3 # Some can be overridden on rpmbuild commandline with:
4 # rpmbuild --define 'variable value'
5 # (use any value, ie 1 for flag "with_XXXX" definitions)
7 # E.g. rpmbuild --define 'release_rev 02' may be useful if building
8 # rpms again and again on the same day, so the newer rpms can be installed.
9 # bumping the number each time.
11 #################### FRRouting (FRR) configure options #####################
12 # with-feature options
13 %{!?with_babeld: %global with_babeld 1 }
14 %{!?with_bfdd: %global with_bfdd 1 }
15 %{!?with_bgp_vnc: %global with_bgp_vnc 0 }
16 %{!?with_cumulus: %global with_cumulus 0 }
17 %{!?with_eigrpd: %global with_eigrpd 1 }
18 %{!?with_fpm: %global with_fpm 1 }
19 %{!?with_ldpd: %global with_ldpd 1 }
20 %{!?with_multipath: %global with_multipath 256 }
21 %{!?with_nhrpd: %global with_nhrpd 1 }
22 %{!?with_ospfapi: %global with_ospfapi 1 }
23 %{!?with_ospfclient: %global with_ospfclient 1 }
24 %{!?with_pam: %global with_pam 0 }
25 %{!?with_pbrd: %global with_pbrd 1 }
26 %{!?with_pimd: %global with_pimd 1 }
27 %{!?with_vrrpd: %global with_vrrpd 1 }
28 %{!?with_rtadv: %global with_rtadv 1 }
29 %{!?with_watchfrr: %global with_watchfrr 1 }
30 %{!?with_pathd: %global with_pathd 1 }
33 %{!?frr_user: %global frr_user frr }
34 %{!?vty_group: %global vty_group frrvty }
37 %define configdir
%{_sysconfdir}/%{name}
38 %define _sbindir
/usr
/lib
/frr
39 %define zeb_src
%{_builddir}/%{name}-%{frrversion}
40 %define zeb_rh_src
%{zeb_src}/redhat
41 %define zeb_docs
%{zeb_src}/doc
42 %define frr_tools
%{zeb_src}/tools
44 # defines for configure
45 %define rundir
%{_localstatedir}/run/%{name}
47 ############################################################################
49 #### Version String tweak
50 # Remove invalid characters form version string and replace with _
51 %{expand: %%global rpmversion %(echo '@VERSION@' | tr [:blank:]- _ )}
52 %define frrversion @VERSION@
54 #### Check for systemd or init.d (upstart)
55 # Check for init.d (upstart) as used in CentOS 6 or systemd (ie CentOS 7)
56 %if 0%{?fedora} || 0%{?rhel} >= 7 || 0%{?suse_version} >= 1210
57 %global initsystem systemd
59 %if 0%{?rhel} && 0%{?rhel} < 7
60 %global initsystem upstart
62 %{expand: %%global initsystem %(if [[ `/sbin/init --version 2> /dev/null` =~ upstart ]]; then echo upstart; elif [[ `readlink -f /sbin/init` = /usr/lib/systemd/systemd ]]; then echo systemd; elif [[ `systemctl` =~ -\.mount ]]; then echo systemd; fi)}
66 # Check for python version - use python2.7 on CentOS 6, otherwise python3
67 %if 0%{?rhel} && 0%{?rhel} < 7
73 # If init system is systemd, then always enable watchfrr
74 %if "
%{initsystem}"
== "systemd"
75 %global with_watchfrr
1
78 #### Check for RedHat 6.x or CentOS 6.x - they are too old to support PIM.
79 #### Always disable it on these old systems unconditionally
81 # if CentOS / RedHat and version < 7, then disable PIMd (too old, won't work)
82 %if 0%{?rhel} && 0%{?rhel} < 7
86 # misc internal defines
87 %{!?frr_uid: %global frr_uid 92 }
88 %{!?frr_gid: %global frr_gid 92 }
89 %{!?vty_gid: %global vty_gid 85 }
91 %define daemon_list zebra ripd ospfd bgpd isisd ripngd ospf6d pbrd staticd bfdd fabricd pathd
94 %define daemon_ldpd ldpd
96 %define daemon_ldpd ""
100 %define daemon_pimd pimd
102 %define daemon_pimd ""
106 %define daemon_pbrd pbrd
108 %define daemon_pbrd ""
112 %define daemon_nhrpd nhrpd
114 %define daemon_nhrpd ""
118 %define daemon_eigrpd eigrpd
120 %define daemon_eigrpd ""
124 %define daemon_babeld babeld
126 %define daemon_babeld ""
130 %define daemon_vrrpd vrrpd
132 %define daemon_vrrpd ""
136 %define daemon_watchfrr watchfrr
138 %define daemon_watchfrr ""
142 %define daemon_bfdd bfdd
144 %define daemon_bfdd ""
148 %define daemon_pathd pathd
150 %define daemon_pathd ""
153 %define all_daemons
%{daemon_list} %{daemon_ldpd} %{daemon_pimd} %{daemon_nhrpd} %{daemon_eigrpd} %{daemon_babeld} %{daemon_watchfrr} %{daemon_pbrd} %{daemon_bfdd} %{daemon_vrrpd} %{daemon_pathd}
155 #release sub-revision (the two digits after the CONFDATE)
156 %{!?release_rev: %global release_rev 01 }
158 Summary: Routing daemon
160 Version: %{rpmversion}
161 Release: %{release_rev}%{?dist}
163 Group: System Environment
/Daemons
164 Source0: https
://github.com
/FRRouting
/frr
/archive
/%{name}-%{frrversion}.tar.gz
165 URL: https
://www.frrouting.org
166 Requires(pre
): shadow
-utils
167 Requires(preun
): info
169 BuildRequires
: bison
>= 2.7
170 BuildRequires
: c
-ares
-devel
173 BuildRequires
: json
-c
-devel
174 BuildRequires
: libcap
-devel
176 BuildRequires
: ncurses
-devel
177 BuildRequires
: readline
-devel
178 BuildRequires
: texinfo
179 BuildRequires
: libyang2
-devel
180 %if 0%{?rhel} && 0%{?rhel} < 7
181 #python27-devel is available from ius community repo for RedHat/CentOS 6
182 BuildRequires
: python27
-devel
183 BuildRequires
: python27
-sphinx
186 BuildRequires
: python
-devel
>= 2.7
187 BuildRequires
: python
-sphinx
189 BuildRequires
: python3
-devel
190 BuildRequires
: python3
-sphinx
194 #platform-python-devel is needed for /usr/bin/pathfix.py
195 BuildRequires
: platform
-python
-devel
197 Requires: initscripts
199 BuildRequires
: pam
-devel
201 %if "
%{initsystem}"
== "systemd"
202 BuildRequires
: systemd
203 BuildRequires
: systemd
-devel
204 Requires(post
): systemd
205 Requires(preun
): systemd
206 Requires(postun
): systemd
208 Requires(post
): chkconfig
209 Requires(preun
): chkconfig
210 # Initscripts > 5.60 is required for IPv6 support
211 Requires(pre
): initscripts
>= 5.60
213 Provides: routingdaemon
= %{version}-%{release}
214 Obsoletes
: gated mrt zebra frr
-sysvinit
219 FRRouting is a free software that manages TCP
/IP based routing
220 protocol. It takes multi
-server and multi
-thread approach to resolve
221 the current complexity of the Internet.
223 FRRouting supports BGP4
, OSPFv2
, OSPFv3
, ISIS
, RIP
, RIPng
, PIM
, LDP
224 NHRP
, Babel
, PBR
, EIGRP and BFD.
226 FRRouting is a fork of Quagga.
230 Summary: contrib tools
for frr
231 Group: System Environment
/Daemons
234 Contributed
/3rd party tools which may be of use with frr.
