qapi/ui.json

   1 # -*- Mode: Python -*-
   2 #
   3
   4 ##
   5 # = Remote desktop
   6 ##
   7
   8 { 'include': 'sockets.json' }
   9
  10 ##
  11 # @set_password:
  12 #
  13 # Sets the password of a remote display session.
  14 #
  15 # @protocol: `vnc' to modify the VNC server password
  16 #            `spice' to modify the Spice server password
  17 #
  18 # @password: the new password
  19 #
  20 # @connected: how to handle existing clients when changing the
  21 #                       password.  If nothing is specified, defaults to `keep'
  22 #                       `fail' to fail the command if clients are connected
  23 #                       `disconnect' to disconnect existing clients
  24 #                       `keep' to maintain existing clients
  25 #
  26 # Returns: Nothing on success
  27 #          If Spice is not enabled, DeviceNotFound
  28 #
  29 # Since: 0.14.0
  30 #
  31 # Example:
  32 #
  33 # -> { "execute": "set_password", "arguments": { "protocol": "vnc",
  34 #                                                "password": "secret" } }
  35 # <- { "return": {} }
  36 #
  37 ##
  38 { 'command': 'set_password',
  39   'data': {'protocol': 'str', 'password': 'str', '*connected': 'str'} }
  40
  41 ##
  42 # @expire_password:
  43 #
  44 # Expire the password of a remote display server.
  45 #
  46 # @protocol: the name of the remote display protocol `vnc' or `spice'
  47 #
  48 # @time: when to expire the password.
  49 #        `now' to expire the password immediately
  50 #        `never' to cancel password expiration
  51 #        `+INT' where INT is the number of seconds from now (integer)
  52 #        `INT' where INT is the absolute time in seconds
  53 #
  54 # Returns: Nothing on success
  55 #          If @protocol is `spice' and Spice is not active, DeviceNotFound
  56 #
  57 # Since: 0.14.0
  58 #
  59 # Notes: Time is relative to the server and currently there is no way to
  60 #        coordinate server time with client time.  It is not recommended to
  61 #        use the absolute time version of the @time parameter unless you're
  62 #        sure you are on the same machine as the QEMU instance.
  63 #
  64 # Example:
  65 #
  66 # -> { "execute": "expire_password", "arguments": { "protocol": "vnc",
  67 #                                                   "time": "+60" } }
  68 # <- { "return": {} }
  69 #
  70 ##
  71 { 'command': 'expire_password', 'data': {'protocol': 'str', 'time': 'str'} }
  72
  73 ##
  74 # @screendump:
  75 #
  76 # Write a PPM of the VGA screen to a file.
  77 #
  78 # @filename: the path of a new PPM file to store the image
  79 #
  80 # @device: ID of the display device that should be dumped. If this parameter
  81 #          is missing, the primary display will be used. (Since 2.12)
  82 #
  83 # @head: head to use in case the device supports multiple heads. If this
  84 #        parameter is missing, head #0 will be used. Also note that the head
  85 #        can only be specified in conjunction with the device ID. (Since 2.12)
  86 #
  87 # Returns: Nothing on success
  88 #
  89 # Since: 0.14.0
  90 #
  91 # Example:
  92 #
  93 # -> { "execute": "screendump",
  94 #      "arguments": { "filename": "/tmp/image" } }
  95 # <- { "return": {} }
  96 #
  97 ##
  98 { 'command': 'screendump',
  99   'data': {'filename': 'str', '*device': 'str', '*head': 'int'} }
 100
 101 ##
 102 # == Spice
 103 ##
 104
 105 ##
 106 # @SpiceBasicInfo:
 107 #
 108 # The basic information for SPICE network connection
 109 #
 110 # @host: IP address
 111 #
 112 # @port: port number
 113 #
 114 # @family: address family
 115 #
 116 # Since: 2.1
 117 ##
 118 { 'struct': 'SpiceBasicInfo',
 119   'data': { 'host': 'str',
 120             'port': 'str',
 121             'family': 'NetworkAddressFamily' },
 122   'if': 'defined(CONFIG_SPICE)' }
 123
 124 ##
 125 # @SpiceServerInfo:
 126 #
 127 # Information about a SPICE server
 128 #
 129 # @auth: authentication method
 130 #
 131 # Since: 2.1
 132 ##
 133 { 'struct': 'SpiceServerInfo',
 134   'base': 'SpiceBasicInfo',
 135   'data': { '*auth': 'str' },
 136   'if': 'defined(CONFIG_SPICE)' }
 137
 138 ##
 139 # @SpiceChannel:
 140 #
 141 # Information about a SPICE client channel.
 142 #
 143 # @connection-id: SPICE connection id number.  All channels with the same id
 144 #                 belong to the same SPICE session.
 145 #
 146 # @channel-type: SPICE channel type number.  "1" is the main control
 147 #                channel, filter for this one if you want to track spice
 148 #                sessions only
 149 #
 150 # @channel-id: SPICE channel ID number.  Usually "0", might be different when
 151 #              multiple channels of the same type exist, such as multiple
 152 #              display channels in a multihead setup
 153 #
 154 # @tls: true if the channel is encrypted, false otherwise.
 155 #
 156 # Since: 0.14.0
 157 ##
 158 { 'struct': 'SpiceChannel',
 159   'base': 'SpiceBasicInfo',
 160   'data': {'connection-id': 'int', 'channel-type': 'int', 'channel-id': 'int',
 161            'tls': 'bool'},
 162   'if': 'defined(CONFIG_SPICE)' }
 163
 164 ##
 165 # @SpiceQueryMouseMode:
 166 #
 167 # An enumeration of Spice mouse states.
