2 <!DOCTYPE refentry PUBLIC
"-//OASIS//DTD DocBook XML V4.5//EN"
3 "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
4 <!-- SPDX-License-Identifier: LGPL-2.1+ -->
6 <refentry id=
"systemd.exec" xmlns:
xi=
"http://www.w3.org/2001/XInclude">
8 <title>systemd.exec
</title>
9 <productname>systemd
</productname>
13 <refentrytitle>systemd.exec
</refentrytitle>
14 <manvolnum>5</manvolnum>
18 <refname>systemd.exec
</refname>
19 <refpurpose>Execution environment configuration
</refpurpose>
23 <para><filename><replaceable>service
</replaceable>.service
</filename>,
24 <filename><replaceable>socket
</replaceable>.socket
</filename>,
25 <filename><replaceable>mount
</replaceable>.mount
</filename>,
26 <filename><replaceable>swap
</replaceable>.swap
</filename></para>
30 <title>Description
</title>
32 <para>Unit configuration files for services, sockets, mount points, and swap devices share a subset of
33 configuration options which define the execution environment of spawned processes.
</para>
35 <para>This man page lists the configuration options shared by these four unit types. See
36 <citerefentry><refentrytitle>systemd.unit
</refentrytitle><manvolnum>5</manvolnum></citerefentry> for the common
37 options of all unit configuration files, and
38 <citerefentry><refentrytitle>systemd.service
</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
39 <citerefentry><refentrytitle>systemd.socket
</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
40 <citerefentry><refentrytitle>systemd.swap
</refentrytitle><manvolnum>5</manvolnum></citerefentry>, and
41 <citerefentry><refentrytitle>systemd.mount
</refentrytitle><manvolnum>5</manvolnum></citerefentry> for more
42 information on the specific unit configuration files. The execution specific configuration options are configured
43 in the [Service], [Socket], [Mount], or [Swap] sections, depending on the unit type.
</para>
45 <para>In addition, options which control resources through Linux Control Groups (cgroups) are listed in
46 <citerefentry><refentrytitle>systemd.resource-control
</refentrytitle><manvolnum>5</manvolnum></citerefentry>.
47 Those options complement options listed here.
</para>
51 <title>Implicit Dependencies
</title>
53 <para>A few execution parameters result in additional, automatic dependencies to be added:
</para>
56 <listitem><para>Units with
<varname>WorkingDirectory=
</varname>,
<varname>RootDirectory=
</varname>,
57 <varname>RootImage=
</varname>,
<varname>RuntimeDirectory=
</varname>,
<varname>StateDirectory=
</varname>,
58 <varname>CacheDirectory=
</varname>,
<varname>LogsDirectory=
</varname> or
59 <varname>ConfigurationDirectory=
</varname> set automatically gain dependencies of type
60 <varname>Requires=
</varname> and
<varname>After=
</varname> on all mount units required to access the specified
61 paths. This is equivalent to having them listed explicitly in
62 <varname>RequiresMountsFor=
</varname>.
</para></listitem>
64 <listitem><para>Similar, units with
<varname>PrivateTmp=
</varname> enabled automatically get mount unit
65 dependencies for all mounts required to access
<filename>/tmp
</filename> and
<filename>/var/tmp
</filename>. They
66 will also gain an automatic
<varname>After=
</varname> dependency on
67 <citerefentry><refentrytitle>systemd-tmpfiles-setup.service
</refentrytitle><manvolnum>8</manvolnum></citerefentry>.
</para></listitem>
69 <listitem><para>Units whose standard output or error output is connected to
<option>journal
</option> or
70 <option>kmsg
</option> (or their combinations with console output, see below) automatically acquire
71 dependencies of type
<varname>After=
</varname> on
72 <filename>systemd-journald.socket
</filename>.
</para></listitem>
74 <listitem><para>Units using
<varname>LogNamespace=
</varname> will automatically gain ordering and
75 requirement dependencies on the two socket units associated with
76 <filename>systemd-journald@.service
</filename> instances.
</para></listitem>
80 <!-- We don't have any default dependency here. -->
85 <para>The following settings may be used to change a service's view of the filesystem. Please note that the paths
86 must be absolute and must not contain a
<literal>..
</literal> path component.
</para>
88 <variablelist class='unit-directives'
>
91 <term><varname>WorkingDirectory=
</varname></term>
93 <listitem><para>Takes a directory path relative to the service's root directory specified by
94 <varname>RootDirectory=
</varname>, or the special value
<literal>~
</literal>. Sets the working directory for
95 executed processes. If set to
<literal>~
</literal>, the home directory of the user specified in
96 <varname>User=
</varname> is used. If not set, defaults to the root directory when systemd is running as a
97 system instance and the respective user's home directory if run as user. If the setting is prefixed with the
98 <literal>-
</literal> character, a missing working directory is not considered fatal. If
99 <varname>RootDirectory=
</varname>/
<varname>RootImage=
</varname> is not set, then
100 <varname>WorkingDirectory=
</varname> is relative to the root of the system running the service manager. Note
101 that setting this parameter might result in additional dependencies to be added to the unit (see
102 above).
</para></listitem>
106 <term><varname>RootDirectory=
</varname></term>
108 <listitem><para>Takes a directory path relative to the host's root directory (i.e. the root of the system
109 running the service manager). Sets the root directory for executed processes, with the
<citerefentry
110 project='man-pages'
><refentrytitle>chroot
</refentrytitle><manvolnum>2</manvolnum></citerefentry> system
111 call. If this is used, it must be ensured that the process binary and all its auxiliary files are available in
112 the
<function>chroot()
</function> jail. Note that setting this parameter might result in additional
113 dependencies to be added to the unit (see above).
</para>
115 <para>The
<varname>MountAPIVFS=
</varname> and
<varname>PrivateUsers=
</varname> settings are particularly useful
116 in conjunction with
<varname>RootDirectory=
</varname>. For details, see below.
</para>
118 <xi:include href=
"system-only.xml" xpointer=
"singular"/></listitem>
122 <term><varname>RootImage=
</varname></term>
124 <listitem><para>Takes a path to a block device node or regular file as argument. This call is similar
125 to
<varname>RootDirectory=
</varname> however mounts a file system hierarchy from a block device node
126 or loopback file instead of a directory. The device node or file system image file needs to contain a
127 file system without a partition table, or a file system within an MBR/MS-DOS or GPT partition table
128 with only a single Linux-compatible partition, or a set of file systems within a GPT partition table
129 that follows the
<ulink url=
"https://systemd.io/DISCOVERABLE_PARTITIONS">Discoverable Partitions
130 Specification
</ulink>.
</para>
132 <para>When
<varname>DevicePolicy=
</varname> is set to
<literal>closed
</literal> or
133 <literal>strict
</literal>, or set to
<literal>auto
</literal> and
<varname>DeviceAllow=
</varname> is
134 set, then this setting adds
<filename>/dev/loop-control
</filename> with
<constant>rw
</constant> mode,
135 <literal>block-loop
</literal> and
<literal>block-blkext
</literal> with
<constant>rwm
</constant> mode
136 to
<varname>DeviceAllow=
</varname>. See
137 <citerefentry><refentrytitle>systemd.resource-control
</refentrytitle><manvolnum>5</manvolnum></citerefentry>
138 for the details about
<varname>DevicePolicy=
</varname> or
<varname>DeviceAllow=
</varname>. Also, see
139 <varname>PrivateDevices=
</varname> below, as it may change the setting of
140 <varname>DevicePolicy=
</varname>.
</para>
142 <xi:include href=
"system-only.xml" xpointer=
"singular"/></listitem>
146 <term><varname>MountAPIVFS=
</varname></term>
148 <listitem><para>Takes a boolean argument. If on, a private mount namespace for the unit's processes is created
149 and the API file systems
<filename>/proc
</filename>,
<filename>/sys
</filename>, and
<filename>/dev
</filename>
150 are mounted inside of it, unless they are already mounted. Note that this option has no effect unless used in
151 conjunction with
<varname>RootDirectory=
</varname>/
<varname>RootImage=
</varname> as these three mounts are
152 generally mounted in the host anyway, and unless the root directory is changed, the private mount namespace
153 will be a
1:
1 copy of the host's, and include these three mounts. Note that the
<filename>/dev
</filename> file
154 system of the host is bind mounted if this option is used without
<varname>PrivateDevices=
</varname>. To run
155 the service with a private, minimal version of
<filename>/dev/
</filename>, combine this option with
156 <varname>PrivateDevices=
</varname>.
</para>
158 <xi:include href=
"system-only.xml" xpointer=
"singular"/></listitem>
162 <term><varname>BindPaths=
</varname></term>
163 <term><varname>BindReadOnlyPaths=
</varname></term>
165 <listitem><para>Configures unit-specific bind mounts. A bind mount makes a particular file or directory
166 available at an additional place in the unit's view of the file system. Any bind mounts created with this
167 option are specific to the unit, and are not visible in the host's mount table. This option expects a
168 whitespace separated list of bind mount definitions. Each definition consists of a colon-separated triple of
169 source path, destination path and option string, where the latter two are optional. If only a source path is
170 specified the source and destination is taken to be the same. The option string may be either
171 <literal>rbind
</literal> or
<literal>norbind
</literal> for configuring a recursive or non-recursive bind
172 mount. If the destination path is omitted, the option string must be omitted too.
173 Each bind mount definition may be prefixed with
<literal>-
</literal>, in which case it will be ignored
174 when its source path does not exist.
</para>
176 <para><varname>BindPaths=
</varname> creates regular writable bind mounts (unless the source file system mount
177 is already marked read-only), while
<varname>BindReadOnlyPaths=
</varname> creates read-only bind mounts. These
178 settings may be used more than once, each usage appends to the unit's list of bind mounts. If the empty string
179 is assigned to either of these two options the entire list of bind mounts defined prior to this is reset. Note
180 that in this case both read-only and regular bind mounts are reset, regardless which of the two settings is
183 <para>This option is particularly useful when
<varname>RootDirectory=
</varname>/
<varname>RootImage=
</varname>
184 is used. In this case the source path refers to a path on the host file system, while the destination path
185 refers to a path below the root directory of the unit.
</para>
187 <para>Note that the destination directory must exist or systemd must be able to create it. Thus, it
188 is not possible to use those options for mount points nested underneath paths specified in
189 <varname>InaccessiblePaths=
</varname>, or under
<filename>/home/
</filename> and other protected
190 directories if
<varname>ProtectHome=yes
</varname> is
191 specified.
<varname>TemporaryFileSystem=
</varname> with
<literal>:ro
</literal> or
192 <varname>ProtectHome=tmpfs
</varname> should be used instead.
</para>
194 <xi:include href=
"system-only.xml" xpointer=
"singular"/></listitem>
201 <title>Credentials
</title>
203 <xi:include href=
"system-only.xml" xpointer=
"plural"/>
205 <variablelist class='unit-directives'
>
208 <term><varname>User=
</varname></term>
209 <term><varname>Group=
</varname></term>
211 <listitem><para>Set the UNIX user or group that the processes are executed as, respectively. Takes a single
212 user or group name, or a numeric ID as argument. For system services (services run by the system service
213 manager, i.e. managed by PID
1) and for user services of the root user (services managed by root's instance of
214 <command>systemd --user
</command>), the default is
<literal>root
</literal>, but
<varname>User=
</varname> may be
215 used to specify a different user. For user services of any other user, switching user identity is not
216 permitted, hence the only valid setting is the same user the user's service manager is running as. If no group
217 is set, the default group of the user is used. This setting does not affect commands whose command line is
218 prefixed with
<literal>+
</literal>.
</para>
220 <para>Note that this enforces only weak restrictions on the user/group name syntax, but will generate
221 warnings in many cases where user/group names do not adhere to the following rules: the specified
222 name should consist only of the characters a-z, A-Z,
0-
9,
<literal>_
</literal> and
223 <literal>-
</literal>, except for the first character which must be one of a-z, A-Z and
224 <literal>_
</literal> (i.e. digits and
<literal>-
</literal> are not permitted as first character). The
225 user/group name must have at least one character, and at most
31. These restrictions are made in
226 order to avoid ambiguities and to ensure user/group names and unit files remain portable among Linux
227 systems. For further details on the names accepted and the names warned about see
<ulink
228 url=
"https://systemd.io/USER_NAMES">User/Group Name Syntax
</ulink>.
</para>
230 <para>When used in conjunction with
<varname>DynamicUser=
</varname> the user/group name specified is
231 dynamically allocated at the time the service is started, and released at the time the service is
232 stopped — unless it is already allocated statically (see below). If
<varname>DynamicUser=
</varname>
233 is not used the specified user and group must have been created statically in the user database no
234 later than the moment the service is started, for example using the
235 <citerefentry><refentrytitle>sysusers.d
</refentrytitle><manvolnum>5</manvolnum></citerefentry>
236 facility, which is applied at boot or package install time. If the user does not exist by then
237 program invocation will fail.
</para>
239 <para>If the
<varname>User=
</varname> setting is used the supplementary group list is initialized
240 from the specified user's default group list, as defined in the system's user and group
241 database. Additional groups may be configured through the
<varname>SupplementaryGroups=
</varname>
242 setting (see below).
</para></listitem>
246 <term><varname>DynamicUser=
</varname></term>
248 <listitem><para>Takes a boolean parameter. If set, a UNIX user and group pair is allocated
249 dynamically when the unit is started, and released as soon as it is stopped. The user and group will
250 not be added to
<filename>/etc/passwd
</filename> or
<filename>/etc/group
</filename>, but are managed
251 transiently during runtime. The
252 <citerefentry><refentrytitle>nss-systemd
</refentrytitle><manvolnum>8</manvolnum></citerefentry> glibc
253 NSS module provides integration of these dynamic users/groups into the system's user and group
254 databases. The user and group name to use may be configured via
<varname>User=
</varname> and
255 <varname>Group=
</varname> (see above). If these options are not used and dynamic user/group
256 allocation is enabled for a unit, the name of the dynamic user/group is implicitly derived from the
257 unit name. If the unit name without the type suffix qualifies as valid user name it is used directly,
258 otherwise a name incorporating a hash of it is used. If a statically allocated user or group of the
259 configured name already exists, it is used and no dynamic user/group is allocated. Note that if
260 <varname>User=
</varname> is specified and the static group with the name exists, then it is required
261 that the static user with the name already exists. Similarly, if
<varname>Group=
</varname> is
262 specified and the static user with the name exists, then it is required that the static group with
263 the name already exists. Dynamic users/groups are allocated from the UID/GID range
61184…
65519. It is
264 recommended to avoid this range for regular system or login users. At any point in time each UID/GID
265 from this range is only assigned to zero or one dynamically allocated users/groups in use. However,
266 UID/GIDs are recycled after a unit is terminated. Care should be taken that any processes running as
267 part of a unit for which dynamic users/groups are enabled do not leave files or directories owned by
268 these users/groups around, as a different unit might get the same UID/GID assigned later on, and thus
269 gain access to these files or directories. If
<varname>DynamicUser=
</varname> is enabled,
270 <varname>RemoveIPC=
</varname> and
<varname>PrivateTmp=
</varname> are implied (and cannot be turned
271 off). This ensures that the lifetime of IPC objects and temporary files created by the executed
272 processes is bound to the runtime of the service, and hence the lifetime of the dynamic
273 user/group. Since
<filename>/tmp/
</filename> and
<filename>/var/tmp/
</filename> are usually the only
274 world-writable directories on a system this ensures that a unit making use of dynamic user/group
275 allocation cannot leave files around after unit termination. Furthermore
276 <varname>NoNewPrivileges=
</varname> and
<varname>RestrictSUIDSGID=
</varname> are implicitly enabled
277 (and cannot be disabled), to ensure that processes invoked cannot take benefit or create SUID/SGID
278 files or directories. Moreover
<varname>ProtectSystem=strict
</varname> and
279 <varname>ProtectHome=read-only
</varname> are implied, thus prohibiting the service to write to
280 arbitrary file system locations. In order to allow the service to write to certain directories, they
281 have to be whitelisted using
<varname>ReadWritePaths=
</varname>, but care must be taken so that
282 UID/GID recycling doesn't create security issues involving files created by the service. Use
283 <varname>RuntimeDirectory=
</varname> (see below) in order to assign a writable runtime directory to a
284 service, owned by the dynamic user/group and removed automatically when the unit is terminated. Use
285 <varname>StateDirectory=
</varname>,
<varname>CacheDirectory=
</varname> and
286 <varname>LogsDirectory=
</varname> in order to assign a set of writable directories for specific
287 purposes to the service in a way that they are protected from vulnerabilities due to UID reuse (see
288 below). If this option is enabled, care should be taken that the unit's processes do not get access
289 to directories outside of these explicitly configured and managed ones. Specifically, do not use
290 <varname>BindPaths=
</varname> and be careful with
<constant>AF_UNIX
</constant> file descriptor
291 passing for directory file descriptors, as this would permit processes to create files or directories
292 owned by the dynamic user/group that are not subject to the lifecycle and access guarantees of the
293 service. Defaults to off.
</para></listitem>
297 <term><varname>SupplementaryGroups=
</varname></term>
299 <listitem><para>Sets the supplementary Unix groups the processes are executed as. This takes a space-separated
300 list of group names or IDs. This option may be specified more than once, in which case all listed groups are
301 set as supplementary groups. When the empty string is assigned, the list of supplementary groups is reset, and
302 all assignments prior to this one will have no effect. In any way, this option does not override, but extends
303 the list of supplementary groups configured in the system group database for the user. This does not affect
304 commands prefixed with
<literal>+
</literal>.
</para></listitem>
308 <term><varname>PAMName=
</varname></term>
310 <listitem><para>Sets the PAM service name to set up a session as. If set, the executed process will be
311 registered as a PAM session under the specified service name. This is only useful in conjunction with the
312 <varname>User=
</varname> setting, and is otherwise ignored. If not set, no PAM session will be opened for the
313 executed processes. See
<citerefentry
314 project='man-pages'
><refentrytitle>pam
</refentrytitle><manvolnum>8</manvolnum></citerefentry> for
317 <para>Note that for each unit making use of this option a PAM session handler process will be maintained as
318 part of the unit and stays around as long as the unit is active, to ensure that appropriate actions can be
319 taken when the unit and hence the PAM session terminates. This process is named
<literal>(sd-pam)
</literal> and
320 is an immediate child process of the unit's main process.
</para>
322 <para>Note that when this option is used for a unit it is very likely (depending on PAM configuration) that the
323 main unit process will be migrated to its own session scope unit when it is activated. This process will hence
324 be associated with two units: the unit it was originally started from (and for which
325 <varname>PAMName=
</varname> was configured), and the session scope unit. Any child processes of that process
326 will however be associated with the session scope unit only. This has implications when used in combination
327 with
<varname>NotifyAccess=
</varname><option>all
</option>, as these child processes will not be able to affect
328 changes in the original unit through notification messages. These messages will be considered belonging to the
329 session scope unit and not the original unit. It is hence not recommended to use
<varname>PAMName=
</varname> in
330 combination with
<varname>NotifyAccess=
</varname><option>all
</option>.
</para>
338 <title>Capabilities
</title>
340 <xi:include href=
"system-only.xml" xpointer=
"plural"/>
342 <variablelist class='unit-directives'
>
345 <term><varname>CapabilityBoundingSet=
</varname></term>
347 <listitem><para>Controls which capabilities to include in the capability bounding set for the executed
348 process. See
<citerefentry
349 project='man-pages'
><refentrytitle>capabilities
</refentrytitle><manvolnum>7</manvolnum></citerefentry> for
350 details. Takes a whitespace-separated list of capability names, e.g.
<constant>CAP_SYS_ADMIN
</constant>,
351 <constant>CAP_DAC_OVERRIDE
</constant>,
<constant>CAP_SYS_PTRACE
</constant>. Capabilities listed will be
352 included in the bounding set, all others are removed. If the list of capabilities is prefixed with
353 <literal>~
</literal>, all but the listed capabilities will be included, the effect of the assignment
354 inverted. Note that this option also affects the respective capabilities in the effective, permitted and
355 inheritable capability sets. If this option is not used, the capability bounding set is not modified on process
356 execution, hence no limits on the capabilities of the process are enforced. This option may appear more than
357 once, in which case the bounding sets are merged by
<constant>OR
</constant>, or by
<constant>AND
</constant> if
358 the lines are prefixed with
<literal>~
</literal> (see below). If the empty string is assigned to this option,
359 the bounding set is reset to the empty capability set, and all prior settings have no effect. If set to
360 <literal>~
</literal> (without any further argument), the bounding set is reset to the full set of available
361 capabilities, also undoing any previous settings. This does not affect commands prefixed with
362 <literal>+
</literal>.
</para>
364 <para>Example: if a unit has the following,
365 <programlisting>CapabilityBoundingSet=CAP_A CAP_B
366 CapabilityBoundingSet=CAP_B CAP_C
</programlisting>
367 then
<constant index='false'
>CAP_A
</constant>,
<constant index='false'
>CAP_B
</constant>, and
368 <constant index='false'
>CAP_C
</constant> are set. If the second line is prefixed with
369 <literal>~
</literal>, e.g.,
370 <programlisting>CapabilityBoundingSet=CAP_A CAP_B
371 CapabilityBoundingSet=~CAP_B CAP_C
</programlisting>
372 then, only
<constant index='false'
>CAP_A
</constant> is set.
</para></listitem>
376 <term><varname>AmbientCapabilities=
</varname></term>
378 <listitem><para>Controls which capabilities to include in the ambient capability set for the executed
379 process. Takes a whitespace-separated list of capability names, e.g.
<constant>CAP_SYS_ADMIN
</constant>,
380 <constant>CAP_DAC_OVERRIDE
</constant>,
<constant>CAP_SYS_PTRACE
</constant>. This option may appear more than
381 once in which case the ambient capability sets are merged (see the above examples in
382 <varname>CapabilityBoundingSet=
</varname>). If the list of capabilities is prefixed with
<literal>~
</literal>,
383 all but the listed capabilities will be included, the effect of the assignment inverted. If the empty string is
384 assigned to this option, the ambient capability set is reset to the empty capability set, and all prior
385 settings have no effect. If set to
<literal>~
</literal> (without any further argument), the ambient capability
386 set is reset to the full set of available capabilities, also undoing any previous settings. Note that adding
387 capabilities to ambient capability set adds them to the process's inherited capability set.
