3 # Some can be overridden on rpmbuild commandline with:
4 # rpmbuild --define 'variable value'
5 # (use any value, ie 1 for flag "with_XXXX" definitions)
7 # E.g. rpmbuild --define 'release_rev 02' may be useful if building
8 # rpms again and again on the same day, so the newer rpms can be installed.
9 # bumping the number each time.
11 #################### FRRouting (FRR) configure options #####################
12 # with-feature options
13 %{!?with_babeld: %global with_babeld 1 }
14 %{!?with_bfdd: %global with_bfdd 1 }
15 %{!?with_bgp_vnc: %global with_bgp_vnc 0 }
16 %{!?with_cumulus: %global with_cumulus 0 }
17 %{!?with_eigrpd: %global with_eigrpd 1 }
18 %{!?with_fpm: %global with_fpm 1 }
19 %{!?with_ldpd: %global with_ldpd 1 }
20 %{!?with_multipath: %global with_multipath 256 }
21 %{!?with_nhrpd: %global with_nhrpd 1 }
22 %{!?with_ospfapi: %global with_ospfapi 1 }
23 %{!?with_ospfclient: %global with_ospfclient 1 }
24 %{!?with_pam: %global with_pam 0 }
25 %{!?with_pbrd: %global with_pbrd 1 }
26 %{!?with_pimd: %global with_pimd 1 }
27 %{!?with_pim6d: %global with_pim6d 0 }
28 %{!?with_vrrpd: %global with_vrrpd 1 }
29 %{!?with_rtadv: %global with_rtadv 1 }
30 %{!?with_watchfrr: %global with_watchfrr 1 }
31 %{!?with_pathd: %global with_pathd 1 }
34 %{!?frr_user: %global frr_user frr }
35 %{!?vty_group: %global vty_group frrvty }
38 %define configdir
%{_sysconfdir}/%{name}
39 %define _sbindir
/usr
/lib
/frr
40 %define zeb_src
%{_builddir}/%{name}-%{frrversion}
41 %define zeb_rh_src
%{zeb_src}/redhat
42 %define zeb_docs
%{zeb_src}/doc
43 %define frr_tools
%{zeb_src}/tools
45 # defines for configure
46 %define rundir
%{_localstatedir}/run/%{name}
48 ############################################################################
50 #### Version String tweak
51 # Remove invalid characters form version string and replace with _
52 %{expand: %%global rpmversion %(echo '@VERSION@' | tr [:blank:]- _ )}
53 %define frrversion @VERSION@
55 #### Check for systemd or init.d (upstart)
56 # Check for init.d (upstart) as used in CentOS 6 or systemd (ie CentOS 7)
57 %if 0%{?fedora} || 0%{?rhel} >= 7 || 0%{?suse_version} >= 1210
58 %global initsystem systemd
60 %if 0%{?rhel} && 0%{?rhel} < 7
61 %global initsystem upstart
63 %{expand: %%global initsystem %(if [[ `/sbin/init --version 2> /dev/null` =~ upstart ]]; then echo upstart; elif [[ `readlink -f /sbin/init` = /usr/lib/systemd/systemd ]]; then echo systemd; elif [[ `systemctl` =~ -\.mount ]]; then echo systemd; fi)}
67 # Check for python version - use python2.7 on CentOS 6, otherwise python3
68 %if 0%{?rhel} && 0%{?rhel} < 7
74 # If init system is systemd, then always enable watchfrr
75 %if "
%{initsystem}"
== "systemd"
76 %global with_watchfrr
1
79 #### Check for RedHat 6.x or CentOS 6.x - they are too old to support PIM.
80 #### Always disable it on these old systems unconditionally
82 # if CentOS / RedHat and version < 7, then disable PIMd (too old, won't work)
83 %if 0%{?rhel} && 0%{?rhel} < 7
88 # misc internal defines
89 %{!?frr_uid: %global frr_uid 92 }
90 %{!?frr_gid: %global frr_gid 92 }
91 %{!?vty_gid: %global vty_gid 85 }
93 %define daemon_list zebra ripd ospfd bgpd isisd ripngd ospf6d pbrd staticd bfdd fabricd pathd
96 %define daemon_ldpd ldpd
98 %define daemon_ldpd ""
102 %define daemon_pimd pimd
104 %define daemon_pimd ""
108 %define daemon_pim6d pim6d
110 %define daemon_pim6d ""
114 %define daemon_pbrd pbrd
116 %define daemon_pbrd ""
120 %define daemon_nhrpd nhrpd
122 %define daemon_nhrpd ""
126 %define daemon_eigrpd eigrpd
128 %define daemon_eigrpd ""
132 %define daemon_babeld babeld
134 %define daemon_babeld ""
138 %define daemon_vrrpd vrrpd
140 %define daemon_vrrpd ""
144 %define daemon_watchfrr watchfrr
146 %define daemon_watchfrr ""
150 %define daemon_bfdd bfdd
152 %define daemon_bfdd ""
156 %define daemon_pathd pathd
158 %define daemon_pathd ""
161 %define all_daemons
%{daemon_list} %{daemon_ldpd} %{daemon_pimd} %{daemon_pim6d} %{daemon_nhrpd} %{daemon_eigrpd} %{daemon_babeld} %{daemon_watchfrr} %{daemon_pbrd} %{daemon_bfdd} %{daemon_vrrpd} %{daemon_pathd}
163 #release sub-revision (the two digits after the CONFDATE)
164 %{!?release_rev: %global release_rev 01 }
166 Summary: Routing daemon
168 Version: %{rpmversion}
169 Release: %{release_rev}%{?dist}
171 Group: System Environment
/Daemons
172 Source0: https
://github.com
/FRRouting
/frr
/archive
/%{name}-%{frrversion}.tar.gz
173 URL: https
://www.frrouting.org
174 Requires(pre
): shadow
-utils
175 Requires(preun
): info
177 BuildRequires
: bison
>= 2.7
178 BuildRequires
: c
-ares
-devel
181 BuildRequires
: json
-c
-devel
182 BuildRequires
: libcap
-devel
184 BuildRequires
: ncurses
-devel
185 BuildRequires
: readline
-devel
186 BuildRequires
: texinfo
187 BuildRequires
: libyang2
-devel
188 %if 0%{?rhel} && 0%{?rhel} < 7
189 #python27-devel is available from ius community repo for RedHat/CentOS 6
190 BuildRequires
: python27
-devel
191 BuildRequires
: python27
-sphinx
194 BuildRequires
: python
-devel
>= 2.7
195 BuildRequires
: python
-sphinx
197 BuildRequires
: python3
-devel
198 BuildRequires
: python3
-sphinx
202 #platform-python-devel is needed for /usr/bin/pathfix.py
203 BuildRequires
: platform
-python
-devel
205 Requires: initscripts
207 BuildRequires
: pam
-devel
209 %if "
%{initsystem}"
== "systemd"
210 BuildRequires
: systemd
211 BuildRequires
: systemd
-devel
212 Requires(post
): systemd
213 Requires(preun
): systemd
214 Requires(postun
): systemd
216 Requires(post
): chkconfig
217 Requires(preun
): chkconfig
218 # Initscripts > 5.60 is required for IPv6 support
219 Requires(pre
): initscripts
>= 5.60
221 Provides: routingdaemon
= %{version}-%{release}
222 Obsoletes
: gated mrt zebra frr
-sysvinit
227 FRRouting is a free software that manages TCP
/IP based routing
228 protocol. It takes multi
-server and multi
-thread approach to resolve
229 the current complexity of the Internet.
231 FRRouting supports BGP4
, OSPFv2
, OSPFv3
, ISIS
, RIP
, RIPng
, PIM
, LDP
232 NHRP
, Babel
, PBR
, EIGRP and BFD.
