6 $ENV{DEBIAN_FRONTEND
} = 'noninteractive';
19 use String
::ShellQuote
;
24 use POSIX
":sys_wait_h";
26 use ProxmoxInstallerSetup
;
28 if (!$ENV{G_SLICE
} || $ENV{G_SLICE
} ne "always-malloc") {
29 die "do not use slice allocator (run with 'G_SLICE=always-malloc ./proxinstall ...')\n";
33 if (!GetOptions
('testmode=s' => \
$opt_testmode)) {
38 $ENV{'LVM_SUPPRESS_FD_WARNINGS'} = '1';
40 my ($setup, $cd_info) = ProxmoxInstallerSetup
::setup
();
42 my $zfstestpool = "test_rpool";
43 my $zfspoolname = $opt_testmode ?
$zfstestpool : 'rpool';
44 my $zfsrootvolname = "$setup->{product}-1";
46 my $storage_cfg_zfs = <<__EOD__;
49 content iso,vztmpl,backup
52 pool $zfspoolname/data
54 content images,rootdir
57 my $storage_cfg_btrfs = <<__EOD__;
60 content iso,vztmpl,backup
64 path /var/lib/pve/local-btrfs
65 content iso,vztmpl,backup,images,rootdir
68 my $storage_cfg_lvmthin = <<__EOD__;
71 content iso,vztmpl,backup
76 content rootdir,images
79 my $storage_cfg_local = <<__EOD__;
82 content iso,vztmpl,backup,rootdir,images
85 sub file_read_firstline
{
88 my $fh = IO
::File-
>new ($filename, "r");
96 my $logfd = IO
::File-
>new(">/tmp/install.log");
98 my $proxmox_libdir = $opt_testmode
99 ? Cwd
::cwd
() . "/testdir/var/lib/proxmox-installer"
100 : "/var/lib/proxmox-installer"
102 my $proxmox_cddir = $opt_testmode ?
"../pve-cd-builder/tmp/data-gz/" : "/cdrom";
103 my $proxmox_pkgdir = "${proxmox_cddir}/proxmox/packages/";
105 my $boot_type = -d
'/sys/firmware/efi' ?
'efi' : 'bios';
107 my $IPV4OCTET = "(?:25[0-5]|(?:2[0-4]|1[0-9]|[1-9])?[0-9])";
108 my $IPV4RE = "(?:(?:$IPV4OCTET\\.){3}$IPV4OCTET)";
109 my $IPV6H16 = "(?:[0-9a-fA-F]{1,4})";
110 my $IPV6LS32 = "(?:(?:$IPV4RE|$IPV6H16:$IPV6H16))";
113 "(?:(?:" . "(?:$IPV6H16:){6})$IPV6LS32)|" .
114 "(?:(?:" . "::(?:$IPV6H16:){5})$IPV6LS32)|" .
115 "(?:(?:(?:" . "$IPV6H16)?::(?:$IPV6H16:){4})$IPV6LS32)|" .
116 "(?:(?:(?:(?:$IPV6H16:){0,1}$IPV6H16)?::(?:$IPV6H16:){3})$IPV6LS32)|" .
117 "(?:(?:(?:(?:$IPV6H16:){0,2}$IPV6H16)?::(?:$IPV6H16:){2})$IPV6LS32)|" .
118 "(?:(?:(?:(?:$IPV6H16:){0,3}$IPV6H16)?::(?:$IPV6H16:){1})$IPV6LS32)|" .
119 "(?:(?:(?:(?:$IPV6H16:){0,4}$IPV6H16)?::" . ")$IPV6LS32)|" .
120 "(?:(?:(?:(?:$IPV6H16:){0,5}$IPV6H16)?::" . ")$IPV6H16)|" .
121 "(?:(?:(?:(?:$IPV6H16:){0,6}$IPV6H16)?::" . ")))";
123 my $IPRE = "(?:$IPV4RE|$IPV6RE)";
126 my $ipv4_mask_hash = {
143 '255.255.128.0' => 17,
144 '255.255.192.0' => 18,
145 '255.255.224.0' => 19,
146 '255.255.240.0' => 20,
147 '255.255.248.0' => 21,
148 '255.255.252.0' => 22,
149 '255.255.254.0' => 23,
150 '255.255.255.0' => 24,
151 '255.255.255.128' => 25,
152 '255.255.255.192' => 26,
153 '255.255.255.224' => 27,
154 '255.255.255.240' => 28,
155 '255.255.255.248' => 29,
156 '255.255.255.252' => 30,
157 '255.255.255.254' => 31,
158 '255.255.255.255' => 32
161 my $ipv4_reverse_mask = [
197 my $step_number = 0; # Init number for global function list
202 html
=> 'license.htm',
203 next_button
=> 'I a_gree',
204 function
=> \
&create_intro_view
,
209 function
=> \
&create_hdsel_view
,
213 html
=> 'country.htm',
214 function
=> \
&create_country_view
,
218 html
=> 'passwd.htm',
219 function
=> \
&create_password_view
,
223 html
=> 'ipconf.htm',
224 function
=> \
&create_ipconf_view
,
229 next_button
=> '_Install',
230 function
=> \
&create_ack_view
,
234 next_button
=> '_Reboot',
235 function
=> \
&create_extract_view
,
239 # GUI global variables
240 my ($window, $cmdbox, $inbox, $htmlview);
242 my ($next, $next_fctn, $target_hd);
243 my ($progress, $progress_status);
245 my ($ipversion, $ipaddress, $cidr, $ipconf_entry_addr);
246 my ($netmask, $ipconf_entry_mask);
247 my ($gateway, $ipconf_entry_gw);
248 my ($dnsserver, $ipconf_entry_dns);
249 my $hostname = 'proxmox';
250 my $domain = 'domain.tld';
251 my $cmdline = file_read_firstline
("/proc/cmdline");
254 my $timezone = 'Europe/Vienna';
255 my $keymap = 'en-us';
257 my $mailto = 'mail@example.invalid';
259 my $autoreboot_seconds = 5;
262 # TODO: add all the user-provided options for previous button
264 timezone
=> $timezone,
267 password
=> $password,
271 hostname
=> $hostname,
278 # parse command line args
280 my $config_options = {
284 if ($cmdline =~ m/\s(ext4|xfs)(\s.*)?$/) {
285 $config_options->{filesys
} = $1;
287 $config_options->{filesys
} = 'ext4';
290 if ($cmdline =~ m/hdsize=(\d+(\.\d+)?)[\s\n]/i) {
291 $config_options->{hdsize
} = $1;
294 if ($cmdline =~ m/swapsize=(\d+(\.\d+)?)[\s\n]/i) {
295 $config_options->{swapsize
} = $1;
298 if ($cmdline =~ m/maxroot=(\d+(\.\d+)?)[\s\n]/i) {
299 $config_options->{maxroot
} = $1;
302 if ($cmdline =~ m/minfree=(\d+(\.\d+)?)[\s\n]/i) {
303 $config_options->{minfree
} = $1;
306 if ($setup->{product
} eq 'pve') {
307 if ($cmdline =~ m/maxvz=(\d+(\.\d+)?)[\s\n]/i) {
308 $config_options->{maxvz
} = $1;
312 my $postfix_main_cf = <<_EOD;
313 # See /usr/share/postfix/main.cf.dist for a commented, more complete version
317 smtpd_banner = \$myhostname ESMTP \$mail_name (Debian/GNU)
320 # appending .domain is the MUA's job.
321 append_dot_mydomain = no
323 # Uncomment the next line to generate "delayed mail" warnings
324 #delay_warning_time = 4h
326 alias_maps = hash:/etc/aliases
327 alias_database = hash:/etc/aliases
328 mydestination = \$myhostname, localhost.\$mydomain, localhost
330 mynetworks = 127.0.0.0/8
331 inet_interfaces = loopback-only
332 recipient_delimiter = +
334 compatibility_level = 2
341 return String
::ShellQuote
::shell_quote
($str);
347 die "no arguments" if !$cmd;
349 return $cmd if !ref($cmd);
352 foreach my $arg (@$cmd) { push @qa, shellquote
($arg); }
354 return join (' ', @qa);
360 return run_command
($cmd, undef, undef, 1);
364 my ($cmd, $func, $input, $noout) = @_;
370 # see 'man bash' for option pipefail
371 $cmd = [ '/bin/bash', '-c', "set -o pipefail && $cmd" ];
376 $cmdstr = cmd2string
($cmd);
380 if ($input && ($cmdstr !~ m/chpasswd/)) {
381 $cmdtxt = "# $cmdstr <<EOD\n$input";
383 $cmdtxt .= "\nEOD\n";
385 $cmdtxt = "# $cmdstr\n";
393 print $logfd $cmdtxt;
395 my $reader = IO
::File-
>new();
396 my $writer = IO
::File-
>new();
397 my $error = IO
::File-
>new();
401 my $pid = eval { open3
($writer, $reader, $error, @$cmd) || die $!; };
405 if ($orig_pid != $$) {
412 print $writer $input if defined $input;
415 my $select = IO
::Select-
>new();
416 $select->add($reader);
417 $select->add($error);
419 my ($ostream, $logout) = ('', '', '');
421 while ($select->count) {
422 my @handles = $select->can_read (0.2);
424 Gtk3
::main_iteration
() while Gtk3
::events_pending
();
426 next if !scalar (@handles); # timeout
428 foreach my $h (@handles) {
430 my $count = sysread ($h, $buf, 4096);
431 if (!defined ($count)) {
435 die "command '$cmd' failed: $err";
437 $select->remove($h) if !$count;
439 $ostream .= $buf if !($noout || $func);
441 while ($logout =~ s/^([^\010\r\n]*)(\r|\n|(\010)+|\r\n)//s) {
443 &$func($line) if $func;
446 } elsif ($h eq $error) {
447 $ostream .= $buf if !($noout || $func);
455 &$func($logout) if $func;
457 my $rv = waitpid ($pid, 0);
459 return $? if $noout; # behave like standard system();
462 die "command '$cmdstr' failed to execute\n";
463 } elsif (my $sig = ($? & 127)) {
464 die "command '$cmdstr' failed - got signal $sig\n";
465 } elsif (my $exitcode = ($? >> 8)) {
466 die "command '$cmdstr' failed with exit code $exitcode";
472 # forks and runs the provided coderef in the child
473 # do not use syscmd or run_command as both confuse the GTK mainloop if
474 # run from a child process
475 sub run_in_background
{
478 my $pid = fork() // die "fork failed: $!\n";
482 warn "run_in_background error: $err\n";
491 print "trying to detect country...\n";
492 my $cpid = open2
(\
*TMP
, undef, "traceroute -N 1 -q 1 -n 8.8.8.8");
493 return undef if !$cpid;
497 my $previous_alarm = alarm (10);
499 local $SIG{ALRM
} = sub { die "timed out!\n" };
501 while (defined ($line = <TMP
>)) {
502 print $logfd "DC TRACEROUTE: $line";
503 if ($line =~ m/\s*\d+\s+(\d+\.\d+\.\d+\.\d+)\s/) {
504 my $geoip = `geoiplookup $1`;
505 print $logfd "DC GEOIP: $geoip";
506 if ($geoip =~ m/GeoIP Country Edition:\s*([A-Z]+),/) {
508 print $logfd "DC FOUND: $country\n";
517 alarm ($previous_alarm);
522 print "unable to detect country - $err\n";
524 print "detected country: " . uc($country) . "\n";
526 print "unable to detect country\n";
534 open (my $MEMINFO, '<', '/proc/meminfo');
536 my $res = 512; # default to 512 if something goes wrong
537 while (my $line = <$MEMINFO>) {
538 if ($line =~ m/^MemTotal:\s+(\d+)\s*kB/i) {
539 $res = int ($1 / 1024);
548 my $total_memory = get_memtotal();
551 my ($src, $dest) = @_;
553 my ($dev1,$ino1) = stat ($src);
554 my ($dev2,$ino2) = stat ($dest);
556 return 0 if !($dev1 && $dev2 && $ino1 && $ino2);
558 return $ino1 == $ino2 && $dev1 == $dev2;
561 sub find_stable_path {
562 my ($stabledir, $bdev) = @_;
564 foreach my $path (<$stabledir/*>) {
565 if (link_points_to($path, $bdev)) {
566 return wantarray ? ($path, basename($path)) : $path;
571 sub find_dev_by_uuid {
574 my ($full_path, $name) = find_stable_path("/dev/disk/by-uuid", $bdev);
584 my @disks = split /,/, $opt_testmode;
586 for my $disk (@disks) {
587 push @$res, [-1, $disk, int((-s $disk)/512), "TESTDISK", 512];
594 foreach my $bd (</sys/block/*>) {
595 next if $bd =~ m|^/sys/block/ram\d+$|;
596 next if $bd =~ m|^/sys/block/loop\d+$|;
597 next if $bd =~ m|^/sys/block/md\d+$|;
598 next if $bd =~ m|^/sys/block/dm-.*$|;
599 next if $bd =~ m|^/sys/block/fd\d+$|;
600 next if $bd =~ m|^/sys/block/sr\d+$|;
602 my $dev = file_read_firstline("$bd/dev");
607 my $info = `udevadm info
--path
$bd --query all
`;
610 next if $info !~ m/^E: DEVTYPE=disk$/m;
612 next if $info =~ m/^E: ID_CDROM/m;
613 next if $info =~ m/^E: ID_FS_TYPE=iso9660/m;
615 my ($name) = $info =~ m/^N: (\S+)$/m;
618 my $real_name = "/dev/$name";
620 my $size = file_read_firstline("$bd/size");
622 $size = undef if !($size && $size =~ m/^\d+$/);
624 my $model = file_read_firstline("$bd/device/model") || '';
627 if (length ($model) > 30) {
628 $model = substr ($model, 0, 30);
631 my $logical_bsize = file_read_firstline("$bd/queue/logical_block_size") // '';
632 chomp $logical_bsize;
633 $logical_bsize = undef if !($logical_bsize && $logical_bsize =~ m/^\d+$/);
635 push @$res, [$count++, $real_name, $size, $model, $logical_bsize] if $size;
637 print STDERR "ERROR: unable to map device $dev ($bd)\n";
645 my $countryfn = "${proxmox_libdir}/country.dat";
646 open (my $TMP, "<:encoding(utf8)", "$countryfn") || die "unable to open '$countryfn' - $!\n";
649 my $countryhash = {};
652 while (defined ($line = <$TMP>)) {
653 if ($line =~ m|^map:([^\s:]+):([^:]+):([^:]+):([^:]+):([^:]+):([^:]*):$|) {
661 $kmaphash->{$2} = $1;
662 } elsif ($line =~ m|^([a-z]{2}):([^:]+):([^:]*):([^:]*):$|) {
668 $countryhash->{lc($2)} = $1;
670 warn "unable to parse 'country.dat' line: $line";
678 my $zonefn = "/usr/share/zoneinfo/zone.tab";
679 open ($TMP, '<', "$zonefn") || die "unable to open '$zonefn' - $!\n";
680 while (defined ($line = <$TMP>)) {
681 next if $line =~ m/^\#/;
682 next if $line =~ m/^\s*$/;
