]> git.proxmox.com Git - mirror_ubuntu-bionic-kernel.git/blob - net/ipv4/arp.c
[ARP]: Fix arp reply when sender ip 0
[mirror_ubuntu-bionic-kernel.git] / net / ipv4 / arp.c
1 /* linux/net/ipv4/arp.c
2 *
3 * Version: $Id: arp.c,v 1.99 2001/08/30 22:55:42 davem Exp $
4 *
5 * Copyright (C) 1994 by Florian La Roche
6 *
7 * This module implements the Address Resolution Protocol ARP (RFC 826),
8 * which is used to convert IP addresses (or in the future maybe other
9 * high-level addresses) into a low-level hardware address (like an Ethernet
10 * address).
11 *
12 * This program is free software; you can redistribute it and/or
13 * modify it under the terms of the GNU General Public License
14 * as published by the Free Software Foundation; either version
15 * 2 of the License, or (at your option) any later version.
16 *
17 * Fixes:
18 * Alan Cox : Removed the Ethernet assumptions in
19 * Florian's code
20 * Alan Cox : Fixed some small errors in the ARP
21 * logic
22 * Alan Cox : Allow >4K in /proc
23 * Alan Cox : Make ARP add its own protocol entry
24 * Ross Martin : Rewrote arp_rcv() and arp_get_info()
25 * Stephen Henson : Add AX25 support to arp_get_info()
26 * Alan Cox : Drop data when a device is downed.
27 * Alan Cox : Use init_timer().
28 * Alan Cox : Double lock fixes.
29 * Martin Seine : Move the arphdr structure
30 * to if_arp.h for compatibility.
31 * with BSD based programs.
32 * Andrew Tridgell : Added ARP netmask code and
33 * re-arranged proxy handling.
34 * Alan Cox : Changed to use notifiers.
35 * Niibe Yutaka : Reply for this device or proxies only.
36 * Alan Cox : Don't proxy across hardware types!
37 * Jonathan Naylor : Added support for NET/ROM.
38 * Mike Shaver : RFC1122 checks.
39 * Jonathan Naylor : Only lookup the hardware address for
40 * the correct hardware type.
41 * Germano Caronni : Assorted subtle races.
42 * Craig Schlenter : Don't modify permanent entry
43 * during arp_rcv.
44 * Russ Nelson : Tidied up a few bits.
45 * Alexey Kuznetsov: Major changes to caching and behaviour,
46 * eg intelligent arp probing and
47 * generation
48 * of host down events.
49 * Alan Cox : Missing unlock in device events.
50 * Eckes : ARP ioctl control errors.
51 * Alexey Kuznetsov: Arp free fix.
52 * Manuel Rodriguez: Gratuitous ARP.
53 * Jonathan Layes : Added arpd support through kerneld
54 * message queue (960314)
55 * Mike Shaver : /proc/sys/net/ipv4/arp_* support
56 * Mike McLagan : Routing by source
57 * Stuart Cheshire : Metricom and grat arp fixes
58 * *** FOR 2.1 clean this up ***
59 * Lawrence V. Stefani: (08/12/96) Added FDDI support.
60 * Alan Cox : Took the AP1000 nasty FDDI hack and
61 * folded into the mainstream FDDI code.
62 * Ack spit, Linus how did you allow that
63 * one in...
64 * Jes Sorensen : Make FDDI work again in 2.1.x and
65 * clean up the APFDDI & gen. FDDI bits.
66 * Alexey Kuznetsov: new arp state machine;
67 * now it is in net/core/neighbour.c.
68 * Krzysztof Halasa: Added Frame Relay ARP support.
69 * Arnaldo C. Melo : convert /proc/net/arp to seq_file
70 * Shmulik Hen: Split arp_send to arp_create and
71 * arp_xmit so intermediate drivers like
72 * bonding can change the skb before
73 * sending (e.g. insert 8021q tag).
74 * Harald Welte : convert to make use of jenkins hash
75 */
76
77 #include <linux/module.h>
78 #include <linux/types.h>
79 #include <linux/string.h>
80 #include <linux/kernel.h>
81 #include <linux/capability.h>
82 #include <linux/socket.h>
83 #include <linux/sockios.h>
84 #include <linux/errno.h>
85 #include <linux/in.h>
86 #include <linux/mm.h>
87 #include <linux/inet.h>
88 #include <linux/inetdevice.h>
89 #include <linux/netdevice.h>
90 #include <linux/etherdevice.h>
91 #include <linux/fddidevice.h>
92 #include <linux/if_arp.h>
93 #include <linux/trdevice.h>
94 #include <linux/skbuff.h>
95 #include <linux/proc_fs.h>
96 #include <linux/seq_file.h>
97 #include <linux/stat.h>
98 #include <linux/init.h>
99 #include <linux/net.h>
100 #include <linux/rcupdate.h>
101 #include <linux/jhash.h>
102 #ifdef CONFIG_SYSCTL
103 #include <linux/sysctl.h>
104 #endif
105
106 #include <net/net_namespace.h>
107 #include <net/ip.h>
108 #include <net/icmp.h>
109 #include <net/route.h>
110 #include <net/protocol.h>
111 #include <net/tcp.h>
112 #include <net/sock.h>
113 #include <net/arp.h>
114 #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
115 #include <net/ax25.h>
116 #if defined(CONFIG_NETROM) || defined(CONFIG_NETROM_MODULE)
117 #include <net/netrom.h>
118 #endif
119 #endif
120 #if defined(CONFIG_ATM_CLIP) || defined(CONFIG_ATM_CLIP_MODULE)
121 #include <net/atmclip.h>
122 struct neigh_table *clip_tbl_hook;
123 #endif
124
125 #include <asm/system.h>
126 #include <asm/uaccess.h>
127
128 #include <linux/netfilter_arp.h>
129
130 /*
131 * Interface to generic neighbour cache.
