net/wireless/Kconfig

   1 config WIRELESS_EXT
   2         bool
   3
   4 config WEXT_CORE
   5         def_bool y
   6         depends on CFG80211_WEXT || WIRELESS_EXT
   7
   8 config WEXT_PROC
   9         def_bool y
  10         depends on PROC_FS
  11         depends on WEXT_CORE
  12
  13 config WEXT_SPY
  14         bool
  15
  16 config WEXT_PRIV
  17         bool
  18
  19 config CFG80211
  20         tristate "cfg80211 - wireless configuration API"
  21         depends on RFKILL || !RFKILL
  22         ---help---
  23           cfg80211 is the Linux wireless LAN (802.11) configuration API.
  24           Enable this if you have a wireless device.
  25
  26           For more information refer to documentation on the wireless wiki:
  27
  28           http://wireless.kernel.org/en/developers/Documentation/cfg80211
  29
  30           When built as a module it will be called cfg80211.
  31
  32 config NL80211_TESTMODE
  33         bool "nl80211 testmode command"
  34         depends on CFG80211
  35         help
  36           The nl80211 testmode command helps implementing things like
  37           factory calibration or validation tools for wireless chips.
  38
  39           Select this option ONLY for kernels that are specifically
  40           built for such purposes.
  41
  42           Debugging tools that are supposed to end up in the hands of
  43           users should better be implemented with debugfs.
  44
  45           Say N.
  46
  47 config CFG80211_DEVELOPER_WARNINGS
  48         bool "enable developer warnings"
  49         depends on CFG80211
  50         default n
  51         help
  52           This option enables some additional warnings that help
  53           cfg80211 developers and driver developers, but beware that
  54           they can also trigger due to races with userspace.
  55
  56           For example, when a driver reports that it was disconnected
  57           from the AP, but the user disconnects manually at the same
  58           time, the warning might trigger spuriously due to races.
  59
  60           Say Y only if you are developing cfg80211 or a driver based
  61           on it (or mac80211).
  62
  63
  64 config CFG80211_CERTIFICATION_ONUS
  65         bool "cfg80211 certification onus"
  66         depends on CFG80211 && EXPERT
  67         default n
  68         ---help---
  69           You should disable this option unless you are both capable
  70           and willing to ensure your system will remain regulatory
  71           compliant with the features available under this option.
  72           Some options may still be under heavy development and
  73           for whatever reason regulatory compliance has not or
  74           cannot yet be verified. Regulatory verification may at
  75           times only be possible until you have the final system
  76           in place.
  77
  78           This option should only be enabled by system integrators
  79           or distributions that have done work necessary to ensure
  80           regulatory certification on the system with the enabled
  81           features. Alternatively you can enable this option if
  82           you are a wireless researcher and are working in a controlled
  83           and approved environment by your local regulatory agency.
  84
  85 config CFG80211_REG_CELLULAR_HINTS
  86         bool "cfg80211 regulatory support for cellular base station hints"
  87         depends on CFG80211_CERTIFICATION_ONUS
  88         ---help---
  89           This option enables support for parsing regulatory hints
  90           from cellular base stations. If enabled and at least one driver
  91           claims support for parsing cellular base station hints the
  92           regulatory core will allow and parse these regulatory hints.
  93           The regulatory core will only apply these regulatory hints on
  94           drivers that support this feature. You should only enable this
  95           feature if you have tested and validated this feature on your
  96           systems.
  97
  98 config CFG80211_REG_RELAX_NO_IR
  99         bool "cfg80211 support for NO_IR relaxation"
 100         depends on CFG80211_CERTIFICATION_ONUS
 101         ---help---
 102          This option enables support for relaxation of the NO_IR flag for
 103          situations that certain regulatory bodies have provided clarifications
 104          on how relaxation can occur. This feature has an inherent dependency on
 105          userspace features which must have been properly tested and as such is
 106          not enabled by default.