234 FRRouting is a fork of Quagga.
238 Summary: contrib tools
for frr
239 Group: System Environment
/Daemons
242 Contributed
/3rd party tools which may be of use with frr.
246 Summary: python tools
for frr
247 %if 0%{?rhel} && 0%{?rhel} < 7
248 #python27 is available from ius community repo for RedHat/CentOS 6
249 BuildRequires
: python27
250 Requires: python27
-ipaddress
253 BuildRequires
: python2
254 Requires: python2
-ipaddress
256 BuildRequires
: python3
259 Group: System Environment
/Daemons
261 %description pythontools
262 Contributed python
2.7 tools which may be of use with frr.
266 Summary: Header and object files
for frr development
267 Group: System Environment
/Daemons
268 Requires: %{name} = %{version}-%{release}
271 The frr
-devel package contains the header and object files necessary
for
272 developing OSPF
-API and frr applications.
276 Summary: BGP RPKI support
(rtrlib
)
277 Group: System Environment
/Daemons
278 BuildRequires
: librtr
-devel
>= 0.8
279 Requires: %{name} = %{version}-%{release}
281 %description rpki
-rtrlib
282 Adds RPKI support to FRR's bgpd
, allowing validation of BGP routes
283 against cryptographic information stored
in WHOIS databases. This is
284 used to prevent hijacking of networks on the wider internet. It is only
285 relevant to internet service providers using their own autonomous system
290 Summary: SNMP support
291 Group: System Environment
/Daemons
292 BuildRequires
: net
-snmp
-devel
293 Requires: %{name} = %{version}-%{release}
296 Adds SNMP support to FRR's daemons by attaching to net
-snmp's snmpd
297 through the AgentX protocol.
Provides read-only access to current
298 routing state through standard SNMP MIBs.
302 %setup -q
-n frr
-%{frrversion}
307 # For standard gcc verbosity, uncomment these lines:
308 #CFLAGS="%{optflags} -Wall -Wsign-compare -Wpointer-arith"
309 #CFLAGS="${CFLAGS} -Wbad-function-cast -Wwrite-strings"
311 # For ultra gcc verbosity, uncomment these lines also:
312 #CFLAGS="${CFLAGS} -W -Wcast-qual -Wstrict-prototypes"
313 #CFLAGS="${CFLAGS} -Wmissing-declarations -Wmissing-noreturn"
314 #CFLAGS="${CFLAGS} -Wmissing-format-attribute -Wunreachable-code"
315 #CFLAGS="${CFLAGS} -Wpacked -Wpadded"
318 --sbindir
=%{_sbindir} \
319 --sysconfdir
=%{configdir} \
320 --localstatedir
=%{rundir} \
324 %if %{with_multipath}
325 --enable-multipath
=%{with_multipath} \
328 %if %{with_ospfclient}
329 --enable-ospfclient \
331 --disable
-ospfclient\
387 --enable-user
=%{frr_user} \
388 --enable-group
=%{frr_user} \
391 --enable-vty
-group
=%{vty_group} \
426 make %{?_smp_mflags} MAKEINFO
="makeinfo
--no
-split"
429 # Change frr-reload.py to use python2.7
430 sed
-e '
1c
#!/usr/bin/python2.7' -i %{zeb_src}/tools/frr-reload.py
431 sed
-e '
1c
#!/usr/bin/python2.7' -i %{zeb_src}/tools/generate_support_bundle.py
433 # Change frr-reload.py to use python3
434 sed
-e '
1c
#!/usr/bin/python3' -i %{zeb_src}/tools/frr-reload.py
435 sed
-e '
1c
#!/usr/bin/python3' -i %{zeb_src}/tools/generate_support_bundle.py
444 mkdir -p
%{buildroot}%{_sysconfdir}/{frr,sysconfig,logrotate.d,pam.d,default} \
445 %{buildroot}%{_infodir}
446 mkdir -m
0755 -p
%{buildroot}%{_localstatedir}/log
/frr
447 make DESTDIR
=%{buildroot} INSTALL
="
install -p" CP
="cp
-p"
install
449 # Remove this file, as it is uninstalled and causes errors when building on RH9
450 rm -rf
%{buildroot}/usr
/share
/info
/dir
452 # Remove debian init script if it was installed
453 rm -f
%{buildroot}%{_sbindir}/frr
455 # kill bogus libtool files
456 rm -vf
%{buildroot}%{_libdir}/frr
/modules
/*.la
457 rm -vf
%{buildroot}%{_libdir}/*.la
458 rm -vf
%{buildroot}%{_libdir}/frr
/libyang_plugins
/*.la
460 # install /etc sources
461 %if "
%{initsystem}"
== "systemd"
462 mkdir -p
%{buildroot}%{_unitdir}
463 install -m644
%{zeb_src}/tools/frr.service %{buildroot}%{_unitdir}/frr.service
465 mkdir -p
%{buildroot}%{_initddir}
466 ln
-s
%{_sbindir}/frrinit.sh %{buildroot}%{_initddir}/frr
469 install %{zeb_src}/tools/etc/frr/daemons %{buildroot}%{_sysconfdir}/frr
470 install %{zeb_src}/tools/etc/frr/frr.conf %{buildroot}%{_sysconfdir}/frr
/frr.conf.template
471 install -m644
%{zeb_rh_src}/frr.pam %{buildroot}%{_sysconfdir}/pam.d
/frr
472 install -m644
%{zeb_rh_src}/frr.logrotate %{buildroot}%{_sysconfdir}/logrotate.d
/frr
473 install -d
-m750
%{buildroot}%{rundir}
475 %if 0%{?rhel} > 7 || 0%{?fedora} > 29
476 # avoid `ERROR: ambiguous python shebang in` errors
477 pathfix.py
-pni "
%{__python3} %{py3_shbang_opts}" %{buildroot}/usr
/lib
/frr
/*.py
478 %py_byte_compile %{__python3} %{buildroot}/usr
/lib
/frr
/*.py
480 # remove ospfclient.py (if present) as it requires > python36
481 rm -f
%{buildroot}%{_sbindir}/ospfclient.py
487 getent group
%{vty_group} >/dev/null || groupadd -r -g %{vty_gid} %{vty_group}
490 # add frr user and group
492 # Ensure that frr_gid gets correctly allocated
493 getent group
%{frr_user} >/dev/null || groupadd -g %{frr_gid} %{frr_user}
494 getent passwd
%{frr_user} >/dev
/null || \
495 useradd
-r
-u
%{frr_uid} -g %{frr_user} \
496 -s
/sbin
/nologin
-c "FRRouting suite" \
497 -d
%{rundir} %{frr_user}
500 usermod
-a
-G
%{vty_group} %{frr_user}
507 # zebra_spec_add_service <service name> <port/proto> <comment>
508 # e.g. zebra_spec_add_service zebrasrv 2600/tcp "zebra service"
510 zebra_spec_add_service
()
512 # Add port /etc/services entry if it isn't already there
513 if [ -f
%{_sysconfdir}/services
] && \
514 ! %__sed -e 's
/#.*$//' %{_sysconfdir}/services 2>/dev/null | %__grep -wq $1 ; then
515 echo "$
1 $
2 # $3" >> %{_sysconfdir}/services
519 zebra_spec_add_service zebrasrv
2600/tcp "zebra service"
520 zebra_spec_add_service zebra
2601/tcp "zebra vty"
521 zebra_spec_add_service staticd
2616/tcp "staticd vty"
522 zebra_spec_add_service ripd
2602/tcp "RIPd vty"
523 zebra_spec_add_service ripngd
2603/tcp "RIPngd vty"
524 zebra_spec_add_service ospfd
2604/tcp "OSPFd vty"
525 zebra_spec_add_service bgpd
2605/tcp "BGPd vty"
526 zebra_spec_add_service ospf6d
2606/tcp "OSPF6d vty"
527 zebra_spec_add_service isisd
2608/tcp "ISISd vty"
529 zebra_spec_add_service ospfapi
2607/tcp "OSPF
-API"
532 zebra_spec_add_service babeld
2609/tcp "BABELd vty"
535 zebra_spec_add_service nhrpd
2610/tcp "NHRPd vty"
538 zebra_spec_add_service pimd
2611/tcp "PIMd vty"
541 zebra_spec_add_service pbrd
2615/tcp "PBRd vty"
544 zebra_spec_add_service ldpd
2612/tcp "LDPd vty"
547 zebra_spec_add_service eigrpd
2613/tcp "EIGRPd vty"
550 zebra_spec_add_service bfdd
2617/tcp "BFDd vty"
552 zebra_spec_add_service fabricd
2618/tcp "Fabricd vty"
554 zebra_spec_add_service vrrpd
2619/tcp "VRRPd vty"
557 zebra_spec_add_service pathd
2620/tcp "Pathd vty"
560 %if "
%{initsystem}"
== "systemd"
561 for daemon
in %all_daemons ; do
562 %systemd_post frr.service
565 /sbin
/chkconfig
--add frr
568 # Fix bad path in previous config files
569 # Config files won't get replaced by default, so we do this ugly hack to fix it
570 %__sed -i 's|watchfrr_options
=|
#watchfrr_options=|g' %{configdir}/daemons 2> /dev/null || true
572 # With systemd, watchfrr is mandatory. Fix config to make sure it's enabled if
573 # we install or upgrade to a frr built with systemd
574 %if "
%{initsystem}"
== "systemd"
575 %__sed -i 's|watchfrr_enable
=no|watchfrr_enable
=yes|g'
%{configdir}/daemons
2> /dev
/null || true
578 /sbin
/install-info
%{_infodir}/frr.info.gz %{_infodir}/dir
580 # Create dummy config file if they don't exist so basic functions can be used.