238 Summary: python tools
for frr
239 %if 0%{?rhel} && 0%{?rhel} < 7
240 #python27 is available from ius community repo for RedHat/CentOS 6
241 BuildRequires
: python27
242 Requires: python27
-ipaddress
245 BuildRequires
: python2
246 Requires: python2
-ipaddress
248 BuildRequires
: python3
251 Group: System Environment
/Daemons
253 %description pythontools
254 Contributed python
2.7 tools which may be of use with frr.
258 Summary: Header and object files
for frr development
259 Group: System Environment
/Daemons
260 Requires: %{name} = %{version}-%{release}
263 The frr
-devel package contains the header and object files neccessary
for
264 developing OSPF
-API and frr applications.
268 Summary: BGP RPKI support
(rtrlib
)
269 Group: System Environment
/Daemons
270 BuildRequires
: librtr
-devel
>= 0.5
271 Requires: %{name} = %{version}-%{release}
273 %description rpki
-rtrlib
274 Adds RPKI support to FRR's bgpd
, allowing validation of BGP routes
275 against cryptographic information stored
in WHOIS databases. This is
276 used to prevent hijacking of networks on the wider internet. It is only
277 relevant to internet service providers using their own autonomous system
282 Summary: SNMP support
283 Group: System Environment
/Daemons
284 BuildRequires
: net
-snmp
-devel
285 Requires: %{name} = %{version}-%{release}
288 Adds SNMP support to FRR's daemons by attaching to net
-snmp's snmpd
289 through the AgentX protocol.
Provides read-only access to current
290 routing state through standard SNMP MIBs.
294 %setup -q
-n frr
-%{frrversion}
299 # For standard gcc verbosity, uncomment these lines:
300 #CFLAGS="%{optflags} -Wall -Wsign-compare -Wpointer-arith"
301 #CFLAGS="${CFLAGS} -Wbad-function-cast -Wwrite-strings"
303 # For ultra gcc verbosity, uncomment these lines also:
304 #CFLAGS="${CFLAGS} -W -Wcast-qual -Wstrict-prototypes"
305 #CFLAGS="${CFLAGS} -Wmissing-declarations -Wmissing-noreturn"
306 #CFLAGS="${CFLAGS} -Wmissing-format-attribute -Wunreachable-code"
307 #CFLAGS="${CFLAGS} -Wpacked -Wpadded"
310 --sbindir
=%{_sbindir} \
311 --sysconfdir
=%{configdir} \
312 --localstatedir
=%{rundir} \
316 %if %{with_multipath}
317 --enable-multipath
=%{with_multipath} \
320 %if %{with_ospfclient}
321 --enable-ospfclient \
323 --disable
-ospfclient\
374 --enable-user
=%{frr_user} \
375 --enable-group
=%{frr_user} \
378 --enable-vty
-group
=%{vty_group} \
399 %if "
%{initsystem}"
== "systemd"
416 make %{?_smp_mflags} MAKEINFO
="makeinfo
--no
-split"
419 # Change frr-reload.py to use python2.7
420 sed
-e '
1c
#!/usr/bin/python2.7' -i %{zeb_src}/tools/frr-reload.py
421 sed
-e '
1c
#!/usr/bin/python2.7' -i %{zeb_src}/tools/generate_support_bundle.py
423 # Change frr-reload.py to use python3
424 sed
-e '
1c
#!/usr/bin/python3' -i %{zeb_src}/tools/frr-reload.py
425 sed
-e '
1c
#!/usr/bin/python3' -i %{zeb_src}/tools/generate_support_bundle.py
434 mkdir -p
%{buildroot}%{_sysconfdir}/{frr,sysconfig,logrotate.d,pam.d,default} \
435 %{buildroot}%{_localstatedir}/log/frr %{buildroot}%{_infodir}
436 make DESTDIR
=%{buildroot} INSTALL
="
install -p" CP
="cp
-p"
install
438 # Remove this file, as it is uninstalled and causes errors when building on RH9
439 rm -rf
%{buildroot}/usr
/share
/info
/dir
441 # Remove debian init script if it was installed
442 rm -f
%{buildroot}%{_sbindir}/frr
444 # kill bogus libtool files
445 rm -vf
%{buildroot}%{_libdir}/frr
/modules
/*.la
446 rm -vf
%{buildroot}%{_libdir}/*.la
447 rm -vf
%{buildroot}%{_libdir}/frr
/libyang_plugins
/*.la
449 # install /etc sources
450 %if "
%{initsystem}"
== "systemd"
451 mkdir -p
%{buildroot}%{_unitdir}
452 install -m644
%{zeb_src}/tools/frr.service %{buildroot}%{_unitdir}/frr.service
454 mkdir -p
%{buildroot}%{_initddir}
455 ln
-s
%{_sbindir}/frrinit.sh %{buildroot}%{_initddir}/frr
458 install %{zeb_src}/tools/etc/frr/daemons %{buildroot}%{_sysconfdir}/frr
459 install %{zeb_src}/tools/etc/frr/frr.conf %{buildroot}%{_sysconfdir}/frr
/frr.conf.template
460 install -m644
%{zeb_rh_src}/frr.pam %{buildroot}%{_sysconfdir}/pam.d
/frr
461 install -m644
%{zeb_rh_src}/frr.logrotate %{buildroot}%{_sysconfdir}/logrotate.d
/frr
462 install -d
-m750
%{buildroot}%{rundir}
464 %if 0%{?rhel} > 7 || 0%{?fedora} > 29
465 # avoid `ERROR: ambiguous python shebang in` errors
466 pathfix.py
-pni "
%{__python3} %{py3_shbang_opts}" %{buildroot}/usr
/lib
/frr
/*.py
467 %py_byte_compile %{__python3} %{buildroot}/usr
/lib
/frr
/*.py
473 getent group
%{vty_group} >/dev/null || groupadd -r -g %{vty_gid} %{vty_group}
476 # add frr user and group
478 # Ensure that frr_gid gets correctly allocated
479 getent group
%{frr_user} >/dev/null || groupadd -g %{frr_gid} %{frr_user}
480 getent passwd
%{frr_user} >/dev
/null || \
481 useradd
-r
-u
%{frr_uid} -g %{frr_user} \
482 -s
/sbin
/nologin
-c "FRRouting suite" \
483 -d
%{rundir} %{frr_user}
486 usermod
-a
-G
%{vty_group} %{frr_user}
493 # zebra_spec_add_service <service name> <port/proto> <comment>
494 # e.g. zebra_spec_add_service zebrasrv 2600/tcp "zebra service"
496 zebra_spec_add_service
()
498 # Add port /etc/services entry if it isn't already there
499 if [ -f
%{_sysconfdir}/services
] && \
500 ! %__sed -e 's
/#.*$//' %{_sysconfdir}/services 2>/dev/null | %__grep -wq $1 ; then
501 echo "$
1 $
2 # $3" >> %{_sysconfdir}/services
505 zebra_spec_add_service zebrasrv
2600/tcp "zebra service"
506 zebra_spec_add_service zebra
2601/tcp "zebra vty"
507 zebra_spec_add_service staticd
2616/tcp "staticd vty"
508 zebra_spec_add_service ripd
2602/tcp "RIPd vty"
509 zebra_spec_add_service ripngd
2603/tcp "RIPngd vty"
510 zebra_spec_add_service ospfd
2604/tcp "OSPFd vty"
511 zebra_spec_add_service bgpd
2605/tcp "BGPd vty"
512 zebra_spec_add_service ospf6d
2606/tcp "OSPF6d vty"
513 zebra_spec_add_service isisd
2608/tcp "ISISd vty"
515 zebra_spec_add_service ospfapi
2607/tcp "OSPF
-API"
518 zebra_spec_add_service babeld
2609/tcp "BABELd vty"
521 zebra_spec_add_service nhrpd
2610/tcp "NHRPd vty"
524 zebra_spec_add_service pimd
2611/tcp "PIMd vty"
527 zebra_spec_add_service pbrd
2615/tcp "PBRd vty"
530 zebra_spec_add_service ldpd
2612/tcp "LDPd vty"
533 zebra_spec_add_service eigrpd
2613/tcp "EIGRPd vty"
536 zebra_spec_add_service bfdd
2617/tcp "BFDd vty"
538 zebra_spec_add_service fabricd
2618/tcp "Fabricd vty"
540 zebra_spec_add_service vrrpd
2619/tcp "VRRPd vty"
543 zebra_spec_add_service pathd
2620/tcp "Pathd vty"
546 %if "
%{initsystem}"
== "systemd"
547 for daemon
in %all_daemons ; do
548 %systemd_post frr.service
551 /sbin
/chkconfig
--add frr
554 # Fix bad path in previous config files
555 # Config files won't get replaced by default, so we do this ugly hack to fix it
556 %__sed -i 's|watchfrr_options
=|
#watchfrr_options=|g' %{configdir}/daemons 2> /dev/null || true
558 # With systemd, watchfrr is mandatory. Fix config to make sure it's enabled if
559 # we install or upgrade to a frr built with systemd
560 %if "
%{initsystem}"
== "systemd"
561 %__sed -i 's|watchfrr_enable
=no|watchfrr_enable
=yes|g'
%{configdir}/daemons
2> /dev
/null || true
564 /sbin
/install-info
%{_infodir}/frr.info.gz %{_infodir}/dir
566 # Create dummy config file if they don't exist so basic functions can be used.