683 if ($line =~ m|^([A-Z][A-Z])\s+\S+\s+(([^/]+)/\S+)\s|) {
685 $cczones->{$cc}->{$2} = 1;
686 $country->{$cc}->{zone} = $2 if !defined ($country->{$cc}->{zone});
697 countryhash => $countryhash,
699 kmaphash => $kmaphash,
703 # search for Harddisks
709 foreach my $hd (@$hds) {
710 my ($disk, $devname, $size, $model, $logical_bsize) = @$hd;
711 # size is always (also for 4kn disks) in 512B "sectors"! convert to KB
712 return int($size/2) if $devname eq $dev;
715 die "no such device '$dev'\n";
718 sub logical_blocksize {
721 foreach my $hd (@$hds) {
722 my ($disk, $devname, $size, $model, $logical_bsize) = @$hd;
723 return $logical_bsize if $devname eq $dev;
726 die "no such device '$dev'\n";
729 sub get_partition_dev {
730 my ($dev, $partnum) = @_;
732 if ($dev =~ m|^/dev/sd([a-h]?[a-z]\|i[a-v])$|) {
733 return "${dev}$partnum";
734 } elsif ($dev =~ m|^/dev/xvd[a-z]$|) {
735 # Citrix Hypervisor blockdev
736 return "${dev}$partnum";
737 } elsif ($dev =~ m|^/dev/[hxev]d[a-z]$|) {
738 return "${dev}$partnum";
739 } elsif ($dev =~ m|^/dev/[^/]+/c\d+d\d+$|) {
740 return "${dev}p$partnum";
741 } elsif ($dev =~ m|^/dev/[^/]+/d\d+$|) {
742 return "${dev}p$partnum";
743 } elsif ($dev =~ m|^/dev/[^/]+/hd[a-z]$|) {
744 return "${dev}$partnum";
745 } elsif ($dev =~ m|^/dev/nvme\d+n\d+$|) {
746 return "${dev}p$partnum";
748 die "unable to get device for partition $partnum on device $dev\n";
753 sub file_get_contents {
754 my ($filename, $max) = @_;
756 my $fh = IO::File->new($filename, "r") ||
757 die "can't open '$filename' - $!\n";
759 local $/; # slurp mode
769 my ($text, $filename) = @_;
771 my $fd = IO::File->new(">$filename") ||
772 die "unable to open file '$filename' - $!\n";
777 sub update_progress {
778 my ($frac, $start, $end, $text) = @_;
780 my $part = $end - $start;
781 my $res = $start + $frac * $part;
783 $progress->set_fraction ($res);
784 $progress->set_text (sprintf ("%d%%", int ($res*100)));
785 $progress_status->set_text ($text) if defined ($text);
787 display_info() if $res < 0.9;
789 Gtk3::main_iteration() while Gtk3::events_pending();
794 mkfs => 'mkfs.ext4 -F',
796 mkfs_data_opt => '-m 0',
797 root_mountopt => 'errors=remount-ro',
800 mkfs => 'mkfs.xfs -f',
807 sub create_filesystem {
808 my ($dev, $name, $type, $start, $end, $fs, $fe) = @_;
810 my $range = $end - $start;
811 my $rs = $start + $range*$fs;
812 my $re = $start + $range*$fe;
815 my $fsdata = $fssetup->{$type} || die "internal error - unknown file system '$type'";
816 my $opts = $name eq 'root' ? $fsdata->{mkfs_root_opt} : $fsdata->{mkfs_data_opt};
818 update_progress(0, $rs, $re, "creating $name filesystem");
820 run_command("$fsdata->{mkfs} $opts $dev", sub {
823 if ($line =~ m/Writing inode tables:\s+(\d+)\/(\d+)/) {
825 } elsif ($max && $line =~ m/(\d+)\/$max/) {
826 update_progress(($1/$max)*0.9, $rs, $re);
827 } elsif ($line =~ m/Creating journal.*done/) {
828 update_progress(0.95, $rs, $re);
829 } elsif ($line =~ m/Writing superblocks and filesystem.*done/) {
830 update_progress(1, $rs, $re);
836 my ($targetdir, $dcdata) = @_;
838 my $cfgfile = "/tmp/debconf.txt";
839 write_config($dcdata, "$targetdir/$cfgfile");
840 syscmd("chroot $targetdir debconf-set-selections $cfgfile");
841 unlink "$targetdir/$cfgfile";
845 my ($targetdir, $cmd, $new_cmd) = @_;
847 syscmd("chroot $targetdir dpkg-divert --package proxmox " .
848 "--add --rename $cmd") == 0 ||
849 die "unable to exec dpkg-divert\n";
851 syscmd("ln -sf ${new_cmd} $targetdir/$cmd") == 0 ||
852 die "unable to link diversion to ${new_cmd}\n";
855 sub diversion_remove {
856 my ($targetdir, $cmd) = @_;
858 syscmd("mv $targetdir/${cmd}.distrib $targetdir/${cmd};") == 0 ||
859 die "unable to remove $cmd diversion\n";
861 syscmd("chroot $targetdir dpkg-divert --remove $cmd") == 0 ||
862 die "unable to remove $cmd diversion\n";
866 my ($partitions, $mode) = @_;
868 die "unknown btrfs mode '$mode'"
869 if !($mode eq 'single' || $mode eq 'raid0' ||
870 $mode eq 'raid1' || $mode eq 'raid10');
872 my $cmd = ['mkfs.btrfs', '-f'];
874 push @$cmd, '-d', $mode, '-m', $mode;
876 push @$cmd, @$partitions;
881 sub zfs_create_rpool {
884 my $cmd = "zpool create -f -o cachefile=none";
886 $cmd .= " -o ashift=$config_options->{ashift}"
887 if defined($config_options->{ashift});
889 syscmd("$cmd $zfspoolname $vdev") == 0 ||
890 die "unable to create zfs root pool\n";
892 syscmd("zfs create $zfspoolname/ROOT") == 0 ||
893 die "unable to create zfs $zfspoolname/ROOT volume\n";
895 if ($setup->{product} eq 'pve') {
896 syscmd("zfs create $zfspoolname/data") == 0 ||
897 die "unable to create zfs $zfspoolname/data volume\n";
900 syscmd("zfs create $zfspoolname/ROOT/$zfsrootvolname") == 0 ||
901 die "unable to create zfs $zfspoolname/ROOT/$zfsrootvolname volume\n";
903 # default to `relatime
` on, fast enough for the installer and production
904 syscmd("zfs set atime=on relatime=on $zfspoolname") == 0 ||
905 die "unable to set zfs properties\n";
907 my $value = $config_options->{compress};
908 syscmd("zfs set compression=$value $zfspoolname")
909 if defined($value) && $value ne 'off';
911 $value = $config_options->{checksum};
912 syscmd("zfs set checksum=$value $zfspoolname")
913 if defined($value) && $value ne 'on';
915 $value = $config_options->{copies};
916 syscmd("zfs set copies=$value $zfspoolname")
917 if defined($value) && $value != 1;
920 my $udevadm_trigger_block = sub {
923 sleep(1) if !$nowait; # give kernel time to reread part table
925 # trigger udev to create /dev/disk/by-uuid
926 syscmd("udevadm trigger --subsystem-match block");
927 syscmd("udevadm settle --timeout 10");
930 my $clean_disk = sub {
933 # sort longest first as we need to cleanup depth-first
934 my @partitions = sort { length($b) <=> length($a) }
935 split("\n", `lsblk
--output kname
--noheadings
--path
--list
$disk`);
937 for my $part (@partitions) {
938 next if $part eq $disk;
939 next if $part !~ /^\Q$disk\E/;
940 eval { syscmd
("pvremove -ff -y $part"); };
941 eval { syscmd
("zpool labelclear -f $part"); };
942 eval { syscmd
("dd if=/dev/zero of=$part bs=1M count=16"); };
944 eval { syscmd
("wipefs -a " . cmd2string
(\
@partitions)) };
948 sub partition_bootable_disk
{
949 my ($target_dev, $maxhdsizegb, $ptype) = @_;
951 die "too dangerous" if $opt_testmode;
953 die "unknown partition type '$ptype'"
954 if !($ptype eq '8E00' || $ptype eq '8300' || $ptype eq 'BF01');
956 my $hdsize = hd_size
($target_dev); # size in KB (1024 bytes)
958 my $restricted_hdsize_mb = 0; # 0 ==> end of partition
960 my $maxhdsize = $maxhdsizegb * 1024 * 1024;
961 if ($maxhdsize < $hdsize) {
962 $hdsize = $maxhdsize;
963 $restricted_hdsize_mb = int($hdsize/1024) . 'M';
967 my $hdgb = int($hdsize/(1024*1024));
968 die "hardisk '$target_dev' too small (${hdgb}GB)\n" if $hdgb < 8;
970 syscmd
("sgdisk -Z ${target_dev}");
972 # 1 - BIOS boot partition (Grub Stage2): first free 1M
973 # 2 - EFI ESP: next free 512M
974 # 3 - OS/Data partition: rest, up to $maxhdsize in MB
976 my $grubbootdev = get_partition_dev
($target_dev, 1);
977 my $efibootdev = get_partition_dev
($target_dev, 2);
978 my $osdev = get_partition_dev
($target_dev, 3);
980 my $pcmd = ['sgdisk'];
983 push @$pcmd, "-n${pnum}:1M:+512M", "-t$pnum:EF00";
986 push @$pcmd, "-n${pnum}:513M:${restricted_hdsize_mb}", "-t$pnum:$ptype";
988 push @$pcmd, $target_dev;
990 my $os_size = $hdsize - 513*1024; # 512M efi + 1M bios_boot + 1M alignment
992 syscmd
($pcmd) == 0 ||
993 die "unable to partition harddisk '${target_dev}'\n";
995 my $blocksize = logical_blocksize
($target_dev);
997 if ($blocksize != 4096) {
999 $pcmd = ['sgdisk', '-a1', "-n$pnum:34:2047", "-t$pnum:EF02" , $target_dev];
1001 syscmd
($pcmd) == 0 ||
1002 die "unable to create bios_boot partition '${target_dev}'\n";
1005 &$udevadm_trigger_block();
1007 foreach my $part ($efibootdev, $osdev) {
1008 syscmd
("dd if=/dev/zero of=$part bs=1M count=256") if -b
$part;
1011 return ($os_size, $osdev, $efibootdev);
1014 sub get_pv_list_from_vgname
{
1024 my ($pv, $vg_uuid) = split(/\s+/, $line);
1026 if (!defined($res->{$vg_uuid}->{pvs
})) {
1027 $res->{$vg_uuid}->{pvs
} = "$pv";
1029 $res->{$vg_uuid}->{pvs
} .= ", $pv";
1032 run_command
("pvs --noheadings -o pv_name,vg_uuid -S vg_name='$vgname'", $parser, undef, 1);
1037 sub ask_existing_vg_rename_or_abort
{
1040 # this normally only happens if one put a disk with a PVE installation in
1041 # this server and that disk is not the installation target.
1042 my $duplicate_vgs = get_pv_list_from_vgname
($vgname);
1043 return if !$duplicate_vgs;
1045 my $message = "Detected existing '$vgname' Volume Group(s)! Do you want to:\n";
1047 for my $vg_uuid (keys %$duplicate_vgs) {
1048 my $vg = $duplicate_vgs->{$vg_uuid};
1050 # no high randomnes properties, but this is only for the cases where
1051 # we either have multiple "$vgname" vgs from multiple old PVE disks, or
1052 # we have a disk with both a "$vgname" and "$vgname-old"...
1053 my $short_uid = sprintf "%08X", rand(0xffffffff);
1054 $vg->{new_vgname
} = "$vgname-OLD-$short_uid";
1056 $message .= "rename VG backed by PV '$vg->{pvs}' to '$vg->{new_vgname}'\n";
1058 $message .= "or cancel the installation?";
1060 my $dialog = Gtk3
::MessageDialog-
>new($window, 'modal', 'question', 'ok-cancel', $message);
1061 my $response = $dialog->run();
1064 if ($response eq 'ok') {
1065 for my $vg_uuid (keys %$duplicate_vgs) {
1066 my $vg = $duplicate_vgs->{$vg_uuid};
1067 my $new_vgname = $vg->{new_vgname
};
1069 syscmd
("vgrename $vg_uuid $new_vgname") == 0 ||
1070 die "could not rename VG from '$vg->{pvs}' ($vg_uuid) to '$new_vgname'!\n";
1073 set_next
("_Reboot", sub { exit (0); } );
1074 display_html
("fail.htm");
1075 die "Cancled installation by user, due to already existing volume group '$vgname'\n";
1079 sub create_lvm_volumes
{
1080 my ($lvmdev, $os_size, $swap_size) = @_;
1082 my $vgname = $setup->{product
};
1084 ask_existing_vg_rename_or_abort
($vgname);
1086 my $rootdev = "/dev/$vgname/root";
1087 my $datadev = "/dev/$vgname/data";
1090 # we use --metadatasize 250k, which results in "pe_start = 512"
1091 # so pe_start is aligned on a 128k boundary (advantage for SSDs)
1092 syscmd
("/sbin/pvcreate --metadatasize 250k -y -ff $lvmdev") == 0 ||
1093 die "unable to initialize physical volume $lvmdev\n";
1094 syscmd
("/sbin/vgcreate $vgname $lvmdev") == 0 ||
1095 die "unable to create volume group '$vgname'\n";
1097 my $hdgb = int($os_size/(1024*1024));
1098 my $space = (($hdgb > 128) ?
16 : ($hdgb/8))*1024*1024;
1103 if ($setup->{product
} eq 'pve') {
1106 if ($config_options->{maxroot
}) {
1107 $maxroot = $config_options->{maxroot
};
1112 $rootsize = (($hdgb > ($maxroot*4)) ?
$maxroot : $hdgb/4)*1024*1024;
1114 my $rest = $os_size - $swap_size - $rootsize; # in KB
1117 if (defined($config_options->{minfree
})) {
1118 $minfree = (($config_options->{minfree
}*1024*1024) >= $rest ) ?
$space :
1119 $config_options->{minfree
}*1024*1024 ;
1124 $rest = $rest - $minfree;
1126 if (defined($config_options->{maxvz
})) {
1127 $rest = (($config_options->{maxvz
}*1024*1024) <= $rest) ?