581 if [ ! -e
%{configdir}/frr.conf ] && [ ! -e %{configdir}/zebra.conf
]; then
582 # No frr.conf and per daemon configs exist
583 mv
%{configdir}/frr.conf.template %{configdir}/frr.conf
585 chown
%{frr_user}:%{frr_user} %{configdir}/frr.conf
587 chmod
640 %{configdir}/frr.conf
590 chown
%{frr_user}:%{frr_user} %{configdir}/daemons
594 # No config for watchfrr - this is part of /etc/sysconfig/frr
595 rm -f
%{configdir}/watchfrr.
*
598 if [ ! -e
%{configdir}/vtysh.conf
]; then
599 touch
%{configdir}/vtysh.conf
600 chmod
640 %{configdir}/vtysh.conf
603 chown
%{frr_user}:%{vty_group} %{configdir}/vtysh.conf
*
610 if [ "$
1"
-ge
1 ]; then
612 # Upgrade from older version
614 %if "
%{initsystem}"
== "systemd"
618 %systemd_postun_with_restart frr.service
623 service frr restart
>/dev
/null
2>&1
630 %if "
%{initsystem}"
== "systemd"
634 if [ $
1 -eq
0 ] ; then
635 %systemd_preun frr.service
641 if [ $
1 -eq
0 ] ; then
642 service frr stop
>/dev
/null
2>&1
643 /sbin
/chkconfig
--del frr
646 /sbin
/install-info
--delete
%{_infodir}/frr.info.gz %{_infodir}/dir
653 /usr
/share
/yang
/*.yang
655 %dir %attr(751,%{frr_user},%{frr_user}) %{configdir}
656 %dir %attr(755,%{frr_user},%{frr_user}) %{_localstatedir}/log
/frr
657 %dir %attr(751,%{frr_user},%{frr_user}) %{rundir}
659 %dir %attr(750,root
,root
) %{configdir}
660 %dir %attr(755,root
,root
) %{_localstatedir}/log
/frr
661 %dir %attr(750,root
,root
) %{rundir}
663 %{_infodir}/frr.info.gz
670 %exclude %{_sbindir}/ssd
707 %{_libdir}/frr
/modules
/pathd_pcep.so
709 %{_libdir}/libfrr.so
*
710 %{_libdir}/libfrrcares
*
711 %{_libdir}/libfrrospf
*
713 %{_libdir}/frr
/modules
/zebra_fpm.so
715 %{_libdir}/frr
/modules
/zebra_cumulus_mlag.so
716 %{_libdir}/frr
/modules
/dplane_fpm_nl.so
717 %{_libdir}/frr
/modules
/zebra_irdp.so
718 %{_libdir}/frr
/modules
/bgpd_bmp.so
720 %config(noreplace
) %{configdir}/[!v
]*.conf
*
721 %config(noreplace
) %attr(750,%{frr_user},%{frr_user}) %{configdir}/daemons
722 %if "
%{initsystem}"
== "systemd"
723 %{_unitdir}/frr.service
727 %config(noreplace
) %{_sysconfdir}/pam.d
/frr
728 %config(noreplace
) %{_sysconfdir}/logrotate.d
/frr
729 %{_sbindir}/frr
-reload
730 %{_sbindir}/frrcommon.sh
731 %{_sbindir}/frrinit.sh
732 %{_sbindir}/watchfrr.sh
739 %{_sbindir}/generate_support_bundle.py
740 %{_sbindir}/frr
-reload.py
741 %{_sbindir}/frr_babeltrace.py
742 %if %{with_ospfclient} && (0%{?rhel} > 7 || 0%{?fedora} > 29)
743 %{_sbindir}/ospfclient.py
745 %if 0%{?rhel} > 7 || 0%{?fedora} > 29
746 %{_sbindir}/__pycache__
/*
748 %{_sbindir}/generate_support_bundle.pyc
749 %{_sbindir}/generate_support_bundle.pyo
750 %{_sbindir}/frr
-reload.pyc
751 %{_sbindir}/frr
-reload.pyo
752 %{_sbindir}/frr_babeltrace.pyc
753 %{_sbindir}/frr_babeltrace.pyo
758 # add rpki module to daemons
759 sed
-i
-e 's
/^\
(bgpd_options
=\
)\
(.
*\
)\
(".
