1 2005-02-21 Vincenzo Eramo <eramo at infocom.ing.uniroma1.it>
3 * pqueue.[ch]: Introduce "update" function to meet ospf spf needs. It
4 will allow to update node when:
5 i) a node is inserted into the priority queue;
6 ii) a node position is modified in the priority queue;
7 * pqueue.h: Export trickle_down() function.
9 2005-02-19 Paul Jakma <paul.jakma@sun.com>
11 * stream.c: (stream_new) fix dumb mistake.
13 2005-02-17 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
15 * stream.c: (stream_read_try) Use new ERRNO_IO_RETRY macro.
17 2005-02-17 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
19 * network.h: Define a new ERRNO_IO_RETRY macro to test whether an I/O
20 operation should be retried. This eliminates the need to duplicate
21 the same logic testing for EAGAIN or EINTR in multiple places.
23 2005-02-16 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
25 * stream.h: Declare new function stream_read_try suitable for use
26 with non-blocking file descriptors. Indicate that stream_read
27 and stream_read_unblock are deprecated.
28 * stream.c: (stream_read_try) New function for use with non-blocking
30 (stream_recvmsg) Should return -1 if the stream is too small to
33 2005-02-16 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
35 * network.c: (set_nonblocking) Should check return code from
38 2005-02-15 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
40 * network.h: Declare new function set_nonblocking. Indicate that
41 readn and writen are deprecated.
42 * network.c: (set_nonblocking) New function to make a file descriptor
43 non-blocking, since it seems silly to have fcntl calls sprinkled
46 2005-02-14 Paul Jakma <paul.jakma@sun.com>
48 * stream.h: Unsigned long updated to size_t
50 * stream.h: Add stream_copy, stream_dup, stream_recvmsg.
51 Add comment describing struct stream abstraction, and various
53 Deprecate several unsafe/ambigious macros.
54 Add STREAM_WRITEABLE and STREAM_READABLE.
55 Add (stream_getl_from) for symmetry.
56 Update stream_forward_{endp,getp} to use size_t offset.
57 Make stream data a 0 length array, rather than a seperate malloc.
58 * stream.c: Add consistency checks. Update to follow stream.h
60 (stream_new) Alloc stream+data in one go.
61 (stream_copy) new function, copy a stream.
62 (stream_dup) new function, dup a stream.
63 (stream_recvmsg) new function, recvmsg data into a stream.
64 (stream_empty) no need to check getp == 0.
66 2005-02-09 Paul Jakma <paul.jakma@sun.com>
68 * stream.h: Remove putp. Update reference to putp with endp.
69 Add stream_forward_endp, which daemons were doing manually.
70 Rename stream_forward to stream_forward_getp.
71 stream.c: Remove/update references to putp.
72 introduce stream_forward_endp.
74 2005-02-08 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
76 * zebra.h: Change macro definitions SET_FLAG and UNSET_FLAG
77 to use compound assignment operators (aesthetic change).
79 2005-02-03 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
81 * log.c: (zlog_signal,zlog_backtrace_sigsafe) Eliminate use of fileno()
82 since it is not async-signal-safe.
83 (_zlog_assert_failed) Rewrite crashlog logic more compactly.
84 (zlog_set_file,zlog_reset_file,zlog_rotate) Update logfile_fd
85 for use in signal handler.
87 2005-02-03 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
89 * log.c: (syslog_sigsafe) Reduce scope of syslog_fd: it is accessed
90 inside this function only.
91 (open_crashlog) New function to open /var/tmp/quagga.<daemon>.crashlog
92 with flags O_WRONLY|O_CREAT|O_EXCL to save some crash info.
93 (zlog_signal,_zlog_assert_failed) Increase logging priority from
94 LOG_ERR to LOG_CRIT. If no file logging is configured, try to use
95 open_crashlog to create a crash logfile.
96 (zlog_backtrace_sigsafe) If a crashlog file descriptor is open,
97 dump a backtrace to that file.
99 2005-02-02 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
101 * if.h: Declare if_flag_dump.
103 2005-01-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
105 * daemon.c: (daemon) Replace perror with zlog_err.
106 * vty.c: (vty_serv_un) Replace perror with zlog_err.
108 2005-01-29 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
110 * buffer.h: Fix comment on buffer_getstr to reflect that it now
112 * buffer.c: (buffer_getstr) Use XMALLOC(MTYPE_TMP) instead of malloc.
113 * filter.c: (access_list_remark,ipv6_access_list_remark) Use
114 argv_concat instead of buffer_getstr.
115 * if.c: (interface_desc) Use argv_concat instead of buffer_getstr.
116 * plist.c: (ip_prefix_list_description,ipv6_prefix_list_description)
117 Use argv_concat instead of buffer_getstr.
119 2005-01-28 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
121 * lib/buffer.h: Document behavior of buffer_getstr function.
122 * lib/buffer.c: (buffer_getstr) Fix bug: must handle case where
123 the string extends beyond the head struct buffer_data.
125 2005-01-28 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
127 * lib/command.h: Document behavior of argv_concat function.
128 * lib/command.c: (argv_concat) Calculate total string length first so
129 we can call malloc just once (instead of realloc'ing to add each
131 (do_echo,config_logmsg) Allow for possible NULL return value from
134 2005-01-23 Hasso Tepper <hasso at quagga.net>
136 * lib/command.[ch]: Make node_parent() function nonstatic. vtyh.c will
139 2005-01-18 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
141 * log.h: Test for SA_SIGINFO to see whether zlog_signal takes final
142 two args (siginfo and program_counter).
143 * log.c: (hex_append) Include this function only if SA_SIGINFO or
144 HAVE_GLIBC_BACKTRACE is defined.
145 (zlog_signal) Final two args (siginfo and program_counter) now
146 depend on whether SA_SIGINFO is defined on this platform.
147 * sigevent.c: (program_counter) Do not include this function if
148 SA_SIGINFO is not defined on this platform.
149 (exit_handler,core_handler) Test for SA_SIGINFO to decide whether
150 2nd & 3rd arguments are present and to decide how to invoke
152 (trap_default_signals) Test for SA_SIGINFO and invoke sigaction
155 2005-01-17 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
157 * log.h: Change prototype for zlog_backtrace_sigsafe to take additional
158 program_counter argument.
159 * log.c: (zlog_backtrace_sigsafe) Add additional program_counter
160 argument. If it is non-NULL, use backtrace_symbols_fd to resolve
162 (zlog_signal) Call zlog_backtrace_sigsafe with additional
163 program_counter argument.
165 2005-01-17 Hasso Tepper <hasso at quagga.net>
167 * command.[ch], vty.c: cmd_execute_command() function must not attempt
168 to walk up in the node tree if called from vtysh. Different daemons
169 might have commands with same syntax in different nodes (for example
170 "router-id x.x.x.x" commands in zebra/ospfd/ospf6d daemons).
172 2005-01-14 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
174 * command.c (print_version): Do not bother even to examine host.name,
175 since it is always NULL when this function is called from main.
177 2005-01-14 Greg Troxel <gdt@fnord.ir.bbn.com>
179 * command.c (print_version): Don't print host.name if it is NULL.
180 Fixes segfault on Solaris reported by Goetz von Escher <goetz@open.ch>
182 2005-01-12 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
184 * sigevent.c: (trap_default_signals) Use the SA_SIGINFO flag to
185 pass additional siginfo_t and ucontext_t arguments to core_handler
187 (core_handler,exit_handler) Now invoked with 3 arguments (using
188 SA_SIGINFO). Pass additional info to zlog_signal.
189 (program_counter) New function to find program counter in ucontext_t,
190 needs to be enhanced to support more platforms (currently works only
192 * log.h: Change the zlog_signal prototype to add new arguments
193 siginfo_t * and program_counter.
194 * log.c: (zlog_signal) Add new arguments siginfo and program_counter.
195 Include si_addr and program counter (if non-NULL) in message.
196 And remove #ifdef HAVE_GLIBC_BACKTRACE around hex_append, since
197 that is now used to render the si_addr and PC pointers.
199 2005-01-12 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
201 * zebra.h: If not C99 and no va_copy macro available, fall back to
202 memcpy (solves a build problem on FreeBSD 4.x).
204 2005-01-04 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
206 * zebra.h: Define ZCMSG_FIRSTHDR appropriately based on whether
207 config.h indicates HAVE_BROKEN_CMSG_FIRSTHDR (as determined
208 by the configure test program).
209 * sockopt.c: (getsockopt_cmsg_data) Use ZCMSG_FIRSTHDR instead
212 2005-01-02 Hasso Tepper <hasso at quagga.net>
214 * command.c: Revert int -> unsigned int fixes in
215 cmd_describe_command_real() and cmd_complete_command_real(). index can
216 be actually negative and it caused crash with "do<TAB>" in vty.
218 2004-12-29 Greg Troxel <gdt@poblano.ir.bbn.com>
220 * sockopt.c (getsockopt_ipv4_ifindex): Document calling
221 convention. Beef up comments. Handle the case where the cmsghdr
222 has a zero controllen, or more specifically when the wanted option
223 is not present. This is needed for Solaris 8, and in general for
224 any platform for which configure finds a method and it can fail.
225 Mark some changes with XXX to be cleaned up post 0.98.
227 2004-12-28 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
229 * sockopt.c: (setsockopt_ipv4_ifindex) Improve error message.
230 When neither IP_PKTINFO nor IP_RECVIF is defined, make return value
233 2004-12-28 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
235 * thread.c: (funcname_thread_add_timer_msec) Reduce overflow risk.
237 2004-12-21 Paul Jakma <paul.jakma@sun.com>
239 * if.h: Add more 'non-generic' IFF_ flags.
240 * if.c: IFF_NOXMIT/IFF_VIRTUAL interfaces are 'loopback like'
241 * stream.c: Dont allocate streams with 0 sized data buffers
243 2004-12-17 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
245 * command.c: (do_echo) Added new "echo" command, useful for
246 watchdog pinging to make sure the daemon is responsive.
248 2004-12-17 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
250 * pid_output.c: (pid_output_lock) Eliminate static function, and just
251 use the #ifdef to decide which version of the function to include.
252 This eliminates a compilation problem with gcc4. And fix the
253 non-fcntl version so that it actually compiles. Exit with
254 status 1 instead of -1 on error.
256 2004-12-15 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
258 * sigevent.c: (trap_default_signals) Ignore SIGPIPE instead of exiting.
260 2004-12-10 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
262 * log.c: (zlog_signal,_zlog_assert_failed) Change logging level back to
263 LOG_ERR instead of LOG_EMERG.
265 2004-12-09 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
267 * log.c: (hex_append) No need to include this function if
268 HAVE_GLIBC_BACKTRACE is not defined.
270 2004-12-08 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
272 * prefix.c: (prefix_copy) Error message before abort should
273 have severity LOG_ERR, not LOG_INFO.
274 * memory.c: (mtype_log) Log level should be LOG_DEBUG, not LOG_INFO.
276 2004-12-07 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
278 * {smux.c,zclient.c}: Change level of debug messages to LOG_DEBUG.
280 2004-12-07 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
282 * command.c: (config_write_host) Note that "log trap" is deprecated
283 when writing out the config.
285 2004-12-07 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
287 * log.h: Replace struct zlog flags and maskpri fields with maxlvl
288 array to support individual logging levels for each destination.
289 Remove the 2nd argument to openzlog since the default logging config
290 should be standardized inside the library. Replaced the
291 zlog_set_flag and zlog_reset_flag functions with zlog_set_level.
292 And zlog_set_file now requires an additional log_level argument.
293 Declare zlog_proto_names for use inside command.c in the
294 "show logging" command. Added defines useful for command
296 * log.c: (vzlog) Decide where to send the message based on the
297 individual logging levels configured for each destination.
298 Remove support for ZLOG_STDERR since it was never actually used.
299 Support record-priority for terminal monitors.
300 (zlog_signal,zlog_backtrace_sigsafe) Support destination-specific
301 logging levels. Remove stderr support (was never used). Added
302 support for terminal monitor logging.
303 (_zlog_assert_failed) Increase message severity to LOG_EMERG.
304 (openzlog) Remove 2nd argument since default config should be
305 standardized in library. By default, terminal monitoring
306 is set to debug, and all other logging is disabled.
307 (zlog_set_flag,zlog_reset_flag) Removed.
308 (zlog_set_level) New function to replace zlog_set_flag and
309 zlog_reset_flag. Supports destination-specific logging levels.
310 (zlog_set_file,zlog_reset_file) Support file-specific logging level.
311 (zlog_rotate) Log an error message if fopen fails, and support
312 new file-specific logging level.
313 * command.h: Change DEFUN_CMD_FUNC_DECL and DEFUN_CMD_FUNC_TEXT so that
314 command functions will be static instead of global. Remove
315 declarations for config_exit and config_help. Define new macros
316 DEFUNSH_ATTR, DEFUNSH_HIDDEN, and DEFUNSH_DEPRECATED so we can
317 have deprecated commands in vtysh. Similarly, for completeness,
318 define macros ALIAS_SH, ALIAS_SH_HIDDEN, and ALIAS_SH_DEPRECATED.
319 Also, fix bug in ALIAS_ATTR macro (didn't matter because it
321 * command.c: Make many functions static instead of global.
322 (facility_name,facility_match,level_match) New functions
323 to support enhanced destination-specific logging levels.
324 (config_write_host) Support new destination-specific logging levels.
325 (config_logmsg) Added new "logmsg" command to help test logging
327 (show_logging) Added "show logging" command to show the current
328 configuration of the logging system.
329 (config_log_stdout_level) Support explicit stdout logging level.
330 (no_config_log_stdout) Now takes optional LEVEL arg.
331 (config_log_monitor,config_log_monitor_level,no_config_log_monitor)
332 New commands creating new "log monitor" commands to set terminal
333 monitoring log level.
334 (config_log_file_level) Support explicit file logging level.
335 (config_log_syslog_level) Support explicit syslog logging level.
336 (config_log_facility,no_config_log_facility) Implement new
337 "log facility" command.
338 (cmd_init) Add hooks for new commands: "show logging", "logmsg",
339 "log stdout <level>", "log monitor", "log monitor <level>",
340 "no log monitor", "log file <filename> <level>",
341 "no log file <filename> <level>", "log syslog <level>",
342 "log facility", and "no log facility".
343 * vty.h: Added a "level" argument to vty_log so it can support
344 "log record-priority". Declare new function vty_log_fixed for
345 use in signal handlers.
