2 * Copyright 2002-2005, Instant802 Networks, Inc.
3 * Copyright 2005-2006, Devicescape Software, Inc.
4 * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
5 * Copyright 2007 Johannes Berg <johannes@sipsolutions.net>
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
12 #include <linux/jiffies.h>
13 #include <linux/kernel.h>
14 #include <linux/skbuff.h>
15 #include <linux/netdevice.h>
16 #include <linux/etherdevice.h>
17 #include <linux/rcupdate.h>
18 #include <net/mac80211.h>
19 #include <net/ieee80211_radiotap.h>
21 #include "ieee80211_i.h"
22 #include "driver-ops.h"
30 static u8
ieee80211_sta_manage_reorder_buf(struct ieee80211_hw
*hw
,
31 struct tid_ampdu_rx
*tid_agg_rx
,
36 * monitor mode reception
38 * This function cleans up the SKB, i.e. it removes all the stuff
39 * only useful for monitoring.
41 static struct sk_buff
*remove_monitor_info(struct ieee80211_local
*local
,
45 skb_pull(skb
, rtap_len
);
47 if (local
->hw
.flags
& IEEE80211_HW_RX_INCLUDES_FCS
) {
48 if (likely(skb
->len
> FCS_LEN
))
49 skb_trim(skb
, skb
->len
- FCS_LEN
);
61 static inline int should_drop_frame(struct sk_buff
*skb
,
65 struct ieee80211_rx_status
*status
= IEEE80211_SKB_RXCB(skb
);
66 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*)skb
->data
;
68 if (status
->flag
& (RX_FLAG_FAILED_FCS_CRC
| RX_FLAG_FAILED_PLCP_CRC
))
70 if (unlikely(skb
->len
< 16 + present_fcs_len
+ radiotap_len
))
72 if (ieee80211_is_ctl(hdr
->frame_control
) &&
73 !ieee80211_is_pspoll(hdr
->frame_control
) &&
74 !ieee80211_is_back_req(hdr
->frame_control
))
80 ieee80211_rx_radiotap_len(struct ieee80211_local
*local
,
81 struct ieee80211_rx_status
*status
)
85 /* always present fields */
86 len
= sizeof(struct ieee80211_radiotap_header
) + 9;
88 if (status
->flag
& RX_FLAG_TSFT
)
90 if (local
->hw
.flags
& IEEE80211_HW_SIGNAL_DBM
)
92 if (local
->hw
.flags
& IEEE80211_HW_NOISE_DBM
)
95 if (len
& 1) /* padding for RX_FLAGS if necessary */
98 /* make sure radiotap starts at a naturally aligned address */
100 len
= roundup(len
, 8);
106 * ieee80211_add_rx_radiotap_header - add radiotap header
108 * add a radiotap header containing all the fields which the hardware provided.
111 ieee80211_add_rx_radiotap_header(struct ieee80211_local
*local
,
113 struct ieee80211_rate
*rate
,
116 struct ieee80211_rx_status
*status
= IEEE80211_SKB_RXCB(skb
);
117 struct ieee80211_radiotap_header
*rthdr
;
120 rthdr
= (struct ieee80211_radiotap_header
*)skb_push(skb
, rtap_len
);
121 memset(rthdr
, 0, rtap_len
);
123 /* radiotap header, set always present flags */
125 cpu_to_le32((1 << IEEE80211_RADIOTAP_FLAGS
) |
126 (1 << IEEE80211_RADIOTAP_CHANNEL
) |
127 (1 << IEEE80211_RADIOTAP_ANTENNA
) |
128 (1 << IEEE80211_RADIOTAP_RX_FLAGS
));
129 rthdr
->it_len
= cpu_to_le16(rtap_len
);
131 pos
= (unsigned char *)(rthdr
+1);
133 /* the order of the following fields is important */
135 /* IEEE80211_RADIOTAP_TSFT */
136 if (status
->flag
& RX_FLAG_TSFT
) {
137 *(__le64
*)pos
= cpu_to_le64(status
->mactime
);
139 cpu_to_le32(1 << IEEE80211_RADIOTAP_TSFT
);
143 /* IEEE80211_RADIOTAP_FLAGS */
144 if (local
->hw
.flags
& IEEE80211_HW_RX_INCLUDES_FCS
)
145 *pos
|= IEEE80211_RADIOTAP_F_FCS
;
146 if (status
->flag
& (RX_FLAG_FAILED_FCS_CRC
| RX_FLAG_FAILED_PLCP_CRC
))
147 *pos
|= IEEE80211_RADIOTAP_F_BADFCS
;
148 if (status
->flag
& RX_FLAG_SHORTPRE
)
149 *pos
|= IEEE80211_RADIOTAP_F_SHORTPRE
;
152 /* IEEE80211_RADIOTAP_RATE */
153 if (status
->flag
& RX_FLAG_HT
) {
155 * TODO: add following information into radiotap header once
156 * suitable fields are defined for it:
157 * - MCS index (status->rate_idx)
158 * - HT40 (status->flag & RX_FLAG_40MHZ)
159 * - short-GI (status->flag & RX_FLAG_SHORT_GI)
163 rthdr
->it_present
|= cpu_to_le32(1 << IEEE80211_RADIOTAP_RATE
);
164 *pos
= rate
->bitrate
/ 5;
168 /* IEEE80211_RADIOTAP_CHANNEL */
169 *(__le16
*)pos
= cpu_to_le16(status
->freq
);
171 if (status
->band
== IEEE80211_BAND_5GHZ
)
172 *(__le16
*)pos
= cpu_to_le16(IEEE80211_CHAN_OFDM
|
173 IEEE80211_CHAN_5GHZ
);
174 else if (rate
->flags
& IEEE80211_RATE_ERP_G
)
175 *(__le16
*)pos
= cpu_to_le16(IEEE80211_CHAN_OFDM
|
176 IEEE80211_CHAN_2GHZ
);
178 *(__le16
*)pos
= cpu_to_le16(IEEE80211_CHAN_CCK
|
179 IEEE80211_CHAN_2GHZ
);
182 /* IEEE80211_RADIOTAP_DBM_ANTSIGNAL */
183 if (local
->hw
.flags
& IEEE80211_HW_SIGNAL_DBM
) {
184 *pos
= status
->signal
;
186 cpu_to_le32(1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL
);
190 /* IEEE80211_RADIOTAP_DBM_ANTNOISE */
191 if (local
->hw
.flags
& IEEE80211_HW_NOISE_DBM
) {
192 *pos
= status
->noise
;
194 cpu_to_le32(1 << IEEE80211_RADIOTAP_DBM_ANTNOISE
);
198 /* IEEE80211_RADIOTAP_LOCK_QUALITY is missing */
200 /* IEEE80211_RADIOTAP_ANTENNA */
201 *pos
= status
->antenna
;
204 /* IEEE80211_RADIOTAP_DB_ANTNOISE is not used */
206 /* IEEE80211_RADIOTAP_RX_FLAGS */
207 /* ensure 2 byte alignment for the 2 byte field as required */
208 if ((pos
- (unsigned char *)rthdr
) & 1)
210 if (status
->flag
& RX_FLAG_FAILED_PLCP_CRC
)
211 *(__le16
*)pos
|= cpu_to_le16(IEEE80211_RADIOTAP_F_RX_BADPLCP
);
216 * This function copies a received frame to all monitor interfaces and
217 * returns a cleaned-up SKB that no longer includes the FCS nor the
218 * radiotap header the driver might have added.
220 static struct sk_buff
*
221 ieee80211_rx_monitor(struct ieee80211_local
*local
, struct sk_buff
*origskb
,
222 struct ieee80211_rate
*rate
)
224 struct ieee80211_rx_status
*status
= IEEE80211_SKB_RXCB(origskb
);
225 struct ieee80211_sub_if_data
*sdata
;
226 int needed_headroom
= 0;
227 struct sk_buff
*skb
, *skb2
;
228 struct net_device
*prev_dev
= NULL
;
229 int present_fcs_len
= 0;
233 * First, we may need to make a copy of the skb because
234 * (1) we need to modify it for radiotap (if not present), and
235 * (2) the other RX handlers will modify the skb we got.
237 * We don't need to, of course, if we aren't going to return
238 * the SKB because it has a bad FCS/PLCP checksum.
240 if (status
->flag
& RX_FLAG_RADIOTAP
)
241 rtap_len
= ieee80211_get_radiotap_len(origskb
->data
);
243 /* room for the radiotap header based on driver features */
244 needed_headroom
= ieee80211_rx_radiotap_len(local
, status
);
246 if (local
->hw
.flags
& IEEE80211_HW_RX_INCLUDES_FCS
)
247 present_fcs_len
= FCS_LEN
;
249 if (!local
->monitors
) {
250 if (should_drop_frame(origskb
, present_fcs_len
, rtap_len
)) {
251 dev_kfree_skb(origskb
);
255 return remove_monitor_info(local
, origskb
, rtap_len
);
258 if (should_drop_frame(origskb
, present_fcs_len
, rtap_len
)) {
259 /* only need to expand headroom if necessary */
264 * This shouldn't trigger often because most devices have an
265 * RX header they pull before we get here, and that should
266 * be big enough for our radiotap information. We should
267 * probably export the length to drivers so that we can have
268 * them allocate enough headroom to start with.
270 if (skb_headroom(skb
) < needed_headroom
&&
271 pskb_expand_head(skb
, needed_headroom
, 0, GFP_ATOMIC
)) {
277 * Need to make a copy and possibly remove radiotap header
278 * and FCS from the original.
280 skb
= skb_copy_expand(origskb
, needed_headroom
, 0, GFP_ATOMIC
);
282 origskb
= remove_monitor_info(local
, origskb
, rtap_len
);
288 /* if necessary, prepend radiotap information */
289 if (!(status
->flag
& RX_FLAG_RADIOTAP
))
290 ieee80211_add_rx_radiotap_header(local
, skb
, rate
,
293 skb_reset_mac_header(skb
);
294 skb
->ip_summed
= CHECKSUM_UNNECESSARY
;
295 skb
->pkt_type
= PACKET_OTHERHOST
;
296 skb
->protocol
= htons(ETH_P_802_2
);
298 list_for_each_entry_rcu(sdata
, &local
->interfaces
, list
) {
299 if (!netif_running(sdata
->dev
))
302 if (sdata
->vif
.type
!= NL80211_IFTYPE_MONITOR
)
305 if (sdata
->u
.mntr_flags
& MONITOR_FLAG_COOK_FRAMES
)
309 skb2
= skb_clone(skb
, GFP_ATOMIC
);
311 skb2
->dev
= prev_dev
;
316 prev_dev
= sdata
->dev
;
317 sdata
->dev
->stats
.rx_packets
++;
318 sdata
->dev
->stats
.rx_bytes
+= skb
->len
;
331 static void ieee80211_parse_qos(struct ieee80211_rx_data
*rx
)
333 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*)rx
->skb
->data
;
336 /* does the frame have a qos control field? */
337 if (ieee80211_is_data_qos(hdr
->frame_control
)) {
338 u8
*qc
= ieee80211_get_qos_ctl(hdr
);
339 /* frame has qos control */
340 tid
= *qc
& IEEE80211_QOS_CTL_TID_MASK
;
341 if (*qc
& IEEE80211_QOS_CONTROL_A_MSDU_PRESENT
)
342 rx
->flags
|= IEEE80211_RX_AMSDU
;
344 rx
->flags
&= ~IEEE80211_RX_AMSDU
;
347 * IEEE 802.11-2007, 7.1.3.4.1 ("Sequence Number field"):
349 * Sequence numbers for management frames, QoS data
350 * frames with a broadcast/multicast address in the
351 * Address 1 field, and all non-QoS data frames sent
352 * by QoS STAs are assigned using an additional single
353 * modulo-4096 counter, [...]