567 if [ ! -e
%{configdir}/zebra.conf
]; then
568 # per daemon configs exist
569 mv
%{configdir}/frr.conf.template %{configdir}/frr.conf
571 chown
%{frr_user}:%{frr_user} %{configdir}/frr.conf
573 chmod
640 %{configdir}/frr.conf
576 chown
%{frr_user}:%{frr_user} %{configdir}/daemons
580 # No config for watchfrr - this is part of /etc/sysconfig/frr
581 rm -f
%{configdir}/watchfrr.
*
584 if [ ! -e
%{configdir}/vtysh.conf
]; then
585 touch
%{configdir}/vtysh.conf
586 chmod
640 %{configdir}/vtysh.conf
589 chown
%{frr_user}:%{vty_group} %{configdir}/vtysh.conf
*
596 if [ "$
1"
-ge
1 ]; then
598 # Upgrade from older version
600 %if "
%{initsystem}"
== "systemd"
604 %systemd_postun_with_restart frr.service
609 service frr restart
>/dev
/null
2>&1
616 %if "
%{initsystem}"
== "systemd"
620 if [ $
1 -eq
0 ] ; then
621 %systemd_preun frr.service
627 if [ $
1 -eq
0 ] ; then
628 service frr stop
>/dev
/null
2>&1
629 /sbin
/chkconfig
--del frr
632 /sbin
/install-info
--delete
%{_infodir}/frr.info.gz %{_infodir}/dir
639 /usr
/share
/yang
/*.yang
641 %dir %attr(751,%{frr_user},%{frr_user}) %{configdir}
642 %dir %attr(750,%{frr_user},%{frr_user}) %{_localstatedir}/log
/frr
643 %dir %attr(751,%{frr_user},%{frr_user}) %{rundir}
645 %dir %attr(750,root
,root
) %{configdir}
646 %dir %attr(750,root
,root
) %{_localstatedir}/log
/frr
647 %dir %attr(750,root
,root
) %{rundir}
649 %{_infodir}/frr.info.gz
656 %exclude %{_sbindir}/ssd
690 %{_libdir}/frr
/modules
/pathd_pcep.so
692 %{_libdir}/libfrr.so
*
693 %{_libdir}/libfrrcares
*
694 %{_libdir}/libfrrospf
*
696 %{_libdir}/frr
/modules
/zebra_fpm.so
698 %{_libdir}/frr
/modules
/zebra_cumulus_mlag.so
699 %{_libdir}/frr
/modules
/dplane_fpm_nl.so
700 %{_libdir}/frr
/modules
/zebra_irdp.so
701 %{_libdir}/frr
/modules
/bgpd_bmp.so
703 %config(noreplace
) %{configdir}/[!v
]*.conf
*
704 %config(noreplace
) %attr(750,%{frr_user},%{frr_user}) %{configdir}/daemons
705 %if "
%{initsystem}"
== "systemd"
706 %{_unitdir}/frr.service
710 %config(noreplace
) %{_sysconfdir}/pam.d
/frr
711 %config(noreplace
) %{_sysconfdir}/logrotate.d
/frr
712 %{_sbindir}/frr
-reload
713 %{_sbindir}/frrcommon.sh
714 %{_sbindir}/frrinit.sh
715 %{_sbindir}/watchfrr.sh
723 %{_sbindir}/generate_support_bundle.py
724 %{_sbindir}/frr
-reload.py
725 %{_sbindir}/frr_babeltrace.py
726 %if 0%{?rhel} > 7 || 0%{?fedora} > 29
727 %{_sbindir}/__pycache__
/*
729 %{_sbindir}/generate_support_bundle.pyc
730 %{_sbindir}/generate_support_bundle.pyo
731 %{_sbindir}/frr
-reload.pyc
732 %{_sbindir}/frr
-reload.pyo
733 %{_sbindir}/frr_babeltrace.pyc
734 %{_sbindir}/frr_babeltrace.pyo
739 # add rpki module to daemons
740 sed
-i
-e 's
/^\
(bgpd_options
=\
)\
(.
*\
)\
(".
*\
)/\
1\
2 -M rpki\
3/'
%{_sysconfdir}/frr
/daemons
743 # remove rpki module from daemons
744 sed
-i 's
/ -M rpki
//'
%{_sysconfdir}/frr
/daemons
747 %{_libdir}/frr
/modules
/bgpd_rpki.so
751 %{_libdir}/libfrrsnmp.so
*
752 %{_libdir}/frr
/modules
/*snmp.so
757 %dir %{_includedir}/%{name}
758 %{_includedir}/%{name}/*.h
759 %dir %{_includedir}/%{name}/ospfd
760 %{_includedir}/%{name}/ospfd
/*.h
762 %dir %{_includedir}/%{name}/bfdd
763 %{_includedir}/%{name}/bfdd
/bfddp_packet.h
766 %dir %{_includedir}/%{name}/ospfapi
767 %{_includedir}/%{name}/ospfapi
/*.h
770 %dir %{_includedir}/%{name}/eigrpd
771 %{_includedir}/%{name}/eigrpd
/*.h
776 * Tue Nov
4 2021 Martin Winter
<mwinter@opensourcerouting.org
> - %{version}
778 * Tue Nov
2 2021 Jafar Al
-Gharaibeh
<jafar@atcorp.com
> - 8.1
779 - FRR
8.1 brings a long list of enhancements and fixes with
1200 commits from
780 - 75 developers. Thanks to all contributers.