346 * vty.c: (vty_log,vty_log_out) Added a "level" argument to support
347 "log record-priority" for vty terminal monitors.
348 (vty_down_level) Use config_exit_cmd.func instead of calling
349 config_exit directly (since command functions will now be static
351 (vty_log_fixed) New function to send terminal monitor messages
352 from inside a signal handler.
354 2004-12-03 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
356 * log.h: Document appropriate use of syslog logging priorities
359 2004-12-03 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
361 * command.h: Remove fields log_stdout and log_syslog from struct host,
362 since they are just trying to duplicate information in the
363 zlog_default structure. Note that this fixes a bug since those
364 fields were not registering any logging that was established
365 in the initial call to openzlog (this affects only the zebra and
366 ospf6d daemons). It is probably a bug to turn on any logging by
367 default in the call to openzlog.
368 * command.c: (config_write_host) Get logging info from zlog_default
369 instead of now-removed fields host.log_stdout and host.log_syslog.
370 (config_log_stdout,no_config_log_stdout) Do not set now-removed field
371 host.log_stdout, since this info is recorded in zlog_default.
372 (config_log_file) Use XSTRDUP (instead of strdup) to set host.logfile.
373 (config_log_syslog,config_log_syslog_facility,no_config_log_syslog)
374 Do not set now-removed field host.log_syslog, since this info is
375 recorded in zlog_default.
377 2004-12-03 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
379 * version.h.in: Remove declaration for pid_output_lock, this function
380 is now static, not global.
381 * pid_output.c: (pid_output_lock) This function should be static, not
382 global. And remove "old umask" error message, since it was really
383 an unimportant debug message, not an error.
384 (pid_output) Need to declare static function pid_output_lock.
386 2004-11-28 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
388 * log.h: Remove several unused fields from struct zlog. Add comments
389 for other fields, and add one new field syslog_options that is
390 used in the new syslog_sigsafe implementation.
391 * log.c: (syslog_sigsafe) New function to send syslog messages in
392 an async-signal safe way that can be used inside a signal handler.
393 (syslog_connect) New function to connect to syslog daemon inside a
394 signal handler. This function supports only systems where /dev/log
395 is a unix datagram socket (e.g. not Solaris).
396 (zlog_signal) Call syslog_sigsafe if syslog logging is enabled.
397 (zlog_backtrace_sigsafe) Call syslog_sigsafe if syslog logging is
399 (openzlog) Save syslog_options for use in syslog_sigsafe.
400 (num_append) Fix bug: handle 0 properly.
401 (hex_append) New function to print a u_long in hex format.
403 2004-11-28 Hasso Tepper <hasso at quagga.net>
405 * command.h: DEFUN_DEPRECATED passes attribute to DEFUN as well.
407 2004-11-26 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
409 * log.c, log.h, memory.c: Change function name from zlog_backtrace_safe
410 to the more self-explanatory zlog_backtrace_sigsafe.
412 2004-11-26 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
414 * debug.[ch]: Remove unused files.
415 * Makefile.am: Remove references to debug.c and debug.h
417 2004-11-26 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
419 * log.c: (zlog_backtrace) New function to log a backtrace.
420 (zlog_backtrace_safe) Log a backtrace in an async-signal-safe way.
421 Unfortunately, this function does not support syslog logging yet.
422 (zlog_signal) Move backtrace code into separate function
424 (_zlog_assert_failed) Call zlog_backtrace before aborting.
425 * log.h: Declare new functions zlog_backtrace and zlog_backtrace_safe.
426 * memory.c: (zerror) Call zlog_backtrace before aborting.
428 2004-11-26 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
430 * Makefile.am: Need to add zassert.h to pkginclude_HEADERS.
432 2004-11-25 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
434 * zebra.h: If not C99 and there's no va_copy macro and there is
435 a __va_copy macro, define va_copy as __va_copy.
437 2004-11-25 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
439 * pid_output.c: (pid_output_lock) Fix 2 bugs: when locking, should
440 set l_whence to SEEK_SET, not SEEK_END. And after writing new
441 pid to file, must ftruncate to eliminate any extraneous bytes left
442 over from the last time a pid was written.
444 2004-11-24 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
446 * zassert.h: New header file to declare a quagga-specific assert macro.
447 * log.c: (_zlog_assert_failed) New function called when assert fails
448 to log the error and abort.
449 * zebra.h: Include "zassert.h" instead of <assert.h>.
450 * regex.c: Include "zassert.h" instead of <assert.h>.
452 2004-11-23 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
454 * sigevent.c: (signal_init) Set up some default signal handlers
455 so that processes will issue an error message before terminating
457 (trap_default_signals) New function to set up signal handlers
458 for various signals that may kill the process.
459 (exit_handler) Call zlog_signal, then _exit.
460 (core_handler) Call zlog_signal, then abort.
461 * log.h: Declare new function zlog_signal.
462 * log.c: (zlog_signal) New function to log information about
463 a received signal before the process dies. Try to log a
465 (quagga_signal_handler,signal_set) Should be static.
467 2004-11-23 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
469 * log.c: (vzlog) Take a single va_list argument and use va_copy
470 as necessary for multiple traversals.
471 (zlog) Pass only one va_list to vzlog.
472 (zlog_*,plog_*) Use a macro for boilerplate code; pass only one
474 (zlog_set_file) Remove unused 2nd argument (flags).
475 (zlog_save_cwd,zlog_get_cwd,zlog_free_cwd) Remove unused functions.
476 * log.h: Remove ZLOG_*_INDEX defines (no longer used).
477 Remove unused 2nd argument from zlog_set_file prototype.
478 Fix prototype for zlog_rotate.
479 * command.c: (config_log_file) Remove unused 2nd arg to zlog_set_file.
480 * vty.c: (vty_out) Fix stdarg usage to perform multiple traversals
482 (vty_log) Must use va_copy for multiple traversals of va_list arg.
484 2004-11-19 David Young <dyoung@pobox.com>
486 * log.c: (safe_strerror) New function: safe wrapper for strerror.
488 2004-11-19 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
490 * sockopt.c: (setsockopt_so_recvbuf) Stop error message from being
493 2004-11-16 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
495 * memory.h: Fix prototype for memory_init().
496 * memory.c: Declare many functions and data structures static instead
497 of global. Fix prototype for memory_init().
499 2004-11-15 Greg Troxel <gdt@fnord.ir.bbn.com>
501 * sockopt.h: Avoid CMSG_ALIGN, and declare that sizes are without
502 alignment (users should use CMSG_SPACE).
504 * zebra.h: Rationalize CMSG_SPACE compatibility defines. Warn if
505 asumming 4-byte alignment, since this isn't safe.
507 2004-11-15 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
509 * memory.c: (zerror) Use zlog_err instead of fprintf to stderr.
510 Instead of exiting, log currenty memory usage and then abort.
511 (log_memstats) New function to log memory statistics, called by
513 (show_memory_all) Loop over new mlists array instead of calling
514 show_memory_vty separately for each memory_list.
516 2004-11-08 Paul Jakma <paul@dishone.st>
518 * buffer.c: Add missing include of log.h.
519 (buffer_flush_available) written is compared against
520 mostly against unsigned types, only for the writev do we need
521 signed compare, so declare it as size_t and cast it to ssize_t
522 just for the error compare when we've called writev.
523 * buffer.h: Add comment that buffer data sizes really should be
526 2004-11-07 Paul Jakma <paul@dishone.st>
528 * version.h.in: add autoconf configure_input output var
530 2004-11-04 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
532 * vty.h: Remove fields in struct vty that were related to VTY_CONTINUE
533 capabilities (that were used only in bgpd/bgp_route.c and are now
534 removed). Also remove some other fields that were not being
536 * vty.c: (vty_execute) Do not test for obsolete status values VTY_START
538 (vty_read) Remove calls to vty->output_func since that was part
539 of the VTY_CONTINUE infrastructure that has been removed.
540 (vty_flush) Remove code to support VTY_START and VTY_CONTINUE.
541 (vty_close) Remove code to cancel vty->t_output thread, since that
542 thread was never actually used.
544 2004-11-04 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
546 * vty.c: Vtysh connections to daemons should use buffering.
547 (vty_out) Remove exception for vty_shell_serv, just use buffer_write.
548 (vty_new) Increase output buffer size to 4096 rounded up to a
549 multiple of pagesize.
550 (vtysh_read) After command has been executed and all output buffered,
551 call buffer_flush_available and schedule further writes if the
552 buffers are not yet empty.
553 (vtysh_write) New function to flush output to vtysh when the socket
555 (vty_event) Added new VTYSH_WRITE event for flushing buffers to vtysh
556 clients. Also, should save read thread in vty->t_read so the
557 thread can be cancelled in vty_close.
558 * buffer.h: In struct buffer_data, remove unused "parent" field.
559 Convert "unsigned char *data" to "unsigned char data[0]" to save
560 a malloc. Declare new function buffer_flush_available that works
561 with non-blocking sockets.
562 * buffer.c: (buffer_data_new) Use a single malloc now that data is
563 a variable-size array at end of structure.
564 (buffer_data_free) Just a single free now that data is part of the
566 (buffer_write) Simplify the logic to make behavior more transparent.
567 (buffer_flush) Decrease b->length as data is written out.
568 (buffer_flush_vty_all) Decrease b->length as buffers are freed.
569 (buffer_flush_vty) Decrease b->length as data is written out.
570 (buffer_flush_available) New function to flush non-blocking sockets.
572 2004-11-01 Paul Jakma <paul@dishone.st>
574 * sockopt.c: (setsockopt_pktinfo) remove, its unused.
576 2004-10-31 Paul Jakma <paul@dishone.st>
578 * vty.c: As per Andrew's suggestions..
579 (vty_serv_un) remove flags.
580 (vtysh_accept) close socket if we cant set NONBLOCK. Add flags.
581 * keychain.c: Convert some more strtoul users to VTY_GET_INTEGER.
582 * memory.h: Add MTYPE_THREAD_FUNCNAME and MTYPE_THREAD_STATS
583 * thread.c: Update stats and funcname alloc/free to use previous
584 specific memory type defines. Use XCALLOC and sizeof the type,
586 * smux.c: fix int to size_t compile warnings
588 2004-10-29 Paul Jakma <paul@dishone.st>
590 * vty.c: Move setting of sock to O_NONBLOCK from vty_serv_un
591 to vtysh_accept, where sock is the actual fd we wanted to set to
592 O_NONBLOCK, ie the /connected/ vtysh unix socket.
594 2004-10-23 Hasso Tepper <hasso at quagga.net>
596 * zclient.c: Unbreak reading interface update message. Might fix
597 blocker bugzilla #109.
599 2004-10-22 Paul Jakma <paul@dishone.st>
601 * sockopt.c: (getsockopt_ipv4_ifindex) no ifindex should be 0, not
603 (setsockopt_pktinfo) unexported
604 * sockopt.h: Cleanup SOCKOPT_CMSG defines a bit. Add a throwaway
605 define for SOPT_SIZE_CMSG_IFINDEX_IPV4 for systems which have
606 neither IP_RECVIF nor IP_PKTINFO (eg openbsd), thanks to Rivo
607 Nurges for highlighting problem and fix.
608 Fix elif that should be an else.
609 * command.h: Cleanup the defines a bit, add helper defines and
610 collapse all defines to use those. Add an attribute field to
611 cmd_element to support, eg hidden or deprecated commands, add
612 defun defines for such. All that's left to do is add logic
613 to command.c to check these attributes... ;)
614 * zebra.h: reserve ZEBRA_ROUTE_HSLS
616 2004-10-19 Hasso Tepper <hasso at quagga.net>
618 * version.h.in: Define copyright string QUAGGA_COPYRIGHT.
619 * print_version.c: Remove. print_version () function moved to
621 * command.c: Use QUAGGA_COPYRIGHT.
622 * Makefile.am: Remove useless version.c and print_version.c files.
624 2004-10-19 Andrew J. Schorr <aschorr@telemetry-investments.com>
626 * zclient.c: (zebra_interface_address_read) If the destination address
627 is encoded as all zeroes, load it as a NULL pointer.
628 * if.h: Add comment describing struct connected destination field
629 and indicating that it may be NULL. Define macros
630 CONNECTED_DEST_HOST and CONNECTED_POINTOPOINT_HOST to help
631 with PtP logic (distinguish between host and subnet addressing).
632 * if.c: (if_lookup_address) Fix PtP logic to handle subnet addressing
634 (connected_lookup_address) ditto.
635 (connected_add_by_prefix) Handle case where destination is NULL,
636 * prefix.[c|h]: New functions ipv4_network_addr and
639 2004-10-13 Hasso Tepper <hasso at quagga.net>
641 * command.c: Make CMD_ERR_NOTHING_TODO nonfatal if reading
642 configuration from file. Fixes critical bugzilla #113.
643 * smux.c, smux.h: Remove all defaults to initialize smux connection to
644 snmpd by default even if not configured to do so. "smux peer OID
645 <password>" initializes now connection and "no smux peer" terminates
648 2004-10-13 Paul Jakma <paul@dishone.st>
650 * (global) more const'ification.
651 * sockunion.c: (sockunion_su2str) buffer should be sized
653 (sockunion_log) do not return stack variables, strdup buf before
655 * vty.h: Fix up the VTY_GET_INTEGER macros. Testing caller supplied
656 values against ULONG_MAX is daft, when caller probably has passed
657 a type that can not hold ULONG_MAX. use a temporary long instead.
658 Add VTY_GET_LONG, make VTY_GET_INTEGER_RANGE use it, make
659 VTY_GET_INTEGER a define for VTY_GET_INTEGER_RANGE.
661 2004-10-11 Hasso Tepper <hasso at quagga.net>
663 * command.h: Sync DEFUNSH with other macros.
664 * sockunion.c, sockunion.h: More const strings.
666 2004-10-11 Paul Jakma <paul@dishone.st>
668 * thread.c: (funcname_thread_add_timer)
669 (funcname_thread_add_timer_msec) Fix mistakes from last change.
670 Pointed out by Liu Xin in [quagga-dev 1609].
671 * if.h: mtu's should be unsigned.
672 * routemap.{c,h}: const char updates
675 2004-10-10 Paul Jakma <paul@dishone.st>
677 * version.h.in: (pid_output*) add const qualifier.
678 * command.h: Change DEFUN func to take const char *[] rather
679 than char **, to begin process of fixing compile warnings in lib/.