355 * We also use that counter for non-QoS STAs.
357 tid
= NUM_RX_DATA_QUEUES
- 1;
361 /* Set skb->priority to 1d tag if highest order bit of TID is not set.
362 * For now, set skb->priority to 0 for other cases. */
363 rx
->skb
->priority
= (tid
> 7) ? 0 : tid
;
367 * DOC: Packet alignment
369 * Drivers always need to pass packets that are aligned to two-byte boundaries
372 * Additionally, should, if possible, align the payload data in a way that
373 * guarantees that the contained IP header is aligned to a four-byte
374 * boundary. In the case of regular frames, this simply means aligning the
375 * payload to a four-byte boundary (because either the IP header is directly
376 * contained, or IV/RFC1042 headers that have a length divisible by four are
379 * With A-MSDU frames, however, the payload data address must yield two modulo
380 * four because there are 14-byte 802.3 headers within the A-MSDU frames that
381 * push the IP header further back to a multiple of four again. Thankfully, the
382 * specs were sane enough this time around to require padding each A-MSDU
383 * subframe to a length that is a multiple of four.
385 * Padding like Atheros hardware adds which is inbetween the 802.11 header and
386 * the payload is not supported, the driver is required to move the 802.11
387 * header to be directly in front of the payload in that case.
389 static void ieee80211_verify_alignment(struct ieee80211_rx_data
*rx
)
391 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*)rx
->skb
->data
;
394 #ifndef CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT
398 if (WARN_ONCE((unsigned long)rx
->skb
->data
& 1,
399 "unaligned packet at 0x%p\n", rx
->skb
->data
))
402 if (!ieee80211_is_data_present(hdr
->frame_control
))
405 hdrlen
= ieee80211_hdrlen(hdr
->frame_control
);
406 if (rx
->flags
& IEEE80211_RX_AMSDU
)
408 WARN_ONCE(((unsigned long)(rx
->skb
->data
+ hdrlen
)) & 3,
409 "unaligned IP payload at 0x%p\n", rx
->skb
->data
+ hdrlen
);
415 static ieee80211_rx_result debug_noinline
416 ieee80211_rx_h_passive_scan(struct ieee80211_rx_data
*rx
)
418 struct ieee80211_local
*local
= rx
->local
;
419 struct sk_buff
*skb
= rx
->skb
;
421 if (unlikely(local
->hw_scanning
))
422 return ieee80211_scan_rx(rx
->sdata
, skb
);
424 if (unlikely(local
->sw_scanning
)) {
425 /* drop all the other packets during a software scan anyway */
426 if (ieee80211_scan_rx(rx
->sdata
, skb
) != RX_QUEUED
)
431 if (unlikely(rx
->flags
& IEEE80211_RX_IN_SCAN
)) {
432 /* scanning finished during invoking of handlers */
433 I802_DEBUG_INC(local
->rx_handlers_drop_passive_scan
);
434 return RX_DROP_UNUSABLE
;
441 static int ieee80211_is_unicast_robust_mgmt_frame(struct sk_buff
*skb
)
443 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*) skb
->data
;
445 if (skb
->len
< 24 || is_multicast_ether_addr(hdr
->addr1
))
448 return ieee80211_is_robust_mgmt_frame(hdr
);
452 static int ieee80211_is_multicast_robust_mgmt_frame(struct sk_buff
*skb
)
454 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*) skb
->data
;
456 if (skb
->len
< 24 || !is_multicast_ether_addr(hdr
->addr1
))
459 return ieee80211_is_robust_mgmt_frame(hdr
);
463 /* Get the BIP key index from MMIE; return -1 if this is not a BIP frame */
464 static int ieee80211_get_mmie_keyidx(struct sk_buff
*skb
)
466 struct ieee80211_mgmt
*hdr
= (struct ieee80211_mgmt
*) skb
->data
;
467 struct ieee80211_mmie
*mmie
;
469 if (skb
->len
< 24 + sizeof(*mmie
) ||
470 !is_multicast_ether_addr(hdr
->da
))
473 if (!ieee80211_is_robust_mgmt_frame((struct ieee80211_hdr
*) hdr
))
474 return -1; /* not a robust management frame */
476 mmie
= (struct ieee80211_mmie
*)
477 (skb
->data
+ skb
->len
- sizeof(*mmie
));
478 if (mmie
->element_id
!= WLAN_EID_MMIE
||
479 mmie
->length
!= sizeof(*mmie
) - 2)
482 return le16_to_cpu(mmie
->key_id
);
486 static ieee80211_rx_result
487 ieee80211_rx_mesh_check(struct ieee80211_rx_data
*rx
)
489 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*)rx
->skb
->data
;
490 unsigned int hdrlen
= ieee80211_hdrlen(hdr
->frame_control
);
492 if (ieee80211_is_data(hdr
->frame_control
)) {
493 if (!ieee80211_has_a4(hdr
->frame_control
))
494 return RX_DROP_MONITOR
;
495 if (memcmp(hdr
->addr4
, rx
->dev
->dev_addr
, ETH_ALEN
) == 0)
496 return RX_DROP_MONITOR
;
499 /* If there is not an established peer link and this is not a peer link
500 * establisment frame, beacon or probe, drop the frame.
503 if (!rx
->sta
|| sta_plink_state(rx
->sta
) != PLINK_ESTAB
) {
504 struct ieee80211_mgmt
*mgmt
;
506 if (!ieee80211_is_mgmt(hdr
->frame_control
))
507 return RX_DROP_MONITOR
;
509 if (ieee80211_is_action(hdr
->frame_control
)) {
510 mgmt
= (struct ieee80211_mgmt
*)hdr
;
511 if (mgmt
->u
.action
.category
!= PLINK_CATEGORY
)
512 return RX_DROP_MONITOR
;
516 if (ieee80211_is_probe_req(hdr
->frame_control
) ||
517 ieee80211_is_probe_resp(hdr
->frame_control
) ||
518 ieee80211_is_beacon(hdr
->frame_control
))
521 return RX_DROP_MONITOR
;
525 #define msh_h_get(h, l) ((struct ieee80211s_hdr *) ((u8 *)h + l))
527 if (ieee80211_is_data(hdr
->frame_control
) &&
528 is_multicast_ether_addr(hdr
->addr1
) &&
529 mesh_rmc_check(hdr
->addr4
, msh_h_get(hdr
, hdrlen
), rx
->sdata
))
530 return RX_DROP_MONITOR
;
537 static ieee80211_rx_result debug_noinline
538 ieee80211_rx_h_check(struct ieee80211_rx_data
*rx
)
540 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*)rx
->skb
->data
;
542 /* Drop duplicate 802.11 retransmissions (IEEE 802.11 Chap. 9.2.9) */
543 if (rx
->sta
&& !is_multicast_ether_addr(hdr
->addr1
)) {
544 if (unlikely(ieee80211_has_retry(hdr
->frame_control
) &&
545 rx
->sta
->last_seq_ctrl
[rx
->queue
] ==
547 if (rx
->flags
& IEEE80211_RX_RA_MATCH
) {
548 rx
->local
->dot11FrameDuplicateCount
++;
549 rx
->sta
->num_duplicates
++;
551 return RX_DROP_MONITOR
;
553 rx
->sta
->last_seq_ctrl
[rx
->queue
] = hdr
->seq_ctrl
;
556 if (unlikely(rx
->skb
->len
< 16)) {
557 I802_DEBUG_INC(rx
->local
->rx_handlers_drop_short
);
558 return RX_DROP_MONITOR
;
561 /* Drop disallowed frame classes based on STA auth/assoc state;
562 * IEEE 802.11, Chap 5.5.
564 * mac80211 filters only based on association state, i.e. it drops
565 * Class 3 frames from not associated stations. hostapd sends
566 * deauth/disassoc frames when needed. In addition, hostapd is
567 * responsible for filtering on both auth and assoc states.
570 if (ieee80211_vif_is_mesh(&rx
->sdata
->vif
))
571 return ieee80211_rx_mesh_check(rx
);
573 if (unlikely((ieee80211_is_data(hdr
->frame_control
) ||
574 ieee80211_is_pspoll(hdr
->frame_control
)) &&
575 rx
->sdata
->vif
.type
!= NL80211_IFTYPE_ADHOC
&&
576 (!rx
->sta
|| !test_sta_flags(rx
->sta
, WLAN_STA_ASSOC
)))) {
577 if ((!ieee80211_has_fromds(hdr
->frame_control
) &&
578 !ieee80211_has_tods(hdr
->frame_control
) &&
579 ieee80211_is_data(hdr
->frame_control
)) ||
580 !(rx
->flags
& IEEE80211_RX_RA_MATCH
)) {
581 /* Drop IBSS frames and frames for other hosts
583 return RX_DROP_MONITOR
;
586 return RX_DROP_MONITOR
;
593 static ieee80211_rx_result debug_noinline
594 ieee80211_rx_h_decrypt(struct ieee80211_rx_data
*rx
)
596 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*)rx
->skb
->data
;
599 ieee80211_rx_result result
= RX_DROP_UNUSABLE
;
600 struct ieee80211_key
*stakey
= NULL
;
601 int mmie_keyidx
= -1;
606 * There are four types of keys:
608 * - IGTK (group keys for management frames)
609 * - PTK (pairwise keys)
610 * - STK (station-to-station pairwise keys)
612 * When selecting a key, we have to distinguish between multicast
613 * (including broadcast) and unicast frames, the latter can only
614 * use PTKs and STKs while the former always use GTKs and IGTKs.
615 * Unless, of course, actual WEP keys ("pre-RSNA") are used, then
616 * unicast frames can also use key indices like GTKs. Hence, if we
617 * don't have a PTK/STK we check the key index for a WEP key.
619 * Note that in a regular BSS, multicast frames are sent by the
620 * AP only, associated stations unicast the frame to the AP first
621 * which then multicasts it on their behalf.
623 * There is also a slight problem in IBSS mode: GTKs are negotiated
624 * with each station, that is something we don't currently handle.
625 * The spec seems to expect that one negotiates the same key with
626 * every station but there's no such requirement; VLANs could be
631 * No point in finding a key and decrypting if the frame is neither
632 * addressed to us nor a multicast frame.
634 if (!(rx
->flags
& IEEE80211_RX_RA_MATCH
))
638 stakey
= rcu_dereference(rx
->sta
->key
);
640 if (!ieee80211_has_protected(hdr
->frame_control
))
641 mmie_keyidx
= ieee80211_get_mmie_keyidx(rx
->skb
);
643 if (!is_multicast_ether_addr(hdr
->addr1
) && stakey
) {
645 /* Skip decryption if the frame is not protected. */
646 if (!ieee80211_has_protected(hdr
->frame_control
))
648 } else if (mmie_keyidx
>= 0) {
649 /* Broadcast/multicast robust management frame / BIP */
650 if ((rx
->status
->flag
& RX_FLAG_DECRYPTED
) &&
651 (rx
->status
->flag
& RX_FLAG_IV_STRIPPED
))
654 if (mmie_keyidx
< NUM_DEFAULT_KEYS
||
655 mmie_keyidx
>= NUM_DEFAULT_KEYS
+ NUM_DEFAULT_MGMT_KEYS
)
656 return RX_DROP_MONITOR
; /* unexpected BIP keyidx */
657 rx
->key
= rcu_dereference(rx
->sdata
->keys
[mmie_keyidx
]);
658 } else if (!ieee80211_has_protected(hdr
->frame_control
)) {
660 * The frame was not protected, so skip decryption. However, we
661 * need to set rx->key if there is a key that could have been
662 * used so that the frame may be dropped if encryption would
663 * have been expected.
