net/Kconfig

   1 #
   2 # Network configuration
   3 #
   4
   5 menuconfig NET
   6         bool "Networking support"
   7         select NLATTR
   8         select GENERIC_NET_UTILS
   9         ---help---
  10           Unless you really know what you are doing, you should say Y here.
  11           The reason is that some programs need kernel networking support even
  12           when running on a stand-alone machine that isn't connected to any
  13           other computer.
  14
  15           If you are upgrading from an older kernel, you
  16           should consider updating your networking tools too because changes
  17           in the kernel and the tools often go hand in hand. The tools are
  18           contained in the package net-tools, the location and version number
  19           of which are given in <file:Documentation/Changes>.
  20
  21           For a general introduction to Linux networking, it is highly
  22           recommended to read the NET-HOWTO, available from
  23           <http://www.tldp.org/docs.html#howto>.
  24
  25 if NET
  26
  27 config WANT_COMPAT_NETLINK_MESSAGES
  28         bool
  29         help
  30           This option can be selected by other options that need compat
  31           netlink messages.
  32
  33 config COMPAT_NETLINK_MESSAGES
  34         def_bool y
  35         depends on COMPAT
  36         depends on WEXT_CORE || WANT_COMPAT_NETLINK_MESSAGES
  37         help
  38           This option makes it possible to send different netlink messages
  39           to tasks depending on whether the task is a compat task or not. To
  40           achieve this, you need to set skb_shinfo(skb)->frag_list to the
  41           compat skb before sending the skb, the netlink code will sort out
  42           which message to actually pass to the task.
  43
  44           Newly written code should NEVER need this option but do
  45           compat-independent messages instead!
  46
  47 menu "Networking options"
  48
  49 source "net/packet/Kconfig"
  50 source "net/unix/Kconfig"
  51 source "net/xfrm/Kconfig"
  52 source "net/iucv/Kconfig"
  53
  54 config INET
  55         bool "TCP/IP networking"
  56         select CRYPTO
  57         select CRYPTO_AES
  58         ---help---
  59           These are the protocols used on the Internet and on most local
  60           Ethernets. It is highly recommended to say Y here (this will enlarge
  61           your kernel by about 400 KB), since some programs (e.g. the X window
  62           system) use TCP/IP even if your machine is not connected to any
  63           other computer. You will get the so-called loopback device which
  64           allows you to ping yourself (great fun, that!).
  65
  66           For an excellent introduction to Linux networking, please read the
  67           Linux Networking HOWTO, available from
  68           <http://www.tldp.org/docs.html#howto>.
  69
  70           If you say Y here and also to "/proc file system support" and
  71           "Sysctl support" below, you can change various aspects of the
  72           behavior of the TCP/IP code by writing to the (virtual) files in
  73           /proc/sys/net/ipv4/*; the options are explained in the file
  74           <file:Documentation/networking/ip-sysctl.txt>.
  75
  76           Short answer: say Y.
  77
  78 if INET
  79 source "net/ipv4/Kconfig"
  80 source "net/ipv6/Kconfig"
  81 source "net/netlabel/Kconfig"
  82
  83 endif # if INET
  84
  85 config NETWORK_SECMARK
  86         bool "Security Marking"
  87         help
  88           This enables security marking of network packets, similar
  89           to nfmark, but designated for security purposes.
  90           If you are unsure how to answer this question, answer N.
  91
  92 config NET_PTP_CLASSIFY
  93         def_bool n
  94
  95 config NETWORK_PHY_TIMESTAMPING
  96         bool "Timestamping in PHY devices"
  97         select NET_PTP_CLASSIFY
  98         help
  99           This allows timestamping of network packets by PHYs with
 100           hardware timestamping capabilities. This option adds some
 101           overhead in the transmit and receive paths.
 102
 103           If you are unsure how to answer this question, answer N.
 104
 105 menuconfig NETFILTER
 106         bool "Network packet filtering framework (Netfilter)"
 107         ---help---
 108           Netfilter is a framework for filtering and mangling network packets
 109           that pass through your Linux box.
 110
 111           The most common use of packet filtering is to run your Linux box as
 112           a firewall protecting a local network from the Internet. The type of
 113           firewall provided by this kernel support is called a "packet
 114           filter", which means that it can reject individual network packets
 115           based on type, source, destination etc. The other kind of firewall,
 116           a "proxy-based" one, is more secure but more intrusive and more
 117           bothersome to set up; it inspects the network traffic much more
 118           closely, modifies it and has knowledge about the higher level
 119           protocols, which a packet filter lacks. Moreover, proxy-based
 120           firewalls often require changes to the programs running on the local
 121           clients. Proxy-based firewalls don't need support by the kernel, but
 122           they are often combined with a packet filter, which only works if
 123           you say Y here.