132 */
133 static u32 arp_hash(const void *pkey, const struct net_device *dev);
134 static int arp_constructor(struct neighbour *neigh);
135 static void arp_solicit(struct neighbour *neigh, struct sk_buff *skb);
136 static void arp_error_report(struct neighbour *neigh, struct sk_buff *skb);
137 static void parp_redo(struct sk_buff *skb);
138
139 static struct neigh_ops arp_generic_ops = {
140 .family = AF_INET,
141 .solicit = arp_solicit,
142 .error_report = arp_error_report,
143 .output = neigh_resolve_output,
144 .connected_output = neigh_connected_output,
145 .hh_output = dev_queue_xmit,
146 .queue_xmit = dev_queue_xmit,
147 };
148
149 static struct neigh_ops arp_hh_ops = {
150 .family = AF_INET,
151 .solicit = arp_solicit,
152 .error_report = arp_error_report,
153 .output = neigh_resolve_output,
154 .connected_output = neigh_resolve_output,
155 .hh_output = dev_queue_xmit,
156 .queue_xmit = dev_queue_xmit,
157 };
158
159 static struct neigh_ops arp_direct_ops = {
160 .family = AF_INET,
161 .output = dev_queue_xmit,
162 .connected_output = dev_queue_xmit,
163 .hh_output = dev_queue_xmit,
164 .queue_xmit = dev_queue_xmit,
165 };
166
167 struct neigh_ops arp_broken_ops = {
168 .family = AF_INET,
169 .solicit = arp_solicit,
170 .error_report = arp_error_report,
171 .output = neigh_compat_output,
172 .connected_output = neigh_compat_output,
173 .hh_output = dev_queue_xmit,
174 .queue_xmit = dev_queue_xmit,
175 };
176
177 struct neigh_table arp_tbl = {
178 .family = AF_INET,
179 .entry_size = sizeof(struct neighbour) + 4,
180 .key_len = 4,
181 .hash = arp_hash,
182 .constructor = arp_constructor,
183 .proxy_redo = parp_redo,
184 .id = "arp_cache",
185 .parms = {
186 .tbl = &arp_tbl,
187 .base_reachable_time = 30 * HZ,
188 .retrans_time = 1 * HZ,
189 .gc_staletime = 60 * HZ,
190 .reachable_time = 30 * HZ,
191 .delay_probe_time = 5 * HZ,
192 .queue_len = 3,
193 .ucast_probes = 3,
194 .mcast_probes = 3,
195 .anycast_delay = 1 * HZ,
196 .proxy_delay = (8 * HZ) / 10,
197 .proxy_qlen = 64,
198 .locktime = 1 * HZ,
199 },
200 .gc_interval = 30 * HZ,
201 .gc_thresh1 = 128,
202 .gc_thresh2 = 512,
203 .gc_thresh3 = 1024,
204 };
205
206 int arp_mc_map(__be32 addr, u8 *haddr, struct net_device *dev, int dir)
207 {
208 switch (dev->type) {
209 case ARPHRD_ETHER:
210 case ARPHRD_FDDI:
211 case ARPHRD_IEEE802:
212 ip_eth_mc_map(addr, haddr);
213 return 0;
214 case ARPHRD_IEEE802_TR:
215 ip_tr_mc_map(addr, haddr);
216 return 0;
217 case ARPHRD_INFINIBAND:
218 ip_ib_mc_map(addr, haddr);
219 return 0;
220 default:
221 if (dir) {
222 memcpy(haddr, dev->broadcast, dev->addr_len);
223 return 0;
224 }
225 }
226 return -EINVAL;
227 }
228
229
230 static u32 arp_hash(const void *pkey, const struct net_device *dev)
231 {
232 return jhash_2words(*(u32 *)pkey, dev->ifindex, arp_tbl.hash_rnd);
233 }
234
235 static int arp_constructor(struct neighbour *neigh)
236 {
237 __be32 addr = *(__be32*)neigh->primary_key;
238 struct net_device *dev = neigh->dev;
239 struct in_device *in_dev;
240 struct neigh_parms *parms;
241
242 neigh->type = inet_addr_type(addr);
243
244 rcu_read_lock();
245 in_dev = __in_dev_get_rcu(dev);
246 if (in_dev == NULL) {
247 rcu_read_unlock();
248 return -EINVAL;
249 }
250
251 parms = in_dev->arp_parms;
252 __neigh_parms_put(neigh->parms);
253 neigh->parms = neigh_parms_clone(parms);
254 rcu_read_unlock();
255
256 if (!dev->header_ops) {
257 neigh->nud_state = NUD_NOARP;
258 neigh->ops = &arp_direct_ops;
259 neigh->output = neigh->ops->queue_xmit;
260 } else {
261 /* Good devices (checked by reading texts, but only Ethernet is
262 tested)
263
264 ARPHRD_ETHER: (ethernet, apfddi)
265 ARPHRD_FDDI: (fddi)
266 ARPHRD_IEEE802: (tr)
267 ARPHRD_METRICOM: (strip)
268 ARPHRD_ARCNET:
269 etc. etc. etc.
270
271 ARPHRD_IPDDP will also work, if author repairs it.
272 I did not it, because this driver does not work even
273 in old paradigm.
274 */
275
276 #if 1
277 /* So... these "amateur" devices are hopeless.
278 The only thing, that I can say now:
279 It is very sad that we need to keep ugly obsolete
280 code to make them happy.
281
282 They should be moved to more reasonable state, now
283 they use rebuild_header INSTEAD OF hard_start_xmit!!!