782 - Lua hooks are now feature complete
, with one hook available
for use
(http
://docs.frrouting.org
/en
/latest
/scripting.html
)
783 - Improvements to SRv6
(Segment Routing over IPv6
) (http
://docs.frrouting.org
/en
/latest
/zebra.html
#segment-routing-ipv6)
784 - Improvements to
Prefix-SID
(Type
5)
785 - EVPN route
type-5 gateway IP overlay Index
(http
://docs.frrouting.org
/en
/latest
/bgp.html
#evpn-overlay-index-gateway-ip)
786 - OSPFv3 NSSA and NSSA totally stub areas
(http
://docs.frrouting.org
/en
/latest
/ospf6d.html
#ospf6-area)
787 - OSPFv3 ASBR summarization
(http
://docs.frrouting.org
/en
/latest
/ospf6d.html
#asbr-summarisation-support-in-ospfv3)
788 - OSPFv3 Graceful Restart
(http
://docs.frrouting.org
/en
/latest
/ospf6d.html
#graceful-restart)
789 - OSPFv2 Graceful Restart
(restarting mode added
, helper was already implemented
) (http
://docs.frrouting.org
/en
/latest
/ospfd.html
#graceful-restart)
791 - Every node
in running config now has an explicit "
exit" tag
792 - Link bandwidth
in BGP is now correctly encoded according to IEEE
754. To stay with old incorrect encoding use
:
793 - `neighbor PEER disable
-link
-bw
-encoding
-ieee`
796 Fix path
for daemons file
install
798 - Add "json" option to "show bgp as
-path
-access
-list"
799 - Add `disable
-addpath
-rx` knob
800 - Add an ability to
set extcommunity to none
in route
-maps
801 - Add counter of displayed show bgp summary when filtering
802 - Add knob to config cond
-adv scanner period
803 - Add route
-map `match
alias`
command
804 - Add rpki
source address configuration
805 - Add show bgp summary filter by neighbor or as
806 - Add terse display option on show bgp summary
807 - Allow
for auto
-completion of community
alias's created
808 - Bgp knob to teardown session immediately when peer is unreachable
809 - Expand 'bgp default
<afi
>-<safi
>' cmds
810 - Extend evpn next hop tracking to
type-1 and
type-4 routes
811 - Fix "no router bgp x vrf default"
812 - Flowspec redirect vrf uses vrf table instead of allocated table id
813 - Handle quick flaps of an evpn prefix properly
814 - Initial batch of evpn lttng tracepoints
815 - Limit processing to what is needed
in rpki validation
816 - Modify vrf
/view display
in show bgp summary
817 - Set
4096 instead of
65535 as new max packet size
for a new peer
818 - Set extended msg size only
if we advertised and received capability
819 - Show bgp community
alias in json community list output
820 - Show bgp prefixes by community
alias
821 - Show max packet size per update
-group
822 - Split soft reconfigure table task into several
jobs to not block vtysh
823 - Store distance received from a redistribute statement
824 - Update route
-type-1 legend to match output
826 - Fix sending of lsp with null seqno
828 - Add "json" option to "show ip
[v6
] access
-list"
829 - Add "json" option to "show ip
[v6
] prefix
-list"
830 - Add "json" option to "show route
-map"
831 - Prevent grpc assert on missing yang node
833 - Clear cache when shortcuts are cleared
834 - Fix corrupt address being shown
for shortcuts with no cache entry
835 - Set prefix correctly
in resolution request
837 - Add debug commands
for lsa all and route all
838 - Add warning log
for late hello packets
839 - Add write
-multiplier configuration
840 - Don't update router
-id
if at least one adjacency is full
841 - Extend the "redistribute"
command with more options
842 - Fix issue when displaying the redistribute
command
843 - Fix logging of border router routes
844 - Json output
for database dump show
command
845 - Link state id
in lsa database json output
846 - Send lsa update immediately when ospf instance is deleted
848 - Fix crash when creating vlink
in unknown vrf
849 - Gr conformance fix
for hello packet dr election
850 - Print extra lsa information
in some log messages
851 - Rfc conformance
test case 25.23 issue fix
852 - Show ip ospf route json does not shown metric and tag
853 - Summary lsa is not originated when process is reset
855 - Handle pcinitiated configuration
, main thread
856 - Handle pcinitiated messages
, thread controller
857 - Handle srp_id correctly
858 - If pce ret no
-path to pcreq don't retry pcreq nor delegate
860 - Add `match ip
-protocol
[tcp|udp
]`
861 - Add ability to
set/unset src and dest ports
862 - Nhg "add" edge
case for last
in table range
863 - Start inclusion of src and dst ports
for pbrd
865 - Add tos
/ttl check
for igmp conformance
866 - Allow join prune intervals to be as small as
5 seconds
867 - Allow msdp group name 'default'
868 - Fix register suppress timer code
869 - Fix uaf
/heap corruption
in bsm code
870 - Fix
command "no ip msdp mesh
-group member"
871 - Igmp groups are not getting timeout
872 - Igmp memberships are not querier specific
873 - Igmp sockets need to be iface
-bound too
874 - Prevent uninited usage of nexthop
875 - Support msdp global timers configuration
877 - Add cli timestamp '
-t' flag
878 - Add error code
if daemon is not running
879 - Fix searching commands
in parent nodes
881 - Add msdp timer configuration
882 - Fix bgp multicast prefix
type
883 - Mark a couple of prefix
-list
/access
-list leafs as mandatory
884 - Move multicast prefix
type definition
885 - Replace an empty pattern with a zero
-length restriction
886 - Rework pim msdp mesh group
887 - Simplify msdp peer handling
889 - Add "json" option to "show interface"
890 - Various improvment to dataplane interface
891 - Add message counts
for `show zebra client`
892 - Add nhg id to show ip route json
893 - Add show
command for ra interface lists
894 - Fix ipv4 routes with ipv6 link
local next hops
install in fpm
895 - Handle bridge mac address update
in evpn contexts
896 - Move individual lines to table
in `show zebra client`
command
897 - Refresh vxlan evpn contexts
, when bridge interface goes up
898 - Update zl3vni when bridge link refreshed
in other namespaces
900 * Wed Jul
21 2021 Martin Winter
<mwinter@opensourcerouting.org
> - 8.0
902 - New daemon pathd
for segment routing
903 - EVPN Multihoming is now fully supported
904 - OSPFv3 now supports VRFs
905 - TI
-LFA has been implemented
in IS
-IS and OSPF
906 - Ability
for Zebra to dump netlink messages
in a human
-friendly format
907 - LDP gained SNMP support
908 - libyang minimun version is now
2.0
910 - Add `distribute
-list` commands
911 - Fix memory leak
in connected route handling
913 - Add support
for use of aliases with communities
914 - Add support of tcp
-mss
for neighbors
915 - Add support
for EVPN Multihoming
916 - Add ability to show BGP routes from a particular table version
917 - Add support
for for RFC
8050 (MRT add
-path
)
918 - Add SNMP support
for MPLS VPN
919 - Add `show bgp summary wide`
command to show more detailed output
921 - Add ability
for peer
-groups to have `ttl
-security hops` configured
922 - Add support
for conditional Advertisement
923 - Add support
for RFC
4271 Delay Open Timer
924 - Add a knob to not advertise
until route is installed
in fib
925 - Add BGP
-wide configuration
for graceful shutdown
926 - Add support
for RFC
8654 extended messages
927 - Improve RPKI reporting as well as new show commands
928 - Improve handling of VRF route leaking
929 - Improve scaling behavior
for dynamic neighbors