1128 $config_options->{maxvz
}*1024*1024 : $rest;
1134 my $minfree = defined($config_options->{minfree
}) ?
$config_options->{minfree
}*1024*1024 : $space;
1135 $rootsize = $os_size - $minfree - $swap_size; # in KB
1139 syscmd
("/sbin/lvcreate -Wy --yes -L${swap_size}K -nswap $vgname") == 0 ||
1140 die "unable to create swap volume\n";
1142 $swapfile = "/dev/$vgname/swap";
1145 syscmd
("/sbin/lvcreate -Wy --yes -L${rootsize}K -nroot $vgname") == 0 ||
1146 die "unable to create root volume\n";
1148 if ($datasize > 4*1024*1024) {
1149 my $metadatasize = $datasize/100; # default 1% of data
1150 $metadatasize = 1024*1024 if $metadatasize < 1024*1024; # but at least 1G
1151 $metadatasize = 16*1024*1024 if $metadatasize > 16*1024*1024; # but at most 16G
1153 # otherwise the metadata is taken out of $minfree
1154 $datasize -= 2*$metadatasize;
1156 # 1 4MB PE to allow for rounding
1157 $datasize -= 4*1024;
1159 syscmd
("/sbin/lvcreate -Wy --yes -L${datasize}K -ndata $vgname") == 0 ||
1160 die "unable to create data volume\n";
1162 syscmd
("/sbin/lvconvert --yes --type thin-pool --poolmetadatasize ${metadatasize}K $vgname/data") == 0 ||
1163 die "unable to create data thin-pool\n";
1168 syscmd
("/sbin/vgchange -a y $vgname") == 0 ||
1169 die "unable to activate volume group\n";
1171 return ($rootdev, $swapfile, $datadev);
1174 sub compute_swapsize
{
1177 my $hdgb = int($hdsize/(1024*1024));
1180 if (defined($config_options->{swapsize
})) {
1181 $swapsize = $config_options->{swapsize
}*1024*1024;
1183 my $ss = int ($total_memory / 1024);
1185 $ss = ($hdgb/8) if $ss > ($hdgb/8);
1187 $swapsize = $ss*1024*1024;
1193 my sub chroot_chown
{
1194 my ($root, $path, %param) = @_;
1196 my $recursive = $param{recursive
} ?
' -R' : '';
1197 my $user = $param{user
};
1198 die "can not chown without user parameter\n" if !defined($user);
1199 my $group = $param{group
} // $user;
1201 syscmd
("chroot $root /bin/chown $user:$group $recursive $path") == 0 ||
1202 die "chroot: unable to change owner for '$path'\n";
1205 my sub chroot_chmod
{
1206 my ($root, $path, %param) = @_;
1208 my $recursive = $param{recursive
} ?
' -R' : '';
1209 my $mode = $param{mode
};
1210 die "can not chmod without mode parameter\n" if !defined($mode);
1212 syscmd
("chroot $root /bin/chmod $mode $recursive $path") == 0 ||
1213 die "chroot: unable to change permission mode for '$path'\n";
1216 sub prepare_proxmox_boot_esp
{
1217 my ($espdev, $targetdir) = @_;
1219 syscmd
("chroot $targetdir proxmox-boot-tool init $espdev") == 0 ||
1220 die "unable to init ESP and install proxmox-boot loader on '$espdev'\n";
1223 sub prepare_grub_efi_boot_esp
{
1224 my ($dev, $espdev, $targetdir) = @_;
1226 syscmd
("mount -n $espdev -t vfat $targetdir/boot/efi") == 0 ||
1227 die "unable to mount $espdev\n";
1230 my $rc = syscmd
("chroot $targetdir /usr/sbin/grub-install --target x86_64-efi --no-floppy --bootloader-id='proxmox' $dev");
1232 if ($boot_type eq 'efi') {
1233 die "unable to install the EFI boot loader on '$dev'\n";
1235 warn "unable to install the EFI boot loader on '$dev', ignoring (not booted using UEFI)\n";
1238 # also install fallback boot file (OVMF does not boot without)
1239 mkdir("$targetdir/boot/efi/EFI/BOOT");
1240 syscmd
("cp $targetdir/boot/efi/EFI/proxmox/grubx64.efi $targetdir/boot/efi/EFI/BOOT/BOOTx64.EFI") == 0 ||
1241 die "unable to copy efi boot loader\n";
1246 syscmd
("umount $targetdir/boot/efi") == 0 ||
1247 die "unable to umount $targetdir/boot/efi\n";
1251 die "failed to prepare EFI boot using Grub on '$espdev': $err" if $err;
1255 my ($basefile, $targetdir) = @_;
1257 die "target '$targetdir' does not exist\n" if ! -d
$targetdir;
1259 my $starttime = [Time
::HiRes
::gettimeofday
];
1261 my $bootdevinfo = [];
1270 my $filesys = $config_options->{filesys
};
1272 if ($filesys =~ m/zfs/) {
1273 $target_hd = undef; # do not use this config
1275 $targetdir = "/$zfspoolname/ROOT/$zfsrootvolname";
1276 } elsif ($filesys =~ m/btrfs/) {
1277 $target_hd = undef; # do not use this config
1283 for ($i = 5; $i > 0; $i--) {
1284 syscmd
("modprobe zfs");
1285 last if -c
"/dev/zfs";
1289 die "unable to load zfs kernel module\n" if !$i;
1297 update_progress
(0, 0, $maxper, "cleanup root-disks");
1299 syscmd
("vgchange -an") if !$opt_testmode; # deactivate all detected VGs
1301 if ($opt_testmode) {
1303 $rootdev = abs_path
($opt_testmode);
1304 syscmd
("umount $rootdev");
1308 die "unsupported btrfs mode (for testing environment)\n"
1309 if $filesys ne 'btrfs (RAID0)';
1311 btrfs_create
([$rootdev], 'single');
1313 } elsif ($use_zfs) {
1315 die "unsupported zfs mode (for testing environment)\n"
1316 if $filesys ne 'zfs (RAID0)';
1318 syscmd
("zpool destroy $zfstestpool");
1320 zfs_create_rpool
($rootdev);
1327 } elsif ($use_btrfs) {
1329 my ($devlist, $btrfs_mode) = get_btrfs_raid_setup
();
1331 foreach my $hd (@$devlist) {
1332 $clean_disk->(@$hd[1]);
1335 update_progress
(0, 0.02, $maxper, "create partitions");
1337 my $btrfs_partitions = [];
1339 foreach my $hd (@$devlist) {
1340 my $devname = @$hd[1];
1341 my $logical_bsize = @$hd[4];
1343 my ($size, $osdev, $efidev) =
1344 partition_bootable_disk
($devname, $config_options->{hdsize
}, '8300');
1345 $rootdev = $osdev if !defined($rootdev); # simply point to first disk
1346 my $by_id = find_stable_path
("/dev/disk/by-id", $devname);
1347 push @$bootdevinfo, {
1349 devname
=> $devname,
1352 logical_bsize
=> $logical_bsize,
1354 push @$btrfs_partitions, $osdev;
1358 $udevadm_trigger_block->();
1360 update_progress
(0, 0.03, $maxper, "create btrfs");
1362 btrfs_create
($btrfs_partitions, $btrfs_mode);
1364 } elsif ($use_zfs) {
1366 my ($devlist, $vdev) = get_zfs_raid_setup
();
1368 foreach my $hd (@$devlist) {
1369 $clean_disk->(@$hd[1]);
1372 update_progress
(0, 0.02, $maxper, "create partitions");
1374 # install esp/boot part on all, we can only win!
1376 for my $hd (@$devlist) {
1377 my $devname = @$hd[1];
1378 my $logical_bsize = @$hd[4];
1380 my ($size, $osdev, $efidev) =
1381 partition_bootable_disk
($devname, $config_options->{hdsize
}, 'BF01');
1383 push @$bootdevinfo, {
1385 devname
=> $devname,
1387 logical_bsize
=> $logical_bsize,
1392 $udevadm_trigger_block->();
1394 foreach my $di (@$bootdevinfo) {
1395 my $devname = $di->{devname
};
1396 $di->{by_id
} = find_stable_path
("/dev/disk/by-id", $devname);
1398 my $osdev = find_stable_path
("/dev/disk/by-id", $di->{osdev
}) || $di->{osdev
};
1400 $vdev =~ s/ $devname/ $osdev/;
1403 foreach my $hd (@$devlist) {
1404 my $devname = @$hd[1];
1405 my $by_id = find_stable_path
("/dev/disk/by-id", $devname);
1407 $vdev =~ s/ $devname/ $by_id/ if $by_id;
1410 update_progress
(0, 0.03, $maxper, "create rpool");
1412 zfs_create_rpool
($vdev);
1416 die "target '$target_hd' is not a valid block device\n" if ! -b
$target_hd;
1418 $clean_disk->($target_hd);
1420 update_progress
(0, 0.02, $maxper, "create partitions");
1422 my $logical_bsize = logical_blocksize
($target_hd);
1424 my ($os_size, $osdev, $efidev);
1425 ($os_size, $osdev, $efidev) =
1426 partition_bootable_disk
($target_hd, $config_options->{hdsize
}, '8E00');
1428 &$udevadm_trigger_block();
1430 my $by_id = find_stable_path
("/dev/disk/by-id", $target_hd);
1431 push @$bootdevinfo, {
1433 devname
=> $target_hd,
1436 logical_bsize
=> $logical_bsize,
1439 update_progress
(0, 0.03, $maxper, "create LVs");
1441 my $swap_size = compute_swapsize
($os_size);
1442 ($rootdev, $swapfile, $datadev) =
1443 create_lvm_volumes
($osdev, $os_size, $swap_size);
1445 # trigger udev to create /dev/disk/by-uuid
1446 &$udevadm_trigger_block(1);
1450 # to be fast during installation
1451 syscmd
("zfs set sync=disabled $zfspoolname") == 0 ||
1452 die "unable to set zfs properties\n";
1455 update_progress
(0.04, 0, $maxper, "create swap space");
1457 syscmd
("mkswap -f $swapfile") == 0 ||
1458 die "unable to create swap space\n";
1461 update_progress
(0.045, 0, $maxper, "creating root filesystems");
1463 foreach my $di (@$bootdevinfo) {
1464 next if !$di->{esp
};
1465 # FIXME remove '-s1' once https://github.com/dosfstools/dosfstools/issues/111 is fixed
1466 my $vfat_extra_opts = ($di->{logical_bsize
} == 4096) ?
'-s1' : '';
1467 syscmd
("mkfs.vfat $vfat_extra_opts -F32 $di->{esp}") == 0 ||
1468 die "unable to initialize EFI ESP on device $di->{esp}\n";
1473 } elsif ($use_btrfs) {
1476 create_filesystem
($rootdev, 'root', $filesys, 0.05, $maxper, 0, 1);
1479 update_progress
(1, 0.05, $maxper, "mounting target $rootdev");
1484 my $mount_opts = 'noatime';
1485 $mount_opts .= ',nobarrier'
1486 if $use_btrfs || $filesys =~ /^ext\d$/;
1488 syscmd
("mount -n $rootdev -o $mount_opts $targetdir") == 0 ||
1489 die "unable to mount $rootdev\n";
1492 mkdir "$targetdir/boot";
1493 mkdir "$targetdir/boot/efi";
1495 mkdir "$targetdir/var";
1496 mkdir "$targetdir/var/lib";
1498 if ($setup->{product
} eq 'pve') {
1499 mkdir "$targetdir/var/lib/vz";
1500 mkdir "$targetdir/var/lib/pve";
1503 syscmd
("btrfs subvolume create $targetdir/var/lib/pve/local-btrfs") == 0 ||
1504 die "unable to create btrfs subvolume\n";
1508 mkdir "$targetdir/mnt";
1509 mkdir "$targetdir/mnt/hostrun";
1510 syscmd
("mount --bind /run $targetdir/mnt/hostrun") == 0 ||
1511 die "unable to bindmount run on $targetdir/mnt/hostrun\n";
1513 update_progress
(1, 0.05, $maxper, "extracting base system");
1515 my ($dev,$ino,$mode,$nlink,$uid,$gid,$rdev,$size) = stat ($basefile);
1516 $ino || die "unable to open file '$basefile' - $!\n";
1518 my $files = file_read_firstline
("${proxmox_cddir}/proxmox/$setup->{product}-base.cnt") ||
1519 die "unable to read base file count\n";
1524 run_command
("unsquashfs -f -dest $targetdir -i $basefile", sub {
1526 return if $line !~ m/^$targetdir/;
1528 my $nper = int (($count *100)/$files);
1529 if ($nper != $per) {
1531 my $frac = $per > 100 ?
1 : $per/100;
1532 update_progress
($frac, $maxper, 0.5);
1536 syscmd
("mount -n -t tmpfs tmpfs $targetdir/tmp") == 0 || die "unable to mount tmpfs on $targetdir/tmp\n";
1538 mkdir "$targetdir/tmp/pkg";
1539 syscmd
("mount -n --bind '$proxmox_pkgdir' '$targetdir/tmp/pkg'") == 0
1540 || die "unable to bind-mount packages on $targetdir/tmp/pkg\n";
1541 syscmd
("mount -n -t proc proc $targetdir/proc") == 0 || die "unable to mount proc on $targetdir/proc\n";
1542 syscmd
("mount -n -t sysfs sysfs $targetdir/sys") == 0 || die "unable to mount sysfs on $targetdir/sys\n";
1543 if ($boot_type eq 'efi') {
1544 syscmd
("mount -n -t efivarfs efivarfs $targetdir/sys/firmware/efi/efivars") == 0 ||
1545 die "unable to mount efivarfs on $targetdir/sys/firmware/efi/efivars: $!\n";
1547 syscmd
("chroot $targetdir mount --bind /mnt/hostrun /run") == 0 ||
1548 die "unable to re-bindmount hostrun on /run in chroot\n";
1550 update_progress
(1, $maxper, 0.5, "configuring base system");
1555 "127.0.0.1 localhost.localdomain localhost\n" .
1556 "$ipaddress $hostname.$domain $hostname\n\n" .
1557 "# The following lines are desirable for IPv6 capable hosts\n\n" .
1558 "::1 ip6-localhost ip6-loopback\n" .
1559 "fe00::0 ip6-localnet\n" .
1560 "ff00::0 ip6-mcastprefix\n" .
1561 "ff02::1 ip6-allnodes\n" .
1562 "ff02::2 ip6-allrouters\n" .
1563 "ff02::3 ip6-allhosts\n";
1565 write_config
($hosts, "$targetdir/etc/hosts");
1567 write_config
("$hostname\n", "$targetdir/etc/hostname");
1569 syscmd
("/bin/hostname $hostname") if !$opt_testmode;
1571 # configure interfaces
1573 my $ifaces = "auto lo\niface lo inet loopback\n\n";
1575 my $ntype = $ipversion == 4 ?