284 Besides that, they are sort of out of date
285 (a lot of redundant clones/copies, useless in 2.1),
286 I wonder why people believe that they work.
287 */
288 switch (dev->type) {
289 default:
290 break;
291 case ARPHRD_ROSE:
292 #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
293 case ARPHRD_AX25:
294 #if defined(CONFIG_NETROM) || defined(CONFIG_NETROM_MODULE)
295 case ARPHRD_NETROM:
296 #endif
297 neigh->ops = &arp_broken_ops;
298 neigh->output = neigh->ops->output;
299 return 0;
300 #endif
301 ;}
302 #endif
303 if (neigh->type == RTN_MULTICAST) {
304 neigh->nud_state = NUD_NOARP;
305 arp_mc_map(addr, neigh->ha, dev, 1);
306 } else if (dev->flags&(IFF_NOARP|IFF_LOOPBACK)) {
307 neigh->nud_state = NUD_NOARP;
308 memcpy(neigh->ha, dev->dev_addr, dev->addr_len);
309 } else if (neigh->type == RTN_BROADCAST || dev->flags&IFF_POINTOPOINT) {
310 neigh->nud_state = NUD_NOARP;
311 memcpy(neigh->ha, dev->broadcast, dev->addr_len);
312 }
313
314 if (dev->header_ops->cache)
315 neigh->ops = &arp_hh_ops;
316 else
317 neigh->ops = &arp_generic_ops;
318
319 if (neigh->nud_state&NUD_VALID)
320 neigh->output = neigh->ops->connected_output;
321 else
322 neigh->output = neigh->ops->output;
323 }
324 return 0;
325 }
326
327 static void arp_error_report(struct neighbour *neigh, struct sk_buff *skb)
328 {
329 dst_link_failure(skb);
330 kfree_skb(skb);
331 }
332
333 static void arp_solicit(struct neighbour *neigh, struct sk_buff *skb)
334 {
335 __be32 saddr = 0;
336 u8 *dst_ha = NULL;
337 struct net_device *dev = neigh->dev;
338 __be32 target = *(__be32*)neigh->primary_key;
339 int probes = atomic_read(&neigh->probes);
340 struct in_device *in_dev = in_dev_get(dev);
341
342 if (!in_dev)
343 return;
344
345 switch (IN_DEV_ARP_ANNOUNCE(in_dev)) {
346 default:
347 case 0: /* By default announce any local IP */
348 if (skb && inet_addr_type(ip_hdr(skb)->saddr) == RTN_LOCAL)
349 saddr = ip_hdr(skb)->saddr;
350 break;
351 case 1: /* Restrict announcements of saddr in same subnet */
352 if (!skb)
353 break;
354 saddr = ip_hdr(skb)->saddr;
355 if (inet_addr_type(saddr) == RTN_LOCAL) {
356 /* saddr should be known to target */
357 if (inet_addr_onlink(in_dev, target, saddr))
358 break;
359 }
360 saddr = 0;
361 break;
362 case 2: /* Avoid secondary IPs, get a primary/preferred one */
363 break;
364 }
365
366 if (in_dev)
367 in_dev_put(in_dev);
368 if (!saddr)
369 saddr = inet_select_addr(dev, target, RT_SCOPE_LINK);
370
371 if ((probes -= neigh->parms->ucast_probes) < 0) {
372 if (!(neigh->nud_state&NUD_VALID))
373 printk(KERN_DEBUG "trying to ucast probe in NUD_INVALID\n");
374 dst_ha = neigh->ha;
375 read_lock_bh(&neigh->lock);
376 } else if ((probes -= neigh->parms->app_probes) < 0) {
377 #ifdef CONFIG_ARPD
378 neigh_app_ns(neigh);
379 #endif
380 return;
381 }
382
383 arp_send(ARPOP_REQUEST, ETH_P_ARP, target, dev, saddr,
384 dst_ha, dev->dev_addr, NULL);
385 if (dst_ha)
386 read_unlock_bh(&neigh->lock);
387 }
388
389 static int arp_ignore(struct in_device *in_dev, struct net_device *dev,
390 __be32 sip, __be32 tip)
391 {
392 int scope;
393
394 switch (IN_DEV_ARP_IGNORE(in_dev)) {
395 case 0: /* Reply, the tip is already validated */
396 return 0;
397 case 1: /* Reply only if tip is configured on the incoming interface */
398 sip = 0;
399 scope = RT_SCOPE_HOST;
400 break;
401 case 2: /*
402 * Reply only if tip is configured on the incoming interface
403 * and is in same subnet as sip
404 */
405 scope = RT_SCOPE_HOST;
406 break;
407 case 3: /* Do not reply for scope host addresses */
408 sip = 0;
409 scope = RT_SCOPE_LINK;
410 dev = NULL;
411 break;
412 case 4: /* Reserved */
413 case 5:
414 case 6:
415 case 7:
416 return 0;
417 case 8: /* Do not reply */
418 return 1;
419 default:
420 return 0;
421 }
422 return !inet_confirm_addr(dev, sip, tip, scope);
423 }
424
425 static int arp_filter(__be32 sip, __be32 tip, struct net_device *dev)
426 {
427 struct flowi fl = { .nl_u = { .ip4_u = { .daddr = sip,
428 .saddr = tip } } };
429 struct rtable *rt;
430 int flag = 0;
431 /*unsigned long now; */
432
433 if (ip_route_output_key(&rt, &fl) < 0)
434 return 1;
435 if (rt->u.dst.dev != dev) {
436 NET_INC_STATS_BH(LINUX_MIB_ARPFILTER);
437 flag = 1;
438 }
439 ip_rt_put(rt);
440 return flag;
441 }
442
443 /* OBSOLETE FUNCTIONS */
444
445 /*
446 * Find an arp mapping in the cache. If not found, post a request.
447 *
448 * It is very UGLY routine: it DOES NOT use skb->dst->neighbour,
449 * even if it exists. It is supposed that skb->dev was mangled
450 * by a virtual device (eql, shaper). Nobody but broken devices
451 * is allowed to use this function, it is scheduled to be removed. --ANK
452 */
453
454 static int arp_set_predefined(int addr_hint, unsigned char * haddr, __be32 paddr, struct net_device * dev)
455 {
456 switch (addr_hint) {
457 case RTN_LOCAL:
458 printk(KERN_DEBUG "ARP: arp called for own IP address\n");
459 memcpy(haddr, dev->dev_addr, dev->addr_len);
460 return 1;
461 case RTN_MULTICAST:
462 arp_mc_map(paddr, haddr, dev, 1);
463 return 1;
464 case RTN_BROADCAST:
465 memcpy(haddr, dev->broadcast, dev->addr_len);
466 return 1;
467 }
468 return 0;
469 }
470
471
472 int arp_find(unsigned char *haddr, struct sk_buff *skb)
473 {
474 struct net_device *dev = skb->dev;
475 __be32 paddr;
476 struct neighbour *n;
477
478 if (!skb->dst) {
479 printk(KERN_DEBUG "arp_find is called with dst==NULL\n");
480 kfree_skb(skb);
481 return 1;
482 }
483
484 paddr = ((struct rtable*)skb->dst)->rt_gateway;
485
486 if (arp_set_predefined(inet_addr_type(paddr), haddr, paddr, dev))
487 return 0;
488
489 n = __neigh_lookup(&arp_tbl, &paddr, dev, 1);
490
491 if (n) {
492 n->used = jiffies;
493 if (n->nud_state&NUD_VALID || neigh_event_send(n, skb) == 0) {
494 read_lock_bh(&n->lock);
495 memcpy(haddr, n->ha, dev->addr_len);
496 read_unlock_bh(&n->lock);
497 neigh_release(n);
498 return 0;
499 }
500 neigh_release(n);
501 } else
502 kfree_skb(skb);
503 return 1;
504 }
505
506 /* END OF OBSOLETE FUNCTIONS */
507
508 int arp_bind_neighbour(struct dst_entry *dst)
509 {
510 struct net_device *dev = dst->dev;
511 struct neighbour *n = dst->neighbour;
512
513 if (dev == NULL)
514 return -EINVAL;
515 if (n == NULL) {
516 __be32 nexthop = ((struct rtable*)dst)->rt_gateway;
517 if (dev->flags&(IFF_LOOPBACK|IFF_POINTOPOINT))
518 nexthop = 0;
519 n = __neigh_lookup_errno(
520 #if defined(CONFIG_ATM_CLIP) || defined(CONFIG_ATM_CLIP_MODULE)
521 dev->type == ARPHRD_ATM ? clip_tbl_hook :
522 #endif
523 &arp_tbl, &nexthop, dev);
524 if (IS_ERR(n))
525 return PTR_ERR(n);
526 dst->neighbour = n;
527 }
528 return 0;
529 }
530
531 /*
532 * Check if we can use proxy ARP for this path
533 */
534
535 static inline int arp_fwd_proxy(struct in_device *in_dev, struct rtable *rt)
536 {
537 struct in_device *out_dev;
538 int imi, omi = -1;
539
540 if (!IN_DEV_PROXY_ARP(in_dev))
541 return 0;
542
543 if ((imi = IN_DEV_MEDIUM_ID(in_dev)) == 0)
544 return 1;
545 if (imi == -1)
546 return 0;
547
548 /* place to check for proxy_arp for routes */
549
550 if ((out_dev = in_dev_get(rt->u.dst.dev)) != NULL) {
551 omi = IN_DEV_MEDIUM_ID(out_dev);
552 in_dev_put(out_dev);
553 }
554 return (omi != imi && omi != -1);
555 }
556
557 /*
558 * Interface to link layer: send routine and receive handler.