 168 #
 169 # @client: Mouse cursor position is determined by the client.
 170 #
 171 # @server: Mouse cursor position is determined by the server.
 172 #
 173 # @unknown: No information is available about mouse mode used by
 174 #           the spice server.
 175 #
 176 # Note: spice/enums.h has a SpiceMouseMode already, hence the name.
 177 #
 178 # Since: 1.1
 179 ##
 180 { 'enum': 'SpiceQueryMouseMode',
 181   'data': [ 'client', 'server', 'unknown' ],
 182   'if': 'defined(CONFIG_SPICE)' }
 183
 184 ##
 185 # @SpiceInfo:
 186 #
 187 # Information about the SPICE session.
 188 #
 189 # @enabled: true if the SPICE server is enabled, false otherwise
 190 #
 191 # @migrated: true if the last guest migration completed and spice
 192 #            migration had completed as well. false otherwise. (since 1.4)
 193 #
 194 # @host: The hostname the SPICE server is bound to.  This depends on
 195 #        the name resolution on the host and may be an IP address.
 196 #
 197 # @port: The SPICE server's port number.
 198 #
 199 # @compiled-version: SPICE server version.
 200 #
 201 # @tls-port: The SPICE server's TLS port number.
 202 #
 203 # @auth: the current authentication type used by the server
 204 #        'none'  if no authentication is being used
 205 #        'spice' uses SASL or direct TLS authentication, depending on command
 206 #                line options
 207 #
 208 # @mouse-mode: The mode in which the mouse cursor is displayed currently. Can
 209 #              be determined by the client or the server, or unknown if spice
 210 #              server doesn't provide this information. (since: 1.1)
 211 #
 212 # @channels: a list of @SpiceChannel for each active spice channel
 213 #
 214 # Since: 0.14.0
 215 ##
 216 { 'struct': 'SpiceInfo',
 217   'data': {'enabled': 'bool', 'migrated': 'bool', '*host': 'str', '*port': 'int',
 218            '*tls-port': 'int', '*auth': 'str', '*compiled-version': 'str',
 219            'mouse-mode': 'SpiceQueryMouseMode', '*channels': ['SpiceChannel']},
 220   'if': 'defined(CONFIG_SPICE)' }
 221
 222 ##
 223 # @query-spice:
 224 #
 225 # Returns information about the current SPICE server
 226 #
 227 # Returns: @SpiceInfo
 228 #
 229 # Since: 0.14.0
 230 #
 231 # Example:
 232 #
 233 # -> { "execute": "query-spice" }
 234 # <- { "return": {
 235 #          "enabled": true,
 236 #          "auth": "spice",
 237 #          "port": 5920,
 238 #          "tls-port": 5921,
 239 #          "host": "0.0.0.0",
 240 #          "channels": [
 241 #             {
 242 #                "port": "54924",
 243 #                "family": "ipv4",
 244 #                "channel-type": 1,
 245 #                "connection-id": 1804289383,
 246 #                "host": "127.0.0.1",
 247 #                "channel-id": 0,
 248 #                "tls": true
 249 #             },
 250 #             {
 251 #                "port": "36710",
 252 #                "family": "ipv4",
 253 #                "channel-type": 4,
 254 #                "connection-id": 1804289383,
 255 #                "host": "127.0.0.1",
 256 #                "channel-id": 0,
 257 #                "tls": false
 258 #             },
 259 #             [ ... more channels follow ... ]
 260 #          ]
 261 #       }
 262 #    }
 263 #
 264 ##
 265 { 'command': 'query-spice', 'returns': 'SpiceInfo',
 266   'if': 'defined(CONFIG_SPICE)' }
 267
 268 ##
 269 # @SPICE_CONNECTED:
 270 #
 271 # Emitted when a SPICE client establishes a connection
 272 #
 273 # @server: server information
 274 #
 275 # @client: client information
 276 #
 277 # Since: 0.14.0
 278 #
 279 # Example:
 280 #
 281 # <- { "timestamp": {"seconds": 1290688046, "microseconds": 388707},
 282 #      "event": "SPICE_CONNECTED",
 283 #      "data": {
 284 #        "server": { "port": "5920", "family": "ipv4", "host": "127.0.0.1"},
 285 #        "client": {"port": "52873", "family": "ipv4", "host": "127.0.0.1"}
 286 #    }}
 287 #
 288 ##
 289 { 'event': 'SPICE_CONNECTED',
 290   'data': { 'server': 'SpiceBasicInfo',
 291             'client': 'SpiceBasicInfo' },
 292   'if': 'defined(CONFIG_SPICE)' }
 293
 294 ##
 295 # @SPICE_INITIALIZED:
 296 #
 297 # Emitted after initial handshake and authentication takes place (if any)
 298 # and the SPICE channel is up and running
 299 #
 300 # @server: server information