930 - Improve LL nexthop tracking to be interface based
931 - Improve route reachability handling with respect to blackhole routes
932 - Improve SNMP traps to RFC
4273 notifications
933 - Improve EVPN routes to use L3 NHG's where applicable
934 - Improvements to EVPN
935 - Improvements to update behavior
936 - Fix various issues with connection resolution
937 - Fix statistics commands
in some situations
938 - Fix non
-determistic locally
-originated paths
in bestpath selection
939 - Continue working on transitioning to YANG
/Northbound configuration
940 - Various bug fixes and performance improvements
942 - Add `distribute
-list` commands
943 - Ensure received AS number is the same as ours
in all situations
944 - Properly validate TLV lengths
in some situations
946 - Add ldb
-sync functionality
947 - Add TI
-LFA functionality
948 - Add support
for Anycast
-SID's
949 - Add support
for classic LFA RFC
5286
950 - Add `show isis fast
-reroute summary`
command
951 - Add support
for Remote LFA RFC
7490
952 - Fix Attach
-bit processing
in some scenarios
953 - Cleanup BFD integration
954 - Various bug fixes and performance improvements
957 - Support
for LDP IGP Synchronization
958 - Support
for RLFA clients
959 - Various bug fixes and performance improvements
961 - Various bugfixes and performance improvements
963 - Add `nhrp multicast
-nflog
-group
(1-65535)`
command
964 - Add configuration options
for vici socket path
965 - Add support
for forwarding multicast packets
966 - Fix handling of MTU
967 - Fix handling of NAT extension
968 - Retry IPsec under some conditions
970 - Add OSPF GR helper support
971 - Add JSON support
for various commands
972 - Add `summary
-address A.B.C.D
/M ...` commands
973 - Add `area X nssa suppress
-fa`
command
974 - Add support
for TI
-LFA
975 - Add support
for BFD profiles
976 - Add support
for Traffic Engineering database
977 - Add support
for usage of DMPVPN with OSPF
978 - Add `clear ip ospf neighbor` commands
979 - Add YANG support
for route
-maps
980 - Improvements to SNMP
981 - Fixes
for type 5 and
type 7 LSA handling
982 - Various bug fixes and performance improvements
984 - Add support
for VRFs
985 - Add JSON support to a bunch of commands
986 - Add ability to control maximum paths
for routes
987 - Add `show ipv6 ospf6 vrfs`
command
988 - Add support
for BFD profiles
989 - Fix to not send hellos on loopbacks
990 - Cleanup area handling around interfaces
991 - YANG support
for route
-maps
992 - Various bug fixes and performance improvements
994 - Cleanup trust of user input
996 - Add support of SR
-TE policy management daemon
997 - Add optional support
for PCEP to pathd
998 - Integrate PCEP
-LIB into FRR
1000 - Add `
set installable` nhg
command
1001 - Improve interface up
/down event handling
1003 - Add YANG integration
1004 - Add JSON support to various commands
1005 - Add BFD profile support
1006 - Fixes to IGMP conformance
1007 - Fixes to behavior surrounding Prune and Prune
-pending
1008 - Various bug fixes and performance improvements
1010 - Fix interface wakeup after shutdown
1012 - Add ability to use Nexthop Groups
1013 - Add v4 redistribute watching
1017 - Fix nexthop handling
in some situations
1018 - Forbid blackhole and non
-blackhole nexthops
in a single route
1020 - printf formatting cleanups
1022 - Add a `show
history`
command
1023 - Add `show memory
<daemon
>` support
1024 - Start deprecation cycle
for `address
-family evpn`
1025 - Display version with
--help
1030 - Add JSON support to various commands
1031 - Add Human readable netlink dumps
1032 - Add L2 NHG support
1033 - Add support
for LSPs to FPM dataplane
1034 - Add ability
for other protocol daemons to
install nexthop groups into the kernel
1035 - Add YANG support
for route
-maps
1036 - Improve scale performance when handling a large number of VRF's
1037 - Improve network namespace handling
1038 - Improve asic
-offload handling
1039 - Improve FreeBSD interface and route handling
1040 - Improve handling of neighbors
in kernel dataplane plugin
1041 - Improve label manager
1042 - Improve route
-map processing
1043 - Improve debug
-ability of routes and VRFs
1044 - Improve FPM dataplane plugin
1045 - Improve handling of reachability
/ nexthop tracking on shutdown interfaces
1046 - Improve EVPN support
1047 - Fix startup handling of `
set src X`
1048 - Various bug fixes and performance improvements
1050 * Wed Mar
3 2021 Martin Winter
<mwinter@opensourcerouting.org
> - 7.5.1
1052 - Fix connected route leak on change
1054 - Session lookup was sometimes wrong
1055 - Memory leak and handling cleanups
1056 - In some situations handle vrf appropriately when receiving packets
1058 - Peer
Group Inheritance Fixes
1059 - Dissallow attempt to peer peers reachable via blackholes
1060 - Send BMP down message when reachability fails
1061 - Cleanup handling of aggregator data when the AGG AS is
0
1062 - Handle `neighbor
<peer
-group allowas
-in` config changes properly
1063 - Properly parse community and lcommunity values
in some circumstances
1064 - Allow peer
-groups to configure `ttl
-security hops`
1065 - Prevent v6 routes with v4 nexthops from being installed
1066 - Allow `default
-originate` to be cleared from a peer group
1067 - Fix evpn route
-map vni filter at origin
1068 - local routes were using non
-default distance
1069 - Properly track
if the nexthop was updated
in some circumstances
1070 - Cleanup `show running` when running bgp with `
-e X` values
1071 - Various Memory leaks
in show commands
1072 - Properly withdraw exported routes when deleting a VRF
1073 - Avoid resetting ebgp
-multihop
if peer setting is the same as peer
-group
1074 - Properly encode flowspec rules to zebra
in some rare circumstances
1075 - Generate statistics
for routes
in bgp when we have exactly
1 route
1076 - Properly apply route
-map
for the default
-originate
command
1078 - Properly
set MTU
for eigrp packets sent
1079 - Various memory leaks and using uninited data fixes
1081 - When last area address is removed
, resign
if we were the DR
1082 - Various memory leaks and using uninited data fixes
1084 - Various memory leaks and using uninited data fixes
1086 - Use onlink routes when prefix
== nh
1087 - Shortcut routes are installed with proper nexthop
1089 - Prevent duplicate packet
read in multiple vrf situation
1090 - Fix area removal at interface level
1091 - Restore Point to MultiPoint interface types
1092 - Correctly handle MTU change on startup
1093 - Multi Instance initialization sometimes was not successful
1094 - NSSA translate
-always was not working properly
1096 - Don't send hellos on loopback interfaces
1097 - Handle ECMP better when a sub
-path is removed
1098 - Memory leak and handling fixes
1099 - Fix Link LSA not updating when router priority is modified
1100 - Some output from show commands was wrong
1101 - Intra area remote connected prefixes sometimes not installed
1103 - Various memory leaks and using uninited data fixes
1105 - SGRpt prune received during prune didn't override holdtime
1106 - Various memory leaks and using uninited data fixes
1108 - Fix VRF and usage on startup
in some instances
1109 - Tableid was being mishandled
in some cases
1111 - Disable bracketed paste
in readline.