559 */
560
561 /*
562 * Create an arp packet. If (dest_hw == NULL), we create a broadcast
563 * message.
564 */
565 struct sk_buff *arp_create(int type, int ptype, __be32 dest_ip,
566 struct net_device *dev, __be32 src_ip,
567 unsigned char *dest_hw, unsigned char *src_hw,
568 unsigned char *target_hw)
569 {
570 struct sk_buff *skb;
571 struct arphdr *arp;
572 unsigned char *arp_ptr;
573
574 /*
575 * Allocate a buffer
576 */
577
578 skb = alloc_skb(sizeof(struct arphdr)+ 2*(dev->addr_len+4)
579 + LL_RESERVED_SPACE(dev), GFP_ATOMIC);
580 if (skb == NULL)
581 return NULL;
582
583 skb_reserve(skb, LL_RESERVED_SPACE(dev));
584 skb_reset_network_header(skb);
585 arp = (struct arphdr *) skb_put(skb,sizeof(struct arphdr) + 2*(dev->addr_len+4));
586 skb->dev = dev;
587 skb->protocol = htons(ETH_P_ARP);
588 if (src_hw == NULL)
589 src_hw = dev->dev_addr;
590 if (dest_hw == NULL)
591 dest_hw = dev->broadcast;
592
593 /*
594 * Fill the device header for the ARP frame
595 */
596 if (dev_hard_header(skb, dev, ptype, dest_hw, src_hw, skb->len) < 0)
597 goto out;
598
599 /*
600 * Fill out the arp protocol part.
601 *
602 * The arp hardware type should match the device type, except for FDDI,
603 * which (according to RFC 1390) should always equal 1 (Ethernet).
604 */
605 /*
606 * Exceptions everywhere. AX.25 uses the AX.25 PID value not the
607 * DIX code for the protocol. Make these device structure fields.
608 */
609 switch (dev->type) {
610 default:
611 arp->ar_hrd = htons(dev->type);
612 arp->ar_pro = htons(ETH_P_IP);
613 break;
614
615 #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
616 case ARPHRD_AX25:
617 arp->ar_hrd = htons(ARPHRD_AX25);
618 arp->ar_pro = htons(AX25_P_IP);
619 break;
620
621 #if defined(CONFIG_NETROM) || defined(CONFIG_NETROM_MODULE)
622 case ARPHRD_NETROM:
623 arp->ar_hrd = htons(ARPHRD_NETROM);
624 arp->ar_pro = htons(AX25_P_IP);
625 break;
626 #endif
627 #endif
628
629 #ifdef CONFIG_FDDI
630 case ARPHRD_FDDI:
631 arp->ar_hrd = htons(ARPHRD_ETHER);
632 arp->ar_pro = htons(ETH_P_IP);
633 break;
634 #endif
635 #ifdef CONFIG_TR
636 case ARPHRD_IEEE802_TR:
637 arp->ar_hrd = htons(ARPHRD_IEEE802);
638 arp->ar_pro = htons(ETH_P_IP);
639 break;
640 #endif
641 }
642
643 arp->ar_hln = dev->addr_len;
644 arp->ar_pln = 4;
645 arp->ar_op = htons(type);
646
647 arp_ptr=(unsigned char *)(arp+1);
648
649 memcpy(arp_ptr, src_hw, dev->addr_len);
650 arp_ptr+=dev->addr_len;
651 memcpy(arp_ptr, &src_ip,4);
652 arp_ptr+=4;
653 if (target_hw != NULL)
654 memcpy(arp_ptr, target_hw, dev->addr_len);
655 else
656 memset(arp_ptr, 0, dev->addr_len);
657 arp_ptr+=dev->addr_len;
658 memcpy(arp_ptr, &dest_ip, 4);
659
660 return skb;
661
662 out:
663 kfree_skb(skb);
664 return NULL;
665 }
666
667 /*
668 * Send an arp packet.
669 */
670 void arp_xmit(struct sk_buff *skb)
671 {
672 /* Send it off, maybe filter it using firewalling first. */
673 NF_HOOK(NF_ARP, NF_ARP_OUT, skb, NULL, skb->dev, dev_queue_xmit);
674 }
675
676 /*
677 * Create and send an arp packet.
678 */
679 void arp_send(int type, int ptype, __be32 dest_ip,
680 struct net_device *dev, __be32 src_ip,
681 unsigned char *dest_hw, unsigned char *src_hw,
682 unsigned char *target_hw)
683 {
684 struct sk_buff *skb;
685
686 /*
687 * No arp on this interface.
688 */
689
690 if (dev->flags&IFF_NOARP)
691 return;
692
693 skb = arp_create(type, ptype, dest_ip, dev, src_ip,
694 dest_hw, src_hw, target_hw);
695 if (skb == NULL) {
696 return;
697 }
698
699 arp_xmit(skb);
700 }
701
702 /*
703 * Process an arp request.
704 */
705
706 static int arp_process(struct sk_buff *skb)
707 {
708 struct net_device *dev = skb->dev;
709 struct in_device *in_dev = in_dev_get(dev);
710 struct arphdr *arp;
711 unsigned char *arp_ptr;
712 struct rtable *rt;
713 unsigned char *sha, *tha;
714 __be32 sip, tip;
715 u16 dev_type = dev->type;
716 int addr_type;
717 struct neighbour *n;
718
719 /* arp_rcv below verifies the ARP header and verifies the device
720 * is ARP'able.