</para><para>
388 Ambient capability sets are useful if you want to execute a process as a non-privileged user but still want to
389 give it some capabilities. Note that in this case option
<constant>keep-caps
</constant> is automatically added
390 to
<varname>SecureBits=
</varname> to retain the capabilities over the user
391 change.
<varname>AmbientCapabilities=
</varname> does not affect commands prefixed with
392 <literal>+
</literal>.
</para></listitem>
399 <title>Security
</title>
401 <variablelist class='unit-directives'
>
404 <term><varname>NoNewPrivileges=
</varname></term>
406 <listitem><para>Takes a boolean argument. If true, ensures that the service process and all its
407 children can never gain new privileges through
<function>execve()
</function> (e.g. via setuid or
408 setgid bits, or filesystem capabilities). This is the simplest and most effective way to ensure that
409 a process and its children can never elevate privileges again. Defaults to false, but certain
410 settings override this and ignore the value of this setting. This is the case when
411 <varname>SystemCallFilter=
</varname>,
<varname>SystemCallArchitectures=
</varname>,
412 <varname>RestrictAddressFamilies=
</varname>,
<varname>RestrictNamespaces=
</varname>,
413 <varname>PrivateDevices=
</varname>,
<varname>ProtectKernelTunables=
</varname>,
414 <varname>ProtectKernelModules=
</varname>,
<varname>ProtectKernelLogs=
</varname>,
415 <varname>ProtectClock=
</varname>,
<varname>MemoryDenyWriteExecute=
</varname>,
416 <varname>RestrictRealtime=
</varname>,
<varname>RestrictSUIDSGID=
</varname>,
<varname>DynamicUser=
</varname>
417 or
<varname>LockPersonality=
</varname> are specified. Note that even if this setting is overridden by them,
418 <command>systemctl show
</command> shows the original value of this setting.
419 Also see
<ulink url=
"https://www.kernel.org/doc/html/latest/userspace-api/no_new_privs.html">No New Privileges
420 Flag
</ulink>.
</para></listitem>
424 <term><varname>SecureBits=
</varname></term>
426 <listitem><para>Controls the secure bits set for the executed process. Takes a space-separated combination of
427 options from the following list:
<option>keep-caps
</option>,
<option>keep-caps-locked
</option>,
428 <option>no-setuid-fixup
</option>,
<option>no-setuid-fixup-locked
</option>,
<option>noroot
</option>, and
429 <option>noroot-locked
</option>. This option may appear more than once, in which case the secure bits are
430 ORed. If the empty string is assigned to this option, the bits are reset to
0. This does not affect commands
431 prefixed with
<literal>+
</literal>. See
<citerefentry
432 project='man-pages'
><refentrytitle>capabilities
</refentrytitle><manvolnum>7</manvolnum></citerefentry> for
433 details.
</para></listitem>
440 <title>Mandatory Access Control
</title>
442 <xi:include href=
"system-only.xml" xpointer=
"plural"/>
444 <variablelist class='unit-directives'
>
447 <term><varname>SELinuxContext=
</varname></term>
449 <listitem><para>Set the SELinux security context of the executed process. If set, this will override the
450 automated domain transition. However, the policy still needs to authorize the transition. This directive is
451 ignored if SELinux is disabled. If prefixed by
<literal>-
</literal>, all errors will be ignored. This does not
452 affect commands prefixed with
<literal>+
</literal>. See
<citerefentry
453 project='die-net'
><refentrytitle>setexeccon
</refentrytitle><manvolnum>3</manvolnum></citerefentry> for
454 details.
</para></listitem>
458 <term><varname>AppArmorProfile=
</varname></term>
460 <listitem><para>Takes a profile name as argument. The process executed by the unit will switch to this profile
461 when started. Profiles must already be loaded in the kernel, or the unit will fail. This result in a non
462 operation if AppArmor is not enabled. If prefixed by
<literal>-
</literal>, all errors will be ignored. This
463 does not affect commands prefixed with
<literal>+
</literal>.
</para></listitem>
467 <term><varname>SmackProcessLabel=
</varname></term>
469 <listitem><para>Takes a
<option>SMACK64
</option> security label as argument. The process executed by the unit
470 will be started under this label and SMACK will decide whether the process is allowed to run or not, based on
471 it. The process will continue to run under the label specified here unless the executable has its own
472 <option>SMACK64EXEC
</option> label, in which case the process will transition to run under that label. When not
473 specified, the label that systemd is running under is used. This directive is ignored if SMACK is
476 <para>The value may be prefixed by
<literal>-
</literal>, in which case all errors will be ignored. An empty
477 value may be specified to unset previous assignments. This does not affect commands prefixed with
478 <literal>+
</literal>.
</para></listitem>
485 <title>Process Properties
</title>
487 <variablelist class='unit-directives'
>
490 <term><varname>LimitCPU=
</varname></term>
491 <term><varname>LimitFSIZE=
</varname></term>
492 <term><varname>LimitDATA=
</varname></term>
493 <term><varname>LimitSTACK=
</varname></term>
494 <term><varname>LimitCORE=
</varname></term>
495 <term><varname>LimitRSS=
</varname></term>
496 <term><varname>LimitNOFILE=
</varname></term>
497 <term><varname>LimitAS=
</varname></term>
498 <term><varname>LimitNPROC=
</varname></term>
499 <term><varname>LimitMEMLOCK=
</varname></term>
500 <term><varname>LimitLOCKS=
</varname></term>
501 <term><varname>LimitSIGPENDING=
</varname></term>
502 <term><varname>LimitMSGQUEUE=
</varname></term>
503 <term><varname>LimitNICE=
</varname></term>
504 <term><varname>LimitRTPRIO=
</varname></term>
505 <term><varname>LimitRTTIME=
</varname></term>
507 <listitem><para>Set soft and hard limits on various resources for executed processes. See
508 <citerefentry><refentrytitle>setrlimit
</refentrytitle><manvolnum>2</manvolnum></citerefentry> for
509 details on the resource limit concept. Resource limits may be specified in two formats: either as
510 single value to set a specific soft and hard limit to the same value, or as colon-separated pair
511 <option>soft:hard
</option> to set both limits individually (e.g.
<literal>LimitAS=
4G:
16G
</literal>).
512 Use the string
<option>infinity
</option> to configure no limit on a specific resource. The
513 multiplicative suffixes K, M, G, T, P and E (to the base
1024) may be used for resource limits
514 measured in bytes (e.g.
<literal>LimitAS=
16G
</literal>). For the limits referring to time values, the
515 usual time units ms, s, min, h and so on may be used (see
516 <citerefentry><refentrytitle>systemd.time
</refentrytitle><manvolnum>7</manvolnum></citerefentry> for
517 details). Note that if no time unit is specified for
<varname>LimitCPU=
</varname> the default unit of
518 seconds is implied, while for
<varname>LimitRTTIME=
</varname> the default unit of microseconds is
519 implied. Also, note that the effective granularity of the limits might influence their
520 enforcement. For example, time limits specified for
<varname>LimitCPU=
</varname> will be rounded up
521 implicitly to multiples of
1s. For
<varname>LimitNICE=
</varname> the value may be specified in two
522 syntaxes: if prefixed with
<literal>+
</literal> or
<literal>-
</literal>, the value is understood as
523 regular Linux nice value in the range -
20.
.19. If not prefixed like this the value is understood as
524 raw resource limit parameter in the range
0.
.40 (with
0 being equivalent to
1).
</para>
526 <para>Note that most process resource limits configured with these options are per-process, and
527 processes may fork in order to acquire a new set of resources that are accounted independently of the
528 original process, and may thus escape limits set. Also note that
<varname>LimitRSS=
</varname> is not
529 implemented on Linux, and setting it has no effect. Often it is advisable to prefer the resource
531 <citerefentry><refentrytitle>systemd.resource-control
</refentrytitle><manvolnum>5</manvolnum></citerefentry>
532 over these per-process limits, as they apply to services as a whole, may be altered dynamically at
533 runtime, and are generally more expressive. For example,
<varname>MemoryMax=
</varname> is a more
534 powerful (and working) replacement for
<varname>LimitRSS=
</varname>.
</para>
536 <para>Resource limits not configured explicitly for a unit default to the value configured in the various
537 <varname>DefaultLimitCPU=
</varname>,
<varname>DefaultLimitFSIZE=
</varname>, … options available in
538 <citerefentry><refentrytitle>systemd-system.conf
</refentrytitle><manvolnum>5</manvolnum></citerefentry>, and –
539 if not configured there – the kernel or per-user defaults, as defined by the OS (the latter only for user
540 services, see below).
</para>
542 <para>For system units these resource limits may be chosen freely. When these settings are configured
543 in a user service (i.e. a service run by the per-user instance of the service manager) they cannot be
544 used to raise the limits above those set for the user manager itself when it was first invoked, as
545 the user's service manager generally lacks the privileges to do so. In user context these
546 configuration options are hence only useful to lower the limits passed in or to raise the soft limit
547 to the maximum of the hard limit as configured for the user. To raise the user's limits further, the
548 available configuration mechanisms differ between operating systems, but typically require
549 privileges. In most cases it is possible to configure higher per-user resource limits via PAM or by
550 setting limits on the system service encapsulating the user's service manager, i.e. the user's
551 instance of
<filename>user@.service
</filename>. After making such changes, make sure to restart the
552 user's service manager.
</para>
555 <title>Resource limit directives, their equivalent
<command>ulimit
</command> shell commands and the unit used
</title>
558 <colspec colname='directive'
/>
559 <colspec colname='equivalent'
/>
560 <colspec colname='unit'
/>
563 <entry>Directive
</entry>
564 <entry><command>ulimit
</command> equivalent
</entry>
570 <entry>LimitCPU=
</entry>
571 <entry>ulimit -t
</entry>
572 <entry>Seconds
</entry>
575 <entry>LimitFSIZE=
</entry>
576 <entry>ulimit -f
</entry>
580 <entry>LimitDATA=
</entry>
581 <entry>ulimit -d
</entry>
585 <entry>LimitSTACK=
</entry>
586 <entry>ulimit -s
</entry>
590 <entry>LimitCORE=
</entry>
591 <entry>ulimit -c
</entry>
595 <entry>LimitRSS=
</entry>
596 <entry>ulimit -m
</entry>
600 <entry>LimitNOFILE=
</entry>
601 <entry>ulimit -n
</entry>
602 <entry>Number of File Descriptors
</entry>
605 <entry>LimitAS=
</entry>
606 <entry>ulimit -v
</entry>
610 <entry>LimitNPROC=
</entry>
611 <entry>ulimit -u
</entry>
612 <entry>Number of Processes
</entry>
615 <entry>LimitMEMLOCK=
</entry>
616 <entry>ulimit -l
</entry>
620 <entry>LimitLOCKS=
</entry>
621 <entry>ulimit -x
</entry>
622 <entry>Number of Locks
</entry>
625 <entry>LimitSIGPENDING=
</entry>
626 <entry>ulimit -i
</entry>
627 <entry>Number of Queued Signals
</entry>
630 <entry>LimitMSGQUEUE=
</entry>
631 <entry>ulimit -q
</entry>
635 <entry>LimitNICE=
</entry>
636 <entry>ulimit -e
</entry>
637 <entry>Nice Level
</entry>
640 <entry>LimitRTPRIO=
</entry>
641 <entry>ulimit -r
</entry>
642 <entry>Realtime Priority
</entry>
645 <entry>LimitRTTIME=
</entry>
646 <entry>No equivalent
</entry>
647 <entry>Microseconds
</entry>
655 <term><varname>UMask=
</varname></term>
657 <listitem><para>Controls the file mode creation mask. Takes an access mode in octal notation. See
658 <citerefentry><refentrytitle>umask
</refentrytitle><manvolnum>2</manvolnum></citerefentry> for details. Defaults
659 to
0022.
</para></listitem>
663 <term><varname>KeyringMode=
</varname></term>
665 <listitem><para>Controls how the kernel session keyring is set up for the service (see
<citerefentry
666 project='man-pages'
><refentrytitle>session-keyring
</refentrytitle><manvolnum>7</manvolnum></citerefentry> for
667 details on the session keyring). Takes one of
<option>inherit
</option>,
<option>private
</option>,
668 <option>shared
</option>. If set to
<option>inherit
</option> no special keyring setup is done, and the kernel's
669 default behaviour is applied. If
<option>private
</option> is used a new session keyring is allocated when a
670 service process is invoked, and it is not linked up with any user keyring. This is the recommended setting for
671 system services, as this ensures that multiple services running under the same system user ID (in particular
672 the root user) do not share their key material among each other. If
<option>shared
</option> is used a new
673 session keyring is allocated as for
<option>private
</option>, but the user keyring of the user configured with
674 <varname>User=
</varname> is linked into it, so that keys assigned to the user may be requested by the unit's
675 processes. In this modes multiple units running processes under the same user ID may share key material. Unless
676 <option>inherit
</option> is selected the unique invocation ID for the unit (see below) is added as a protected
677 key by the name
<literal>invocation_id
</literal> to the newly created session keyring. Defaults to
678 <option>private
</option> for services of the system service manager and to
<option>inherit
</option> for
679 non-service units and for services of the user service manager.
</para></listitem>
683 <term><varname>OOMScoreAdjust=
</varname></term>
685 <listitem><para>Sets the adjustment value for the Linux kernel's Out-Of-Memory (OOM) killer score for
686 executed processes. Takes an integer between -
1000 (to disable OOM killing of processes of this unit)
687 and
1000 (to make killing of processes of this unit under memory pressure very likely). See
<ulink
688 url=
"https://www.kernel.org/doc/Documentation/filesystems/proc.txt">proc.txt
</ulink> for details. If
689 not specified defaults to the OOM score adjustment level of the service manager itself, which is
690 normally at
0.
</para>
692 <para>Use the
<varname>OOMPolicy=
</varname> setting of service units to configure how the service
693 manager shall react to the kernel OOM killer terminating a process of the service. See
694 <citerefentry><refentrytitle>systemd.service
</refentrytitle><manvolnum>5</manvolnum></citerefentry>
695 for details.
</para></listitem>
699 <term><varname>TimerSlackNSec=
</varname></term>
700 <listitem><para>Sets the timer slack in nanoseconds for the executed processes. The timer slack controls the
701 accuracy of wake-ups triggered by timers. See
702 <citerefentry><refentrytitle>prctl
</refentrytitle><manvolnum>2</manvolnum></citerefentry> for more
703 information. Note that in contrast to most other time span definitions this parameter takes an integer value in
704 nano-seconds if no unit is specified. The usual time units are understood too.
</para></listitem>
708 <term><varname>Personality=
</varname></term>
710 <listitem><para>Controls which kernel architecture
<citerefentry
711 project='man-pages'
><refentrytitle>uname
</refentrytitle><manvolnum>2</manvolnum></citerefentry> shall report,
712 when invoked by unit processes. Takes one of the architecture identifiers
<constant>x86
</constant>,
713 <constant>x86-
64</constant>,
<constant>ppc
</constant>,
<constant>ppc-le
</constant>,
<constant>ppc64
</constant>,
714 <constant>ppc64-le
</constant>,
<constant>s390
</constant> or
<constant>s390x
</constant>. Which personality
715 architectures are supported depends on the system architecture. Usually the
64bit versions of the various
716 system architectures support their immediate
32bit personality architecture counterpart, but no others. For
717 example,
<constant>x86-
64</constant> systems support the
<constant>x86-
64</constant> and
718 <constant>x86
</constant> personalities but no others. The personality feature is useful when running
32-bit
719 services on a
64-bit host system. If not specified, the personality is left unmodified and thus reflects the
720 personality of the host system's kernel.
</para></listitem>
724 <term><varname>IgnoreSIGPIPE=
</varname></term>
726 <listitem><para>Takes a boolean argument. If true, causes
<constant>SIGPIPE
</constant> to be ignored in the
727 executed process. Defaults to true because
<constant>SIGPIPE
</constant> generally is useful only in shell
728 pipelines.
</para></listitem>
735 <title>Scheduling
</title>
737 <variablelist class='unit-directives'
>
740 <term><varname>Nice=
</varname></term>
742 <listitem><para>Sets the default nice level (scheduling priority) for executed processes. Takes an integer
743 between -
20 (highest priority) and
19 (lowest priority). See
744 <citerefentry><refentrytitle>setpriority
</refentrytitle><manvolnum>2</manvolnum></citerefentry> for
745 details.
</para></listitem>
749 <term><varname>CPUSchedulingPolicy=
</varname></term>
751 <listitem><para>Sets the CPU scheduling policy for executed processes. Takes one of
<option>other
</option>,
752 <option>batch
</option>,
<option>idle
</option>,
<option>fifo
</option> or
<option>rr
</option>. See
753 <citerefentry><refentrytitle>sched_setscheduler
</refentrytitle><manvolnum>2</manvolnum></citerefentry> for
754 details.
</para></listitem>
758 <term><varname>CPUSchedulingPriority=
</varname></term>
760 <listitem><para>Sets the CPU scheduling priority for executed processes. The available priority range depends
761 on the selected CPU scheduling policy (see above). For real-time scheduling policies an integer between
1
762 (lowest priority) and
99 (highest priority) can be used. See
763 <citerefentry><refentrytitle>sched_setscheduler
</refentrytitle><manvolnum>2</manvolnum></citerefentry> for
764 details.
</para></listitem>
768 <term><varname>CPUSchedulingResetOnFork=
</varname></term>
770 <listitem><para>Takes a boolean argument. If true, elevated CPU scheduling priorities and policies will be
771 reset when the executed processes fork, and can hence not leak into child processes. See
772 <citerefentry><refentrytitle>sched_setscheduler
</refentrytitle><manvolnum>2</manvolnum></citerefentry> for
773 details. Defaults to false.
</para></listitem>
777 <term><varname>CPUAffinity=
</varname></term>
779 <listitem><para>Controls the CPU affinity of the executed processes. Takes a list of CPU indices or ranges
780 separated by either whitespace or commas. Alternatively, takes a special
"numa" value in which case systemd
781 automatically derives allowed CPU range based on the value of
<varname>NUMAMask=
</varname> option. CPU ranges
782 are specified by the lower and upper CPU indices separated by a dash. This option may be specified more than
783 once, in which case the specified CPU affinity masks are merged. If the empty string is assigned, the mask
784 is reset, all assignments prior to this will have no effect. See
785 <citerefentry><refentrytitle>sched_setaffinity
</refentrytitle><manvolnum>2</manvolnum></citerefentry> for
786 details.
</para></listitem>
790 <term><varname>NUMAPolicy=
</varname></term>
792 <listitem><para>Controls the NUMA memory policy of the executed processes. Takes a policy type, one of:
793 <option>default
</option>,
<option>preferred
</option>,
<option>bind
</option>,
<option>interleave
</option> and
794 <option>local
</option>. A list of NUMA nodes that should be associated with the policy must be specified
795 in
<varname>NUMAMask=
</varname>. For more details on each policy please see,
796 <citerefentry><refentrytitle>set_mempolicy
</refentrytitle><manvolnum>2</manvolnum></citerefentry>. For overall
797 overview of NUMA support in Linux see,
798 <citerefentry><refentrytitle>numa
</refentrytitle><manvolnum>7</manvolnum></citerefentry>
803 <term><varname>NUMAMask=
</varname></term>
805 <listitem><para>Controls the NUMA node list which will be applied alongside with selected NUMA policy.
806 Takes a list of NUMA nodes and has the same syntax as a list of CPUs for
<varname>CPUAffinity=
</varname>
807 option. Note that the list of NUMA nodes is not required for
<option>default
</option> and
<option>local
</option>
808 policies and for
<option>preferred
</option> policy we expect a single NUMA node.
</para></listitem>
812 <term><varname>IOSchedulingClass=
</varname></term>
814 <listitem><para>Sets the I/O scheduling class for executed processes. Takes an integer between
0 and
3 or one
815 of the strings
<option>none
</option>,
<option>realtime
</option>,
<option>best-effort
</option> or
816 <option>idle
</option>. If the empty string is assigned to this option, all prior assignments to both
817 <varname>IOSchedulingClass=
</varname> and
<varname>IOSchedulingPriority=
</varname> have no effect. See
818 <citerefentry><refentrytitle>ioprio_set
</refentrytitle><manvolnum>2</manvolnum></citerefentry> for
819 details.
</para></listitem>
823 <term><varname>IOSchedulingPriority=
</varname></term>
825 <listitem><para>Sets the I/O scheduling priority for executed processes. Takes an integer between
0 (highest
826 priority) and
7 (lowest priority). The available priorities depend on the selected I/O scheduling class (see
827 above). If the empty string is assigned to this option, all prior assignments to both
828 <varname>IOSchedulingClass=
</varname> and
<varname>IOSchedulingPriority=
</varname> have no effect.
829 See
<citerefentry><refentrytitle>ioprio_set
</refentrytitle><manvolnum>2</manvolnum></citerefentry> for
830 details.
</para></listitem>
837 <title>Sandboxing
</title>
839 <para>The following sandboxing options are an effective way to limit the exposure of the system towards the unit's
840 processes. It is recommended to turn on as many of these options for each unit as is possible without negatively
841 affecting the process' ability to operate. Note that many of these sandboxing features are gracefully turned off on
842 systems where the underlying security mechanism is not available. For example,
<varname>ProtectSystem=
</varname>
843 has no effect if the kernel is built without file system namespacing or if the service manager runs in a container
844 manager that makes file system namespacing unavailable to its payload. Similar,
845 <varname>RestrictRealtime=
</varname> has no effect on systems that lack support for SECCOMP system call filtering,
846 or in containers where support for this is turned off.
</para>
848 <para>Also note that some sandboxing functionality is generally not available in user services (i.e. services run
849 by the per-user service manager). Specifically, the various settings requiring file system namespacing support
850 (such as
<varname>ProtectSystem=
</varname>) are not available, as the underlying kernel functionality is only
851 accessible to privileged processes. However, most namespacing settings, that will not work on their own in user
852 services, will work when used in conjunction with
<varname>PrivateUsers=
</varname><option>true
</option>.