 301 #
 302 # @client: client information
 303 #
 304 # Since: 0.14.0
 305 #
 306 # Example:
 307 #
 308 # <- { "timestamp": {"seconds": 1290688046, "microseconds": 417172},
 309 #      "event": "SPICE_INITIALIZED",
 310 #      "data": {"server": {"auth": "spice", "port": "5921",
 311 #                          "family": "ipv4", "host": "127.0.0.1"},
 312 #               "client": {"port": "49004", "family": "ipv4", "channel-type": 3,
 313 #                          "connection-id": 1804289383, "host": "127.0.0.1",
 314 #                          "channel-id": 0, "tls": true}
 315 #    }}
 316 #
 317 ##
 318 { 'event': 'SPICE_INITIALIZED',
 319   'data': { 'server': 'SpiceServerInfo',
 320             'client': 'SpiceChannel' },
 321   'if': 'defined(CONFIG_SPICE)' }
 322
 323 ##
 324 # @SPICE_DISCONNECTED:
 325 #
 326 # Emitted when the SPICE connection is closed
 327 #
 328 # @server: server information
 329 #
 330 # @client: client information
 331 #
 332 # Since: 0.14.0
 333 #
 334 # Example:
 335 #
 336 # <- { "timestamp": {"seconds": 1290688046, "microseconds": 388707},
 337 #      "event": "SPICE_DISCONNECTED",
 338 #      "data": {
 339 #        "server": { "port": "5920", "family": "ipv4", "host": "127.0.0.1"},
 340 #        "client": {"port": "52873", "family": "ipv4", "host": "127.0.0.1"}
 341 #    }}
 342 #
 343 ##
 344 { 'event': 'SPICE_DISCONNECTED',
 345   'data': { 'server': 'SpiceBasicInfo',
 346             'client': 'SpiceBasicInfo' },
 347   'if': 'defined(CONFIG_SPICE)' }
 348
 349 ##
 350 # @SPICE_MIGRATE_COMPLETED:
 351 #
 352 # Emitted when SPICE migration has completed
 353 #
 354 # Since: 1.3
 355 #
 356 # Example:
 357 #
 358 # <- { "timestamp": {"seconds": 1290688046, "microseconds": 417172},
 359 #      "event": "SPICE_MIGRATE_COMPLETED" }
 360 #
 361 ##
 362 { 'event': 'SPICE_MIGRATE_COMPLETED',
 363   'if': 'defined(CONFIG_SPICE)' }
 364
 365 ##
 366 # == VNC
 367 ##
 368
 369 ##
 370 # @VncBasicInfo:
 371 #
 372 # The basic information for vnc network connection
 373 #
 374 # @host: IP address
 375 #
 376 # @service: The service name of the vnc port. This may depend on the host
 377 #           system's service database so symbolic names should not be relied
 378 #           on.
 379 #
 380 # @family: address family
 381 #
 382 # @websocket: true in case the socket is a websocket (since 2.3).
 383 #
 384 # Since: 2.1
 385 ##
 386 { 'struct': 'VncBasicInfo',
 387   'data': { 'host': 'str',
 388             'service': 'str',
 389             'family': 'NetworkAddressFamily',
 390             'websocket': 'bool' },
 391   'if': 'defined(CONFIG_VNC)' }
 392
 393 ##
 394 # @VncServerInfo:
 395 #
 396 # The network connection information for server
 397 #
 398 # @auth: authentication method used for
 399 #        the plain (non-websocket) VNC server
 400 #
 401 # Since: 2.1
 402 ##
 403 { 'struct': 'VncServerInfo',
 404   'base': 'VncBasicInfo',
 405   'data': { '*auth': 'str' },
 406   'if': 'defined(CONFIG_VNC)' }
 407
 408 ##
 409 # @VncClientInfo:
 410 #
 411 # Information about a connected VNC client.
 412 #
 413 # @x509_dname: If x509 authentication is in use, the Distinguished
 414 #              Name of the client.
 415 #
 416 # @sasl_username: If SASL authentication is in use, the SASL username
 417 #                 used for authentication.
 418 #
 419 # Since: 0.14.0
 420 ##
 421 { 'struct': 'VncClientInfo',
 422   'base': 'VncBasicInfo',
 423   'data': { '*x509_dname': 'str', '*sasl_username': 'str' },
 424   'if': 'defined(CONFIG_VNC)' }
 425
 426 ##
 427 # @VncInfo:
 428 #
 429 # Information about the VNC session.
 430 #
 431 # @enabled: true if the VNC server is enabled, false otherwise
 432 #
 433 # @host: The hostname the VNC server is bound to.  This depends on
 434 #        the name resolution on the host and may be an IP address.
 435 #
 436 # @family: 'ipv6' if the host is listening for IPv6 connections
 437 #                    'ipv4' if the host is listening for IPv4 connections
 438 #                    'unix' if the host is listening on a unix domain socket
 439 #                    'unknown' otherwise
 440 #
 441 # @service: The service name of the server's port.  This may depends
 442 #           on the host system's service database so symbolic names should not
 443 #           be relied on.