 124
 125           You should also say Y here if you intend to use your Linux box as
 126           the gateway to the Internet for a local network of machines without
 127           globally valid IP addresses. This is called "masquerading": if one
 128           of the computers on your local network wants to send something to
 129           the outside, your box can "masquerade" as that computer, i.e. it
 130           forwards the traffic to the intended outside destination, but
 131           modifies the packets to make it look like they came from the
 132           firewall box itself. It works both ways: if the outside host
 133           replies, the Linux box will silently forward the traffic to the
 134           correct local computer. This way, the computers on your local net
 135           are completely invisible to the outside world, even though they can
 136           reach the outside and can receive replies. It is even possible to
 137           run globally visible servers from within a masqueraded local network
 138           using a mechanism called portforwarding. Masquerading is also often
 139           called NAT (Network Address Translation).
 140
 141           Another use of Netfilter is in transparent proxying: if a machine on
 142           the local network tries to connect to an outside host, your Linux
 143           box can transparently forward the traffic to a local server,
 144           typically a caching proxy server.
 145
 146           Yet another use of Netfilter is building a bridging firewall. Using
 147           a bridge with Network packet filtering enabled makes iptables "see"
 148           the bridged traffic. For filtering on the lower network and Ethernet
 149           protocols over the bridge, use ebtables (under bridge netfilter
 150           configuration).
 151
 152           Various modules exist for netfilter which replace the previous
 153           masquerading (ipmasqadm), packet filtering (ipchains), transparent
 154           proxying, and portforwarding mechanisms. Please see
 155           <file:Documentation/Changes> under "iptables" for the location of
 156           these packages.
 157
 158 if NETFILTER
 159
 160 config NETFILTER_DEBUG
 161         bool "Network packet filtering debugging"
 162         depends on NETFILTER
 163         help
 164           You can say Y here if you want to get additional messages useful in
 165           debugging the netfilter code.
 166
 167 config NETFILTER_ADVANCED
 168         bool "Advanced netfilter configuration"
 169         depends on NETFILTER
 170         default y
 171         help
 172           If you say Y here you can select between all the netfilter modules.
 173           If you say N the more unusual ones will not be shown and the
 174           basic ones needed by most people will default to 'M'.
 175
 176           If unsure, say Y.
 177
 178 config BRIDGE_NETFILTER
 179         bool "Bridged IP/ARP packets filtering"
 180         depends on BRIDGE && NETFILTER && INET
 181         depends on NETFILTER_ADVANCED
 182         default y
 183         ---help---
 184           Enabling this option will let arptables resp. iptables see bridged
 185           ARP resp. IP traffic. If you want a bridging firewall, you probably
 186           want this option enabled.
 187           Enabling or disabling this option doesn't enable or disable
 188           ebtables.
 189
 190           If unsure, say N.
 191
 192 source "net/netfilter/Kconfig"
 193 source "net/ipv4/netfilter/Kconfig"
 194 source "net/ipv6/netfilter/Kconfig"
 195 source "net/decnet/netfilter/Kconfig"
 196 source "net/bridge/netfilter/Kconfig"
 197
 198 endif
 199
 200 source "net/dccp/Kconfig"
 201 source "net/sctp/Kconfig"
 202 source "net/rds/Kconfig"
 203 source "net/tipc/Kconfig"
 204 source "net/atm/Kconfig"
 205 source "net/l2tp/Kconfig"
 206 source "net/802/Kconfig"
 207 source "net/bridge/Kconfig"
 208 source "net/dsa/Kconfig"
 209 source "net/8021q/Kconfig"
 210 source "net/decnet/Kconfig"
 211 source "net/llc/Kconfig"
 212 source "net/ipx/Kconfig"
 213 source "drivers/net/appletalk/Kconfig"
 214 source "net/x25/Kconfig"
 215 source "net/lapb/Kconfig"
 216 source "net/phonet/Kconfig"
 217 source "net/ieee802154/Kconfig"
 218 source "net/mac802154/Kconfig"
 219 source "net/sched/Kconfig"
 220 source "net/dcb/Kconfig"
 221 source "net/dns_resolver/Kconfig"
 222 source "net/batman-adv/Kconfig"
 223 source "net/openvswitch/Kconfig"
 224 source "net/vmw_vsock/Kconfig"
 225 source "net/netlink/Kconfig"
 226 source "net/mpls/Kconfig"
 227 source "net/hsr/Kconfig"
 228
 229 config RPS
 230         boolean
 231         depends on SMP && SYSFS
 232         default y
 233
 234 config RFS_ACCEL
 235         boolean
 236         depends on RPS
 237         select CPU_RMAP
 238         default y
 239
 240 config XPS
 241         boolean
 242         depends on SMP
 243         default y
 244
 245 config CGROUP_NET_PRIO
 246         bool "Network priority cgroup"
 247         depends on CGROUPS
 248         ---help---
 249           Cgroup subsystem for use in assigning processes to network priorities on
 250           a per-interface basis.