665 struct ieee80211_key
*key
= NULL
;
666 if (ieee80211_is_mgmt(hdr
->frame_control
) &&
667 is_multicast_ether_addr(hdr
->addr1
) &&
668 (key
= rcu_dereference(rx
->sdata
->default_mgmt_key
)))
670 else if ((key
= rcu_dereference(rx
->sdata
->default_key
)))
675 * The device doesn't give us the IV so we won't be
676 * able to look up the key. That's ok though, we
677 * don't need to decrypt the frame, we just won't
678 * be able to keep statistics accurate.
679 * Except for key threshold notifications, should
680 * we somehow allow the driver to tell us which key
681 * the hardware used if this flag is set?
683 if ((rx
->status
->flag
& RX_FLAG_DECRYPTED
) &&
684 (rx
->status
->flag
& RX_FLAG_IV_STRIPPED
))
687 hdrlen
= ieee80211_hdrlen(hdr
->frame_control
);
689 if (rx
->skb
->len
< 8 + hdrlen
)
690 return RX_DROP_UNUSABLE
; /* TODO: count this? */
693 * no need to call ieee80211_wep_get_keyidx,
694 * it verifies a bunch of things we've done already
696 keyidx
= rx
->skb
->data
[hdrlen
+ 3] >> 6;
698 rx
->key
= rcu_dereference(rx
->sdata
->keys
[keyidx
]);
701 * RSNA-protected unicast frames should always be sent with
702 * pairwise or station-to-station keys, but for WEP we allow
703 * using a key index as well.
705 if (rx
->key
&& rx
->key
->conf
.alg
!= ALG_WEP
&&
706 !is_multicast_ether_addr(hdr
->addr1
))
711 rx
->key
->tx_rx_count
++;
712 /* TODO: add threshold stuff again */
714 return RX_DROP_MONITOR
;
717 /* Check for weak IVs if possible */
718 if (rx
->sta
&& rx
->key
->conf
.alg
== ALG_WEP
&&
719 ieee80211_is_data(hdr
->frame_control
) &&
720 (!(rx
->status
->flag
& RX_FLAG_IV_STRIPPED
) ||
721 !(rx
->status
->flag
& RX_FLAG_DECRYPTED
)) &&
722 ieee80211_wep_is_weak_iv(rx
->skb
, rx
->key
))
723 rx
->sta
->wep_weak_iv_count
++;
725 switch (rx
->key
->conf
.alg
) {
727 result
= ieee80211_crypto_wep_decrypt(rx
);
730 result
= ieee80211_crypto_tkip_decrypt(rx
);
733 result
= ieee80211_crypto_ccmp_decrypt(rx
);
736 result
= ieee80211_crypto_aes_cmac_decrypt(rx
);
740 /* either the frame has been decrypted or will be dropped */
741 rx
->status
->flag
|= RX_FLAG_DECRYPTED
;
746 static ieee80211_rx_result debug_noinline
747 ieee80211_rx_h_check_more_data(struct ieee80211_rx_data
*rx
)
749 struct ieee80211_local
*local
;
750 struct ieee80211_hdr
*hdr
;
755 hdr
= (struct ieee80211_hdr
*) skb
->data
;
757 if (!local
->pspolling
)
760 if (!ieee80211_has_fromds(hdr
->frame_control
))
761 /* this is not from AP */
764 if (!ieee80211_is_data(hdr
->frame_control
))
767 if (!ieee80211_has_moredata(hdr
->frame_control
)) {
768 /* AP has no more frames buffered for us */
769 local
->pspolling
= false;
773 /* more data bit is set, let's request a new frame from the AP */
774 ieee80211_send_pspoll(local
, rx
->sdata
);
779 static void ap_sta_ps_start(struct sta_info
*sta
)
781 struct ieee80211_sub_if_data
*sdata
= sta
->sdata
;
782 struct ieee80211_local
*local
= sdata
->local
;
784 atomic_inc(&sdata
->bss
->num_sta_ps
);
785 set_and_clear_sta_flags(sta
, WLAN_STA_PS
, WLAN_STA_PSPOLL
);
786 drv_sta_notify(local
, &sdata
->vif
, STA_NOTIFY_SLEEP
, &sta
->sta
);
787 #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
788 printk(KERN_DEBUG
"%s: STA %pM aid %d enters power save mode\n",
789 sdata
->dev
->name
, sta
->sta
.addr
, sta
->sta
.aid
);
790 #endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
793 static int ap_sta_ps_end(struct sta_info
*sta
)
795 struct ieee80211_sub_if_data
*sdata
= sta
->sdata
;
796 struct ieee80211_local
*local
= sdata
->local
;
799 atomic_dec(&sdata
->bss
->num_sta_ps
);
801 clear_sta_flags(sta
, WLAN_STA_PS
| WLAN_STA_PSPOLL
);
802 drv_sta_notify(local
, &sdata
->vif
, STA_NOTIFY_AWAKE
, &sta
->sta
);
804 if (!skb_queue_empty(&sta
->ps_tx_buf
))
805 sta_info_clear_tim_bit(sta
);
807 #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
808 printk(KERN_DEBUG
"%s: STA %pM aid %d exits power save mode\n",
809 sdata
->dev
->name
, sta
->sta
.addr
, sta
->sta
.aid
);
810 #endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
812 /* Send all buffered frames to the station */
813 sent
= ieee80211_add_pending_skbs(local
, &sta
->tx_filtered
);
814 buffered
= ieee80211_add_pending_skbs(local
, &sta
->ps_tx_buf
);
816 local
->total_ps_buffered
-= buffered
;
818 #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
819 printk(KERN_DEBUG
"%s: STA %pM aid %d sending %d filtered/%d PS frames "
820 "since STA not sleeping anymore\n", sdata
->dev
->name
,
821 sta
->sta
.addr
, sta
->sta
.aid
, sent
- buffered
, buffered
);
822 #endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
827 static ieee80211_rx_result debug_noinline
828 ieee80211_rx_h_sta_process(struct ieee80211_rx_data
*rx
)
830 struct sta_info
*sta
= rx
->sta
;
831 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*)rx
->skb
->data
;
837 * Update last_rx only for IBSS packets which are for the current
838 * BSSID to avoid keeping the current IBSS network alive in cases
839 * where other STAs start using different BSSID.
841 if (rx
->sdata
->vif
.type
== NL80211_IFTYPE_ADHOC
) {
842 u8
*bssid
= ieee80211_get_bssid(hdr
, rx
->skb
->len
,
843 NL80211_IFTYPE_ADHOC
);
844 if (compare_ether_addr(bssid
, rx
->sdata
->u
.ibss
.bssid
) == 0)
845 sta
->last_rx
= jiffies
;
846 } else if (!is_multicast_ether_addr(hdr
->addr1
)) {
848 * Mesh beacons will update last_rx when if they are found to
849 * match the current local configuration when processed.
851 sta
->last_rx
= jiffies
;
854 if (!(rx
->flags
& IEEE80211_RX_RA_MATCH
))
857 if (rx
->sdata
->vif
.type
== NL80211_IFTYPE_STATION
)
858 ieee80211_sta_rx_notify(rx
->sdata
, hdr
);
861 sta
->rx_bytes
+= rx
->skb
->len
;
862 sta
->last_signal
= rx
->status
->signal
;
863 sta
->last_qual
= rx
->status
->qual
;
864 sta
->last_noise
= rx
->status
->noise
;
867 * Change STA power saving mode only at the end of a frame
870 if (!ieee80211_has_morefrags(hdr
->frame_control
) &&
871 (rx
->sdata
->vif
.type
== NL80211_IFTYPE_AP
||
872 rx
->sdata
->vif
.type
== NL80211_IFTYPE_AP_VLAN
)) {
873 if (test_sta_flags(sta
, WLAN_STA_PS
)) {
875 * Ignore doze->wake transitions that are
876 * indicated by non-data frames, the standard
877 * is unclear here, but for example going to
878 * PS mode and then scanning would cause a
879 * doze->wake transition for the probe request,
880 * and that is clearly undesirable.
882 if (ieee80211_is_data(hdr
->frame_control
) &&
883 !ieee80211_has_pm(hdr
->frame_control
))
884 rx
->sent_ps_buffered
+= ap_sta_ps_end(sta
);
886 if (ieee80211_has_pm(hdr
->frame_control
))
887 ap_sta_ps_start(sta
);
891 /* Drop data::nullfunc frames silently, since they are used only to
892 * control station power saving mode. */
893 if (ieee80211_is_nullfunc(hdr
->frame_control
)) {
894 I802_DEBUG_INC(rx
->local
->rx_handlers_drop_nullfunc
);
895 /* Update counter and free packet here to avoid counting this
896 * as a dropped packed. */
898 dev_kfree_skb(rx
->skb
);
903 } /* ieee80211_rx_h_sta_process */
905 static inline struct ieee80211_fragment_entry
*
906 ieee80211_reassemble_add(struct ieee80211_sub_if_data
*sdata
,
907 unsigned int frag
, unsigned int seq
, int rx_queue
,
908 struct sk_buff
**skb
)
910 struct ieee80211_fragment_entry
*entry
;
913 idx
= sdata
->fragment_next
;
914 entry
= &sdata
->fragments
[sdata
->fragment_next
++];
915 if (sdata
->fragment_next
>= IEEE80211_FRAGMENT_MAX
)
916 sdata
->fragment_next
= 0;
918 if (!skb_queue_empty(&entry
->skb_list
)) {
919 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
920 struct ieee80211_hdr
*hdr
=
921 (struct ieee80211_hdr
*) entry
->skb_list
.next
->data
;
922 printk(KERN_DEBUG
"%s: RX reassembly removed oldest "
923 "fragment entry (idx=%d age=%lu seq=%d last_frag=%d "
924 "addr1=%pM addr2=%pM\n",
925 sdata
->dev
->name
, idx
,
926 jiffies
- entry
->first_frag_time
, entry
->seq
,
927 entry
->last_frag
, hdr
->addr1
, hdr
->addr2
);
929 __skb_queue_purge(&entry
->skb_list
);
932 __skb_queue_tail(&entry
->skb_list
, *skb
); /* no need for locking */
934 entry
->first_frag_time
= jiffies
;
936 entry
->rx_queue
= rx_queue
;
937 entry
->last_frag
= frag
;
939 entry
->extra_len
= 0;
944 static inline struct ieee80211_fragment_entry
*
945 ieee80211_reassemble_find(struct ieee80211_sub_if_data
*sdata
,
946 unsigned int frag
, unsigned int seq
,
947 int rx_queue
, struct ieee80211_hdr
*hdr
)
949 struct ieee80211_fragment_entry
*entry
;
952 idx
= sdata
->fragment_next
;
953 for (i
= 0; i
< IEEE80211_FRAGMENT_MAX
; i
++) {
954 struct ieee80211_hdr
*f_hdr
;
958 idx
= IEEE80211_FRAGMENT_MAX
- 1;
960 entry
= &sdata
->fragments
[idx
];
961 if (skb_queue_empty(&entry
->skb_list
) || entry
->seq
!= seq
||
962 entry
->rx_queue
!= rx_queue
||
963 entry
->last_frag
+ 1 != frag
)
966 f_hdr
= (struct ieee80211_hdr
*)entry
->skb_list
.next
->data
;
969 * Check ftype and addresses are equal, else check next fragment
971 if (((hdr
->frame_control
^ f_hdr
->frame_control
) &
972 cpu_to_le16(IEEE80211_FCTL_FTYPE
)) ||
973 compare_ether_addr(hdr
->addr1
, f_hdr
->addr1
) != 0 ||
974 compare_ether_addr(hdr
->addr2
, f_hdr
->addr2
) != 0)
977 if (time_after(jiffies
, entry
->first_frag_time
+ 2 * HZ
)) {
978 __skb_queue_purge(&entry
->skb_list
);
987 static ieee80211_rx_result debug_noinline
988 ieee80211_rx_h_defragment(struct ieee80211_rx_data
*rx
)
990 struct ieee80211_hdr
*hdr
;
993 unsigned int frag
, seq
;
994 struct ieee80211_fragment_entry
*entry
;
997 hdr
= (struct ieee80211_hdr
*)rx
->skb
->data
;
998 fc
= hdr
->frame_control
;
999 sc
= le16_to_cpu(hdr
->seq_ctrl
);
1000 frag
= sc
& IEEE80211_SCTL_FRAG
;
1002 if (likely((!ieee80211_has_morefrags(fc
) && frag
== 0) ||
1003 (rx
->skb
)->len
< 24 ||
1004 is_multicast_ether_addr(hdr
->addr1
))) {
1005 /* not fragmented */
1008 I802_DEBUG_INC(rx
->local
->rx_handlers_fragments
);
1010 seq
= (sc
& IEEE80211_SCTL_SEQ
) >> 4;
1013 /* This is the first fragment of a new frame. */
1014 entry
= ieee80211_reassemble_add(rx
->sdata
, frag
, seq
,
1015 rx
->queue
, &(rx
->skb
));
1016 if (rx
->key
&& rx
->key
->conf
.alg
== ALG_CCMP
&&
1017 ieee80211_has_protected(fc
)) {
1018 /* Store CCMP PN so that we can verify that the next
1019 * fragment has a sequential PN value. */
1021 memcpy(entry
->last_pn
,
1022 rx
->key
->u
.ccmp
.rx_pn
[rx
->queue
],
1028 /* This is a fragment for a frame that should already be pending in
1029 * fragment cache. Add this fragment to the end of the pending entry.