 444 #
 445 # @auth: the current authentication type used by the server
 446 #        'none' if no authentication is being used
 447 #        'vnc' if VNC authentication is being used
 448 #        'vencrypt+plain' if VEncrypt is used with plain text authentication
 449 #        'vencrypt+tls+none' if VEncrypt is used with TLS and no authentication
 450 #        'vencrypt+tls+vnc' if VEncrypt is used with TLS and VNC authentication
 451 #        'vencrypt+tls+plain' if VEncrypt is used with TLS and plain text auth
 452 #        'vencrypt+x509+none' if VEncrypt is used with x509 and no auth
 453 #        'vencrypt+x509+vnc' if VEncrypt is used with x509 and VNC auth
 454 #        'vencrypt+x509+plain' if VEncrypt is used with x509 and plain text auth
 455 #        'vencrypt+tls+sasl' if VEncrypt is used with TLS and SASL auth
 456 #        'vencrypt+x509+sasl' if VEncrypt is used with x509 and SASL auth
 457 #
 458 # @clients: a list of @VncClientInfo of all currently connected clients
 459 #
 460 # Since: 0.14.0
 461 ##
 462 { 'struct': 'VncInfo',
 463   'data': {'enabled': 'bool', '*host': 'str',
 464            '*family': 'NetworkAddressFamily',
 465            '*service': 'str', '*auth': 'str', '*clients': ['VncClientInfo']},
 466   'if': 'defined(CONFIG_VNC)' }
 467
 468 ##
 469 # @VncPrimaryAuth:
 470 #
 471 # vnc primary authentication method.
 472 #
 473 # Since: 2.3
 474 ##
 475 { 'enum': 'VncPrimaryAuth',
 476   'data': [ 'none', 'vnc', 'ra2', 'ra2ne', 'tight', 'ultra',
 477             'tls', 'vencrypt', 'sasl' ],
 478   'if': 'defined(CONFIG_VNC)' }
 479
 480 ##
 481 # @VncVencryptSubAuth:
 482 #
 483 # vnc sub authentication method with vencrypt.
 484 #
 485 # Since: 2.3
 486 ##
 487 { 'enum': 'VncVencryptSubAuth',
 488   'data': [ 'plain',
 489             'tls-none',  'x509-none',
 490             'tls-vnc',   'x509-vnc',
 491             'tls-plain', 'x509-plain',
 492             'tls-sasl',  'x509-sasl' ],
 493   'if': 'defined(CONFIG_VNC)' }
 494
 495 ##
 496 # @VncServerInfo2:
 497 #
 498 # The network connection information for server
 499 #
 500 # @auth: The current authentication type used by the servers
 501 #
 502 # @vencrypt: The vencrypt sub authentication type used by the
 503 #            servers, only specified in case auth == vencrypt.
 504 #
 505 # Since: 2.9
 506 ##
 507 { 'struct': 'VncServerInfo2',
 508   'base': 'VncBasicInfo',
 509   'data': { 'auth'      : 'VncPrimaryAuth',
 510             '*vencrypt' : 'VncVencryptSubAuth' },
 511   'if': 'defined(CONFIG_VNC)' }
 512
 513 ##
 514 # @VncInfo2:
 515 #
 516 # Information about a vnc server
 517 #
 518 # @id: vnc server name.
 519 #
 520 # @server: A list of @VncBasincInfo describing all listening sockets.
 521 #          The list can be empty (in case the vnc server is disabled).
 522 #          It also may have multiple entries: normal + websocket,
 523 #          possibly also ipv4 + ipv6 in the future.
 524 #
 525 # @clients: A list of @VncClientInfo of all currently connected clients.
 526 #           The list can be empty, for obvious reasons.
 527 #
 528 # @auth: The current authentication type used by the non-websockets servers
 529 #
 530 # @vencrypt: The vencrypt authentication type used by the servers,
 531 #            only specified in case auth == vencrypt.
 532 #
 533 # @display: The display device the vnc server is linked to.
 534 #
 535 # Since: 2.3
 536 ##
 537 { 'struct': 'VncInfo2',
 538   'data': { 'id'        : 'str',
 539             'server'    : ['VncServerInfo2'],
 540             'clients'   : ['VncClientInfo'],
 541             'auth'      : 'VncPrimaryAuth',
 542             '*vencrypt' : 'VncVencryptSubAuth',
 543             '*display'  : 'str' },
 544   'if': 'defined(CONFIG_VNC)' }
 545
 546 ##
 547 # @query-vnc:
 548 #
 549 # Returns information about the current VNC server
 550 #
 551 # Returns: @VncInfo
 552 #
 553 # Since: 0.14.0
 554 #
 555 # Example:
 556 #
 557 # -> { "execute": "query-vnc" }
 558 # <- { "return": {
 559 #          "enabled":true,
 560 #          "host":"0.0.0.0",
 561 #          "service":"50402",
 562 #          "auth":"vnc",
 563 #          "family":"ipv4",
 564 #          "clients":[
 565 #             {
 566 #                "host":"127.0.0.1",
 567 #                "service":"50401",
 568 #                "family":"ipv4"
 569 #             }
 570 #          ]
 571 #       }
 572 #    }
 573 #
 574 ##
 575 { 'command': 'query-vnc', 'returns': 'VncInfo',
 576   'if': 'defined(CONFIG_VNC)' }
 577 ##
 578 # @query-vnc-servers:
 579 #
 580 # Returns a list of vnc servers.  The list can be empty.
 581 #
 582 # Returns: a list of @VncInfo2
 583 #
 584 # Since: 2.3
 585 ##
 586 { 'command': 'query-vnc-servers', 'returns': ['VncInfo2'],
 587   'if': 'defined(CONFIG_VNC)' }
 588
 589 ##
 590 # @change-vnc-password:
 591 #
 592 # Change the VNC server password.
 593 #
 594 # @password:  the new password to use with VNC authentication
 595 #
 596 # Since: 1.1
 597 #
 598 # Notes:  An empty password in this command will set the password to the empty
 599 #         string.  Existing clients are unaffected by executing this command.