*\
)/\
1\
2 -M rpki\
3/'
%{_sysconfdir}/frr
/daemons
762 # remove rpki module from daemons
763 sed
-i 's
/ -M rpki
//'
%{_sysconfdir}/frr
/daemons
766 %{_libdir}/frr
/modules
/bgpd_rpki.so
770 %{_libdir}/libfrrsnmp.so
*
771 %{_libdir}/frr
/modules
/*snmp.so
776 %dir %{_includedir}/%{name}
777 %{_includedir}/%{name}/*.h
778 %dir %{_includedir}/%{name}/ospfd
779 %{_includedir}/%{name}/ospfd
/*.h
781 %dir %{_includedir}/%{name}/bfdd
782 %{_includedir}/%{name}/bfdd
/bfddp_packet.h
785 %dir %{_includedir}/%{name}/ospfapi
786 %{_includedir}/%{name}/ospfapi
/*.h
789 %dir %{_includedir}/%{name}/eigrpd
790 %{_includedir}/%{name}/eigrpd
/*.h
796 * Wed Jul
20 2022 Martin Winter
<mwinter@opensourcerouting.org
> - %{version}
798 * Wed Jul
13 2022 Jafar Al
-Gharaibeh
<jafar@atcorp.com
> - 8.3
800 - Add camelcase json keys
in addition to pascalcase
(Wrong JSON keys will be depracated
)
801 - Fix corruption when route
-map delete
/add sequence happens
(fast re
-add
)
803 - RFC5424
& journald extended syslog target
805 - Fix broken FSM
in active
/passive modes
807 - Notification Message Support
for BGP Graceful Restart
(rfc8538
)
808 - BGP Cease Notification Subcode For BFD
809 - Send Hold Timer
for BGP
(own implementation without an additional knob
)
810 - New `
set as
-path replace`
command for BGP route
-map
811 - New `match peer`
command for BGP route
-map
812 - New `ead
-es
-frag evi
-limit`
command for EVPN
813 - New `match evpn route
-type`
command for EVPN route
-map to match Type
-1/Type
-4
814 - JSON outputs
for all RPKI show commands
815 - Set attributes via route
-map
for BGP conditional advertisements
816 - Pass non
-transitive extended communities between RS and RS
-clients
817 - Send MED attribute when aggregate prefix is created
818 - Fix aspath memory leak
in aggr_suppress_map_test
819 - Fix crash
for `show ip bgp vrf all all neighbors
192.168.0.1 ...`
820 - Fix crash
for `show ip bgp vrf all all`
821 - Fix memory leak
for BGP Community Alias
in CLI
822 - Fix memory leak when setting BGP community at egress
823 - Fix memory leak when setting BGP large
-community at egress
824 - Fix SR color nexthop processing
in BGP
825 - Fix setting
local-preference
in route
-map using
+/-
826 - Fix crash using Lua and route
-map to
set attributes via scripts
827 - Fix crash when issuing various forms of `bgp no
-rib`
829 - JSON output
for show summary
command
830 - Fix crash when MTU mismatch occurs
831 - Fix crash with xfrm interface
type
832 - Fix infinite loop when parsing LSPs
833 - Fix router capability TLV parsing issues
835 - New `show thread timers`
command
837 - Add LSA statistics to LSA database
838 - Add LSA stats to `show area json` output
839 - Show
time left
in hello timer
for `show ipv6 ospf6 int`
840 - Restart SPF when distance is updated
841 - Support keychain
for ospf6 authentication
843 - New `show ip ospf reachable
-routers`
command
844 - Restart SPF when distance is updated
845 - Use consistent JSON keys
for `show ip ospf neighbor` and detail version
847 - Add additional IGMP stats
848 - Add IGMP join sent
/failed statistics
849 - Add IGMP total groups and total
source groups to statistics
850 - New `debug igmp trace detail`
command
851 - New `ip pim passive`
command
852 - JSON support added
for command `show ip igmp sources`
853 - Allow the LPM match work properly with prefix lists and normal RPs
854 - Do not allow
224.0.0.0/24 range
in IGMP join
855 - Fix IGMP packet
/query check
856 - Handle PIM join
/prune receive flow
for IPv6
857 - Handle receive of
(*,G
) register stop with
source address as
0
858 - Handle of exclude mode IGMPv3 report messages
for SSM
-aware group
859 - Handle of IGMPv2 report message
for SSM
-aware group range
860 - Send immediate join with possible sg rpt prune bit
set
861 - Show group
-type under `show ip pim rp
-info`
862 - Show total received messages IGMP stats
864 - Capture zebra advertised ECMP limit
865 - Do not register existing nexthop to Zebra
866 - Reject route config with too many nexthops
867 - Track nexthops per
-safi
869 - Add some more information to `show watchfrr`
870 - Send operational state to systemd
872 - Add ability to know when FRR is not ASIC offloaded
873 - Add
command for setting protodown bit
874 - Add dplane
type for netconf data
875 - Add ECMP supported to `show zebra`
876 - Add EVPN status to `show zebra`
877 - Add
if v4
/v6 forwarding is turned on
/off to `show zebra`
878 - Add initial zebra tracepoint support
879 - Add kernel nexthop group support to `show zebra`
880 - Add knowledge about ra and rfc
5549 to `show zebra`
881 - Add mpls status to `show zebra`
882 - Add netlink debug dump
for netconf messages
883 - Add netlink debugs
for ip rules
884 - Add OS and version to `show zebra`
885 - Add support
for end.dt4
886 - Add to `show zebra` the
type of vrf devices being used
887 - Allow
*BSD to specify a receive buffer size
888 - Allow multiple connected routes to be choosen
for kernel routes
889 - Allow system routes to recurse through themselves
890 - Do not send RAs w
/o link
-local v6 or on bridge
-ports
891 - Evpn disable remove l2vni from l3vni list
892 - Evpn
-mh bonds protodown check
for set
893 - Evpn
-mh use protodown update reason api
894 - Fix cleanup of meta queues on vrf disable
895 - Fix crash
in evpn neigh cleanup all
896 - Fix missing delete vtep during vni transition
897 - Fix missing vrf change of l2vni on vxlan interface
898 - Fix rtadv startup when config
read in is before interface up
899 - Fix use after deletion event
in FreeBSD
900 - Fix v6 route replace failure turned into success
901 - Get zebra graceful restart working when restarting on
*BSD
902 - Handle FreeBSD routing socket enobufs
903 - Handle protodown netlink
for vxlan device
904 - Include mpls enabled status
in interface output
905 - Include old reason
in evpn
-mh bond update
906 - Keep the interface flags safe on multiple ioctl calls
907 - Let
/32 host route with same ip cross vrf
908 - Make router advertisement warnings show up once every
6 hours
909 - Prevent crash
if zebra_route_all is used
for a route
type
910 - Prevent installation of connected multiple
times
911 - Protodown
-up event trigger interface up
912 - Register nht nexthops with proper safi
913 - Update advertise
-svi
-ip macips w
/ new mac
914 - When handling unprocessed messages from kernel print usable string
915 - New `show ip nht mrib`
command
916 - Handle ENOBUFS errors
for FreeBSD
918 * Tue Mar
1 2022 Jafar Al
-Gharaibeh
<jafar@atcorp.com
> - 8.2
919 - The FRRouting community would like to announce FRR
Release 8.2.
920 - This release consists of just over
800 commits from
62 authors.
921 - Selected features and bug fixes are listed below.