1031 entry
= ieee80211_reassemble_find(rx
->sdata
, frag
, seq
, rx
->queue
, hdr
);
1033 I802_DEBUG_INC(rx
->local
->rx_handlers_drop_defrag
);
1034 return RX_DROP_MONITOR
;
1037 /* Verify that MPDUs within one MSDU have sequential PN values.
1038 * (IEEE 802.11i, 8.3.3.4.5) */
1041 u8 pn
[CCMP_PN_LEN
], *rpn
;
1042 if (!rx
->key
|| rx
->key
->conf
.alg
!= ALG_CCMP
)
1043 return RX_DROP_UNUSABLE
;
1044 memcpy(pn
, entry
->last_pn
, CCMP_PN_LEN
);
1045 for (i
= CCMP_PN_LEN
- 1; i
>= 0; i
--) {
1050 rpn
= rx
->key
->u
.ccmp
.rx_pn
[rx
->queue
];
1051 if (memcmp(pn
, rpn
, CCMP_PN_LEN
))
1052 return RX_DROP_UNUSABLE
;
1053 memcpy(entry
->last_pn
, pn
, CCMP_PN_LEN
);
1056 skb_pull(rx
->skb
, ieee80211_hdrlen(fc
));
1057 __skb_queue_tail(&entry
->skb_list
, rx
->skb
);
1058 entry
->last_frag
= frag
;
1059 entry
->extra_len
+= rx
->skb
->len
;
1060 if (ieee80211_has_morefrags(fc
)) {
1065 rx
->skb
= __skb_dequeue(&entry
->skb_list
);
1066 if (skb_tailroom(rx
->skb
) < entry
->extra_len
) {
1067 I802_DEBUG_INC(rx
->local
->rx_expand_skb_head2
);
1068 if (unlikely(pskb_expand_head(rx
->skb
, 0, entry
->extra_len
,
1070 I802_DEBUG_INC(rx
->local
->rx_handlers_drop_defrag
);
1071 __skb_queue_purge(&entry
->skb_list
);
1072 return RX_DROP_UNUSABLE
;
1075 while ((skb
= __skb_dequeue(&entry
->skb_list
))) {
1076 memcpy(skb_put(rx
->skb
, skb
->len
), skb
->data
, skb
->len
);
1080 /* Complete frame has been reassembled - process it now */
1081 rx
->flags
|= IEEE80211_RX_FRAGMENTED
;
1085 rx
->sta
->rx_packets
++;
1086 if (is_multicast_ether_addr(hdr
->addr1
))
1087 rx
->local
->dot11MulticastReceivedFrameCount
++;
1089 ieee80211_led_rx(rx
->local
);
1093 static ieee80211_rx_result debug_noinline
1094 ieee80211_rx_h_ps_poll(struct ieee80211_rx_data
*rx
)
1096 struct ieee80211_sub_if_data
*sdata
= IEEE80211_DEV_TO_SUB_IF(rx
->dev
);
1097 struct sk_buff
*skb
;
1098 int no_pending_pkts
;
1099 __le16 fc
= ((struct ieee80211_hdr
*)rx
->skb
->data
)->frame_control
;
1101 if (likely(!rx
->sta
|| !ieee80211_is_pspoll(fc
) ||
1102 !(rx
->flags
& IEEE80211_RX_RA_MATCH
)))
1105 if ((sdata
->vif
.type
!= NL80211_IFTYPE_AP
) &&
1106 (sdata
->vif
.type
!= NL80211_IFTYPE_AP_VLAN
))
1107 return RX_DROP_UNUSABLE
;
1109 skb
= skb_dequeue(&rx
->sta
->tx_filtered
);
1111 skb
= skb_dequeue(&rx
->sta
->ps_tx_buf
);
1113 rx
->local
->total_ps_buffered
--;
1115 no_pending_pkts
= skb_queue_empty(&rx
->sta
->tx_filtered
) &&
1116 skb_queue_empty(&rx
->sta
->ps_tx_buf
);
1119 struct ieee80211_hdr
*hdr
=
1120 (struct ieee80211_hdr
*) skb
->data
;
1123 * Tell TX path to send one frame even though the STA may
1124 * still remain is PS mode after this frame exchange.
1126 set_sta_flags(rx
->sta
, WLAN_STA_PSPOLL
);
1128 #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
1129 printk(KERN_DEBUG
"STA %pM aid %d: PS Poll (entries after %d)\n",
1130 rx
->sta
->sta
.addr
, rx
->sta
->sta
.aid
,
1131 skb_queue_len(&rx
->sta
->ps_tx_buf
));
1132 #endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
1134 /* Use MoreData flag to indicate whether there are more
1135 * buffered frames for this STA */
1136 if (no_pending_pkts
)
1137 hdr
->frame_control
&= cpu_to_le16(~IEEE80211_FCTL_MOREDATA
);
1139 hdr
->frame_control
|= cpu_to_le16(IEEE80211_FCTL_MOREDATA
);
1141 dev_queue_xmit(skb
);
1143 if (no_pending_pkts
)
1144 sta_info_clear_tim_bit(rx
->sta
);
1145 #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
1146 } else if (!rx
->sent_ps_buffered
) {
1148 * FIXME: This can be the result of a race condition between
1149 * us expiring a frame and the station polling for it.
1150 * Should we send it a null-func frame indicating we
1151 * have nothing buffered for it?
1153 printk(KERN_DEBUG
"%s: STA %pM sent PS Poll even "
1154 "though there are no buffered frames for it\n",
1155 rx
->dev
->name
, rx
->sta
->sta
.addr
);
1156 #endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
1159 /* Free PS Poll skb here instead of returning RX_DROP that would
1160 * count as an dropped frame. */
1161 dev_kfree_skb(rx
->skb
);
1166 static ieee80211_rx_result debug_noinline
1167 ieee80211_rx_h_remove_qos_control(struct ieee80211_rx_data
*rx
)
1169 u8
*data
= rx
->skb
->data
;
1170 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*)data
;
1172 if (!ieee80211_is_data_qos(hdr
->frame_control
))
1175 /* remove the qos control field, update frame type and meta-data */
1176 memmove(data
+ IEEE80211_QOS_CTL_LEN
, data
,
1177 ieee80211_hdrlen(hdr
->frame_control
) - IEEE80211_QOS_CTL_LEN
);
1178 hdr
= (struct ieee80211_hdr
*)skb_pull(rx
->skb
, IEEE80211_QOS_CTL_LEN
);
1179 /* change frame type to non QOS */
1180 hdr
->frame_control
&= ~cpu_to_le16(IEEE80211_STYPE_QOS_DATA
);
1186 ieee80211_802_1x_port_control(struct ieee80211_rx_data
*rx
)
1188 if (unlikely(!rx
->sta
||
1189 !test_sta_flags(rx
->sta
, WLAN_STA_AUTHORIZED
)))
1196 ieee80211_drop_unencrypted(struct ieee80211_rx_data
*rx
, __le16 fc
)
1199 * Pass through unencrypted frames if the hardware has
1200 * decrypted them already.
1202 if (rx
->status
->flag
& RX_FLAG_DECRYPTED
)
1205 /* Drop unencrypted frames if key is set. */
1206 if (unlikely(!ieee80211_has_protected(fc
) &&
1207 !ieee80211_is_nullfunc(fc
) &&
1208 ieee80211_is_data(fc
) &&
1209 (rx
->key
|| rx
->sdata
->drop_unencrypted
)))
1211 if (rx
->sta
&& test_sta_flags(rx
->sta
, WLAN_STA_MFP
)) {
1212 if (unlikely(ieee80211_is_unicast_robust_mgmt_frame(rx
->skb
) &&
1215 /* BIP does not use Protected field, so need to check MMIE */
1216 if (unlikely(ieee80211_is_multicast_robust_mgmt_frame(rx
->skb
)
1217 && ieee80211_get_mmie_keyidx(rx
->skb
) < 0 &&
1221 * When using MFP, Action frames are not allowed prior to
1222 * having configured keys.
1224 if (unlikely(ieee80211_is_action(fc
) && !rx
->key
&&
1225 ieee80211_is_robust_mgmt_frame(
1226 (struct ieee80211_hdr
*) rx
->skb
->data
)))
1234 __ieee80211_data_to_8023(struct ieee80211_rx_data
*rx
)
1236 struct net_device
*dev
= rx
->dev
;
1237 struct ieee80211_sub_if_data
*sdata
= IEEE80211_DEV_TO_SUB_IF(dev
);
1239 return ieee80211_data_to_8023(rx
->skb
, dev
->dev_addr
, sdata
->vif
.type
);
1243 * requires that rx->skb is a frame with ethernet header
1245 static bool ieee80211_frame_allowed(struct ieee80211_rx_data
*rx
, __le16 fc
)
1247 static const u8 pae_group_addr
[ETH_ALEN
] __aligned(2)
1248 = { 0x01, 0x80, 0xC2, 0x00, 0x00, 0x03 };
1249 struct ethhdr
*ehdr
= (struct ethhdr
*) rx
->skb
->data
;
1252 * Allow EAPOL frames to us/the PAE group address regardless
1253 * of whether the frame was encrypted or not.