</para>
854 <variablelist class='unit-directives'
>
857 <term><varname>ProtectSystem=
</varname></term>
859 <listitem><para>Takes a boolean argument or the special values
<literal>full
</literal> or
860 <literal>strict
</literal>. If true, mounts the
<filename>/usr
</filename> and the boot loader
861 directories (
<filename>/boot
</filename> and
<filename>/efi
</filename>) read-only for processes
862 invoked by this unit. If set to
<literal>full
</literal>, the
<filename>/etc
</filename> directory is
863 mounted read-only, too. If set to
<literal>strict
</literal> the entire file system hierarchy is
864 mounted read-only, except for the API file system subtrees
<filename>/dev
</filename>,
865 <filename>/proc
</filename> and
<filename>/sys
</filename> (protect these directories using
866 <varname>PrivateDevices=
</varname>,
<varname>ProtectKernelTunables=
</varname>,
867 <varname>ProtectControlGroups=
</varname>). This setting ensures that any modification of the vendor-supplied
868 operating system (and optionally its configuration, and local mounts) is prohibited for the service. It is
869 recommended to enable this setting for all long-running services, unless they are involved with system updates
870 or need to modify the operating system in other ways. If this option is used,
871 <varname>ReadWritePaths=
</varname> may be used to exclude specific directories from being made read-only. This
872 setting is implied if
<varname>DynamicUser=
</varname> is set. This setting cannot ensure protection in all
873 cases. In general it has the same limitations as
<varname>ReadOnlyPaths=
</varname>, see below. Defaults to
874 off.
</para></listitem>
878 <term><varname>ProtectHome=
</varname></term>
880 <listitem><para>Takes a boolean argument or the special values
<literal>read-only
</literal> or
881 <literal>tmpfs
</literal>. If true, the directories
<filename>/home
</filename>,
882 <filename>/root
</filename>, and
<filename>/run/user
</filename> are made inaccessible and empty for
883 processes invoked by this unit. If set to
<literal>read-only
</literal>, the three directories are
884 made read-only instead. If set to
<literal>tmpfs
</literal>, temporary file systems are mounted on the
885 three directories in read-only mode. The value
<literal>tmpfs
</literal> is useful to hide home
886 directories not relevant to the processes invoked by the unit, while still allowing necessary
887 directories to be made visible when listed in
<varname>BindPaths=
</varname> or
888 <varname>BindReadOnlyPaths=
</varname>.
</para>
890 <para>Setting this to
<literal>yes
</literal> is mostly equivalent to set the three directories in
891 <varname>InaccessiblePaths=
</varname>. Similarly,
<literal>read-only
</literal> is mostly equivalent to
892 <varname>ReadOnlyPaths=
</varname>, and
<literal>tmpfs
</literal> is mostly equivalent to
893 <varname>TemporaryFileSystem=
</varname> with
<literal>:ro
</literal>.
</para>
895 <para>It is recommended to enable this setting for all long-running services (in particular
896 network-facing ones), to ensure they cannot get access to private user data, unless the services
897 actually require access to the user's private data. This setting is implied if
898 <varname>DynamicUser=
</varname> is set. This setting cannot ensure protection in all cases. In
899 general it has the same limitations as
<varname>ReadOnlyPaths=
</varname>, see below.
</para>
901 <xi:include href=
"system-only.xml" xpointer=
"singular"/></listitem>
905 <term><varname>RuntimeDirectory=
</varname></term>
906 <term><varname>StateDirectory=
</varname></term>
907 <term><varname>CacheDirectory=
</varname></term>
908 <term><varname>LogsDirectory=
</varname></term>
909 <term><varname>ConfigurationDirectory=
</varname></term>
911 <listitem><para>These options take a whitespace-separated list of directory names. The specified directory
912 names must be relative, and may not include
<literal>..
</literal>. If set, one or more
913 directories by the specified names will be created (including their parents) below the locations
914 defined in the following table, when the unit is started. Also, the corresponding environment variable
915 is defined with the full path of directories. If multiple directories are set, then in the environment variable
916 the paths are concatenated with colon (
<literal>:
</literal>).
</para>
918 <title>Automatic directory creation and environment variables
</title>
922 <entry>Directory
</entry>
923 <entry>Below path for system units
</entry>
924 <entry>Below path for user units
</entry>
925 <entry>Environment variable set
</entry>
930 <entry><varname>RuntimeDirectory=
</varname></entry>
931 <entry><filename>/run/
</filename></entry>
932 <entry><varname>$XDG_RUNTIME_DIR
</varname></entry>
933 <entry><varname>$RUNTIME_DIRECTORY
</varname></entry>
936 <entry><varname>StateDirectory=
</varname></entry>
937 <entry><filename>/var/lib/
</filename></entry>
938 <entry><varname>$XDG_CONFIG_HOME
</varname></entry>
939 <entry><varname>$STATE_DIRECTORY
</varname></entry>
942 <entry><varname>CacheDirectory=
</varname></entry>
943 <entry><filename>/var/cache/
</filename></entry>
944 <entry><varname>$XDG_CACHE_HOME
</varname></entry>
945 <entry><varname>$CACHE_DIRECTORY
</varname></entry>
948 <entry><varname>LogsDirectory=
</varname></entry>
949 <entry><filename>/var/log/
</filename></entry>
950 <entry><varname>$XDG_CONFIG_HOME
</varname><filename>/log/
</filename></entry>
951 <entry><varname>$LOGS_DIRECTORY
</varname></entry>
954 <entry><varname>ConfigurationDirectory=
</varname></entry>
955 <entry><filename>/etc/
</filename></entry>
956 <entry><varname>$XDG_CONFIG_HOME
</varname></entry>
957 <entry><varname>$CONFIGURATION_DIRECTORY
</varname></entry>
963 <para>In case of
<varname>RuntimeDirectory=
</varname> the innermost subdirectories are removed when
964 the unit is stopped. It is possible to preserve the specified directories in this case if
965 <varname>RuntimeDirectoryPreserve=
</varname> is configured to
<option>restart
</option> or
966 <option>yes
</option> (see below). The directories specified with
<varname>StateDirectory=
</varname>,
967 <varname>CacheDirectory=
</varname>,
<varname>LogsDirectory=
</varname>,
968 <varname>ConfigurationDirectory=
</varname> are not removed when the unit is stopped.
</para>
970 <para>Except in case of
<varname>ConfigurationDirectory=
</varname>, the innermost specified directories will be
971 owned by the user and group specified in
<varname>User=
</varname> and
<varname>Group=
</varname>. If the
972 specified directories already exist and their owning user or group do not match the configured ones, all files
973 and directories below the specified directories as well as the directories themselves will have their file
974 ownership recursively changed to match what is configured. As an optimization, if the specified directories are
975 already owned by the right user and group, files and directories below of them are left as-is, even if they do
976 not match what is requested. The innermost specified directories will have their access mode adjusted to the
977 what is specified in
<varname>RuntimeDirectoryMode=
</varname>,
<varname>StateDirectoryMode=
</varname>,
978 <varname>CacheDirectoryMode=
</varname>,
<varname>LogsDirectoryMode=
</varname> and
979 <varname>ConfigurationDirectoryMode=
</varname>.
</para>
981 <para>These options imply
<varname>BindPaths=
</varname> for the specified paths. When combined with
982 <varname>RootDirectory=
</varname> or
<varname>RootImage=
</varname> these paths always reside on the host and
983 are mounted from there into the unit's file system namespace.
</para>
985 <para>If
<varname>DynamicUser=
</varname> is used in conjunction with
<varname>StateDirectory=
</varname>,
986 <varname>CacheDirectory=
</varname> and
<varname>LogsDirectory=
</varname> is slightly altered: the directories
987 are created below
<filename>/var/lib/private
</filename>,
<filename>/var/cache/private
</filename> and
988 <filename>/var/log/private
</filename>, respectively, which are host directories made inaccessible to
989 unprivileged users, which ensures that access to these directories cannot be gained through dynamic user ID
990 recycling. Symbolic links are created to hide this difference in behaviour. Both from perspective of the host
991 and from inside the unit, the relevant directories hence always appear directly below
992 <filename>/var/lib
</filename>,
<filename>/var/cache
</filename> and
<filename>/var/log
</filename>.
</para>
994 <para>Use
<varname>RuntimeDirectory=
</varname> to manage one or more runtime directories for the unit and bind
995 their lifetime to the daemon runtime. This is particularly useful for unprivileged daemons that cannot create
996 runtime directories in
<filename>/run
</filename> due to lack of privileges, and to make sure the runtime
997 directory is cleaned up automatically after use. For runtime directories that require more complex or different
998 configuration or lifetime guarantees, please consider using
999 <citerefentry><refentrytitle>tmpfiles.d
</refentrytitle><manvolnum>5</manvolnum></citerefentry>.
</para>
1001 <para>The directories defined by these options are always created under the standard paths used by systemd
1002 (
<filename>/var
</filename>,
<filename>/run
</filename>,
<filename>/etc
</filename>, …). If the service needs
1003 directories in a different location, a different mechanism has to be used to create them.
</para>
1005 <para><citerefentry><refentrytitle>tmpfiles.d
</refentrytitle><manvolnum>5</manvolnum></citerefentry> provides
1006 functionality that overlaps with these options. Using these options is recommended, because the lifetime of
1007 the directories is tied directly to the lifetime of the unit, and it is not necessary to ensure that the
1008 <filename>tmpfiles.d
</filename> configuration is executed before the unit is started.
</para>
1010 <para>To remove any of the directories created by these settings, use the
<command>systemctl clean
1011 …
</command> command on the relevant units, see
1012 <citerefentry><refentrytitle>systemctl
</refentrytitle><manvolnum>1</manvolnum></citerefentry> for
1015 <para>Example: if a system service unit has the following,
1016 <programlisting>RuntimeDirectory=foo/bar baz
</programlisting>
1017 the service manager creates
<filename>/run/foo
</filename> (if it does not exist),
1019 <filename index='false'
>/run/foo/bar
</filename>, and
<filename index='false'
>/run/baz
</filename>. The
1020 directories
<filename index='false'
>/run/foo/bar
</filename> and
1021 <filename index='false'
>/run/baz
</filename> except
<filename index='false'
>/run/foo
</filename> are
1022 owned by the user and group specified in
<varname>User=
</varname> and
<varname>Group=
</varname>, and removed
1023 when the service is stopped.
</para>
1025 <para>Example: if a system service unit has the following,
1026 <programlisting>RuntimeDirectory=foo/bar
1027 StateDirectory=aaa/bbb ccc
</programlisting>
1028 then the environment variable
<literal>RUNTIME_DIRECTORY
</literal> is set with
<literal>/run/foo/bar
</literal>, and
1029 <literal>STATE_DIRECTORY
</literal> is set with
<literal>/var/lib/aaa/bbb:/var/lib/ccc
</literal>.
</para></listitem>
1033 <term><varname>RuntimeDirectoryMode=
</varname></term>
1034 <term><varname>StateDirectoryMode=
</varname></term>
1035 <term><varname>CacheDirectoryMode=
</varname></term>
1036 <term><varname>LogsDirectoryMode=
</varname></term>
1037 <term><varname>ConfigurationDirectoryMode=
</varname></term>
1039 <listitem><para>Specifies the access mode of the directories specified in
<varname>RuntimeDirectory=
</varname>,
1040 <varname>StateDirectory=
</varname>,
<varname>CacheDirectory=
</varname>,
<varname>LogsDirectory=
</varname>, or
1041 <varname>ConfigurationDirectory=
</varname>, respectively, as an octal number. Defaults to
1042 <constant>0755</constant>. See
"Permissions" in
<citerefentry
1043 project='man-pages'
><refentrytitle>path_resolution
</refentrytitle><manvolnum>7</manvolnum></citerefentry> for a
1044 discussion of the meaning of permission bits.
</para></listitem>
1048 <term><varname>RuntimeDirectoryPreserve=
</varname></term>
1050 <listitem><para>Takes a boolean argument or
<option>restart
</option>. If set to
<option>no
</option> (the
1051 default), the directories specified in
<varname>RuntimeDirectory=
</varname> are always removed when the service
1052 stops. If set to
<option>restart
</option> the directories are preserved when the service is both automatically
1053 and manually restarted. Here, the automatic restart means the operation specified in
1054 <varname>Restart=
</varname>, and manual restart means the one triggered by
<command>systemctl restart
1055 foo.service
</command>. If set to
<option>yes
</option>, then the directories are not removed when the service is
1056 stopped. Note that since the runtime directory
<filename>/run
</filename> is a mount point of
1057 <literal>tmpfs
</literal>, then for system services the directories specified in
1058 <varname>RuntimeDirectory=
</varname> are removed when the system is rebooted.
</para></listitem>
1062 <term><varname>TimeoutCleanSec=
</varname></term>
1063 <listitem><para>Configures a timeout on the clean-up operation requested through
<command>systemctl
1064 clean …
</command>, see
1065 <citerefentry><refentrytitle>systemctl
</refentrytitle><manvolnum>1</manvolnum></citerefentry> for
1066 details. Takes the usual time values and defaults to
<constant>infinity
</constant>, i.e. by default
1067 no time-out is applied. If a time-out is configured the clean operation will be aborted forcibly when
1068 the time-out is reached, potentially leaving resources on disk.
</para></listitem>
1072 <term><varname>ReadWritePaths=
</varname></term>
1073 <term><varname>ReadOnlyPaths=
</varname></term>
1074 <term><varname>InaccessiblePaths=
</varname></term>
1076 <listitem><para>Sets up a new file system namespace for executed processes. These options may be used to limit
1077 access a process might have to the file system hierarchy. Each setting takes a space-separated list of paths
1078 relative to the host's root directory (i.e. the system running the service manager). Note that if paths
1079 contain symlinks, they are resolved relative to the root directory set with
1080 <varname>RootDirectory=
</varname>/
<varname>RootImage=
</varname>.
</para>
1082 <para>Paths listed in
<varname>ReadWritePaths=
</varname> are accessible from within the namespace with the same
1083 access modes as from outside of it. Paths listed in
<varname>ReadOnlyPaths=
</varname> are accessible for
1084 reading only, writing will be refused even if the usual file access controls would permit this. Nest
1085 <varname>ReadWritePaths=
</varname> inside of
<varname>ReadOnlyPaths=
</varname> in order to provide writable
1086 subdirectories within read-only directories. Use
<varname>ReadWritePaths=
</varname> in order to whitelist
1087 specific paths for write access if
<varname>ProtectSystem=strict
</varname> is used.
</para>
1089 <para>Paths listed in
<varname>InaccessiblePaths=
</varname> will be made inaccessible for processes inside
1090 the namespace along with everything below them in the file system hierarchy. This may be more restrictive than
1091 desired, because it is not possible to nest
<varname>ReadWritePaths=
</varname>,
<varname>ReadOnlyPaths=
</varname>,
1092 <varname>BindPaths=
</varname>, or
<varname>BindReadOnlyPaths=
</varname> inside it. For a more flexible option,
1093 see
<varname>TemporaryFileSystem=
</varname>.
</para>
1095 <para>Non-directory paths may be specified as well. These options may be specified more than once,
1096 in which case all paths listed will have limited access from within the namespace. If the empty string is
1097 assigned to this option, the specific list is reset, and all prior assignments have no effect.
</para>
1099 <para>Paths in
<varname>ReadWritePaths=
</varname>,
<varname>ReadOnlyPaths=
</varname> and
1100 <varname>InaccessiblePaths=
</varname> may be prefixed with
<literal>-
</literal>, in which case they will be
1101 ignored when they do not exist. If prefixed with
<literal>+
</literal> the paths are taken relative to the root
1102 directory of the unit, as configured with
<varname>RootDirectory=
</varname>/
<varname>RootImage=
</varname>,
1103 instead of relative to the root directory of the host (see above). When combining
<literal>-
</literal> and
1104 <literal>+
</literal> on the same path make sure to specify
<literal>-
</literal> first, and
<literal>+
</literal>
1107 <para>Note that these settings will disconnect propagation of mounts from the unit's processes to the
1108 host. This means that this setting may not be used for services which shall be able to install mount points in
1109 the main mount namespace. For
<varname>ReadWritePaths=
</varname> and
<varname>ReadOnlyPaths=
</varname>
1110 propagation in the other direction is not affected, i.e. mounts created on the host generally appear in the
1111 unit processes' namespace, and mounts removed on the host also disappear there too. In particular, note that
1112 mount propagation from host to unit will result in unmodified mounts to be created in the unit's namespace,
1113 i.e. writable mounts appearing on the host will be writable in the unit's namespace too, even when propagated
1114 below a path marked with
<varname>ReadOnlyPaths=
</varname>! Restricting access with these options hence does
1115 not extend to submounts of a directory that are created later on. This means the lock-down offered by that
1116 setting is not complete, and does not offer full protection.
</para>
1118 <para>Note that the effect of these settings may be undone by privileged processes. In order to set up an
1119 effective sandboxed environment for a unit it is thus recommended to combine these settings with either
1120 <varname>CapabilityBoundingSet=~CAP_SYS_ADMIN
</varname> or
1121 <varname>SystemCallFilter=~@mount
</varname>.
</para>
1123 <xi:include href=
"system-only.xml" xpointer=
"plural"/></listitem>
1127 <term><varname>TemporaryFileSystem=
</varname></term>
1129 <listitem><para>Takes a space-separated list of mount points for temporary file systems (tmpfs). If set, a new file
1130 system namespace is set up for executed processes, and a temporary file system is mounted on each mount point.
1131 This option may be specified more than once, in which case temporary file systems are mounted on all listed mount
1132 points. If the empty string is assigned to this option, the list is reset, and all prior assignments have no effect.
1133 Each mount point may optionally be suffixed with a colon (
<literal>:
</literal>) and mount options such as
1134 <literal>size=
10%
</literal> or
<literal>ro
</literal>. By default, each temporary file system is mounted
1135 with
<literal>nodev,strictatime,mode=
0755</literal>. These can be disabled by explicitly specifying the corresponding
1136 mount options, e.g.,
<literal>dev
</literal> or
<literal>nostrictatime
</literal>.
</para>
1138 <para>This is useful to hide files or directories not relevant to the processes invoked by the unit, while necessary
1139 files or directories can be still accessed by combining with
<varname>BindPaths=
</varname> or
1140 <varname>BindReadOnlyPaths=
</varname>:
</para>
1142 <para>Example: if a unit has the following,
1143 <programlisting>TemporaryFileSystem=/var:ro
1144 BindReadOnlyPaths=/var/lib/systemd
</programlisting>
1145 then the invoked processes by the unit cannot see any files or directories under
<filename>/var
</filename> except for
1146 <filename>/var/lib/systemd
</filename> or its contents.
</para>
1148 <xi:include href=
"system-only.xml" xpointer=
"singular"/></listitem>
1152 <term><varname>PrivateTmp=
</varname></term>
1154 <listitem><para>Takes a boolean argument. If true, sets up a new file system namespace for the executed
1155 processes and mounts private
<filename>/tmp
</filename> and
<filename>/var/tmp
</filename> directories inside it
1156 that is not shared by processes outside of the namespace. This is useful to secure access to temporary files of
1157 the process, but makes sharing between processes via
<filename>/tmp
</filename> or
<filename>/var/tmp
</filename>
1158 impossible. If this is enabled, all temporary files created by a service in these directories will be removed
1159 after the service is stopped. Defaults to false. It is possible to run two or more units within the same
1160 private
<filename>/tmp
</filename> and
<filename>/var/tmp
</filename> namespace by using the
1161 <varname>JoinsNamespaceOf=
</varname> directive, see
1162 <citerefentry><refentrytitle>systemd.unit
</refentrytitle><manvolnum>5</manvolnum></citerefentry> for
1163 details. This setting is implied if
<varname>DynamicUser=
</varname> is set. For this setting the same
1164 restrictions regarding mount propagation and privileges apply as for
<varname>ReadOnlyPaths=
</varname> and
1165 related calls, see above. Enabling this setting has the side effect of adding
<varname>Requires=
</varname> and
1166 <varname>After=
</varname> dependencies on all mount units necessary to access
<filename>/tmp
</filename> and
1167 <filename>/var/tmp
</filename>. Moreover an implicitly
<varname>After=
</varname> ordering on
1168 <citerefentry><refentrytitle>systemd-tmpfiles-setup.service
</refentrytitle><manvolnum>8</manvolnum></citerefentry>
1171 <para>Note that the implementation of this setting might be impossible (for example if mount namespaces are not
1172 available), and the unit should be written in a way that does not solely rely on this setting for
1175 <xi:include href=
"system-only.xml" xpointer=
"singular"/></listitem>
1179 <term><varname>PrivateDevices=
</varname></term>
1181 <listitem><para>Takes a boolean argument. If true, sets up a new
<filename>/dev
</filename> mount for the
1182 executed processes and only adds API pseudo devices such as
<filename>/dev/null
</filename>,
1183 <filename>/dev/zero
</filename> or
<filename>/dev/random
</filename> (as well as the pseudo TTY subsystem) to it,
1184 but no physical devices such as
<filename>/dev/sda
</filename>, system memory
<filename>/dev/mem
</filename>,
1185 system ports
<filename>/dev/port
</filename> and others. This is useful to securely turn off physical device
1186 access by the executed process. Defaults to false. Enabling this option will install a system call filter to
1187 block low-level I/O system calls that are grouped in the
<varname>@raw-io
</varname> set, will also remove
1188 <constant>CAP_MKNOD
</constant> and
<constant>CAP_SYS_RAWIO
</constant> from the capability bounding set for the
1189 unit (see above), and set
<varname>DevicePolicy=closed
</varname> (see
1190 <citerefentry><refentrytitle>systemd.resource-control
</refentrytitle><manvolnum>5</manvolnum></citerefentry>
1191 for details). Note that using this setting will disconnect propagation of mounts from the service to the host
1192 (propagation in the opposite direction continues to work). This means that this setting may not be used for
1193 services which shall be able to install mount points in the main mount namespace. The new
1194 <filename>/dev
</filename> will be mounted read-only and 'noexec'. The latter may break old programs which try
1195 to set up executable memory by using
1196 <citerefentry><refentrytitle>mmap
</refentrytitle><manvolnum>2</manvolnum></citerefentry> of
1197 <filename>/dev/zero
</filename> instead of using
<constant>MAP_ANON
</constant>. For this setting the same
1198 restrictions regarding mount propagation and privileges apply as for
<varname>ReadOnlyPaths=
</varname> and
1199 related calls, see above. If turned on and if running in user mode, or in system mode, but without the
1200 <constant>CAP_SYS_ADMIN
</constant> capability (e.g. setting
<varname>User=
</varname>),
1201 <varname>NoNewPrivileges=yes
</varname> is implied.