923 - Fix the checks
for truncated packets
925 - Correct one spelling error of comment
926 - Fix detection timeout update
927 - Fix possibly wrong counter of control packets
929 - Add "json" option to a few more show commands
930 - Add 'show bgp
<afi
> <safi
> json detail' header data
931 - Add a
6 hour warning to missing policy
932 - Add an ability to match ipv6 next
-hop by prefix
-list
933 - Add autocomplete
for access
-list under bmp node
934 - Add autocomplete
for as
-path filters
935 - Add autocomplete
for set/match community
/large
/ext lists
936 - Add long
-lived graceful restart capability
937 - Add peer
-groups to neighbor autocomplete
938 - Adjust symbolic names
for cease notifications according to rfc4486
939 - Deprecate dpa
, advertiser and rcid_path path attributes
940 - Extended bgp administrative shutdown communication
941 - Fix crash when using "show bgp vrf all"
942 - Fix inconsistency of match ip
/ipv6 next
-hop commands
943 - Fix missing name of default vrf
944 - Handle TCP connection errors with connection callbacks
for RPKI
945 - Implement llgr helper mode
947 - Support redirect import more than one route
-target ipv6
949 - Update alpine build
enable set own version
951 - Add link state traffic engineering support
952 - Fix router capability tlv parsing issues
953 - Fix running
-config
for fast
-reroute
954 - Make isis work with default vrf name different than 'default'
956 - Add missing vrf parameter to "clear ipv6 ospf6 interface"
957 - Add prompt
for commands with non
-exist vrf
958 - Add support
for nssa
type-7 address ranges
959 - Add the ability of specifying router
-id
/area
-id
in no debug ospf6
960 - Do not originate
type-4 lsa when nssa
961 - Do not send
type-5 into stub area
962 - Fix ecmp inter
-area route nexthop update
963 - Fix memory leak
for `show ipv6 ospf6 zebra json`
965 - Fix wrong comparison of routemap name
966 - Fix crash on "ospf send
-extra
-data zebra"
967 - Fix incorrect detection of topology changes
in helper mode
968 - Fix loss of mixed form
in "range"
command
969 - Fix no
-form of "graceful
-restart"
command
970 - Fix summary
-address deletion
971 - Fix wrong parsing of te subtlv
973 - Add vlan actions to vty
974 - Pbr route maps get addr family of nhgs
975 - Protect from a possible null dereference
977 - Do not allow
224.0.0.0/24 range
in igmp join
978 - Fix igmp user config
979 - Fix msdp mesh grp with wildcard member addr
980 - Fix stale forwarding entries left around after join goes away
981 - Fix FRR drops IGMP packets
for TOS value other than
0XC0
983 - Check
if frr.conf already exists
984 - Logrotate file has typo
for staticd
986 - Fix packet send
for non primary addresses
988 - Add missing rpki node when showing config
989 - Improve startup
time by ca. Ă—
6
990 - remove `address
-family evpn`
992 - Allow an integrated config to work within a namespace
994 - Add optional nhg id output to `show ip ro`
995 - Add resolver flag
for nexthop
in json
996 - Add support
for json output
in srv6 locator detail
command
997 - Don't lose next hop weights
while exporting via fpm
998 - Fix buffer overflow
1000 - Fix route
-map application when when using vrfs
1002 * Tue Nov
2 2021 Jafar Al
-Gharaibeh
<jafar@atcorp.com
> - 8.1
1003 - FRR
8.1 brings a long list of enhancements and fixes with
1200 commits from
1004 - 75 developers. Thanks to all contributers.
1006 - Lua hooks are now feature complete
, with one hook available
for use
(http
://docs.frrouting.org
/en
/latest
/scripting.html
)
1007 - Improvements to SRv6
(Segment Routing over IPv6
) (http
://docs.frrouting.org
/en
/latest
/zebra.html
#segment-routing-ipv6)
1008 - Improvements to
Prefix-SID
(Type
5)
1009 - EVPN route
type-5 gateway IP overlay Index
(http
://docs.frrouting.org
/en
/latest
/bgp.html
#evpn-overlay-index-gateway-ip)
1010 - OSPFv3 NSSA and NSSA totally stub areas
(http
://docs.frrouting.org
/en
/latest
/ospf6d.html
#ospf6-area)
1011 - OSPFv3 ASBR summarization
(http
://docs.frrouting.org
/en
/latest
/ospf6d.html
#asbr-summarisation-support-in-ospfv3)
1012 - OSPFv3 Graceful Restart
(http
://docs.frrouting.org
/en
/latest
/ospf6d.html
#graceful-restart)
1013 - OSPFv2 Graceful Restart
(restarting mode added
, helper was already implemented
) (http
://docs.frrouting.org
/en
/latest
/ospfd.html
#graceful-restart)
1015 - Every node
in running config now has an explicit "
exit" tag
1016 - Link bandwidth
in BGP is now correctly encoded according to IEEE
754. To stay with old incorrect encoding use
:
1017 - `neighbor PEER disable
-link
-bw
-encoding
-ieee`
1020 Fix path
for daemons file
install
1022 - Add "json" option to "show bgp as
-path
-access
-list"
1023 - Add `disable
-addpath
-rx` knob
1024 - Add an ability to
set extcommunity to none
in route
-maps
1025 - Add counter of displayed show bgp summary when filtering
1026 - Add knob to config cond
-adv scanner period
1027 - Add route
-map `match
alias`
command
1028 - Add rpki
source address configuration
1029 - Add show bgp summary filter by neighbor or as
1030 - Add terse display option on show bgp summary
1031 - Allow
for auto
-completion of community
alias's created
1032 - Bgp knob to teardown session immediately when peer is unreachable
1033 - Expand 'bgp default
<afi
>-<safi
>' cmds
1034 - Extend evpn next hop tracking to
type-1 and
type-4 routes
1035 - Fix "no router bgp x vrf default"
1036 - Flowspec redirect vrf uses vrf table instead of allocated table id
1037 - Handle quick flaps of an evpn prefix properly
1038 - Initial batch of evpn lttng tracepoints
1039 - Limit processing to what is needed
in rpki validation
1040 - Modify vrf
/view display
in show bgp summary
1041 - Set
4096 instead of
65535 as new max packet size
for a new peer
1042 - Set extended msg size only
if we advertised and received capability
1043 - Show bgp community
alias in json community list output
1044 - Show bgp prefixes by community
alias
1045 - Show max packet size per update
-group
1046 - Split soft reconfigure table task into several
jobs to not block vtysh
1047 - Store distance received from a redistribute statement
1048 - Update route
-type-1 legend to match output
1050 - Fix sending of lsp with null seqno
1052 - Add "json" option to "show ip
[v6
] access
-list"
1053 - Add "json" option to "show ip
[v6
] prefix
-list"
1054 - Add "json" option to "show route
-map"
1055 - Prevent grpc assert on missing yang node
1057 - Clear cache when shortcuts are cleared
1058 - Fix corrupt address being shown
for shortcuts with no cache entry
1059 - Set prefix correctly
in resolution request
1061 - Add debug commands
for lsa all and route all
1062 - Add warning log
for late hello packets
1063 - Add write
-multiplier configuration
1064 - Don't update router
-id
if at least one adjacency is full
1065 - Extend the "redistribute"
command with more options
1066 - Fix issue when displaying the redistribute
command
1067 - Fix logging of border router routes
1068 - Json output
for database dump show
command
1069 - Link state id
in lsa database json output
1070 - Send lsa update immediately when ospf instance is deleted
1072 - Fix crash when creating vlink
in unknown vrf
1073 - Gr conformance fix
for hello packet dr election
1074 - Print extra lsa information
in some log messages
1075 - Rfc conformance
test case 25.23 issue fix
1076 - Show ip ospf route json does not shown metric and tag
1077 - Summary lsa is not originated when process is reset
1079 - Handle pcinitiated configuration
, main thread
1080 - Handle pcinitiated messages
, thread controller
1081 - Handle srp_id correctly
1082 - If pce ret no
-path to pcreq don't retry pcreq nor delegate
1084 - Add `match ip
-protocol
[tcp|udp
]`
1085 - Add ability to
set/unset src and dest ports
1086 - Nhg "add" edge
case for last
in table range
1087 - Start inclusion of src and dst ports
for pbrd
1089 - Add tos
/ttl check
for igmp conformance
1090 - Allow join prune intervals to be as small as
5 seconds
1091 - Allow msdp group name 'default'
1092 - Fix register suppress timer code
1093 - Fix uaf
/heap corruption
in bsm code
1094 - Fix
command "no ip msdp mesh
-group member"
1095 - Igmp groups are not getting timeout
1096 - Igmp memberships are not querier specific
1097 - Igmp sockets need to be iface
-bound too
1098 - Prevent uninited usage of nexthop
1099 - Support msdp global timers configuration
1101 - Add cli timestamp '
-t' flag
1102 - Add error code
if daemon is not running
1103 - Fix searching commands
in parent nodes
1105 - Add msdp timer configuration
1106 - Fix bgp multicast prefix
type
1107 - Mark a couple of prefix
-list
/access
-list leafs as mandatory
1108 - Move multicast prefix
type definition
1109 - Replace an empty pattern with a zero
-length restriction
1110 - Rework pim msdp mesh group
1111 - Simplify msdp peer handling
1113 - Add "json" option to "show interface"
1114 - Various improvment to dataplane interface
1115 - Add message counts
for `show zebra client`
1116 - Add nhg id to show ip route json
1117 - Add show
command for ra interface lists
