net/Kconfig

   1 #
   2 # Network configuration
   3 #
   4
   5 menuconfig NET
   6         bool "Networking support"
   7         select NLATTR
   8         select GENERIC_NET_UTILS
   9         select BPF
  10         ---help---
  11           Unless you really know what you are doing, you should say Y here.
  12           The reason is that some programs need kernel networking support even
  13           when running on a stand-alone machine that isn't connected to any
  14           other computer.
  15
  16           If you are upgrading from an older kernel, you
  17           should consider updating your networking tools too because changes
  18           in the kernel and the tools often go hand in hand. The tools are
  19           contained in the package net-tools, the location and version number
  20           of which are given in <file:Documentation/Changes>.
  21
  22           For a general introduction to Linux networking, it is highly
  23           recommended to read the NET-HOWTO, available from
  24           <http://www.tldp.org/docs.html#howto>.
  25
  26 if NET
  27
  28 config WANT_COMPAT_NETLINK_MESSAGES
  29         bool
  30         help
  31           This option can be selected by other options that need compat
  32           netlink messages.
  33
  34 config COMPAT_NETLINK_MESSAGES
  35         def_bool y
  36         depends on COMPAT
  37         depends on WEXT_CORE || WANT_COMPAT_NETLINK_MESSAGES
  38         help
  39           This option makes it possible to send different netlink messages
  40           to tasks depending on whether the task is a compat task or not. To
  41           achieve this, you need to set skb_shinfo(skb)->frag_list to the
  42           compat skb before sending the skb, the netlink code will sort out
  43           which message to actually pass to the task.
  44
  45           Newly written code should NEVER need this option but do
  46           compat-independent messages instead!
  47
  48 config NET_INGRESS
  49         bool
  50
  51 config NET_EGRESS
  52         bool
  53
  54 menu "Networking options"
  55
  56 source "net/packet/Kconfig"
  57 source "net/unix/Kconfig"
  58 source "net/xfrm/Kconfig"
  59 source "net/iucv/Kconfig"
  60
  61 config INET
  62         bool "TCP/IP networking"
  63         select CRYPTO
  64         select CRYPTO_AES
  65         ---help---
  66           These are the protocols used on the Internet and on most local
  67           Ethernets. It is highly recommended to say Y here (this will enlarge
  68           your kernel by about 400 KB), since some programs (e.g. the X window
  69           system) use TCP/IP even if your machine is not connected to any
  70           other computer. You will get the so-called loopback device which
  71           allows you to ping yourself (great fun, that!).
  72
  73           For an excellent introduction to Linux networking, please read the
  74           Linux Networking HOWTO, available from
  75           <http://www.tldp.org/docs.html#howto>.
  76
  77           If you say Y here and also to "/proc file system support" and
  78           "Sysctl support" below, you can change various aspects of the
  79           behavior of the TCP/IP code by writing to the (virtual) files in
  80           /proc/sys/net/ipv4/*; the options are explained in the file
  81           <file:Documentation/networking/ip-sysctl.txt>.
  82
  83           Short answer: say Y.
  84
  85 if INET
  86 source "net/ipv4/Kconfig"
  87 source "net/ipv6/Kconfig"
  88 source "net/netlabel/Kconfig"
  89
  90 endif # if INET
  91
  92 config NETWORK_SECMARK
  93         bool "Security Marking"
  94         help
  95           This enables security marking of network packets, similar
  96           to nfmark, but designated for security purposes.
  97           If you are unsure how to answer this question, answer N.
  98
  99 config NET_PTP_CLASSIFY
 100         def_bool n
 101
 102 config NETWORK_PHY_TIMESTAMPING
 103         bool "Timestamping in PHY devices"
 104         select NET_PTP_CLASSIFY
 105         help
 106           This allows timestamping of network packets by PHYs with
 107           hardware timestamping capabilities. This option adds some
 108           overhead in the transmit and receive paths.
 109
 110           If you are unsure how to answer this question, answer N.
 111
 112 menuconfig NETFILTER
 113         bool "Network packet filtering framework (Netfilter)"
 114         ---help---
 115           Netfilter is a framework for filtering and mangling network packets
 116           that pass through your Linux box.