</para>
1203 <para>Note that the implementation of this setting might be impossible (for example if mount namespaces are not
1204 available), and the unit should be written in a way that does not solely rely on this setting for
1207 <xi:include href=
"system-only.xml" xpointer=
"singular"/></listitem>
1211 <term><varname>PrivateNetwork=
</varname></term>
1213 <listitem><para>Takes a boolean argument. If true, sets up a new network namespace for the executed processes
1214 and configures only the loopback network device
<literal>lo
</literal> inside it. No other network devices will
1215 be available to the executed process. This is useful to turn off network access by the executed process.
1216 Defaults to false. It is possible to run two or more units within the same private network namespace by using
1217 the
<varname>JoinsNamespaceOf=
</varname> directive, see
1218 <citerefentry><refentrytitle>systemd.unit
</refentrytitle><manvolnum>5</manvolnum></citerefentry> for
1219 details. Note that this option will disconnect all socket families from the host, including
1220 <constant>AF_NETLINK
</constant> and
<constant>AF_UNIX
</constant>. Effectively, for
1221 <constant>AF_NETLINK
</constant> this means that device configuration events received from
1222 <citerefentry><refentrytitle>systemd-udevd.service
</refentrytitle><manvolnum>8</manvolnum></citerefentry> are
1223 not delivered to the unit's processes. And for
<constant>AF_UNIX
</constant> this has the effect that
1224 <constant>AF_UNIX
</constant> sockets in the abstract socket namespace of the host will become unavailable to
1225 the unit's processes (however, those located in the file system will continue to be accessible).
</para>
1227 <para>Note that the implementation of this setting might be impossible (for example if network namespaces are
1228 not available), and the unit should be written in a way that does not solely rely on this setting for
1231 <para>When this option is used on a socket unit any sockets bound on behalf of this unit will be
1232 bound within a private network namespace. This may be combined with
1233 <varname>JoinsNamespaceOf=
</varname> to listen on sockets inside of network namespaces of other
1236 <xi:include href=
"system-only.xml" xpointer=
"singular"/></listitem>
1240 <term><varname>NetworkNamespacePath=
</varname></term>
1242 <listitem><para>Takes an absolute file system path refererring to a Linux network namespace
1243 pseudo-file (i.e. a file like
<filename>/proc/$PID/ns/net
</filename> or a bind mount or symlink to
1244 one). When set the invoked processes are added to the network namespace referenced by that path. The
1245 path has to point to a valid namespace file at the moment the processes are forked off. If this
1246 option is used
<varname>PrivateNetwork=
</varname> has no effect. If this option is used together with
1247 <varname>JoinsNamespaceOf=
</varname> then it only has an effect if this unit is started before any of
1248 the listed units that have
<varname>PrivateNetwork=
</varname> or
1249 <varname>NetworkNamespacePath=
</varname> configured, as otherwise the network namespace of those
1250 units is reused.
</para>
1252 <para>When this option is used on a socket unit any sockets bound on behalf of this unit will be
1253 bound within the specified network namespace.
</para>
1255 <xi:include href=
"system-only.xml" xpointer=
"singular"/></listitem>
1259 <term><varname>PrivateUsers=
</varname></term>
1261 <listitem><para>Takes a boolean argument. If true, sets up a new user namespace for the executed processes and
1262 configures a minimal user and group mapping, that maps the
<literal>root
</literal> user and group as well as
1263 the unit's own user and group to themselves and everything else to the
<literal>nobody
</literal> user and
1264 group. This is useful to securely detach the user and group databases used by the unit from the rest of the
1265 system, and thus to create an effective sandbox environment. All files, directories, processes, IPC objects and
1266 other resources owned by users/groups not equaling
<literal>root
</literal> or the unit's own will stay visible
1267 from within the unit but appear owned by the
<literal>nobody
</literal> user and group. If this mode is enabled,
1268 all unit processes are run without privileges in the host user namespace (regardless if the unit's own
1269 user/group is
<literal>root
</literal> or not). Specifically this means that the process will have zero process
1270 capabilities on the host's user namespace, but full capabilities within the service's user namespace. Settings
1271 such as
<varname>CapabilityBoundingSet=
</varname> will affect only the latter, and there's no way to acquire
1272 additional capabilities in the host's user namespace. Defaults to off.
</para>
1274 <para>When this setting is set up by a per-user instance of the service manager, the mapping of the
1275 <literal>root
</literal> user and group to itself is omitted (unless the user manager is root).
1276 Additionally, in the per-user instance manager case, the
1277 user namespace will be set up before most other namespaces. This means that combining
1278 <varname>PrivateUsers=
</varname><option>true
</option> with other namespaces will enable use of features not
1279 normally supported by the per-user instances of the service manager.
</para>
1281 <para>This setting is particularly useful in conjunction with
1282 <varname>RootDirectory=
</varname>/
<varname>RootImage=
</varname>, as the need to synchronize the user and group
1283 databases in the root directory and on the host is reduced, as the only users and groups who need to be matched
1284 are
<literal>root
</literal>,
<literal>nobody
</literal> and the unit's own user and group.
</para>
1286 <para>Note that the implementation of this setting might be impossible (for example if user namespaces are not
1287 available), and the unit should be written in a way that does not solely rely on this setting for
1288 security.
</para></listitem>
1292 <term><varname>ProtectHostname=
</varname></term>
1294 <listitem><para>Takes a boolean argument. When set, sets up a new UTS namespace for the executed
1295 processes. In addition, changing hostname or domainname is prevented. Defaults to off.
</para>
1297 <para>Note that the implementation of this setting might be impossible (for example if UTS namespaces
1298 are not available), and the unit should be written in a way that does not solely rely on this setting
1299 for security.
</para>
1301 <para>Note that when this option is enabled for a service hostname changes no longer propagate from
1302 the system into the service, it is hence not suitable for services that need to take notice of system
1303 hostname changes dynamically.
</para>
1305 <xi:include href=
"system-only.xml" xpointer=
"singular"/></listitem>
1309 <term><varname>ProtectClock=
</varname></term>
1311 <listitem><para>Takes a boolean argument. If set, writes to the hardware clock or system clock will be denied.
1312 It is recommended to turn this on for most services that do not need modify the clock. Defaults to off. Enabling
1313 this option removes
<constant>CAP_SYS_TIME
</constant> and
<constant>CAP_WAKE_ALARM
</constant> from the
1314 capability bounding set for this unit, installs a system call filter to block calls that can set the
1315 clock, and
<varname>DeviceAllow=char-rtc r
</varname> is implied. This ensures
<filename>/dev/rtc0
</filename>,
1316 <filename>/dev/rtc1
</filename>, etc are made read only to the service. See
1317 <citerefentry><refentrytitle>systemd.resource-control
</refentrytitle><manvolnum>5</manvolnum></citerefentry>
1318 for the details about
<varname>DeviceAllow=
</varname>.
</para>
1320 <xi:include href=
"system-only.xml" xpointer=
"singular"/></listitem>
1324 <term><varname>ProtectKernelTunables=
</varname></term>
1326 <listitem><para>Takes a boolean argument. If true, kernel variables accessible through
1327 <filename>/proc/sys
</filename>,
<filename>/sys
</filename>,
<filename>/proc/sysrq-trigger
</filename>,
1328 <filename>/proc/latency_stats
</filename>,
<filename>/proc/acpi
</filename>,
1329 <filename>/proc/timer_stats
</filename>,
<filename>/proc/fs
</filename> and
<filename>/proc/irq
</filename> will
1330 be made read-only to all processes of the unit. Usually, tunable kernel variables should be initialized only at
1331 boot-time, for example with the
1332 <citerefentry><refentrytitle>sysctl.d
</refentrytitle><manvolnum>5</manvolnum></citerefentry> mechanism. Few
1333 services need to write to these at runtime; it is hence recommended to turn this on for most services. For this
1334 setting the same restrictions regarding mount propagation and privileges apply as for
1335 <varname>ReadOnlyPaths=
</varname> and related calls, see above. Defaults to off. If turned on and if running
1336 in user mode, or in system mode, but without the
<constant>CAP_SYS_ADMIN
</constant> capability (e.g. services
1337 for which
<varname>User=
</varname> is set),
<varname>NoNewPrivileges=yes
</varname> is implied. Note that this
1338 option does not prevent indirect changes to kernel tunables effected by IPC calls to other processes. However,
1339 <varname>InaccessiblePaths=
</varname> may be used to make relevant IPC file system objects inaccessible. If
1340 <varname>ProtectKernelTunables=
</varname> is set,
<varname>MountAPIVFS=yes
</varname> is
1343 <xi:include href=
"system-only.xml" xpointer=
"singular"/></listitem>
1347 <term><varname>ProtectKernelModules=
</varname></term>
1349 <listitem><para>Takes a boolean argument. If true, explicit module loading will be denied. This allows
1350 module load and unload operations to be turned off on modular kernels. It is recommended to turn this on for most services
1351 that do not need special file systems or extra kernel modules to work. Defaults to off. Enabling this option
1352 removes
<constant>CAP_SYS_MODULE
</constant> from the capability bounding set for the unit, and installs a
1353 system call filter to block module system calls, also
<filename>/usr/lib/modules
</filename> is made
1354 inaccessible. For this setting the same restrictions regarding mount propagation and privileges apply as for
1355 <varname>ReadOnlyPaths=
</varname> and related calls, see above. Note that limited automatic module loading due
1356 to user configuration or kernel mapping tables might still happen as side effect of requested user operations,
1357 both privileged and unprivileged. To disable module auto-load feature please see
1358 <citerefentry><refentrytitle>sysctl.d
</refentrytitle><manvolnum>5</manvolnum></citerefentry>
1359 <constant>kernel.modules_disabled
</constant> mechanism and
1360 <filename>/proc/sys/kernel/modules_disabled
</filename> documentation. If turned on and if running in user
1361 mode, or in system mode, but without the
<constant>CAP_SYS_ADMIN
</constant> capability (e.g. setting
1362 <varname>User=
</varname>),
<varname>NoNewPrivileges=yes
</varname> is implied.
</para>
1364 <xi:include href=
"system-only.xml" xpointer=
"singular"/></listitem>
1368 <term><varname>ProtectKernelLogs=
</varname></term>
1370 <listitem><para>Takes a boolean argument. If true, access to the kernel log ring buffer will be denied. It is
1371 recommended to turn this on for most services that do not need to read from or write to the kernel log ring
1372 buffer. Enabling this option removes
<constant>CAP_SYSLOG
</constant> from the capability bounding set for this
1373 unit, and installs a system call filter to block the
1374 <citerefentry project='man-pages'
><refentrytitle>syslog
</refentrytitle><manvolnum>2</manvolnum></citerefentry>
1375 system call (not to be confused with the libc API
1376 <citerefentry project='man-pages'
><refentrytitle>syslog
</refentrytitle><manvolnum>3</manvolnum></citerefentry>
1377 for userspace logging). The kernel exposes its log buffer to userspace via
<filename>/dev/kmsg
</filename> and
1378 <filename>/proc/kmsg
</filename>. If enabled, these are made inaccessible to all the processes in the unit.
</para>
1380 <xi:include href=
"system-only.xml" xpointer=
"singular"/></listitem>
1384 <term><varname>ProtectControlGroups=
</varname></term>
1386 <listitem><para>Takes a boolean argument. If true, the Linux Control Groups (
<citerefentry
1387 project='man-pages'
><refentrytitle>cgroups
</refentrytitle><manvolnum>7</manvolnum></citerefentry>) hierarchies
1388 accessible through
<filename>/sys/fs/cgroup
</filename> will be made read-only to all processes of the
1389 unit. Except for container managers no services should require write access to the control groups hierarchies;
1390 it is hence recommended to turn this on for most services. For this setting the same restrictions regarding
1391 mount propagation and privileges apply as for
<varname>ReadOnlyPaths=
</varname> and related calls, see
1392 above. Defaults to off. If
<varname>ProtectControlGroups=
</varname> is set,
<varname>MountAPIVFS=yes
</varname>
1395 <xi:include href=
"system-only.xml" xpointer=
"singular"/></listitem>
1399 <term><varname>RestrictAddressFamilies=
</varname></term>
1401 <listitem><para>Restricts the set of socket address families accessible to the processes of this unit. Takes a
1402 space-separated list of address family names to whitelist, such as
<constant>AF_UNIX
</constant>,
1403 <constant>AF_INET
</constant> or
<constant>AF_INET6
</constant>. When prefixed with
<constant>~
</constant> the
1404 listed address families will be applied as blacklist, otherwise as whitelist. Note that this restricts access
1405 to the
<citerefentry
1406 project='man-pages'
><refentrytitle>socket
</refentrytitle><manvolnum>2</manvolnum></citerefentry> system call
1407 only. Sockets passed into the process by other means (for example, by using socket activation with socket
1408 units, see
<citerefentry><refentrytitle>systemd.socket
</refentrytitle><manvolnum>5</manvolnum></citerefentry>)
1409 are unaffected. Also, sockets created with
<function>socketpair()
</function> (which creates connected AF_UNIX
1410 sockets only) are unaffected. Note that this option has no effect on
32-bit x86, s390, s390x, mips, mips-le,
1411 ppc, ppc-le, pcc64, ppc64-le and is ignored (but works correctly on other ABIs, including x86-
64). Note that on
1412 systems supporting multiple ABIs (such as x86/x86-
64) it is recommended to turn off alternative ABIs for
1413 services, so that they cannot be used to circumvent the restrictions of this option. Specifically, it is
1414 recommended to combine this option with
<varname>SystemCallArchitectures=native
</varname> or similar. If
1415 running in user mode, or in system mode, but without the
<constant>CAP_SYS_ADMIN
</constant> capability
1416 (e.g. setting
<varname>User=nobody
</varname>),
<varname>NoNewPrivileges=yes
</varname> is implied. By default,
1417 no restrictions apply, all address families are accessible to processes. If assigned the empty string, any
1418 previous address family restriction changes are undone. This setting does not affect commands prefixed with
1419 <literal>+
</literal>.
</para>
1421 <para>Use this option to limit exposure of processes to remote access, in particular via exotic and sensitive
1422 network protocols, such as
<constant>AF_PACKET
</constant>. Note that in most cases, the local
1423 <constant>AF_UNIX
</constant> address family should be included in the configured whitelist as it is frequently
1424 used for local communication, including for
1425 <citerefentry><refentrytitle>syslog
</refentrytitle><manvolnum>2</manvolnum></citerefentry>
1426 logging.
</para></listitem>
1430 <term><varname>RestrictNamespaces=
</varname></term>
1432 <listitem><para>Restricts access to Linux namespace functionality for the processes of this unit. For details
1433 about Linux namespaces, see
<citerefentry
1434 project='man-pages'
><refentrytitle>namespaces
</refentrytitle><manvolnum>7</manvolnum></citerefentry>. Either
1435 takes a boolean argument, or a space-separated list of namespace type identifiers. If false (the default), no
1436 restrictions on namespace creation and switching are made. If true, access to any kind of namespacing is
1437 prohibited. Otherwise, a space-separated list of namespace type identifiers must be specified, consisting of
1438 any combination of:
<constant>cgroup
</constant>,
<constant>ipc
</constant>,
<constant>net
</constant>,
1439 <constant>mnt
</constant>,
<constant>pid
</constant>,
<constant>user
</constant> and
<constant>uts
</constant>. Any
1440 namespace type listed is made accessible to the unit's processes, access to namespace types not listed is
1441 prohibited (whitelisting). By prepending the list with a single tilde character (
<literal>~
</literal>) the
1442 effect may be inverted: only the listed namespace types will be made inaccessible, all unlisted ones are
1443 permitted (blacklisting). If the empty string is assigned, the default namespace restrictions are applied,
1444 which is equivalent to false. This option may appear more than once, in which case the namespace types are
1445 merged by
<constant>OR
</constant>, or by
<constant>AND
</constant> if the lines are prefixed with
1446 <literal>~
</literal> (see examples below). Internally, this setting limits access to the
1447 <citerefentry><refentrytitle>unshare
</refentrytitle><manvolnum>2</manvolnum></citerefentry>,
1448 <citerefentry><refentrytitle>clone
</refentrytitle><manvolnum>2</manvolnum></citerefentry> and
1449 <citerefentry><refentrytitle>setns
</refentrytitle><manvolnum>2</manvolnum></citerefentry> system calls, taking
1450 the specified flags parameters into account. Note that — if this option is used — in addition to restricting
1451 creation and switching of the specified types of namespaces (or all of them, if true) access to the
1452 <function>setns()
</function> system call with a zero flags parameter is prohibited. This setting is only
1453 supported on x86, x86-
64, mips, mips-le, mips64, mips64-le, mips64-n32, mips64-le-n32, ppc64, ppc64-le, s390
1454 and s390x, and enforces no restrictions on other architectures. If running in user mode, or in system mode, but
1455 without the
<constant>CAP_SYS_ADMIN
</constant> capability (e.g. setting
<varname>User=
</varname>),
1456 <varname>NoNewPrivileges=yes
</varname> is implied.
</para>
1458 <para>Example: if a unit has the following,
1459 <programlisting>RestrictNamespaces=cgroup ipc
1460 RestrictNamespaces=cgroup net
</programlisting>
1461 then
<constant>cgroup
</constant>,
<constant>ipc
</constant>, and
<constant>net
</constant> are set.
1462 If the second line is prefixed with
<literal>~
</literal>, e.g.,
1463 <programlisting>RestrictNamespaces=cgroup ipc
1464 RestrictNamespaces=~cgroup net
</programlisting>
1465 then, only
<constant>ipc
</constant> is set.
</para></listitem>
1469 <term><varname>LockPersonality=
</varname></term>
1471 <listitem><para>Takes a boolean argument. If set, locks down the
<citerefentry
1472 project='man-pages'
><refentrytitle>personality
</refentrytitle><manvolnum>2</manvolnum></citerefentry> system
1473 call so that the kernel execution domain may not be changed from the default or the personality selected with
1474 <varname>Personality=
</varname> directive. This may be useful to improve security, because odd personality
1475 emulations may be poorly tested and source of vulnerabilities. If running in user mode, or in system mode, but
1476 without the
<constant>CAP_SYS_ADMIN
</constant> capability (e.g. setting
<varname>User=
</varname>),
1477 <varname>NoNewPrivileges=yes
</varname> is implied.
</para></listitem>
1481 <term><varname>MemoryDenyWriteExecute=
</varname></term>
1483 <listitem><para>Takes a boolean argument. If set, attempts to create memory mappings that are writable and
1484 executable at the same time, or to change existing memory mappings to become executable, or mapping shared
1485 memory segments as executable are prohibited. Specifically, a system call filter is added that rejects
1486 <citerefentry><refentrytitle>mmap
</refentrytitle><manvolnum>2</manvolnum></citerefentry> system calls with both
1487 <constant>PROT_EXEC
</constant> and
<constant>PROT_WRITE
</constant> set,
1488 <citerefentry><refentrytitle>mprotect
</refentrytitle><manvolnum>2</manvolnum></citerefentry> or
1489 <citerefentry><refentrytitle>pkey_mprotect
</refentrytitle><manvolnum>2</manvolnum></citerefentry> system calls
1490 with
<constant>PROT_EXEC
</constant> set and
1491 <citerefentry><refentrytitle>shmat
</refentrytitle><manvolnum>2</manvolnum></citerefentry> system calls with
1492 <constant>SHM_EXEC
</constant> set. Note that this option is incompatible with programs and libraries that
1493 generate program code dynamically at runtime, including JIT execution engines, executable stacks, and code
1494 "trampoline" feature of various C compilers. This option improves service security, as it makes harder for
1495 software exploits to change running code dynamically. However, the protection can be circumvented, if
1496 the service can write to a filesystem, which is not mounted with
<constant>noexec
</constant> (such as
1497 <filename>/dev/shm
</filename>), or it can use
<function>memfd_create()
</function>. This can be
1498 prevented by making such file systems inaccessible to the service
1499 (e.g.
<varname>InaccessiblePaths=/dev/shm
</varname>) and installing further system call filters
1500 (
<varname>SystemCallFilter=~memfd_create
</varname>). Note that this feature is fully available on
1501 x86-
64, and partially on x86. Specifically, the
<function>shmat()
</function> protection is not
1502 available on x86. Note that on systems supporting multiple ABIs (such as x86/x86-
64) it is
1503 recommended to turn off alternative ABIs for services, so that they cannot be used to circumvent the
1504 restrictions of this option. Specifically, it is recommended to combine this option with
1505 <varname>SystemCallArchitectures=native
</varname> or similar. If running in user mode, or in system
1506 mode, but without the
<constant>CAP_SYS_ADMIN
</constant> capability (e.g. setting
1507 <varname>User=
</varname>),
<varname>NoNewPrivileges=yes
</varname> is implied.
</para></listitem>
1511 <term><varname>RestrictRealtime=
</varname></term>
1513 <listitem><para>Takes a boolean argument. If set, any attempts to enable realtime scheduling in a process of
1514 the unit are refused. This restricts access to realtime task scheduling policies such as
1515 <constant>SCHED_FIFO
</constant>,
<constant>SCHED_RR
</constant> or
<constant>SCHED_DEADLINE
</constant>. See
1516 <citerefentry project='man-pages'
><refentrytitle>sched
</refentrytitle><manvolnum>7</manvolnum></citerefentry>
1517 for details about these scheduling policies. If running in user mode, or in system mode, but without the
1518 <constant>CAP_SYS_ADMIN
</constant> capability (e.g. setting
<varname>User=
</varname>),
1519 <varname>NoNewPrivileges=yes
</varname> is implied. Realtime scheduling policies may be used to monopolize CPU
1520 time for longer periods of time, and may hence be used to lock up or otherwise trigger Denial-of-Service
1521 situations on the system. It is hence recommended to restrict access to realtime scheduling to the few programs
1522 that actually require them. Defaults to off.
</para></listitem>
1526 <term><varname>RestrictSUIDSGID=
</varname></term>
1528 <listitem><para>Takes a boolean argument. If set, any attempts to set the set-user-ID (SUID) or
1529 set-group-ID (SGID) bits on files or directories will be denied (for details on these bits see
1531 project='man-pages'
><refentrytitle>inode
</refentrytitle><manvolnum>7</manvolnum></citerefentry>). If
1532 running in user mode, or in system mode, but without the
<constant>CAP_SYS_ADMIN
</constant>
1533 capability (e.g. setting
<varname>User=
</varname>),
<varname>NoNewPrivileges=yes
</varname> is
1534 implied. As the SUID/SGID bits are mechanisms to elevate privileges, and allows users to acquire the
1535 identity of other users, it is recommended to restrict creation of SUID/SGID files to the few
1536 programs that actually require them. Note that this restricts marking of any type of file system
1537 object with these bits, including both regular files and directories (where the SGID is a different
1538 meaning than for files, see documentation). This option is implied if
<varname>DynamicUser=
</varname>
1539 is enabled. Defaults to off.