1113 - Various memory leaks and using uninited data fixes
1115 - Always
install blackhole routes using kernel routes instead of nexthops
1116 - Various memory leaks and using uninited data fixes
1117 - Dissallow resolution to duplicate nexthops that created infinite nexthops
1118 - Apply the route
-map delay
-timer globally
1119 - Some routes were stuck
in Queued state when using the FPM
1120 - Better handle vrf creation when using namespaces
1121 - Set NUD_NOARP on sticky mac entries
in addtion to NTF_STICKY
1122 - Allow `
set src X` to work on startup
1124 - Fix a variety of memory leaks
1125 - Fix VRF Creation
in some instances
1126 - RPKI context editing was not properly handled
in reload situations
1127 - routemap code was not properly handling modification of CLI
in some instances
1129 - Update to using rtrlib
0.7.0
1130 - Fix passthrough path
for Libyang
1.x
1132 - Remove old docker deps
1134 * Mon Nov
2 2020 Donald Sharp
<sharpd@nvidia.com
> - 7.5
1137 - Minimum ttl support
1141 - Add wide option to display of routes
1142 - Add `maximum
-prefix
<num
> force`
1143 - Add `bestpath
-routes` to neighbor
command
1144 - Add `bgp shutdown message MSG...`
command
1145 - Add v6 Flowspec support
1146 - Add `neighbor
<neigh
> shutdown rtt`
command
1147 - Allow update
-delay to be applied globaly
1149 - Beginning of MultiHoming Support
1151 - Segment Routing Support
1153 - Guard against adj timer display overflow
1154 - Add support
for Anycast
-SIDs
1155 - Add support
for Topology Independent LFA
(TI
-LFA
)
1156 - Add `lsp
-gen
-interval
2` to isis configuration
1158 - Segment Routing support
for ECMP
1160 - Prevent crash
if transferring config amongst instances
1162 - Adding json support to commands
1163 - DSCP
/ECN based PBR Matching
1165 - Add more json support to commands
1166 - Fix missing mesh
-group commands
1167 - MSDP SA forwarding
1168 - Clear
(s
,g
,rpt
) ifchannel on
(*, G
) prune received
1169 - Fix igmp querier election and IP address mapping
1170 - Crash fix when RP is removed
1172 - Northbound Support
1174 - Filter and route
-map Support
1175 - OSPF model definition
1176 - BGP model definition
1178 - Speed up output across daemons
1179 - Fix build
-time errors
for some
--enable flags
1180 - Speed up output of configuration across daemons
1182 - nexthop group support
for FPM
1183 - northbound support
for rib model
1184 - Backup nexthop support
1185 - netlink batching support
1186 - Allow upper level protocols to request ARP
1187 - Add json output
for zebra ES
, ES
-EVI and access vlan dumps
1189 - Upgrade to using libyang1.0
.184
1192 - Moved RPKI to subpackage
1193 - Added SNMP subpackage
1195 - As always there are too many bugfixes to list individually. This release
1196 - compromises just over
1k of commits by the community
, with contributors from
1199 * Tue Jun
30 2020 Martin Winter
<mwinter@opensourcerouting.org
> - 7.4
1201 - Use sequence numbers
for community lists
1202 - Fixes to nexthop groups
1203 - Add feature to limit outgoing number of routes
1204 - Per Neighbor Graceful Restart
1205 - Multiple Graceful Restart fixes
1206 - Support sub
-Type
-4 and sub
-Type
-5 for the VPNv4 SRv6 backend
1207 - rfc7606 support
: treat certain malformed routes as withdraw
1208 - allow origin override
for route aggregates
1209 - rfc6608 support
: Subcodes
for BGP Finite State Machine Error
1210 - rfc7607 support
: Codification of AS
0 Processing
1211 - rfc6286 support
: Autonomous
-System
-Wide Unique BGP Identifier
for BGP
-4
1212 - Unequal cost multipath
(a.ka. weighted ECMP
) with BGP link
-bandwidth
1213 - Enable rfc8212 by default except datacenter profile
1217 - Add copy
command to copy config from file into running config
1219 - adding support
for LDP ordered label distribution control
1221 - IS
-IS Segment Routing support
1223 - add initial support to add
/remove lsps
1225 - fix broadcast address
in IPv4 networks with
/31 mask
1226 - Add Graceful Restart support
for Protocol Daemon restarts
1228 - migrate route
-maps to use northbound interface
1229 - plus countless bug fixes and other improvements
1231 * Mon Jun
15 2020 Sascha Kattelmann
<sascha@netdef.org
>
1234 * Wed May
06 2020 David Lamparter
<equinox@opensourcerouting.org
> - 7.3.1
1237 * Fri Feb
14 2020 Martin Winter
<mwinter@opensourcerouting.org
> - 7.3
1240 - Route Aggregation code speed ups
1241 - BGP Vector I
/O speed ups
1242 - New CLI
: `
set distance XXX`
1243 - New CLI
: `aggregate
-address A.B.C.D
/M route
-map WORD`
1244 - New CLI
: `bgp reject
-as
-sets`
1245 - New CLI
: `advertise pip ...`
1246 - New CLI
: `match evpn rd ASN
:NN_OR_IP
-ADDRESS
:NN`
1247 - New CLI
: `show bgp l2vpn evpn community|large
-community X`
1248 - New CLI
: `show bgp l2vpn evpn A.B.C.D`
1249 - Auto
-completion
for clear bgp
command
1250 - Add ability to
set tcp socket buffer size
1252 - Partial MPLS TE support
1254 - New CLI
: `
set vrf unchanged|NAME`
1257 - New CLI
: 'show bfd peers brief'
1258 - New CLI
: 'clear bfd peer ...'
1260 - Significant Speedups
in accessing Internal Data
for higher scale
1261 - Support
for joining any
-source Multicast
1262 - Updated CLI
: 'show ip pim upstream
-join
-desired'
1263 - New CLI
: 'show ip pim channel'
1265 - MLAG experimental support
1268 - Northbound Conversion
- NHRPd
1271 - New CLI
: `banner motd line LINE...`
1273 - New CLI
: `show yang operational
-data XPATH`
1274 - New CLI
: `debug northbound`
1276 - Nexthop
Group support
1277 - New CLI
: 'debug zebra nexthop
[detail
]'
1278 - New CLI
: 'show router
-id'
1279 - MLAG experimental support
1281 - Additional status messages of system state to systemd
1282 - New CLI
: `watchfrr ignore DAEMON`
1284 - As always all daemons have received too many bug fixes to fully list
1285 - There has been a significant focus on increasing
test coverage
1286 - Change
in Behavior
:
1288 - All areas created default automatically to level
-1-2
1290 - Nexthop
Group Installation
in Kernel is turned on by default
1291 if the kernel supports
- New CLI
: 'show nexthop
-group rib
[singleton
]'
1293 - Renamed to frr
-* to remove collision with other packages
1295 * Fri Jan
17 2020 Martin Winter
<mwinter@opensourcerouting.org
> - 7.2.1
1298 - Do not apply eBGP policy
for iBGP peers
1299 - Show `ip` and `fqdn`
in json output
for `show
[ip
] bgp
<route
> json`
1300 - Fix large route
-distinguisher's format
1301 - Fix `no bgp listen range ...` configuration
command
1302 - Autocomplete neighbor
for clear bgp
1303 - Reflect the distance
in RIB when it is changed
for an arbitrary afi
/safi
1304 - Notify "Peer De
-configured" after entering 'no neighbor
<neighbor
> cmd
1305 - Fix per afi
/safi addpath peer counting
1306 - Rework BGP dampening to be per AFI
/SAFI
1307 - Do not send next
-hop as
:: in MP_REACH_NLRI
if no link
-local exists
1308 - Override peer's TTL only
if peer
-group is configured with TTL
1309 - Remove error message
for unkown afi
/safi combination
1310 - Keep the session down
if maximum
-prefix is reached
1312 - Fix BFD down not tearing down OSPF adjacency
for point
-to
-point net
1314 - Fix multiple VRF handling
1315 - VRF security improvement
1319 - Make sure `no ip nhrp map
<something
>` works as expected
1321 - Add missing sanity check
in the parsing of label messages
1323 - Use correct state when installing evpn macs
1324 - Capture dplane plugin flags
1326 - Fix interface config when vrf changes
1327 - Fix Interface Infinite Loop Walk
(for special interfaces such as bond
)