1118 - Fix ipv4 routes with ipv6 link
local next hops
install in fpm
1119 - Handle bridge mac address update
in evpn contexts
1120 - Move individual lines to table
in `show zebra client`
command
1121 - Refresh vxlan evpn contexts
, when bridge interface goes up
1122 - Update zl3vni when bridge link refreshed
in other namespaces
1124 * Wed Jul
21 2021 Martin Winter
<mwinter@opensourcerouting.org
> - 8.0
1126 - New daemon pathd
for segment routing
1127 - EVPN Multihoming is now fully supported
1128 - OSPFv3 now supports VRFs
1129 - TI
-LFA has been implemented
in IS
-IS and OSPF
1130 - Ability
for Zebra to dump netlink messages
in a human
-friendly format
1131 - LDP gained SNMP support
1132 - libyang minimun version is now
2.0
1134 - Add `distribute
-list` commands
1135 - Fix memory leak
in connected route handling
1137 - Add support
for use of aliases with communities
1138 - Add support of tcp
-mss
for neighbors
1139 - Add support
for EVPN Multihoming
1140 - Add ability to show BGP routes from a particular table version
1141 - Add support
for for RFC
8050 (MRT add
-path
)
1142 - Add SNMP support
for MPLS VPN
1143 - Add `show bgp summary wide`
command to show more detailed output
1145 - Add ability
for peer
-groups to have `ttl
-security hops` configured
1146 - Add support
for conditional Advertisement
1147 - Add support
for RFC
4271 Delay Open Timer
1148 - Add a knob to not advertise
until route is installed
in fib
1149 - Add BGP
-wide configuration
for graceful shutdown
1150 - Add support
for RFC
8654 extended messages
1151 - Improve RPKI reporting as well as new show commands
1152 - Improve handling of VRF route leaking
1153 - Improve scaling behavior
for dynamic neighbors
1154 - Improve LL nexthop tracking to be interface based
1155 - Improve route reachability handling with respect to blackhole routes
1156 - Improve SNMP traps to RFC
4273 notifications
1157 - Improve EVPN routes to use L3 NHG's where applicable
1158 - Improvements to EVPN
1159 - Improvements to update behavior
1160 - Fix various issues with connection resolution
1161 - Fix statistics commands
in some situations
1162 - Fix non
-determistic locally
-originated paths
in bestpath selection
1163 - Continue working on transitioning to YANG
/Northbound configuration
1164 - Various bug fixes and performance improvements
1166 - Add `distribute
-list` commands
1167 - Ensure received AS number is the same as ours
in all situations
1168 - Properly validate TLV lengths
in some situations
1170 - Add ldb
-sync functionality
1171 - Add TI
-LFA functionality
1172 - Add support
for Anycast
-SID's
1173 - Add support
for classic LFA RFC
5286
1174 - Add `show isis fast
-reroute summary`
command
1175 - Add support
for Remote LFA RFC
7490
1176 - Fix Attach
-bit processing
in some scenarios
1177 - Cleanup BFD integration
1178 - Various bug fixes and performance improvements
1181 - Support
for LDP IGP Synchronization
1182 - Support
for RLFA clients
1183 - Various bug fixes and performance improvements
1185 - Various bugfixes and performance improvements
1187 - Add `nhrp multicast
-nflog
-group
(1-65535)`
command
1188 - Add configuration options
for vici socket path
1189 - Add support
for forwarding multicast packets
1190 - Fix handling of MTU
1191 - Fix handling of NAT extension
1192 - Retry IPsec under some conditions
1194 - Add OSPF GR helper support
1195 - Add JSON support
for various commands
1196 - Add `summary
-address A.B.C.D
/M ...` commands
1197 - Add `area X nssa suppress
-fa`
command
1198 - Add support
for TI
-LFA
1199 - Add support
for BFD profiles
1200 - Add support
for Traffic Engineering database
1201 - Add support
for usage of DMPVPN with OSPF
1202 - Add `clear ip ospf neighbor` commands
1203 - Add YANG support
for route
-maps
1204 - Improvements to SNMP
1205 - Fixes
for type 5 and
type 7 LSA handling
1206 - Various bug fixes and performance improvements
1208 - Add support
for VRFs
1209 - Add JSON support to a bunch of commands
1210 - Add ability to control maximum paths
for routes
1211 - Add `show ipv6 ospf6 vrfs`
command
1212 - Add support
for BFD profiles
1213 - Fix to not send hellos on loopbacks
1214 - Cleanup area handling around interfaces
1215 - YANG support
for route
-maps
1216 - Various bug fixes and performance improvements
1218 - Cleanup trust of user input
1220 - Add support of SR
-TE policy management daemon
1221 - Add optional support
for PCEP to pathd
1222 - Integrate PCEP
-LIB into FRR
1224 - Add `
set installable` nhg
command
1225 - Improve interface up
/down event handling
1227 - Add YANG integration
1228 - Add JSON support to various commands
1229 - Add BFD profile support
1230 - Fixes to IGMP conformance
1231 - Fixes to behavior surrounding Prune and Prune
-pending
1232 - Various bug fixes and performance improvements
1234 - Fix interface wakeup after shutdown
1236 - Add ability to use Nexthop Groups
1237 - Add v4 redistribute watching
1241 - Fix nexthop handling
in some situations
1242 - Forbid blackhole and non
-blackhole nexthops
in a single route
1244 - printf formatting cleanups
1246 - Add a `show
history`
command
1247 - Add `show memory
<daemon
>` support
1248 - Start deprecation cycle
for `address
-family evpn`
1249 - Display version with
--help
1254 - Add JSON support to various commands
1255 - Add Human readable netlink dumps
1256 - Add L2 NHG support
1257 - Add support
for LSPs to FPM dataplane
1258 - Add ability
for other protocol daemons to
install nexthop groups into the kernel
1259 - Add YANG support
for route
-maps
1260 - Improve scale performance when handling a large number of VRF's
1261 - Improve network namespace handling
1262 - Improve asic
-offload handling
1263 - Improve FreeBSD interface and route handling
1264 - Improve handling of neighbors
in kernel dataplane plugin
1265 - Improve label manager
1266 - Improve route
-map processing
1267 - Improve debug
-ability of routes and VRFs
1268 - Improve FPM dataplane plugin
1269 - Improve handling of reachability
/ nexthop tracking on shutdown interfaces
1270 - Improve EVPN support
1271 - Fix startup handling of `
set src X`
1272 - Various bug fixes and performance improvements
1274 * Wed Mar
3 2021 Martin Winter
<mwinter@opensourcerouting.org
> - 7.5.1
1276 - Fix connected route leak on change
1278 - Session lookup was sometimes wrong
1279 - Memory leak and handling cleanups
1280 - In some situations handle vrf appropriately when receiving packets
1282 - Peer
Group Inheritance Fixes
1283 - Dissallow attempt to peer peers reachable via blackholes
1284 - Send BMP down message when reachability fails
1285 - Cleanup handling of aggregator data when the AGG AS is
0
1286 - Handle `neighbor
<peer
-group allowas
-in` config changes properly
1287 - Properly parse community and lcommunity values
in some circumstances
1288 - Allow peer
-groups to configure `ttl
-security hops`
1289 - Prevent v6 routes with v4 nexthops from being installed
1290 - Allow `default
-originate` to be cleared from a peer group
1291 - Fix evpn route
-map vni filter at origin
1292 - local routes were using non
-default distance
1293 - Properly track
if the nexthop was updated
in some circumstances
1294 - Cleanup `show running` when running bgp with `
-e X` values
1295 - Various Memory leaks
in show commands
1296 - Properly withdraw exported routes when deleting a VRF
1297 - Avoid resetting ebgp
-multihop
if peer setting is the same as peer
-group
1298 - Properly encode flowspec rules to zebra
in some rare circumstances
1299 - Generate statistics
for routes
in bgp when we have exactly
1 route
1300 - Properly apply route
-map
for the default
-originate
command
1302 - Properly
set MTU
for eigrp packets sent
1303 - Various memory leaks and using uninited data fixes
1305 - When last area address is removed
, resign
if we were the DR
1306 - Various memory leaks and using uninited data fixes
1308 - Various memory leaks and using uninited data fixes
1310 - Use onlink routes when prefix
== nh
1311 - Shortcut routes are installed with proper nexthop
1313 - Prevent duplicate packet
read in multiple vrf situation
1314 - Fix area removal at interface level
1315 - Restore Point to MultiPoint interface types
1316 - Correctly handle MTU change on startup
1317 - Multi Instance initialization sometimes was not successful
1318 - NSSA translate
-always was not working properly
1320 - Don't send hellos on loopback interfaces
1321 - Handle ECMP better when a sub
-path is removed
1322 - Memory leak and handling fixes
1323 - Fix Link LSA not updating when router priority is modified
1324 - Some output from show commands was wrong
1325 - Intra area remote connected prefixes sometimes not installed
1327 - Various memory leaks and using uninited data fixes
1329 - SGRpt prune received during prune didn't override holdtime
1330 - Various memory leaks and using uninited data fixes
1332 - Fix VRF and usage on startup
in some instances
1333 - Tableid was being mishandled
in some cases
1335 - Disable bracketed paste
in readline.