721 */
722
723 if (in_dev == NULL)
724 goto out;
725
726 arp = arp_hdr(skb);
727
728 switch (dev_type) {
729 default:
730 if (arp->ar_pro != htons(ETH_P_IP) ||
731 htons(dev_type) != arp->ar_hrd)
732 goto out;
733 break;
734 #ifdef CONFIG_NET_ETHERNET
735 case ARPHRD_ETHER:
736 #endif
737 #ifdef CONFIG_TR
738 case ARPHRD_IEEE802_TR:
739 #endif
740 #ifdef CONFIG_FDDI
741 case ARPHRD_FDDI:
742 #endif
743 #ifdef CONFIG_NET_FC
744 case ARPHRD_IEEE802:
745 #endif
746 #if defined(CONFIG_NET_ETHERNET) || defined(CONFIG_TR) || \
747 defined(CONFIG_FDDI) || defined(CONFIG_NET_FC)
748 /*
749 * ETHERNET, Token Ring and Fibre Channel (which are IEEE 802
750 * devices, according to RFC 2625) devices will accept ARP
751 * hardware types of either 1 (Ethernet) or 6 (IEEE 802.2).
752 * This is the case also of FDDI, where the RFC 1390 says that
753 * FDDI devices should accept ARP hardware of (1) Ethernet,
754 * however, to be more robust, we'll accept both 1 (Ethernet)
755 * or 6 (IEEE 802.2)
756 */
757 if ((arp->ar_hrd != htons(ARPHRD_ETHER) &&
758 arp->ar_hrd != htons(ARPHRD_IEEE802)) ||
759 arp->ar_pro != htons(ETH_P_IP))
760 goto out;
761 break;
762 #endif
763 #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
764 case ARPHRD_AX25:
765 if (arp->ar_pro != htons(AX25_P_IP) ||
766 arp->ar_hrd != htons(ARPHRD_AX25))
767 goto out;
768 break;
769 #if defined(CONFIG_NETROM) || defined(CONFIG_NETROM_MODULE)
770 case ARPHRD_NETROM:
771 if (arp->ar_pro != htons(AX25_P_IP) ||
772 arp->ar_hrd != htons(ARPHRD_NETROM))
773 goto out;
774 break;
775 #endif
776 #endif
777 }
778
779 /* Understand only these message types */
780
781 if (arp->ar_op != htons(ARPOP_REPLY) &&
782 arp->ar_op != htons(ARPOP_REQUEST))
783 goto out;
784
785 /*
786 * Extract fields
787 */
788 arp_ptr= (unsigned char *)(arp+1);
789 sha = arp_ptr;
790 arp_ptr += dev->addr_len;
791 memcpy(&sip, arp_ptr, 4);
792 arp_ptr += 4;
793 tha = arp_ptr;
794 arp_ptr += dev->addr_len;
795 memcpy(&tip, arp_ptr, 4);
796 /*
797 * Check for bad requests for 127.x.x.x and requests for multicast
798 * addresses. If this is one such, delete it.
799 */
800 if (LOOPBACK(tip) || MULTICAST(tip))
801 goto out;
802
803 /*
804 * Special case: We must set Frame Relay source Q.922 address
805 */
806 if (dev_type == ARPHRD_DLCI)
807 sha = dev->broadcast;
808
809 /*
810 * Process entry. The idea here is we want to send a reply if it is a
811 * request for us or if it is a request for someone else that we hold
812 * a proxy for. We want to add an entry to our cache if it is a reply
813 * to us or if it is a request for our address.
814 * (The assumption for this last is that if someone is requesting our
815 * address, they are probably intending to talk to us, so it saves time
816 * if we cache their address. Their address is also probably not in
817 * our cache, since ours is not in their cache.)
818 *
819 * Putting this another way, we only care about replies if they are to
820 * us, in which case we add them to the cache. For requests, we care
821 * about those for us and those for our proxies. We reply to both,
822 * and in the case of requests for us we add the requester to the arp
823 * cache.
824 */
825
826 /* Special case: IPv4 duplicate address detection packet (RFC2131) */
827 if (sip == 0) {
828 if (arp->ar_op == htons(ARPOP_REQUEST) &&
829 inet_addr_type(tip) == RTN_LOCAL &&
830 !arp_ignore(in_dev,dev,sip,tip))
831 arp_send(ARPOP_REPLY, ETH_P_ARP, sip, dev, tip, sha,
832 dev->dev_addr, sha);
833 goto out;
834 }
835
836 if (arp->ar_op == htons(ARPOP_REQUEST) &&
837 ip_route_input(skb, tip, sip, 0, dev) == 0) {
838
839 rt = (struct rtable*)skb->dst;
840 addr_type = rt->rt_type;
841
842 if (addr_type == RTN_LOCAL) {
843 n = neigh_event_ns(&arp_tbl, sha, &sip, dev);
844 if (n) {
845 int dont_send = 0;
846
847 if (!dont_send)
848 dont_send |= arp_ignore(in_dev,dev,sip,tip);
849 if (!dont_send && IN_DEV_ARPFILTER(in_dev))
850 dont_send |= arp_filter(sip,tip,dev);
851 if (!dont_send)
852 arp_send(ARPOP_REPLY,ETH_P_ARP,sip,dev,tip,sha,dev->dev_addr,sha);
853
854 neigh_release(n);
855 }
856 goto out;
857 } else if (IN_DEV_FORWARD(in_dev)) {
858 if ((rt->rt_flags&RTCF_DNAT) ||
859 (addr_type == RTN_UNICAST && rt->u.dst.dev != dev &&
860 (arp_fwd_proxy(in_dev, rt) || pneigh_lookup(&arp_tbl, &tip, dev, 0)))) {
861 n = neigh_event_ns(&arp_tbl, sha, &sip, dev);
862 if (n)
863 neigh_release(n);
864
865 if (NEIGH_CB(skb)->flags & LOCALLY_ENQUEUED ||
866 skb->pkt_type == PACKET_HOST ||
867 in_dev->arp_parms->proxy_delay == 0) {
868 arp_send(ARPOP_REPLY,ETH_P_ARP,sip,dev,tip,sha,dev->dev_addr,sha);
869 } else {
870 pneigh_enqueue(&arp_tbl, in_dev->arp_parms, skb);
871 in_dev_put(in_dev);
872 return 0;
873 }
874 goto out;
875 }
876 }
877 }
878
879 /* Update our ARP tables */
880
881 n = __neigh_lookup(&arp_tbl, &sip, dev, 0);
882
883 if (IPV4_DEVCONF_ALL(ARP_ACCEPT)) {
884 /* Unsolicited ARP is not accepted by default.
