1 # This file tells the frr package which daemons to start.
3 # Entries are in the format: <daemon>=(yes|no|priority)
5 # 1, "yes" = highest priority
6 # 2 .. 10 = lower priorities
8 # For daemons which support multiple instances, a 2nd line listing
9 # the instances can be added. Eg for ospfd:
11 # ospfd_instances="1,2"
13 # Priorities were suggested by Dancer <dancer@zeor.simegen.com>.
14 # They're used to start the FRR daemons in more than one step
15 # (for example start one or two at network initialization and the
16 # rest later). The number of FRR daemons being small, priorities
17 # must be between 1 and 9, inclusive (or the initscript has to be
18 # changed). /etc/init.d/frr then can be started as
20 # /etc/init.d/frr <start|stop|restart|<priority>>
22 # where priority 0 is the same as 'stop', priority 10 or 'start'
25 # Sample configurations for these daemons can be found in
26 # /usr/share/doc/frr/examples/.
30 # When activation a daemon at the first time, a config file, even if it is
31 # empty, has to be present *and* be owned by the user and group "frr", else
32 # the daemon will not be started by /etc/init.d/frr. The permissions should
34 # When using "vtysh" such a config file is also needed. It should be owned by
35 # group "frrvty" and set to ug=rw,o= though. Check /etc/pam.d/frr, too.
38 watchfrr_options=("-b_" "-r/usr/lib/frr/frr_restart_%s" "-s/usr/lib/frr/frr_start_%s" "-k/usr/lib/frr/frr_stop_%s")
58 # Command line options for the daemons
60 zebra_options=("-A 127.0.0.1")
61 bgpd_options=("-A 127.0.0.1")
62 ospfd_options=("-A 127.0.0.1")
63 ospf6d_options=("-A ::1")
64 ripd_options=("-A 127.0.0.1")
65 ripngd_options=("-A ::1")
66 isisd_options=("-A 127.0.0.1")
67 ldpd_options=("-A 127.0.0.1")
68 pimd_options=("-A 127.0.0.1")
69 nhrpd_options=("-A 127.0.0.1")
70 eigrpd_options=("-A 127.0.0.1")
71 babeld_options=("-A 127.0.0.1")
72 sharpd_options=("-A 127.0.0.1")
73 pbrd_options=("-A 127.0.0.1")
74 staticd_options=("-A 127.0.0.1")
75 bfdd_options=("-A 127.0.0.1")
78 # If the vtysh_enable is yes, then the unified config is read
79 # and applied if it exists. If no unified frr.conf exists
80 # then the per-daemon <daemon>.conf files are used)
81 # If vtysh_enable is no or non-existant, the frr.conf is ignored.
82 # it is highly suggested to have this set to yes