treewide: Add SPDX license identifier - Makefile/Kconfig

[mirror_ubuntu-jammy-kernel.git] / net / sched / Kconfig

# SPDX-License-Identifier: GPL-2.0-only
#
# Traffic control configuration.
#

menuconfig NET_SCHED
        bool "QoS and/or fair queueing"
        select NET_SCH_FIFO
        ---help---
          When the kernel has several packets to send out over a network
          device, it has to decide which ones to send first, which ones to
          delay, and which ones to drop. This is the job of the queueing
          disciplines, several different algorithms for how to do this
          "fairly" have been proposed.

          If you say N here, you will get the standard packet scheduler, which
          is a FIFO (first come, first served). If you say Y here, you will be
          able to choose from among several alternative algorithms which can
          then be attached to different network devices. This is useful for
          example if some of your network devices are real time devices that
          need a certain minimum data flow rate, or if you need to limit the
          maximum data flow rate for traffic which matches specified criteria.
          This code is considered to be experimental.

          To administer these schedulers, you'll need the user-level utilities
          from the package iproute2+tc at
          <https://www.kernel.org/pub/linux/utils/net/iproute2/>.  That package
          also contains some documentation; for more, check out
          <http://www.linuxfoundation.org/collaborate/workgroups/networking/iproute2>.

          This Quality of Service (QoS) support will enable you to use
          Differentiated Services (diffserv) and Resource Reservation Protocol
          (RSVP) on your Linux router if you also say Y to the corresponding
          classifiers below.  Documentation and software is at
          <http://diffserv.sourceforge.net/>.

          If you say Y here and to "/proc file system" below, you will be able
          to read status information about packet schedulers from the file
          /proc/net/psched.

          The available schedulers are listed in the following questions; you
          can say Y to as many as you like. If unsure, say N now.

if NET_SCHED

comment "Queueing/Scheduling"

config NET_SCH_CBQ
        tristate "Class Based Queueing (CBQ)"
        ---help---
          Say Y here if you want to use the Class-Based Queueing (CBQ) packet
          scheduling algorithm. This algorithm classifies the waiting packets
          into a tree-like hierarchy of classes; the leaves of this tree are
          in turn scheduled by separate algorithms.

          See the top of <file:net/sched/sch_cbq.c> for more details.

          CBQ is a commonly used scheduler, so if you're unsure, you should
          say Y here. Then say Y to all the queueing algorithms below that you
          want to use as leaf disciplines.

          To compile this code as a module, choose M here: the
          module will be called sch_cbq.

config NET_SCH_HTB
        tristate "Hierarchical Token Bucket (HTB)"
        ---help---
          Say Y here if you want to use the Hierarchical Token Buckets (HTB)
          packet scheduling algorithm. See
          <http://luxik.cdi.cz/~devik/qos/htb/> for complete manual and
          in-depth articles.

          HTB is very similar to CBQ regarding its goals however is has
          different properties and different algorithm.

          To compile this code as a module, choose M here: the
          module will be called sch_htb.

config NET_SCH_HFSC
        tristate "Hierarchical Fair Service Curve (HFSC)"
        ---help---
          Say Y here if you want to use the Hierarchical Fair Service Curve
          (HFSC) packet scheduling algorithm.

          To compile this code as a module, choose M here: the
          module will be called sch_hfsc.

config NET_SCH_ATM
        tristate "ATM Virtual Circuits (ATM)"
        depends on ATM
        ---help---
          Say Y here if you want to use the ATM pseudo-scheduler.  This
          provides a framework for invoking classifiers, which in turn
          select classes of this queuing discipline.  Each class maps
          the flow(s) it is handling to a given virtual circuit.

          See the top of <file:net/sched/sch_atm.c> for more details.

          To compile this code as a module, choose M here: the
          module will be called sch_atm.

config NET_SCH_PRIO
        tristate "Multi Band Priority Queueing (PRIO)"
        ---help---
          Say Y here if you want to use an n-band priority queue packet
          scheduler.

          To compile this code as a module, choose M here: the
          module will be called sch_prio.

config NET_SCH_MULTIQ
        tristate "Hardware Multiqueue-aware Multi Band Queuing (MULTIQ)"
        ---help---
          Say Y here if you want to use an n-band queue packet scheduler
          to support devices that have multiple hardware transmit queues.