1255 if (ehdr
->h_proto
== htons(ETH_P_PAE
) &&
1256 (compare_ether_addr(ehdr
->h_dest
, rx
->dev
->dev_addr
) == 0 ||
1257 compare_ether_addr(ehdr
->h_dest
, pae_group_addr
) == 0))
1260 if (ieee80211_802_1x_port_control(rx
) ||
1261 ieee80211_drop_unencrypted(rx
, fc
))
1268 * requires that rx->skb is a frame with ethernet header
1271 ieee80211_deliver_skb(struct ieee80211_rx_data
*rx
)
1273 struct net_device
*dev
= rx
->dev
;
1274 struct ieee80211_local
*local
= rx
->local
;
1275 struct sk_buff
*skb
, *xmit_skb
;
1276 struct ieee80211_sub_if_data
*sdata
= IEEE80211_DEV_TO_SUB_IF(dev
);
1277 struct ethhdr
*ehdr
= (struct ethhdr
*) rx
->skb
->data
;
1278 struct sta_info
*dsta
;
1283 if ((sdata
->vif
.type
== NL80211_IFTYPE_AP
||
1284 sdata
->vif
.type
== NL80211_IFTYPE_AP_VLAN
) &&
1285 !(sdata
->flags
& IEEE80211_SDATA_DONT_BRIDGE_PACKETS
) &&
1286 (rx
->flags
& IEEE80211_RX_RA_MATCH
)) {
1287 if (is_multicast_ether_addr(ehdr
->h_dest
)) {
1289 * send multicast frames both to higher layers in
1290 * local net stack and back to the wireless medium
1292 xmit_skb
= skb_copy(skb
, GFP_ATOMIC
);
1293 if (!xmit_skb
&& net_ratelimit())
1294 printk(KERN_DEBUG
"%s: failed to clone "
1295 "multicast frame\n", dev
->name
);
1297 dsta
= sta_info_get(local
, skb
->data
);
1298 if (dsta
&& dsta
->sdata
->dev
== dev
) {
1300 * The destination station is associated to
1301 * this AP (in this VLAN), so send the frame
1302 * directly to it and do not pass it to local
1312 int align __maybe_unused
;
1314 #if defined(CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT) || !defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS)
1316 * 'align' will only take the values 0 or 2 here
1317 * since all frames are required to be aligned
1318 * to 2-byte boundaries when being passed to
1319 * mac80211. That also explains the __skb_push()
1322 align
= ((unsigned long)(skb
->data
+ sizeof(struct ethhdr
))) & 3;
1324 if (WARN_ON(skb_headroom(skb
) < 3)) {
1328 u8
*data
= skb
->data
;
1329 size_t len
= skb
->len
;
1330 u8
*new = __skb_push(skb
, align
);
1331 memmove(new, data
, len
);
1332 __skb_trim(skb
, len
);
1338 /* deliver to local stack */
1339 skb
->protocol
= eth_type_trans(skb
, dev
);
1340 memset(skb
->cb
, 0, sizeof(skb
->cb
));
1346 /* send to wireless media */
1347 xmit_skb
->protocol
= htons(ETH_P_802_3
);
1348 skb_reset_network_header(xmit_skb
);
1349 skb_reset_mac_header(xmit_skb
);
1350 dev_queue_xmit(xmit_skb
);
1354 static ieee80211_rx_result debug_noinline
1355 ieee80211_rx_h_amsdu(struct ieee80211_rx_data
*rx
)
1357 struct net_device
*dev
= rx
->dev
;
1358 struct ieee80211_local
*local
= rx
->local
;
1361 struct sk_buff
*skb
= rx
->skb
, *frame
= NULL
;
1362 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*)skb
->data
;
1363 __le16 fc
= hdr
->frame_control
;
1364 const struct ethhdr
*eth
;
1369 if (unlikely(!ieee80211_is_data(fc
)))
1372 if (unlikely(!ieee80211_is_data_present(fc
)))
1373 return RX_DROP_MONITOR
;
1375 if (!(rx
->flags
& IEEE80211_RX_AMSDU
))
1378 err
= __ieee80211_data_to_8023(rx
);
1380 return RX_DROP_UNUSABLE
;
1384 dev
->stats
.rx_packets
++;
1385 dev
->stats
.rx_bytes
+= skb
->len
;
1387 /* skip the wrapping header */
1388 eth
= (struct ethhdr
*) skb_pull(skb
, sizeof(struct ethhdr
));
1390 return RX_DROP_UNUSABLE
;
1392 while (skb
!= frame
) {
1394 __be16 len
= eth
->h_proto
;
1395 unsigned int subframe_len
= sizeof(struct ethhdr
) + ntohs(len
);
1397 remaining
= skb
->len
;
1398 memcpy(dst
, eth
->h_dest
, ETH_ALEN
);
1399 memcpy(src
, eth
->h_source
, ETH_ALEN
);
1401 padding
= ((4 - subframe_len
) & 0x3);
1402 /* the last MSDU has no padding */
1403 if (subframe_len
> remaining
)
1404 return RX_DROP_UNUSABLE
;
1406 skb_pull(skb
, sizeof(struct ethhdr
));
1407 /* if last subframe reuse skb */
1408 if (remaining
<= subframe_len
+ padding
)
1412 * Allocate and reserve two bytes more for payload
1413 * alignment since sizeof(struct ethhdr) is 14.
1415 frame
= dev_alloc_skb(
1416 ALIGN(local
->hw
.extra_tx_headroom
, 4) +
1420 return RX_DROP_UNUSABLE
;
1423 ALIGN(local
->hw
.extra_tx_headroom
, 4) +
1424 sizeof(struct ethhdr
) + 2);
1425 memcpy(skb_put(frame
, ntohs(len
)), skb
->data
,
1428 eth
= (struct ethhdr
*) skb_pull(skb
, ntohs(len
) +
1431 dev_kfree_skb(frame
);
1432 return RX_DROP_UNUSABLE
;
1436 skb_reset_network_header(frame
);
1438 frame
->priority
= skb
->priority
;
1441 payload
= frame
->data
;
1442 ethertype
= (payload
[6] << 8) | payload
[7];
1444 if (likely((compare_ether_addr(payload
, rfc1042_header
) == 0 &&
1445 ethertype
!= ETH_P_AARP
&& ethertype
!= ETH_P_IPX
) ||
1446 compare_ether_addr(payload
,
1447 bridge_tunnel_header
) == 0)) {
1448 /* remove RFC1042 or Bridge-Tunnel
1449 * encapsulation and replace EtherType */
1451 memcpy(skb_push(frame
, ETH_ALEN
), src
, ETH_ALEN
);
1452 memcpy(skb_push(frame
, ETH_ALEN
), dst
, ETH_ALEN
);
1454 memcpy(skb_push(frame
, sizeof(__be16
)),
1455 &len
, sizeof(__be16
));
1456 memcpy(skb_push(frame
, ETH_ALEN
), src
, ETH_ALEN
);
1457 memcpy(skb_push(frame
, ETH_ALEN
), dst
, ETH_ALEN
);
1460 if (!ieee80211_frame_allowed(rx
, fc
)) {
1461 if (skb
== frame
) /* last frame */
1462 return RX_DROP_UNUSABLE
;
1463 dev_kfree_skb(frame
);
1467 ieee80211_deliver_skb(rx
);
1473 #ifdef CONFIG_MAC80211_MESH
1474 static ieee80211_rx_result
1475 ieee80211_rx_h_mesh_fwding(struct ieee80211_rx_data
*rx
)
1477 struct ieee80211_hdr
*hdr
;
1478 struct ieee80211s_hdr
*mesh_hdr
;
1479 unsigned int hdrlen
;
1480 struct sk_buff
*skb
= rx
->skb
, *fwd_skb
;
1482 hdr
= (struct ieee80211_hdr
*) skb
->data
;
1483 hdrlen
= ieee80211_hdrlen(hdr
->frame_control
);
1484 mesh_hdr
= (struct ieee80211s_hdr
*) (skb
->data
+ hdrlen
);
1486 if (!ieee80211_is_data(hdr
->frame_control
))
1491 return RX_DROP_MONITOR
;
1493 if (mesh_hdr
->flags
& MESH_FLAGS_AE_A5_A6
){
1494 struct ieee80211_sub_if_data
*sdata
;
1495 struct mesh_path
*mppath
;
1497 sdata
= IEEE80211_DEV_TO_SUB_IF(rx
->dev
);
1499 mppath
= mpp_path_lookup(mesh_hdr
->eaddr2
, sdata
);
1501 mpp_path_add(mesh_hdr
->eaddr2
, hdr
->addr4
, sdata
);
1503 spin_lock_bh(&mppath
->state_lock
);
1504 mppath
->exp_time
= jiffies
;
1505 if (compare_ether_addr(mppath
->mpp
, hdr
->addr4
) != 0)
1506 memcpy(mppath
->mpp
, hdr
->addr4
, ETH_ALEN
);
1507 spin_unlock_bh(&mppath
->state_lock
);
1512 if (compare_ether_addr(rx
->dev
->dev_addr
, hdr
->addr3
) == 0)
1517 if (rx
->flags
& IEEE80211_RX_RA_MATCH
) {
1519 IEEE80211_IFSTA_MESH_CTR_INC(&rx
->sdata
->u
.mesh
,
1520 dropped_frames_ttl
);
1522 struct ieee80211_hdr
*fwd_hdr
;
1523 fwd_skb
= skb_copy(skb
, GFP_ATOMIC
);
1525 if (!fwd_skb
&& net_ratelimit())
1526 printk(KERN_DEBUG
"%s: failed to clone mesh frame\n",
1529 fwd_hdr
= (struct ieee80211_hdr
*) fwd_skb
->data
;
1531 * Save TA to addr1 to send TA a path error if a
1532 * suitable next hop is not found
1534 memcpy(fwd_hdr
->addr1
, fwd_hdr
->addr2
, ETH_ALEN
);
1535 memcpy(fwd_hdr
->addr2
, rx
->dev
->dev_addr
, ETH_ALEN
);
1536 fwd_skb
->dev
= rx
->local
->mdev
;
1537 fwd_skb
->iif
= rx
->dev
->ifindex
;
1538 dev_queue_xmit(fwd_skb
);
1542 if (is_multicast_ether_addr(hdr
->addr3
) ||
1543 rx
->dev
->flags
& IFF_PROMISC
)
1546 return RX_DROP_MONITOR
;
1550 static ieee80211_rx_result debug_noinline
1551 ieee80211_rx_h_data(struct ieee80211_rx_data
*rx
)
1553 struct net_device
*dev
= rx
->dev
;
1554 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*)rx
->skb
->data
;
1555 __le16 fc
= hdr
->frame_control
;
1558 if (unlikely(!ieee80211_is_data(hdr
->frame_control
)))
1561 if (unlikely(!ieee80211_is_data_present(hdr
->frame_control
)))
1562 return RX_DROP_MONITOR
;
1564 err
= __ieee80211_data_to_8023(rx
);
1566 return RX_DROP_UNUSABLE
;
1568 if (!ieee80211_frame_allowed(rx