680 Nearly all other changes in this commit follow from this change.
681 * buffer.{c,h}: (buffer_write) pointer-arithmetic is gccism, take
682 const void * and cast an automatic const char *p to it.
683 (buffer_putstr) add const
684 * command.c: (zencrypt) const qualifier
685 (cmd_execute_command_real) ditto
686 (cmd_execute_command_strict) ditto
687 (config_log_file) ditto.
688 Fix leak of getcwd() returned string.
689 * memory.{c,h}: Add MTYPE_DISTRIBUTE_IFNAME for struct dist ifname.
690 * distribute.{c,h}: Update with const qualifier.
691 (distribute_free) use MTYPE_DISTRIBUTE_IFNAME
692 (distribute_lookup) Cast to char *, note that it's ok.
693 (distribute_hash_alloc) use MTYPE_DISTRIBUTE_IFNAME.
694 (distribute_get) Cast to char *, note that it's ok.
695 * filter.c: Update with const qualifier.
697 * if_rmap.{c,h}: ditto.
698 (if_rmap_lookup) Cast to char *, note that it's ok.
700 * log.{c,h}: Update with const qualifier.
701 * plist.{c,h}: ditto.
702 * routemap.{c,h}: ditto.
703 * smux.{c,h}: ditto. Fix some signed/unsigned comparisons.
704 * sockopt.c: (getsockopt_cmsg_data) add return for error case.
705 * vty.c: Update with const qualifier.
707 2004-10-08 Hasso Tepper <hasso at quagga.net>
709 * routemap.c, routemap.h: Make some string arguments const.
711 2004-10-05 Paul Jakma <paul@dishone.st>
713 * version.h.in: print_version declaration is here, not in automake
716 2004-10-08 Hasso Tepper <hasso at quagga.net>
718 * command.c, command.h: Make argument of cmd_make_strvec function
720 * command.c: Make hostname commands usable in vtysh again.
722 2004-10-07 Hasso Tepper <hasso at quagga.net>
724 * command.c, pid_output.c, print_version.c, vty.c, vty.h: Make more
727 2004-10-05 Hasso Tepper <hasso at quagga.net>
729 * *.[c|h]: Make many strings cons and a lot of int -> unsigned int
730 changes to fix warnings.
732 2004-10-05 Paul Jakma <paul@dishone.st>
734 * sockopt.{c,h}: add sockopt_iphdrincl_swab_{htosys,systoh},
735 functions to change byte order between system IP_HDRINCL order
737 * thread.c: (funcname_thread_add_timer_timeval) new function, add
738 timer at specified timeval.
739 (funcname_thread_add_timer) use funcname_thread_add_timer_timeval.
740 (funcname_thread_add_timer_msec) ditto
742 2004-10-04 Hasso Tepper <hasso at quagga.net>
744 * memory.c, memory.h: Make char * argument of strdup functions const.
745 * prefix.c, prefix.h: Make many arguments const. Reorder stuff in
747 * log.h: Make log message const in struct message.
748 * log.c: Fix some indenting.
749 * network.c, network.h: Make second argument of writen() const.
751 2004-10-03 Hasso Tepper <hasso at quagga.net>
753 * command.h: Introduce SERVICE_NODE for "service <...>" commands.
754 * command.c: Don't initialize commands that don't make sense if vtysh
756 * vty.c: Make VTY_NODE appear in vtysh.
758 2004-10-03 James R. Leu <jleu at mindspring.com>
760 * zclient.c, zclient.h: zclient functions for router id handling.
761 * zebra.h: New message types for router id handling.
763 2004-09-27 Paul Jakma <paul@dishone.st>
765 * zebra.h: Add WANT_OSPF_WRITE_FRAGMENT for ospfd
766 to try to fragment oversized packets. Enabled only for Linux.
767 Add HAVE_IP_HDRINCL_BSD_ORDER to define struct ip byte order,
768 to consolidate various ad-hoc platform defines for same thing.
770 2004-09-26 Hasso Tepper <hasso at quagga.net>
772 * vty.c, sockopt.c: Fix compiler warnings.
774 2004-09-23 Hasso Tepper <hasso at quagga.net>
776 * linklist.h: Remove list and listnode typedefs.
777 * *.[c|h]: list -> struct list *, listnode -> struct listnode *.
779 2004-09-17 Paul Jakma <paul@dishone.st>
781 * sockopt.c: Add missing bracket
783 2004-09-17 Paul Jakma <paul@dishone.st>
785 * sockopt.{c,h}: Add setsockopt_so_recvbuf, for ripd and ripngd.
787 2004-09-13 Paul Jakma <paul@dishone.st>
789 * command.c: Update the copyright string in the default motd.
791 2004-08-31 David Wiggins <dwiggins@bbn.com>
793 * hash.c (hash_iterate): Save next pointer before calling
794 procedure, so that iteration works even if the called procedure
795 deletes the hash backet.
797 * linklist.h (listtail): new macro, not yet used.
799 2004-08-27 Hasso Tepper <hasso at quagga.net>
801 * command.c: Install "terminal length" commands only if vty is used.
802 Vtysh will handle it itself.
804 2004-08-26 Greg Troxel <gdt@fnord.ir.bbn.com>
806 * sockopt.h: Define method-independent macro for callers of
807 get_ifindex to use for cmsg length.
809 2004-08-19 Paul Jakma <paul@dishone.st>
811 * zebra.h: add MAX and MIN defines (eg for ospf6d)
813 2004-08-19 Paul Jakma <paul@dishone.st>
815 * sockopt.c: include sockopt.h
816 rename some of the _pktinfo_ functions to _ifindex, where that is
818 (getsockopt_ipv6_pktinfo_ifindex) renamed to
819 getsockopt_ipv6_ifindex.
820 (setsockopt_ipv4_pktinfo) renamed to setsockopt_ipv4_ifindex
821 (setsockopt_pktinfo) update with previous and add comment re
823 (setsockopt_ifindex) generic ifindex function ala
825 (getsockopt_ipv4_pktinfo_ifindex) renamed to
826 getsockopt_ipv4_ifindex.
827 (getsockopt_ipv4_ifindex) rejiggling to reduce repeated
828 ifdef/elses. pktinfo case forgot to set ifindex.
829 (getsockopt_pktinfo_ifindex) renamed to
830 getsockopt_ifindex. update some calls to renamed functions.
831 * sockopt.h: Update renamed exported functions
832 Rename the CMSG_SIZE macros to IFINDEX.
833 Guard IPv4 PKTINFO in a conditional define.
835 2004-08-18 Paul Jakma <paul@dishone.st>
837 * vty.c: (vty_serv_un) set unix vty socket to nonblocking
838 to prevent inadvertent blocking of daemons by use of
839 vtysh. TODO: disentangle manual paging from the buffer_write
840 path so that unix vty can use this path too and be reliable.
842 2004-07-23 Greg Troxel <gdt@poblano.ir.bbn.com>
844 * sockopt.c (getsockopt_ipv4_pktinfo_ifindex): Make this compile
845 on NetBSD, and add comments to make it less confusing. Change the
846 sense of the SUNOS_5 test to make parallel structure between the
847 variables and the code.
849 2004-07-23 Paul Jakma <paul@dishone.st>
851 * sockopt.h: Add SOPT_SIZE_CMSG_PKTINFO{_IPV{4,6}} define, for
852 sizeof pktinfo as appropriate, to be used when allocating msg
853 buffers. export setsockopt_pktinfo() and
854 getsockopt_pktinfo_ifindex()
855 * sockopt.c: (setsockopt_pktinfo_ifindex) new function to portably
856 set received ifindex sock option.
857 (getsockopt_pktinfo_ifindex) portably retrieve ifindex.
858 (getsockopt_cmsg_data) retrieve indicated control info from
860 (getsockopt_ipv6_pktinfo_ifindex) ipv6 version of above.
861 (setsockopt_ipv4_pktinfo) v4 version
862 (setsockopt_pktinfo) the exported version
863 (getsockopt_ipv4_pktinfo_ifindex) v4 specific version
864 (getsockopt_pktinfo_ifindex) the exported version
866 2004-07-14 Paul Jakma <paul@dishone.st>
868 * sigevent.c: (quagga_signal_handler) add a global caught flag, set
869 the flags to a constant rather increment to be kinder.
870 (quagga_sigevent_process) new function, to do core of what
871 quagga_signal_timer did. dont block signals at all as sig->caught
872 is volatile sig_atomic_t and should be safe to access from signal
873 and normal contexts. The signal blocking is unneeded paranoia, but
874 is left intact under an ifdef, should some platform require it.
875 Check global caught flag before iterating through array.
876 (quagga_signal_timer) nearly everything moved to
877 quagga_sigevent_process. Left in under ifdef, in case some
878 platform could use a regular timer check for signals.
879 * sigevent.h: quagga_sigevent_process declaration.
880 * thread.c: (thread_fetch) check for signals at beginning of
881 scheduler loop, check for signals if select returns EINTR.
883 2004-07-13 Greg Troxel <gdt@poblano.ir.bbn.com>
885 * sigevent.c: Don't block SIGTRAP and SIGKILL. Blocking SIGTRAP
886 confuses gdb, at least on NetBSD 2.0_BETA, where the block
889 2004-07-09 Paul Jakma <paul@dishone.st>
891 * Merge Kunihiro's 'show route-map' change and add
892 compatibility aliases for route-map continue
893 * jhash.{c,h}: New files. Bob Jenkins' public domain hashing
894 function, as implemented in linux kernel by David Miller.
896 2004-07-09 Juris Kalnins <juris@mt.lv>
898 * if.c: (if_cmp_func) fix for interface names where name is same,
899 but one has no number, eg "devtyp" and "devtyp0".
901 2004-06-30 Greg Troxel <gdt@poblano.ir.bbn.com>
903 * Makefile.am: Make libzebra shared.
905 2004-06-21 Paul Jakma <paul@dishone.st>
907 * ChangeLog: fix my last update config.h -> zebra.h ;)
908 * zebra.h: Fix gcc check.
910 2004-06-11 Sowmini Varadhan <sowmini.varadhan@sun.com>
912 * filter.c: (access_list_remark_cmd) buffer_putstr doesnt need cast
913 to u_char. (ipv6_access_list_remark_cmd) ditto.
915 * network.c: (readn/writen) pointer arg should be type u_char.
916 * plist.c: needs to include stream.h, not declare stream functions
918 (various) Add static qualifier to internal functions.
919 (prefix_list_type_str) extraneous breaks in switch statement.
920 (ip_prefix_list_description_cmd) buffer_putstr doesnt need cast
921 * stream.h: depends on plist.h and export stream_put_prefix
922 * vty.c: (vty_<telnet option build functions>) should use
923 unsigned char, telnet options are 0 -> 255.
924 * zclient.c: various u_char<->char type cleanups.
925 * zebra.h: Having to define CMSG_* can apply to more than just
928 2004-06-09 Paul Jakma <paul@dishone.st>
930 * zebra.h: __attribute__ is a gcc'ism
932 2004-06-04 Paul Jakma <paul@dishone.st>
934 * type mismatch fixes
936 2004-05-18 Hasso Tepper <hasso@estpak.ee>
938 * pqueue.[c|h]: Added as part of ospf6d merge from Zebra repository.
940 2004-05-08 Paul Jakma <paul@dishone.st>
942 * zclient.c (zapi_ipv4_route) Follow Sowmini's lead and describe
945 2004-05-08 Sowmini Varadhan <sowmini.varadhan@sun.com>
947 * zclient.c: (zapi_ipv4_add) collapsed into zapi_ipv4_route
948 (zapi_ipv4_delete) ditto.
949 (zapi_ipv4_route) add/delete a route by way of cmd arg.
950 (zapi_ipv6_add) collapsed into zapi_ipv6_route.
951 (zapi_ipv6_delete) ditto.
952 (zapi_ipv6_route) add/delete a route by way of cmd arg.
953 (zebra_interface_address_delete_read) collapsed into
954 zebra_interface_address_read.
955 (zebra_interface_address_delete_read) ditto.
956 (zebra_interface_address_read) read address add/delete messages
957 by way of type argument. Describe command message format.
958 (zebra_interface_add_read) Unconditionally read new ifmtu6 field.
959 Describe command message format.
960 (zebra_interface_state_read) Unconditionally read new ifmtu6 field.
961 (zclient_redistribute_set) Collapsed into zclient_redistribute
962 (zclient_redistribute_unset) ditto
963 (zclient_redistribute) set/unset redistribution.
964 (zclient_redistribute_default_set) Collapsed into
965 zclient_redistribute_default.
966 (zclient_redistribute_default_unset) ditto.
967 (zclient_redistribute_default) Redistribute default set/unset.
968 * zclient.h: delete zapi_ipv{4,6}_add, zapi_ipv{4,6}_delete. Add
969 zapi_ipv{4,6}_route. delete zclient_redistribute_set/unset. Add
970 zclient_redistribute. Ditto for
971 zclient_redistribute_default_{set/unset}.
973 2004-05-08 Sowmini Varadhan <sowmini.varadhan@sun.com>
975 * if.h: Add mtu6 field to struct interface, IPv6 MTU may differ
976 from IPv4, and Solaris treats the MTU's differently.
977 Add connected_add_by_prefix, for use by later patch.
978 * if.c: (connected_add_by_prefix) Add prefix to connected list.
979 (if_flag_dump) Solaris: Dump IFF_IPv4/6 flag
980 (if_dump) Dump mtu6 flag, for HAVE_IPV6.
981 * command.c: (sockunion_getsockname) use socklen_t for len.
982 (sockunion_getpeername) ditto.
984 2004-04-21 Boris Kovalenko <boris@tagnet.ru>
986 * daemon.c: (daemon) fix check for error return from setsid
988 2004-01-19 Paul Jakma <paul@dishone.st>
990 * sigevent.{c,h}: New files, implement event handled signals.
991 see signal_init() in sigevent.h.
993 2003-12-23 Vincent Jardin <jardin@6wind.com>
995 * {command.c, memory.c, vty.c, zebra.h}: Add isisd support
997 2003-12-22 Greg Troxel <gdt@fnord.ir.bbn.com>
999 * vty.c (vty_use_backup_config): Don't free filenames before using
1002 2003-08-20 Yasuhiro Ohara <yasu@sfc.wide.ad.jp>
1004 * command.c: Fix <cr> display problem for command line
1007 2003-05-24 Anil Madhavapeddy
1009 * (sockunion.c): Incorrect bounds specified in sockunion_log()
1011 2003-05-08 Sergiy Vyshnevetskiy <serg @ vostok.net>
1015 2003-04-19 Hasso Tepper <hasso@estpak.ee>
1017 * rip_routemap.c: sync daemon's route-map commands to have same
1020 2002-09-28 Yasuhiro Ohara <yasu@sfc.wide.ad.jp>
1022 * vty.c (vty_flush): One line more on vty.