          To compile this code as a module, choose M here: the
          module will be called sch_multiq.

config NET_SCH_RED
        tristate "Random Early Detection (RED)"
        ---help---
          Say Y here if you want to use the Random Early Detection (RED)
          packet scheduling algorithm.

          See the top of <file:net/sched/sch_red.c> for more details.

          To compile this code as a module, choose M here: the
          module will be called sch_red.

config NET_SCH_SFB
        tristate "Stochastic Fair Blue (SFB)"
        ---help---
          Say Y here if you want to use the Stochastic Fair Blue (SFB)
          packet scheduling algorithm.

          See the top of <file:net/sched/sch_sfb.c> for more details.

          To compile this code as a module, choose M here: the
          module will be called sch_sfb.

config NET_SCH_SFQ
        tristate "Stochastic Fairness Queueing (SFQ)"
        ---help---
          Say Y here if you want to use the Stochastic Fairness Queueing (SFQ)
          packet scheduling algorithm.

          See the top of <file:net/sched/sch_sfq.c> for more details.

          To compile this code as a module, choose M here: the
          module will be called sch_sfq.

config NET_SCH_TEQL
        tristate "True Link Equalizer (TEQL)"
        ---help---
          Say Y here if you want to use the True Link Equalizer (TLE) packet
          scheduling algorithm. This queueing discipline allows the combination
          of several physical devices into one virtual device.

          See the top of <file:net/sched/sch_teql.c> for more details.

          To compile this code as a module, choose M here: the
          module will be called sch_teql.

config NET_SCH_TBF
        tristate "Token Bucket Filter (TBF)"
        ---help---
          Say Y here if you want to use the Token Bucket Filter (TBF) packet
          scheduling algorithm.

          See the top of <file:net/sched/sch_tbf.c> for more details.

          To compile this code as a module, choose M here: the
          module will be called sch_tbf.

config NET_SCH_CBS
        tristate "Credit Based Shaper (CBS)"
        ---help---
          Say Y here if you want to use the Credit Based Shaper (CBS) packet
          scheduling algorithm.

          See the top of <file:net/sched/sch_cbs.c> for more details.

          To compile this code as a module, choose M here: the
          module will be called sch_cbs.

config NET_SCH_ETF
        tristate "Earliest TxTime First (ETF)"
        help
          Say Y here if you want to use the Earliest TxTime First (ETF) packet
          scheduling algorithm.

          See the top of <file:net/sched/sch_etf.c> for more details.

          To compile this code as a module, choose M here: the
          module will be called sch_etf.

config NET_SCH_TAPRIO
        tristate "Time Aware Priority (taprio) Scheduler"
        help
          Say Y here if you want to use the Time Aware Priority (taprio) packet
          scheduling algorithm.

          See the top of <file:net/sched/sch_taprio.c> for more details.

          To compile this code as a module, choose M here: the
          module will be called sch_taprio.

config NET_SCH_GRED
        tristate "Generic Random Early Detection (GRED)"
        ---help---
          Say Y here if you want to use the Generic Random Early Detection
          (GRED) packet scheduling algorithm for some of your network devices
          (see the top of <file:net/sched/sch_red.c> for details and
          references about the algorithm).

          To compile this code as a module, choose M here: the
          module will be called sch_gred.

config NET_SCH_DSMARK
        tristate "Differentiated Services marker (DSMARK)"
        ---help---
          Say Y if you want to schedule packets according to the
          Differentiated Services architecture proposed in RFC 2475.
          Technical information on this method, with pointers to associated
          RFCs, is available at <http://www.gta.ufrj.br/diffserv/>.

          To compile this code as a module, choose M here: the
          module will be called sch_dsmark.

config NET_SCH_NETEM
        tristate "Network emulator (NETEM)"
        ---help---
          Say Y if you want to emulate network delay, loss, and packet
          re-ordering. This is often useful to simulate networks when
          testing applications or protocols.

          To compile this driver as a module, choose M here: the module
          will be called sch_netem.