 600 ##
 601 { 'command': 'change-vnc-password',
 602   'data': { 'password': 'str' },
 603   'if': 'defined(CONFIG_VNC)' }
 604
 605 ##
 606 # @VNC_CONNECTED:
 607 #
 608 # Emitted when a VNC client establishes a connection
 609 #
 610 # @server: server information
 611 #
 612 # @client: client information
 613 #
 614 # Note: This event is emitted before any authentication takes place, thus
 615 # the authentication ID is not provided
 616 #
 617 # Since: 0.13.0
 618 #
 619 # Example:
 620 #
 621 # <- { "event": "VNC_CONNECTED",
 622 #      "data": {
 623 #            "server": { "auth": "sasl", "family": "ipv4",
 624 #                        "service": "5901", "host": "0.0.0.0" },
 625 #            "client": { "family": "ipv4", "service": "58425",
 626 #                        "host": "127.0.0.1" } },
 627 #      "timestamp": { "seconds": 1262976601, "microseconds": 975795 } }
 628 #
 629 ##
 630 { 'event': 'VNC_CONNECTED',
 631   'data': { 'server': 'VncServerInfo',
 632             'client': 'VncBasicInfo' },
 633   'if': 'defined(CONFIG_VNC)' }
 634
 635 ##
 636 # @VNC_INITIALIZED:
 637 #
 638 # Emitted after authentication takes place (if any) and the VNC session is
 639 # made active
 640 #
 641 # @server: server information
 642 #
 643 # @client: client information
 644 #
 645 # Since: 0.13.0
 646 #
 647 # Example:
 648 #
 649 # <-  { "event": "VNC_INITIALIZED",
 650 #       "data": {
 651 #            "server": { "auth": "sasl", "family": "ipv4",
 652 #                        "service": "5901", "host": "0.0.0.0"},
 653 #            "client": { "family": "ipv4", "service": "46089",
 654 #                        "host": "127.0.0.1", "sasl_username": "luiz" } },
 655 #       "timestamp": { "seconds": 1263475302, "microseconds": 150772 } }
 656 #
 657 ##
 658 { 'event': 'VNC_INITIALIZED',
 659   'data': { 'server': 'VncServerInfo',
 660             'client': 'VncClientInfo' },
 661   'if': 'defined(CONFIG_VNC)' }
 662
 663 ##
 664 # @VNC_DISCONNECTED:
 665 #
 666 # Emitted when the connection is closed
 667 #
 668 # @server: server information
 669 #
 670 # @client: client information
 671 #
 672 # Since: 0.13.0
 673 #
 674 # Example:
 675 #
 676 # <- { "event": "VNC_DISCONNECTED",
 677 #      "data": {
 678 #            "server": { "auth": "sasl", "family": "ipv4",
 679 #                        "service": "5901", "host": "0.0.0.0" },
 680 #            "client": { "family": "ipv4", "service": "58425",
 681 #                        "host": "127.0.0.1", "sasl_username": "luiz" } },
 682 #      "timestamp": { "seconds": 1262976601, "microseconds": 975795 } }
 683 #
 684 ##
 685 { 'event': 'VNC_DISCONNECTED',
 686   'data': { 'server': 'VncServerInfo',
 687             'client': 'VncClientInfo' },
 688   'if': 'defined(CONFIG_VNC)' }
 689
 690 ##
 691 # = Input
 692 ##
 693
 694 ##
 695 # @MouseInfo:
 696 #
 697 # Information about a mouse device.
 698 #
 699 # @name: the name of the mouse device
 700 #
 701 # @index: the index of the mouse device
 702 #
 703 # @current: true if this device is currently receiving mouse events
 704 #
 705 # @absolute: true if this device supports absolute coordinates as input
 706 #
 707 # Since: 0.14.0
 708 ##
 709 { 'struct': 'MouseInfo',
 710   'data': {'name': 'str', 'index': 'int', 'current': 'bool',
 711            'absolute': 'bool'} }
 712
 713 ##
 714 # @query-mice:
 715 #
 716 # Returns information about each active mouse device
 717 #
 718 # Returns: a list of @MouseInfo for each device
 719 #
 720 # Since: 0.14.0
 721 #
 722 # Example:
 723 #
 724 # -> { "execute": "query-mice" }
 725 # <- { "return": [
 726 #          {
 727 #             "name":"QEMU Microsoft Mouse",
 728 #             "index":0,
 729 #             "current":false,
 730 #             "absolute":false
 731 #          },
 732 #          {
 733 #             "name":"QEMU PS/2 Mouse",
 734 #             "index":1,
 735 #             "current":true,
 736 #             "absolute":true
 737 #          }
 738 #       ]
 739 #    }
 740 #
 741 ##
 742 { 'command': 'query-mice', 'returns': ['MouseInfo'] }
 743
 744 ##
 745 # @QKeyCode:
 746 #
 747 # An enumeration of key name.
 748 #
 749 # This is used by the @send-key command.