1024 2002-09-27 Kunihiro Ishiguro <kunihiro@ipinfusion.com>
1026 * vector.c (vector_lookup): Add new function.
1028 2002-08-19 Kunihiro Ishiguro <kunihiro@ipinfusion.com>
1030 * thread.c (timeval_adjust): Fix unconditional crush due to
1031 FreeBSD's select() system call timeval value check.
1033 2002-07-07 Kunihiro Ishiguro <kunihiro@ipinfusion.com>
1035 * zebra-0.93 released.
1037 2002-06-21 Kunihiro Ishiguro <kunihiro@ipinfusion.com>
1039 * if.c (ifc_pointopoint): Add ifc_pointopoint() accoding to Frank
1040 van Maarseveen's suggestion.
1042 2002-06-18 Kunihiro Ishiguro <kunihiro@zebra.org>
1044 * command.c: Change bcopy() to memcpy().
1046 2001-12-12 Kunihiro Ishiguro <kunihiro@zebra.org>
1048 * command.c (config_password): Fix host.password clear bug.
1049 Reported by Wang Jian <lark@linux.net.cn>.
1051 2001-08-29 Kunihiro Ishiguro <kunihiro@ipinfusion.com>
1053 * thread.c (thread_should_yield): New function to check thread
1054 should yeild it's execution to other thread. Suggested by: Rick
1055 Payne <rickp@ayrnetworks.com>
1057 2001-08-20 Kunihiro Ishiguro <kunihiro@ipinfusion.com>
1059 * thread.c (thread_timer_cmp): Rewrite function.
1061 * hash.c: Add hash_get(). Change hash_pull() to hash_release().
1063 2001-08-19 Kunihiro Ishiguro <kunihiro@ipinfusion.com>
1065 * zebra-0.92a released.
1067 2001-08-15 Kunihiro Ishiguro <kunihiro@ipinfusion.com>
1069 * zebra-0.92 released.
1071 2001-08-12 Akihiro Mizutani <mizutani@dml.com>
1073 * prefix.c (netmask_str2prefix_str): Convert "1.1.0.0 255.255.0.0"
1074 string to "1.1.0.0/16".
1076 2001-08-10 Kunihiro Ishiguro <kunihiro@zebra.org>
1078 * filter.c (access_list_lookup): access_list_lookup's first
1079 argument is changed from address family to AFI.
1081 * plist.c: (prefix_list_lookup): Likewise.
1083 2001-07-27 Akihiro Mizutani <mizutani@dml.com>
1085 * plist.c: ge and le display order is changed. Old compatible
1086 rule (len <= ge-value <= le-value) is removed.
1088 2001-07-08 Kunihiro Ishiguro <kunihiro@zebra.org>
1090 * prefix.h: Temporary fix for alignment of prefix problem.
1092 2001-06-21 Kunihiro Ishiguro <kunihiro@zebra.org>
1094 * prefix.h (struct prefix): Remove safi and padding field.
1095 (struct prefix_ipv4): Likewise.
1096 (struct prefix_ipv6): Likewise.
1097 (struct prefix_ls): Likewise.
1098 (struct prefix_rd): Likewise.
1100 * command.h (enum node_type): Preparation for BGP new config.
1102 * vty.c (vty_end_config): Likewise.
1104 2001-06-17 Kunihiro Ishiguro <kunihiro@zebra.org>
1106 * routemap.c (route_map_rule_delete): Call func_free when
1107 route-map rule is deleted.
1109 2001-06-14 "Akihiro Mizutani" <mizutani@dml.com>
1111 * routemap.c (route_map_index_lookup): Prevent to use deny and
1112 permit for same route-map sequence.
1114 2001-04-12 Kunihiro Ishiguro <kunihiro@zebra.org>
1116 * vty.c (vty_read_config): Fix warning.
1118 2001-03-08 Kunihiro Ishiguro <kunihiro@zebra.org>
1120 * command.c (IPV6_PREFIX_STR): Add '.' and '%' for IPv6 address
1123 2001-03-07 Kunihiro Ishiguro <kunihiro@zebra.org>
1125 * zebra.h (_XPG4_2): Define _XPG4_2 and __EXTENSIONS__ for
1128 2001-03-07 Michael Rozhavsky <mrozhavsky@opticalaccess.com>
1130 * zebra.h (struct in_pktinfo): structure in_pktinfo declaration.
1132 2001-02-19 Kunihiro Ishiguro <kunihiro@zebra.org>
1134 * memory.c (memory_list_lib): Add MTYPE_NEXTHOP for "show memory
1137 2001-02-13 Matthew Grant <grantma@anathoth.gen.nz>
1139 * vty.c (vty_read_config): Revert check of integrate_default when
1142 2001-02-13 Kunihiro Ishiguro <kunihiro@zebra.org>
1144 * vty.c (vty_read_config): Do not check integrate_default. That
1145 should be used only by vtysh.
1147 2001-02-08 Matthew Grant <grantma@anathoth.gen.nz>
1149 * vty.c (vty_serv_un): Set umask 0077.
1150 (vty_read_config): Stat for vtysh Zebra.conf, if found startup and
1151 wait for boot configuration.
1153 * if.c (if_lookup_address): Make it smart implementation.
1155 * sockopt.c (setsockopt_multicast_ipv4): Set up a multicast socket
1156 options for IPv4 This is here so that people only have to do their
1157 OS multicast mess in one place rather than all through zebra,
1160 2001-02-04 Akihiro Mizutani <mizutani@dml.com>
1162 * plist.c (vty_prefix_list_install): Even when argument is
1163 invalid, new memory is allocated. Now memory allocation is done
1164 after argument check.
1166 2001-02-01 Kunihiro Ishiguro <kunihiro@zebra.org>
1168 * zebra-0.91 is released.
1170 2001-01-31 Akihiro Mizutani <mizutani@dml.com>
1172 * vty.c (vty_login): Add vty login command.
1174 2001-01-31 Kunihiro Ishiguro <kunihiro@zebra.org>
1176 * vty.c (vty_reset): Close accept socket.
1178 2001-01-30 Kunihiro Ishiguro <kunihiro@zebra.org>
1180 * memory.h (enum): MTYPE_ATTR_TRANSIT is added for unknown transit
1183 2001-01-22 Kunihiro Ishiguro <kunihiro@zebra.org>
1185 * zclient.c (zebra_interface_address_add_read): Fetch interface
1187 (zebra_interface_address_delete_read): Likewise.
1189 2001-01-16 Kunihiro Ishiguro <kunihiro@zebra.org>
1191 * table.c (route_node_match_ipv4): Utility function for IPv4
1193 (route_node_match_ipv6): Utility function for IPv4 address lookup.
1195 2001-01-15 Kunihiro Ishiguro <kunihiro@zebra.org>
1197 * if.c: Delete RIP_API part until new implementation comes out.
1199 2001-01-13 Kunihiro Ishiguro <kunihiro@zebra.org>
1201 * hash.h (struct Hash): Rename alloc to count. Change type to
1204 * stream.c (stream_getc_from): New function.
1205 (stream_getw_from): Likewise.
1207 * zebra.h (ZEBRA_FLAG_STATIC): Add new flag for persistent route.
1209 2001-01-11 Kunihiro Ishiguro <kunihiro@zebra.org>
1211 * flap.c: File is removed.
1215 * roken.h: Likewise.
1217 * buffer.c (buffer_new): Remove type option to buffer_new().
1219 2001-01-10 Kunihiro Ishiguro <kunihiro@zebra.org>
1221 * zclient.c (zapi_ipv4_delete): Remove OLD_RIB part.
1223 2001-01-09 Kunihiro Ishiguro <kunihiro@zebra.org>
1225 * zebra-0.90 is released.
1227 * command.c: Update Copyright year.
1229 2001-01-09 Matthew Grant <grantma@anathoth.gen.nz>
1231 * if.c (if_create): Register connected_free() function for
1233 (if_delete): Free connected information when the interface is
1235 (if_lookup_by_index): Fix argument type from int to unsigned int.
1236 (connected_add): Keep list in order if old info found, essential
1237 for repeatable operation in some daemons.
1239 2001-01-09 endo@suri.co.jp (Masahiko Endo)
1241 * vty.c (vty_flush): When vty->statis is VTY_CLOSE do not add vty
1244 2001-01-08 Kunihiro Ishiguro <kunihiro@zebra.org>
1246 * filter.c (access_list_delete): Access-list name is not freed.
1248 * plist.c (prefix_list_delete): Prefix-list name is not freed.
1250 2000-12-29 Kunihiro Ishiguro <kunihiro@zebra.org>
1252 * zclient.c (zclient_start): Change to use UNIX domain
1253 socket for zebra communication.
1255 * vector.c (vector_init): vector_alloc and vector_data_alloc is
1256 removed. All memory allocation count should be maintained by
1257 XMALLOC and XFREE macros.
1259 2000-12-28 Kunihiro Ishiguro <kunihiro@zebra.org>
1261 * zebra.h (ZEBRA_NEXTHOP_IFINDEX): Define ZEBRA_NEXTHOP_* values.
1263 2000-12-27 Kunihiro Ishiguro <kunihiro@zebra.org>
1265 * zebra.h (ZEBRA_ERR_RTEXIST): Make zebra error code to negative
1268 2000-12-25 "Wataru Uno" <wataru@po.ntts.co.jp>
1270 * vty.c (vtysh_read): Don't allocate new buffer because buffer is
1271 allocated in vty_new ().
1273 2000-12-14 Kunihiro Ishiguro <kunihiro@zebra.org>
1275 * memory.h (enum): Add MTYPE_AS_FILTER_STR.
1277 * command.c (config_write_terminal): Display "end" at the end of
1280 * plist.c (vty_prefix_list_install): Use AF_INET to determine
1283 2000-12-13 "Wataru Uno" <wataru@po.ntts.co.jp>
1285 * buffer.c (buffer_flush_vty): If IOV_MAX defined in the System,
1286 then all lines write by IOV_MAX.
1288 2000-12-12 Michael Rozhavsky <mrozhavsky@opticalaccess.com>
1290 * command.c (config_write_file): Robust method for writing
1291 configuration file and recover from backing up config file.
1293 2000-11-29 Kunihiro Ishiguro <kunihiro@zebra.org>
1295 * smux.c (smux_connect): More fail check.
1296 (smux_trap): When SMUX connection is not established, do nothing.
1298 2000-11-28 Gleb Natapov <gleb@nbase.co.il>
1300 * thread.c (thread_fetch): Execut event list first. Old event
1301 list is renamed to ready list. With this change, event thread is
1302 executed before any other thread.
1304 * thread.h (struct thread_master): Add ready list.
1306 2000-11-28 Kunihiro Ishiguro <kunihiro@zebra.org>
1308 * linklist.c (listnode_add_after): Add node right after the
1311 2000-11-27 Kunihiro Ishiguro <kunihiro@zebra.org>
1313 * smux.h: Pass struct variable to WriteMethod.
1315 2000-11-25 Frank van Maarseveen <F.vanMaarseveen@inter.NL.net>
1317 * if.c (if_lookup_address): When looking up interface with IP
1318 address, Sometimes multiple interfaces will match. Now PtP
1319 interfaces prevail in such a case which seem the right thing to
1320 do: There will probably also be host routes which usually prevail
1321 over network routes.
1323 2000-11-25 Kunihiro Ishiguro <kunihiro@zebra.org>
1325 * smux.c (smux_trap): SMUX trap implementation.
1327 2000-11-19 Akihiro Mizutani <mizutani@dml.com>
1329 * plist.c: Add automatic conversion function of an old rule.
1330 ex.) 10.0.0.0/8 ge 8 -> 10.0.0.0/8 le 32
1332 2000-11-16 Yon Uriarte <ukl2@rz.uni-karlsruhe.de>
1334 * zclient.c (zebra_interface_add_read): Read hardware address when
1335 hw_addr_len is greater than 0.
1337 2000-11-15 Akihiro Mizutani <mizutani@dml.com>
1339 * plist.c: The rule of "len <= ge-value <= le-value"
1340 was changed to "len < ge-value <= le-value".
1342 2000-11-09 Yasuhiro Ohara <yasu@sfc.wide.ad.jp>
1344 * memory.[ch]: Added #define and functions for ospf6d.
1346 * log.[ch]: some platform says that the data of used va_list
1347 is undefined. Changed to hold list of va_list for each
1350 2000-11-07 Rick Payne <rickp@rossfell.co.uk>
1352 * memory.h (enum): Add MTYPE_COMMUNITY_REGEXP.
1354 2000-11-06 Kunihiro Ishiguro <kunihiro@zebra.org>
1356 * command.c (config_exit): Fix bug of missing break after case
1359 2000-10-30 Kunihiro Ishiguro <kunihiro@zebra.org>
1361 * vector.c (vector_unset): Check i is not nevative.
1363 2000-10-24 Arkadiusz Miskiewicz <misiek@pld.org.pl>
1365 * smux.c (smux_sock): Set terminating '\0'. Check address family.
1367 * vty.c (vty_serv_sock_addrinfo): Set terminating '\0'. Use
1368 gai_strerror. Check address family.
1370 2000-10-23 Jochen Friedrich <jochen@scram.de>
1372 * smux.c: Use linklist rather than vector.
1373 (smux_getnext): A SMUX subagent has to behave as if it manages the
1374 whole SNMP MIB tree itself. It's the duty of the master agent to
1375 collect the best answer and return it to the manager. See RFC 1227
1376 chapter 3.1.6 for the glory details :-). ucd-snmp really behaves
1377 bad here as it actually might ask multiple times for the same
1378 GETNEXT request as it throws away the answer when it expects it in
1379 a different subtree and might come back later with the very same
1382 2000-10-23 Kunihiro Ishiguro <kunihiro@zebra.org>
1384 * command.c (cmd_init): Log related command are only installed for
1387 2000-10-21 Kunihiro Ishiguro <kunihiro@zebra.org>
1389 * Makefile.am (libzebra_a_SOURCES): Remove duplicated buffer.c.