          If unsure, say N.

config NET_SCH_DRR
        tristate "Deficit Round Robin scheduler (DRR)"
        help
          Say Y here if you want to use the Deficit Round Robin (DRR) packet
          scheduling algorithm.

          To compile this driver as a module, choose M here: the module
          will be called sch_drr.

          If unsure, say N.

config NET_SCH_MQPRIO
        tristate "Multi-queue priority scheduler (MQPRIO)"
        help
          Say Y here if you want to use the Multi-queue Priority scheduler.
          This scheduler allows QOS to be offloaded on NICs that have support
          for offloading QOS schedulers.

          To compile this driver as a module, choose M here: the module will
          be called sch_mqprio.

          If unsure, say N.

config NET_SCH_SKBPRIO
        tristate "SKB priority queue scheduler (SKBPRIO)"
        help
          Say Y here if you want to use the SKB priority queue
          scheduler. This schedules packets according to skb->priority,
          which is useful for request packets in DoS mitigation systems such
          as Gatekeeper.

          To compile this driver as a module, choose M here: the module will
          be called sch_skbprio.

          If unsure, say N.

config NET_SCH_CHOKE
        tristate "CHOose and Keep responsive flow scheduler (CHOKE)"
        help
          Say Y here if you want to use the CHOKe packet scheduler (CHOose
          and Keep for responsive flows, CHOose and Kill for unresponsive
          flows). This is a variation of RED which trys to penalize flows
          that monopolize the queue.

          To compile this code as a module, choose M here: the
          module will be called sch_choke.

config NET_SCH_QFQ
        tristate "Quick Fair Queueing scheduler (QFQ)"
        help
          Say Y here if you want to use the Quick Fair Queueing Scheduler (QFQ)
          packet scheduling algorithm.

          To compile this driver as a module, choose M here: the module
          will be called sch_qfq.

          If unsure, say N.

config NET_SCH_CODEL
        tristate "Controlled Delay AQM (CODEL)"
        help
          Say Y here if you want to use the Controlled Delay (CODEL)
          packet scheduling algorithm.

          To compile this driver as a module, choose M here: the module
          will be called sch_codel.

          If unsure, say N.

config NET_SCH_FQ_CODEL
        tristate "Fair Queue Controlled Delay AQM (FQ_CODEL)"
        help
          Say Y here if you want to use the FQ Controlled Delay (FQ_CODEL)
          packet scheduling algorithm.

          To compile this driver as a module, choose M here: the module
          will be called sch_fq_codel.

          If unsure, say N.

config NET_SCH_CAKE
        tristate "Common Applications Kept Enhanced (CAKE)"
        help
          Say Y here if you want to use the Common Applications Kept Enhanced
          (CAKE) queue management algorithm.

          To compile this driver as a module, choose M here: the module
          will be called sch_cake.

          If unsure, say N.

config NET_SCH_FQ
        tristate "Fair Queue"
        help
          Say Y here if you want to use the FQ packet scheduling algorithm.

          FQ does flow separation, and is able to respect pacing requirements
          set by TCP stack into sk->sk_pacing_rate (for localy generated
          traffic)

          To compile this driver as a module, choose M here: the module
          will be called sch_fq.

          If unsure, say N.

config NET_SCH_HHF
        tristate "Heavy-Hitter Filter (HHF)"
        help
          Say Y here if you want to use the Heavy-Hitter Filter (HHF)
          packet scheduling algorithm.

          To compile this driver as a module, choose M here: the module
          will be called sch_hhf.

config NET_SCH_PIE
        tristate "Proportional Integral controller Enhanced (PIE) scheduler"
        help
          Say Y here if you want to use the Proportional Integral controller
          Enhanced scheduler packet scheduling algorithm.
          For more information, please see https://tools.ietf.org/html/rfc8033

          To compile this driver as a module, choose M here: the module
          will be called sch_pie.

          If unsure, say N.

config NET_SCH_INGRESS
        tristate "Ingress/classifier-action Qdisc"
        depends on NET_CLS_ACT
        select NET_INGRESS
        select NET_EGRESS
        ---help---
          Say Y here if you want to use classifiers for incoming and/or outgoing
          packets. This qdisc doesn't do anything else besides running classifiers,
          which can also have actions attached to them. In case of outgoing packets,
          classifiers that this qdisc holds are executed in the transmit path
          before real enqueuing to an egress qdisc happens.