, fc
))
1569 return RX_DROP_MONITOR
;
1573 dev
->stats
.rx_packets
++;
1574 dev
->stats
.rx_bytes
+= rx
->skb
->len
;
1576 ieee80211_deliver_skb(rx
);
1581 static ieee80211_rx_result debug_noinline
1582 ieee80211_rx_h_ctrl(struct ieee80211_rx_data
*rx
)
1584 struct ieee80211_local
*local
= rx
->local
;
1585 struct ieee80211_hw
*hw
= &local
->hw
;
1586 struct sk_buff
*skb
= rx
->skb
;
1587 struct ieee80211_bar
*bar
= (struct ieee80211_bar
*)skb
->data
;
1588 struct tid_ampdu_rx
*tid_agg_rx
;
1592 if (likely(!ieee80211_is_ctl(bar
->frame_control
)))
1595 if (ieee80211_is_back_req(bar
->frame_control
)) {
1598 tid
= le16_to_cpu(bar
->control
) >> 12;
1599 if (rx
->sta
->ampdu_mlme
.tid_state_rx
[tid
]
1600 != HT_AGG_STATE_OPERATIONAL
)
1602 tid_agg_rx
= rx
->sta
->ampdu_mlme
.tid_rx
[tid
];
1604 start_seq_num
= le16_to_cpu(bar
->start_seq_num
) >> 4;
1606 /* reset session timer */
1607 if (tid_agg_rx
->timeout
)
1608 mod_timer(&tid_agg_rx
->session_timer
,
1609 TU_TO_EXP_TIME(tid_agg_rx
->timeout
));
1611 /* manage reordering buffer according to requested */
1612 /* sequence number */
1614 ieee80211_sta_manage_reorder_buf(hw
, tid_agg_rx
, NULL
,
1617 return RX_DROP_UNUSABLE
;
1623 static void ieee80211_process_sa_query_req(struct ieee80211_sub_if_data
*sdata
,
1624 struct ieee80211_mgmt
*mgmt
,
1627 struct ieee80211_local
*local
= sdata
->local
;
1628 struct sk_buff
*skb
;
1629 struct ieee80211_mgmt
*resp
;
1631 if (compare_ether_addr(mgmt
->da
, sdata
->dev
->dev_addr
) != 0) {
1632 /* Not to own unicast address */
1636 if (compare_ether_addr(mgmt
->sa
, sdata
->u
.mgd
.bssid
) != 0 ||
1637 compare_ether_addr(mgmt
->bssid
, sdata
->u
.mgd
.bssid
) != 0) {
1638 /* Not from the current AP or not associated yet. */
1642 if (len
< 24 + 1 + sizeof(resp
->u
.action
.u
.sa_query
)) {
1643 /* Too short SA Query request frame */
1647 skb
= dev_alloc_skb(sizeof(*resp
) + local
->hw
.extra_tx_headroom
);
1651 skb_reserve(skb
, local
->hw
.extra_tx_headroom
);
1652 resp
= (struct ieee80211_mgmt
*) skb_put(skb
, 24);
1653 memset(resp
, 0, 24);
1654 memcpy(resp
->da
, mgmt
->sa
, ETH_ALEN
);
1655 memcpy(resp
->sa
, sdata
->dev
->dev_addr
, ETH_ALEN
);
1656 memcpy(resp
->bssid
, sdata
->u
.mgd
.bssid
, ETH_ALEN
);
1657 resp
->frame_control
= cpu_to_le16(IEEE80211_FTYPE_MGMT
|
1658 IEEE80211_STYPE_ACTION
);
1659 skb_put(skb
, 1 + sizeof(resp
->u
.action
.u
.sa_query
));
1660 resp
->u
.action
.category
= WLAN_CATEGORY_SA_QUERY
;
1661 resp
->u
.action
.u
.sa_query
.action
= WLAN_ACTION_SA_QUERY_RESPONSE
;
1662 memcpy(resp
->u
.action
.u
.sa_query
.trans_id
,
1663 mgmt
->u
.action
.u
.sa_query
.trans_id
,
1664 WLAN_SA_QUERY_TR_ID_LEN
);
1666 ieee80211_tx_skb(sdata
, skb
, 1);
1669 static ieee80211_rx_result debug_noinline
1670 ieee80211_rx_h_action(struct ieee80211_rx_data
*rx
)
1672 struct ieee80211_local
*local
= rx
->local
;
1673 struct ieee80211_sub_if_data
*sdata
= IEEE80211_DEV_TO_SUB_IF(rx
->dev
);
1674 struct ieee80211_mgmt
*mgmt
= (struct ieee80211_mgmt
*) rx
->skb
->data
;
1675 int len
= rx
->skb
->len
;
1677 if (!ieee80211_is_action(mgmt
->frame_control
))
1681 return RX_DROP_MONITOR
;
1683 if (!(rx
->flags
& IEEE80211_RX_RA_MATCH
))
1684 return RX_DROP_MONITOR
;
1686 if (ieee80211_drop_unencrypted(rx
, mgmt
->frame_control
))
1687 return RX_DROP_MONITOR
;
1689 /* all categories we currently handle have action_code */
1690 if (len
< IEEE80211_MIN_ACTION_SIZE
+ 1)
1691 return RX_DROP_MONITOR
;
1693 switch (mgmt
->u
.action
.category
) {
1694 case WLAN_CATEGORY_BACK
:
1696 * The aggregation code is not prepared to handle
1697 * anything but STA/AP due to the BSSID handling;
1698 * IBSS could work in the code but isn't supported
1699 * by drivers or the standard.
1701 if (sdata
->vif
.type
!= NL80211_IFTYPE_STATION
&&
1702 sdata
->vif
.type
!= NL80211_IFTYPE_AP_VLAN
&&
1703 sdata
->vif
.type
!= NL80211_IFTYPE_AP
)
1704 return RX_DROP_MONITOR
;
1706 switch (mgmt
->u
.action
.u
.addba_req
.action_code
) {
1707 case WLAN_ACTION_ADDBA_REQ
:
1708 if (len
< (IEEE80211_MIN_ACTION_SIZE
+
1709 sizeof(mgmt
->u
.action
.u
.addba_req
)))
1710 return RX_DROP_MONITOR
;
1711 ieee80211_process_addba_request(local
, rx
->sta
, mgmt
, len
);
1713 case WLAN_ACTION_ADDBA_RESP
:
1714 if (len
< (IEEE80211_MIN_ACTION_SIZE
+
1715 sizeof(mgmt
->u
.action
.u
.addba_resp
)))
1716 return RX_DROP_MONITOR
;
1717 ieee80211_process_addba_resp(local
, rx
->sta
, mgmt
, len
);
1719 case WLAN_ACTION_DELBA
:
1720 if (len
< (IEEE80211_MIN_ACTION_SIZE
+
1721 sizeof(mgmt
->u
.action
.u
.delba
)))
1722 return RX_DROP_MONITOR
;
1723 ieee80211_process_delba(sdata
, rx
->sta
, mgmt
, len
);
1727 case WLAN_CATEGORY_SPECTRUM_MGMT
:
1728 if (local
->hw
.conf
.channel
->band
!= IEEE80211_BAND_5GHZ
)
1729 return RX_DROP_MONITOR
;
1731 if (sdata
->vif
.type
!= NL80211_IFTYPE_STATION
)
1732 return RX_DROP_MONITOR
;
1734 switch (mgmt
->u
.action
.u
.measurement
.action_code
) {
1735 case WLAN_ACTION_SPCT_MSR_REQ
:
1736 if (len
< (IEEE80211_MIN_ACTION_SIZE
+
1737 sizeof(mgmt
->u
.action
.u
.measurement
)))
1738 return RX_DROP_MONITOR
;
1739 ieee80211_process_measurement_req(sdata
, mgmt
, len
);
1741 case WLAN_ACTION_SPCT_CHL_SWITCH
:
1742 if (len
< (IEEE80211_MIN_ACTION_SIZE
+
1743 sizeof(mgmt
->u
.action
.u
.chan_switch
)))
1744 return RX_DROP_MONITOR
;
1746 if (sdata
->vif
.type
!= NL80211_IFTYPE_STATION
)
1747 return RX_DROP_MONITOR
;
1749 if (memcmp(mgmt
->bssid
, sdata
->u
.mgd
.bssid
, ETH_ALEN
))
1750 return RX_DROP_MONITOR
;
1752 return ieee80211_sta_rx_mgmt(sdata
, rx
->skb
);
1755 case WLAN_CATEGORY_SA_QUERY
:
1756 if (len
< (IEEE80211_MIN_ACTION_SIZE
+
1757 sizeof(mgmt
->u
.action
.u
.sa_query
)))
1758 return RX_DROP_MONITOR
;
1759 switch (mgmt
->u
.action
.u
.sa_query
.action
) {
1760 case WLAN_ACTION_SA_QUERY_REQUEST
:
1761 if (sdata
->vif
.type
!= NL80211_IFTYPE_STATION
)
1762 return RX_DROP_MONITOR
;
1763 ieee80211_process_sa_query_req(sdata
, mgmt
, len
);
1765 case WLAN_ACTION_SA_QUERY_RESPONSE
:
1767 * SA Query response is currently only used in AP mode
1768 * and it is processed in user space.
1777 rx
->sta
->rx_packets
++;
1778 dev_kfree_skb(rx
->skb
);
1782 static ieee80211_rx_result debug_noinline
1783 ieee80211_rx_h_mgmt(struct ieee80211_rx_data
*rx
)
1785 struct ieee80211_sub_if_data
*sdata
= IEEE80211_DEV_TO_SUB_IF(rx
->dev
);
1786 struct ieee80211_mgmt
*mgmt
= (struct ieee80211_mgmt
*) rx
->skb
->data
;
1788 if (!(rx
->flags
& IEEE80211_RX_RA_MATCH
))
1789 return RX_DROP_MONITOR
;
1791 if (ieee80211_drop_unencrypted(rx
, mgmt
->frame_control
))
1792 return RX_DROP_MONITOR
;
1794 if (ieee80211_vif_is_mesh(&sdata
->vif
))
1795 return ieee80211_mesh_rx_mgmt(sdata
, rx
->skb
);
1797 if (sdata
->vif
.type
== NL80211_IFTYPE_ADHOC
)
1798 return ieee80211_ibss_rx_mgmt(sdata
, rx
->skb
);
1800 if (sdata
->vif
.type
== NL80211_IFTYPE_STATION
)
1801 return ieee80211_sta_rx_mgmt(sdata
, rx
->skb
);
1803 return RX_DROP_MONITOR
;
1806 static void ieee80211_rx_michael_mic_report(struct net_device
*dev
,
1807 struct ieee80211_hdr
*hdr
,
1808 struct ieee80211_rx_data
*rx
)
1811 unsigned int hdrlen
;
1813 hdrlen
= ieee80211_hdrlen(hdr
->frame_control
);
1814 if (rx
->skb
->len
>= hdrlen
+ 4)
1815 keyidx
= rx
->skb
->data
[hdrlen
+ 3] >> 6;
1821 * Some hardware seem to generate incorrect Michael MIC
1822 * reports; ignore them to avoid triggering countermeasures.
1827 if (!ieee80211_has_protected(hdr
->frame_control
))
1830 if (rx
->sdata
->vif
.type
== NL80211_IFTYPE_AP
&& keyidx
) {
1832 * APs with pairwise keys should never receive Michael MIC
1833 * errors for non-zero keyidx because these are reserved for
1834 * group keys and only the AP is sending real multicast
1835 * frames in the BSS.