 117
 118           The most common use of packet filtering is to run your Linux box as
 119           a firewall protecting a local network from the Internet. The type of
 120           firewall provided by this kernel support is called a "packet
 121           filter", which means that it can reject individual network packets
 122           based on type, source, destination etc. The other kind of firewall,
 123           a "proxy-based" one, is more secure but more intrusive and more
 124           bothersome to set up; it inspects the network traffic much more
 125           closely, modifies it and has knowledge about the higher level
 126           protocols, which a packet filter lacks. Moreover, proxy-based
 127           firewalls often require changes to the programs running on the local
 128           clients. Proxy-based firewalls don't need support by the kernel, but
 129           they are often combined with a packet filter, which only works if
 130           you say Y here.
 131
 132           You should also say Y here if you intend to use your Linux box as
 133           the gateway to the Internet for a local network of machines without
 134           globally valid IP addresses. This is called "masquerading": if one
 135           of the computers on your local network wants to send something to
 136           the outside, your box can "masquerade" as that computer, i.e. it
 137           forwards the traffic to the intended outside destination, but
 138           modifies the packets to make it look like they came from the
 139           firewall box itself. It works both ways: if the outside host
 140           replies, the Linux box will silently forward the traffic to the
 141           correct local computer. This way, the computers on your local net
 142           are completely invisible to the outside world, even though they can
 143           reach the outside and can receive replies. It is even possible to
 144           run globally visible servers from within a masqueraded local network
 145           using a mechanism called portforwarding. Masquerading is also often
 146           called NAT (Network Address Translation).
 147
 148           Another use of Netfilter is in transparent proxying: if a machine on
 149           the local network tries to connect to an outside host, your Linux
 150           box can transparently forward the traffic to a local server,
 151           typically a caching proxy server.
 152
 153           Yet another use of Netfilter is building a bridging firewall. Using
 154           a bridge with Network packet filtering enabled makes iptables "see"
 155           the bridged traffic. For filtering on the lower network and Ethernet
 156           protocols over the bridge, use ebtables (under bridge netfilter
 157           configuration).
 158
 159           Various modules exist for netfilter which replace the previous
 160           masquerading (ipmasqadm), packet filtering (ipchains), transparent
 161           proxying, and portforwarding mechanisms. Please see
 162           <file:Documentation/Changes> under "iptables" for the location of
 163           these packages.
 164
 165 if NETFILTER
 166
 167 config NETFILTER_DEBUG
 168         bool "Network packet filtering debugging"
 169         depends on NETFILTER
 170         help
 171           You can say Y here if you want to get additional messages useful in
 172           debugging the netfilter code.
 173
 174 config NETFILTER_ADVANCED
 175         bool "Advanced netfilter configuration"
 176         depends on NETFILTER
 177         default y
 178         help
 179           If you say Y here you can select between all the netfilter modules.
 180           If you say N the more unusual ones will not be shown and the
 181           basic ones needed by most people will default to 'M'.
 182
 183           If unsure, say Y.
 184
 185 config BRIDGE_NETFILTER
 186         tristate "Bridged IP/ARP packets filtering"
 187         depends on BRIDGE
 188         depends on NETFILTER && INET
 189         depends on NETFILTER_ADVANCED
 190         default m
 191         ---help---
 192           Enabling this option will let arptables resp. iptables see bridged
 193           ARP resp. IP traffic. If you want a bridging firewall, you probably
 194           want this option enabled.
 195           Enabling or disabling this option doesn't enable or disable
 196           ebtables.