          If unsure, say Y.

          To compile this code as a module, choose M here: the module will be
          called sch_ingress with alias of sch_clsact.

config NET_SCH_PLUG
        tristate "Plug network traffic until release (PLUG)"
        ---help---

          This queuing discipline allows userspace to plug/unplug a network
          output queue, using the netlink interface.  When it receives an
          enqueue command it inserts a plug into the outbound queue that
          causes following packets to enqueue until a dequeue command arrives
          over netlink, causing the plug to be removed and resuming the normal
          packet flow.

          This module also provides a generic "network output buffering"
          functionality (aka output commit), wherein upon arrival of a dequeue
          command, only packets up to the first plug are released for delivery.
          The Remus HA project uses this module to enable speculative execution
          of virtual machines by allowing the generated network output to be rolled
          back if needed.

          For more information, please refer to <http://wiki.xenproject.org/wiki/Remus>

          Say Y here if you are using this kernel for Xen dom0 and
          want to protect Xen guests with Remus.

          To compile this code as a module, choose M here: the
          module will be called sch_plug.

menuconfig NET_SCH_DEFAULT
        bool "Allow override default queue discipline"
        ---help---
          Support for selection of default queuing discipline.

          Nearly all users can safely say no here, and the default
          of pfifo_fast will be used. Many distributions already set
          the default value via /proc/sys/net/core/default_qdisc.

          If unsure, say N.

if NET_SCH_DEFAULT

choice
        prompt "Default queuing discipline"
        default DEFAULT_PFIFO_FAST
        help
          Select the queueing discipline that will be used by default
          for all network devices.

        config DEFAULT_FQ
                bool "Fair Queue" if NET_SCH_FQ

        config DEFAULT_CODEL
                bool "Controlled Delay" if NET_SCH_CODEL

        config DEFAULT_FQ_CODEL
                bool "Fair Queue Controlled Delay" if NET_SCH_FQ_CODEL

        config DEFAULT_SFQ
                bool "Stochastic Fair Queue" if NET_SCH_SFQ

        config DEFAULT_PFIFO_FAST
                bool "Priority FIFO Fast"
endchoice

config DEFAULT_NET_SCH
        string
        default "pfifo_fast" if DEFAULT_PFIFO_FAST
        default "fq" if DEFAULT_FQ
        default "fq_codel" if DEFAULT_FQ_CODEL
        default "sfq" if DEFAULT_SFQ
        default "pfifo_fast"
endif

comment "Classification"

config NET_CLS
        bool

config NET_CLS_BASIC
        tristate "Elementary classification (BASIC)"
        select NET_CLS
        ---help---
          Say Y here if you want to be able to classify packets using
          only extended matches and actions.

          To compile this code as a module, choose M here: the
          module will be called cls_basic.

config NET_CLS_TCINDEX
        tristate "Traffic-Control Index (TCINDEX)"
        select NET_CLS
        ---help---
          Say Y here if you want to be able to classify packets based on
          traffic control indices. You will want this feature if you want
          to implement Differentiated Services together with DSMARK.

          To compile this code as a module, choose M here: the
          module will be called cls_tcindex.

config NET_CLS_ROUTE4
        tristate "Routing decision (ROUTE)"
        depends on INET
        select IP_ROUTE_CLASSID
        select NET_CLS
        ---help---
          If you say Y here, you will be able to classify packets
          according to the route table entry they matched.

          To compile this code as a module, choose M here: the
          module will be called cls_route.

config NET_CLS_FW
        tristate "Netfilter mark (FW)"
        select NET_CLS
        ---help---
          If you say Y here, you will be able to classify packets
          according to netfilter/firewall marks.

          To compile this code as a module, choose M here: the
          module will be called cls_fw.

config NET_CLS_U32
        tristate "Universal 32bit comparisons w/ hashing (U32)"
        select NET_CLS
        ---help---
          Say Y here to be able to classify packets using a universal
          32bit pieces based comparison scheme.