'inet' : 'inet6';
1577 my $ethdev = $ipconf->{ifaces
}->{$ipconf->{selected
}}->{name
};
1579 if ($setup->{bridged_network
}) {
1580 $ifaces .= "iface $ethdev $ntype manual\n";
1583 "\nauto vmbr0\niface vmbr0 $ntype static\n" .
1584 "\taddress $cidr\n" .
1585 "\tgateway $gateway\n" .
1586 "\tbridge-ports $ethdev\n" .
1587 "\tbridge-stp off\n" .
1590 $ifaces .= "auto $ethdev\n" .
1591 "iface $ethdev $ntype static\n" .
1592 "\taddress $cidr\n" .
1593 "\tgateway $gateway\n";
1596 foreach my $iface (sort keys %{$ipconf->{ifaces
}}) {
1597 my $name = $ipconf->{ifaces
}->{$iface}->{name
};
1598 next if $name eq $ethdev;
1600 $ifaces .= "\niface $name $ntype manual\n";
1603 write_config
($ifaces, "$targetdir/etc/network/interfaces");
1607 my $resolvconf = "search $domain\nnameserver $dnsserver\n";
1608 write_config
($resolvconf, "$targetdir/etc/resolv.conf");
1612 my $fstab = "# <file system> <mount point> <type> <options> <dump> <pass>\n";
1616 } elsif ($use_btrfs) {
1618 my $cmd = "blkid -u filesystem -t TYPE=btrfs -o export $rootdev";
1619 run_command
($cmd, sub {
1622 if ($line =~ m/^UUID=([A-Fa-f0-9\-]+)$/) {
1627 die "unable to detect FS UUID" if !defined($fsuuid);
1629 $fstab .= "UUID=$fsuuid / btrfs defaults 0 1\n";
1631 my $root_mountopt = $fssetup->{$filesys}->{root_mountopt
} || 'defaults';
1632 $fstab .= "$rootdev / $filesys ${root_mountopt} 0 1\n";
1636 # Note: this is required by current grub, but really dangerous, because
1637 # vfat does not have journaling, so it triggers manual fsck after each crash
1638 # so we only mount /boot/efi if really required (efi systems).
1639 if ($boot_type eq 'efi' && !$use_zfs) {
1640 if (scalar(@$bootdevinfo)) {
1641 my $di = @$bootdevinfo[0]; # simply use first disk
1644 my $efi_boot_uuid = $di->{esp
};
1645 if (my $uuid = find_dev_by_uuid
($di->{esp
})) {
1646 $efi_boot_uuid = "UUID=$uuid";
1649 $fstab .= "${efi_boot_uuid} /boot/efi vfat defaults 0 1\n";
1655 $fstab .= "$swapfile none swap sw 0 0\n" if $swapfile;
1657 $fstab .= "proc /proc proc defaults 0 0\n";
1659 write_config
($fstab, "$targetdir/etc/fstab");
1660 write_config
("", "$targetdir/etc/mtab");
1662 syscmd
("cp ${proxmox_libdir}/policy-disable-rc.d " .
1663 "$targetdir/usr/sbin/policy-rc.d") == 0 ||
1664 die "unable to copy policy-rc.d\n";
1665 syscmd
("cp ${proxmox_libdir}/fake-start-stop-daemon " .
1666 "$targetdir/sbin/") == 0 ||
1667 die "unable to copy start-stop-daemon\n";
1669 diversion_add
($targetdir, "/sbin/start-stop-daemon", "/sbin/fake-start-stop-daemon");
1670 diversion_add
($targetdir, "/usr/sbin/update-grub", "/bin/true");
1671 diversion_add
($targetdir, "/usr/sbin/update-initramfs", "/bin/true");
1673 my $machine_id = run_command
("systemd-id128 new");
1674 die "unable to create a new machine-id\n" if ! $machine_id;
1675 write_config
($machine_id, "$targetdir/etc/machine-id");
1677 syscmd
("cp /etc/hostid $targetdir/etc/") == 0 ||
1678 die "unable to copy hostid\n";
1680 syscmd
("touch $targetdir/proxmox_install_mode");
1682 my $grub_install_devices_txt = '';
1683 foreach my $di (@$bootdevinfo) {
1684 $grub_install_devices_txt .= ', ' if $grub_install_devices_txt;
1685 $grub_install_devices_txt .= $di->{by_id
} || $di->{devname
};
1688 # Note: keyboard-configuration/xbkb-keymap is used by console-setup
1689 my $xkmap = $cmap->{kmap
}->{$keymap}->{x11
} // 'us';
1691 debconfig_set
($targetdir, <<_EOD);
1692 locales locales/default_environment_locale select en_US.UTF-8
1693 locales locales/locales_to_be_generated select en_US.UTF-8 UTF-8
1694 samba-common samba-common/dhcp boolean false
1695 samba-common samba-common/workgroup string WORKGROUP
1696 postfix postfix/main_mailer_type select No configuration
1697 keyboard-configuration keyboard-configuration/xkb-keymap select $xkmap
1698 d-i debian-installer/locale select en_US.UTF-8
1699 grub-pc grub-pc/install_devices select $grub_install_devices_txt
1703 while (<${proxmox_pkgdir
}/*.deb
>) { $pkg_count++ };
1705 # btrfs/dpkg is extremely slow without --force-unsafe-io
1706 my $dpkg_opts = $use_btrfs ?
"--force-unsafe-io" : "";
1709 while (<${proxmox_pkgdir
}/*.deb
>) {
1712 my ($deb) = $path =~ m/${proxmox_pkgdir}\/(.*\
.deb
)/;
1713 update_progress
($count/$pkg_count, 0.5, 0.75, "extracting $deb");
1714 print "extracting: $deb\n";
1715 syscmd
("chroot $targetdir dpkg $dpkg_opts --force-depends --no-triggers --unpack /tmp/pkg/$deb") == 0
1716 || die "installation of package $deb failed\n";
1717 update_progress
((++$count)/$pkg_count, 0.5, 0.75);
1720 # needed for postfix postinst in case no other NIC is active
1721 syscmd
("chroot $targetdir ifup lo");
1723 my $cmd = "chroot $targetdir dpkg $dpkg_opts --force-confold --configure -a";
1725 run_command
($cmd, sub {
1727 if ($line =~ m/Setting up\s+(\S+)/) {
1728 update_progress
((++$count)/$pkg_count, 0.75, 0.95, "configuring $1");
1732 unlink "$targetdir/etc/mailname";
1733 $postfix_main_cf =~ s/__FQDN__/${hostname}.${domain}/;
1734 write_config
($postfix_main_cf, "$targetdir/etc/postfix/main.cf");
1736 # make sure we have all postfix directories
1737 syscmd
("chroot $targetdir /usr/sbin/postfix check");
1738 # cleanup mail queue
1739 syscmd
("chroot $targetdir /usr/sbin/postsuper -d ALL");
1740 # create /etc/aliases.db (/etc/aliases is shipped in the base squashfs)
1741 syscmd
("chroot $targetdir /usr/bin/newaliases");
1743 # enable NTP (timedatectl set-ntp true does not work without DBUS)
1744 syscmd
("chroot $targetdir /bin/systemctl enable systemd-timesyncd.service");
1746 unlink "$targetdir/proxmox_install_mode";
1749 unlink ("$targetdir/etc/localtime");
1750 symlink ("/usr/share/zoneinfo/$timezone", "$targetdir/etc/localtime");
1751 write_config
("$timezone\n", "$targetdir/etc/timezone");
1754 if (my $mirror = $cmap->{country
}->{$country}->{mirror
}) {
1755 my $fn = "$targetdir/etc/apt/sources.list";
1756 syscmd
("sed -i 's/ftp\\.debian\\.org/$mirror/' '$fn'");
1759 # create extended_states for apt (avoid cron job warning if that
1760 # file does not exist)
1761 write_config
('', "$targetdir/var/lib/apt/extended_states");
1763 # allow ssh root login
1764 syscmd
(['sed', '-i', 's/^#\?PermitRootLogin.*/PermitRootLogin yes/', "$targetdir/etc/ssh/sshd_config"]);
1766 if ($setup->{product
} eq 'pmg') {
1767 # install initial clamav DB
1768 my $srcdir = "${proxmox_cddir}/proxmox/clamav";
1769 foreach my $fn ("main.cvd", "bytecode.cvd", "daily.cvd", "safebrowsing.cvd") {
1770 syscmd
("cp \"$srcdir/$fn\" \"$targetdir/var/lib/clamav\"") == 0 ||
1771 die "installation of clamav db file '$fn' failed\n";
1773 syscmd
("chroot $targetdir /bin/chown clamav:clamav -R /var/lib/clamav") == 0 ||
1774 die "unable to set owner for clamav database files\n";
1777 if ($setup->{product
} eq 'pve') {
1778 # save installer settings
1779 my $ucc = uc ($country);
1780 debconfig_set
($targetdir, "pve-manager pve-manager/country string $ucc\n");
1783 update_progress
(0.8, 0.95, 1, "make system bootable");
1786 # add ZFS options while preserving existing kernel cmdline
1787 my $zfs_snippet = "GRUB_CMDLINE_LINUX=\"\$GRUB_CMDLINE_LINUX root=ZFS=$zfspoolname/ROOT/$zfsrootvolname boot=zfs\"";
1788 write_config
($zfs_snippet, "$targetdir/etc/default/grub.d/zfs.cfg");
1790 write_config
("root=ZFS=$zfspoolname/ROOT/$zfsrootvolname boot=zfs\n", "$targetdir/etc/kernel/cmdline");
1794 diversion_remove
($targetdir, "/usr/sbin/update-grub");
1795 diversion_remove
($targetdir, "/usr/sbin/update-initramfs");
1798 foreach my $fn (<$targetdir/lib/modules/*>) {
1799 if ($fn =~ m!/(\d+\.\d+\.\d+-\d+-pve)$!) {
1800 die "found multiple kernels\n" if defined($kapi);
1804 die "unable to detect kernel version\n" if !defined($kapi);
1806 if (!$opt_testmode) {
1808 unlink ("$targetdir/etc/mtab");
1809 symlink ("/proc/mounts", "$targetdir/etc/mtab");
1810 syscmd
("mount -n --bind /dev $targetdir/dev");
1812 my $bootloader_err_list = [];
1814 syscmd
("chroot $targetdir /usr/sbin/update-initramfs -c -k $kapi") == 0 ||
1815 die "unable to install initramfs\n";
1817 my $native_4k_disk_bootable = 0;
1818 foreach my $di (@$bootdevinfo) {
1819 $native_4k_disk_bootable |= ($di->{logical_bsize
} == 4096);
1822 foreach my $di (@$bootdevinfo) {
1823 my $dev = $di->{devname
};
1825 prepare_proxmox_boot_esp
($di->{esp
}, $targetdir);
1827 if (!$native_4k_disk_bootable) {
1829 syscmd
("chroot $targetdir /usr/sbin/grub-install --target i386-pc --no-floppy --bootloader-id='proxmox' $dev") == 0 ||
1830 die "unable to install the i386-pc boot loader on '$dev'\n";
1832 push @$bootloader_err_list, $@ if $@;
1836 if (my $esp = $di->{esp
}) {
1837 prepare_grub_efi_boot_esp
($dev, $esp, $targetdir);
1841 push @$bootloader_err_list, $@ if $@;
1844 syscmd
("chroot $targetdir /usr/sbin/update-grub") == 0 ||
1845 die "unable to update boot loader config\n";
1847 push @$bootloader_err_list, $@ if $@;
1849 if (scalar(@$bootloader_err_list) > 0) {
1850 $bootloader_err = "bootloader setup errors:\n";
1851 map { $bootloader_err .= "- $_" } @$bootloader_err_list;
1852 warn $bootloader_err;
1855 syscmd
("umount $targetdir/dev");
1860 unlink "$targetdir/usr/sbin/policy-rc.d";
1862 diversion_remove
($targetdir, "/sbin/start-stop-daemon");
1865 my $octets = encode
("utf-8", $password);
1866 run_command
("chroot $targetdir /usr/sbin/chpasswd", undef,
1869 if ($setup->{product
} eq 'pmg') {
1871 write_config
("section: admin\n\temail ${mailto}\n",
1872 "$targetdir/etc/pmg/pmg.conf");
1874 } elsif ($setup->{product
} eq 'pve') {
1878 my $tmpdir = "$targetdir/tmp/pve";
1881 # write vnc keymap to datacenter.cfg
1882 my $vnckmap = $cmap->{kmap
}->{$keymap}->{kvm
} || 'en-us';
1883 write_config
("keyboard: $vnckmap\n",
1884 "$tmpdir/datacenter.cfg");
1887 write_config
("user:root\@pam:1:0:::${mailto}::\n", "$tmpdir/user.cfg");
1890 my $storage_cfg_fn = "$tmpdir/storage.cfg";
1892 write_config
($storage_cfg_zfs, $storage_cfg_fn);
1893 } elsif ($use_btrfs) {
1894 write_config
($storage_cfg_btrfs, $storage_cfg_fn);
1895 } elsif ($datadev) {
1896 write_config
($storage_cfg_lvmthin, $storage_cfg_fn);
1898 write_config
($storage_cfg_local, $storage_cfg_fn);
1901 run_command
("chroot $targetdir /usr/bin/create_pmxcfs_db /tmp/pve /var/lib/pve-cluster/config.db");
1903 syscmd
("rm -rf $tmpdir");
1904 } elsif ($setup->{product
} eq 'pbs') {
1905 my $base_cfg_path = "/etc/proxmox-backup";
1906 mkdir "$targetdir/$base_cfg_path";
1908 chroot_chown
($targetdir, $base_cfg_path, user
=> 'backup', recursive
=> 1);
1909 chroot_chmod
($targetdir, $base_cfg_path, mode
=> '0700');
1911 my $user_cfg_fn = "$base_cfg_path/user.cfg";
1912 write_config
("user: root\@pam\n\temail ${mailto}\n", "$targetdir/$user_cfg_fn");
1913 chroot_chown
($targetdir, $user_cfg_fn, user
=> 'root', group
=> 'backup');
1914 chroot_chmod
($targetdir, $user_cfg_fn, mode
=> '0640');
1920 update_progress
(1, 0, 1, "");
1924 if ($opt_testmode) {
1925 my $elapsed = Time
::HiRes
::tv_interval
($starttime);
1926 print "Elapsed extract time: $elapsed\n";
1928 syscmd
("chroot $targetdir /usr/bin/dpkg-query -W --showformat='\${package}\n'> final.pkglist");
1931 syscmd
("umount $targetdir/run");
1932 syscmd
("umount $targetdir/mnt/hostrun");
1933 syscmd
("umount $targetdir/tmp/pkg");
1934 syscmd
("umount $targetdir/tmp");
1935 syscmd
("umount $targetdir/proc");
1936 syscmd
("umount $targetdir/sys/firmware/efi/efivars");
1937 syscmd
("umount $targetdir/sys");
1940 syscmd
("zfs umount -a") == 0 ||
1941 die "unable to unmount zfs\n";
1943 syscmd
("umount -d $targetdir");
1946 if (!$err && $use_zfs) {
1947 syscmd
("zfs set sync=standard $zfspoolname") == 0 ||
1948 die "unable to set zfs properties\n";
1950 syscmd
("zfs set mountpoint=/ $zfspoolname/ROOT/$zfsrootvolname") == 0 ||
1951 die "zfs set mountpoint failed\n";
1953 syscmd
("zpool set bootfs=$zfspoolname/ROOT/$zfsrootvolname $zfspoolname") == 0 ||
1954 die "zfs set bootfs failed\n";
1955 syscmd
("zpool export $zfspoolname");
1958 if ($bootloader_err) {
1959 $err = $err ?