1329 - fix missing vrrpd daemon
1331 - Rename man pages
(to avoid conflicts with other packages
)
1332 - Various other fixes
for code cleanup and memory leaks
1334 * Fri Dec
27 2019 Donatas Abraitis
<donatas.abraitis@gmail.com
>
1335 - Add CentOS
8 support
1337 * Tue Oct
15 2019 Martin Winter
<mwinter@opensourcerouting.org
> - 7.2
1339 - -N
<namespace
> to allow
for config file locating when running FRR inside
1341 - Impoved Testing across all daemons
1344 - Conversion to Northbound interface
1346 - Aggregate
-address add route
-map support
1348 - Improved JSON output
for many commands
1349 - `show bgp afi safi summary failed`
command
1350 - `clear bop
*` clears all peers
1351 - Show FQDN
for `show bgp ipv4 uni` commands
1352 - Display BestPath selection reason as part of show commands
1354 - Infrastructure changes to allow VRF's
1355 - SIGHUP signals the config reload
1356 - Conversion to Northbound interface
1359 - Support
for circuits with MTU
> 8192
1361 - fwmark support as part of match criteria
1362 - autocompletion of PBRMAPS
1363 - Improved Nexthop Support
1365 - PIM
-BSM receive support
1366 - Improved debugging support
1367 - Store ECMP paths that are not currently legal
for use
1368 - Disallow igmp query from a non
-connected
source
1369 - Many new cli improvements and changes
1371 - Add Support
for RFC
3768 and RFC
5798
1373 - Add sequence numbers to access
-lists
1374 - Add `match ip next
-hop
type blackhole`
1375 - Improved ability to notice dependency changes
1377 - `sharp watch
[import|nexthop
]` you can now specify a prefix instead
1380 - Significantly Improved NHT
1382 - Many dataplane improvements
for routes
, neighbor table and EVPN
1383 - NHT cli can now be specified per VRF and improved ability to control
1384 NHT data being shown
1385 - Removed duplicate processing of routes
1386 - Improved debugablility
1387 - RMAC and VxLan support
for the FPM
1390 - Nexthop
Group Improvements
1391 - `log
-filter WORD` added
1394 - libcap should be used as part of build or significant slowdowns
1396 - Lua builds have been fixed
1397 - Improved Cross building
1399 * Mon Jun
17 2019 David Lamparter
<equinox@opensourcerouting.org
> - 7.1
1400 - gRPC northbound plugin
1401 - "table NNN" removed from zebra
1402 - more dataplane MT work
1403 - EVPN
in non
-default VRFs
1404 - RFC
8212 (default deny policy
for eBGP
)
1405 - RFC
8106 (IPv6 RA DNS options
)
1407 * Wed May
8 2019 Martin Winter
<mwinter@opensourcerouting.org
> - 7.0.1
1409 - Don't send Updates with BGP Max
-Prefix Overflow
1410 - Make sure `next
-hop
-self all` backward compatible with force
1411 - Fix as
-path validation
in "show bgp regexp"
1412 - Fix interface
-based peers to override peergroups
1413 - Fix removing private AS numbers
if local-as is used
1414 - Fix show bgp labeled_unicast
1415 - Add
command to lookup prefixes
in rpki table
1416 - Fix peer count
in "show bgp ipv6 summary"
1417 - Add missing ipv6 only peer flag action
1418 - Fix address family output
in "show bgp
[ipv4|ipv6
] neighbors"
1419 - Add missing checks
for vpnv6 nexthops
1420 - Fix nexthop
for ipv6 vpn
case
1421 - rip
: Fix removal of passive interfaces
1423 - Fix json timer output
1424 - Fix milliseconds
in json output
1426 - Fix
source port according RFC
5881, Sec
4
1427 - Fix IPv6 link
-local peer removal
1428 - Fix interface clean up when deleting interface
1429 - pim
: Fix interface clean up when deleting interface
1430 - nhrp
: Fix interface clean up when deleting interface
1432 - Workaround to get FRR building with libyang
0.x and
1.x
1433 - Fix
in priv handling
1434 - Make priv elevation thread
-safe
1436 - Pseudowire event recovery
1437 - Fix race condition
in label manager
1438 - Fix system routes selection and next
-hop tracking
1439 - Set connected route metric based on devaddr metric
1440 - Display metric
for connected routes
1441 - Add selected fib details to json output
1442 - Always use replace
if installing new route
1443 - watchfrr
: Silently ignore
declare failures
(for backward compatibility
)
1444 - RPM packages
: Switch to new init script
1446 * Thu Feb
28 2019 Martin Winter
<mwinter@opensourcerouting.org
> - 7.0
1447 - Added libyang dependency
: New work
for northbound interface based on libyang
1448 - Fabricd
: New Daemon based on https
://datatracker.ietf.org
/doc
/draft
-white
-openfabric
/
1449 - various bug fixes and other enhancements
1451 * Sun Oct
7 2018 Martin Winter
<mwinter@opensourcerouting.org
> - 6.0
1452 - Staticd
: New daemon responsible
for management of static routes
1453 - ISISd
: Implement dst
-src routing as per draft
-ietf
-isis
-ipv6
-dst
-src
-routing
1454 - BFDd
: new daemon
for BFD
(Bidrectional Forwarding Detection
). Responsible
1455 for notifying link changes to
make routing protocols converge faster.
1458 * Thu Jul
5 2018 Martin Winter
<mwinter@opensourcerouting.org
> - 5.0.1
1459 - Support Automake
1.16.1
1460 - BGPd
: Support
for flowspec ICMP
, DSCP
, packet length
, fragment and tcp flags
1461 - BGPd
: fix rpki validation
for ipv6
1462 - VRF
: Workaround
for kernel bug on Linux
4.14 and newer
1463 - Zebra
: Fix interface based routes from zebra not marked up
1464 - Zebra
: Fix large zebra memory usage when redistribute between protocols
1465 - Zebra
: Allow route
-maps to match on
source instance
1466 - BGPd
: Backport peer
-attr overrides
, peer
-level enforce
-first
-as and filtered
-routes fix
1467 - BGPd
: fix
for crash during display of filtered
-routes
1468 - BGPd
: Actually display labeled unicast routes received
1469 - Label Manager
: Fix to work correctly behind a label manager proxy
1471 * Thu Jun
7 2018 Martin Winter
<mwinter@opensourcerouting.org
> - 5.0
1472 - PIM
: Add a Multicast Trace Command draft
-ietf
-idmr
-traceroute
-ipm
-05
1473 - IS
-IS
: Implement Three
-Way Handshake as per RFC5303
1474 - BGPD
: Implement VPN
-VRF route leaking per RFC4364.
1475 - BGPD
: Implement VRF with NETNS backend
1477 - PBRD
: Add a new Policy Based Routing Daemon
1479 * Mon May
28 2018 Rafael Zalamena
<rzalamena@opensourcerouting.org
>
1482 * Sun May
20 2018 Martin Winter
<mwinter@opensourcerouting.org
>
1483 - Fixed RPKI RPM build
1485 * Sun Mar
4 2018 Martin Winter
<mwinter@opensourcerouting.org
>
1486 - Add option to build with RPKI
(default
: disabled
)
1488 * Tue Feb
20 2018 Martin Winter
<mwinter@opensourcerouting.org
>
1489 - Adapt to new documentation structure based on Sphinx
1491 * Fri Oct
20 2017 Martin Winter
<mwinter@opensourcerouting.org
>
1492 - Fix script location
for watchfrr restart functions
in daemon config
1493 - Fix postun script to restart frr during upgrade
1495 * Mon Jun
5 2017 Martin Winter
<mwinter@opensourcerouting.org
>
1496 - added NHRP and EIGRP daemon
1498 * Mon Apr
17 2017 Martin Winter
<mwinter@opensourcerouting.org
>
1499 - new subpackage frr
-pythontools with python
2.7 restart script
1500 - remove PIMd from CentOS
/RedHat
6 RPM packages
(won't work
- too old
)
1501 - converted to single frr init script
(not per daemon
) based on debian init script
1502 - created systemd service file
for systemd based systems
(which uses init script
)
1503 - Various other RPM package fixes
for FRR
2.0
1505 * Fri Jan
6 2017 Martin Winter
<mwinter@opensourcerouting.org
>
1506 - Renamed to frr
for FRRouting fork of Quagga
1508 * Thu Feb
11 2016 Paul Jakma
<paul@jakma.org
>
1509 - remove with_ipv6 conditionals
, always build v6
1510 - Fix UTF
-8 char
in spec changelog
1511 - remove quagga.pam.stack
, long deprecated.