 107
 108          A relaxation feature example is allowing the operation of a P2P group
 109          owner (GO) on channels marked with NO_IR if there is an additional BSS
 110          interface which associated to an AP which userspace assumes or confirms
 111          to be an authorized master, i.e., with radar detection support and DFS
 112          capabilities. However, note that in order to not create daisy chain
 113          scenarios, this relaxation is not allowed in cases where the BSS client
 114          is associated to P2P GO and in addition the P2P GO instantiated on
 115          a channel due to this relaxation should not allow connection from
 116          non P2P clients.
 117
 118          The regulatory core will apply these relaxations only for drivers that
 119          support this feature by declaring the appropriate channel flags and
 120          capabilities in their registration flow.
 121
 122 config CFG80211_DEFAULT_PS
 123         bool "enable powersave by default"
 124         depends on CFG80211
 125         default y
 126         help
 127           This option enables powersave mode by default.
 128
 129           If this causes your applications to misbehave you should fix your
 130           applications instead -- they need to register their network
 131           latency requirement, see Documentation/power/pm_qos_interface.txt.
 132
 133 config CFG80211_DEBUGFS
 134         bool "cfg80211 DebugFS entries"
 135         depends on CFG80211
 136         depends on DEBUG_FS
 137         ---help---
 138           You can enable this if you want debugfs entries for cfg80211.
 139
 140           If unsure, say N.
 141
 142 config CFG80211_INTERNAL_REGDB
 143         bool "use statically compiled regulatory rules database" if EXPERT
 144         default n
 145         depends on CFG80211
 146         ---help---
 147           This option generates an internal data structure representing
 148           the wireless regulatory rules described in net/wireless/db.txt
 149           and includes code to query that database. This is an alternative
 150           to using CRDA for defining regulatory rules for the kernel.
 151
 152           Using this option requires some parsing of the db.txt at build time,
 153           the parser will be upkept with the latest wireless-regdb updates but
 154           older wireless-regdb formats will be ignored. The parser may later
 155           be replaced to avoid issues with conflicts on versions of
 156           wireless-regdb.
 157
 158           For details see:
 159
 160           http://wireless.kernel.org/en/developers/Regulatory
 161
 162           Most distributions have a CRDA package. So if unsure, say N.
 163
 164 config CFG80211_CRDA_SUPPORT
 165         bool "support CRDA" if CFG80211_INTERNAL_REGDB
 166         default y
 167         depends on CFG80211
 168         help
 169           You should enable this option unless you know for sure you have no
 170           need for it, for example when using internal regdb (above.)
 171
 172           If unsure, say Y.
 173
 174 config CFG80211_WEXT
 175         bool "cfg80211 wireless extensions compatibility" if !CFG80211_WEXT_EXPORT
 176         depends on CFG80211
 177         select WEXT_CORE
 178         default y if CFG80211_WEXT_EXPORT
 179         help
 180           Enable this option if you need old userspace for wireless
 181           extensions with cfg80211-based drivers.
 182
 183 config CFG80211_WEXT_EXPORT
 184         bool
 185         depends on CFG80211
 186         help
 187           Drivers should select this option if they require cfg80211's
 188           wext compatibility symbols to be exported.
 189
 190 config LIB80211
 191         tristate
 192         default n
 193         help
 194           This options enables a library of common routines used
 195           by IEEE802.11 wireless LAN drivers.
 196
 197           Drivers should select this themselves if needed.
 198
 199 config LIB80211_CRYPT_WEP
 200         tristate
 201
 202 config LIB80211_CRYPT_CCMP
 203         tristate
 204
 205 config LIB80211_CRYPT_TKIP
 206         tristate
 207
 208 config LIB80211_DEBUG
 209         bool "lib80211 debugging messages"
 210         depends on LIB80211
 211         default n
 212         ---help---
 213           You can enable this if you want verbose debugging messages
 214           from lib80211.
 215
 216           If unsure, say N.