1337 - Various memory leaks and using uninited data fixes
1339 - Always
install blackhole routes using kernel routes instead of nexthops
1340 - Various memory leaks and using uninited data fixes
1341 - Dissallow resolution to duplicate nexthops that created infinite nexthops
1342 - Apply the route
-map delay
-timer globally
1343 - Some routes were stuck
in Queued state when using the FPM
1344 - Better handle vrf creation when using namespaces
1345 - Set NUD_NOARP on sticky mac entries
in addtion to NTF_STICKY
1346 - Allow `
set src X` to work on startup
1348 - Fix a variety of memory leaks
1349 - Fix VRF Creation
in some instances
1350 - RPKI context editing was not properly handled
in reload situations
1351 - routemap code was not properly handling modification of CLI
in some instances
1353 - Update to using rtrlib
0.7.0
1354 - Fix passthrough path
for Libyang
1.x
1356 - Remove old docker deps
1358 * Mon Nov
2 2020 Donald Sharp
<sharpd@nvidia.com
> - 7.5
1361 - Minimum ttl support
1365 - Add wide option to display of routes
1366 - Add `maximum
-prefix
<num
> force`
1367 - Add `bestpath
-routes` to neighbor
command
1368 - Add `bgp shutdown message MSG...`
command
1369 - Add v6 Flowspec support
1370 - Add `neighbor
<neigh
> shutdown rtt`
command
1371 - Allow update
-delay to be applied globaly
1373 - Beginning of MultiHoming Support
1375 - Segment Routing Support
1377 - Guard against adj timer display overflow
1378 - Add support
for Anycast
-SIDs
1379 - Add support
for Topology Independent LFA
(TI
-LFA
)
1380 - Add `lsp
-gen
-interval
2` to isis configuration
1382 - Segment Routing support
for ECMP
1384 - Prevent crash
if transferring config amongst instances
1386 - Adding json support to commands
1387 - DSCP
/ECN based PBR Matching
1389 - Add more json support to commands
1390 - Fix missing mesh
-group commands
1391 - MSDP SA forwarding
1392 - Clear
(s
,g
,rpt
) ifchannel on
(*, G
) prune received
1393 - Fix igmp querier election and IP address mapping
1394 - Crash fix when RP is removed
1396 - Northbound Support
1398 - Filter and route
-map Support
1399 - OSPF model definition
1400 - BGP model definition
1402 - Speed up output across daemons
1403 - Fix build
-time errors
for some
--enable flags
1404 - Speed up output of configuration across daemons
1406 - nexthop group support
for FPM
1407 - northbound support
for rib model
1408 - Backup nexthop support
1409 - netlink batching support
1410 - Allow upper level protocols to request ARP
1411 - Add json output
for zebra ES
, ES
-EVI and access vlan dumps
1413 - Upgrade to using libyang1.0
.184
1416 - Moved RPKI to subpackage
1417 - Added SNMP subpackage
1419 - As always there are too many bugfixes to list individually. This release
1420 - compromises just over
1k of commits by the community
, with contributors from
1423 * Tue Jun
30 2020 Martin Winter
<mwinter@opensourcerouting.org
> - 7.4
1425 - Use sequence numbers
for community lists
1426 - Fixes to nexthop groups
1427 - Add feature to limit outgoing number of routes
1428 - Per Neighbor Graceful Restart
1429 - Multiple Graceful Restart fixes
1430 - Support sub
-Type
-4 and sub
-Type
-5 for the VPNv4 SRv6 backend
1431 - rfc7606 support
: treat certain malformed routes as withdraw
1432 - allow origin override
for route aggregates
1433 - rfc6608 support
: Subcodes
for BGP Finite State Machine Error
1434 - rfc7607 support
: Codification of AS
0 Processing
1435 - rfc6286 support
: Autonomous
-System
-Wide Unique BGP Identifier
for BGP
-4
1436 - Unequal cost multipath
(a.ka. weighted ECMP
) with BGP link
-bandwidth
1437 - Enable rfc8212 by default except datacenter profile
1441 - Add copy
command to copy config from file into running config
1443 - adding support
for LDP ordered label distribution control
1445 - IS
-IS Segment Routing support
1447 - add initial support to add
/remove lsps
1449 - fix broadcast address
in IPv4 networks with
/31 mask
1450 - Add Graceful Restart support
for Protocol Daemon restarts
1452 - migrate route
-maps to use northbound interface
1453 - plus countless bug fixes and other improvements
1455 * Mon Jun
15 2020 Sascha Kattelmann
<sascha@netdef.org
>
1458 * Wed May
06 2020 David Lamparter
<equinox@opensourcerouting.org
> - 7.3.1
1461 * Fri Feb
14 2020 Martin Winter
<mwinter@opensourcerouting.org
> - 7.3
1464 - Route Aggregation code speed ups
1465 - BGP Vector I
/O speed ups
1466 - New CLI
: `
set distance XXX`
1467 - New CLI
: `aggregate
-address A.B.C.D
/M route
-map WORD`
1468 - New CLI
: `bgp reject
-as
-sets`
1469 - New CLI
: `advertise pip ...`
1470 - New CLI
: `match evpn rd ASN
:NN_OR_IP
-ADDRESS
:NN`
1471 - New CLI
: `show bgp l2vpn evpn community|large
-community X`
1472 - New CLI
: `show bgp l2vpn evpn A.B.C.D`
1473 - Auto
-completion
for clear bgp
command
1474 - Add ability to
set tcp socket buffer size
1476 - Partial MPLS TE support
1478 - New CLI
: `
set vrf unchanged|NAME`
1481 - New CLI
: 'show bfd peers brief'
1482 - New CLI
: 'clear bfd peer ...'