1391 * zebra.h: Remove #warn directive.
1393 2000-10-20 Kunihiro Ishiguro <kunihiro@zebra.org>
1395 * keychain.c (keychain_init): Register "key chain" command to
1396 KEYCHAIN_NODE and KEYCHAIN_KEY_NODE.
1398 * vty.c (vty_end_config): Fix missing vty_cinfig_unlock for other
1401 * command.c (config_end): Likewise.
1403 * keychain.c (keychain_get): Key is sorted by it's identifier
1406 2000-10-19 Kunihiro Ishiguro <kunihiro@zebra.org>
1408 * linklist.c (list_delete_all_node): Call delete function if it is
1411 * command.c (cmd_execute_command_strict): Add modification for
1413 (cmd_execute_command_strict): Remove first argument cmdvec because
1414 it is global varibale in command.c.
1416 2000-10-18 Kunihiro Ishiguro <kunihiro@zebra.org>
1418 * command.c (cmd_init): Install
1419 copy_runningconfig_startupconfig_cmd only in terminal mode.
1421 * linklist.c (list_delete_node): Simplify the function.
1422 (listnode_lookup): Renamed from list_lookup_node.
1424 2000-10-17 Kunihiro Ishiguro <kunihiro@zebra.org>
1426 * stream.h: Undef stream_read and stream_write without
1429 * newlist.c: File removed.
1431 * newlist.h: Likewise.
1433 * linklist.c (list_new): Remove list_init(). To allocate new
1434 linked list, please use list_new().
1435 (listnode_add): Remove list_add_node(). To add new node to linked
1436 list, please use listnode_add().
1437 (list_delete_by_val): Revemove fucntion.
1439 2000-10-16 Nobuaki Tanaka <nobby@po.ntts.co.jp>
1441 * table.c (route_table_free): Reimplement route_table_free().
1443 2000-10-11 Kunihiro Ishiguro <kunihiro@zebra.org>
1445 * keychain.c (keychain_get): Register key_delete_func to key
1446 list's delete function. Use linklist.c instead of newlist.c.
1448 2000-10-04 Akihiro Mizutani <mizutani@dml.com>
1450 * filter.c (access_list_remark): Add access-list's remark command.
1451 (no_access_list): "no access-list 100 permit any" error message
1454 2000-10-03 Kunihiro Ishiguro <kunihiro@zebra.org>
1456 * memory.h (enum): Add MTYPE_SOCKUNION.
1458 2000-10-02 Kunihiro Ishiguro <kunihiro@zebra.org>
1460 * zebra-0.89 is released.
1462 2000-10-01 Kunihiro Ishiguro <kunihiro@zebra.org>
1464 * linklist.c (list_add_node_head): Delete unused function.
1465 (list_add_node_tail): Likewise.
1467 2000-09-26 Kunihiro Ishiguro <kunihiro@zebra.org>
1469 * stream.c (stream_read_unblock): Add new function for unblocking
1472 2000-09-26 Jochen Friedrich <jochen@nwe.de>
1474 * smux.c (smux_register): Fix bug of can't register more than one
1477 2000-09-26 Makoto Otsuka <otsuka@inl.ntts.co.jp>
1479 * vty.c (vty_close): Fix memory leak of sb_buffer.
1480 (vty_new): Likewise.
1482 2000-09-21 steve@Watt.COM (Steve Watt)
1484 * log.h: Do not declare zlog_priority[0] variable.
1486 2000-09-12 Kunihiro Ishiguro <kunihiro@zebra.org>
1488 * linklist.h (struct _list ): Add member cmp for compare function.
1489 (struct _list ): Member up is deleted
1491 2000-09-12 David Lipovkov <dlipovkov@OpticalAccess.com>
1493 * if.c: Include RIP_API header when RIP API is enabled.
1495 2000-09-10 Kunihiro Ishiguro <kunihiro@zebra.org>
1497 * prefix.c (prefix_free): Siplify prefix_free().
1499 * keychain.c (key_match_for_accept): strncmp check bug is fixed.
1501 2000-09-07 Kunihiro Ishiguro <kunihiro@zebra.org>
1503 * zebra.h: Merge roken.h into zebra.h.
1505 2000-09-05 Akihiro Mizutani <mizutani@dml.com>
1507 * routemap.c (route_map_init_vty): Install route-map command to
1510 2000-08-22 Kunihiro Ishiguro <kunihiro@zebra.org>
1512 * thread.c (thread_get_id): Remove pthread related garbage.
1514 * command.h (struct host): Likewise.
1516 * zebra.h: Likewise.
1518 2000-08-20 Kunihiro Ishiguro <kunihiro@zebra.org>
1520 * command.h (node_type ): Add AAA node for authentication.
1522 * vty.c (vty_close): Do not close stdout.
1524 2000-08-18 Kunihiro Ishiguro <kunihiro@zebra.org>
1526 * vty.c (vty_init_vtysh): Added for vtysh.
1528 * distribute.c (districute_list_prefix_all): Interface independent
1530 (distribute_list_all): Likewise.
1531 (config_show_distribute): Display current distribute-list status
1532 for "show ip protocols".
1534 2000-08-18 Akihiro Mizutani <mizutani@dml.com>
1536 * command.c (config_terminal_no_length): no terminal monitor ->
1538 (cmd_init): Do not install service_terminal_length_cmd into
1541 * vty.c (terminal_no_monitor): no terminal length -> terminal no
1544 2000-08-17 Kunihiro Ishiguro <kunihiro@zebra.org>
1546 * zebra-0.88 is released.
1548 2000-08-17 Magnus Ahltorp <ahltorp@nada.kth.se>
1550 * vty.h (struct vty ): Add iac_sb_in_progress and sb_buffer for
1551 better IAC handling.
1553 * vty.c (vty_telnet_option): Change telnet option handling.
1555 2000-08-15 Gleb Natapov <gleb@nbase.co.il>
1557 * zclient.c (zclient_redistribute_unset): New function added.
1559 2000-08-14 Kunihiro Ishiguro <kunihiro@zebra.org>
1561 * zclient.c (zebra_interface_add_read): Change ifindex restore
1562 size from two octet to four.
1563 (zebra_interface_state_read): Likewise.
1564 (zebra_interface_address_add_read): Likewise.
1566 2000-08-13 Kunihiro Ishiguro <kunihiro@zebra.org>
1568 * vty.c (vty_event): Use vector_set_index() instead of
1571 2000-08-07 Kunihiro Ishiguro <kunihiro@zebra.org>
1573 * zebra.h (ZEBRA_XXX_DISTANCE_DEFAULT): Define Default
1574 Administrative Distance of each protocol.
1576 2000-08-07 Matthew Grant <grantma@anathoth.gen.nz>
1578 * if.h (struct interface ): Add new member bandwidth to struct
1581 * zclient.c (zebra_interface_add_read): Fetch bandwidth value.
1582 (zebra_interface_state_read): Likewise.
1584 2000-08-07 Gleb Natapov <gleb@nbase.co.il>
1586 * routemap.c (route_map_event_hook): New hook route_map_event_hook
1587 is added. This hook is called when route-map is changed. The
1588 parameters passed to the hook are 'event' and 'route-map name'
1590 * routemap.h: Add prototype for route_map_event_hook().
1592 2000-08-06 Kunihiro Ishiguro <kunihiro@zebra.org>
1594 * zclient.c (zebra_ipv4_route): zebra_ipv4_route(),
1595 zebra_ipv4_add(), zebra_ipv4_delete() are removed.
1597 * routemap.c (route_map_empty): Add new function.
1598 (route_map_delete): Use route_map_index_delete() instead of
1599 route_map_index_free().
1600 (route_map_index_free): Function removed.
1602 2000-08-06 Gleb Natapov <gleb@nbase.co.il>
1604 * routemap.c (route_map_index_delete): Add check for route-map is
1607 2000-08-03 Kunihiro Ishiguro <kunihiro@zebra.org>
1609 * zclient.c (zebra_ipv4_add): Change socket arguemnt with struct
1612 2000-08-02 Kunihiro Ishiguro <kunihiro@zebra.org>
1614 * zclient.h (struct zebra): Add obuf for output buffer.
1616 * if.c: Remove #ifdef NRL enclosing if_nametoindex() and
1619 2000-08-02 David Lipovkov <davidl@nbase.co.il>
1621 * if.h (IF_PSEUDO_UNSET): IF_PSEUDO related macro added.
1622 (IF_UNKNOWN_SET): IF_UNKNOWN related macro deleted.
1624 * if.c (interface_pseudo): Add "pseudo" command to interface node.
1625 (no_interface_pseudo): Add "no pseudo" command to interface node.
1627 * zclient.c (zebra_interface_add_read): Set pseudo flag when it is
1630 2000-08-01 Kunihiro Ishiguro <kunihiro@zebra.org>
1632 * zebra.h (ZEBRA_IPV4_NEXTHOP_LOOKUP): Add new message.
1633 (ZEBRA_IPV6_NEXTHOP_LOOKUP): Likewise.
1635 * vty.c (vty_serv_un): Use AF_UNIX for backward compatibility.
1637 2000-07-31 Kunihiro Ishiguro <kunihiro@zebra.org>
1639 * vty.c: Use vector for VTY server thread listing instead of
1642 2000-07-30 Kunihiro Ishiguro <kunihiro@zebra.org>
1644 * keychain.c (no_key_chain): "no key chain WORD" command is added.
1646 2000-07-29 Kunihiro Ishiguro <kunihiro@zebra.org>
1648 * command.c (config_from_file): If command fail in
1649 KEYCHAIN_KEY_NODE, down to KEYCHAIN_NODE.
1651 * vty.h (struct vty ): Add index_sub member.
1653 2000-07-27 Akihiro Mizutani <mizutani@dml.com>
1655 * if.c: Help strings updates.
1657 2000-07-11 Akihiro Mizutani <mizutani@dml.com>
1659 * command.c (no_config_enable_password): Add "no enable password"
1661 (config_write_host): Display password string.
1663 * routemap.c (route_map_delete_match): Add support for delete
1664 match without argument.
1665 (route_map_delete_set): Likewise.
1667 2000-07-09 Kunihiro Ishiguro <kunihiro@zebra.org>
1669 * command.h (node_type ): Change KEYCHAIN_NODE and
1670 KEYCHAIN_KEY_NODE place just before INTERFACE_NODE.
1672 2000-07-09 Jochen Friedrich <jochen@scram.de>
1674 * smux.c (config_write_smux): Fixes the option to override OID and
1677 2000-07-09 Kunihiro Ishiguro <kunihiro@zebra.org>
1679 * command.h (node_type ): Add SMUX_NODE for SMUX configuration.
1681 2000-07-09 Toshiaki Takada <takada@zebra.org>
1683 * command.c: Sort descvec command's help.
1685 * vty.c (vty_describe_command): Display '<cr>' at the end of
1688 2000-07-05 Toshiaki Takada <takada@zebra.org>
1690 * command.c (cmd_ipv6_match), (cmd_ipv6_prefix_match): Fix bug
1691 treatment of double colon.
1693 2000-07-04 Kunihiro Ishiguro <kunihiro@zebra.org>
1695 * zclient.h: Add zclient_redistribute_default_{set,unset}().
1697 * keychain.c: New file for authentication key management.
1698 * keychain.h: Likewise.
1700 * tcpfilter.c: New file for TCP/UDP base filtering using ipfw or
1702 * tcpfilter.h: Likewise.
1704 * flap.h: New file for route flap dampening.
1707 2000-07-04 Toshiaki Takada <takada@zebra.org>
1709 * filter.c (struct filter): Add exact flag.
1710 (access_list): Add exact-match command.
1711 (ipv6_access_list): Add exact-match command.
1713 2000-07-03 Kunihiro Ishiguro <kunihiro@zebra.org>
1715 * zebra.h (ZEBRA_REDISTRIBUTE_DEFAULT_ADD): New message for
1716 request default route.
1718 2000-07-01 Hideaki YOSHIFUJI (
\e$B5HF#1QL@
\e(B) <yoshfuji@ecei.tohoku.ac.jp>
1720 * smux.c: Add IPv6 smux connection code.
1722 2000-06-15 Kunihiro Ishiguro <kunihiro@zebra.org>
1724 * vty.c (vty_complete_command): To cooperate readline library,
1725 returned string is newly allocated. So some match function case
1726 need, free of memory.
1728 2000-06-12 Akihiro Mizutani <mizutani@dml.com>
1730 * distribute.c: Fix help strings.
1732 2000-06-11 Kunihiro Ishiguro <kunihiro@zebra.org>
1734 * command.c (cmd_complete_command): Add check for vector_slot
1735 (vline, index) is not NULL when calculating lcd.
1736 (cmd_entry_function): First check variable arguemnt to prevent it
1739 2000-06-10 Kunihiro Ishiguro <kunihiro@zebra.org>
1741 * vty.h (struct vty ): Add output_count member for displaying
1742 output route count. Remove arugment arg from output_func because
1743 the value is passed by vty argument. Change output to output_rn.
1744 Add output_clean function pointer member. Add output_type member.
1746 2000-06-10 Toshiaki Takada <takada@zebra.org>
1748 * command.c (show_startup_config): Add "show startup-config"
1751 2000-06-06 Akihiro Mizutani <mizutani@dml.com>
1753 * filter.c: Fix help strings.
1755 2000-06-05 Kunihiro Ishiguro <kunihiro@zebra.org>
1757 * prefix.h (struct prefix_rd): New prefix structure for routing
1759 (struct prefix): Add padding to every prefix structure.
1762 * routemap.c (route_map_add_match): When completely same match
1763 statement exists, don't duplicate it.
1765 2000-06-05 Akihiro Mizutani <mizutani@dml.com>
1767 * routemap.c: Change NAME to WORD.
1769 * plist.c: Fix help strings.
1771 2000-06-02 Akihiro Mizutani <mizutani@dml.com>
1773 * routemap.c: Fix route-map help strings.
1775 2000-06-01 Kunihiro Ishiguro <kunihiro@zebra.org>
1777 * command.c (cmd_filter_by_completion): Fix CMD_VARARG treatment
1778 to filter other non vararg commands.
1780 * routemap.c (route_map_init_vty): Use install_default() for
1781 install common commands into route-map node..
1783 2000-06-01 Akihiro Mizutani <mizutani@dml.com>
1785 * command.h (OSPF_STR): Macro added.