 251
 252 config CGROUP_NET_CLASSID
 253         boolean "Network classid cgroup"
 254         depends on CGROUPS
 255         ---help---
 256           Cgroup subsystem for use as general purpose socket classid marker that is
 257           being used in cls_cgroup and for netfilter matching.
 258
 259 config NET_RX_BUSY_POLL
 260         boolean
 261         default y
 262
 263 config BQL
 264         boolean
 265         depends on SYSFS
 266         select DQL
 267         default y
 268
 269 config BPF_JIT
 270         bool "enable BPF Just In Time compiler"
 271         depends on HAVE_BPF_JIT
 272         depends on MODULES
 273         ---help---
 274           Berkeley Packet Filter filtering capabilities are normally handled
 275           by an interpreter. This option allows kernel to generate a native
 276           code when filter is loaded in memory. This should speedup
 277           packet sniffing (libpcap/tcpdump). Note : Admin should enable
 278           this feature changing /proc/sys/net/core/bpf_jit_enable
 279
 280 config NET_FLOW_LIMIT
 281         boolean
 282         depends on RPS
 283         default y
 284         ---help---
 285           The network stack has to drop packets when a receive processing CPU's
 286           backlog reaches netdev_max_backlog. If a few out of many active flows
 287           generate the vast majority of load, drop their traffic earlier to
 288           maintain capacity for the other flows. This feature provides servers
 289           with many clients some protection against DoS by a single (spoofed)
 290           flow that greatly exceeds average workload.
 291
 292 menu "Network testing"
 293
 294 config NET_PKTGEN
 295         tristate "Packet Generator (USE WITH CAUTION)"
 296         depends on INET && PROC_FS
 297         ---help---
 298           This module will inject preconfigured packets, at a configurable
 299           rate, out of a given interface.  It is used for network interface
 300           stress testing and performance analysis.  If you don't understand
 301           what was just said, you don't need it: say N.
 302
 303           Documentation on how to use the packet generator can be found
 304           at <file:Documentation/networking/pktgen.txt>.
 305
 306           To compile this code as a module, choose M here: the
 307           module will be called pktgen.
 308
 309 config NET_TCPPROBE
 310         tristate "TCP connection probing"
 311         depends on INET && PROC_FS && KPROBES
 312         ---help---
 313         This module allows for capturing the changes to TCP connection
 314         state in response to incoming packets. It is used for debugging
 315         TCP congestion avoidance modules. If you don't understand
 316         what was just said, you don't need it: say N.
 317
 318         Documentation on how to use TCP connection probing can be found
 319         at:
 320
 321           http://www.linuxfoundation.org/collaborate/workgroups/networking/tcpprobe
 322
 323         To compile this code as a module, choose M here: the
 324         module will be called tcp_probe.
 325
 326 config NET_DROP_MONITOR
 327         tristate "Network packet drop alerting service"
 328         depends on INET && TRACEPOINTS
 329         ---help---
 330         This feature provides an alerting service to userspace in the
 331         event that packets are discarded in the network stack.  Alerts
 332         are broadcast via netlink socket to any listening user space
 333         process.  If you don't need network drop alerts, or if you are ok
 334         just checking the various proc files and other utilities for
 335         drop statistics, say N here.
 336
 337 endmenu
 338
 339 endmenu
 340
 341 source "net/ax25/Kconfig"
 342 source "net/can/Kconfig"
 343 source "net/irda/Kconfig"
 344 source "net/bluetooth/Kconfig"
 345 source "net/rxrpc/Kconfig"
 346
 347 config FIB_RULES
 348         bool
 349
 350 menuconfig WIRELESS
 351         bool "Wireless"
 352         depends on !S390
 353         default y
 354
 355 if WIRELESS
 356
 357 source "net/wireless/Kconfig"
 358 source "net/mac80211/Kconfig"
 359
 360 endif # WIRELESS
 361
 362 source "net/wimax/Kconfig"
 363
 364 source "net/rfkill/Kconfig"
 365 source "net/9p/Kconfig"
 366 source "net/caif/Kconfig"
 367 source "net/ceph/Kconfig"
 368 source "net/nfc/Kconfig"
 369
 370
 371 endif   # if NET
 372
 373 # Used by archs to tell that they support BPF_JIT
 374 config HAVE_BPF_JIT
 375         bool