</para></listitem>
1543 <term><varname>RemoveIPC=
</varname></term>
1545 <listitem><para>Takes a boolean parameter. If set, all System V and POSIX IPC objects owned by the user and
1546 group the processes of this unit are run as are removed when the unit is stopped. This setting only has an
1547 effect if at least one of
<varname>User=
</varname>,
<varname>Group=
</varname> and
1548 <varname>DynamicUser=
</varname> are used. It has no effect on IPC objects owned by the root user. Specifically,
1549 this removes System V semaphores, as well as System V and POSIX shared memory segments and message queues. If
1550 multiple units use the same user or group the IPC objects are removed when the last of these units is
1551 stopped. This setting is implied if
<varname>DynamicUser=
</varname> is set.
</para>
1553 <xi:include href=
"system-only.xml" xpointer=
"singular"/></listitem>
1557 <term><varname>PrivateMounts=
</varname></term>
1559 <listitem><para>Takes a boolean parameter. If set, the processes of this unit will be run in their own private
1560 file system (mount) namespace with all mount propagation from the processes towards the host's main file system
1561 namespace turned off. This means any file system mount points established or removed by the unit's processes
1562 will be private to them and not be visible to the host. However, file system mount points established or
1563 removed on the host will be propagated to the unit's processes. See
<citerefentry
1564 project='man-pages'
><refentrytitle>mount_namespaces
</refentrytitle><manvolnum>7</manvolnum></citerefentry> for
1565 details on file system namespaces. Defaults to off.
</para>
1567 <para>When turned on, this executes three operations for each invoked process: a new
1568 <constant>CLONE_NEWNS
</constant> namespace is created, after which all existing mounts are remounted to
1569 <constant>MS_SLAVE
</constant> to disable propagation from the unit's processes to the host (but leaving
1570 propagation in the opposite direction in effect). Finally, the mounts are remounted again to the propagation
1571 mode configured with
<varname>MountFlags=
</varname>, see below.
</para>
1573 <para>File system namespaces are set up individually for each process forked off by the service manager. Mounts
1574 established in the namespace of the process created by
<varname>ExecStartPre=
</varname> will hence be cleaned
1575 up automatically as soon as that process exits and will not be available to subsequent processes forked off for
1576 <varname>ExecStart=
</varname> (and similar applies to the various other commands configured for
1577 units). Similarly,
<varname>JoinsNamespaceOf=
</varname> does not permit sharing kernel mount namespaces between
1578 units, it only enables sharing of the
<filename>/tmp/
</filename> and
<filename>/var/tmp/
</filename>
1581 <para>Other file system namespace unit settings —
<varname>PrivateMounts=
</varname>,
1582 <varname>PrivateTmp=
</varname>,
<varname>PrivateDevices=
</varname>,
<varname>ProtectSystem=
</varname>,
1583 <varname>ProtectHome=
</varname>,
<varname>ReadOnlyPaths=
</varname>,
<varname>InaccessiblePaths=
</varname>,
1584 <varname>ReadWritePaths=
</varname>, … — also enable file system namespacing in a fashion equivalent to this
1585 option. Hence it is primarily useful to explicitly request this behaviour if none of the other settings are
1588 <xi:include href=
"system-only.xml" xpointer=
"singular"/></listitem>
1592 <term><varname>MountFlags=
</varname></term>
1594 <listitem><para>Takes a mount propagation setting:
<option>shared
</option>,
<option>slave
</option> or
1595 <option>private
</option>, which controls whether file system mount points in the file system namespaces set up
1596 for this unit's processes will receive or propagate mounts and unmounts from other file system namespaces. See
1597 <citerefentry project='man-pages'
><refentrytitle>mount
</refentrytitle><manvolnum>2</manvolnum></citerefentry>
1598 for details on mount propagation, and the three propagation flags in particular.
</para>
1600 <para>This setting only controls the
<emphasis>final
</emphasis> propagation setting in effect on all mount
1601 points of the file system namespace created for each process of this unit. Other file system namespacing unit
1602 settings (see the discussion in
<varname>PrivateMounts=
</varname> above) will implicitly disable mount and
1603 unmount propagation from the unit's processes towards the host by changing the propagation setting of all mount
1604 points in the unit's file system namepace to
<option>slave
</option> first. Setting this option to
1605 <option>shared
</option> does not reestablish propagation in that case.
</para>
1607 <para>If not set – but file system namespaces are enabled through another file system namespace unit setting –
1608 <option>shared
</option> mount propagation is used, but — as mentioned — as
<option>slave
</option> is applied
1609 first, propagation from the unit's processes to the host is still turned off.
</para>
1611 <para>It is not recommended to to use
<option>private
</option> mount propagation for units, as this means
1612 temporary mounts (such as removable media) of the host will stay mounted and thus indefinitely busy in forked
1613 off processes, as unmount propagation events won't be received by the file system namespace of the unit.
</para>
1615 <para>Usually, it is best to leave this setting unmodified, and use higher level file system namespacing
1616 options instead, in particular
<varname>PrivateMounts=
</varname>, see above.
</para>
1618 <xi:include href=
"system-only.xml" xpointer=
"singular"/></listitem>
1625 <title>System Call Filtering
</title>
1626 <variablelist class='unit-directives'
>
1629 <term><varname>SystemCallFilter=
</varname></term>
1631 <listitem><para>Takes a space-separated list of system call names. If this setting is used, all
1632 system calls executed by the unit processes except for the listed ones will result in immediate
1633 process termination with the
<constant>SIGSYS
</constant> signal (whitelisting). (See
1634 <varname>SystemCallErrorNumber=
</varname> below for changing the default action). If the first
1635 character of the list is
<literal>~
</literal>, the effect is inverted: only the listed system calls
1636 will result in immediate process termination (blacklisting). Blacklisted system calls and system call
1637 groups may optionally be suffixed with a colon (
<literal>:
</literal>) and
<literal>errno
</literal>
1638 error number (between
0 and
4095) or errno name such as
<constant>EPERM
</constant>,
1639 <constant>EACCES
</constant> or
<constant>EUCLEAN
</constant> (see
<citerefentry
1640 project='man-pages'
><refentrytitle>errno
</refentrytitle><manvolnum>3</manvolnum></citerefentry> for a
1641 full list). This value will be returned when a blacklisted system call is triggered, instead of
1642 terminating the processes immediately. This value takes precedence over the one given in
1643 <varname>SystemCallErrorNumber=
</varname>, see below. If running in user mode, or in system mode,
1644 but without the
<constant>CAP_SYS_ADMIN
</constant> capability (e.g. setting
1645 <varname>User=nobody
</varname>),
<varname>NoNewPrivileges=yes
</varname> is implied. This feature
1646 makes use of the Secure Computing Mode
2 interfaces of the kernel ('seccomp filtering') and is useful
1647 for enforcing a minimal sandboxing environment. Note that the
<function>execve
</function>,
1648 <function>exit
</function>,
<function>exit_group
</function>,
<function>getrlimit
</function>,
1649 <function>rt_sigreturn
</function>,
<function>sigreturn
</function> system calls and the system calls
1650 for querying time and sleeping are implicitly whitelisted and do not need to be listed
1651 explicitly. This option may be specified more than once, in which case the filter masks are
1652 merged. If the empty string is assigned, the filter is reset, all prior assignments will have no
1653 effect. This does not affect commands prefixed with
<literal>+
</literal>.
</para>
1655 <para>Note that on systems supporting multiple ABIs (such as x86/x86-
64) it is recommended to turn off
1656 alternative ABIs for services, so that they cannot be used to circumvent the restrictions of this
1657 option. Specifically, it is recommended to combine this option with
1658 <varname>SystemCallArchitectures=native
</varname> or similar.
</para>
1660 <para>Note that strict system call filters may impact execution and error handling code paths of the service
1661 invocation. Specifically, access to the
<function>execve
</function> system call is required for the execution
1662 of the service binary — if it is blocked service invocation will necessarily fail. Also, if execution of the
1663 service binary fails for some reason (for example: missing service executable), the error handling logic might
1664 require access to an additional set of system calls in order to process and log this failure correctly. It
1665 might be necessary to temporarily disable system call filters in order to simplify debugging of such
1668 <para>If you specify both types of this option (i.e. whitelisting and blacklisting), the first encountered
1669 will take precedence and will dictate the default action (termination or approval of a system call). Then the
1670 next occurrences of this option will add or delete the listed system calls from the set of the filtered system
1671 calls, depending of its type and the default action. (For example, if you have started with a whitelisting of
1672 <function>read
</function> and
<function>write
</function>, and right after it add a blacklisting of
1673 <function>write
</function>, then
<function>write
</function> will be removed from the set.)
</para>
1675 <para>As the number of possible system calls is large, predefined sets of system calls are provided. A set
1676 starts with
<literal>@
</literal> character, followed by name of the set.
1679 <title>Currently predefined system call sets
</title>
1682 <colspec colname='set'
/>
1683 <colspec colname='description'
/>
1687 <entry>Description
</entry>
1693 <entry>Asynchronous I/O (
<citerefentry project='man-pages'
><refentrytitle>io_setup
</refentrytitle><manvolnum>2</manvolnum></citerefentry>,
<citerefentry project='man-pages'
><refentrytitle>io_submit
</refentrytitle><manvolnum>2</manvolnum></citerefentry>, and related calls)
</entry>
1696 <entry>@basic-io
</entry>
1697 <entry>System calls for basic I/O: reading, writing, seeking, file descriptor duplication and closing (
<citerefentry project='man-pages'
><refentrytitle>read
</refentrytitle><manvolnum>2</manvolnum></citerefentry>,
<citerefentry project='man-pages'
><refentrytitle>write
</refentrytitle><manvolnum>2</manvolnum></citerefentry>, and related calls)
</entry>
1700 <entry>@chown
</entry>
1701 <entry>Changing file ownership (
<citerefentry project='man-pages'
><refentrytitle>chown
</refentrytitle><manvolnum>2</manvolnum></citerefentry>,
<citerefentry project='man-pages'
><refentrytitle>fchownat
</refentrytitle><manvolnum>2</manvolnum></citerefentry>, and related calls)
</entry>
1704 <entry>@clock
</entry>
1705 <entry>System calls for changing the system clock (
<citerefentry project='man-pages'
><refentrytitle>adjtimex
</refentrytitle><manvolnum>2</manvolnum></citerefentry>,
<citerefentry project='man-pages'
><refentrytitle>settimeofday
</refentrytitle><manvolnum>2</manvolnum></citerefentry>, and related calls)
</entry>
1708 <entry>@cpu-emulation
</entry>
1709 <entry>System calls for CPU emulation functionality (
<citerefentry project='man-pages'
><refentrytitle>vm86
</refentrytitle><manvolnum>2</manvolnum></citerefentry> and related calls)
</entry>
1712 <entry>@debug
</entry>
1713 <entry>Debugging, performance monitoring and tracing functionality (
<citerefentry project='man-pages'
><refentrytitle>ptrace
</refentrytitle><manvolnum>2</manvolnum></citerefentry>,
<citerefentry project='man-pages'
><refentrytitle>perf_event_open
</refentrytitle><manvolnum>2</manvolnum></citerefentry> and related calls)
</entry>
1716 <entry>@file-system
</entry>
1717 <entry>File system operations: opening, creating files and directories for read and write, renaming and removing them, reading file properties, or creating hard and symbolic links.
</entry>
1720 <entry>@io-event
</entry>
1721 <entry>Event loop system calls (
<citerefentry project='man-pages'
><refentrytitle>poll
</refentrytitle><manvolnum>2</manvolnum></citerefentry>,
<citerefentry project='man-pages'
><refentrytitle>select
</refentrytitle><manvolnum>2</manvolnum></citerefentry>,
<citerefentry project='man-pages'
><refentrytitle>epoll
</refentrytitle><manvolnum>7</manvolnum></citerefentry>,
<citerefentry project='man-pages'
><refentrytitle>eventfd
</refentrytitle><manvolnum>2</manvolnum></citerefentry> and related calls)
</entry>
1725 <entry>Pipes, SysV IPC, POSIX Message Queues and other IPC (
<citerefentry project='man-pages'
><refentrytitle>mq_overview
</refentrytitle><manvolnum>7</manvolnum></citerefentry>,
<citerefentry project='man-pages'
><refentrytitle>svipc
</refentrytitle><manvolnum>7</manvolnum></citerefentry>)
</entry>
1728 <entry>@keyring
</entry>
1729 <entry>Kernel keyring access (
<citerefentry project='man-pages'
><refentrytitle>keyctl
</refentrytitle><manvolnum>2</manvolnum></citerefentry> and related calls)
</entry>
1732 <entry>@memlock
</entry>
1733 <entry>Locking of memory into RAM (
<citerefentry project='man-pages'
><refentrytitle>mlock
</refentrytitle><manvolnum>2</manvolnum></citerefentry>,
<citerefentry project='man-pages'
><refentrytitle>mlockall
</refentrytitle><manvolnum>2</manvolnum></citerefentry> and related calls)
</entry>
1736 <entry>@module
</entry>
1737 <entry>Loading and unloading of kernel modules (
<citerefentry project='man-pages'
><refentrytitle>init_module
</refentrytitle><manvolnum>2</manvolnum></citerefentry>,
<citerefentry project='man-pages'
><refentrytitle>delete_module
</refentrytitle><manvolnum>2</manvolnum></citerefentry> and related calls)
</entry>
1740 <entry>@mount
</entry>
1741 <entry>Mounting and unmounting of file systems (
<citerefentry project='man-pages'
><refentrytitle>mount
</refentrytitle><manvolnum>2</manvolnum></citerefentry>,
<citerefentry project='man-pages'
><refentrytitle>chroot
</refentrytitle><manvolnum>2</manvolnum></citerefentry>, and related calls)
</entry>
1744 <entry>@network-io
</entry>
1745 <entry>Socket I/O (including local AF_UNIX):
<citerefentry project='man-pages'
><refentrytitle>socket
</refentrytitle><manvolnum>7</manvolnum></citerefentry>,
<citerefentry project='man-pages'
><refentrytitle>unix
</refentrytitle><manvolnum>7</manvolnum></citerefentry></entry>
1748 <entry>@obsolete
</entry>
1749 <entry>Unusual, obsolete or unimplemented (
<citerefentry project='man-pages'
><refentrytitle>create_module
</refentrytitle><manvolnum>2</manvolnum></citerefentry>,
<citerefentry project='man-pages'
><refentrytitle>gtty
</refentrytitle><manvolnum>2</manvolnum></citerefentry>, …)
</entry>
1752 <entry>@privileged
</entry>
1753 <entry>All system calls which need super-user capabilities (
<citerefentry project='man-pages'
><refentrytitle>capabilities
</refentrytitle><manvolnum>7</manvolnum></citerefentry>)
</entry>
1756 <entry>@process
</entry>
1757 <entry>Process control, execution, namespaceing operations (
<citerefentry project='man-pages'
><refentrytitle>clone
</refentrytitle><manvolnum>2</manvolnum></citerefentry>,
<citerefentry project='man-pages'
><refentrytitle>kill
</refentrytitle><manvolnum>2</manvolnum></citerefentry>,
<citerefentry project='man-pages'
><refentrytitle>namespaces
</refentrytitle><manvolnum>7</manvolnum></citerefentry>, …
</entry>
1760 <entry>@raw-io
</entry>
1761 <entry>Raw I/O port access (
<citerefentry project='man-pages'
><refentrytitle>ioperm
</refentrytitle><manvolnum>2</manvolnum></citerefentry>,
<citerefentry project='man-pages'
><refentrytitle>iopl
</refentrytitle><manvolnum>2</manvolnum></citerefentry>,
<function>pciconfig_read()
</function>, …)
</entry>
1764 <entry>@reboot
</entry>
1765 <entry>System calls for rebooting and reboot preparation (
<citerefentry project='man-pages'
><refentrytitle>reboot
</refentrytitle><manvolnum>2</manvolnum></citerefentry>,
<function>kexec()
</function>, …)
</entry>
1768 <entry>@resources
</entry>
1769 <entry>System calls for changing resource limits, memory and scheduling parameters (
<citerefentry project='man-pages'
><refentrytitle>setrlimit
</refentrytitle><manvolnum>2</manvolnum></citerefentry>,
<citerefentry project='man-pages'
><refentrytitle>setpriority
</refentrytitle><manvolnum>2</manvolnum></citerefentry>, …)
</entry>
1772 <entry>@setuid
</entry>
1773 <entry>System calls for changing user ID and group ID credentials, (
<citerefentry project='man-pages'
><refentrytitle>setuid
</refentrytitle><manvolnum>2</manvolnum></citerefentry>,
<citerefentry project='man-pages'
><refentrytitle>setgid
</refentrytitle><manvolnum>2</manvolnum></citerefentry>,
<citerefentry project='man-pages'
><refentrytitle>setresuid
</refentrytitle><manvolnum>2</manvolnum></citerefentry>, …)
</entry>
1776 <entry>@signal
</entry>
1777 <entry>System calls for manipulating and handling process signals (
<citerefentry project='man-pages'
><refentrytitle>signal
</refentrytitle><manvolnum>2</manvolnum></citerefentry>,
<citerefentry project='man-pages'
><refentrytitle>sigprocmask
</refentrytitle><manvolnum>2</manvolnum></citerefentry>, …)
</entry>
1780 <entry>@swap
</entry>
1781 <entry>System calls for enabling/disabling swap devices (
<citerefentry project='man-pages'
><refentrytitle>swapon
</refentrytitle><manvolnum>2</manvolnum></citerefentry>,
<citerefentry project='man-pages'
><refentrytitle>swapoff
</refentrytitle><manvolnum>2</manvolnum></citerefentry>)
</entry>
1784 <entry>@sync
</entry>
1785 <entry>Synchronizing files and memory to disk: (
<citerefentry project='man-pages'
><refentrytitle>fsync
</refentrytitle><manvolnum>2</manvolnum></citerefentry>,
<citerefentry project='man-pages'
><refentrytitle>msync
</refentrytitle><manvolnum>2</manvolnum></citerefentry>, and related calls)
</entry>
1788 <entry>@system-service
</entry>
1789 <entry>A reasonable set of system calls used by common system services, excluding any special purpose calls. This is the recommended starting point for whitelisting system calls for system services, as it contains what is typically needed by system services, but excludes overly specific interfaces. For example, the following APIs are excluded:
<literal>@clock
</literal>,
<literal>@mount
</literal>,
<literal>@swap
</literal>,
<literal>@reboot
</literal>.
</entry>
1792 <entry>@timer
</entry>
1793 <entry>System calls for scheduling operations by time (
<citerefentry project='man-pages'
><refentrytitle>alarm
</refentrytitle><manvolnum>2</manvolnum></citerefentry>,
<citerefentry project='man-pages'
><refentrytitle>timer_create
</refentrytitle><manvolnum>2</manvolnum></citerefentry>, …)
</entry>
1799 Note, that as new system calls are added to the kernel, additional system calls might be added to the groups
1800 above. Contents of the sets may also change between systemd versions. In addition, the list of system calls
1801 depends on the kernel version and architecture for which systemd was compiled. Use
1802 <command>systemd-analyze syscall-filter
</command> to list the actual list of system calls in each
1805 <para>Generally, whitelisting system calls (rather than blacklisting) is the safer mode of operation. It is
1806 recommended to enforce system call whitelists for all long-running system services. Specifically, the
1807 following lines are a relatively safe basic choice for the majority of system services:
</para>
1809 <programlisting>[Service]
1810 SystemCallFilter=@system-service
1811 SystemCallErrorNumber=EPERM
</programlisting>
1813 <para>Note that various kernel system calls are defined redundantly: there are multiple system calls
1814 for executing the same operation. For example, the
<function>pidfd_send_signal()
</function> system
1815 call may be used to execute operations similar to what can be done with the older
1816 <function>kill()
</function> system call, hence blocking the latter without the former only provides
1817 weak protection. Since new system calls are added regularly to the kernel as development progresses,
1818 keeping system call blacklists comprehensive requires constant work. It is thus recommended to use
1819 whitelisting instead, which offers the benefit that new system calls are by default implicitly
1820 blocked until the whitelist is updated.
</para>
1822 <para>Also note that a number of system calls are required to be accessible for the dynamic linker to
1823 work. The dynamic linker is required for running most regular programs (specifically: all dynamic ELF
1824 binaries, which is how most distributions build packaged programs). This means that blocking these
1825 system calls (which include
<function>open()
</function>,
<function>openat()
</function> or
1826 <function>mmap()
</function>) will make most programs typically shipped with generic distributions
1829 <para>It is recommended to combine the file system namespacing related options with
1830 <varname>SystemCallFilter=~@mount
</varname>, in order to prohibit the unit's processes to undo the
1831 mappings. Specifically these are the options
<varname>PrivateTmp=
</varname>,
1832 <varname>PrivateDevices=
</varname>,
<varname>ProtectSystem=
</varname>,
<varname>ProtectHome=
</varname>,
1833 <varname>ProtectKernelTunables=
</varname>,
<varname>ProtectControlGroups=
</varname>,
1834 <varname>ProtectKernelLogs=
</varname>,
<varname>ProtectClock=
</varname>,
<varname>ReadOnlyPaths=
</varname>,
1835 <varname>InaccessiblePaths=
</varname> and
<varname>ReadWritePaths=
</varname>.
</para></listitem>
1839 <term><varname>SystemCallErrorNumber=
</varname></term>
1841 <listitem><para>Takes an
<literal>errno
</literal> error number (between
1 and
4095) or errno name
1842 such as
<constant>EPERM
</constant>,
<constant>EACCES
</constant> or
<constant>EUCLEAN
</constant>, to
1843 return when the system call filter configured with
<varname>SystemCallFilter=
</varname> is triggered,
1844 instead of terminating the process immediately. See
<citerefentry
1845 project='man-pages'
><refentrytitle>errno
</refentrytitle><manvolnum>3</manvolnum></citerefentry> for a
1846 full list of error codes. When this setting is not used, or when the empty string is assigned, the
1847 process will be terminated immediately when the filter is triggered.