1787 2000-05-31 Kunihiro Ishiguro <kunihiro@zebra.org>
1789 * command.c (cmd_complete_command): LCD completion must not modify
1790 installed command string.
1792 * plist.c (ipv6_prefix_list): Fix wrong syntax definition. Change
1793 X:X::X:X to X:X::X:X/M.
1795 2000-05-31 Toshiaki Takada <takada@zebra.org>
1797 * vty.c (show_history): New defun added.
1799 2000-05-30 Kunihiro Ishiguro <kunihiro@zebra.org>
1801 * command.h (CMD_COMPLETE_LIST_MATCH): New define for completion
1802 list. CMD_COMPLETE_MATCH is used for LCD completion.
1804 * vty.c (vty_complete_command): Matched string's LCD is completed.
1806 * command.c (cmd_lcd): New function for calculate LCD of matched
1809 2000-05-26 Kunihiro Ishiguro <kunihiro@zebra.org>
1811 * command.c (install_default): config_write_terminal_cmd,
1812 config_write_file_cmd, config_write_memory_cmd are added to
1815 * memory.c (memory_init): Divide show memory command into each
1818 * command.c (cmd_init): config_write_terminal_cmd,
1819 config_write_file_cmd, config_write_memory_cmd are added to
1822 * routemap.c (route_map_index_free): New function.
1823 (no_route_map_all): New DEFUN for "no route-map NAME".
1825 * filter.c (no_access_list_all): New DEFUN for delete access-list
1827 (no_ipv6_access_list_all): Likewise.
1829 2000-05-23 Kunihiro Ishiguro <kunihiro@zebra.org>
1831 * plist.c: Change IPV6_PREFIX to X:X::X:X. When "any" is
1832 specified, user can not use "ge" and "le" statement.
1834 2000-05-22 Thomas Molkenbur <tmo@datus.datus.com>
1836 * routemap.c (route_map_add_set): Fix bug of next pointer missing.
1838 * table.c (route_table_free): Like wise.
1840 2000-05-22 Toshiaki Takada <takada@zebra.org>
1842 * vty.c (vty_stop_input): Set history pointer to the latest one.
1844 * vty.c (vty_hist_add): Do not add command line history when input
1845 is as same as previous one.
1847 2000-05-14 Kunihiro Ishiguro <kunihiro@zebra.org>
1849 * memory.h (enum): Add MTYPE_ECOMMUNITY and MTYPE_ECOMMUNITY_VAL.
1851 2000-05-13 Kunihiro Ishiguro <kunihiro@zebra.org>
1853 * command.h (node_type ): Add BGP_VPNV4_NODE.
1855 2000-05-08 Kunihiro Ishiguro <kunihiro@zebra.org>
1857 * vty.c (vtysh_accept): Add cast of struct sockaddr * to bind
1858 argument. Reported by: Vesselin Mladenov <mladenov@netbg.com>.
1860 * filter.c (ipv6_access_list): Add IPv6 prefix example instead of
1861 IPv4 example. Reported by: Love <lha@s3.kth.se>.
1863 * command.c (cmd_complete_command): Make it sure last element of
1864 matchvec is NULL. This fix problem which cause crush in
1865 vty_complete_command(). Reported by: JINMEI Tatuya
1866 <jinmei@isl.rdc.toshiba.co.jp>.
1868 2000-04-28 Love <lha@s3.kth.se>
1870 * prefix.h (struct prefix): Add padding.
1872 2000-04-28 Kunihiro Ishiguro <kunihiro@zebra.org>
1874 * command.c (show_version): Update copyright year.
1876 2000-04-27 Kunihiro Ishiguro <kunihiro@zebra.org>
1878 * routemap.c (route_map_apply): When map is NULL, return deny.
1880 2000-04-26 Kunihiro Ishiguro <kunihiro@zebra.org>
1882 * filter.c (access_list_apply): When access is NULL, return deny.
1884 * plist.c (prefix_list_apply): When plist is NULL, return deny.
1886 2000-04-23 Kunihiro Ishiguro <kunihiro@zebra.org>
1888 * command.h (node_type ): Change RDISC_NODE to IRDP_NODE.
1890 2000-04-18 Toshiaki Takada <takada@zebra.org>
1892 * filter.[ch] (access_list_add_hook), (access_list_delete_hook):
1893 Add argument for hook function to give struct access_list *.
1895 2000-04-17 Kunihiro Ishiguro <kunihiro@zebra.org>
1897 * plist.c (prefix_list_entry_match): In case of le nor ge is
1898 specified, exact match is performed.
1899 (prefix_list_entry_match): Add any entry matching check.
1901 2000-04-09 Kunihiro Ishiguro <kunihiro@zebra.org>
1903 * vty.c (exec_timeout): Separate timeout setting to minutes and
1905 (no_exec_timeout): Add "no exec-timeout" command.
1907 * vty.h (VTY_TIMEOUT_DEFAULT): Change default value from 300 to
1910 2000-03-31 Jochen Friedrich <jochen@scram.de>
1912 * smux.h (SMUX_CLOSE): The SMUX_CLOSE PDU is implicit integer, so
1913 it is a primitive encoding and not constructed.
1915 2000-03-28 Toshiaki Takada <takada@zebra.org>
1917 * memory.[ch] (enum): Add MTYPE_OSPF_EXTERNAL_INFO.
1919 2000-03-26 Love <lha@s3.kth.se>
1921 * zclient.c (zclient_read): Add nbytes size check for
1922 ZEBRA_HEADER_SIZE. Check return value of steam_read ().
1924 2000-03-26 Rick Payne <rickp@rossfell.co.uk>
1926 * routemap.c: Add flexible route-map commands such as on-match
1927 next, on-match goto N.
1929 * routemap.h: Likewise
1931 2000-03-23 Adrian Bool <aid@u.net.uk>
1933 * command.c (config_log_trap): Add new command "log trap
1936 2000-03-14 Toshiaki Takada <takada@zebra.org>
1938 * memory.c (struct memory_list): Add Link List and Link Node
1941 * memory.h (enum): Remove MTYPE_OSPF_EXTERNAL_ROUTE.
1943 2000-01-20 Hideto Yamakawa <hideto.yamakawa@soliton.co.jp>
1945 * str.c (snprintf): Fix bug of calling sprintf instead of
1948 2000-01-16 Kunihiro Ishiguro <kunihiro@zebra.org>
1950 * memory.h (enum): Add MTYPE_RIP_PEER.
1952 2000-01-15 Toshiaki Takada <takada@zebra.org>
1954 * memory.h (enum): Add MTYPE_OSPF_CRYPT_KEY.
1956 2000-01-15 Kunihiro Ishiguro <kunihiro@zebra.org>
1958 * command.h (node_type ): Add MASC_NODE for masc.
1960 2000-01-09 Wang Jianliang <wangjl@soim.net>
1962 * routemap.c (route_map_index_add): When route_map_index is not
1963 empty and insert new item at the head, it can cause core dump.
1964 Fix "if (index == map->head)" to "if (point == map->head).
1965 (route_map_add_set): If there is an old set command, override old
1966 set command with new one.
1967 (route_map_index_delete): Use while() instead of for for() for
1968 logical correctness.
1970 1999-12-26 Kunihiro Ishiguro <kunihiro@zebra.org>
1972 * memory.h (enum): Add MTYPE_BGP_STATIC.
1974 1999-12-23 Alex Zinin <zinin@amt.ru>
1975 * zebra.h, zclient.*: dynamic int up/down message
1978 1999-12-10 Kunihiro Ishiguro <kunihiro@zebra.org>
1980 * thread.c (thread_cancel_event): Add a function for clean up
1983 1999-12-09 Kunihiro Ishiguro <kunihiro@zebra.org>
1985 * dropline.c: Delete file.
1986 dropline.h: Linewise.
1988 1999-12-14 Kunihiro Ishiguro <kunihiro@zebra.org>
1990 * filter.c (access_list_filter_delete): Wrong pointer
1991 access->master was pointed out after access is freed. I store
1992 master value at the beginning of the function.
1994 1999-12-08 Kunihiro Ishiguro <kunihiro@zebra.org>
1996 * vty.c (exec_timeout): Change of VTY timeout affect to current
1998 (vty_accept): Instead of immediate exit() return -1.
2000 1999-12-07 Kunihiro Ishiguro <kunihiro@zebra.org>
2002 * vty.c (vty_configure_lock): Configuration lock function added.
2003 Only one VTY can use CONFI_NODE at the same time.
2005 * log.c: Delete zvlog_* functions. Now zlog_* does the same
2008 * log.c (log_init): Function removed.
2009 (log_close): Likewise.
2010 (log_flush): Likewise.
2011 (log_open): Likewise.
2013 * vty.c (terminal_monitor): Add new command.
2014 (no_terminal_monitor): Likewise.
2016 * log.c (old_log): Function removed.
2017 (old_log2): Likewise.
2018 (old_log_warn): Likewise.
2020 1999-12-04 Toshiaki Takada <takada@zebra.org>
2022 * command.c (cmd_ipv6_match): New function added.
2023 (cmd_ipv6_prefix_match): Likewise.
2025 1999-12-04 Kunihiro Ishiguro <kunihiro@zebra.org>
2027 * command.c (cmd_ipv6_match):
2029 * table.c: Delete #ifdef HAVE_MBGPV4.
2031 * prefix.h (struct prefix): Add safi member.
2032 (struct prefix_ipv4): Likewise.
2033 (struct prefix_ipv6): Likewise.
2035 1999-12-04 Rumen Svobodnikov <rumen@linux.tu-varna.acad.bg>
2037 * memory.c (struct mstat): Revert to support MEMORY_LOG.
2039 1999-11-25 Kunihiro Ishiguro <kunihiro@zebra.org>
2041 * version.h: Bump up to 0.81c for testing new kernel codes.
2043 1999-11-21 Kunihiro Ishiguro <kunihiro@zebra.org>
2045 * thread.h (struct thread): Pthread support is disabled all
2048 1999-11-21 Michael Handler <handler@sub-rosa.com>
2050 * Include <limits.h> and <strings.h> under SUNOS_5.
2052 1999-11-21 Kunihiro Ishiguro <kunihiro@zebra.org>
2054 * sockunion.c (in6addr_cmp): Enclosed by #define HAVE_IPV6
2055 1999-11-13 Kunihiro Ishiguro <kunihiro@zebra.org>
2057 * command.h (node_type ): Add BGP_IPV4_NODE and BGP_IPV6_NODE.
2059 1999-11-12 Kunihiro Ishiguro <kunihiro@zebra.org>
2061 * command.c (disable): Add `disable' command.
2063 1999-11-09 Kunihiro Ishiguro <kunihiro@zebra.org>
2065 * plist.c (vty_prefix_list_install): Add any check.
2067 1999-11-04 Kunihiro Ishiguro <kunihiro@zebra.org>
2069 * command.h (node_type ): Add DUMP_NODE.
2071 1999-11-03 Kunihiro Ishiguro <kunihiro@zebra.org>
2073 * smux.c: Change default SMUX oid to compatible with gated.
2075 1999-10-30 Kunihiro Ishiguro <kunihiro@zebra.org>
2077 * if_rmap.c: New file added.
2079 * if_rmap.h: New file added.
2081 1999-10-29 Alex Zinin <zinin@amt.ru>
2083 * hash.c: add hash_free() function
2085 1999-10-25 Kunihiro Ishiguro <kunihiro@zebra.org>
2087 * hash.c (hash_clean): Add clean function.
2089 * plist.c (prefix_list_reset): Add reset function.
2091 * filter.c (access_list_reset): Add reset function.
2093 1999-10-17 Kunihiro Ishiguro <kunihiro@zebra.org>
2095 * client.c: Merged with zclient.c.
2096 * client.h: Merged with zclient.h.
2098 1999-10-15 Jordan Mendelson <jordy@wserv.com>
2100 * md5.c: Imported from GNU C Library.
2101 * md5-gnu.h: Likewise.
2103 1999-10-15 Jochen Friedrich <jochen@scram.de>
2105 * smux.c (smux_getresp_send): SMUX_GETRSP codes improvement.
2107 1999-10-06 Kunihiro Ishiguro <kunihiro@zebra.org>
2109 * smux.h: New file added.
2111 * snmp.c: Rename to smux.c.
2113 1999-10-02 Kunihiro Ishiguro <kunihiro@zebra.org>
2115 * command.c (cmd_execute_command_strict): Filter ambious commands.
2116 (cmd_filter_by_string): Change to return enum match_type.
2118 1999-10-01 Toshiaki Takada <takada@zebra.org>
2120 * vty.c (vty_describe_fold): New function which does VTY
2121 description line fold.
2122 * vty.c (vty_describe_command): Set description column.
2124 1999-09-30 Kunihiro Ishiguro <kunihiro@zebra.org>
2126 * plist.c (prefix_list_init_ipv4): VTY user interface is improved.
2128 1999-09-26 Kunihiro Ishiguro <kunihiro@zebra.org>
2130 * command.c (cmd_filter_by_string): Fix bug of CMD_IPV4 and
2131 CMD_IPV4_PREFIX check. Both return type must be exact_match.
2133 1999-09-24 Toshiaki Takada <takada@zebra.org>
2135 * command.c (cmd_filter_by_completion),
2136 (is_cmd_ambiguous): Check IPv4 address, IPv4 prefix and range
2137 parameter matches range.
2139 1999-09-22 Kunihiro Ishiguro <kunihiro@zebra.org>
2141 * routemap.c (route_map_apply): Returm RM_DENYMATCH when no match
2144 1999-09-21 Kunihiro Ishiguro <kunihiro@zebra.org>
2146 * vty.c (vty_read): Control-C stop VTY_MORE mode.
2148 1999-09-20 Kunihiro Ishiguro <kunihiro@zebra.org>
2150 * command.h (node_type ): Add ACCESS_IPV6_NODE and
2153 * distribute.h: New file added.
2155 * command.h (node_type ): Delete DISTRIBUTE_NODE.
2157 1999-09-18 Kunihiro Ishiguro <kunihiro@zebra.org>
2159 * vty.c (vty_terminate_all): New function added for reload
2162 1999-09-06 Kunihiro Ishiguro <kunihiro@zebra.org>
2164 * memory.h (enum): Add new type MTYPE_OSPF_EXTERNAL_ROUTE.
2166 1999-08-31 Janos Farkas <chexum@shadow.banki.hu>
2168 * vty.c (vty_read): Handle also 0x7f (alt-backspace), just like
2169 esc-ctrl-h (delete word backwards).