885 It is possible, that this option should be enabled for some
886 devices (strip is candidate)
887 */
888 if (n == NULL &&
889 arp->ar_op == htons(ARPOP_REPLY) &&
890 inet_addr_type(sip) == RTN_UNICAST)
891 n = __neigh_lookup(&arp_tbl, &sip, dev, 1);
892 }
893
894 if (n) {
895 int state = NUD_REACHABLE;
896 int override;
897
898 /* If several different ARP replies follows back-to-back,
899 use the FIRST one. It is possible, if several proxy
900 agents are active. Taking the first reply prevents
901 arp trashing and chooses the fastest router.
902 */
903 override = time_after(jiffies, n->updated + n->parms->locktime);
904
905 /* Broadcast replies and request packets
906 do not assert neighbour reachability.
907 */
908 if (arp->ar_op != htons(ARPOP_REPLY) ||
909 skb->pkt_type != PACKET_HOST)
910 state = NUD_STALE;
911 neigh_update(n, sha, state, override ? NEIGH_UPDATE_F_OVERRIDE : 0);
912 neigh_release(n);
913 }
914
915 out:
916 if (in_dev)
917 in_dev_put(in_dev);
918 kfree_skb(skb);
919 return 0;
920 }
921
922 static void parp_redo(struct sk_buff *skb)
923 {
924 arp_process(skb);
925 }
926
927
928 /*
929 * Receive an arp request from the device layer.
930 */
931
932 static int arp_rcv(struct sk_buff *skb, struct net_device *dev,
933 struct packet_type *pt, struct net_device *orig_dev)
934 {
935 struct arphdr *arp;
936
937 if (dev->nd_net != &init_net)
938 goto freeskb;
939
940 /* ARP header, plus 2 device addresses, plus 2 IP addresses. */
941 if (!pskb_may_pull(skb, (sizeof(struct arphdr) +
942 (2 * dev->addr_len) +
943 (2 * sizeof(u32)))))
944 goto freeskb;
945
946 arp = arp_hdr(skb);
947 if (arp->ar_hln != dev->addr_len ||
948 dev->flags & IFF_NOARP ||
949 skb->pkt_type == PACKET_OTHERHOST ||
950 skb->pkt_type == PACKET_LOOPBACK ||
951 arp->ar_pln != 4)
952 goto freeskb;
953
954 if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL)
955 goto out_of_mem;
956
957 memset(NEIGH_CB(skb), 0, sizeof(struct neighbour_cb));
958
959 return NF_HOOK(NF_ARP, NF_ARP_IN, skb, dev, NULL, arp_process);
960
961 freeskb:
962 kfree_skb(skb);
963 out_of_mem:
964 return 0;
965 }
966
967 /*
968 * User level interface (ioctl)
969 */
970
971 /*
972 * Set (create) an ARP cache entry.
973 */
974
975 static int arp_req_set(struct arpreq *r, struct net_device * dev)
976 {
977 __be32 ip = ((struct sockaddr_in *) &r->arp_pa)->sin_addr.s_addr;
978 struct neighbour *neigh;
979 int err;
980
981 if (r->arp_flags&ATF_PUBL) {
982 __be32 mask = ((struct sockaddr_in *) &r->arp_netmask)->sin_addr.s_addr;
983 if (mask && mask != htonl(0xFFFFFFFF))
984 return -EINVAL;
985 if (!dev && (r->arp_flags & ATF_COM)) {
986 dev = dev_getbyhwaddr(&init_net, r->arp_ha.sa_family, r->arp_ha.sa_data);
987 if (!dev)
988 return -ENODEV;
989 }
990 if (mask) {
991 if (pneigh_lookup(&arp_tbl, &ip, dev, 1) == NULL)
992 return -ENOBUFS;
993 return 0;
994 }
995 if (dev == NULL) {
996 IPV4_DEVCONF_ALL(PROXY_ARP) = 1;
997 return 0;
998 }
999 if (__in_dev_get_rtnl(dev)) {
1000 IN_DEV_CONF_SET(__in_dev_get_rtnl(dev), PROXY_ARP, 1);
1001 return 0;
1002 }
1003 return -ENXIO;
1004 }
1005
1006 if (r->arp_flags & ATF_PERM)
1007 r->arp_flags |= ATF_COM;
1008 if (dev == NULL) {
1009 struct flowi fl = { .nl_u = { .ip4_u = { .daddr = ip,
1010 .tos = RTO_ONLINK } } };
1011 struct rtable * rt;
1012 if ((err = ip_route_output_key(&rt, &fl)) != 0)
1013 return err;
1014 dev = rt->u.dst.dev;
1015 ip_rt_put(rt);
1016 if (!dev)
1017 return -EINVAL;
1018 }
1019 switch (dev->type) {
1020 #ifdef CONFIG_FDDI
1021 case ARPHRD_FDDI:
1022 /*
1023 * According to RFC 1390, FDDI devices should accept ARP
1024 * hardware types of 1 (Ethernet). However, to be more
1025 * robust, we'll accept hardware types of either 1 (Ethernet)
1026 * or 6 (IEEE 802.2).
1027 */
1028 if (r->arp_ha.sa_family != ARPHRD_FDDI &&
1029 r->arp_ha.sa_family != ARPHRD_ETHER &&
1030 r->arp_ha.sa_family != ARPHRD_IEEE802)
1031 return -EINVAL;
1032 break;
1033 #endif
1034 default:
1035 if (r->arp_ha.sa_family != dev->type)
1036 return -EINVAL;
1037 break;
1038 }
1039
1040 neigh = __neigh_lookup_errno(&arp_tbl, &ip, dev);
1041 err = PTR_ERR(neigh);
1042 if (!IS_ERR(neigh)) {
1043 unsigned state = NUD_STALE;
1044 if (r->arp_flags & ATF_PERM)
1045 state = NUD_PERMANENT;
1046 err = neigh_update(neigh, (r->arp_flags&ATF_COM) ?
1047 r->arp_ha.sa_data : NULL, state,
1048 NEIGH_UPDATE_F_OVERRIDE|
1049 NEIGH_UPDATE_F_ADMIN);
1050 neigh_release(neigh);
1051 }
1052 return err;
1053 }
1054
1055 static unsigned arp_state_to_flags(struct neighbour *neigh)
1056 {
1057 unsigned flags = 0;
1058 if (neigh->nud_state&NUD_PERMANENT)
1059 flags = ATF_PERM|ATF_COM;
1060 else if (neigh->nud_state&NUD_VALID)
1061 flags = ATF_COM;
1062 return flags;
1063 }
1064
1065 /*
1066 * Get an ARP cache entry.