</para></listitem>
1851 <term><varname>SystemCallArchitectures=
</varname></term>
1853 <listitem><para>Takes a space-separated list of architecture identifiers to include in the system call
1854 filter. The known architecture identifiers are the same as for
<varname>ConditionArchitecture=
</varname>
1855 described in
<citerefentry><refentrytitle>systemd.unit
</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
1856 as well as
<constant>x32
</constant>,
<constant>mips64-n32
</constant>,
<constant>mips64-le-n32
</constant>, and
1857 the special identifier
<constant>native
</constant>. The special identifier
<constant>native
</constant>
1858 implicitly maps to the native architecture of the system (or more precisely: to the architecture the system
1859 manager is compiled for). If running in user mode, or in system mode, but without the
1860 <constant>CAP_SYS_ADMIN
</constant> capability (e.g. setting
<varname>User=nobody
</varname>),
1861 <varname>NoNewPrivileges=yes
</varname> is implied. By default, this option is set to the empty list, i.e. no
1862 system call architecture filtering is applied.
</para>
1864 <para>If this setting is used, processes of this unit will only be permitted to call native system calls, and
1865 system calls of the specified architectures. For the purposes of this option, the x32 architecture is treated
1866 as including x86-
64 system calls. However, this setting still fulfills its purpose, as explained below, on
1869 <para>System call filtering is not equally effective on all architectures. For example, on x86
1870 filtering of network socket-related calls is not possible, due to ABI limitations — a limitation that x86-
64
1871 does not have, however. On systems supporting multiple ABIs at the same time — such as x86/x86-
64 — it is hence
1872 recommended to limit the set of permitted system call architectures so that secondary ABIs may not be used to
1873 circumvent the restrictions applied to the native ABI of the system. In particular, setting
1874 <varname>SystemCallArchitectures=native
</varname> is a good choice for disabling non-native ABIs.
</para>
1876 <para>System call architectures may also be restricted system-wide via the
1877 <varname>SystemCallArchitectures=
</varname> option in the global configuration. See
1878 <citerefentry><refentrytitle>systemd-system.conf
</refentrytitle><manvolnum>5</manvolnum></citerefentry> for
1879 details.
</para></listitem>
1886 <title>Environment
</title>
1888 <variablelist class='unit-directives'
>
1891 <term><varname>Environment=
</varname></term>
1893 <listitem><para>Sets environment variables for executed processes. Takes a space-separated list of variable
1894 assignments. This option may be specified more than once, in which case all listed variables will be set. If
1895 the same variable is set twice, the later setting will override the earlier setting. If the empty string is
1896 assigned to this option, the list of environment variables is reset, all prior assignments have no
1897 effect. Variable expansion is not performed inside the strings, however, specifier expansion is possible. The $
1898 character has no special meaning. If you need to assign a value containing spaces or the equals sign to a
1899 variable, use double quotes (
") for the assignment.</para>
1902 <programlisting>Environment="VAR1=word1 word2
" VAR2=word3 "VAR3=$word
5 6"</programlisting>
1903 gives three variables <literal>VAR1</literal>,
1904 <literal>VAR2</literal>, <literal>VAR3</literal>
1905 with the values <literal>word1 word2</literal>,
1906 <literal>word3</literal>, <literal>$word 5 6</literal>.
1911 project='man-pages'><refentrytitle>environ</refentrytitle><manvolnum>7</manvolnum></citerefentry> for details
1912 about environment variables.</para>
1914 <para>Note that environment variables are not suitable for passing secrets (such as passwords, key material, …)
1915 to service processes. Environment variables set for a unit are exposed to unprivileged clients via D-Bus IPC,
1916 and generally not understood as being data that requires protection. Moreover, environment variables are
1917 propagated down the process tree, including across security boundaries (such as setuid/setgid executables), and
1918 hence might leak to processes that should not have access to the secret data.</para></listitem>
1922 <term><varname>EnvironmentFile=</varname></term>
1924 <listitem><para>Similar to <varname>Environment=</varname> but reads the environment variables from a text
1925 file. The text file should contain new-line-separated variable assignments. Empty lines, lines without an
1926 <literal>=</literal> separator, or lines starting with ; or # will be ignored, which may be used for
1927 commenting. A line ending with a backslash will be concatenated with the following one, allowing multiline
1928 variable definitions. The parser strips leading and trailing whitespace from the values of assignments, unless
1929 you use double quotes (").
</para>
1931 <para><ulink url=
"https://en.wikipedia.org/wiki/Escape_sequences_in_C#Table_of_escape_sequences">C escapes
</ulink>
1932 are supported, but not
1933 <ulink url=
"https://en.wikipedia.org/wiki/Control_character#In_ASCII">most control characters
</ulink>.
1934 <literal>\t
</literal> and
<literal>\n
</literal> can be used to insert tabs and newlines within
1935 <varname>EnvironmentFile=
</varname>.
</para>
1937 <para>The argument passed should be an absolute filename or wildcard expression, optionally prefixed with
1938 <literal>-
</literal>, which indicates that if the file does not exist, it will not be read and no error or
1939 warning message is logged. This option may be specified more than once in which case all specified files are
1940 read. If the empty string is assigned to this option, the list of file to read is reset, all prior assignments
1941 have no effect.
</para>
1943 <para>The files listed with this directive will be read shortly before the process is executed (more
1944 specifically, after all processes from a previous unit state terminated. This means you can generate these
1945 files in one unit state, and read it with this option in the next. The files are read from the file
1946 system of the service manager, before any file system changes like bind mounts take place).
</para>
1948 <para>Settings from these files override settings made with
<varname>Environment=
</varname>. If the same
1949 variable is set twice from these files, the files will be read in the order they are specified and the later
1950 setting will override the earlier setting.
</para></listitem>
1954 <term><varname>PassEnvironment=
</varname></term>
1956 <listitem><para>Pass environment variables set for the system service manager to executed processes. Takes a
1957 space-separated list of variable names. This option may be specified more than once, in which case all listed
1958 variables will be passed. If the empty string is assigned to this option, the list of environment variables to
1959 pass is reset, all prior assignments have no effect. Variables specified that are not set for the system
1960 manager will not be passed and will be silently ignored. Note that this option is only relevant for the system
1961 service manager, as system services by default do not automatically inherit any environment variables set for
1962 the service manager itself. However, in case of the user service manager all environment variables are passed
1963 to the executed processes anyway, hence this option is without effect for the user service manager.
</para>
1965 <para>Variables set for invoked processes due to this setting are subject to being overridden by those
1966 configured with
<varname>Environment=
</varname> or
<varname>EnvironmentFile=
</varname>.
</para>
1968 <para><ulink url=
"https://en.wikipedia.org/wiki/Escape_sequences_in_C#Table_of_escape_sequences">C escapes
</ulink>
1969 are supported, but not
1970 <ulink url=
"https://en.wikipedia.org/wiki/Control_character#In_ASCII">most control characters
</ulink>.
1971 <literal>\t
</literal> and
<literal>\n
</literal> can be used to insert tabs and newlines within
1972 <varname>EnvironmentFile=
</varname>.
</para>
1975 <programlisting>PassEnvironment=VAR1 VAR2 VAR3
</programlisting>
1976 passes three variables
<literal>VAR1
</literal>,
1977 <literal>VAR2
</literal>,
<literal>VAR3
</literal>
1978 with the values set for those variables in PID1.
</para>
1982 project='man-pages'
><refentrytitle>environ
</refentrytitle><manvolnum>7</manvolnum></citerefentry> for details
1983 about environment variables.
</para></listitem>
1987 <term><varname>UnsetEnvironment=
</varname></term>
1989 <listitem><para>Explicitly unset environment variable assignments that would normally be passed from the
1990 service manager to invoked processes of this unit. Takes a space-separated list of variable names or variable
1991 assignments. This option may be specified more than once, in which case all listed variables/assignments will
1992 be unset. If the empty string is assigned to this option, the list of environment variables/assignments to
1993 unset is reset. If a variable assignment is specified (that is: a variable name, followed by
1994 <literal>=
</literal>, followed by its value), then any environment variable matching this precise assignment is
1995 removed. If a variable name is specified (that is a variable name without any following
<literal>=
</literal> or
1996 value), then any assignment matching the variable name, regardless of its value is removed. Note that the
1997 effect of
<varname>UnsetEnvironment=
</varname> is applied as final step when the environment list passed to
1998 executed processes is compiled. That means it may undo assignments from any configuration source, including
1999 assignments made through
<varname>Environment=
</varname> or
<varname>EnvironmentFile=
</varname>, inherited from
2000 the system manager's global set of environment variables, inherited via
<varname>PassEnvironment=
</varname>,
2001 set by the service manager itself (such as
<varname>$NOTIFY_SOCKET
</varname> and such), or set by a PAM module
2002 (in case
<varname>PAMName=
</varname> is used).
</para>
2006 project='man-pages'
><refentrytitle>environ
</refentrytitle><manvolnum>7</manvolnum></citerefentry> for details
2007 about environment variables.
</para></listitem>
2014 <title>Logging and Standard Input/Output
</title>
2016 <variablelist class='unit-directives'
>
2019 <term><varname>StandardInput=
</varname></term>
2021 <listitem><para>Controls where file descriptor
0 (STDIN) of the executed processes is connected to. Takes one
2022 of
<option>null
</option>,
<option>tty
</option>,
<option>tty-force
</option>,
<option>tty-fail
</option>,
2023 <option>data
</option>,
<option>file:
<replaceable>path
</replaceable></option>,
<option>socket
</option> or
2024 <option>fd:
<replaceable>name
</replaceable></option>.
</para>
2026 <para>If
<option>null
</option> is selected, standard input will be connected to
<filename>/dev/null
</filename>,
2027 i.e. all read attempts by the process will result in immediate EOF.
</para>
2029 <para>If
<option>tty
</option> is selected, standard input is connected to a TTY (as configured by
2030 <varname>TTYPath=
</varname>, see below) and the executed process becomes the controlling process of the
2031 terminal. If the terminal is already being controlled by another process, the executed process waits until the
2032 current controlling process releases the terminal.
</para>
2034 <para><option>tty-force
</option> is similar to
<option>tty
</option>, but the executed process is forcefully and
2035 immediately made the controlling process of the terminal, potentially removing previous controlling processes
2036 from the terminal.
</para>
2038 <para><option>tty-fail
</option> is similar to
<option>tty
</option>, but if the terminal already has a
2039 controlling process start-up of the executed process fails.
</para>
2041 <para>The
<option>data
</option> option may be used to configure arbitrary textual or binary data to pass via
2042 standard input to the executed process. The data to pass is configured via
2043 <varname>StandardInputText=
</varname>/
<varname>StandardInputData=
</varname> (see below). Note that the actual
2044 file descriptor type passed (memory file, regular file, UNIX pipe, …) might depend on the kernel and available
2045 privileges. In any case, the file descriptor is read-only, and when read returns the specified data followed by
2048 <para>The
<option>file:
<replaceable>path
</replaceable></option> option may be used to connect a specific file
2049 system object to standard input. An absolute path following the
<literal>:
</literal> character is expected,
2050 which may refer to a regular file, a FIFO or special file. If an
<constant>AF_UNIX
</constant> socket in the
2051 file system is specified, a stream socket is connected to it. The latter is useful for connecting standard
2052 input of processes to arbitrary system services.
</para>
2054 <para>The
<option>socket
</option> option is valid in socket-activated services only, and requires the relevant
2055 socket unit file (see
2056 <citerefentry><refentrytitle>systemd.socket
</refentrytitle><manvolnum>5</manvolnum></citerefentry> for details)
2057 to have
<varname>Accept=yes
</varname> set, or to specify a single socket only. If this option is set, standard
2058 input will be connected to the socket the service was activated from, which is primarily useful for
2059 compatibility with daemons designed for use with the traditional
<citerefentry
2060 project='freebsd'
><refentrytitle>inetd
</refentrytitle><manvolnum>8</manvolnum></citerefentry> socket activation
2063 <para>The
<option>fd:
<replaceable>name
</replaceable></option> option connects standard input to a specific,
2064 named file descriptor provided by a socket unit. The name may be specified as part of this option, following a
2065 <literal>:
</literal> character (e.g.
<literal>fd:foobar
</literal>). If no name is specified, the name
2066 <literal>stdin
</literal> is implied (i.e.
<literal>fd
</literal> is equivalent to
<literal>fd:stdin
</literal>).
2067 At least one socket unit defining the specified name must be provided via the
<varname>Sockets=
</varname>
2068 option, and the file descriptor name may differ from the name of its containing socket unit. If multiple
2069 matches are found, the first one will be used. See
<varname>FileDescriptorName=
</varname> in
2070 <citerefentry><refentrytitle>systemd.socket
</refentrytitle><manvolnum>5</manvolnum></citerefentry> for more
2071 details about named file descriptors and their ordering.
</para>
2073 <para>This setting defaults to
<option>null
</option>.
</para></listitem>
2077 <term><varname>StandardOutput=
</varname></term>
2079 <listitem><para>Controls where file descriptor
1 (stdout) of the executed processes is connected
2080 to. Takes one of
<option>inherit
</option>,
<option>null
</option>,
<option>tty
</option>,
2081 <option>journal
</option>,
<option>kmsg
</option>,
<option>journal+console
</option>,
2082 <option>kmsg+console
</option>,
<option>file:
<replaceable>path
</replaceable></option>,
2083 <option>append:
<replaceable>path
</replaceable></option>,
<option>socket
</option> or
2084 <option>fd:
<replaceable>name
</replaceable></option>.
</para>
2086 <para><option>inherit
</option> duplicates the file descriptor of standard input for standard output.
</para>
2088 <para><option>null
</option> connects standard output to
<filename>/dev/null
</filename>, i.e. everything written
2089 to it will be lost.
</para>
2091 <para><option>tty
</option> connects standard output to a tty (as configured via
<varname>TTYPath=
</varname>,
2092 see below). If the TTY is used for output only, the executed process will not become the controlling process of
2093 the terminal, and will not fail or wait for other processes to release the terminal.
</para>
2095 <para><option>journal
</option> connects standard output with the journal, which is accessible via
2096 <citerefentry><refentrytitle>journalctl
</refentrytitle><manvolnum>1</manvolnum></citerefentry>. Note
2097 that everything that is written to kmsg (see below) is implicitly stored in the journal as well, the
2098 specific option listed below is hence a superset of this one. (Also note that any external,
2099 additional syslog daemons receive their log data from the journal, too, hence this is the option to
2100 use when logging shall be processed with such a daemon.)
</para>
2102 <para><option>kmsg
</option> connects standard output with the kernel log buffer which is accessible via
2103 <citerefentry project='man-pages'
><refentrytitle>dmesg
</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
2104 in addition to the journal. The journal daemon might be configured to send all logs to kmsg anyway, in which
2105 case this option is no different from
<option>journal
</option>.
</para>
2107 <para><option>journal+console
</option> and
<option>kmsg+console
</option> work in a similar way as the
2108 two options above but copy the output to the system console as well.
</para>
2110 <para>The
<option>file:
<replaceable>path
</replaceable></option> option may be used to connect a specific file
2111 system object to standard output. The semantics are similar to the same option of
2112 <varname>StandardInput=
</varname>, see above. If
<replaceable>path
</replaceable> refers to a regular file
2113 on the filesystem, it is opened (created if it doesn't exist yet) for writing at the beginning of the file,
2114 but without truncating it.
2115 If standard input and output are directed to the same file path, it is opened only once, for reading as well
2116 as writing and duplicated. This is particularly useful when the specified path refers to an
2117 <constant>AF_UNIX
</constant> socket in the file system, as in that case only a
2118 single stream connection is created for both input and output.
</para>
2120 <para><option>append:
<replaceable>path
</replaceable></option> is similar to
<option>file:
<replaceable>path
2121 </replaceable></option> above, but it opens the file in append mode.
</para>
2123 <para><option>socket
</option> connects standard output to a socket acquired via socket activation. The
2124 semantics are similar to the same option of
<varname>StandardInput=
</varname>, see above.
</para>
2126 <para>The
<option>fd:
<replaceable>name
</replaceable></option> option connects standard output to a specific,
2127 named file descriptor provided by a socket unit. A name may be specified as part of this option, following a
2128 <literal>:
</literal> character (e.g.
<literal>fd:foobar
</literal>). If no name is specified, the name
2129 <literal>stdout
</literal> is implied (i.e.
<literal>fd
</literal> is equivalent to
2130 <literal>fd:stdout
</literal>). At least one socket unit defining the specified name must be provided via the
2131 <varname>Sockets=
</varname> option, and the file descriptor name may differ from the name of its containing
2132 socket unit. If multiple matches are found, the first one will be used. See
2133 <varname>FileDescriptorName=
</varname> in
2134 <citerefentry><refentrytitle>systemd.socket
</refentrytitle><manvolnum>5</manvolnum></citerefentry> for more
2135 details about named descriptors and their ordering.
</para>
2137 <para>If the standard output (or error output, see below) of a unit is connected to the journal or
2138 the kernel log buffer, the unit will implicitly gain a dependency of type
<varname>After=
</varname>
2139 on
<filename>systemd-journald.socket
</filename> (also see the
"Implicit Dependencies" section
2140 above). Also note that in this case stdout (or stderr, see below) will be an
2141 <constant>AF_UNIX
</constant> stream socket, and not a pipe or FIFO that can be re-opened. This means
2142 when executing shell scripts the construct
<command>echo
"hello" > /dev/stderr
</command> for
2143 writing text to stderr will not work. To mitigate this use the construct
<command>echo
"hello"
2144 >&2</command> instead, which is mostly equivalent and avoids this pitfall.
</para>
2146 <para>This setting defaults to the value set with
<varname>DefaultStandardOutput=
</varname> in
2147 <citerefentry><refentrytitle>systemd-system.conf
</refentrytitle><manvolnum>5</manvolnum></citerefentry>, which
2148 defaults to
<option>journal
</option>. Note that setting this parameter might result in additional dependencies
2149 to be added to the unit (see above).
</para></listitem>
2153 <term><varname>StandardError=
</varname></term>
2155 <listitem><para>Controls where file descriptor
2 (stderr) of the executed processes is connected to. The
2156 available options are identical to those of
<varname>StandardOutput=
</varname>, with some exceptions: if set to
2157 <option>inherit
</option> the file descriptor used for standard output is duplicated for standard error, while
2158 <option>fd:
<replaceable>name
</replaceable></option> will use a default file descriptor name of
2159 <literal>stderr
</literal>.
</para>
2161 <para>This setting defaults to the value set with
<varname>DefaultStandardError=
</varname> in
2162 <citerefentry><refentrytitle>systemd-system.conf
</refentrytitle><manvolnum>5</manvolnum></citerefentry>, which
2163 defaults to
<option>inherit
</option>. Note that setting this parameter might result in additional dependencies
2164 to be added to the unit (see above).
</para></listitem>
2168 <term><varname>StandardInputText=
</varname></term>
2169 <term><varname>StandardInputData=
</varname></term>
2171 <listitem><para>Configures arbitrary textual or binary data to pass via file descriptor
0 (STDIN) to the
2172 executed processes. These settings have no effect unless
<varname>StandardInput=
</varname> is set to
2173 <option>data
</option>. Use this option to embed process input data directly in the unit file.
</para>
2175 <para><varname>StandardInputText=
</varname> accepts arbitrary textual data. C-style escapes for special
2176 characters as well as the usual
<literal>%
</literal>-specifiers are resolved. Each time this setting is used
2177 the specified text is appended to the per-unit data buffer, followed by a newline character (thus every use
2178 appends a new line to the end of the buffer). Note that leading and trailing whitespace of lines configured
2179 with this option is removed. If an empty line is specified the buffer is cleared (hence, in order to insert an
2180 empty line, add an additional
<literal>\n
</literal> to the end or beginning of a line).
</para>
2182 <para><varname>StandardInputData=
</varname> accepts arbitrary binary data, encoded in
<ulink
2183 url=
"https://tools.ietf.org/html/rfc2045#section-6.8">Base64
</ulink>. No escape sequences or specifiers are
2184 resolved. Any whitespace in the encoded version is ignored during decoding.
</para>
2186 <para>Note that
<varname>StandardInputText=
</varname> and
<varname>StandardInputData=
</varname> operate on the
2187 same data buffer, and may be mixed in order to configure both binary and textual data for the same input
2188 stream. The textual or binary data is joined strictly in the order the settings appear in the unit
2189 file. Assigning an empty string to either will reset the data buffer.
</para>
2191 <para>Please keep in mind that in order to maintain readability long unit file settings may be split into
2192 multiple lines, by suffixing each line (except for the last) with a
<literal>\
</literal> character (see
2193 <citerefentry><refentrytitle>systemd.unit
</refentrytitle><manvolnum>5</manvolnum></citerefentry> for
2194 details). This is particularly useful for large data configured with these two options. Example:
</para>
2198 StandardInputData=SWNrIHNpdHplIGRhIHVuJyBlc3NlIEtsb3BzLAp1ZmYgZWVtYWwga2xvcHAncy4KSWNrIGtpZWtl \
2199 LCBzdGF1bmUsIHd1bmRyZSBtaXIsCnVmZiBlZW1hbCBqZWh0IHNlIHVmZiBkaWUgVMO8ci4KTmFu \
2200 dSwgZGVuayBpY2ssIGljayBkZW5rIG5hbnUhCkpldHogaXNzZSB1ZmYsIGVyc2NodCB3YXIgc2Ug \
2201 enUhCkljayBqZWhlIHJhdXMgdW5kIGJsaWNrZSDigJQKdW5kIHdlciBzdGVodCBkcmF1w59lbj8g \
2203 …
</programlisting></listitem>
2207 <term><varname>LogLevelMax=
</varname></term>
2209 <listitem><para>Configures filtering by log level of log messages generated by this unit. Takes a
2210 <command>syslog
</command> log level, one of
<option>emerg
</option> (lowest log level, only highest priority
2211 messages),
<option>alert
</option>,
<option>crit
</option>,
<option>err
</option>,
<option>warning
</option>,
2212 <option>notice
</option>,
<option>info
</option>,
<option>debug
</option> (highest log level, also lowest priority
2213 messages). See
<citerefentry
2214 project='man-pages'
><refentrytitle>syslog
</refentrytitle><manvolnum>3</manvolnum></citerefentry> for
2215 details. By default no filtering is applied (i.e. the default maximum log level is
<option>debug
</option>). Use
2216 this option to configure the logging system to drop log messages of a specific service above the specified
2217 level. For example, set
<varname>LogLevelMax=
</varname><option>info
</option> in order to turn off debug logging
2218 of a particularly chatty unit. Note that the configured level is applied to any log messages written by any
2219 of the processes belonging to this unit, sent via any supported logging protocol. The filtering is applied
2220 early in the logging pipeline, before any kind of further processing is done. Moreover, messages which pass
2221 through this filter successfully might still be dropped by filters applied at a later stage in the logging
2222 subsystem. For example,
<varname>MaxLevelStore=
</varname> configured in
2223 <citerefentry><refentrytitle>journald.conf
</refentrytitle><manvolnum>5</manvolnum></citerefentry> might
2224 prohibit messages of higher log levels to be stored on disk, even though the per-unit
2225 <varname>LogLevelMax=
</varname> permitted it to be processed.