          To compile this code as a module, choose M here: the
          module will be called cls_u32.

config CLS_U32_PERF
        bool "Performance counters support"
        depends on NET_CLS_U32
        ---help---
          Say Y here to make u32 gather additional statistics useful for
          fine tuning u32 classifiers.

config CLS_U32_MARK
        bool "Netfilter marks support"
        depends on NET_CLS_U32
        ---help---
          Say Y here to be able to use netfilter marks as u32 key.

config NET_CLS_RSVP
        tristate "IPv4 Resource Reservation Protocol (RSVP)"
        select NET_CLS
        ---help---
          The Resource Reservation Protocol (RSVP) permits end systems to
          request a minimum and maximum data flow rate for a connection; this
          is important for real time data such as streaming sound or video.

          Say Y here if you want to be able to classify outgoing packets based
          on their RSVP requests.

          To compile this code as a module, choose M here: the
          module will be called cls_rsvp.

config NET_CLS_RSVP6
        tristate "IPv6 Resource Reservation Protocol (RSVP6)"
        select NET_CLS
        ---help---
          The Resource Reservation Protocol (RSVP) permits end systems to
          request a minimum and maximum data flow rate for a connection; this
          is important for real time data such as streaming sound or video.

          Say Y here if you want to be able to classify outgoing packets based
          on their RSVP requests and you are using the IPv6 protocol.

          To compile this code as a module, choose M here: the
          module will be called cls_rsvp6.

config NET_CLS_FLOW
        tristate "Flow classifier"
        select NET_CLS
        ---help---
          If you say Y here, you will be able to classify packets based on
          a configurable combination of packet keys. This is mostly useful
          in combination with SFQ.

          To compile this code as a module, choose M here: the
          module will be called cls_flow.

config NET_CLS_CGROUP
        tristate "Control Group Classifier"
        select NET_CLS
        select CGROUP_NET_CLASSID
        depends on CGROUPS
        ---help---
          Say Y here if you want to classify packets based on the control
          cgroup of their process.

          To compile this code as a module, choose M here: the
          module will be called cls_cgroup.

config NET_CLS_BPF
        tristate "BPF-based classifier"
        select NET_CLS
        ---help---
          If you say Y here, you will be able to classify packets based on
          programmable BPF (JIT'ed) filters as an alternative to ematches.

          To compile this code as a module, choose M here: the module will
          be called cls_bpf.

config NET_CLS_FLOWER
        tristate "Flower classifier"
        select NET_CLS
        ---help---
          If you say Y here, you will be able to classify packets based on
          a configurable combination of packet keys and masks.

          To compile this code as a module, choose M here: the module will
          be called cls_flower.

config NET_CLS_MATCHALL
        tristate "Match-all classifier"
        select NET_CLS
        ---help---
          If you say Y here, you will be able to classify packets based on
          nothing. Every packet will match.

          To compile this code as a module, choose M here: the module will
          be called cls_matchall.

config NET_EMATCH
        bool "Extended Matches"
        select NET_CLS
        ---help---
          Say Y here if you want to use extended matches on top of classifiers
          and select the extended matches below.

          Extended matches are small classification helpers not worth writing
          a separate classifier for.

          A recent version of the iproute2 package is required to use
          extended matches.

config NET_EMATCH_STACK
        int "Stack size"
        depends on NET_EMATCH
        default "32"
        ---help---
          Size of the local stack variable used while evaluating the tree of
          ematches. Limits the depth of the tree, i.e. the number of
          encapsulated precedences. Every level requires 4 bytes of additional
          stack space.

config NET_EMATCH_CMP
        tristate "Simple packet data comparison"
        depends on NET_EMATCH
        ---help---
          Say Y here if you want to be able to classify packets based on
          simple packet data comparisons for 8, 16, and 32bit values.

          To compile this code as a module, choose M here: the
          module will be called em_cmp.

config NET_EMATCH_NBYTE
        tristate "Multi byte comparison"
        depends on NET_EMATCH
        ---help---
          Say Y here if you want to be able to classify packets based on
          multiple byte comparisons mainly useful for IPv6 address comparisons.