1840 if (!ieee80211_is_data(hdr
->frame_control
) &&
1841 !ieee80211_is_auth(hdr
->frame_control
))
1844 mac80211_ev_michael_mic_failure(rx
->sdata
, keyidx
, hdr
, NULL
,
1847 dev_kfree_skb(rx
->skb
);
1851 /* TODO: use IEEE80211_RX_FRAGMENTED */
1852 static void ieee80211_rx_cooked_monitor(struct ieee80211_rx_data
*rx
)
1854 struct ieee80211_sub_if_data
*sdata
;
1855 struct ieee80211_local
*local
= rx
->local
;
1856 struct ieee80211_rtap_hdr
{
1857 struct ieee80211_radiotap_header hdr
;
1862 } __attribute__ ((packed
)) *rthdr
;
1863 struct sk_buff
*skb
= rx
->skb
, *skb2
;
1864 struct net_device
*prev_dev
= NULL
;
1865 struct ieee80211_rx_status
*status
= rx
->status
;
1867 if (rx
->flags
& IEEE80211_RX_CMNTR_REPORTED
)
1870 if (skb_headroom(skb
) < sizeof(*rthdr
) &&
1871 pskb_expand_head(skb
, sizeof(*rthdr
), 0, GFP_ATOMIC
))
1874 rthdr
= (void *)skb_push(skb
, sizeof(*rthdr
));
1875 memset(rthdr
, 0, sizeof(*rthdr
));
1876 rthdr
->hdr
.it_len
= cpu_to_le16(sizeof(*rthdr
));
1877 rthdr
->hdr
.it_present
=
1878 cpu_to_le32((1 << IEEE80211_RADIOTAP_FLAGS
) |
1879 (1 << IEEE80211_RADIOTAP_RATE
) |
1880 (1 << IEEE80211_RADIOTAP_CHANNEL
));
1882 rthdr
->rate
= rx
->rate
->bitrate
/ 5;
1883 rthdr
->chan_freq
= cpu_to_le16(status
->freq
);
1885 if (status
->band
== IEEE80211_BAND_5GHZ
)
1886 rthdr
->chan_flags
= cpu_to_le16(IEEE80211_CHAN_OFDM
|
1887 IEEE80211_CHAN_5GHZ
);
1889 rthdr
->chan_flags
= cpu_to_le16(IEEE80211_CHAN_DYN
|
1890 IEEE80211_CHAN_2GHZ
);
1892 skb_set_mac_header(skb
, 0);
1893 skb
->ip_summed
= CHECKSUM_UNNECESSARY
;
1894 skb
->pkt_type
= PACKET_OTHERHOST
;
1895 skb
->protocol
= htons(ETH_P_802_2
);
1897 list_for_each_entry_rcu(sdata
, &local
->interfaces
, list
) {
1898 if (!netif_running(sdata
->dev
))
1901 if (sdata
->vif
.type
!= NL80211_IFTYPE_MONITOR
||
1902 !(sdata
->u
.mntr_flags
& MONITOR_FLAG_COOK_FRAMES
))
1906 skb2
= skb_clone(skb
, GFP_ATOMIC
);
1908 skb2
->dev
= prev_dev
;
1913 prev_dev
= sdata
->dev
;
1914 sdata
->dev
->stats
.rx_packets
++;
1915 sdata
->dev
->stats
.rx_bytes
+= skb
->len
;
1919 skb
->dev
= prev_dev
;
1925 rx
->flags
|= IEEE80211_RX_CMNTR_REPORTED
;
1933 static void ieee80211_invoke_rx_handlers(struct ieee80211_sub_if_data
*sdata
,
1934 struct ieee80211_rx_data
*rx
,
1935 struct sk_buff
*skb
)
1937 ieee80211_rx_result res
= RX_DROP_MONITOR
;
1941 rx
->dev
= sdata
->dev
;
1943 #define CALL_RXH(rxh) \
1946 if (res != RX_CONTINUE) \
1950 CALL_RXH(ieee80211_rx_h_passive_scan
)
1951 CALL_RXH(ieee80211_rx_h_check
)
1952 CALL_RXH(ieee80211_rx_h_decrypt
)
1953 CALL_RXH(ieee80211_rx_h_check_more_data
)
1954 CALL_RXH(ieee80211_rx_h_sta_process
)
1955 CALL_RXH(ieee80211_rx_h_defragment
)
1956 CALL_RXH(ieee80211_rx_h_ps_poll
)
1957 CALL_RXH(ieee80211_rx_h_michael_mic_verify
)
1958 /* must be after MMIC verify so header is counted in MPDU mic */
1959 CALL_RXH(ieee80211_rx_h_remove_qos_control
)
1960 CALL_RXH(ieee80211_rx_h_amsdu
)
1961 #ifdef CONFIG_MAC80211_MESH
1962 if (ieee80211_vif_is_mesh(&sdata
->vif
))
1963 CALL_RXH(ieee80211_rx_h_mesh_fwding
);
1965 CALL_RXH(ieee80211_rx_h_data
)
1966 CALL_RXH(ieee80211_rx_h_ctrl
)
1967 CALL_RXH(ieee80211_rx_h_action
)
1968 CALL_RXH(ieee80211_rx_h_mgmt
)
1974 case RX_DROP_MONITOR
:
1975 I802_DEBUG_INC(sdata
->local
->rx_handlers_drop
);
1977 rx
->sta
->rx_dropped
++;
1980 ieee80211_rx_cooked_monitor(rx
);
1982 case RX_DROP_UNUSABLE
:
1983 I802_DEBUG_INC(sdata
->local
->rx_handlers_drop
);
1985 rx
->sta
->rx_dropped
++;
1986 dev_kfree_skb(rx
->skb
);
1989 I802_DEBUG_INC(sdata
->local
->rx_handlers_queued
);
1994 /* main receive path */
1996 static int prepare_for_handlers(struct ieee80211_sub_if_data
*sdata
,
1997 struct ieee80211_rx_data
*rx
,
1998 struct ieee80211_hdr
*hdr
)
2000 u8
*bssid
= ieee80211_get_bssid(hdr
, rx
->skb
->len
, sdata
->vif
.type
);
2001 int multicast
= is_multicast_ether_addr(hdr
->addr1
);
2003 switch (sdata
->vif
.type
) {
2004 case NL80211_IFTYPE_STATION
:
2008 compare_ether_addr(sdata
->dev
->dev_addr
, hdr
->addr1
) != 0) {
2009 if (!(sdata
->dev
->flags
& IFF_PROMISC
))
2011 rx
->flags
&= ~IEEE80211_RX_RA_MATCH
;
2014 case NL80211_IFTYPE_ADHOC
:
2017 if (ieee80211_is_beacon(hdr
->frame_control
)) {
2020 else if (!ieee80211_bssid_match(bssid
, sdata
->u
.ibss
.bssid
)) {
2021 if (!(rx
->flags
& IEEE80211_RX_IN_SCAN
))
2023 rx
->flags
&= ~IEEE80211_RX_RA_MATCH
;
2024 } else if (!multicast
&&
2025 compare_ether_addr(sdata
->dev
->dev_addr
,
2027 if (!(sdata
->dev
->flags
& IFF_PROMISC
))
2029 rx
->flags
&= ~IEEE80211_RX_RA_MATCH
;
2030 } else if (!rx
->sta
) {
2032 if (rx
->status
->flag
& RX_FLAG_HT
)
2033 rate_idx
= 0; /* TODO: HT rates */
2035 rate_idx
= rx
->status
->rate_idx
;
2036 rx
->sta
= ieee80211_ibss_add_sta(sdata
, bssid
, hdr
->addr2
,
2040 case NL80211_IFTYPE_MESH_POINT
:
2042 compare_ether_addr(sdata
->dev
->dev_addr
,
2044 if (!(sdata
->dev
->flags
& IFF_PROMISC
))
2047 rx
->flags
&= ~IEEE80211_RX_RA_MATCH
;
2050 case NL80211_IFTYPE_AP_VLAN
:
2051 case NL80211_IFTYPE_AP
:
2053 if (compare_ether_addr(sdata
->dev
->dev_addr
,
2056 } else if (!ieee80211_bssid_match(bssid
,
2057 sdata
->dev
->dev_addr
)) {
2058 if (!(rx
->flags
& IEEE80211_RX_IN_SCAN
))
2060 rx
->flags
&= ~IEEE80211_RX_RA_MATCH
;
2063 case NL80211_IFTYPE_WDS
:
2064 if (bssid
|| !ieee80211_is_data(hdr
->frame_control
))
2066 if (compare_ether_addr(sdata
->u
.wds
.remote_addr
, hdr
->addr2
))
2069 case NL80211_IFTYPE_MONITOR
:
2070 /* take everything */
2072 case NL80211_IFTYPE_UNSPECIFIED
:
2073 case __NL80211_IFTYPE_AFTER_LAST
:
2074 /* should never get here */
2083 * This is the actual Rx frames handler. as it blongs to Rx path it must
2084 * be called with rcu_read_lock protection.
2086 static void __ieee80211_rx_handle_packet(struct ieee80211_hw
*hw
,
2087 struct sk_buff
*skb
,
2088 struct ieee80211_rate
*rate
)
2090 struct ieee80211_rx_status
*status
= IEEE80211_SKB_RXCB(skb
);
2091 struct ieee80211_local
*local
= hw_to_local(hw
);
2092 struct ieee80211_sub_if_data
*sdata
;
2093 struct ieee80211_hdr
*hdr
;
2094 struct ieee80211_rx_data rx
;
2096 struct ieee80211_sub_if_data
*prev
= NULL
;
2097 struct sk_buff
*skb_new
;
2099 hdr
= (struct ieee80211_hdr
*)skb
->data
;
2100 memset(&rx
, 0, sizeof(rx
));
2107 if (ieee80211_is_data(hdr
->frame_control
) || ieee80211_is_mgmt(hdr
->frame_control
))
2108 local
->dot11ReceivedFragmentCount
++;
2110 rx
.sta
= sta_info_get(local
, hdr
->addr2
);
2112 rx
.sdata
= rx
.sta
->sdata
;
2113 rx
.dev
= rx
.sta
->sdata
->dev
;
2116 if ((status
->flag
& RX_FLAG_MMIC_ERROR
)) {
2117 ieee80211_rx_michael_mic_report(local
->mdev
, hdr
, &rx
);
2121 if (unlikely(local
->sw_scanning
|| local
->hw_scanning
))
2122 rx
.flags
|= IEEE80211_RX_IN_SCAN
;
2124 ieee80211_parse_qos(&rx
);
2125 ieee80211_verify_alignment(&rx
);
2129 list_for_each_entry_rcu(sdata
, &local
->interfaces
, list
) {
2130 if (!netif_running(sdata
->dev
))
2133 if (sdata
->vif
.type
== NL80211_IFTYPE_MONITOR
)
2136 rx
.flags
|= IEEE80211_RX_RA_MATCH
;
2137 prepares
= prepare_for_handlers(sdata
, &rx
, hdr
);
2143 * frame is destined for this interface, but if it's not
2144 * also for the previous one we handle that after the
2145 * loop to avoid copying the SKB once too much
2154 * frame was destined for the previous interface
2155 * so invoke RX handlers for it
2158 skb_new
= skb_copy(skb
, GFP_ATOMIC
);
2160 if (net_ratelimit())
2161 printk(KERN_DEBUG
"%s: failed to copy "
2162 "multicast frame for %s\n",
2163 wiphy_name(local
->hw
.wiphy
),
2167 ieee80211_invoke_rx_handlers(prev
, &rx
, skb_new
);
2171 ieee80211_invoke_rx_handlers(prev
, &rx
, skb
);
2176 #define SEQ_MODULO 0x1000
2177 #define SEQ_MASK 0xfff
2179 static inline int seq_less(u16 sq1
, u16 sq2
)
2181 return ((sq1
- sq2
) & SEQ_MASK
) > (SEQ_MODULO
>> 1);
2184 static inline u16
seq_inc(u16 sq
)
2186 return (sq
+ 1) & SEQ_MASK
;
2189 static inline u16
seq_sub(u16 sq1
, u16 sq2
)
2191 return (sq1
- sq2
) & SEQ_MASK
;
2195 static void ieee80211_release_reorder_frame(struct ieee80211_hw
*hw
,
2196 struct tid_ampdu_rx
*tid_agg_rx
,
2199 struct ieee80211_supported_band
*sband
;
2200 struct ieee80211_rate
*rate
;
2201 struct sk_buff
*skb
= tid_agg_rx
->reorder_buf
[index
];
2202 struct ieee80211_rx_status
*status
;
2207 status
= IEEE80211_SKB_RXCB(skb
);
2209 /* release the reordered frames to stack */
2210 sband
= hw
->wiphy
->bands
[status
->band
];
2211 if (status
->flag
& RX_FLAG_HT
)
2212 rate
= sband
->bitrates
; /* TODO: HT rates */
2214 rate
= &sband
->bitrates
[status
->rate_idx
];
2215 __ieee80211_rx_handle_packet(hw
, skb
, rate
);
2216 tid_agg_rx
->stored_mpdu_num
--;
2217 tid_agg_rx
->reorder_buf
[index
] = NULL
;
2220 tid_agg_rx
->head_seq_num
= seq_inc(tid_agg_rx
->head_seq_num
);
2225 * Timeout (in jiffies) for skb's that are waiting in the RX reorder buffer. If
2226 * the skb was added to the buffer longer than this time ago, the earlier
2227 * frames that have not yet been received are assumed to be lost and the skb
2228 * can be released for processing. This may also release other skb's from the
2229 * reorder buffer if there are no additional gaps between the frames.