</para></listitem>
2229 <term><varname>LogExtraFields=
</varname></term>
2231 <listitem><para>Configures additional log metadata fields to include in all log records generated by
2232 processes associated with this unit. This setting takes one or more journal field assignments in the
2233 format
<literal>FIELD=VALUE
</literal> separated by whitespace. See
2234 <citerefentry><refentrytitle>systemd.journal-fields
</refentrytitle><manvolnum>7</manvolnum></citerefentry>
2235 for details on the journal field concept. Even though the underlying journal implementation permits
2236 binary field values, this setting accepts only valid UTF-
8 values. To include space characters in a
2237 journal field value, enclose the assignment in double quotes (
"). <!-- " fake closing quote for emacs-->
2238 The usual specifiers are expanded in all assignments (see below). Note that this setting is not only
2239 useful for attaching additional metadata to log records of a unit, but given that all fields and
2240 values are indexed may also be used to implement cross-unit log record matching. Assign an empty
2241 string to reset the list.
</para></listitem>
2245 <term><varname>LogRateLimitIntervalSec=
</varname></term>
2246 <term><varname>LogRateLimitBurst=
</varname></term>
2248 <listitem><para>Configures the rate limiting that is applied to messages generated by this unit. If, in the
2249 time interval defined by
<varname>LogRateLimitIntervalSec=
</varname>, more messages than specified in
2250 <varname>LogRateLimitBurst=
</varname> are logged by a service, all further messages within the interval are
2251 dropped until the interval is over. A message about the number of dropped messages is generated. The time
2252 specification for
<varname>LogRateLimitIntervalSec=
</varname> may be specified in the following units:
"s",
2253 "min",
"h",
"ms",
"us" (see
2254 <citerefentry><refentrytitle>systemd.time
</refentrytitle><manvolnum>7</manvolnum></citerefentry> for details).
2255 The default settings are set by
<varname>RateLimitIntervalSec=
</varname> and
<varname>RateLimitBurst=
</varname>
2256 configured in
<citerefentry><refentrytitle>journald.conf
</refentrytitle><manvolnum>5</manvolnum></citerefentry>.
2261 <term><varname>LogNamespace=
</varname></term>
2263 <listitem><para>Run the unit's processes in the specified journal namespace. Expects a short
2264 user-defined string identifying the namespace. If not used the processes of the service are run in
2265 the default journal namespace, i.e. their log stream is collected and processed by
2266 <filename>systemd-journald.service
</filename>. If this option is used any log data generated by
2267 processes of this unit (regardless if via the
<function>syslog()
</function>, journal native logging
2268 or stdout/stderr logging) is collected and processed by an instance of the
2269 <filename>systemd-journald@.service
</filename> template unit, which manages the specified
2270 namespace. The log data is stored in a data store independent from the default log namespace's data
2272 <citerefentry><refentrytitle>systemd-journald.service
</refentrytitle><manvolnum>8</manvolnum></citerefentry>
2273 for details about journal namespaces.
</para>
2275 <para>Internally, journal namespaces are implemented through Linux mount namespacing and
2276 over-mounting the directory that contains the relevant
<constant>AF_UNIX
</constant> sockets used for
2277 logging in the unit's mount namespace. Since mount namespaces are used this setting disconnects
2278 propagation of mounts from the unit's processes to the host, similar to how
2279 <varname>ReadOnlyPaths=
</varname> and similar settings (see above) work. Journal namespaces may hence
2280 not be used for services that need to establish mount points on the host.
</para>
2282 <para>When this option is used the unit will automatically gain ordering and requirement dependencies
2283 on the two socket units associated with the
<filename>systemd-journald@.service
</filename> instance
2284 so that they are automatically established prior to the unit starting up. Note that when this option
2285 is used log output of this service does not appear in the regular
2286 <citerefentry><refentrytitle>journalctl
</refentrytitle><manvolnum>1</manvolnum></citerefentry>
2287 output, unless the
<option>--namespace=
</option> option is used.
</para></listitem>
2291 <term><varname>SyslogIdentifier=
</varname></term>
2293 <listitem><para>Sets the process name (
"<command>syslog</command> tag") to prefix log lines sent to
2294 the logging system or the kernel log buffer with. If not set, defaults to the process name of the
2295 executed process. This option is only useful when
<varname>StandardOutput=
</varname> or
2296 <varname>StandardError=
</varname> are set to
<option>journal
</option> or
<option>kmsg
</option> (or to
2297 the same settings in combination with
<option>+console
</option>) and only applies to log messages
2298 written to stdout or stderr.
</para></listitem>
2302 <term><varname>SyslogFacility=
</varname></term>
2304 <listitem><para>Sets the
<command>syslog
</command> facility identifier to use when logging. One of
2305 <option>kern
</option>,
<option>user
</option>,
<option>mail
</option>,
<option>daemon
</option>,
2306 <option>auth
</option>,
<option>syslog
</option>,
<option>lpr
</option>,
<option>news
</option>,
2307 <option>uucp
</option>,
<option>cron
</option>,
<option>authpriv
</option>,
<option>ftp
</option>,
2308 <option>local0
</option>,
<option>local1
</option>,
<option>local2
</option>,
<option>local3
</option>,
2309 <option>local4
</option>,
<option>local5
</option>,
<option>local6
</option> or
2310 <option>local7
</option>. See
<citerefentry
2311 project='man-pages'
><refentrytitle>syslog
</refentrytitle><manvolnum>3</manvolnum></citerefentry> for
2312 details. This option is only useful when
<varname>StandardOutput=
</varname> or
2313 <varname>StandardError=
</varname> are set to
<option>journal
</option> or
<option>kmsg
</option> (or to
2314 the same settings in combination with
<option>+console
</option>), and only applies to log messages
2315 written to stdout or stderr. Defaults to
<option>daemon
</option>.
</para></listitem>
2319 <term><varname>SyslogLevel=
</varname></term>
2321 <listitem><para>The default
<command>syslog
</command> log level to use when logging to the logging system or
2322 the kernel log buffer. One of
<option>emerg
</option>,
<option>alert
</option>,
<option>crit
</option>,
2323 <option>err
</option>,
<option>warning
</option>,
<option>notice
</option>,
<option>info
</option>,
2324 <option>debug
</option>. See
<citerefentry
2325 project='man-pages'
><refentrytitle>syslog
</refentrytitle><manvolnum>3</manvolnum></citerefentry> for
2326 details. This option is only useful when
<varname>StandardOutput=
</varname> or
2327 <varname>StandardError=
</varname> are set to
<option>journal
</option> or
2328 <option>kmsg
</option> (or to the same settings in combination with
<option>+console
</option>), and only applies
2329 to log messages written to stdout or stderr. Note that individual lines output by executed processes may be
2330 prefixed with a different log level which can be used to override the default log level specified here. The
2331 interpretation of these prefixes may be disabled with
<varname>SyslogLevelPrefix=
</varname>, see below. For
2332 details, see
<citerefentry><refentrytitle>sd-daemon
</refentrytitle><manvolnum>3</manvolnum></citerefentry>.
2333 Defaults to
<option>info
</option>.
</para></listitem>
2337 <term><varname>SyslogLevelPrefix=
</varname></term>
2339 <listitem><para>Takes a boolean argument. If true and
<varname>StandardOutput=
</varname> or
2340 <varname>StandardError=
</varname> are set to
<option>journal
</option> or
<option>kmsg
</option> (or to
2341 the same settings in combination with
<option>+console
</option>), log lines written by the executed
2342 process that are prefixed with a log level will be processed with this log level set but the prefix
2343 removed. If set to false, the interpretation of these prefixes is disabled and the logged lines are
2344 passed on as-is. This only applies to log messages written to stdout or stderr. For details about
2346 <citerefentry><refentrytitle>sd-daemon
</refentrytitle><manvolnum>3</manvolnum></citerefentry>.
2347 Defaults to true.
</para></listitem>
2351 <term><varname>TTYPath=
</varname></term>
2353 <listitem><para>Sets the terminal device node to use if standard input, output, or error are connected to a TTY
2354 (see above). Defaults to
<filename>/dev/console
</filename>.
</para></listitem>
2358 <term><varname>TTYReset=
</varname></term>
2360 <listitem><para>Reset the terminal device specified with
<varname>TTYPath=
</varname> before and after
2361 execution. Defaults to
<literal>no
</literal>.
</para></listitem>
2365 <term><varname>TTYVHangup=
</varname></term>
2367 <listitem><para>Disconnect all clients which have opened the terminal device specified with
2368 <varname>TTYPath=
</varname> before and after execution. Defaults to
<literal>no
</literal>.
</para></listitem>
2372 <term><varname>TTYVTDisallocate=
</varname></term>
2374 <listitem><para>If the terminal device specified with
<varname>TTYPath=
</varname> is a virtual console
2375 terminal, try to deallocate the TTY before and after execution. This ensures that the screen and scrollback
2376 buffer is cleared. Defaults to
<literal>no
</literal>.
</para></listitem>
2382 <title>System V Compatibility
</title>
2383 <variablelist class='unit-directives'
>
2386 <term><varname>UtmpIdentifier=
</varname></term>
2388 <listitem><para>Takes a four character identifier string for an
<citerefentry
2389 project='man-pages'
><refentrytitle>utmp
</refentrytitle><manvolnum>5</manvolnum></citerefentry> and wtmp entry
2390 for this service. This should only be set for services such as
<command>getty
</command> implementations (such
2392 project='die-net'
><refentrytitle>agetty
</refentrytitle><manvolnum>8</manvolnum></citerefentry>) where utmp/wtmp
2393 entries must be created and cleared before and after execution, or for services that shall be executed as if
2394 they were run by a
<command>getty
</command> process (see below). If the configured string is longer than four
2395 characters, it is truncated and the terminal four characters are used. This setting interprets %I style string
2396 replacements. This setting is unset by default, i.e. no utmp/wtmp entries are created or cleaned up for this
2397 service.
</para></listitem>
2401 <term><varname>UtmpMode=
</varname></term>
2403 <listitem><para>Takes one of
<literal>init
</literal>,
<literal>login
</literal> or
<literal>user
</literal>. If
2404 <varname>UtmpIdentifier=
</varname> is set, controls which type of
<citerefentry
2405 project='man-pages'
><refentrytitle>utmp
</refentrytitle><manvolnum>5</manvolnum></citerefentry>/wtmp entries
2406 for this service are generated. This setting has no effect unless
<varname>UtmpIdentifier=
</varname> is set
2407 too. If
<literal>init
</literal> is set, only an
<constant>INIT_PROCESS
</constant> entry is generated and the
2408 invoked process must implement a
<command>getty
</command>-compatible utmp/wtmp logic. If
2409 <literal>login
</literal> is set, first an
<constant>INIT_PROCESS
</constant> entry, followed by a
2410 <constant>LOGIN_PROCESS
</constant> entry is generated. In this case, the invoked process must implement a
2412 project='die-net'
><refentrytitle>login
</refentrytitle><manvolnum>1</manvolnum></citerefentry>-compatible
2413 utmp/wtmp logic. If
<literal>user
</literal> is set, first an
<constant>INIT_PROCESS
</constant> entry, then a
2414 <constant>LOGIN_PROCESS
</constant> entry and finally a
<constant>USER_PROCESS
</constant> entry is
2415 generated. In this case, the invoked process may be any process that is suitable to be run as session
2416 leader. Defaults to
<literal>init
</literal>.
</para></listitem>
2423 <title>Environment variables in spawned processes
</title>
2425 <para>Processes started by the service manager are executed with an environment variable block assembled from
2426 multiple sources. Processes started by the system service manager generally do not inherit environment variables
2427 set for the service manager itself (but this may be altered via
<varname>PassEnvironment=
</varname>), but processes
2428 started by the user service manager instances generally do inherit all environment variables set for the service
2429 manager itself.
</para>
2431 <para>For each invoked process the list of environment variables set is compiled from the following sources:
</para>
2434 <listitem><para>Variables globally configured for the service manager, using the
2435 <varname>DefaultEnvironment=
</varname> setting in
2436 <citerefentry><refentrytitle>systemd-system.conf
</refentrytitle><manvolnum>5</manvolnum></citerefentry>, the kernel command line option
<varname>systemd.setenv=
</varname> (see
2437 <citerefentry><refentrytitle>systemd
</refentrytitle><manvolnum>1</manvolnum></citerefentry>) or via
2438 <command>systemctl set-environment
</command> (see
<citerefentry><refentrytitle>systemctl
</refentrytitle><manvolnum>1</manvolnum></citerefentry>).
</para></listitem>
2440 <listitem><para>Variables defined by the service manager itself (see the list below)
</para></listitem>
2442 <listitem><para>Variables set in the service manager's own environment variable block (subject to
<varname>PassEnvironment=
</varname> for the system service manager)
</para></listitem>
2444 <listitem><para>Variables set via
<varname>Environment=
</varname> in the unit file
</para></listitem>
2446 <listitem><para>Variables read from files specified via
<varname>EnvironmentFile=
</varname> in the unit file
</para></listitem>
2448 <listitem><para>Variables set by any PAM modules in case
<varname>PAMName=
</varname> is in effect,
2450 project='man-pages'
><refentrytitle>pam_env
</refentrytitle><manvolnum>8</manvolnum></citerefentry></para></listitem>
2453 <para>If the same environment variables are set by multiple of these sources, the later source — according to the
2454 order of the list above — wins. Note that as final step all variables listed in
2455 <varname>UnsetEnvironment=
</varname> are removed again from the compiled environment variable list, immediately
2456 before it is passed to the executed process.
</para>
2458 <para>The following select environment variables are set or propagated by the service manager for each invoked
2461 <variablelist class='environment-variables'
>
2463 <term><varname>$PATH
</varname></term>
2465 <listitem><para>Colon-separated list of directories to use when launching
2466 executables.
<command>systemd
</command> uses a fixed value of
2467 <literal><filename>/usr/local/sbin
</filename>:
<filename>/usr/local/bin
</filename>:
<filename>/usr/sbin
</filename>:
<filename>/usr/bin
</filename></literal>
2468 in the system manager. When compiled for systems with
"unmerged /usr" (
<filename>/bin
</filename> is
2469 not a symlink to
<filename>/usr/bin
</filename>),
2470 <literal>:
<filename>/sbin
</filename>:
<filename>/bin
</filename></literal> is appended. In case of the
2471 the user manager, a different path may be configured by the distribution. It is recommended to not
2472 rely on the order of entries, and have only one program with a given name in
2473 <varname>$PATH
</varname>.
</para></listitem>
2477 <term><varname>$LANG
</varname></term>
2479 <listitem><para>Locale. Can be set in
2480 <citerefentry project='man-pages'
><refentrytitle>locale.conf
</refentrytitle><manvolnum>5</manvolnum></citerefentry>
2481 or on the kernel command line (see
2482 <citerefentry><refentrytitle>systemd
</refentrytitle><manvolnum>1</manvolnum></citerefentry>
2484 <citerefentry><refentrytitle>kernel-command-line
</refentrytitle><manvolnum>7</manvolnum></citerefentry>).
2489 <term><varname>$USER
</varname></term>
2490 <term><varname>$LOGNAME
</varname></term>
2491 <term><varname>$HOME
</varname></term>
2492 <term><varname>$SHELL
</varname></term>
2494 <listitem><para>User name (twice), home directory, and the
2495 login shell. The variables are set for the units that have
2496 <varname>User=
</varname> set, which includes user
2497 <command>systemd
</command> instances. See
2498 <citerefentry project='die-net'
><refentrytitle>passwd
</refentrytitle><manvolnum>5</manvolnum></citerefentry>.
2503 <term><varname>$INVOCATION_ID
</varname></term>
2505 <listitem><para>Contains a randomized, unique
128bit ID identifying each runtime cycle of the unit, formatted
2506 as
32 character hexadecimal string. A new ID is assigned each time the unit changes from an inactive state into
2507 an activating or active state, and may be used to identify this specific runtime cycle, in particular in data
2508 stored offline, such as the journal. The same ID is passed to all processes run as part of the
2509 unit.
</para></listitem>
2513 <term><varname>$XDG_RUNTIME_DIR
</varname></term>
2515 <listitem><para>The directory to use for runtime objects (such as IPC objects) and volatile state. Set for all
2516 services run by the user
<command>systemd
</command> instance, as well as any system services that use
2517 <varname>PAMName=
</varname> with a PAM stack that includes
<command>pam_systemd
</command>. See below and
2518 <citerefentry><refentrytitle>pam_systemd
</refentrytitle><manvolnum>8</manvolnum></citerefentry> for more
2519 information.
</para></listitem>
2523 <term><varname>$RUNTIME_DIRECTORY
</varname></term>
2524 <term><varname>$STATE_DIRECTORY
</varname></term>
2525 <term><varname>$CACHE_DIRECTORY
</varname></term>
2526 <term><varname>$LOGS_DIRECTORY
</varname></term>
2527 <term><varname>$CONFIGURATION_DIRECTORY
</varname></term>
2529 <listitem><para>Contains and absolute paths to the directories defined with
2530 <varname>RuntimeDirectory=
</varname>,
<varname>StateDirectory=
</varname>,
2531 <varname>CacheDirectory=
</varname>,
<varname>LogsDirectory=
</varname>, and
2532 <varname>ConfigurationDirectory=
</varname> when those settings are used.
</para>
2537 <term><varname>$MAINPID
</varname></term>
2539 <listitem><para>The PID of the unit's main process if it is
2540 known. This is only set for control processes as invoked by
2541 <varname>ExecReload=
</varname> and similar.
</para></listitem>
2545 <term><varname>$MANAGERPID
</varname></term>
2547 <listitem><para>The PID of the user
<command>systemd
</command>
2548 instance, set for processes spawned by it.
</para></listitem>
2552 <term><varname>$LISTEN_FDS
</varname></term>
2553 <term><varname>$LISTEN_PID
</varname></term>
2554 <term><varname>$LISTEN_FDNAMES
</varname></term>
2556 <listitem><para>Information about file descriptors passed to a
2557 service for socket activation. See
2558 <citerefentry><refentrytitle>sd_listen_fds
</refentrytitle><manvolnum>3</manvolnum></citerefentry>.
2563 <term><varname>$NOTIFY_SOCKET
</varname></term>
2565 <listitem><para>The socket
2566 <function>sd_notify()
</function> talks to. See
2567 <citerefentry><refentrytitle>sd_notify
</refentrytitle><manvolnum>3</manvolnum></citerefentry>.
2572 <term><varname>$WATCHDOG_PID
</varname></term>
2573 <term><varname>$WATCHDOG_USEC
</varname></term>
2575 <listitem><para>Information about watchdog keep-alive notifications. See
2576 <citerefentry><refentrytitle>sd_watchdog_enabled
</refentrytitle><manvolnum>3</manvolnum></citerefentry>.
2581 <term><varname>$TERM
</varname></term>
2583 <listitem><para>Terminal type, set only for units connected to
2584 a terminal (
<varname>StandardInput=tty
</varname>,
2585 <varname>StandardOutput=tty
</varname>, or
2586 <varname>StandardError=tty
</varname>). See
2587 <citerefentry project='man-pages'
><refentrytitle>termcap
</refentrytitle><manvolnum>5</manvolnum></citerefentry>.
2592 <term><varname>$JOURNAL_STREAM
</varname></term>
2594 <listitem><para>If the standard output or standard error output of the executed processes are connected to the
2595 journal (for example, by setting
<varname>StandardError=journal
</varname>)
<varname>$JOURNAL_STREAM
</varname>
2596 contains the device and inode numbers of the connection file descriptor, formatted in decimal, separated by a
2597 colon (
<literal>:
</literal>). This permits invoked processes to safely detect whether their standard output or
2598 standard error output are connected to the journal. The device and inode numbers of the file descriptors should
2599 be compared with the values set in the environment variable to determine whether the process output is still
2600 connected to the journal. Note that it is generally not sufficient to only check whether
2601 <varname>$JOURNAL_STREAM
</varname> is set at all as services might invoke external processes replacing their
2602 standard output or standard error output, without unsetting the environment variable.
</para>
2604 <para>If both standard output and standard error of the executed processes are connected to the journal via a
2605 stream socket, this environment variable will contain information about the standard error stream, as that's
2606 usually the preferred destination for log data. (Note that typically the same stream is used for both standard
2607 output and standard error, hence very likely the environment variable contains device and inode information
2608 matching both stream file descriptors.)
</para>
2610 <para>This environment variable is primarily useful to allow services to optionally upgrade their used log
2611 protocol to the native journal protocol (using
2612 <citerefentry><refentrytitle>sd_journal_print
</refentrytitle><manvolnum>3</manvolnum></citerefentry> and other
2613 functions) if their standard output or standard error output is connected to the journal anyway, thus enabling
2614 delivery of structured metadata along with logged messages.
</para></listitem>
2618 <term><varname>$SERVICE_RESULT
</varname></term>
2620 <listitem><para>Only defined for the service unit type, this environment variable is passed to all
2621 <varname>ExecStop=
</varname> and
<varname>ExecStopPost=
</varname> processes, and encodes the service
2622 "result". Currently, the following values are defined:
</para>
2625 <title>Defined
<varname>$SERVICE_RESULT
</varname> values
</title>
2627 <colspec colname='result'
/>
2628 <colspec colname='meaning'
/>
2631 <entry>Value
</entry>
2632 <entry>Meaning
</entry>
2638 <entry><literal>success
</literal></entry>
2639 <entry>The service ran successfully and exited cleanly.
</entry>
2642 <entry><literal>protocol
</literal></entry>
2643 <entry>A protocol violation occurred: the service did not take the steps required by its unit configuration (specifically what is configured in its
<varname>Type=
</varname> setting).
</entry>
2646 <entry><literal>timeout
</literal></entry>
2647 <entry>One of the steps timed out.