 750 #
 751 # @unmapped: since 2.0
 752 # @pause: since 2.0
 753 # @ro: since 2.4
 754 # @kp_comma: since 2.4
 755 # @kp_equals: since 2.6
 756 # @power: since 2.6
 757 # @hiragana: since 2.9
 758 # @henkan: since 2.9
 759 # @yen: since 2.9
 760 #
 761 # @sleep: since 2.10
 762 # @wake: since 2.10
 763 # @audionext: since 2.10
 764 # @audioprev: since 2.10
 765 # @audiostop: since 2.10
 766 # @audioplay: since 2.10
 767 # @audiomute: since 2.10
 768 # @volumeup: since 2.10
 769 # @volumedown: since 2.10
 770 # @mediaselect: since 2.10
 771 # @mail: since 2.10
 772 # @calculator: since 2.10
 773 # @computer: since 2.10
 774 # @ac_home: since 2.10
 775 # @ac_back: since 2.10
 776 # @ac_forward: since 2.10
 777 # @ac_refresh: since 2.10
 778 # @ac_bookmarks: since 2.10
 779 # altgr, altgr_r: dropped in 2.10
 780 #
 781 # @muhenkan: since 2.12
 782 # @katakanahiragana: since 2.12
 783 #
 784 # 'sysrq' was mistakenly added to hack around the fact that
 785 # the ps2 driver was not generating correct scancodes sequences
 786 # when 'alt+print' was pressed. This flaw is now fixed and the
 787 # 'sysrq' key serves no further purpose. Any further use of
 788 # 'sysrq' will be transparently changed to 'print', so they
 789 # are effectively synonyms.
 790 #
 791 # Since: 1.3.0
 792 #
 793 ##
 794 { 'enum': 'QKeyCode',
 795   'data': [ 'unmapped',
 796             'shift', 'shift_r', 'alt', 'alt_r', 'ctrl',
 797             'ctrl_r', 'menu', 'esc', '1', '2', '3', '4', '5', '6', '7', '8',
 798             '9', '0', 'minus', 'equal', 'backspace', 'tab', 'q', 'w', 'e',
 799             'r', 't', 'y', 'u', 'i', 'o', 'p', 'bracket_left', 'bracket_right',
 800             'ret', 'a', 's', 'd', 'f', 'g', 'h', 'j', 'k', 'l', 'semicolon',
 801             'apostrophe', 'grave_accent', 'backslash', 'z', 'x', 'c', 'v', 'b',
 802             'n', 'm', 'comma', 'dot', 'slash', 'asterisk', 'spc', 'caps_lock',
 803             'f1', 'f2', 'f3', 'f4', 'f5', 'f6', 'f7', 'f8', 'f9', 'f10',
 804             'num_lock', 'scroll_lock', 'kp_divide', 'kp_multiply',
 805             'kp_subtract', 'kp_add', 'kp_enter', 'kp_decimal', 'sysrq', 'kp_0',
 806             'kp_1', 'kp_2', 'kp_3', 'kp_4', 'kp_5', 'kp_6', 'kp_7', 'kp_8',
 807             'kp_9', 'less', 'f11', 'f12', 'print', 'home', 'pgup', 'pgdn', 'end',
 808             'left', 'up', 'down', 'right', 'insert', 'delete', 'stop', 'again',
 809             'props', 'undo', 'front', 'copy', 'open', 'paste', 'find', 'cut',
 810             'lf', 'help', 'meta_l', 'meta_r', 'compose', 'pause',
 811             'ro', 'hiragana', 'henkan', 'yen', 'muhenkan', 'katakanahiragana',
 812             'kp_comma', 'kp_equals', 'power', 'sleep', 'wake',
 813             'audionext', 'audioprev', 'audiostop', 'audioplay', 'audiomute',
 814             'volumeup', 'volumedown', 'mediaselect',
 815             'mail', 'calculator', 'computer',
 816             'ac_home', 'ac_back', 'ac_forward', 'ac_refresh', 'ac_bookmarks' ] }
 817
 818 ##
 819 # @KeyValue:
 820 #
 821 # Represents a keyboard key.
 822 #
 823 # Since: 1.3.0
 824 ##
 825 { 'union': 'KeyValue',
 826   'data': {
 827     'number': 'int',
 828     'qcode': 'QKeyCode' } }
 829
 830 ##
 831 # @send-key:
 832 #
 833 # Send keys to guest.
 834 #
 835 # @keys: An array of @KeyValue elements. All @KeyValues in this array are
 836 #        simultaneously sent to the guest. A @KeyValue.number value is sent
 837 #        directly to the guest, while @KeyValue.qcode must be a valid
 838 #        @QKeyCode value
 839 #
 840 # @hold-time: time to delay key up events, milliseconds. Defaults
 841 #             to 100
 842 #
 843 # Returns: Nothing on success
 844 #          If key is unknown or redundant, InvalidParameter
 845 #
 846 # Since: 1.3.0
 847 #
 848 # Example:
 849 #
 850 # -> { "execute": "send-key",
 851 #      "arguments": { "keys": [ { "type": "qcode", "data": "ctrl" },
 852 #                               { "type": "qcode", "data": "alt" },
 853 #                               { "type": "qcode", "data": "delete" } ] } }
 854 # <- { "return": {} }
 855 #
 856 ##
 857 { 'command': 'send-key',
 858   'data': { 'keys': ['KeyValue'], '*hold-time': 'int' } }
 859
 860 ##
 861 # @InputButton:
 862 #
 863 # Button of a pointer input device (mouse, tablet).
 864 #
 865 # @side: front side button of a 5-button mouse (since 2.9)
 866 #
 867 # @extra: rear side button of a 5-button mouse (since 2.9)
 868 #
 869 # Since: 2.0
 870 ##
 871 { 'enum'  : 'InputButton',
 872   'data'  : [ 'left', 'middle', 'right', 'wheel-up', 'wheel-down', 'side',
 873   'extra' ] }
 874
 875 ##
 876 # @InputAxis:
 877 #
 878 # Position axis of a pointer input device (mouse, tablet).