"$err\n$bootloader_err" : $bootloader_err;
1965 my $last_display_change = 0;
1967 my $display_info_counter = 0;
1969 my $display_info_items = [
1970 "extract1-license.htm",
1971 "extract2-rulesystem.htm",
1972 "extract3-spam.htm",
1973 "extract4-virus.htm",
1978 my $min_display_time = 15;
1982 return if ($ctime - $last_display_change) < $min_display_time;
1984 my $page = $display_info_items->[$display_info_counter % scalar(@$display_info_items)];
1986 $display_info_counter++;
1988 display_html
($page);
1992 my ($filename) = @_;
1994 $filename = $steps[$step_number]->{html
} if !$filename;
1996 my $htmldir = "${proxmox_libdir}/html";
1998 if (-f
"$htmldir/$setup->{product}/$filename") {
1999 $path = "$htmldir/$setup->{product}/$filename";
2001 $path = "$htmldir/$filename";
2004 my $data = file_get_contents
($path);
2006 if ($filename eq 'license.htm') {
2007 my $license = eval { decode
('utf8', file_get_contents
("${proxmox_cddir}/EULA")) };
2009 die $err if !$opt_testmode;
2010 $license = "TESTMODE: Ignore non existent EULA...\n";
2012 my $title = "END USER LICENSE AGREEMENT (EULA)";
2013 $data =~ s/__LICENSE__/$license/;
2014 $data =~ s/__LICENSE_TITLE__/$title/;
2015 } elsif ($filename eq 'success.htm') {
2016 my $addr = $ipversion == 6 ?
"[${ipaddress}]" : "$ipaddress";
2017 $data =~ s/__IPADDR__/$addr/g;
2018 $data =~ s/__PORT__/$setup->{port}/g;
2020 my $autoreboot_msg = $config_options->{autoreboot
}
2021 ?
"Automatic reboot scheduled in $autoreboot_seconds seconds."
2023 $data =~ s/__AUTOREBOOT_MSG__/$autoreboot_msg/;
2025 $data =~ s/__FULL_PRODUCT_NAME__/$setup->{fullname}/g;
2027 # always set base-path to common path, all resources are accesible from there.
2028 $htmlview->load_html($data, "file://$htmldir/");
2030 $last_display_change = time();
2035 my ($text, $fctn) = @_;
2037 $fctn = $step_number if !$fctn;
2038 $text = "_Previous" if !$text;
2039 $prev_btn->set_label ($text);
2042 $steps[$step_number]->{function
}();
2044 $prev_btn->grab_focus();
2048 my ($text, $fctn) = @_;
2051 my $step = $steps[$step_number];
2052 $text //= $steps[$step_number]->{next_button
} // '_Next';
2053 $next->set_label($text);
2055 $next->grab_focus();
2058 sub create_main_window
{
2060 $window = Gtk3
::Window-
>new();
2061 $window->set_default_size(1024, 768);
2062 $window->set_has_resize_grip(0);
2063 $window->fullscreen() if !$opt_testmode;
2064 $window->set_decorated(0) if !$opt_testmode;
2066 my $vbox = Gtk3
::VBox-
>new(0, 0);
2068 my $logofn = "$setup->{product}-banner.png";
2069 my $image = Gtk3
::Image-
>new_from_file("${proxmox_libdir}/$logofn");
2070 $vbox->pack_start($image, 0, 0, 0);
2072 my $hbox = Gtk3
::HBox-
>new(0, 0);
2073 $vbox->pack_start($hbox, 1, 1, 0);
2075 # my $f1 = Gtk3::Frame->new ('test');
2076 # $f1->set_shadow_type ('none');
2077 # $hbox->pack_start ($f1, 1, 1, 0);
2079 my $sep1 = Gtk3
::HSeparator-
>new();
2080 $vbox->pack_start($sep1, 0, 0, 0);
2082 $cmdbox = Gtk3
::HBox-
>new();
2083 $vbox->pack_start($cmdbox, 0, 0, 10);
2085 $next = Gtk3
::Button-
>new('_Next');
2086 $next->signal_connect(clicked
=> sub { $last_display_change = 0; &$next_fctn (); });
2087 $cmdbox->pack_end($next, 0, 0, 10);
2090 $prev_btn = Gtk3
::Button-
>new('_Previous');
2091 $prev_btn->signal_connect(clicked
=> sub { $last_display_change = 0; &prev_function
(); });
2092 $cmdbox->pack_end($prev_btn, 0, 0, 10);
2095 my $abort = Gtk3
::Button-
>new('_Abort');
2096 $abort->set_can_focus(0);
2097 $cmdbox->pack_start($abort, 0, 0, 10);
2098 $abort->signal_connect(clicked
=> sub { exit (-1); });
2100 my $vbox2 = Gtk3
::VBox-
>new(0, 0);
2103 $htmlview = Gtk3
::WebKit2
::WebView-
>new();
2104 my $scrolls = Gtk3
::ScrolledWindow-
>new();
2105 $scrolls->add($htmlview);
2107 my $hbox2 = Gtk3
::HBox-
>new(0, 0);
2108 $hbox2->pack_start($scrolls, 1, 1, 0);
2110 $vbox2->pack_start($hbox2, 1, 1, 0);
2112 my $vbox3 = Gtk3
::VBox-
>new(0, 0);
2113 $vbox2->pack_start($vbox3, 0, 0, 0);
2115 my $sep2 = Gtk3
::HSeparator-
>new;
2116 $vbox3->pack_start($sep2, 0, 0, 0);
2118 $inbox = Gtk3
::HBox-
>new(0, 0);
2119 $vbox3->pack_start($inbox, 0, 0, 0);
2121 $window->add($vbox);
2128 $inbox->foreach(sub {
2130 $inbox->remove ($child);
2134 # fixme: newer GTK3 has special properties to handle numbers with Entry
2135 # only allow floating point numbers with Gtk3::Entry
2138 my ($entry, $event) = @_;
2140 return check_number
($entry, $event, 1);
2144 my ($entry, $event) = @_;
2146 return check_number
($entry, $event, 0);
2150 my ($entry, $event, $float) = @_;
2152 my $val = $event->get_keyval;
2154 if (($float && $val == ord '.') ||
2155 $val == Gtk3
::Gdk
::KEY_ISO_Left_Tab
||
2156 $val == Gtk3
::Gdk
::KEY_Shift_L
||
2157 $val == Gtk3
::Gdk
::KEY_Tab
||
2158 $val == Gtk3
::Gdk
::KEY_Left
||
2159 $val == Gtk3
::Gdk
::KEY_Right
||
2160 $val == Gtk3
::Gdk
::KEY_BackSpace
||
2161 $val == Gtk3
::Gdk
::KEY_Delete
||
2162 ($val >= ord '0' && $val <= ord '9') ||
2163 ($val >= Gtk3
::Gdk
::KEY_KP_0
&&
2164 $val <= Gtk3
::Gdk
::KEY_KP_9
)) {
2171 sub create_text_input
{
2172 my ($default, $text) = @_;
2174 my $hbox = Gtk3
::Box-
>new('horizontal', 0);
2176 my $label = Gtk3
::Label-
>new($text);
2177 $label->set_size_request(150, -1);
2178 $label->set_alignment(1, 0.5);
2179 $hbox->pack_start($label, 0, 0, 10);
2180 my $e1 = Gtk3
::Entry-
>new();
2181 $e1->set_width_chars(35);
2182 $hbox->pack_start($e1, 0, 0, 0);
2183 $e1->set_text($default);
2185 return ($hbox, $e1);
2187 sub create_cidr_inputs
{
2188 my ($default_ip, $default_mask) = @_;
2190 my $hbox = Gtk3
::Box-
>new('horizontal', 0);
2192 my $label = Gtk3
::Label-
>new('IP Address (CIDR)');
2193 $label->set_size_request(150, -1);
2194 $label->set_alignment(1, 0.5);
2195 $hbox->pack_start($label, 0, 0, 10);
2197 my $ip_el = Gtk3
::Entry-
>new();
2198 $ip_el->set_width_chars(28);
2199 $hbox->pack_start($ip_el, 0, 0, 0);
2200 $ip_el->set_text($default_ip);
2202 $label = Gtk3
::Label-
>new('/');
2203 $label->set_size_request(10, -1);
2204 $label->set_alignment(0.5, 0.5);
2205 $hbox->pack_start($label, 0, 0, 2);
2207 my $cidr_el = Gtk3
::Entry-
>new();
2208 $cidr_el->set_width_chars(3);
2209 $hbox->pack_start($cidr_el, 0, 0, 0);
2210 $cidr_el->set_text($default_mask);
2212 return ($hbox, $ip_el, $cidr_el);
2220 my $links = `ip -o l`;
2221 foreach my $l (split /\n/,$links) {
2222 my ($index, $name, $flags, $state, $mac) = $l =~ m/^(\d+):\s+(\S+):\s+<(\S+)>.*\s+state\s+(\S+)\s+.*\s+link\/ether\s
+(\S
+)\s
+/;
2223 next if !$name || $name eq 'lo';
2225 my $driver = readlink "/sys/class/net/$name/device/driver" || 'unknown';
2226 $driver =~ s!^.*/!!;
2228 $ifaces->{"$index"} = {
2236 my $addresses = `ip -o a s $name`;
2237 foreach my $a (split /\n/,$addresses) {
2238 my ($family, $ip, $prefix) = $a =~ m/^\Q$index\E:\s+\Q$name\E\s+(inet|inet6)\s+($IPRE)\/(\d+)\s+/;
2240 next if $a =~ /scope\s+link/; # ignore link local
2244 if ($family eq 'inet') {
2245 next if !$ip =~ /$IPV4RE/;
2246 next if $prefix < 8 || $prefix > 32;
2247 $mask = @$ipv4_reverse_mask[$prefix];
2249 next if !$ip =~ /$IPV6RE/;
2252 $default = $index if !$default;
2254 $ifaces->{"$index"}->{"$family"} = {
2263 my $route = `ip route
`;
2264 my ($gateway) = $route =~ m/^default\s+via\s+(\S+)\s+/m;
2266 my $resolvconf = `cat
/etc/resolv
.conf
`;
2267 my ($dnsserver) = $resolvconf =~ m/^nameserver\s+(\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3})$/m;
2268 my ($domain) = $resolvconf =~ m/^domain\s+(\S+)$/m;
2271 default => $default,
2273 gateway => $gateway,
2274 dnsserver => $dnsserver,
2279 sub display_message {
2282 my $dialog = Gtk3::MessageDialog->new($window, 'modal', 'info', 'ok', $msg);
2290 my $dialog = Gtk3::MessageDialog->new($window, 'modal', 'error', 'ok', $msg);
2295 my $ipconf_first_view = 1;
2297 sub create_ipconf_view {
2302 my $vcontainer = Gtk3::Box->new('vertical', 0);
2303 $inbox->pack_start($vcontainer, 1, 0, 0);
2304 my $hcontainer = Gtk3::Box->new('horizontal', 0);
2305 $vcontainer->pack_start($hcontainer, 0, 0, 10);
2306 my $vbox = Gtk3::Box->new('vertical', 0);
2307 $hcontainer->add($vbox);
2309 my $ipaddr_text = $config->{ipaddress} // "192.168.100.2";
2310 my $netmask_text = $config->{netmask} // "24";
2312 ($cidr_box, $ipconf_entry_addr, $ipconf_entry_mask) =
2313 create_cidr_inputs($ipaddr_text, $netmask_text);
2315 my $device_cb = Gtk3::ComboBoxText->new();
2316 $device_cb->set_active(0);
2317 $device_cb->set_visible(1);
2319 my $get_device_desc = sub {
2321 return "$iface->{name} - $iface->{mac} ($iface->{driver})";
2324 my $device_active_map = {};
2325 my $device_active_reverse_map = {};
2327 my $device_change_handler = sub {
2328 my $current = shift;
2330 my $new = $device_active_map->{$current->get_active()};
2331 return if defined($ipconf->{selected}) && $new eq $ipconf->{selected};
2333 $ipconf->{selected} = $new;
2334 my $iface = $ipconf->{ifaces}->{$ipconf->{selected}};
2335 $config->{mngmt_nic} = $iface->{name};
2336 $ipconf_entry_addr->set_text($iface->{inet}->{addr} || $iface->{inet6}->{addr})
2337 if $iface->{inet}->{addr} || $iface->{inet6}->{addr};
2338 $ipconf_entry_mask->set_text($iface->{inet}->{prefix} || $iface->{inet6}->{prefix})
2339 if $iface->{inet}->{prefix} || $iface->{inet6}->{prefix};
2343 foreach my $index (sort keys %{$ipconf->{ifaces}}) {
2344 $device_cb->append_text(&$get_device_desc($ipconf->{ifaces}->{$index}));
2345 $device_active_map->{$i} = $index;
2346 $device_active_reverse_map->{$ipconf->{ifaces}->{$index}->{name}} = $i;
2347 if ($ipconf_first_view && $index == $ipconf->{default}) {
2348 $device_cb->set_active($i);
2349 &$device_change_handler($device_cb);
2350 $ipconf_first_view = 0;
2352 $device_cb->signal_connect('changed' => $device_change_handler);
2356 if (my $nic = $config->{mngmt_nic}) {
2357 $device_cb->set_active($device_active_reverse_map->{$nic} // 0);
2359 $device_cb->set_active(0);
2362 my $devicebox = Gtk3::HBox->new(0, 0);
2363 my $label = Gtk3::Label->new("Management Interface:");
2364 $label->set_size_request(150, -1);
2365 $label->set_alignment(1, 0.5);
2366 $devicebox->pack_start($label, 0, 0, 10);
2367 $devicebox->pack_start($device_cb, 0, 0, 0);
2369 $vbox->pack_start($devicebox, 0, 0, 2);
2371 my $hn = $config->{fqdn} // "$setup->{product}." . ($ipconf->{domain} // "example.invalid");