1067 */
1068
1069 static int arp_req_get(struct arpreq *r, struct net_device *dev)
1070 {
1071 __be32 ip = ((struct sockaddr_in *) &r->arp_pa)->sin_addr.s_addr;
1072 struct neighbour *neigh;
1073 int err = -ENXIO;
1074
1075 neigh = neigh_lookup(&arp_tbl, &ip, dev);
1076 if (neigh) {
1077 read_lock_bh(&neigh->lock);
1078 memcpy(r->arp_ha.sa_data, neigh->ha, dev->addr_len);
1079 r->arp_flags = arp_state_to_flags(neigh);
1080 read_unlock_bh(&neigh->lock);
1081 r->arp_ha.sa_family = dev->type;
1082 strlcpy(r->arp_dev, dev->name, sizeof(r->arp_dev));
1083 neigh_release(neigh);
1084 err = 0;
1085 }
1086 return err;
1087 }
1088
1089 static int arp_req_delete(struct arpreq *r, struct net_device * dev)
1090 {
1091 int err;
1092 __be32 ip = ((struct sockaddr_in *)&r->arp_pa)->sin_addr.s_addr;
1093 struct neighbour *neigh;
1094
1095 if (r->arp_flags & ATF_PUBL) {
1096 __be32 mask =
1097 ((struct sockaddr_in *)&r->arp_netmask)->sin_addr.s_addr;
1098 if (mask == htonl(0xFFFFFFFF))
1099 return pneigh_delete(&arp_tbl, &ip, dev);
1100 if (mask == 0) {
1101 if (dev == NULL) {
1102 IPV4_DEVCONF_ALL(PROXY_ARP) = 0;
1103 return 0;
1104 }
1105 if (__in_dev_get_rtnl(dev)) {
1106 IN_DEV_CONF_SET(__in_dev_get_rtnl(dev),
1107 PROXY_ARP, 0);
1108 return 0;
1109 }
1110 return -ENXIO;
1111 }
1112 return -EINVAL;
1113 }
1114
1115 if (dev == NULL) {
1116 struct flowi fl = { .nl_u = { .ip4_u = { .daddr = ip,
1117 .tos = RTO_ONLINK } } };
1118 struct rtable * rt;
1119 if ((err = ip_route_output_key(&rt, &fl)) != 0)
1120 return err;
1121 dev = rt->u.dst.dev;
1122 ip_rt_put(rt);
1123 if (!dev)
1124 return -EINVAL;
1125 }
1126 err = -ENXIO;
1127 neigh = neigh_lookup(&arp_tbl, &ip, dev);
1128 if (neigh) {
1129 if (neigh->nud_state&~NUD_NOARP)
1130 err = neigh_update(neigh, NULL, NUD_FAILED,
1131 NEIGH_UPDATE_F_OVERRIDE|
1132 NEIGH_UPDATE_F_ADMIN);
1133 neigh_release(neigh);
1134 }
1135 return err;
1136 }
1137
1138 /*
1139 * Handle an ARP layer I/O control request.
1140 */
1141
1142 int arp_ioctl(unsigned int cmd, void __user *arg)
1143 {
1144 int err;
1145 struct arpreq r;
1146 struct net_device *dev = NULL;
1147
1148 switch (cmd) {
1149 case SIOCDARP:
1150 case SIOCSARP:
1151 if (!capable(CAP_NET_ADMIN))
1152 return -EPERM;
1153 case SIOCGARP:
1154 err = copy_from_user(&r, arg, sizeof(struct arpreq));
1155 if (err)
1156 return -EFAULT;
1157 break;
1158 default:
1159 return -EINVAL;
1160 }
1161
1162 if (r.arp_pa.sa_family != AF_INET)
1163 return -EPFNOSUPPORT;
1164
1165 if (!(r.arp_flags & ATF_PUBL) &&
1166 (r.arp_flags & (ATF_NETMASK|ATF_DONTPUB)))
1167 return -EINVAL;
1168 if (!(r.arp_flags & ATF_NETMASK))
1169 ((struct sockaddr_in *)&r.arp_netmask)->sin_addr.s_addr =
1170 htonl(0xFFFFFFFFUL);
1171 rtnl_lock();
1172 if (r.arp_dev[0]) {
1173 err = -ENODEV;
1174 if ((dev = __dev_get_by_name(&init_net, r.arp_dev)) == NULL)
1175 goto out;
1176
1177 /* Mmmm... It is wrong... ARPHRD_NETROM==0 */
1178 if (!r.arp_ha.sa_family)
1179 r.arp_ha.sa_family = dev->type;
1180 err = -EINVAL;
1181 if ((r.arp_flags & ATF_COM) && r.arp_ha.sa_family != dev->type)
1182 goto out;
1183 } else if (cmd == SIOCGARP) {
1184 err = -ENODEV;
1185 goto out;
1186 }
1187
1188 switch (cmd) {
1189 case SIOCDARP:
1190 err = arp_req_delete(&r, dev);
1191 break;
1192 case SIOCSARP:
1193 err = arp_req_set(&r, dev);
1194 break;
1195 case SIOCGARP:
1196 err = arp_req_get(&r, dev);
1197 if (!err && copy_to_user(arg, &r, sizeof(r)))
1198 err = -EFAULT;
1199 break;
1200 }
1201 out:
1202 rtnl_unlock();
1203 return err;
1204 }
1205
1206 static int arp_netdev_event(struct notifier_block *this, unsigned long event, void *ptr)
1207 {
1208 struct net_device *dev = ptr;
1209
1210 if (dev->nd_net != &init_net)
1211 return NOTIFY_DONE;
1212
1213 switch (event) {
1214 case NETDEV_CHANGEADDR:
1215 neigh_changeaddr(&arp_tbl, dev);
1216 rt_cache_flush(0);
1217 break;
1218 default:
1219 break;
1220 }
1221
1222 return NOTIFY_DONE;
1223 }
1224
1225 static struct notifier_block arp_netdev_notifier = {
1226 .notifier_call = arp_netdev_event,
1227 };
1228
1229 /* Note, that it is not on notifier chain.
1230 It is necessary, that this routine was called after route cache will be
1231 flushed.
1232 */
1233 void arp_ifdown(struct net_device *dev)
1234 {
1235 neigh_ifdown(&arp_tbl, dev);
1236 }
1237
1238
1239 /*
1240 * Called once on startup.