          To compile this code as a module, choose M here: the
          module will be called em_nbyte.

config NET_EMATCH_U32
        tristate "U32 key"
        depends on NET_EMATCH
        ---help---
          Say Y here if you want to be able to classify packets using
          the famous u32 key in combination with logic relations.

          To compile this code as a module, choose M here: the
          module will be called em_u32.

config NET_EMATCH_META
        tristate "Metadata"
        depends on NET_EMATCH
        ---help---
          Say Y here if you want to be able to classify packets based on
          metadata such as load average, netfilter attributes, socket
          attributes and routing decisions.

          To compile this code as a module, choose M here: the
          module will be called em_meta.

config NET_EMATCH_TEXT
        tristate "Textsearch"
        depends on NET_EMATCH
        select TEXTSEARCH
        select TEXTSEARCH_KMP
        select TEXTSEARCH_BM
        select TEXTSEARCH_FSM
        ---help---
          Say Y here if you want to be able to classify packets based on
          textsearch comparisons.

          To compile this code as a module, choose M here: the
          module will be called em_text.

config NET_EMATCH_CANID
        tristate "CAN Identifier"
        depends on NET_EMATCH && (CAN=y || CAN=m)
        ---help---
          Say Y here if you want to be able to classify CAN frames based
          on CAN Identifier.

          To compile this code as a module, choose M here: the
          module will be called em_canid.

config NET_EMATCH_IPSET
        tristate "IPset"
        depends on NET_EMATCH && IP_SET
        ---help---
          Say Y here if you want to be able to classify packets based on
          ipset membership.

          To compile this code as a module, choose M here: the
          module will be called em_ipset.

config NET_EMATCH_IPT
        tristate "IPtables Matches"
        depends on NET_EMATCH && NETFILTER && NETFILTER_XTABLES
        ---help---
          Say Y here to be able to classify packets based on iptables
          matches.
          Current supported match is "policy" which allows packet classification
          based on IPsec policy that was used during decapsulation

          To compile this code as a module, choose M here: the
          module will be called em_ipt.

config NET_CLS_ACT
        bool "Actions"
        select NET_CLS
        ---help---
          Say Y here if you want to use traffic control actions. Actions
          get attached to classifiers and are invoked after a successful
          classification. They are used to overwrite the classification
          result, instantly drop or redirect packets, etc.

          A recent version of the iproute2 package is required to use
          extended matches.

config NET_ACT_POLICE
        tristate "Traffic Policing"
        depends on NET_CLS_ACT
        ---help---
          Say Y here if you want to do traffic policing, i.e. strict
          bandwidth limiting. This action replaces the existing policing
          module.

          To compile this code as a module, choose M here: the
          module will be called act_police.

config NET_ACT_GACT
        tristate "Generic actions"
        depends on NET_CLS_ACT
        ---help---
          Say Y here to take generic actions such as dropping and
          accepting packets.

          To compile this code as a module, choose M here: the
          module will be called act_gact.

config GACT_PROB
        bool "Probability support"
        depends on NET_ACT_GACT
        ---help---
          Say Y here to use the generic action randomly or deterministically.

config NET_ACT_MIRRED
        tristate "Redirecting and Mirroring"
        depends on NET_CLS_ACT
        ---help---
          Say Y here to allow packets to be mirrored or redirected to
          other devices.

          To compile this code as a module, choose M here: the
          module will be called act_mirred.

config NET_ACT_SAMPLE
        tristate "Traffic Sampling"
        depends on NET_CLS_ACT
        select PSAMPLE
        ---help---
          Say Y here to allow packet sampling tc action. The packet sample
          action consists of statistically choosing packets and sampling
          them using the psample module.

          To compile this code as a module, choose M here: the
          module will be called act_sample.

config NET_ACT_IPT
        tristate "IPtables targets"
        depends on NET_CLS_ACT && NETFILTER && IP_NF_IPTABLES
        ---help---
          Say Y here to be able to invoke iptables targets after successful
          classification.

          To compile this code as a module, choose M here: the
          module will be called act_ipt.

config NET_ACT_NAT
        tristate "Stateless NAT"
        depends on NET_CLS_ACT
        ---help---
          Say Y here to do stateless NAT on IPv4 packets.  You should use
          netfilter for NAT unless you know what you are doing.