 879 #
 880 # Since: 2.0
 881 ##
 882 { 'enum'  : 'InputAxis',
 883   'data'  : [ 'x', 'y' ] }
 884
 885 ##
 886 # @InputKeyEvent:
 887 #
 888 # Keyboard input event.
 889 #
 890 # @key:    Which key this event is for.
 891 # @down:   True for key-down and false for key-up events.
 892 #
 893 # Since: 2.0
 894 ##
 895 { 'struct'  : 'InputKeyEvent',
 896   'data'  : { 'key'     : 'KeyValue',
 897               'down'    : 'bool' } }
 898
 899 ##
 900 # @InputBtnEvent:
 901 #
 902 # Pointer button input event.
 903 #
 904 # @button: Which button this event is for.
 905 # @down:   True for key-down and false for key-up events.
 906 #
 907 # Since: 2.0
 908 ##
 909 { 'struct'  : 'InputBtnEvent',
 910   'data'  : { 'button'  : 'InputButton',
 911               'down'    : 'bool' } }
 912
 913 ##
 914 # @InputMoveEvent:
 915 #
 916 # Pointer motion input event.
 917 #
 918 # @axis:   Which axis is referenced by @value.
 919 # @value:  Pointer position.  For absolute coordinates the
 920 #          valid range is 0 -> 0x7ffff
 921 #
 922 # Since: 2.0
 923 ##
 924 { 'struct'  : 'InputMoveEvent',
 925   'data'  : { 'axis'    : 'InputAxis',
 926               'value'   : 'int' } }
 927
 928 ##
 929 # @InputEvent:
 930 #
 931 # Input event union.
 932 #
 933 # @type: the input type, one of:
 934 #  - 'key': Input event of Keyboard
 935 #  - 'btn': Input event of pointer buttons
 936 #  - 'rel': Input event of relative pointer motion
 937 #  - 'abs': Input event of absolute pointer motion
 938 #
 939 # Since: 2.0
 940 ##
 941 { 'union' : 'InputEvent',
 942   'data'  : { 'key'     : 'InputKeyEvent',
 943               'btn'     : 'InputBtnEvent',
 944               'rel'     : 'InputMoveEvent',
 945               'abs'     : 'InputMoveEvent' } }
 946
 947 ##
 948 # @input-send-event:
 949 #
 950 # Send input event(s) to guest.
 951 #
 952 # @device: display device to send event(s) to.
 953 # @head: head to send event(s) to, in case the
 954 #        display device supports multiple scanouts.
 955 # @events: List of InputEvent union.
 956 #
 957 # Returns: Nothing on success.
 958 #
 959 # The @device and @head parameters can be used to send the input event
 960 # to specific input devices in case (a) multiple input devices of the
 961 # same kind are added to the virtual machine and (b) you have
 962 # configured input routing (see docs/multiseat.txt) for those input
 963 # devices.  The parameters work exactly like the device and head
 964 # properties of input devices.  If @device is missing, only devices
 965 # that have no input routing config are admissible.  If @device is
 966 # specified, both input devices with and without input routing config
 967 # are admissible, but devices with input routing config take
 968 # precedence.
 969 #
 970 # Since: 2.6
 971 #
 972 # Note: The consoles are visible in the qom tree, under
 973 # /backend/console[$index]. They have a device link and head property,
 974 # so it is possible to map which console belongs to which device and
 975 # display.
 976 #
 977 # Example:
 978 #
 979 # 1. Press left mouse button.
 980 #
 981 # -> { "execute": "input-send-event",
 982 #     "arguments": { "device": "video0",
 983 #                    "events": [ { "type": "btn",
 984 #                    "data" : { "down": true, "button": "left" } } ] } }
 985 # <- { "return": {} }
 986 #
 987 # -> { "execute": "input-send-event",
 988 #     "arguments": { "device": "video0",
 989 #                    "events": [ { "type": "btn",
 990 #                    "data" : { "down": false, "button": "left" } } ] } }
 991 # <- { "return": {} }
 992 #
 993 # 2. Press ctrl-alt-del.
 994 #
 995 # -> { "execute": "input-send-event",
 996 #      "arguments": { "events": [
 997 #         { "type": "key", "data" : { "down": true,
 998 #           "key": {"type": "qcode", "data": "ctrl" } } },
 999 #         { "type": "key", "data" : { "down": true,
1000 #           "key": {"type": "qcode", "data": "alt" } } },
1001 #         { "type": "key", "data" : { "down": true,
1002 #           "key": {"type": "qcode", "data": "delete" } } } ] } }
1003 # <- { "return": {} }
1004 #
1005 # 3. Move mouse pointer to absolute coordinates (20000, 400).
1006 #
1007 # -> { "execute": "input-send-event" ,
1008 #   "arguments": { "events": [
1009 #                { "type": "abs", "data" : { "axis": "x", "value" : 20000 } },
1010 #                { "type": "abs", "data" : { "axis": "y", "value" : 400 } } ] } }
1011 # <- { "return": {} }
1012 #
1013 ##
1014 { 'command': 'input-send-event',
1015   'data': { '*device': 'str',
1016             '*head'  : 'int',
1017             'events' : [ 'InputEvent' ] } }
1018
1019 ##
1020 # @GrabToggleKeys:
1021 #
1022 # Keys to toggle input-linux between host and guest.