2373 my ($hostbox, $hostentry) = create_text_input($hn, 'Hostname (FQDN):');
2374 $vbox->pack_start($hostbox, 0, 0, 2);
2376 $vbox->pack_start($cidr_box, 0, 0, 2);
2378 $gateway = $config->{gateway} // $ipconf->{gateway} || '192.168.100.1';
2381 ($gwbox, $ipconf_entry_gw) =
2382 create_text_input($gateway, 'Gateway:');
2384 $vbox->pack_start($gwbox, 0, 0, 2);
2386 $dnsserver = $config->{dnsserver} // $ipconf->{dnsserver} || $gateway;
2389 ($dnsbox, $ipconf_entry_dns) =
2390 create_text_input($dnsserver, 'DNS Server:');
2392 $vbox->pack_start($dnsbox, 0, 0, 0);
2395 set_next(undef, sub {
2399 my $text = $hostentry->get_text();
2404 $config->{fqdn} = $text;
2406 my $namere = "([a-zA-Z0-9]([a-zA-Z0-9\-]*[a-zA-Z0-9])?)";
2408 # Debian does not support purely numeric hostnames
2409 if ($text && $text =~ /^[0-9]+(?:\.|$)/) {
2410 display_message("Purely numeric hostnames are not allowed.");
2411 $hostentry->grab_focus();
2415 if ($text && $text =~ m/^(${namere}\.)*${namere}$/ && $text !~ m/.example.invalid$/ &&
2416 $text =~ m/^([^\.]+)\.(\S+)$/) {
2420 display_message("Hostname does not look like a fully qualified domain name.");
2421 $hostentry->grab_focus();
2427 $text = $ipconf_entry_addr->get_text();
2430 if ($text =~ m!^($IPV4RE)$!) {
2433 } elsif ($text =~ m!^($IPV6RE)$!) {
2437 display_message("IP address is not valid.");
2438 $ipconf_entry_addr->grab_focus();
2441 $config->{ipaddress} = $ipaddress;
2443 $text = $ipconf_entry_mask->get_text();
2446 if ($ipversion == 6 && ($text =~ m/^(\d+)$/) && $1 >= 8 && $1 <= 126) {
2448 } elsif ($ipversion == 4 && ($text =~ m/^(\d+)$/) && $1 >= 8 && $1 <= 32) {
2450 } elsif ($ipversion == 4 && defined($ipv4_mask_hash->{$text})) {
2451 # costs nothing to handle 255.x.y.z style masks, so continue to allow it
2452 $netmask = $ipv4_mask_hash->{$text};
2454 display_message("Netmask is not valid.");
2455 $ipconf_entry_mask->grab_focus();
2458 $cidr = "$ipaddress/$netmask";
2459 $config->{netmask} = $netmask;
2461 $text = $ipconf_entry_gw->get_text();
2464 if (($ipversion == 4) && ($text =~ m!^($IPV4RE)$!)) {
2466 } elsif (($ipversion == 6) && ($text =~ m!^($IPV6RE)$!)) {
2469 display_message("Gateway is not valid.");
2470 $ipconf_entry_gw->grab_focus();
2473 $config->{gateway} = $gateway;
2475 $text = $ipconf_entry_dns->get_text();
2478 if (($ipversion == 4) && ($text =~ m!^($IPV4RE)$!)) {
2480 } elsif (($ipversion == 6) && ($text =~ m!^($IPV6RE)$!)) {
2483 display_message("DNS server is not valid.");
2484 $ipconf_entry_dns->grab_focus();
2487 $config->{dnsserver} = $dnsserver;
2489 #print "TEST $ipaddress $netmask $gateway $dnsserver\n";
2495 $hostentry->grab_focus();
2498 sub create_ack_view {
2502 my $vbox = Gtk3::VBox->new(0, 0);
2503 $inbox->pack_start($vbox, 1, 0, 0);
2505 my $reboot_checkbox = Gtk3::CheckButton->new('Automatically reboot after successful installation');
2506 $reboot_checkbox->set_active(1);
2507 $reboot_checkbox->signal_connect ("toggled" => sub {
2509 $config_options->{autoreboot} = $cb->get_active();
2511 $vbox->pack_start($reboot_checkbox, 0, 0, 2);
2513 my $ack_template = "${proxmox_libdir}/html/ack_template.htm";
2514 my $ack_html = "${proxmox_libdir}/html/$setup->{product}/$steps[$step_number]->{html}";
2515 my $html_data = file_get_contents($ack_template);
2517 my %config_values = (
2518 __target_hd__ => join(' | ', @{$config_options->{target_hds}}),
2519 __target_fs__ => $config_options->{filesys},
2520 __country__ => $cmap->{country}->{$country}->{name},
2521 __timezone__ => $timezone,
2522 __keymap__ => $keymap,
2523 __mailto__ => $mailto,
2524 __interface__ => $ipconf->{ifaces}->{$ipconf->{selected}}->{name},
2525 __hostname__ => $hostname,
2526 __ip__ => $ipaddress,
2528 __netmask__ => $netmask,
2529 __gateway__ => $gateway,
2530 __dnsserver__ => $dnsserver,
2533 while (my ($k, $v) = each %config_values) {
2534 $html_data =~ s/$k/$v/g;
2537 write_config($html_data, $ack_html);
2543 set_next(undef, sub {
2545 create_extract_view();
2549 sub get_device_desc {
2550 my ($devname, $size, $model) = @_;
2552 if ($size && ($size > 0)) {
2553 $size = int($size/2048); # size in MiB, from 512B "sectors"
2555 my $text = "$devname (";
2556 if ($size >= 1024) {
2557 $size = $size/1024; # size in GiB
2558 if ($size >= 1024) {
2559 $size = $size/1024; # size in TiB
2560 $text .= sprintf("%.2f", $size) . "TiB";
2562 $text .= sprintf("%.2f", $size) . "GiB";
2565 $text .= "${size}MiB";
2568 $text .= ", $model" if $model;
2580 my ($cb, $kmap) = @_;
2585 my $kmaphash = $cmap->{kmaphash};
2586 foreach my $layout (sort keys %$kmaphash) {
2587 $def = $i if $kmaphash->{$layout} eq 'en-us';
2588 $ind = $i if $kmap && $kmaphash->{$layout} eq $kmap;
2592 my $val = $ind || $def || 0;
2594 if (!defined($kmap)) {
2595 $last_layout //= $val;
2596 } elsif (!defined($country_layout) || $country_layout != $val) {
2597 $last_layout = $country_layout = $val;
2599 $cb->set_active($last_layout);
2603 sub update_zonelist {
2604 my ($box, $cc) = @_;
2606 my $cczones = $cmap->{cczones};
2607 my $zones = $cmap->{zones};
2611 $sel = $lastzonecb->get_active_text();
2612 $box->remove ($lastzonecb);
2614 $sel = $timezone; # used once to select default
2617 my $cb = $lastzonecb = Gtk3::ComboBoxText->new();
2618 $cb->set_size_request(200, -1);
2620 $cb->signal_connect('changed' => sub {
2621 $timezone = $cb->get_active_text();
2625 if ($cc && defined ($cczones->{$cc})) {
2626 @za = keys %{$cczones->{$cc}};
2632 foreach my $zone (sort @za) {
2633 $ind = $i if $sel && $zone eq $sel;
2634 $cb->append_text($zone);
2638 $cb->set_active($ind || 0);
2641 $box->pack_start($cb, 0, 0, 0);
2644 sub create_password_view {
2648 my $vbox2 = Gtk3::VBox->new(0, 0);
2649 $inbox->pack_start($vbox2, 1, 0, 0);
2650 my $vbox = Gtk3::VBox->new(0, 0);
2651 $vbox2->pack_start($vbox, 0, 0, 10);
2653 my $hbox1 = Gtk3::HBox->new(0, 0);
2654 my $label = Gtk3::Label->new("Password");
2655 $label->set_size_request(150, -1);
2656 $label->set_alignment(1, 0.5);
2657 $hbox1->pack_start($label, 0, 0, 10);
2658 my $pwe1 = Gtk3::Entry->new();
2659 $pwe1->set_visibility(0);
2660 $pwe1->set_text($password) if $password;
2661 $pwe1->set_size_request(200, -1);
2662 $hbox1->pack_start($pwe1, 0, 0, 0);
2664 my $hbox2 = Gtk3::HBox->new(0, 0);
2665 $label = Gtk3::Label->new("Confirm");
2666 $label->set_size_request(150, -1);
2667 $label->set_alignment(1, 0.5);
2668 $hbox2->pack_start($label, 0, 0, 10);
2669 my $pwe2 = Gtk3::Entry->new();
2670 $pwe2->set_visibility(0);
2671 $pwe2->set_text($password) if $password;
2672 $pwe2->set_size_request(200, -1);
2673 $hbox2->pack_start($pwe2, 0, 0, 0);
2675 my $hbox3 = Gtk3::HBox->new(0, 0);
2676 $label = Gtk3::Label->new("Email");
2677 $label->set_size_request(150, -1);
2678 $label->set_alignment(1, 0.5);
2679 $hbox3->pack_start($label, 0, 0, 10);
2680 my $eme = Gtk3::Entry->new();
2681 $eme->set_size_request(200, -1);
2682 $eme->set_text($mailto);
2683 $hbox3->pack_start($eme, 0, 0, 0);
2686 $vbox->pack_start($hbox1, 0, 0, 5);
2687 $vbox->pack_start($hbox2, 0, 0, 5);
2688 $vbox->pack_start($hbox3, 0, 0, 15);
2694 set_next (undef, sub {
2696 my $t1 = $pwe1->get_text;
2697 my $t2 = $pwe2->get_text;
2699 if (length ($t1) < 5) {
2700 display_message("Password is too short.");
2701 $pwe1->grab_focus();
2706 display_message("Password does not match.");
2707 $pwe1->grab_focus();
2711 my $t3 = $eme->get_text;
2712 if ($t3 !~ m/^[\w\+\-\~]+(\.[\w\+\-\~]+)*@[a-zA-Z0-9\-]+(\.[a-zA-Z0-9\-]+)*$/) {
2713 display_message("Email does not look like a valid address" .
2714 " (user\@domain.tld)");
2719 if ($t3 eq 'mail@example.invalid') {
2720 display_message("Please enter a valid Email address");
2729 create_ipconf_view();
2732 $pwe1->grab_focus();
2737 sub create_country_view {
2741 my $countryhash = $cmap->{countryhash};
2742 my $ctr = $cmap->{country};
2744 my $vbox2 = Gtk3::VBox->new(0, 0);
2745 $inbox->pack_start($vbox2, 1, 0, 0);
2746 my $vbox = Gtk3::VBox->new(0, 0);
2747 $vbox2->pack_start($vbox, 0, 0, 10);
2749 my $w = Gtk3::Entry->new();
2750 $w->set_size_request(200, -1);
2752 my $c = Gtk3::EntryCompletion->new();
2753 $c->set_text_column(0);
2754 $c->set_minimum_key_length(0);
2755 $c->set_popup_set_width(1);
2756 $c->set_inline_completion(1);
2758 my $hbox2 = Gtk3::HBox->new(0, 0);
2759 my $label = Gtk3::Label->new("Time zone");
2760 $label->set_size_request(150, -1);
2761 $label->set_alignment(1, 0.5);
2762 $hbox2->pack_start($label, 0, 0, 10);
2763 update_zonelist ($hbox2);
2765 my $hbox3 = Gtk3::HBox->new(0, 0);
2766 $label = Gtk3::Label->new("Keyboard Layout");
2767 $label->set_size_request(150, -1);
2768 $label->set_alignment(1, 0.5);
2769 $hbox3->pack_start($label, 0, 0, 10);
2771 my $kmapcb = Gtk3::ComboBoxText->new();
2772 $kmapcb->set_size_request (200, -1);
2773 foreach my $layout (sort keys %{$cmap->{kmaphash}}) {
2774 $kmapcb->append_text ($layout);
2777 update_layout($kmapcb);
2778 $hbox3->pack_start ($kmapcb, 0, 0, 0);
2780 $kmapcb->signal_connect ('changed' => sub {
2781 my $sel = $kmapcb->get_active_text();
2782 $last_layout = $kmapcb->get_active();
2783 if (my $kmap = $cmap->{kmaphash}->{$sel}) {
2784 my $xkmap = $cmap->{kmap}->{$kmap}->{x11};
2785 my $xvar = $cmap->{kmap}->{$kmap}->{x11var};
2788 return if (defined($installer_kmap) && $installer_kmap eq $kmap);
2790 $installer_kmap = $keymap;
2792 if (! $opt_testmode) {
2793 syscmd ("setxkbmap $xkmap $xvar");
2795 my $kbd_config = qq{
2800 $kbd_config =~ s/^\s+//gm;
2802 run_in_background
( sub {
2803 write_config
($kbd_config, '/etc/default/keyboard');
2810 $w->signal_connect ('changed' => sub {
2811 my ($entry, $event) = @_;
2812 my $text = $entry->get_text;
2814 if (my $cc = $countryhash->{lc($text)}) {
2815 update_zonelist
($hbox2, $cc);
2816 my $kmap = $ctr->{$cc}->{kmap
} || 'en-us';
2817 update_layout
($kmapcb, $kmap);
2821 $w->signal_connect (key_press_event
=> sub {
2822 my ($entry, $event) = @_;
2823 my $text = $entry->get_text;
2825 my $val = $event->get_keyval;
2827 if ($val == Gtk3
::Gdk
::KEY_Tab
) {
2828 my $cc = $countryhash->{lc($text)};
2835 $compl = $ctr->{$cc}->{name
};
2837 foreach my $cc (keys %$ctr) {
2838 my $ct = $ctr->{$cc}->{name
};
2839 if ($ct =~ m/^\Q$text\E.*$/i) {
2848 $entry->set_text($compl);
2853 print chr(7); # beep ?