1241 */
1242
1243 static struct packet_type arp_packet_type = {
1244 .type = __constant_htons(ETH_P_ARP),
1245 .func = arp_rcv,
1246 };
1247
1248 static int arp_proc_init(void);
1249
1250 void __init arp_init(void)
1251 {
1252 neigh_table_init(&arp_tbl);
1253
1254 dev_add_pack(&arp_packet_type);
1255 arp_proc_init();
1256 #ifdef CONFIG_SYSCTL
1257 neigh_sysctl_register(NULL, &arp_tbl.parms, NET_IPV4,
1258 NET_IPV4_NEIGH, "ipv4", NULL, NULL);
1259 #endif
1260 register_netdevice_notifier(&arp_netdev_notifier);
1261 }
1262
1263 #ifdef CONFIG_PROC_FS
1264 #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
1265
1266 /* ------------------------------------------------------------------------ */
1267 /*
1268 * ax25 -> ASCII conversion
1269 */
1270 static char *ax2asc2(ax25_address *a, char *buf)
1271 {
1272 char c, *s;
1273 int n;
1274
1275 for (n = 0, s = buf; n < 6; n++) {
1276 c = (a->ax25_call[n] >> 1) & 0x7F;
1277
1278 if (c != ' ') *s++ = c;
1279 }
1280
1281 *s++ = '-';
1282
1283 if ((n = ((a->ax25_call[6] >> 1) & 0x0F)) > 9) {
1284 *s++ = '1';
1285 n -= 10;
1286 }
1287
1288 *s++ = n + '0';
1289 *s++ = '\0';
1290
1291 if (*buf == '\0' || *buf == '-')
1292 return "*";
1293
1294 return buf;
1295
1296 }
1297 #endif /* CONFIG_AX25 */
1298
1299 #define HBUFFERLEN 30
1300
1301 static void arp_format_neigh_entry(struct seq_file *seq,
1302 struct neighbour *n)
1303 {
1304 char hbuffer[HBUFFERLEN];
1305 const char hexbuf[] = "0123456789ABCDEF";
1306 int k, j;
1307 char tbuf[16];
1308 struct net_device *dev = n->dev;
1309 int hatype = dev->type;
1310
1311 read_lock(&n->lock);
1312 /* Convert hardware address to XX:XX:XX:XX ... form. */
1313 #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
1314 if (hatype == ARPHRD_AX25 || hatype == ARPHRD_NETROM)
1315 ax2asc2((ax25_address *)n->ha, hbuffer);
1316 else {
1317 #endif
1318 for (k = 0, j = 0; k < HBUFFERLEN - 3 && j < dev->addr_len; j++) {
1319 hbuffer[k++] = hexbuf[(n->ha[j] >> 4) & 15];
1320 hbuffer[k++] = hexbuf[n->ha[j] & 15];
1321 hbuffer[k++] = ':';
1322 }
1323 hbuffer[--k] = 0;
1324 #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
1325 }
1326 #endif
1327 sprintf(tbuf, "%u.%u.%u.%u", NIPQUAD(*(u32*)n->primary_key));
1328 seq_printf(seq, "%-16s 0x%-10x0x%-10x%s * %s\n",
1329 tbuf, hatype, arp_state_to_flags(n), hbuffer, dev->name);
1330 read_unlock(&n->lock);
1331 }
1332
1333 static void arp_format_pneigh_entry(struct seq_file *seq,
1334 struct pneigh_entry *n)
1335 {
1336 struct net_device *dev = n->dev;
1337 int hatype = dev ? dev->type : 0;
1338 char tbuf[16];
1339
1340 sprintf(tbuf, "%u.%u.%u.%u", NIPQUAD(*(u32*)n->key));
1341 seq_printf(seq, "%-16s 0x%-10x0x%-10x%s * %s\n",
1342 tbuf, hatype, ATF_PUBL | ATF_PERM, "00:00:00:00:00:00",
1343 dev ? dev->name : "*");
1344 }
1345
1346 static int arp_seq_show(struct seq_file *seq, void *v)
1347 {
1348 if (v == SEQ_START_TOKEN) {
1349 seq_puts(seq, "IP address HW type Flags "
1350 "HW address Mask Device\n");
1351 } else {
1352 struct neigh_seq_state *state = seq->private;
1353
1354 if (state->flags & NEIGH_SEQ_IS_PNEIGH)
1355 arp_format_pneigh_entry(seq, v);
1356 else
1357 arp_format_neigh_entry(seq, v);
1358 }
1359
1360 return 0;
1361 }
1362
1363 static void *arp_seq_start(struct seq_file *seq, loff_t *pos)
1364 {
1365 /* Don't want to confuse "arp -a" w/ magic entries,
1366 * so we tell the generic iterator to skip NUD_NOARP.
1367 */
1368 return neigh_seq_start(seq, pos, &arp_tbl, NEIGH_SEQ_SKIP_NOARP);
1369 }
1370
1371 /* ------------------------------------------------------------------------ */
1372
1373 static const struct seq_operations arp_seq_ops = {
1374 .start = arp_seq_start,
1375 .next = neigh_seq_next,
1376 .stop = neigh_seq_stop,
1377 .show = arp_seq_show,
1378 };
1379
1380 static int arp_seq_open(struct inode *inode, struct file *file)
1381 {
1382 return seq_open_private(file, &arp_seq_ops,
1383 sizeof(struct neigh_seq_state));
1384 }
1385
1386 static const struct file_operations arp_seq_fops = {
1387 .owner = THIS_MODULE,
1388 .open = arp_seq_open,
1389 .read = seq_read,
1390 .llseek = seq_lseek,
1391 .release = seq_release_private,
1392 };
1393
1394 static int __init arp_proc_init(void)
1395 {
1396 if (!proc_net_fops_create(&init_net, "arp", S_IRUGO, &arp_seq_fops))
1397 return -ENOMEM;
1398 return 0;
1399 }
1400
1401 #else /* CONFIG_PROC_FS */
1402
1403 static int __init arp_proc_init(void)
1404 {
1405 return 0;
1406 }
1407
1408 #endif /* CONFIG_PROC_FS */
1409
1410 EXPORT_SYMBOL(arp_broken_ops);
1411 EXPORT_SYMBOL(arp_find);
1412 EXPORT_SYMBOL(arp_create);
1413 EXPORT_SYMBOL(arp_xmit);
1414 EXPORT_SYMBOL(arp_send);
1415 EXPORT_SYMBOL(arp_tbl);
1416
1417 #if defined(CONFIG_ATM_CLIP) || defined(CONFIG_ATM_CLIP_MODULE)
1418 EXPORT_SYMBOL(clip_tbl_hook);
1419 #endif