2171 1999-08-24 Kunihiro Ishiguro <kunihiro@zebra.org>
2173 * if.h: Add if_nametoindex for NRL.
2175 1999-08-23 Kunihiro Ishiguro <kunihiro@zebra.org>
2177 * if.c (if_create): New function.
2179 1999-08-22 Kunihiro Ishiguro <kunihiro@zebra.org>
2183 1999-08-21 Kunihiro Ishiguro <kunihiro@zebra.org>
2185 * stream.c (stream_put): stream_memcpy () is changed to stream_put
2186 (). stream_get () is added.
2188 1999-08-18 Toshiaki Takada <takada@zebra.org>
2190 * memory.h (enum): Add MTYPE_OSPF_LSA_DATA.
2192 1999-08-18 Yasuhiro Ohara <yasu@sfc.wide.ad.jp>
2194 * table.c (route_table_finish): add function frees table.
2196 1999-08-12 Kunihiro Ishiguro <kunihiro@zebra.org>
2198 * memory.h (enum): Add MTYPE_RTADV_PREFIX.
2200 1999-08-11 Kunihiro Ishiguro <kunihiro@zebra.org>
2202 * if.h (struct interface ): hw_address, hw_address_len added.
2204 1999-08-10 Kunihiro Ishiguro <kunihiro@zebra.org>
2206 * if.h (struct interface ): Change structure member if_data to
2207 info, index to ifindex.
2209 1999-08-08 Rick Payne <rickp@rossfell.co.uk>
2211 * routemap.c: Multi protocol route-map modification.
2213 * routemap.c (route_map_apply): Route match process bug is fixed.
2215 1999-08-05 Kunihiro Ishiguro <kunihiro@zebra.org>
2217 * thread.c (thread_fetch): When signal comes, goto retry point.
2219 1999-08-04 Kunihiro Ishiguro <kunihiro@zebra.org>
2221 * Makefile.am: Add sockopt.c and sockopt.h
2222 * sockopt.c: New file.
2223 * sockopt.h: New file.
2225 1999-08-02 Kunihiro Ishiguro <kunihiro@zebra.org>
2227 * version.h (ZEBRA_VERSION): Release zebra-0.75
2229 1999-08-01 Kunihiro Ishiguro <kunihiro@zebra.org>
2231 * memory.h (enum): Add MTYPE_RIPNG_AGGREGATE.
2233 1999-07-31 Kunihiro Ishiguro <kunihiro@zebra.org>
2235 * sockunion.h: Add sockunion_getpeername ().
2237 1999-07-27 Kunihiro Ishiguro <kunihiro@zebra.org>
2239 * version.h: Release zebra-0.74
2241 1999-07-26 Kunihiro Ishiguro <kunihiro@zebra.org>
2243 * command.h (struct host): Delete lines from struct host. Add
2244 lines to struct vty.
2246 * command.c: Delete `lines LINES'. Terminal display line settings
2247 should be done by `terminal length' command.
2249 1999-07-24 Kunihiro Ishiguro <kunihiro@zebra.org>
2251 * memory.h (enum): MTYPE_OSPF_PATH are added.
2253 1999-07-22 Toshiaki Takada <takada@zebra.org>
2255 * memory.h (enum): MTYPE_OSPF_NEXTHOP is added.
2257 1999-07-21 Toshiaki Takada <takada@zebra.org>
2259 * linklist.c (list_add_node_prev), (list_add_node_next),
2260 (list_add_list): New function added.
2262 * table.c (route_table_free): New function added.
2264 1999-07-21 Kunihiro Ishiguro <kunihiro@zebra.org>
2266 * plist.c (config_write_prefix): Set write flag when configuration
2269 1999-07-15 Yasuhiro Ohara <yasu@sfc.wide.ad.jp>
2271 * prefix.c : prefix_cmp() added. change apply_mask() to
2272 apply_mask_ipv4(), and new apply_mask() added.
2274 1999-07-14 Yasuhiro Ohara <yasu@sfc.wide.ad.jp>
2276 * prefix.c (prefix2str): append prefixlen.
2278 1999-07-13 Kunihiro Ishiguro <kunihiro@zebra.org>
2280 * command.c (config_terminal): Change "config terminal" to
2281 "configure terminal". Reported by Georg Hitsch
2283 (config_terminal_length): `terminal length <0-512>' is added. At
2284 this moment this command is only usef for vty interface.
2285 Suggested by Georg Hitsch <georg@atnet.at>.
2287 1999-07-12 Kunihiro Ishiguro <kunihiro@zebra.org>
2289 * routemap.c (rulecmp): Add wrapper function of strcmp.
2291 1999-07-08 Rick Payne <rickp@rossfell.co.uk>
2293 * sockunion.c (inet_aton): Fix bug of inet_aton.
2295 1999-07-08 Kunihiro Ishiguro <kunihiro@zebra.org>
2297 * version.h (ZEBRA_VERSION): Start zebra-0.73
2299 1999-07-06 Kunihiro Ishiguro <kunihiro@zebra.org>
2301 * version.h: Bump up to 0.72.
2303 1999-07-05 Kunihiro Ishiguro <kunihiro@zebra.org>
2305 * command.c (install_default): New function for install default
2306 commands to the node.
2308 * memory.h (enum): MTYPE_NEXTHOP is added.
2310 1999-07-01 <kunihiro@zebra.org>
2312 * command.c (no_banner_motd): `no banner motd' command added.
2314 1999-06-30 Kunihiro Ishiguro <kunihiro@zebra.org>
2316 * regex.c: Update to glibc-2.1.1's posix/regex.c
2318 * regex-gnu.h: Update to glibc-2.1.1's posix/regex.h
2320 * prefix.h (IPV4_ADDR_SAME): Macro added.
2321 (IPV6_ADDR_SAME): Likewise.
2323 1999-06-29 Kunihiro Ishiguro <kunihiro@zebra.org>
2325 * memory.h (enum): Add MTYPE_OSPF_VERTEX
2327 * version.h: Bump up to 0.71.
2329 * vty.c (vty_serv_sock_addrinfo): Use addrinfo function to bind
2330 VTY socket when IPv6 is enabled.
2332 1999-06-28 Kunihiro Ishiguro <kunihiro@zebra.org>
2334 * vty.c (vty_serv_sock): Change vty_serv_sock determine which
2335 address family to bind.
2337 * command.c: Add quit command.
2339 1999-06-26 NOGUCHI kay <kay@dti.ad.jp>
2341 * vty.c (vty_read_config): Fix bug of configuration file path
2344 1999-06-25 Kunihiro Ishiguro <kunihiro@zebra.org>
2346 * version.h: Bump up to 0.70.
2348 1999-06-17 Kunihiro Ishiguro <kunihiro@zebra.org>
2350 * buffer.h (GETL): Remove GETL macro.
2352 * version.h: Bump up to 0.69.
2354 1999-06-14 Kunihiro Ishiguro <kunihiro@zebra.org>
2356 * if.c (connected_add): Commented out connected_log.
2358 1999-06-13 Kunihiro Ishiguro <kunihiro@zebra.org>
2360 * command.h (struct cmd_element ): strvec and descvec is combined
2363 * command.c (desc_make): Function removed.
2364 (desc_next): Function removed.
2366 * command.h (struct cmd_element ): docvec is removed from struct
2369 1999-06-12 Kunihiro Ishiguro <kunihiro@zebra.org>
2371 * command.c (cmd_execute_command): Remove command NULL check.
2373 * command.h (struct cmd_element ): Add newstrvec entry to struct
2375 (DEFUN2): DEFUN2 macro is removed. DEFUN is extended to support
2377 (DESC): DESC macro is removed.
2379 * vty.c (vty_complete_command): When return value is
2380 CMD_ERR_NO_MATCH, don't display error message.
2382 1999-06-08 Kunihiro Ishiguro <kunihiro@zebra.org>
2384 * table.c (route_next_until): New function.
2386 * version.h: Bump up to 0.68.
2388 1999-06-06 Kunihiro Ishiguro <kunihiro@zebra.org>
2390 * vty.c (vty_close): Free vty->buf when vty is closed.
2392 * memory.h (enum): Add MTYPE_COMMUNITY_ENTRY and
2393 MTYPE_COMMUNITY_LIST.
2395 * vty.h (struct vty ): Change buf from static length buffer to
2396 variable length buffer.
2398 * vty.c (vty_ensure): New function added.
2400 1999-06-04 Kunihiro Ishiguro <kunihiro@zebra.org>
2402 * command.h (node_type ): Add COMMUNITY_LIST_NODE.
2404 * command.c (config_enable_password): Freeing host.enable bug is
2406 (config_enable_password): Add argc count check.
2408 1999-05-31 Kunihiro Ishiguro <kunihiro@zebra.org>
2410 * version.h: Bump up to 0.67.
2412 1999-05-30 Kunihiro Ishiguro <kunihiro@zebra.org>
2414 * command.c (zencrypt): New function for encrypt password.
2416 * command.h (struct host): Add password_encrypt and
2419 1999-05-30 Jochen Friedrich <jochen@scram.de>
2421 * command.h (struct host): New member encrypt is added for
2424 1999-05-30 Kunihiro Ishiguro <kunihiro@zebra.org>
2426 * vty.c: Remove all_digit_check function. Instead use all_digit.
2428 * prefix.c (all_digit): New function for checking string is made
2429 from digit character.
2431 1999-05-25 Kunihiro Ishiguro <kunihiro@zebra.org>
2433 * Makefile.am (libzebra_a_SOURCES): Add zclient.c.
2434 (noinst_HEADERS): Add zclient.h
2436 * zclient.[ch]: New file for zebra client routine.
2438 * memory.h (enum): Add MTYPE_ZEBRA.
2440 1999-05-19 Kunihiro Ishiguro <kunihiro@zebra.org>
2442 * version.h (ZEBRA_VERSION): Update to 0.66.
2444 1999-05-15 Kunihiro Ishiguro <kunihiro@zebra.org>
2446 * buffer.h (GETC,GETW): Macro deleted.
2448 1999-05-15 Carlos Alberto Barcenilla <barce@frlp.utn.edu.ar>
2450 * prefix.h (IPV4_NET0, IPV4_NET127): Macro added.
2452 1999-05-15 Kunihiro Ishiguro <kunihiro@zebra.org>
2454 * vty.c (service_advanced_vty): New command added.
2455 (no_service_advanced_vty): Likewise.
2457 1999-05-14 Kunihiro Ishiguro <kunihiro@zebra.org>
2459 * vty.c (vty_auth): If advanced flag is set and enable password is
2460 not set, directly login to the ENABLE_NODE. This feature is
2461 originally designed and implemented by Stephen R. van den Berg
2464 * command.h (host): Add advanced flag to struct host for advanced
2465 vty terminal interface.
2467 * version.h (ZEBRA_VERSION): Update to 0.65 for next beta release.
2469 1999-05-14 Stephen R. van den Berg <srb@cuci.nl>
2471 * command.h (node_type ): Add TABLE_NODE.
2473 * vty.c (vty_telnet_option): Check host.lines value.
2475 * command.c (config_lines): DEFUN for 'lines LINES' command.
2477 * zebra.h: Include <sys/utsname.h> for uname().
2478 (RT_TABLE_MAIN): Defined as 0 if OS does not support multiple
2481 * vty.c (vty_auth): Directly login to the ENABLE_NODE when enable
2482 password is not set.
2483 (vty_prompt): Get machine's hostname when hostname is not set.
2485 1999-05-11 James Willard <james@whispering.org>
2487 * command.c (config_exit): Close connection when `exit' command is
2488 executed at ENABLE_NODE.
2490 1999-05-10 Kunihiro Ishiguro <kunihiro@zebra.org>
2492 * vty.c (vty_stop_input): `C-c' key change node to ENABLE_NODE.
2494 * command.c (cmd_execute_command_strict): Matched command size
2496 (cmd_make_desc_line): New function for DEFUN2.
2498 * command.h (struct cmd_element ): Add descsize.
2500 1999-05-09 Kunihiro Ishiguro <kunihiro@zebra.org>
2502 * command.h (struct cmd_element ): Remame descvec to docvec.
2503 (struct cmd_element ): Add descvec for new description system.
2505 * command.c (desc_make): Check cmd->descvec.
2507 1999-05-06 Kunihiro Ishiguro <kunihiro@zebra.org>
2509 * memory.h (enum): Add MTYPE_CLUSTER, MTYPE_CLUSTER_VAL.
2511 1999-05-05 Kunihiro Ishiguro <kunihiro@zebra.org>
2513 * version.h (ZEBRA_VERSION): Bump up to 0.64 for next beta
2516 1999-05-04 Yasuhiro Ohara <yasu@sfc.wide.ad.jp>
2518 * linklist.c (list_delete_all_node): bug fix.
2519 previous code loses current position when node
2522 1999-05-03 Kunihiro Ishiguro <kunihiro@zebra.org>
2524 * command.h (DESC): Macro added.
2525 (struct cmd_element2): Delete struct cmd_element2.
2527 * plist.c (prefix_list): Sequential number option check is added.
2529 1999-05-02 Yasuhiro Ohara <yasu@sfc.wide.ad.jp>
2531 * log.c (zvlog_{debug,info,notice,warn,err}): have been
2532 added. now we can log both console and file, but still
2533 need some fix about config write.
2535 1999-05-02 Kunihiro Ishiguro <kunihiro@zebra.org>
2537 * log.c (zvlog_debug): Fix yasu's change.
2539 1999-05-01 Kunihiro Ishiguro <kunihiro@zebra.org>
2541 * plist.c (prefix_list): Fix typo.
2543 1999-04-30 Kunihiro Ishiguro <kunihiro@zebra.org>
2545 * Set version to 0.63 for first beta package.
2547 1999-04-27 Carlos Barcenilla <barce@frlp.utn.edu.ar>
2549 * prefix.c (str2prefix_ipv4): Fix prefix length check.
2550 (str2prefix_ipv6): Likewise.
2552 1999-04-25 Kunihiro Ishiguro <kunihiro@zebra.org>
2554 * memory.h (enum): Add MTPYE_PREFIX_LIST and
2555 MTYPE_PREFIX_LIST_ENTRY.
2557 * command.h (node_type ): Add PREFIX_NODE.
2559 1999-04-25 Carlos Barcenilla <barce@frlp.utn.edu.ar>
2561 * command.c: ALIAS (config_write_memory_cmd) and ALIAS
2562 (copy_runningconfig_startupconfig_cmd) is added.