 197
 198           If unsure, say N.
 199
 200 source "net/netfilter/Kconfig"
 201 source "net/ipv4/netfilter/Kconfig"
 202 source "net/ipv6/netfilter/Kconfig"
 203 source "net/decnet/netfilter/Kconfig"
 204 source "net/bridge/netfilter/Kconfig"
 205
 206 endif
 207
 208 source "net/dccp/Kconfig"
 209 source "net/sctp/Kconfig"
 210 source "net/rds/Kconfig"
 211 source "net/tipc/Kconfig"
 212 source "net/atm/Kconfig"
 213 source "net/l2tp/Kconfig"
 214 source "net/802/Kconfig"
 215 source "net/bridge/Kconfig"
 216 source "net/dsa/Kconfig"
 217 source "net/8021q/Kconfig"
 218 source "net/decnet/Kconfig"
 219 source "net/llc/Kconfig"
 220 source "net/ipx/Kconfig"
 221 source "drivers/net/appletalk/Kconfig"
 222 source "net/x25/Kconfig"
 223 source "net/lapb/Kconfig"
 224 source "net/phonet/Kconfig"
 225 source "net/6lowpan/Kconfig"
 226 source "net/ieee802154/Kconfig"
 227 source "net/mac802154/Kconfig"
 228 source "net/sched/Kconfig"
 229 source "net/dcb/Kconfig"
 230 source "net/dns_resolver/Kconfig"
 231 source "net/batman-adv/Kconfig"
 232 source "net/openvswitch/Kconfig"
 233 source "net/vmw_vsock/Kconfig"
 234 source "net/netlink/Kconfig"
 235 source "net/mpls/Kconfig"
 236 source "net/hsr/Kconfig"
 237 source "net/switchdev/Kconfig"
 238 source "net/l3mdev/Kconfig"
 239 source "net/qrtr/Kconfig"
 240
 241 config RPS
 242         bool
 243         depends on SMP && SYSFS
 244         default y
 245
 246 config RFS_ACCEL
 247         bool
 248         depends on RPS
 249         select CPU_RMAP
 250         default y
 251
 252 config XPS
 253         bool
 254         depends on SMP
 255         default y
 256
 257 config HWBM
 258        bool
 259
 260 config SOCK_CGROUP_DATA
 261         bool
 262         default n
 263
 264 config CGROUP_NET_PRIO
 265         bool "Network priority cgroup"
 266         depends on CGROUPS
 267         select SOCK_CGROUP_DATA
 268         ---help---
 269           Cgroup subsystem for use in assigning processes to network priorities on
 270           a per-interface basis.
 271
 272 config CGROUP_NET_CLASSID
 273         bool "Network classid cgroup"
 274         depends on CGROUPS
 275         select SOCK_CGROUP_DATA
 276         ---help---
 277           Cgroup subsystem for use as general purpose socket classid marker that is
 278           being used in cls_cgroup and for netfilter matching.
 279
 280 config NET_RX_BUSY_POLL
 281         bool
 282         default y
 283
 284 config BQL
 285         bool
 286         depends on SYSFS
 287         select DQL
 288         default y
 289
 290 config BPF_JIT
 291         bool "enable BPF Just In Time compiler"
 292         depends on HAVE_CBPF_JIT || HAVE_EBPF_JIT
 293         depends on MODULES
 294         ---help---
 295           Berkeley Packet Filter filtering capabilities are normally handled
 296           by an interpreter. This option allows kernel to generate a native
 297           code when filter is loaded in memory. This should speedup
 298           packet sniffing (libpcap/tcpdump).
 299
 300           Note, admin should enable this feature changing:
 301           /proc/sys/net/core/bpf_jit_enable
 302           /proc/sys/net/core/bpf_jit_harden (optional)
 303
 304 config NET_FLOW_LIMIT
 305         bool
 306         depends on RPS
 307         default y
 308         ---help---
 309           The network stack has to drop packets when a receive processing CPU's
 310           backlog reaches netdev_max_backlog. If a few out of many active flows
 311           generate the vast majority of load, drop their traffic earlier to
 312           maintain capacity for the other flows. This feature provides servers
 313           with many clients some protection against DoS by a single (spoofed)
 314           flow that greatly exceeds average workload.