2858 my $buf = $w->get_buffer();
2859 $buf->insert_text(-1, '', -1); # popup selection
2867 my $ls = Gtk3
::ListStore-
>new('Glib::String');
2868 foreach my $cc (sort {$ctr->{$a}->{name
} cmp $ctr->{$b}->{name
} } keys %$ctr) {
2869 my $iter = $ls->append();
2870 $ls->set ($iter, 0, $ctr->{$cc}->{name
});
2872 $c->set_model ($ls);
2874 $w->set_completion ($c);
2876 my $hbox = Gtk3
::HBox-
>new(0, 0);
2878 $label = Gtk3
::Label-
>new("Country");
2879 $label->set_alignment(1, 0.5);
2880 $label->set_size_request(150, -1);
2881 $hbox->pack_start($label, 0, 0, 10);
2882 $hbox->pack_start($w, 0, 0, 0);
2884 $vbox->pack_start($hbox, 0, 0, 5);
2885 $vbox->pack_start($hbox2, 0, 0, 5);
2886 $vbox->pack_start($hbox3, 0, 0, 5);
2888 if ($country && $ctr->{$country}) {
2889 $w->set_text ($ctr->{$country}->{name
});
2895 set_next
(undef, sub {
2897 my $text = $w->get_text;
2899 if (my $cc = $countryhash->{lc($text)}) {
2902 create_password_view
();
2905 display_message
("Please select a country first.");
2913 my $target_hd_combo;
2914 my $target_hd_label;
2916 my $hdoption_first_setup = 1;
2918 my $create_basic_grid = sub {
2919 my $grid = Gtk3
::Grid-
>new();
2920 $grid->set_visible(1);
2921 $grid->set_column_spacing(10);
2922 $grid->set_row_spacing(10);
2923 $grid->set_hexpand(1);
2925 $grid->set_margin_start(10);
2926 $grid->set_margin_end(20);
2927 $grid->set_margin_top(5);
2928 $grid->set_margin_bottom(5);
2933 my $create_label_widget_grid = sub {
2934 my ($labeled_widgets) = @_;
2936 my $grid = &$create_basic_grid();
2939 for (my $i = 0; $i < @$labeled_widgets; $i += 2) {
2940 my $widget = @$labeled_widgets[$i+1];
2941 my $label = Gtk3
::Label-
>new(@$labeled_widgets[$i]);
2942 $label->set_visible(1);
2943 $label->set_alignment (1, 0.5);
2944 $grid->attach($label, 0, $row, 1, 1);
2945 $widget->set_visible(1);
2946 $grid->attach($widget, 1, $row, 1, 1);
2953 # only relevant for raid with its multipl diskX to diskY mappings.
2954 my $get_selected_hdsize = sub {
2956 return $hdsize if defined($hdsize);
2958 # compute the smallest disk size of the actually selected disks
2959 my $hd_count = scalar(@$hds);
2960 for (my $i = 0; $i < $hd_count; $i++) {
2961 my $cur_hd = $config_options->{"disksel$i"} // next;
2962 my $disksize = int(@$cur_hd[2] / (2 * 1024 * 1024.0)); # size in GB
2963 $hdsize //= $disksize;
2964 $hdsize = $disksize if $disksize < $hdsize;
2966 return $hdsize // 0; # fall back to zero, e.g., if none is selected hdsize cannot be any size
2969 my sub update_hdsize_adjustment
{
2970 my ($adjustment, $hdsize) = @_;
2972 $hdsize = $get_selected_hdsize->($hdsize);
2973 # expect that lower = 0 and step increments = 1 still are valid
2974 $adjustment->set_upper($hdsize + 1);
2975 $adjustment->set_value($hdsize);
2978 my sub create_hdsize_adjustment
{
2980 $hdsize = $get_selected_hdsize->($hdsize);
2981 # params are: initial value, lower, upper, step increment, page increment, page size
2982 return Gtk3
::Adjustment-
>new($config_options->{hdsize
} || $hdsize, 0, $hdsize+1, 1, 1, 1);
2985 my sub get_hdsize_spin_button
{
2988 my $hdsize_entry_buffer = Gtk3
::EntryBuffer-
>new(undef, 1);
2989 my $hdsize_size_adj = create_hdsize_adjustment
($hdsize);
2991 my $spinbutton_hdsize = Gtk3
::SpinButton-
>new($hdsize_size_adj, 1, 1);
2992 $spinbutton_hdsize->set_buffer($hdsize_entry_buffer);
2993 $spinbutton_hdsize->set_adjustment($hdsize_size_adj);
2994 $spinbutton_hdsize->set_tooltip_text("only use specified size (GB) of the harddisk (rest left unpartitioned)");
2995 return $spinbutton_hdsize;
2998 my $create_raid_disk_grid = sub {
2999 my ($hdsize_buttons) = @_;
3001 my $hd_count = scalar(@$hds);
3002 my $disk_labeled_widgets = [];
3003 for (my $i = 0; $i < $hd_count; $i++) {
3004 my $disk_selector = Gtk3
::ComboBoxText-
>new();
3005 $disk_selector->append_text("-- do not use --");
3006 $disk_selector->set_active(0);
3007 $disk_selector->set_visible(1);
3009 foreach my $hd (@$hds) {
3010 my ($disk, $devname, $size, $model, $logical_bsize) = @$hd;
3011 $disk_selector->append_text(get_device_desc
($devname, $size, $model));
3014 $disk_selector->{pve_disk_id
} = $i;
3015 $disk_selector->signal_connect(changed
=> sub {
3017 my $diskid = $w->{pve_disk_id
};
3018 my $a = $w->get_active - 1;
3019 $config_options->{"disksel${diskid}"} = ($a >= 0) ?
$hds->[$a] : undef;
3020 for my $btn (@$hdsize_buttons) {
3021 update_hdsize_adjustment
($btn->get_adjustment());
3025 if ($hdoption_first_setup) {
3026 $disk_selector->set_active ($i+1) if $hds->[$i];
3029 if (my $cur_hd = $config_options->{"disksel$i"}) {
3030 foreach my $hd (@$hds) {
3031 if (@$hd[1] eq @$cur_hd[1]) {
3032 $disk_selector->set_active($hdind+1);
3040 push @$disk_labeled_widgets, "Harddisk $i", $disk_selector;
3043 my $clear_all_button = Gtk3
::Button-
>new('_Deselect All');
3044 if ($hd_count > 3) {
3045 $clear_all_button->signal_connect('clicked', sub {
3047 for my $disk_selector (@$disk_labeled_widgets) {
3048 $disk_selector->set_active(0) if $is_widget;
3052 $clear_all_button->set_visible(1);
3055 my $scrolled_window = Gtk3
::ScrolledWindow-
>new();
3056 $scrolled_window->set_hexpand(1);
3057 $scrolled_window->set_propagate_natural_height(1) if $hd_count > 4;
3059 my $diskgrid = $create_label_widget_grid->($disk_labeled_widgets);
3061 $scrolled_window->add($diskgrid);
3062 $scrolled_window->set_policy('never', 'automatic');
3063 $scrolled_window->set_visible(1);
3064 $scrolled_window->set_min_content_height(190);
3066 my $vbox = Gtk3
::Box-
>new('vertical', 0);
3067 $vbox->pack_start($scrolled_window, 1, 1, 10);
3069 my $hbox = Gtk3
::Box-
>new('horizontal', 0);
3070 $hbox->pack_end($clear_all_button, 0, 0, 20);
3071 $hbox->set_visible(1);
3072 $vbox->pack_end($hbox, 0, 0, 0);
3077 my $create_raid_advanced_grid = sub {
3078 my ($hdsize_btn) = @_;
3079 my $labeled_widgets = [];
3080 my $spinbutton_ashift = Gtk3
::SpinButton-
>new_with_range(9, 13, 1);
3081 $spinbutton_ashift->set_tooltip_text("zpool ashift property (pool sector size, default 2^12)");
3082 $spinbutton_ashift->signal_connect ("value-changed" => sub {
3084 $config_options->{ashift
} = $w->get_value_as_int();
3086 $config_options->{ashift
} = 12 if ! defined($config_options->{ashift
});
3087 $spinbutton_ashift->set_value($config_options->{ashift
});
3088 push @$labeled_widgets, "ashift";
3089 push @$labeled_widgets, $spinbutton_ashift;
3091 my $combo_compress = Gtk3
::ComboBoxText-
>new();
3092 $combo_compress->set_tooltip_text("zfs compression algorithm for rpool dataset");
3093 my $comp_opts = ["on","off","lzjb","lz4", "lze", "gzip", "zstd"];
3094 foreach my $opt (@$comp_opts) {
3095 $combo_compress->append($opt, $opt);
3097 $config_options->{compress
} = "on" if !defined($config_options->{compress
});
3098 $combo_compress->set_active_id($config_options->{compress
});
3099 $combo_compress->signal_connect (changed
=> sub {
3101 $config_options->{compress
} = $w->get_active_text();
3103 push @$labeled_widgets, "compress";
3104 push @$labeled_widgets, $combo_compress;
3106 my $combo_checksum = Gtk3
::ComboBoxText-
>new();
3107 $combo_checksum->set_tooltip_text("zfs checksum algorithm for rpool dataset");
3108 my $csum_opts = ["on", "off","fletcher2", "fletcher4", "sha256"];
3109 foreach my $opt (@$csum_opts) {
3110 $combo_checksum->append($opt, $opt);
3112 $config_options->{checksum
} = "on" if !($config_options->{checksum
});
3113 $combo_checksum->set_active_id($config_options->{checksum
});
3114 $combo_checksum->signal_connect (changed
=> sub {
3116 $config_options->{checksum
} = $w->get_active_text();
3118 push @$labeled_widgets, "checksum";
3119 push @$labeled_widgets, $combo_checksum;
3121 my $spinbutton_copies = Gtk3
::SpinButton-
>new_with_range(1,3,1);
3122 $spinbutton_copies->set_tooltip_text("zfs copies property for rpool dataset (in addition to RAID redundancy!)");
3123 $spinbutton_copies->signal_connect ("value-changed" => sub {
3125 $config_options->{copies
} = $w->get_value_as_int();
3127 $config_options->{copies
} = 1 if !defined($config_options->{copies
});
3128 $spinbutton_copies->set_value($config_options->{copies
});
3129 push @$labeled_widgets, "copies", $spinbutton_copies;
3131 push @$labeled_widgets, "hdsize", $hdsize_btn;
3132 return $create_label_widget_grid->($labeled_widgets);;
3135 my $create_btrfs_raid_advanced_grid = sub {
3136 my ($hdsize_btn) = @_;
3137 my $labeled_widgets = [];
3138 push @$labeled_widgets, "hdsize", $hdsize_btn;
3139 return $create_label_widget_grid->($labeled_widgets);;
3142 sub create_hdoption_view
{
3143 my $dialog = Gtk3
::Dialog-
>new();
3145 $dialog->set_title("Harddisk options");
3147 $dialog->add_button("_OK", 1);
3149 my $contarea = $dialog->get_content_area();
3151 my $hbox2 = Gtk3
::Box-
>new('horizontal', 0);
3152 $contarea->pack_start($hbox2, 1, 1, 5);
3154 my $grid = Gtk3
::Grid-
>new();
3155 $grid->set_column_spacing(10);
3156 $grid->set_row_spacing(10);
3158 $hbox2->pack_start($grid, 1, 0, 5);
3163 my $label0 = Gtk3
::Label-
>new("Filesystem");
3164 $label0->set_alignment (1, 0.5);
3165 $grid->attach($label0, 0, $row, 1, 1);
3167 my $fstypecb = Gtk3
::ComboBoxText-
>new();
3178 push @$fstype, 'btrfs (RAID0)', 'btrfs (RAID1)', 'btrfs (RAID10)'
3179 if $setup->{enable_btrfs
};
3182 foreach my $tmp (@$fstype) {
3183 $fstypecb->append_text($tmp);
3184 $fstypecb->set_active ($tcount) if $config_options->{filesys
} eq $tmp;
3188 $grid->attach($fstypecb, 1, $row, 1, 1);
3194 my $sep = Gtk3
::HSeparator-
>new();
3195 $sep->set_visible(1);
3196 $grid->attach($sep, 0, $row, 2, 1);
3199 my $hw_raid_note = Gtk3
::Label-
>new(""); # text will be set below, before making it visible
3200 $hw_raid_note->set_line_wrap(1);
3201 $hw_raid_note->set_max_width_chars(30);
3202 $hw_raid_note->set_visible(0);
3203 $grid->attach($hw_raid_note, 0, $row++, 2, 1);
3205 my $hdsize_labeled_widgets = [];
3209 if ( -b
$target_hd) {
3210 $hdsize = int(hd_size
($target_hd) / (1024 * 1024.0)); # size in GB
3211 } elsif ($target_hd) {
3212 $hdsize = int((-s
$target_hd) / (1024 * 1024 * 1024.0));
3215 my $spinbutton_hdsize_nonraid = get_hdsize_spin_button
($hdsize);
3216 push @$hdsize_labeled_widgets, "hdsize", $spinbutton_hdsize_nonraid;
3217 my $spinbutton_hdsize = $spinbutton_hdsize_nonraid;
3219 my $entry_swapsize = Gtk3
::Entry-
>new();
3220 $entry_swapsize->set_tooltip_text("maximum SWAP size (GB)");
3221 $entry_swapsize->signal_connect (key_press_event
=> \
&check_float
);
3222 $entry_swapsize->set_text($config_options->{swapsize
}) if defined($config_options->{swapsize
});
3223 push @$hdsize_labeled_widgets, "swapsize", $entry_swapsize;
3225 my $entry_maxroot = Gtk3
::Entry-
>new();
3226 if ($setup->{product
} eq 'pve') {
3227 $entry_maxroot->set_tooltip_text("maximum size (GB) for LVM root volume");
3228 $entry_maxroot->signal_connect (key_press_event
=> \
&check_float
);
3229 $entry_maxroot->set_text($config_options->{maxroot
}) if $config_options->{maxroot
};
3230 push @$hdsize_labeled_widgets, "maxroot", $entry_maxroot;
3233 my $entry_minfree = Gtk3
::Entry-
>new();
3234 $entry_minfree->set_tooltip_text("minimum free LVM space (GB, required for LVM snapshots)");
3235 $entry_minfree->signal_connect (key_press_event
=> \
&check_float
);
3236 $entry_minfree->set_text($config_options->{minfree
}) if defined($config_options->{minfree
});
3237 push @$hdsize_labeled_widgets, "minfree", $entry_minfree;
3240 if ($setup->{product
} eq 'pve') {
3241 $entry_maxvz = Gtk3
::Entry-
>new();
3242 $entry_maxvz->set_tooltip_text("maximum size (GB) for LVM data volume");
3243 $entry_maxvz->signal_connect (key_press_event
=> \
&check_float
);
3244 $entry_maxvz->set_text($config_options->{maxvz
}) if defined($config_options->{maxvz
});
3245 push @$hdsize_labeled_widgets, "maxvz", $entry_maxvz;
3248 my $spinbutton_hdsize_zfs = get_hdsize_spin_button
($hdsize);
3249 my $spinbutton_hdsize_btrfs = get_hdsize_spin_button
($hdsize);
3250 my $hdsize_buttons = [ $spinbutton_hdsize_zfs, $spinbutton_hdsize_btrfs ];
3251 my $options_stack = Gtk3
::Stack-
>new();
3252 $options_stack->set_visible(1);
3253 $options_stack->set_hexpand(1);
3254 $options_stack->set_vexpand(1);
3255 $options_stack->add_titled(&$create_raid_disk_grid($hdsize_buttons), "raiddisk", "Disk Setup");
3256 $options_stack->add_titled(&$create_label_widget_grid($hdsize_labeled_widgets), "hdsize", "Size Options");
3257 $options_stack->add_titled(&$create_raid_advanced_grid($spinbutton_hdsize_zfs), "raidzfsadvanced", "Advanced Options");
3258 $options_stack->add_titled(&$create_btrfs_raid_advanced_grid($spinbutton_hdsize_btrfs), "raidbtrfsadvanced", "Advanced Options");
3259 $options_stack->set_visible_child_name("raiddisk");
3260 my $options_stack_switcher = Gtk3
::StackSwitcher-
>new();
3261 $options_stack_switcher->set_halign('center');
3262 $options_stack_switcher->set_stack($options_stack);
3263 $grid->attach($options_stack_switcher, 0, $row, 2, 1);
3265 $grid->attach($options_stack, 0, $row, 2, 1);
3268 $hdoption_first_setup = 0;
3270 my $switch_view = sub {
3271 my $raid = $config_options->{filesys
} =~ m/zfs|btrfs/;
3272 my $is_zfs = $config_options->{filesys
} =~ m/zfs/;
3274 $target_hd_combo->set_visible(!$raid);
3275 $options_stack->get_child_by_name("hdsize")->set_visible(!$raid);
3276 $options_stack->get_child_by_name("raiddisk")->set_visible($raid);
3279 my $msg = "<b>Note</b>: " . ($is_zfs
3280 ?