2564 * table.c (route_node_lookup): Unused match variable deletion.
2566 1999-04-24 Kunihiro Ishiguro <kunihiro@zebra.org>
2568 * Makefile.am (libzebra_a_SOURCES): plist.c added.
2569 (noinst_HEADERS): plist.h added.
2571 * plist.c, plist.h: New file added.
2573 * memory.h (enum): Rename MTYPE_AS_PASN to MTYPE_AS_STR.
2574 * memory.c: Likewise.
2576 1999-04-19 Carlos Alberto Barcenilla <barce@frlp.utn.edu.ar>
2578 * command.c (show_version): `show version' command added.
2580 1999-04-19 Kunihiro Ishiguro <kunihiro@zebra.org>
2582 * prefix.c (str2prefix_ipv6): Prefix length overflow check.
2584 1999-04-19 Carlos Alberto Barcenilla <barce@frlp.utn.edu.ar>
2586 * prefix.c (str2prefix_ipv4): Prefix length overflow check.
2588 1999-04-19 Alex Bligh <amb@gxn.net>
2590 * prefix.c (sockunion2hostprefix): Function added.
2591 (sockunion2prefix): Address family was not set. Now it is set.
2593 * vty.c: VTY access-class command is added.
2595 1999-04-18 Kunihiro Ishiguro <kunihiro@zebra.org>
2597 * memory.c: Change xmalloc to zmalloc. xcalloc, xrealloc, xfree,
2598 xstrdup are likewise.
2600 1999-04-18 Yasuhiro Ohara <yasu@sfc.wide.ad.jp>
2602 * thread.c: Add thread_execute for other routing daemon.
2603 OSPF tasks need to be generated by "sheduled" and "executed".
2605 1999-04-13 Kunihiro Ishiguro <kunihiro@zebra.org>
2607 * buffer.c: Rewrite buffer_write and buffer_flush related
2608 functions for fixing bugs. Reason of the problem and fix is
2609 suggested by Alex Bligh <amb@gxn.net>.
2611 1999-04-12 Alex Bligh <amb@gxn.net>
2613 * command.c (cmd_entry_function_descr): Added for variable
2614 argument help display.
2616 1999-04-07 Kunihiro Ishiguro <kunihiro@zebra.org>
2618 * regex.c, regex-gnu.h: Imported from GNU sed-3.02 distribution.
2620 1999-03-24 Kunihiro Ishiguro <kunihiro@zebra.org>
2622 * stream.c: stream_fifo_free bug is fixed.
2624 1999-03-19 Toshiaki Takada <takada@zebra.org>
2626 * stream.c (stream_strncpy): Added for getting any length bytes
2629 1999-03-16 Kunihiro Ishiguro <kunihiro@zebra.org>
2631 * version.h (ZEBRA_BUG_ADDRESS): New macro added.
2633 1999-03-14 Kunihiro Ishiguro <kunihiro@zebra.org>
2635 * buffer.c (buffer_flush_window): If ep is same as buffer's size
2636 length and lp is overrun one octet.
2638 1999-03-13 Kunihiro Ishiguro <kunihiro@zebra.org>
2640 * vty.h: add VTY's timeout function.
2642 1999-03-05 <kunihiro@zebra.org>
2644 * command.h (node_type ): Add OSPF6_node.
2646 1999-03-04 Kunihiro Ishiguro <kunihiro@zebra.org>
2648 * zebra.h: Check HAVE_SYS_SELECT_H when include <sys/select.h>
2650 1999-03-03 Jeroen Ruigrok/Asmodai <asmodai@wxs.nl>
2652 * zebra.h: Include <net/if_var.h> if it exists.
2654 1999-03-02 Kunihiro Ishiguro <kunihiro@zebra.org>
2656 * getopt.[ch],getopt1.c: Sync with glibc-2.1.
2658 * log.c (zlog): Tempolary ZLOG_STDOUT feature added.
2660 * command.h: Include vector.h and vty.h
2662 1999-02-25 Kunihiro Ishiguro <kunihiro@zebra.org>
2664 * routemap.h (struct route_map_rule_cmd): Add prefix arguemnt.
2666 * routemap.c (route_map_apply_index): Add prefix argument.
2667 (route_map_apply): Likewise.
2669 * memory.h (enum): Add MTYPE_ROUTE_MAP_COMPILED.
2671 * stream.c: Add stream_fifo related functions.
2673 1999-02-24 Kunihiro Ishiguro <kunihiro@zebra.org>
2675 * daemon.c: Return integer value. File descriptor close is added.
2677 * memory.h (enum): add MTYPE_OSPF_LSA.
2679 1999-02-23 Kunihiro Ishiguro <kunihiro@zebra.org>
2681 * rsh.c: Remove empty file.
2683 1999-02-22 <kunihiro@zebra.org>
2685 * routemap.c: Add add/delete hook to route_map_master.
2687 1999-02-19 Peter Galbavy <Peter.Galbavy@knowledge.com>
2689 * str.[ch] added to supply wrappers for snprintf(), strlcat() and
2690 strlcpy on system without these.
2692 1999-02-18 Peter Galbavy <Peter.Galbavy@knowledge.com>
2694 * syslog support added
2696 1999-02-02 Kunihiro Ishiguro <kunihiro@zebra.org>
2698 * filter.c (access_list_add_hook): added for hook function management.
2699 * filter.c (access_list_delete_hook): Likewise.
2701 1999-01-19 Kunihiro Ishiguro <kunihiro@zebra.org>
2703 * stream.c: New file.
2704 * stream.h: New file.
2705 * Divide stream related fucntions from buffer.[ch] into stream.[ch].
2707 1999-01-14 Kunihiro Ishiguro <kunihiro@zebra.org>
2709 * memory.h (enum): add MTYPE_STREAM, MTYPE_STREAM_DATA
2711 * buffer.c (stream_new): Set MTYPE_STREAM to XMALLOC argument.
2713 1998-12-23 Kunihiro Ishiguro <kunihiro@zebra.org>
2715 * routemap.c: route_map_index_delete() added.
2717 1998-12-22 Kunihiro Ishiguro <kunihiro@zebra.org>
2719 * buffer.c (buffer_empty): check cp instead of sp.
2721 1998-12-17 Kunihiro Ishiguro <kunihiro@zebra.org>
2723 * radix.[ch]: Deleted.
2725 1998-12-15 Magnus Ahltorp <map@stacken.kth.se>
2727 * buffer.c: Prototype fixes.
2728 * prefix.c: Likewise.
2729 * sockunion.c: Likewise.
2730 * sockunion.h: Likewise.
2732 1998-12-14 Kunihiro Ishiguro <kunihiro@zebra.org>
2734 * vty.c (vty_read): DELETE key works as vty_delete_char.
2736 1998-12-13 Kunihiro Ishiguro <kunihiro@zebra.org>
2738 * log.c (time_print): chane %y to %Y.
2740 1998-12-10 Kunihiro Ishiguro <kunihiro@zebra.org>
2742 * distribute.c: new file.
2744 1998-12-09 Kunihiro Ishiguro <kunihiro@zebra.org>
2746 * filter.c: Remove all of struct prefix_{ipv4,ipv6} and add
2747 complete support of IPv6 access list.
2749 * command.c (config_write_element): function delete.
2750 (config_write_host): function add. password and enable password
2751 isn't printed to vty interface.
2753 1998-12-08 Kunihiro Ishiguro <kunihiro@zebra.org>
2755 * filter.c: Change prefix_ipv4 to prefix and add support of
2756 prefix_ipv6 filtering.
2758 1998-12-07 Kunihiro Ishiguro <kunihiro@zebra.org>
2760 * Makefile.am (INCLUDES): add @INCLUDES@ for Linux IPv6 inet6-apps
2763 1998-12-05 Kunihiro Ishiguro <kunihiro@zebra.org>
2765 * log.c (log_flush): fix function name typo.
2767 1998-12-04 Yasuhiro Ohara <yasu@sfc.wide.ad.jp>
2769 * memory.h: OSPF memory type is added.
2771 1998-11-15 Kunihiro Ishiguro <kunihiro@zebra.org>
2773 * command.c (sort_node): add sort_node() for pretty printing of
2774 command on vty interface.
2775 (config_password): delete the restriction of charaster of password
2778 1998-09-05 Kunihiro Ishiguro <kunihiro@debian.zebra.org>
2780 * prefix.c (prefix_ipv4_any): add prefix_ipv4_any().
2782 1998-08-25 Kunihiro Ishiguro <kunihiro@zebra.org>
2784 * network.h: New file.
2786 1998-08-24 Kunihiro Ishiguro <kunihiro@zebra.org>
2788 * vty.c (vty_will_echo): function name change from vty_off_echo.
2790 1998-08-18 Kunihiro Ishiguro <kunihiro@zebra.org>
2792 * buffer.h: add PUTC,PUTW,PUTL macros.
2794 1998-07-22 Kunihiro Ishiguro <kunihiro@zebra.org>
2796 * route.[ch]: renamed to prefix.[ch]
2798 1998-06-09 Kunihiro Ishiguro <kunihiro@zebra.org>
2800 * prefix_in, prefix_in6 is replaced by prefix_ipv4, prefix_ipv6.
2802 * Makefile.am: @INCLUDES@ is deleted from INCLUDES.
2804 1998-06-07 Kunihiro Ishiguro <kunihiro@zebra.org>
2806 * host.[ch]: merged with command.[ch]
2808 1998-05-08 Kunihiro Ishiguro <kunihiro@zebra.org>
2810 * Makefile.am (libzebra_a_SOURCES): add route.c to libzebra_a_SOURCES.
2812 1998-05-07 Kunihiro Ishiguro <kunihiro@zebra.org>
2814 * route.c (str2prefix): str2prefix () is gone.
2816 1998-05-03 Kunihiro Ishiguro <kunihiro@zebra.org>
2818 * vty.c (vty_read_config): change CONDIR to SYSCONFDIR.
2820 * .cvsignore: add file.
2822 * memory.c (xerror): add arguent `type' and `size'.
2824 * socket.c: deleted.
2826 1998-05-02 Kunihiro Ishiguro <kunihiro@zebra.org>
2828 * vector.c: malloc,free,realloc -> XMALLOC,XFREE,XREALLOC.
2829 * linklist.c: same as above.
2831 1998-04-30 Kunihiro Ishiguro <kunihiro@zebra.org>
2833 * filter.[ch]: added.
2835 1998-04-01 Kunihiro Ishiguro <kunihiro@zebra.org>
2837 * vty.c (config_who): return CMD_SUCCESS
2839 1998-04-01 Jochen Friedrich <jochen@scram.de>
2841 * table.c (route_dump_node): route_dump_node is IPv6 specific
2842 function so move #ifdef to the end of route_dump_node ().
2844 1998-03-05 "Hannes R. Boehm" <hannes@boehm.org>
2846 * if.c: DEFUN(interface_desc) added.
2848 1998-03-05 Kunihiro Ishiguro <kunihiro@zebra.org>
2850 * if.c: separated from ripd/rip_interface.c
2852 1998-03-04 Kunihiro Ishiguro <kunihiro@zebra.org>
2854 * thread.[ch] : added.
2856 1998-02-14 Kunihiro Ishiguro <kunihiro@zebra.org>
2858 * vty.c (vty_delete_char): fix size bug.
2859 (vty_backward_pure_word): function added.
2860 (vty_read): ESC + 'f' perform vty_forward_word.
2861 (vty_read): ESC + 'b' perform vty_backward_word.
2863 1998-02-11 Kunihiro Ishiguro <kunihiro@zebra.org>
2865 * radix.c (radix_lookup_rt): add mask check.
2866 (radix_delete_duproute): add mask check.
2868 1998-02-10 Kunihiro Ishiguro <kunihiro@zebra.org>
2870 * command.c (config_write_file): fix vty -> file_vty.
2872 1998-02-06 Kunihiro Ishiguro <kunihiro@zebra.org>
2874 * command.c (cmd_filter_ambiguous): add complex type treatment.
2876 1998-02-05 Kunihiro Ishiguro <kunihiro@zebra.org>
2878 * vty.c (vty_time_print): function added.
2879 (vty_complete_command): now [...] element isn't shown by completion.
2881 1998-01-26 Kunihiro Ishiguro <kunihiro@zebra.org>
2883 * command.c : change from cmd_install_node() to install_node().
2885 1998-01-16 Kunihiro Ishiguro <kunihiro@zebra.org>
2887 * route.[ch]: struct rt{} is replaced by struct prefix{}.
2889 1998-01-06 Kunihiro Ishiguro <kunihiro@zebra.org>
2891 * command.c (cmd_execute_command): check command length.
2893 * timer.c (zebra_timer_set): add zebra_timer_set.
2895 1998-01-05 Kunihiro Ishiguro <kunihiro@zebra.org>
2897 * command.h (node_type ): add ZEBRA_NODE.
2899 * command.c (config_exit): add RIP_NODE.
2900 (config_write_file): add RIP_NODE.
2902 1998-01-04 Kunihiro Ishiguro <kunihiro@zebra.org>
2904 * print_version.c (print_version): Now Copyright is 1996-1998.
2906 * sockunion.c (sockunion_log): moved from ../zebra/route.c
2908 1997-12-30 Kunihiro Ishiguro <kunihiro@zebra.org>
2910 * host.c (config_logfile): change 'log PATH' to 'logfile PATH'.
2912 * sockunion.c (sockunion_sameprefix): add same prefix for
2915 1997-12-29 Kunihiro Ishiguro <kunihiro@zebra.org>
2917 * radix.[ch] : are moved from ../zebra directroy.
2919 * command.c (config_from_file): if command execution failed down
2920 level to CONFIG_NODE.
2922 * host.c: config_log function which enable 'log FILENAME' command.
2924 1997-12-23 Kunihiro Ishiguro <kunihiro@zebra.org>
2926 * vty.c: add vty_transpose_chars (). Now you can use '^T' to
2927 transpose character.
2929 * command.c: cmd_cmdsize add, this is useful to check incomplete
2932 1997-12-07 Kunihiro Ishiguro <kunihiro@zebra.org>
2934 * fd.h: add family for address family
2936 1997-12-06 Kunihiro Ishiguro <kunihiro@zebra.org>
2940 * host.o is moved from ../zebra
2942 1997-08-14 Kunihiro Ishiguro <kunihiro@zebra.org>
2944 * make library directory.