 315
 316 menu "Network testing"
 317
 318 config NET_PKTGEN
 319         tristate "Packet Generator (USE WITH CAUTION)"
 320         depends on INET && PROC_FS
 321         ---help---
 322           This module will inject preconfigured packets, at a configurable
 323           rate, out of a given interface.  It is used for network interface
 324           stress testing and performance analysis.  If you don't understand
 325           what was just said, you don't need it: say N.
 326
 327           Documentation on how to use the packet generator can be found
 328           at <file:Documentation/networking/pktgen.txt>.
 329
 330           To compile this code as a module, choose M here: the
 331           module will be called pktgen.
 332
 333 config NET_TCPPROBE
 334         tristate "TCP connection probing"
 335         depends on INET && PROC_FS && KPROBES
 336         ---help---
 337         This module allows for capturing the changes to TCP connection
 338         state in response to incoming packets. It is used for debugging
 339         TCP congestion avoidance modules. If you don't understand
 340         what was just said, you don't need it: say N.
 341
 342         Documentation on how to use TCP connection probing can be found
 343         at:
 344
 345           http://www.linuxfoundation.org/collaborate/workgroups/networking/tcpprobe
 346
 347         To compile this code as a module, choose M here: the
 348         module will be called tcp_probe.
 349
 350 config NET_DROP_MONITOR
 351         tristate "Network packet drop alerting service"
 352         depends on INET && TRACEPOINTS
 353         ---help---
 354         This feature provides an alerting service to userspace in the
 355         event that packets are discarded in the network stack.  Alerts
 356         are broadcast via netlink socket to any listening user space
 357         process.  If you don't need network drop alerts, or if you are ok
 358         just checking the various proc files and other utilities for
 359         drop statistics, say N here.
 360
 361 endmenu
 362
 363 endmenu
 364
 365 source "net/ax25/Kconfig"
 366 source "net/can/Kconfig"
 367 source "net/irda/Kconfig"
 368 source "net/bluetooth/Kconfig"
 369 source "net/rxrpc/Kconfig"
 370 source "net/kcm/Kconfig"
 371
 372 config FIB_RULES
 373         bool
 374
 375 menuconfig WIRELESS
 376         bool "Wireless"
 377         depends on !S390
 378         default y
 379
 380 if WIRELESS
 381
 382 source "net/wireless/Kconfig"
 383 source "net/mac80211/Kconfig"
 384
 385 endif # WIRELESS
 386
 387 source "net/wimax/Kconfig"
 388
 389 source "net/rfkill/Kconfig"
 390 source "net/9p/Kconfig"
 391 source "net/caif/Kconfig"
 392 source "net/ceph/Kconfig"
 393 source "net/nfc/Kconfig"
 394
 395 config LWTUNNEL
 396         bool "Network light weight tunnels"
 397         ---help---
 398           This feature provides an infrastructure to support light weight
 399           tunnels like mpls. There is no netdevice associated with a light
 400           weight tunnel endpoint. Tunnel encapsulation parameters are stored
 401           with light weight tunnel state associated with fib routes.
 402
 403 config DST_CACHE
 404         bool
 405         default n
 406
 407 config NET_DEVLINK
 408         tristate "Network physical/parent device Netlink interface"
 409         help
 410           Network physical/parent device Netlink interface provides
 411           infrastructure to support access to physical chip-wide config and
 412           monitoring.
 413
 414 config MAY_USE_DEVLINK
 415         tristate
 416         default m if NET_DEVLINK=m
 417         default y if NET_DEVLINK=y || NET_DEVLINK=n
 418         help
 419           Drivers using the devlink infrastructure should have a dependency
 420           on MAY_USE_DEVLINK to ensure they do not cause link errors when
 421           devlink is a loadable module and the driver using it is built-in.
 422
 423 endif   # if NET
 424
 425 # Used by archs to tell that they support BPF JIT compiler plus which flavour.
 426 # Only one of the two can be selected for a specific arch since eBPF JIT supersedes
 427 # the cBPF JIT.
 428
 429 # Classic BPF JIT (cBPF)
 430 config HAVE_CBPF_JIT
 431         bool
 432
 433 # Extended BPF JIT (eBPF)
 434 config HAVE_EBPF_JIT
 435         bool