtrace();
                        clear_bit_unlock(0, &soft_lockup_nmi_warn);
                }

                add_taint(TAINT_SOFTLOCKUP, LOCKDEP_STILL_OK);
                if (softlockup_panic)
                        panic("softlockup: hung tasks");
        }

        return HRTIMER_RESTART;
}

static void watchdog_enable(unsigned int cpu)
{
        struct hrtimer *hrtimer = this_cpu_ptr(&watchdog_hrtimer);
        struct completion *done = this_cpu_ptr(&softlockup_completion);

        WARN_ON_ONCE(cpu != smp_processor_id());

        init_completion(done);
        complete(done);

        /*
         * Start the timer first to prevent the NMI watchdog triggering
         * before the timer has a chance to fire.
         */
        hrtimer_init(hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL_HARD);
        hrtimer->function = watchdog_timer_fn;
        hrtimer_start(hrtimer, ns_to_ktime(sample_period),
                      HRTIMER_MODE_REL_PINNED_HARD);

        /* Initialize timestamp */
        update_touch_ts();
        /* Enable the perf event */
        if (watchdog_enabled & NMI_WATCHDOG_ENABLED)
                watchdog_nmi_enable(cpu);
}

static void watchdog_disable(unsigned int cpu)
{
        struct hrtimer *hrtimer = this_cpu_ptr(&watchdog_hrtimer);

        WARN_ON_ONCE(cpu != smp_processor_id());

        /*
         * Disable the perf event first. That prevents that a large delay
         * between disabling the timer and disabling the perf event causes
         * the perf NMI to detect a false positive.
         */
        watchdog_nmi_disable(cpu);
        hrtimer_cancel(hrtimer);
        wait_for_completion(this_cpu_ptr(&softlockup_completion));
}

static int softlockup_stop_fn(void *data)
{
        watchdog_disable(smp_processor_id());
        return 0;
}

static void softlockup_stop_all(void)
{
        int cpu;

        if (!softlockup_initialized)
                return;

        for_each_cpu(cpu, &watchdog_allowed_mask)
                smp_call_on_cpu(cpu, softlockup_stop_fn, NULL, false);

        cpumask_clear(&watchdog_allowed_mask);
}

static int softlockup_start_fn(void *data)
{
        watchdog_enable(smp_processor_id());
        return 0;
}

static void softlockup_start_all(void)
{
        int cpu;

        cpumask_copy(&watchdog_allowed_mask, &watchdog_cpumask);
        for_each_cpu(cpu, &watchdog_allowed_mask)
                smp_call_on_cpu(cpu, softlockup_start_fn, NULL, false);
}

int lockup_detector_online_cpu(unsigned int cpu)
{
        if (cpumask_test_cpu(cpu, &watchdog_allowed_mask))
                watchdog_enable(cpu);
        return 0;
}

int lockup_detector_offline_cpu(unsigned int cpu)
{
        if (cpumask_test_cpu(cpu, &watchdog_allowed_mask))
                watchdog_disable(cpu);
        return 0;
}

static void lockup_detector_reconfigure(void)
{
        cpus_read_lock();
        watchdog_nmi_stop();

        softlockup_stop_all();
        set_sample_period();
        lockup_detector_update_enable();
        if (watchdog_enabled && watchdog_thresh)
                softlockup_start_all();

        watchdog_nmi_start();
        cpus_read_unlock();
        /*
         * Must be called outside the cpus locked section to prevent
         * recursive locking in the perf code.
         */
        __lockup_detector_cleanup();
}

/*
 * Create the watchdog infrastructure and configure the detector(s).
 */
static __init void lockup_detector_setup(void)
{
        /*
         * If sysctl is off and watchdog got disabled on the command line,
         * nothing to do here.
         */
        lockup_detector_update_enable();

        if (!IS_ENABLED(CONFIG_SYSCTL) &&
            !(watchdog_enabled && watchdog_thresh))
                return;

        mutex_lock(&watchdog_mutex);
        lockup_detector_reconfigure();
        softlockup_initialized = true;
        mutex_unlock(&watchdog_mutex);
}

#else /* CONFIG_SOFTLOCKUP_DETECTOR */
static void lockup_detector_reconfigure(void)
{
        cpus_read_lock();
        watchdog_nmi_stop();
        lockup_detector_update_enable();
        watchdog_nmi_start();
        cpus_read_unlock();
}
static inline void lockup_detector_setup(void)
{
        lockup_detector_reconfigure();
}
#endif /* !CONFIG_SOFTLOCKUP_DETECTOR */

static void __lockup_detector_cleanup(void)
{
        lockdep_assert_held(&watchdog_mutex);
        hardlockup_detector_perf_cleanup();
}

/**
 * lockup_detector_cleanup - Cleanup after cpu hotplug or sysctl changes
 *
 * Caller must not hold the cpu hotplug rwsem.
 */
void lockup_detector_cleanup(void)
{
        mutex_lock(&watchdog_mutex);
        __lockup_detector_cleanup();
        mutex_unlock(&watchdog_mutex);
}