</entry>
2650 <entry><literal>exit-code
</literal></entry>
2651 <entry>Service process exited with a non-zero exit code; see
<varname>$EXIT_CODE
</varname> below for the actual exit code returned.
</entry>
2654 <entry><literal>signal
</literal></entry>
2655 <entry>A service process was terminated abnormally by a signal, without dumping core. See
<varname>$EXIT_CODE
</varname> below for the actual signal causing the termination.
</entry>
2658 <entry><literal>core-dump
</literal></entry>
2659 <entry>A service process terminated abnormally with a signal and dumped core. See
<varname>$EXIT_CODE
</varname> below for the signal causing the termination.
</entry>
2662 <entry><literal>watchdog
</literal></entry>
2663 <entry>Watchdog keep-alive ping was enabled for the service, but the deadline was missed.
</entry>
2666 <entry><literal>start-limit-hit
</literal></entry>
2667 <entry>A start limit was defined for the unit and it was hit, causing the unit to fail to start. See
<citerefentry><refentrytitle>systemd.unit
</refentrytitle><manvolnum>5</manvolnum></citerefentry>'s
<varname>StartLimitIntervalSec=
</varname> and
<varname>StartLimitBurst=
</varname> for details.
</entry>
2670 <entry><literal>resources
</literal></entry>
2671 <entry>A catch-all condition in case a system operation failed.
</entry>
2677 <para>This environment variable is useful to monitor failure or successful termination of a service. Even
2678 though this variable is available in both
<varname>ExecStop=
</varname> and
<varname>ExecStopPost=
</varname>, it
2679 is usually a better choice to place monitoring tools in the latter, as the former is only invoked for services
2680 that managed to start up correctly, and the latter covers both services that failed during their start-up and
2681 those which failed during their runtime.
</para></listitem>
2685 <term><varname>$EXIT_CODE
</varname></term>
2686 <term><varname>$EXIT_STATUS
</varname></term>
2688 <listitem><para>Only defined for the service unit type, these environment variables are passed to all
2689 <varname>ExecStop=
</varname>,
<varname>ExecStopPost=
</varname> processes and contain exit status/code
2690 information of the main process of the service. For the precise definition of the exit code and status, see
2691 <citerefentry><refentrytitle>wait
</refentrytitle><manvolnum>2</manvolnum></citerefentry>.
<varname>$EXIT_CODE
</varname>
2692 is one of
<literal>exited
</literal>,
<literal>killed
</literal>,
2693 <literal>dumped
</literal>.
<varname>$EXIT_STATUS
</varname> contains the numeric exit code formatted as string
2694 if
<varname>$EXIT_CODE
</varname> is
<literal>exited
</literal>, and the signal name in all other cases. Note
2695 that these environment variables are only set if the service manager succeeded to start and identify the main
2696 process of the service.
</para>
2699 <title>Summary of possible service result variable values
</title>
2701 <colspec colname='result'
/>
2702 <colspec colname='code'
/>
2703 <colspec colname='status'
/>
2706 <entry><varname>$SERVICE_RESULT
</varname></entry>
2707 <entry><varname>$EXIT_CODE
</varname></entry>
2708 <entry><varname>$EXIT_STATUS
</varname></entry>
2714 <entry morerows=
"1" valign=
"top"><literal>success
</literal></entry>
2715 <entry valign=
"top"><literal>killed
</literal></entry>
2716 <entry><literal>HUP
</literal>,
<literal>INT
</literal>,
<literal>TERM
</literal>,
<literal>PIPE
</literal></entry>
2719 <entry valign=
"top"><literal>exited
</literal></entry>
2720 <entry><literal>0</literal></entry>
2723 <entry morerows=
"1" valign=
"top"><literal>protocol
</literal></entry>
2724 <entry valign=
"top">not set
</entry>
2725 <entry>not set
</entry>
2728 <entry><literal>exited
</literal></entry>
2729 <entry><literal>0</literal></entry>
2732 <entry morerows=
"1" valign=
"top"><literal>timeout
</literal></entry>
2733 <entry valign=
"top"><literal>killed
</literal></entry>
2734 <entry><literal>TERM
</literal>,
<literal>KILL
</literal></entry>
2737 <entry valign=
"top"><literal>exited
</literal></entry>
2738 <entry><literal>0</literal>,
<literal>1</literal>,
<literal>2</literal>,
<literal
2739 >3</literal>, …,
<literal>255</literal></entry>
2742 <entry valign=
"top"><literal>exit-code
</literal></entry>
2743 <entry valign=
"top"><literal>exited
</literal></entry>
2744 <entry><literal>1</literal>,
<literal>2</literal>,
<literal
2745 >3</literal>, …,
<literal>255</literal></entry>
2748 <entry valign=
"top"><literal>signal
</literal></entry>
2749 <entry valign=
"top"><literal>killed
</literal></entry>
2750 <entry><literal>HUP
</literal>,
<literal>INT
</literal>,
<literal>KILL
</literal>, …
</entry>
2753 <entry valign=
"top"><literal>core-dump
</literal></entry>
2754 <entry valign=
"top"><literal>dumped
</literal></entry>
2755 <entry><literal>ABRT
</literal>,
<literal>SEGV
</literal>,
<literal>QUIT
</literal>, …
</entry>
2758 <entry morerows=
"2" valign=
"top"><literal>watchdog
</literal></entry>
2759 <entry><literal>dumped
</literal></entry>
2760 <entry><literal>ABRT
</literal></entry>
2763 <entry><literal>killed
</literal></entry>
2764 <entry><literal>TERM
</literal>,
<literal>KILL
</literal></entry>
2767 <entry><literal>exited
</literal></entry>
2768 <entry><literal>0</literal>,
<literal>1</literal>,
<literal>2</literal>,
<literal
2769 >3</literal>, …,
<literal>255</literal></entry>
2772 <entry valign=
"top"><literal>exec-condition
</literal></entry>
2773 <entry><literal>exited
</literal></entry>
2774 <entry><literal>1</literal>,
<literal>2</literal>,
<literal>3</literal>,
<literal
2775 >4</literal>, …,
<literal>254</literal></entry>
2778 <entry valign=
"top"><literal>oom-kill
</literal></entry>
2779 <entry valign=
"top"><literal>killed
</literal></entry>
2780 <entry><literal>TERM
</literal>,
<literal>KILL
</literal></entry>
2783 <entry><literal>start-limit-hit
</literal></entry>
2784 <entry>not set
</entry>
2785 <entry>not set
</entry>
2788 <entry><literal>resources
</literal></entry>
2789 <entry>any of the above
</entry>
2790 <entry>any of the above
</entry>
2793 <entry namest=
"results" nameend=
"status">Note: the process may be also terminated by a signal not sent by systemd. In particular the process may send an arbitrary signal to itself in a handler for any of the non-maskable signals. Nevertheless, in the
<literal>timeout
</literal> and
<literal>watchdog
</literal> rows above only the signals that systemd sends have been included. Moreover, using
<varname>SuccessExitStatus=
</varname> additional exit statuses may be declared to indicate clean termination, which is not reflected by this table.
</entry>
2803 <term><varname>$PIDFILE
</varname></term>
2805 <listitem><para>The path to the configured PID file, in case the process is forked off on behalf of a
2806 service that uses the
<varname>PIDFile=
</varname> setting, see
2807 <citerefentry><refentrytitle>systemd.service
</refentrytitle><manvolnum>5</manvolnum></citerefentry>
2808 for details. Service code may use this environment variable to automatically generate a PID file at
2809 the location configured in the unit file. This field is set to an absolute path in the file
2810 system.
</para></listitem>
2815 <para>For system services, when
<varname>PAMName=
</varname> is enabled and
<command>pam_systemd
</command> is part
2816 of the selected PAM stack, additional environment variables defined by systemd may be set for
2817 services. Specifically, these are
<varname>$XDG_SEAT
</varname>,
<varname>$XDG_VTNR
</varname>, see
2818 <citerefentry><refentrytitle>pam_systemd
</refentrytitle><manvolnum>8</manvolnum></citerefentry> for details.
</para>
2822 <title>Process exit codes
</title>
2824 <para>When invoking a unit process the service manager possibly fails to apply the execution parameters configured
2825 with the settings above. In that case the already created service process will exit with a non-zero exit code
2826 before the configured command line is executed. (Or in other words, the child process possibly exits with these
2827 error codes, after having been created by the
<citerefentry
2828 project='man-pages'
><refentrytitle>fork
</refentrytitle><manvolnum>2</manvolnum></citerefentry> system call, but
2829 before the matching
<citerefentry
2830 project='man-pages'
><refentrytitle>execve
</refentrytitle><manvolnum>2</manvolnum></citerefentry> system call is
2831 called.) Specifically, exit codes defined by the C library, by the LSB specification and by the systemd service
2832 manager itself are used.
</para>
2834 <para>The following basic service exit codes are defined by the C library.
</para>
2837 <title>Basic C library exit codes
</title>
2841 <entry>Exit Code
</entry>
2842 <entry>Symbolic Name
</entry>
2843 <entry>Description
</entry>
2849 <entry><constant>EXIT_SUCCESS
</constant></entry>
2850 <entry>Generic success code.
</entry>
2854 <entry><constant>EXIT_FAILURE
</constant></entry>
2855 <entry>Generic failure or unspecified error.
</entry>
2861 <para>The following service exit codes are defined by the
<ulink
2862 url=
"https://refspecs.linuxbase.org/LSB_5.0.0/LSB-Core-generic/LSB-Core-generic/iniscrptact.html">LSB specification
</ulink>.
2866 <title>LSB service exit codes
</title>
2870 <entry>Exit Code
</entry>
2871 <entry>Symbolic Name
</entry>
2872 <entry>Description
</entry>
2878 <entry><constant>EXIT_INVALIDARGUMENT
</constant></entry>
2879 <entry>Invalid or excess arguments.
</entry>
2883 <entry><constant>EXIT_NOTIMPLEMENTED
</constant></entry>
2884 <entry>Unimplemented feature.
</entry>
2888 <entry><constant>EXIT_NOPERMISSION
</constant></entry>
2889 <entry>The user has insufficient privileges.
</entry>
2893 <entry><constant>EXIT_NOTINSTALLED
</constant></entry>
2894 <entry>The program is not installed.
</entry>
2898 <entry><constant>EXIT_NOTCONFIGURED
</constant></entry>
2899 <entry>The program is not configured.
</entry>
2903 <entry><constant>EXIT_NOTRUNNING
</constant></entry>
2904 <entry>The program is not running.
</entry>
2911 The LSB specification suggests that error codes
200 and above are reserved for implementations. Some of them are
2912 used by the service manager to indicate problems during process invocation:
2915 <title>systemd-specific exit codes
</title>
2919 <entry>Exit Code
</entry>
2920 <entry>Symbolic Name
</entry>
2921 <entry>Description
</entry>
2927 <entry><constant>EXIT_CHDIR
</constant></entry>
2928 <entry>Changing to the requested working directory failed. See
<varname>WorkingDirectory=
</varname> above.
</entry>
2932 <entry><constant>EXIT_NICE
</constant></entry>
2933 <entry>Failed to set up process scheduling priority (nice level). See
<varname>Nice=
</varname> above.
</entry>
2937 <entry><constant>EXIT_FDS
</constant></entry>
2938 <entry>Failed to close unwanted file descriptors, or to adjust passed file descriptors.
</entry>
2942 <entry><constant>EXIT_EXEC
</constant></entry>
2943 <entry>The actual process execution failed (specifically, the
<citerefentry project='man-pages'
><refentrytitle>execve
</refentrytitle><manvolnum>2</manvolnum></citerefentry> system call). Most likely this is caused by a missing or non-accessible executable file.
</entry>
2947 <entry><constant>EXIT_MEMORY
</constant></entry>
2948 <entry>Failed to perform an action due to memory shortage.
</entry>
2952 <entry><constant>EXIT_LIMITS
</constant></entry>
2953 <entry>Failed to adjust resource limits. See
<varname>LimitCPU=
</varname> and related settings above.
</entry>
2957 <entry><constant>EXIT_OOM_ADJUST
</constant></entry>
2958 <entry>Failed to adjust the OOM setting. See
<varname>OOMScoreAdjust=
</varname> above.
</entry>
2962 <entry><constant>EXIT_SIGNAL_MASK
</constant></entry>
2963 <entry>Failed to set process signal mask.
</entry>
2967 <entry><constant>EXIT_STDIN
</constant></entry>
2968 <entry>Failed to set up standard input. See
<varname>StandardInput=
</varname> above.
</entry>
2972 <entry><constant>EXIT_STDOUT
</constant></entry>
2973 <entry>Failed to set up standard output. See
<varname>StandardOutput=
</varname> above.
</entry>
2977 <entry><constant>EXIT_CHROOT
</constant></entry>
2978 <entry>Failed to change root directory (
<citerefentry project='man-pages'
><refentrytitle>chroot
</refentrytitle><manvolnum>2</manvolnum></citerefentry>). See
<varname>RootDirectory=
</varname>/
<varname>RootImage=
</varname> above.
</entry>
2982 <entry><constant>EXIT_IOPRIO
</constant></entry>
2983 <entry>Failed to set up IO scheduling priority. See
<varname>IOSchedulingClass=
</varname>/
<varname>IOSchedulingPriority=
</varname> above.
</entry>
2987 <entry><constant>EXIT_TIMERSLACK
</constant></entry>
2988 <entry>Failed to set up timer slack. See
<varname>TimerSlackNSec=
</varname> above.
</entry>
2992 <entry><constant>EXIT_SECUREBITS
</constant></entry>
2993 <entry>Failed to set process secure bits. See
<varname>SecureBits=
</varname> above.
</entry>
2997 <entry><constant>EXIT_SETSCHEDULER
</constant></entry>
2998 <entry>Failed to set up CPU scheduling. See
<varname>CPUSchedulingPolicy=
</varname>/
<varname>CPUSchedulingPriority=
</varname> above.
</entry>
3002 <entry><constant>EXIT_CPUAFFINITY
</constant></entry>
3003 <entry>Failed to set up CPU affinity. See
<varname>CPUAffinity=
</varname> above.
</entry>
3007 <entry><constant>EXIT_GROUP
</constant></entry>
3008 <entry>Failed to determine or change group credentials. See
<varname>Group=
</varname>/
<varname>SupplementaryGroups=
</varname> above.
</entry>
3012 <entry><constant>EXIT_USER
</constant></entry>
3013 <entry>Failed to determine or change user credentials, or to set up user namespacing. See
<varname>User=
</varname>/
<varname>PrivateUsers=
</varname> above.
</entry>
3017 <entry><constant>EXIT_CAPABILITIES
</constant></entry>
3018 <entry>Failed to drop capabilities, or apply ambient capabilities. See
<varname>CapabilityBoundingSet=
</varname>/
<varname>AmbientCapabilities=
</varname> above.
</entry>
3022 <entry><constant>EXIT_CGROUP
</constant></entry>
3023 <entry>Setting up the service control group failed.
</entry>
3027 <entry><constant>EXIT_SETSID
</constant></entry>
3028 <entry>Failed to create new process session.
</entry>
3032 <entry><constant>EXIT_CONFIRM
</constant></entry>
3033 <entry>Execution has been cancelled by the user. See the
<varname>systemd.confirm_spawn=
</varname> kernel command line setting on
<citerefentry><refentrytitle>kernel-command-line
</refentrytitle><manvolnum>7</manvolnum></citerefentry> for details.
</entry>
3037 <entry><constant>EXIT_STDERR
</constant></entry>
3038 <entry>Failed to set up standard error output. See
<varname>StandardError=
</varname> above.
</entry>
3042 <entry><constant>EXIT_PAM
</constant></entry>
3043 <entry>Failed to set up PAM session. See
<varname>PAMName=
</varname> above.
</entry>
3047 <entry><constant>EXIT_NETWORK
</constant></entry>
3048 <entry>Failed to set up network namespacing. See
<varname>PrivateNetwork=
</varname> above.
</entry>
3052 <entry><constant>EXIT_NAMESPACE
</constant></entry>
3053 <entry>Failed to set up mount namespacing. See
<varname>ReadOnlyPaths=
</varname> and related settings above.
</entry>
3057 <entry><constant>EXIT_NO_NEW_PRIVILEGES
</constant></entry>
3058 <entry>Failed to disable new privileges. See
<varname>NoNewPrivileges=yes
</varname> above.
</entry>
3062 <entry><constant>EXIT_SECCOMP
</constant></entry>
3063 <entry>Failed to apply system call filters. See
<varname>SystemCallFilter=
</varname> and related settings above.
</entry>
3067 <entry><constant>EXIT_SELINUX_CONTEXT
</constant></entry>
3068 <entry>Determining or changing SELinux context failed. See
<varname>SELinuxContext=
</varname> above.
</entry>
3072 <entry><constant>EXIT_PERSONALITY
</constant></entry>
3073 <entry>Failed to set up an execution domain (personality). See
<varname>Personality=
</varname> above.
</entry>
3077 <entry><constant>EXIT_APPARMOR_PROFILE
</constant></entry>
3078 <entry>Failed to prepare changing AppArmor profile. See
<varname>AppArmorProfile=
</varname> above.
</entry>
3082 <entry><constant>EXIT_ADDRESS_FAMILIES
</constant></entry>
3083 <entry>Failed to restrict address families. See
<varname>RestrictAddressFamilies=
</varname> above.
</entry>
3087 <entry><constant>EXIT_RUNTIME_DIRECTORY
</constant></entry>
3088 <entry>Setting up runtime directory failed. See
<varname>RuntimeDirectory=
</varname> and related settings above.
</entry>
3092 <entry><constant>EXIT_CHOWN
</constant></entry>
3093 <entry>Failed to adjust socket ownership. Used for socket units only.
</entry>
3097 <entry><constant>EXIT_SMACK_PROCESS_LABEL
</constant></entry>
3098 <entry>Failed to set SMACK label. See
<varname>SmackProcessLabel=
</varname> above.
</entry>
3102 <entry><constant>EXIT_KEYRING
</constant></entry>
3103 <entry>Failed to set up kernel keyring.
</entry>
3107 <entry><constant>EXIT_STATE_DIRECTORY
</constant></entry>
3108 <entry>Failed to set up unit's state directory. See
<varname>StateDirectory=
</varname> above.
</entry>
3112 <entry><constant>EXIT_CACHE_DIRECTORY
</constant></entry>
3113 <entry>Failed to set up unit's cache directory. See
<varname>CacheDirectory=
</varname> above.
</entry>
3117 <entry><constant>EXIT_LOGS_DIRECTORY
</constant></entry>
3118 <entry>Failed to set up unit's logging directory. See
<varname>LogsDirectory=
</varname> above.
</entry>
3122 <entry><constant>EXIT_CONFIGURATION_DIRECTORY
</constant></entry>
3123 <entry>Failed to set up unit's configuration directory. See
<varname>ConfigurationDirectory=
</varname> above.
</entry>
3127 <entry><constant>EXIT_NUMA_POLICY
</constant></entry>
3128 <entry>Failed to set up unit's NUMA memory policy. See
<varname>NUMAPolicy=
</varname> and
<varname>NUMAMask=
</varname>above.
</entry>
3135 <para>Finally, the BSD operating systems define a set of exit codes, typically defined on Linux systems too:
</para>
3138 <title>BSD exit codes
</title>
3142 <entry>Exit Code
</entry>
3143 <entry>Symbolic Name
</entry>
3144 <entry>Description
</entry>
3150 <entry><constant>EX_USAGE
</constant></entry>
3151 <entry>Command line usage error
</entry>
3155 <entry><constant>EX_DATAERR
</constant></entry>
3156 <entry>Data format error
</entry>
3160 <entry><constant>EX_NOINPUT
</constant></entry>
3161 <entry>Cannot open input
</entry>
3165 <entry><constant>EX_NOUSER
</constant></entry>
3166 <entry>Addressee unknown
</entry>
3170 <entry><constant>EX_NOHOST
</constant></entry>
3171 <entry>Host name unknown
</entry>
3175 <entry><constant>EX_UNAVAILABLE
</constant></entry>
3176 <entry>Service unavailable
</entry>
3180 <entry><constant>EX_SOFTWARE
</constant></entry>
3181 <entry>internal software error
</entry>
3185 <entry><constant>EX_OSERR
</constant></entry>
3186 <entry>System error (e.g., can't fork)
</entry>
3190 <entry><constant>EX_OSFILE
</constant></entry>
3191 <entry>Critical OS file missing
</entry>
3195 <entry><constant>EX_CANTCREAT
</constant></entry>
3196 <entry>Can't create (user) output file
</entry>
3200 <entry><constant>EX_IOERR
</constant></entry>
3201 <entry>Input/output error
</entry>
3205 <entry><constant>EX_TEMPFAIL
</constant></entry>
3206 <entry>Temporary failure; user is invited to retry
</entry>
3210 <entry><constant>EX_PROTOCOL
</constant></entry>
3211 <entry>Remote error in protocol
</entry>
3215 <entry><constant>EX_NOPERM
</constant></entry>
3216 <entry>Permission denied
</entry>
3220 <entry><constant>EX_CONFIG
</constant></entry>
3221 <entry>Configuration error
</entry>
3229 <title>See Also
</title>
3231 <citerefentry><refentrytitle>systemd
</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
3232 <citerefentry><refentrytitle>systemctl
</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
3233 <citerefentry><refentrytitle>systemd-analyze
</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
3234 <citerefentry><refentrytitle>journalctl
</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
3235 <citerefentry><refentrytitle>systemd-system.conf
</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
3236 <citerefentry><refentrytitle>systemd.unit
</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
3237 <citerefentry><refentrytitle>systemd.service
</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
3238 <citerefentry><refentrytitle>systemd.socket
</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
3239 <citerefentry><refentrytitle>systemd.swap
</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
3240 <citerefentry><refentrytitle>systemd.mount
</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
3241 <citerefentry><refentrytitle>systemd.kill
</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
3242 <citerefentry><refentrytitle>systemd.resource-control
</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
3243 <citerefentry><refentrytitle>systemd.time
</refentrytitle><manvolnum>7</manvolnum></citerefentry>,
3244 <citerefentry><refentrytitle>systemd.directives
</refentrytitle><manvolnum>7</manvolnum></citerefentry>,
3245 <citerefentry><refentrytitle>tmpfiles.d
</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
3246 <citerefentry project='man-pages'
><refentrytitle>exec
</refentrytitle><manvolnum>3</manvolnum></citerefentry>
projects / systemd.git / blob