"ZFS is not compatible with hardware RAID controllers, for details see the documentation."
3281 : "BTRFS integration in $setup->{fullname} is a technology preview!"
3283 $hw_raid_note->set_markup($msg);
3285 $hw_raid_note->set_visible($raid);
3286 $options_stack_switcher->set_visible($raid);
3287 $options_stack->get_child_by_name("raidzfsadvanced")->set_visible($is_zfs);
3288 $options_stack->get_child_by_name("raidbtrfsadvanced")->set_visible(!$is_zfs);
3290 $target_hd_label->set_text("Target: $config_options->{filesys} ");
3291 $options_stack->set_visible_child_name("raiddisk");
3293 $target_hd_label->set_text("Target Harddisk: ");
3297 $spinbutton_hdsize = $is_zfs ?
$spinbutton_hdsize_zfs : $spinbutton_hdsize_btrfs;
3299 $spinbutton_hdsize = $spinbutton_hdsize_nonraid;
3302 my (undef, $pref_width) = $dialog->get_preferred_width();
3303 my (undef, $pref_height) = $dialog->get_preferred_height();
3304 $pref_height = 750 if $pref_height > 750;
3305 $dialog->resize($pref_width, $pref_height);
3310 $fstypecb->signal_connect (changed
=> sub {
3311 $config_options->{filesys
} = $fstypecb->get_active_text();
3315 my $sep2 = Gtk3
::HSeparator-
>new();
3316 $sep2->set_visible(1);
3317 $contarea->pack_end($sep2, 1, 1, 10);
3323 my $get_float = sub {
3326 my $text = $entry->get_text();
3327 return undef if !defined($text);
3332 return undef if $text !~ m/^\d+(\.\d+)?$/;
3339 if (($tmp = &$get_float($spinbutton_hdsize)) && ($tmp != $hdsize)) {
3340 $config_options->{hdsize
} = $tmp;
3342 delete $config_options->{hdsize
};
3345 if (defined($tmp = &$get_float($entry_swapsize))) {
3346 $config_options->{swapsize
} = $tmp;
3348 delete $config_options->{swapsize
};
3351 if (defined($tmp = &$get_float($entry_maxroot))) {
3352 $config_options->{maxroot
} = $tmp;
3354 delete $config_options->{maxroot
};
3357 if (defined($tmp = &$get_float($entry_minfree))) {
3358 $config_options->{minfree
} = $tmp;
3360 delete $config_options->{minfree
};
3363 if ($entry_maxvz && defined($tmp = &$get_float($entry_maxvz))) {
3364 $config_options->{maxvz
} = $tmp;
3366 delete $config_options->{maxvz
};
3372 my $get_raid_devlist = sub {
3374 my $dev_name_hash = {};
3377 for (my $i = 0; $i < @$hds; $i++) {
3378 if (my $hd = $config_options->{"disksel$i"}) {
3379 my ($disk, $devname, $size, $model, $logical_bsize) = @$hd;
3380 die "device '$devname' is used more than once\n"
3381 if $dev_name_hash->{$devname};
3382 $dev_name_hash->{$devname} = $hd;
3383 push @$devlist, $hd;
3390 sub zfs_mirror_size_check
{
3391 my ($expected, $actual) = @_;
3393 die "mirrored disks must have same size\n"
3394 if abs($expected - $actual) > $expected / 10;
3397 sub legacy_bios_4k_check
{
3399 die "Booting from 4kn drive in legacy BIOS mode is not supported.\n"
3400 if (($boot_type ne 'efi') && ($lbs == 4096));
3403 sub get_zfs_raid_setup
{
3404 my $filesys = $config_options->{filesys
};
3406 my $devlist = &$get_raid_devlist();
3408 my $diskcount = scalar(@$devlist);
3409 die "$filesys needs at least one device\n" if $diskcount < 1;
3412 if ($filesys eq 'zfs (RAID0)') {
3413 foreach my $hd (@$devlist) {
3414 legacy_bios_4k_check
(@$hd[4]);
3417 } elsif ($filesys eq 'zfs (RAID1)') {
3418 die "zfs (RAID1) needs at least 2 device\n" if $diskcount < 2;
3420 my $hd = @$devlist[0];
3421 my $expected_size = @$hd[2]; # all disks need approximately same size
3422 foreach my $hd (@$devlist) {
3423 zfs_mirror_size_check
($expected_size, @$hd[2]);
3424 legacy_bios_4k_check
(@$hd[4]);
3427 } elsif ($filesys eq 'zfs (RAID10)') {
3428 die "zfs (RAID10) needs at least 4 device\n" if $diskcount < 4;
3429 die "zfs (RAID10) needs an even number of devices\n" if $diskcount & 1;
3431 for (my $i = 0; $i < $diskcount; $i+=2) {
3432 my $hd1 = @$devlist[$i];
3433 my $hd2 = @$devlist[$i+1];
3434 zfs_mirror_size_check
(@$hd1[2], @$hd2[2]); # pairs need approximately same size
3435 legacy_bios_4k_check
(@$hd1[4]);
3436 legacy_bios_4k_check
(@$hd2[4]);
3437 $cmd .= ' mirror ' . @$hd1[1] . ' ' . @$hd2[1];
3440 } elsif ($filesys =~ m/^zfs \(RAIDZ-([123])\)$/) {
3442 my $mindisks = 2 + $level;
3443 die "zfs (RAIDZ-$level) needs at least $mindisks devices\n" if scalar(@$devlist) < $mindisks;
3444 my $hd = @$devlist[0];
3445 my $expected_size = @$hd[2]; # all disks need approximately same size
3446 $cmd .= " raidz$level";
3447 foreach my $hd (@$devlist) {
3448 zfs_mirror_size_check
($expected_size, @$hd[2]);
3449 legacy_bios_4k_check
(@$hd[4]);
3453 die "unknown zfs mode '$filesys'\n";
3456 return ($devlist, $cmd);
3459 sub get_btrfs_raid_setup
{
3461 my $filesys = $config_options->{filesys
};
3463 my $devlist = &$get_raid_devlist();
3465 my $diskcount = scalar(@$devlist);
3466 die "$filesys needs at least one device\n" if $diskcount < 1;
3470 if ($diskcount == 1) {
3473 if ($filesys eq 'btrfs (RAID0)') {
3475 } elsif ($filesys eq 'btrfs (RAID1)') {
3476 die "btrfs (RAID1) needs at least 2 device\n" if $diskcount < 2;
3478 } elsif ($filesys eq 'btrfs (RAID10)') {
3479 die "btrfs (RAID10) needs at least 4 device\n" if $diskcount < 4;
3482 die "unknown btrfs mode '$filesys'\n";
3486 return ($devlist, $mode);
3489 my $last_hd_selected = 0;
3490 sub create_hdsel_view
{
3492 $prev_btn->set_sensitive(1); # enable previous button at this point
3496 my $vbox = Gtk3
::VBox-
>new(0, 0);
3497 $inbox->pack_start($vbox, 1, 0, 0);
3498 my $hbox = Gtk3
::HBox-
>new(0, 0);
3499 $vbox->pack_start($hbox, 0, 0, 10);
3501 my ($disk, $devname, $size, $model, $logical_bsize) = @{@$hds[0]};
3502 $target_hd = $devname if !defined($target_hd);
3504 $target_hd_label = Gtk3
::Label-
>new("Target Harddisk: ");
3505 $hbox->pack_start($target_hd_label, 0, 0, 0);
3507 $target_hd_combo = Gtk3
::ComboBoxText-
>new();
3509 foreach my $hd (@$hds) {
3510 ($disk, $devname, $size, $model, $logical_bsize) = @$hd;
3511 $target_hd_combo->append_text(get_device_desc
($devname, $size, $model));
3514 my $raid = $config_options->{filesys
} =~ m/zfs|btrfs/;
3516 $target_hd_label->set_text("Target: $config_options->{filesys} ");
3517 $target_hd_combo->set_visible(0);
3518 $target_hd_combo->set_no_show_all(1);
3520 $target_hd_combo->set_active($last_hd_selected);
3521 $target_hd_combo->signal_connect(changed
=> sub {
3522 $a = shift-
>get_active;
3523 my ($disk, $devname) = @{@$hds[$a]};
3524 $last_hd_selected = $a;
3525 $target_hd = $devname;
3528 $hbox->pack_start($target_hd_combo, 0, 0, 10);
3530 my $options = Gtk3
::Button-
>new('_Options');
3531 $options->signal_connect (clicked
=> \
&create_hdoption_view
);
3532 $hbox->pack_start ($options, 0, 0, 0);
3539 set_next
(undef, sub {
3541 if ($config_options->{filesys
} =~ m/zfs/) {
3542 my ($devlist) = eval { get_zfs_raid_setup
() };
3544 display_message
("Warning: $err\nPlease fix ZFS setup first.");
3547 $config_options->{target_hds
} = [ map { $_->[1] } @$devlist ];
3548 } elsif ($config_options->{filesys
} =~ m/btrfs/) {
3549 my ($devlist) = eval { get_btrfs_raid_setup
() };
3551 display_message
("Warning: $err\nPlease fix BTRFS setup first.");
3554 $config_options->{target_hds
} = [ map { $_->[1] } @$devlist ];
3556 eval { legacy_bios_4k_check
(logical_blocksize
($target_hd)) };
3558 display_message
("Warning: $err\n");
3561 $config_options->{target_hds
} = [ $target_hd ];
3565 create_country_view
();
3569 sub create_extract_view
{
3575 $next->set_sensitive(0);
3576 $prev_btn->set_sensitive(0);
3579 my $vbox = Gtk3
::VBox-
>new(0, 0);
3580 $inbox->pack_start ($vbox, 1, 0, 0);
3581 my $hbox = Gtk3
::HBox-
>new(0, 0);
3582 $vbox->pack_start ($hbox, 0, 0, 10);
3584 my $vbox2 = Gtk3
::VBox-
>new(0, 0);
3585 $hbox->pack_start ($vbox2, 0, 0, 0);
3587 $progress_status = Gtk3
::Label-
>new('');
3588 $vbox2->pack_start ($progress_status, 1, 1, 0);
3590 $progress = Gtk3
::ProgressBar-
>new;
3591 $progress->set_show_text(1);
3592 $progress->set_size_request (600, -1);
3594 $vbox2->pack_start($progress, 0, 0, 0);
3598 my $tdir = $opt_testmode ?
"target" : "/target";
3600 my $base = "${proxmox_cddir}/$setup->{product}-base.squashfs";
3602 eval { extract_data
($base, $tdir); };
3605 $next->set_sensitive(1);
3607 set_next
("_Reboot", sub { exit (0); } );
3610 display_html
("fail.htm");
3611 display_error
($err);
3614 display_html
("success.htm");
3616 if ($config_options->{autoreboot
}) {
3617 Glib
::Timeout-
>add(1000, sub {
3618 if ($autoreboot_seconds > 0) {
3619 $autoreboot_seconds--;
3620 display_html
("success.htm");
3629 sub create_intro_view
{
3631 $prev_btn->set_sensitive(0);
3635 if (int($total_memory) < 1024) {
3636 display_error
("Less than 1 GiB of usable memory detected, installation will probably fail.\n\n".
3637 "See 'System Requirements' in the $setup->{fullname} documentation.");
3640 if ($setup->{product
} eq 'pve') {
3642 my $cpuinfo = file_get_contents
('/proc/cpuinfo');
3643 if ($cpuinfo && !($cpuinfo =~ /^flags\s*:.*(vmx|svm)/m)) {
3644 display_error
("No support for KVM virtualization detected.\n\n" .
3645 "Check BIOS settings for Intel VT / AMD-V / SVM.")
3653 set_next
("I a_gree", \
&create_hdsel_view
);
3656 $ipconf = get_ip_config
();
3658 $country = detect_country
() if $ipconf->{default} || $opt_testmode;
3660 # read country, kmap and timezone infos
3661 $cmap = read_cmap
();
3663 if (!defined($cmap->{country
}->{$country})) {
3664 print $logfd "ignoring detected country '$country', invalid or unknown\n";
3668 create_main_window
();
3670 my $initial_error = 0;
3672 if (!defined ($hds) || (scalar (@$hds) <= 0)) {
3673 print "no hardisks found\n";
3675 display_html
("nohds.htm");
3676 set_next
("Reboot", sub { exit(0); } );
3678 foreach my $hd (@$hds) {
3679 my ($disk, $devname) = @$hd;
3680 next if $devname =~ m
|^/dev/md\d
+$|;
3681 print "found Disk$disk N:$devname\n";
3685 if (!$initial_error && (scalar keys %{ $ipconf->{ifaces
} } == 0)) {
3686 print "no network interfaces found\n";
3688 display_html
("nonics.htm");
3689 set_next
("Reboot", sub { exit(0); } );
3692 create_intro_view
() if !$initial_error;
3696 # reap left over zombie processes
3697 while ((my $child = waitpid(-1, POSIX
::WNOHANG
)) > 0) {
3698 print "reaped child $child\n";