/**
 * lockup_detector_soft_poweroff - Interface to stop lockup detector(s)
 *
 * Special interface for parisc. It prevents lockup detector warnings from
 * the default pm_poweroff() function which busy loops forever.
 */
void lockup_detector_soft_poweroff(void)
{
        watchdog_enabled = 0;
}

#ifdef CONFIG_SYSCTL

/* Propagate any changes to the watchdog infrastructure */
static void proc_watchdog_update(void)
{
        /* Remove impossible cpus to keep sysctl output clean. */
        cpumask_and(&watchdog_cpumask, &watchdog_cpumask, cpu_possible_mask);
        lockup_detector_reconfigure();
}

/*
 * common function for watchdog, nmi_watchdog and soft_watchdog parameter
 *
 * caller             | table->data points to      | 'which'
 * -------------------|----------------------------|--------------------------
 * proc_watchdog      | watchdog_user_enabled      | NMI_WATCHDOG_ENABLED |
 *                    |                            | SOFT_WATCHDOG_ENABLED
 * -------------------|----------------------------|--------------------------
 * proc_nmi_watchdog  | nmi_watchdog_user_enabled  | NMI_WATCHDOG_ENABLED
 * -------------------|----------------------------|--------------------------
 * proc_soft_watchdog | soft_watchdog_user_enabled | SOFT_WATCHDOG_ENABLED
 */
static int proc_watchdog_common(int which, struct ctl_table *table, int write,
                                void *buffer, size_t *lenp, loff_t *ppos)
{
        int err, old, *param = table->data;

        mutex_lock(&watchdog_mutex);

        if (!write) {
                /*
                 * On read synchronize the userspace interface. This is a
                 * racy snapshot.
                 */
                *param = (watchdog_enabled & which) != 0;
                err = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
        } else {
                old = READ_ONCE(*param);
                err = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
                if (!err && old != READ_ONCE(*param))
                        proc_watchdog_update();
        }
        mutex_unlock(&watchdog_mutex);
        return err;
}

/*
 * /proc/sys/kernel/watchdog
 */
int proc_watchdog(struct ctl_table *table, int write,
                  void *buffer, size_t *lenp, loff_t *ppos)
{
        return proc_watchdog_common(NMI_WATCHDOG_ENABLED|SOFT_WATCHDOG_ENABLED,
                                    table, write, buffer, lenp, ppos);
}

/*
 * /proc/sys/kernel/nmi_watchdog
 */
int proc_nmi_watchdog(struct ctl_table *table, int write,
                      void *buffer, size_t *lenp, loff_t *ppos)
{
        if (!nmi_watchdog_available && write)
                return -ENOTSUPP;
        return proc_watchdog_common(NMI_WATCHDOG_ENABLED,
                                    table, write, buffer, lenp, ppos);
}

/*
 * /proc/sys/kernel/soft_watchdog
 */
int proc_soft_watchdog(struct ctl_table *table, int write,
                        void *buffer, size_t *lenp, loff_t *ppos)
{
        return proc_watchdog_common(SOFT_WATCHDOG_ENABLED,
                                    table, write, buffer, lenp, ppos);
}

/*
 * /proc/sys/kernel/watchdog_thresh
 */
int proc_watchdog_thresh(struct ctl_table *table, int write,
                         void *buffer, size_t *lenp, loff_t *ppos)
{
        int err, old;

        mutex_lock(&watchdog_mutex);

        old = READ_ONCE(watchdog_thresh);
        err = proc_dointvec_minmax(table, write, buffer, lenp, ppos);

        if (!err && write && old != READ_ONCE(watchdog_thresh))
                proc_watchdog_update();

        mutex_unlock(&watchdog_mutex);
        return err;
}

/*
 * The cpumask is the mask of possible cpus that the watchdog can run
 * on, not the mask of cpus it is actually running on.  This allows the
 * user to specify a mask that will include cpus that have not yet
 * been brought online, if desired.
 */
int proc_watchdog_cpumask(struct ctl_table *table, int write,
                          void *buffer, size_t *lenp, loff_t *ppos)
{
        int err;

        mutex_lock(&watchdog_mutex);

        err = proc_do_large_bitmap(table, write, buffer, lenp, ppos);
        if (!err && write)
                proc_watchdog_update();

        mutex_unlock(&watchdog_mutex);
        return err;
}
#endif /* CONFIG_SYSCTL */

void __init lockup_detector_init(void)
{
        if (tick_nohz_full_enabled())
                pr_info("Disabling watchdog on nohz_full cores by default\n");

        cpumask_copy(&watchdog_cpumask,
                     housekeeping_cpumask(HK_FLAG_TIMER));

        if (!watchdog_nmi_probe())
                nmi_watchdog_available = true;
        lockup_detector_setup();
}