2231 #define HT_RX_REORDER_BUF_TIMEOUT (HZ / 10)
2234 * As it function blongs to Rx path it must be called with
2235 * the proper rcu_read_lock protection for its flow.
2237 static u8
ieee80211_sta_manage_reorder_buf(struct ieee80211_hw
*hw
,
2238 struct tid_ampdu_rx
*tid_agg_rx
,
2239 struct sk_buff
*skb
,
2243 u16 head_seq_num
, buf_size
;
2246 buf_size
= tid_agg_rx
->buf_size
;
2247 head_seq_num
= tid_agg_rx
->head_seq_num
;
2249 /* frame with out of date sequence number */
2250 if (seq_less(mpdu_seq_num
, head_seq_num
)) {
2255 /* if frame sequence number exceeds our buffering window size or
2256 * block Ack Request arrived - release stored frames */
2257 if ((!seq_less(mpdu_seq_num
, head_seq_num
+ buf_size
)) || (bar_req
)) {
2258 /* new head to the ordering buffer */
2260 head_seq_num
= mpdu_seq_num
;
2263 seq_inc(seq_sub(mpdu_seq_num
, buf_size
));
2264 /* release stored frames up to new head to stack */
2265 while (seq_less(tid_agg_rx
->head_seq_num
, head_seq_num
)) {
2266 index
= seq_sub(tid_agg_rx
->head_seq_num
,
2268 % tid_agg_rx
->buf_size
;
2269 ieee80211_release_reorder_frame(hw
, tid_agg_rx
,
2276 /* now the new frame is always in the range of the reordering */
2278 index
= seq_sub(mpdu_seq_num
, tid_agg_rx
->ssn
)
2279 % tid_agg_rx
->buf_size
;
2280 /* check if we already stored this frame */
2281 if (tid_agg_rx
->reorder_buf
[index
]) {
2286 /* if arrived mpdu is in the right order and nothing else stored */
2287 /* release it immediately */
2288 if (mpdu_seq_num
== tid_agg_rx
->head_seq_num
&&
2289 tid_agg_rx
->stored_mpdu_num
== 0) {
2290 tid_agg_rx
->head_seq_num
=
2291 seq_inc(tid_agg_rx
->head_seq_num
);
2295 /* put the frame in the reordering buffer */
2296 tid_agg_rx
->reorder_buf
[index
] = skb
;
2297 tid_agg_rx
->reorder_time
[index
] = jiffies
;
2298 tid_agg_rx
->stored_mpdu_num
++;
2299 /* release the buffer until next missing frame */
2300 index
= seq_sub(tid_agg_rx
->head_seq_num
, tid_agg_rx
->ssn
)
2301 % tid_agg_rx
->buf_size
;
2302 if (!tid_agg_rx
->reorder_buf
[index
] &&
2303 tid_agg_rx
->stored_mpdu_num
> 1) {
2305 * No buffers ready to be released, but check whether any
2306 * frames in the reorder buffer have timed out.
2310 for (j
= (index
+ 1) % tid_agg_rx
->buf_size
; j
!= index
;
2311 j
= (j
+ 1) % tid_agg_rx
->buf_size
) {
2312 if (tid_agg_rx
->reorder_buf
[j
] == NULL
) {
2316 if (!time_after(jiffies
, tid_agg_rx
->reorder_time
[j
] +
2320 #ifdef CONFIG_MAC80211_HT_DEBUG
2321 if (net_ratelimit())
2322 printk(KERN_DEBUG
"%s: release an RX reorder "
2323 "frame due to timeout on earlier "
2325 wiphy_name(hw
->wiphy
));
2327 ieee80211_release_reorder_frame(hw
, tid_agg_rx
, j
);
2330 * Increment the head seq# also for the skipped slots.
2332 tid_agg_rx
->head_seq_num
=
2333 (tid_agg_rx
->head_seq_num
+ skipped
) &
2337 } else while (tid_agg_rx
->reorder_buf
[index
]) {
2338 ieee80211_release_reorder_frame(hw
, tid_agg_rx
, index
);
2339 index
= seq_sub(tid_agg_rx
->head_seq_num
,
2340 tid_agg_rx
->ssn
) % tid_agg_rx
->buf_size
;
2345 static u8
ieee80211_rx_reorder_ampdu(struct ieee80211_local
*local
,
2346 struct sk_buff
*skb
)
2348 struct ieee80211_hw
*hw
= &local
->hw
;
2349 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*) skb
->data
;
2350 struct sta_info
*sta
;
2351 struct tid_ampdu_rx
*tid_agg_rx
;
2357 sta
= sta_info_get(local
, hdr
->addr2
);
2361 /* filter the QoS data rx stream according to
2362 * STA/TID and check if this STA/TID is on aggregation */
2363 if (!ieee80211_is_data_qos(hdr
->frame_control
))
2366 tid
= *ieee80211_get_qos_ctl(hdr
) & IEEE80211_QOS_CTL_TID_MASK
;
2368 if (sta
->ampdu_mlme
.tid_state_rx
[tid
] != HT_AGG_STATE_OPERATIONAL
)
2371 tid_agg_rx
= sta
->ampdu_mlme
.tid_rx
[tid
];
2373 /* qos null data frames are excluded */
2374 if (unlikely(hdr
->frame_control
& cpu_to_le16(IEEE80211_STYPE_NULLFUNC
)))
2377 /* new un-ordered ampdu frame - process it */
2379 /* reset session timer */
2380 if (tid_agg_rx
->timeout
)
2381 mod_timer(&tid_agg_rx
->session_timer
,
2382 TU_TO_EXP_TIME(tid_agg_rx
->timeout
));
2384 /* if this mpdu is fragmented - terminate rx aggregation session */
2385 sc
= le16_to_cpu(hdr
->seq_ctrl
);
2386 if (sc
& IEEE80211_SCTL_FRAG
) {
2387 ieee80211_sta_stop_rx_ba_session(sta
->sdata
, sta
->sta
.addr
,
2388 tid
, 0, WLAN_REASON_QSTA_REQUIRE_SETUP
);
2393 /* according to mpdu sequence number deal with reordering buffer */
2394 mpdu_seq_num
= (sc
& IEEE80211_SCTL_SEQ
) >> 4;
2395 ret
= ieee80211_sta_manage_reorder_buf(hw
, tid_agg_rx
, skb
,
2402 * This is the receive path handler. It is called by a low level driver when an
2403 * 802.11 MPDU is received from the hardware.
2405 void __ieee80211_rx(struct ieee80211_hw
*hw
, struct sk_buff
*skb
)
2407 struct ieee80211_local
*local
= hw_to_local(hw
);
2408 struct ieee80211_rate
*rate
= NULL
;
2409 struct ieee80211_supported_band
*sband
;
2410 struct ieee80211_rx_status
*status
= IEEE80211_SKB_RXCB(skb
);
2412 if (status
->band
< 0 ||
2413 status
->band
>= IEEE80211_NUM_BANDS
) {
2418 sband
= local
->hw
.wiphy
->bands
[status
->band
];
2424 if (status
->flag
& RX_FLAG_HT
) {
2425 /* rate_idx is MCS index */
2426 if (WARN_ON(status
->rate_idx
< 0 ||
2427 status
->rate_idx
>= 76))
2429 /* HT rates are not in the table - use the highest legacy rate
2430 * for now since other parts of mac80211 may not yet be fully
2432 rate
= &sband
->bitrates
[sband
->n_bitrates
- 1];
2434 if (WARN_ON(status
->rate_idx
< 0 ||
2435 status
->rate_idx
>= sband
->n_bitrates
))
2437 rate
= &sband
->bitrates
[status
->rate_idx
];
2441 * key references and virtual interfaces are protected using RCU
2442 * and this requires that we are in a read-side RCU section during
2443 * receive processing
2448 * Frames with failed FCS/PLCP checksum are not returned,
2449 * all other frames are returned without radiotap header
2450 * if it was previously present.
2451 * Also, frames with less than 16 bytes are dropped.
2453 skb
= ieee80211_rx_monitor(local
, skb
, rate
);
2460 * In theory, the block ack reordering should happen after duplicate
2461 * removal (ieee80211_rx_h_check(), which is an RX handler). As such,
2462 * the call to ieee80211_rx_reorder_ampdu() should really be moved to
2463 * happen as a new RX handler between ieee80211_rx_h_check and
2464 * ieee80211_rx_h_decrypt. This cleanup may eventually happen, but for
2465 * the time being, the call can be here since RX reorder buf processing
2466 * will implicitly skip duplicates. We could, in theory at least,
2467 * process frames that ieee80211_rx_h_passive_scan would drop (e.g.,
2468 * frames from other than operational channel), but that should not
2469 * happen in normal networks.
2471 if (!ieee80211_rx_reorder_ampdu(local
, skb
))
2472 __ieee80211_rx_handle_packet(hw
, skb
, rate
);
2476 EXPORT_SYMBOL(__ieee80211_rx
);
2478 /* This is a version of the rx handler that can be called from hard irq
2479 * context. Post the skb on the queue and schedule the tasklet */
2480 void ieee80211_rx_irqsafe(struct ieee80211_hw
*hw
, struct sk_buff
*skb
)
2482 struct ieee80211_local
*local
= hw_to_local(hw
);
2484 BUILD_BUG_ON(sizeof(struct ieee80211_rx_status
) > sizeof(skb
->cb
));
2486 skb
->dev
= local
->mdev
;
2487 skb
->pkt_type
= IEEE80211_RX_MSG
;
2488 skb_queue_tail(&local
->skb_queue
, skb
);
2489 tasklet_schedule(&local
->tasklet
);
2491 EXPORT_SYMBOL(ieee80211_rx_irqsafe
);