1513 * Thu Oct
22 2015 Martin Winter
<mwinter@opensourcerouting.org
>
1514 - Cleanup configure
: remove
--enable-ipv6
(default now
), --enable-nssa
,
1516 - Remove support
for old fedora
4/5
1517 - Fix
for package nameing
1518 - Fix Weekdays of previous changelogs
(bogus dates
)
1519 - Add conditional logic to only build tex footnotes with supported texi2html
1520 - Added pimd to files section and fix double listing of
/var
/lib
*/quagga
1521 - Numerous fixes to unify upstart
/systemd startup into same spec file
1522 - Only allow use of watchfrr
for non
-systemd systems. no need with systemd
1524 * Fri Sep
4 2015 Paul Jakma
<paul@jakma.org
>
1526 - add a default define
for with_pimd
1528 * Mon Sep
12 2005 Paul Jakma
<paul@dishone.st
>
1529 - Steal some changes from Fedora spec file
:
1530 - Add with_rtadv variable
1531 - Test
for groups
/users with getent before group
/user adding
1532 - Readline need not be an explicit prerequisite
1533 - install-info delete should be postun
, not preun
1535 * Wed Jan
12 2005 Andrew J. Schorr
<ajschorr@alumni.princeton.edu
>
1536 - on package upgrade
, implement careful
, phased restart logic
1537 - use gcc
-rdynamic flag when linking
for better backtraces
1539 * Wed Dec
22 2004 Andrew J. Schorr
<ajschorr@alumni.princeton.edu
>
1540 - daemonv6_list should contain only IPv6 daemons
1542 * Wed Dec
22 2004 Andrew J. Schorr
<ajschorr@alumni.princeton.edu
>
1544 - on upgrade
, all daemons should be condrestart'ed
1545 - on removal
, all daemons should be stopped
1547 * Mon Nov
08 2004 Paul Jakma
<paul@dishone.st
>
1548 - Use makeinfo
--html to generate quagga.html
1550 * Sun Nov
07 2004 Paul Jakma
<paul@dishone.st
>
1551 - Fix with_ipv6
set to
0 build
1553 * Sat Oct
23 2004 Paul Jakma
<paul@dishone.st
>
1556 * Sat Oct
23 2004 Andrew J. Schorr
<aschorr@telemetry
-investments.com
>
1557 - Make directories be owned by the packages concerned
1558 - Update logrotate scripts to use correct path to killall and use pid files
1560 * Fri Oct
08 2004 Paul Jakma
<paul@dishone.st
>
1563 * Wed Sep
15 2004 Paul Jakma
<paul@dishone.st
>
1564 - build snmp support by default
1565 - build irdp support
1566 - build with shared libs
1567 - devel subpackage
for archives and headers
1569 * Thu Jan
08 2004 Paul Jakma
<paul@dishone.st
>
1570 - updated sysconfig files to specify
local dir
1571 - added ospf_dump.c crash quick fix patch
1572 - added ospfd persistent interface configuration patch
1574 * Tue Dec
30 2003 Paul Jakma
<paul@dishone.st
>
1576 - integrate RH sysconfig patch to specify daemon options
(RH
)
1577 - default to have vty listen only to
127.1 (RH
)
1578 - add user with fixed UID
/GID
(RH
)
1579 - create user with shell
/sbin
/nologin rather than
/bin
/false
(RH
)
1580 - stop daemons on uninstall
(RH
)
1581 - delete info file on preun
, not postun to avoid deletion on upgrade.
(RH
)
1583 - cleanup tasks carried out
for every daemon
1585 * Sun Nov
2 2003 Paul Jakma
<paul@dishone.st
>
1586 - Fix
-devel package to include all files
1589 * Tue Aug
12 2003 Paul Jakma
<paul@dishone.st
>
1591 - Sync to Quagga release
0.96
1593 * Thu Mar
20 2003 Paul Jakma
<paul@dishone.st
>
1594 - zebra privileges support
1596 * Tue Mar
18 2003 Paul Jakma
<paul@dishone.st
>
1597 - Fix mem leak
in 'show thread cpu'
1598 - Ralph Keller's OSPF
-API
1599 - Amir
: Fix configure.ac
for net
-snmp
1601 * Sat Mar
1 2003 Paul Jakma
<paul@dishone.st
>
1602 - ospfd IOS prefix to interface matching
for 'network' statement
1603 - temporary fix
for PtP and IPv6
1604 - sync to zebra.org CVS
1606 * Mon Jan
20 2003 Paul Jakma
<paul@dishone.st
>
1607 - update to latest cvs
1608 - Yon's "show thread cpu" patch
- 17217
1609 - walk up tree
- 17218
1610 - ospfd NSSA fixes
- 16681
1611 - ospfd nsm fixes
- 16824
1612 - ospfd OLSA fixes and new feature
- 16823
1613 - KAME and ifindex fixes
- 16525
1614 - spec file changes to allow redhat files to be
in tree
1616 * Sat Dec
28 2002 Alexander Hoogerhuis
<alexh@ihatent.com
>
1617 - Added conditionals
for building with
(out
) IPv6
, vtysh
, RIP
, BGP
1618 - Fixed up some build requirements
(patch
)
1619 - Added conditional build requirements
for vtysh
/ snmp
1620 - Added conditional to files
for _bindir depending on vtysh
1622 * Mon Nov
11 2002 Paul Jakma
<paulj@alphyra.ie
>
1623 - update to latest CVS
1624 - add Greg Troxel's md5 buffer copy
/dup fix
1626 - add Frank's multicast flag fix
1628 * Wed Oct
09 2002 Paul Jakma
<paulj@alphyra.ie
>
1629 - update to latest CVS
1630 - timestamped crypt_seqnum patch
1631 - oi
->on_write_q fix
1633 * Mon Sep
30 2002 Paul Jakma
<paulj@alphyra.ie
>
1634 - update to latest CVS
1635 - add vtysh 'write
-config
(integrated|daemon
)' patch
1636 - always '
make rebuild'
in vtysh
/ to catch new commands
1638 * Fri Sep
13 2002 Paul Jakma
<paulj@alphyra.ie
>
1641 * Wed Sep
11 2002 Paul Jakma
<paulj@alphyra.ie
>
1642 - update to latest CVS
1643 - add "
/sbin
/ip route flush proto zebra" to zebra RH init on startup
1645 * Sat Aug
24 2002 Paul Jakma
<paulj@alphyra.ie
>
1646 - update to current CVS
1647 - add OSPF point to multipoint patch
1649 - add BGP
hash optimisation patch
1651 * Fri Jun
14 2002 Paul Jakma
<paulj@alphyra.ie
>
1652 - update to
0.93-pre1
/ CVS
1653 - add link state detection support
1654 - add generic PtP and RFC3021 support
1657 * Thu Aug
09 2001 Elliot Lee
<sopwith@redhat.com
> 0.91a
-6
1660 * Wed Aug
1 2001 Trond Eivind Glomsrød
<teg@redhat.com
> 0.91a
-5
1661 - Use generic initscript strings instead of initscript specific
1662 ( "Starting foo
: "
-> "Starting $prog
:"
)
1664 * Fri Jul
27 2001 Elliot Lee
<sopwith@redhat.com
> 0.91a
-4
1665 - Bump the release when rebuilding into the dist.
1667 * Tue Feb
6 2001 Tim Powers
<timp@redhat.com
>
1668 - built
for Powertools
1670 * Sun Feb
4 2001 Pekka Savola
<pekkas@netcore.
fi>
1671 - Hacked up from PLD Linux
0.90-1, Mandrake
0.90-1mdk and one from zebra.org.
1673 - Very heavy modifications to init.d
/*, .spec
, pam
, i18n
, logrotate
, etc.
1674 - Should be quite Red Hat'isque now.