          To compile this code as a module, choose M here: the
          module will be called act_nat.

config NET_ACT_PEDIT
        tristate "Packet Editing"
        depends on NET_CLS_ACT
        ---help---
          Say Y here if you want to mangle the content of packets.

          To compile this code as a module, choose M here: the
          module will be called act_pedit.

config NET_ACT_SIMP
        tristate "Simple Example (Debug)"
        depends on NET_CLS_ACT
        ---help---
          Say Y here to add a simple action for demonstration purposes.
          It is meant as an example and for debugging purposes. It will
          print a configured policy string followed by the packet count
          to the console for every packet that passes by.

          If unsure, say N.

          To compile this code as a module, choose M here: the
          module will be called act_simple.

config NET_ACT_SKBEDIT
        tristate "SKB Editing"
        depends on NET_CLS_ACT
        ---help---
          Say Y here to change skb priority or queue_mapping settings.

          If unsure, say N.

          To compile this code as a module, choose M here: the
          module will be called act_skbedit.

config NET_ACT_CSUM
        tristate "Checksum Updating"
        depends on NET_CLS_ACT && INET
        select LIBCRC32C
        ---help---
          Say Y here to update some common checksum after some direct
          packet alterations.

          To compile this code as a module, choose M here: the
          module will be called act_csum.

config NET_ACT_VLAN
        tristate "Vlan manipulation"
        depends on NET_CLS_ACT
        ---help---
          Say Y here to push or pop vlan headers.

          If unsure, say N.

          To compile this code as a module, choose M here: the
          module will be called act_vlan.

config NET_ACT_BPF
        tristate "BPF based action"
        depends on NET_CLS_ACT
        ---help---
          Say Y here to execute BPF code on packets. The BPF code will decide
          if the packet should be dropped or not.

          If unsure, say N.

          To compile this code as a module, choose M here: the
          module will be called act_bpf.

config NET_ACT_CONNMARK
        tristate "Netfilter Connection Mark Retriever"
        depends on NET_CLS_ACT && NETFILTER && IP_NF_IPTABLES
        depends on NF_CONNTRACK && NF_CONNTRACK_MARK
        ---help---
          Say Y here to allow retrieving of conn mark

          If unsure, say N.

          To compile this code as a module, choose M here: the
          module will be called act_connmark.

config NET_ACT_SKBMOD
        tristate "skb data modification action"
        depends on NET_CLS_ACT
        ---help---
         Say Y here to allow modification of skb data

         If unsure, say N.

         To compile this code as a module, choose M here: the
         module will be called act_skbmod.

config NET_ACT_IFE
        tristate "Inter-FE action based on IETF ForCES InterFE LFB"
        depends on NET_CLS_ACT
        select NET_IFE
        ---help---
          Say Y here to allow for sourcing and terminating metadata
          For details refer to netdev01 paper:
          "Distributing Linux Traffic Control Classifier-Action Subsystem"
           Authors: Jamal Hadi Salim and Damascene M. Joachimpillai

          To compile this code as a module, choose M here: the
          module will be called act_ife.

config NET_ACT_TUNNEL_KEY
        tristate "IP tunnel metadata manipulation"
        depends on NET_CLS_ACT
        ---help---
          Say Y here to set/release ip tunnel metadata.

          If unsure, say N.

          To compile this code as a module, choose M here: the
          module will be called act_tunnel_key.

config NET_IFE_SKBMARK
        tristate "Support to encoding decoding skb mark on IFE action"
        depends on NET_ACT_IFE

config NET_IFE_SKBPRIO
        tristate "Support to encoding decoding skb prio on IFE action"
        depends on NET_ACT_IFE

config NET_IFE_SKBTCINDEX
        tristate "Support to encoding decoding skb tcindex on IFE action"
        depends on NET_ACT_IFE

config NET_CLS_IND
        bool "Incoming device classification"
        depends on NET_CLS_U32 || NET_CLS_FW
        ---help---
          Say Y here to extend the u32 and fw classifier to support
          classification based on the incoming device. This option is
          likely to disappear in favour of the metadata ematch.

endif # NET_SCHED

config NET_SCH_FIFO
        bool