1023 #
1024 # Since: 4.0
1025 #
1026 ##
1027 { 'enum': 'GrabToggleKeys',
1028   'data': [ 'ctrl-ctrl', 'alt-alt', 'shift-shift','meta-meta', 'scrolllock',
1029             'ctrl-scrolllock' ] }
1030
1031 ##
1032 # @DisplayGTK:
1033 #
1034 # GTK display options.
1035 #
1036 # @grab-on-hover: Grab keyboard input on mouse hover.
1037 # @zoom-to-fit: Zoom guest display to fit into the host window.  When
1038 #               turned off the host window will be resized instead.
1039 #               In case the display device can notify the guest on
1040 #               window resizes (virtio-gpu) this will default to "on",
1041 #               assuming the guest will resize the display to match
1042 #               the window size then.  Otherwise it defaults to "off".
1043 #               Since 3.1
1044 #
1045 # Since: 2.12
1046 #
1047 ##
1048 { 'struct'  : 'DisplayGTK',
1049   'data'    : { '*grab-on-hover' : 'bool',
1050                 '*zoom-to-fit'   : 'bool'  } }
1051
1052 ##
1053 # @DisplayEGLHeadless:
1054 #
1055 # EGL headless display options.
1056 #
1057 # @rendernode: Which DRM render node should be used. Default is the first
1058 #              available node on the host.
1059 #
1060 # Since: 3.1
1061 #
1062 ##
1063 { 'struct'  : 'DisplayEGLHeadless',
1064   'data'    : { '*rendernode' : 'str' } }
1065
1066  ##
1067  # @DisplayGLMode:
1068  #
1069  # Display OpenGL mode.
1070  #
1071  # @off: Disable OpenGL (default).
1072  # @on: Use OpenGL, pick context type automatically.
1073  #      Would better be named 'auto' but is called 'on' for backward
1074  #      compatibility with bool type.
1075  # @core: Use OpenGL with Core (desktop) Context.
1076  # @es: Use OpenGL with ES (embedded systems) Context.
1077  #
1078  # Since: 3.0
1079  #
1080  ##
1081  { 'enum'    : 'DisplayGLMode',
1082    'data'    : [ 'off', 'on', 'core', 'es' ] }
1083
1084 ##
1085 # @DisplayCurses:
1086 #
1087 # Curses display options.
1088 #
1089 # @charset:       Font charset used by guest (default: CP437).
1090 #
1091 # Since: 4.0
1092 #
1093 ##
1094 { 'struct'  : 'DisplayCurses',
1095   'data'    : { '*charset'       : 'str' } }
1096
1097 ##
1098 # @DisplayType:
1099 #
1100 # Display (user interface) type.
1101 #
1102 # @default: The default user interface, selecting from the first available
1103 #           of gtk, sdl, cocoa, and vnc.
1104 #
1105 # @none: No user interface or video output display. The guest will
1106 #        still see an emulated graphics card, but its output will not
1107 #        be displayed to the QEMU user.
1108 #
1109 # @gtk: The GTK user interface.
1110 #
1111 # @sdl: The SDL user interface.
1112 #
1113 # @egl-headless: No user interface, offload GL operations to a local
1114 #                DRI device. Graphical display need to be paired with
1115 #                VNC or Spice. (Since 3.1)
1116 #
1117 # @curses: Display video output via curses.  For graphics device
1118 #          models which support a text mode, QEMU can display this
1119 #          output using a curses/ncurses interface. Nothing is
1120 #          displayed when the graphics device is in graphical mode or
1121 #          if the graphics device does not support a text
1122 #          mode. Generally only the VGA device models support text
1123 #          mode.
1124 #
1125 # @cocoa: The Cocoa user interface.
1126 #
1127 # @spice-app: Set up a Spice server and run the default associated
1128 #             application to connect to it. The server will redirect
1129 #             the serial console and QEMU monitors. (Since 4.0)
1130 #
1131 # Since: 2.12
1132 #
1133 ##
1134 { 'enum'    : 'DisplayType',
1135   'data'    : [ 'default', 'none', 'gtk', 'sdl',
1136                 'egl-headless', 'curses', 'cocoa',
1137                 'spice-app'] }
1138
1139 ##
1140 # @DisplayOptions:
1141 #
1142 # Display (user interface) options.
1143 #
1144 # @type:          Which DisplayType qemu should use.
1145 # @full-screen:   Start user interface in fullscreen mode (default: off).
1146 # @window-close:  Allow to quit qemu with window close button (default: on).
1147 # @gl:            Enable OpenGL support (default: off).
1148 #
1149 # Since: 2.12
1150 #
1151 ##
1152 { 'union'   : 'DisplayOptions',
1153   'base'    : { 'type'           : 'DisplayType',
1154                 '*full-screen'   : 'bool',
1155                 '*window-close'  : 'bool',
1156                 '*gl'            : 'DisplayGLMode' },
1157   'discriminator' : 'type',
1158   'data'    : { 'gtk'            : 'DisplayGTK',
1159                 'curses'         : 'DisplayCurses',
1160                 'egl-headless'   : 'DisplayEGLHeadless'} }
1161
1162 ##
1163 # @query-display-options:
1164 #
1165 # Returns information about display configuration
1166 #
1167 # Returns: @DisplayOptions
1168 #
1169 # Since: 3.1
1170 #
1171 ##
1172 { 'command': 'query-display-options',
1173   'returns': 'DisplayOptions' }