1484 - Significant Speedups
in accessing Internal Data
for higher scale
1485 - Support
for joining any
-source Multicast
1486 - Updated CLI
: 'show ip pim upstream
-join
-desired'
1487 - New CLI
: 'show ip pim channel'
1489 - MLAG experimental support
1492 - Northbound Conversion
- NHRPd
1495 - New CLI
: `banner motd line LINE...`
1497 - New CLI
: `show yang operational
-data XPATH`
1498 - New CLI
: `debug northbound`
1500 - Nexthop
Group support
1501 - New CLI
: 'debug zebra nexthop
[detail
]'
1502 - New CLI
: 'show router
-id'
1503 - MLAG experimental support
1505 - Additional status messages of system state to systemd
1506 - New CLI
: `watchfrr ignore DAEMON`
1508 - As always all daemons have received too many bug fixes to fully list
1509 - There has been a significant focus on increasing
test coverage
1510 - Change
in Behavior
:
1512 - All areas created default automatically to level
-1-2
1514 - Nexthop
Group Installation
in Kernel is turned on by default
1515 if the kernel supports
- New CLI
: 'show nexthop
-group rib
[singleton
]'
1517 - Renamed to frr
-* to remove collision with other packages
1519 * Fri Jan
17 2020 Martin Winter
<mwinter@opensourcerouting.org
> - 7.2.1
1522 - Do not apply eBGP policy
for iBGP peers
1523 - Show `ip` and `fqdn`
in json output
for `show
[ip
] bgp
<route
> json`
1524 - Fix large route
-distinguisher's format
1525 - Fix `no bgp listen range ...` configuration
command
1526 - Autocomplete neighbor
for clear bgp
1527 - Reflect the distance
in RIB when it is changed
for an arbitrary afi
/safi
1528 - Notify "Peer De
-configured" after entering 'no neighbor
<neighbor
> cmd
1529 - Fix per afi
/safi addpath peer counting
1530 - Rework BGP dampening to be per AFI
/SAFI
1531 - Do not send next
-hop as
:: in MP_REACH_NLRI
if no link
-local exists
1532 - Override peer's TTL only
if peer
-group is configured with TTL
1533 - Remove error message
for unkown afi
/safi combination
1534 - Keep the session down
if maximum
-prefix is reached
1536 - Fix BFD down not tearing down OSPF adjacency
for point
-to
-point net
1538 - Fix multiple VRF handling
1539 - VRF security improvement
1543 - Make sure `no ip nhrp map
<something
>` works as expected
1545 - Add missing sanity check
in the parsing of label messages
1547 - Use correct state when installing evpn macs
1548 - Capture dplane plugin flags
1550 - Fix interface config when vrf changes
1551 - Fix Interface Infinite Loop Walk
(for special interfaces such as bond
)
1553 - fix missing vrrpd daemon
1555 - Rename man pages
(to avoid conflicts with other packages
)
1556 - Various other fixes
for code cleanup and memory leaks
1558 * Fri Dec
27 2019 Donatas Abraitis
<donatas.abraitis@gmail.com
>
1559 - Add CentOS
8 support
1561 * Tue Oct
15 2019 Martin Winter
<mwinter@opensourcerouting.org
> - 7.2
1563 - -N
<namespace
> to allow
for config file locating when running FRR inside
1565 - Impoved Testing across all daemons
1568 - Conversion to Northbound interface
1570 - Aggregate
-address add route
-map support
1572 - Improved JSON output
for many commands
1573 - `show bgp afi safi summary failed`
command
1574 - `clear bop
*` clears all peers
1575 - Show FQDN
for `show bgp ipv4 uni` commands
1576 - Display BestPath selection reason as part of show commands
1578 - Infrastructure changes to allow VRF's
1579 - SIGHUP signals the config reload
1580 - Conversion to Northbound interface
1583 - Support
for circuits with MTU
> 8192
1585 - fwmark support as part of match criteria
1586 - autocompletion of PBRMAPS
1587 - Improved Nexthop Support
1589 - PIM
-BSM receive support
1590 - Improved debugging support
1591 - Store ECMP paths that are not currently legal
for use
1592 - Disallow igmp query from a non
-connected
source
1593 - Many new cli improvements and changes
1595 - Add Support
for RFC
3768 and RFC
5798
1597 - Add sequence numbers to access
-lists
1598 - Add `match ip next
-hop
type blackhole`
1599 - Improved ability to notice dependency changes
1601 - `sharp watch
[import|nexthop
]` you can now specify a prefix instead
1604 - Significantly Improved NHT
1606 - Many dataplane improvements
for routes
, neighbor table and EVPN
1607 - NHT cli can now be specified per VRF and improved ability to control
1608 NHT data being shown
1609 - Removed duplicate processing of routes
1610 - Improved debugablility
1611 - RMAC and VxLan support
for the FPM
1614 - Nexthop
Group Improvements
1615 - `log
-filter WORD` added
1618 - libcap should be used as part of build or significant slowdowns
1620 - Lua builds have been fixed
1621 - Improved Cross building
1623 * Mon Jun
17 2019 David Lamparter
<equinox@opensourcerouting.org
> - 7.1
1624 - gRPC northbound plugin
1625 - "table NNN" removed from zebra
1626 - more dataplane MT work
1627 - EVPN
in non
-default VRFs
1628 - RFC
8212 (default deny policy
for eBGP
)
1629 - RFC
8106 (IPv6 RA DNS options
)
1631 * Wed May
8 2019 Martin Winter
<mwinter@opensourcerouting.org
> - 7.0.1
1633 - Don't send Updates with BGP Max
-Prefix Overflow
1634 - Make sure `next
-hop
-self all` backward compatible with force
1635 - Fix as
-path validation
in "show bgp regexp"
1636 - Fix interface
-based peers to override peergroups
1637 - Fix removing private AS numbers
if local-as is used
1638 - Fix show bgp labeled_unicast
1639 - Add
command to lookup prefixes
in rpki table
1640 - Fix peer count
in "show bgp ipv6 summary"
1641 - Add missing ipv6 only peer flag action
1642 - Fix address family output
in "show bgp
[ipv4|ipv6
] neighbors"
1643 - Add missing checks
for vpnv6 nexthops
1644 - Fix nexthop
for ipv6 vpn
case
1645 - rip
: Fix removal of passive interfaces
1647 - Fix json timer output
1648 - Fix milliseconds
in json output
1650 - Fix
source port according RFC
5881, Sec
4
1651 - Fix IPv6 link
-local peer removal
1652 - Fix interface clean up when deleting interface
1653 - pim
: Fix interface clean up when deleting interface
1654 - nhrp
: Fix interface clean up when deleting interface
1656 - Workaround to get FRR building with libyang
0.x and
1.x
1657 - Fix
in priv handling
1658 - Make priv elevation thread
-safe
1660 - Pseudowire event recovery
1661 - Fix race condition
in label manager
1662 - Fix system routes selection and next
-hop tracking
1663 - Set connected route metric based on devaddr metric
1664 - Display metric
for connected routes
1665 - Add selected fib details to json output
1666 - Always use replace
if installing new route
1667 - watchfrr
: Silently ignore
declare failures
(for backward compatibility
)
1668 - RPM packages
: Switch to new init script
1670 * Thu Feb
28 2019 Martin Winter
<mwinter@opensourcerouting.org
> - 7.0
1671 - Added libyang dependency
: New work
for northbound interface based on libyang
1672 - Fabricd
: New Daemon based on https
://datatracker.ietf.org
/doc
/draft
-white
-openfabric
/
1673 - various bug fixes and other enhancements
1675 * Sun Oct
7 2018 Martin Winter
<mwinter@opensourcerouting.org
> - 6.0
1676 - Staticd
: New daemon responsible
for management of static routes
1677 - ISISd
: Implement dst
-src routing as per draft
-ietf
-isis
-ipv6
-dst
-src
-routing
1678 - BFDd
: new daemon
for BFD
(Bidrectional Forwarding Detection
). Responsible
1679 for notifying link changes to
make routing protocols converge faster.
1682 * Thu Jul
5 2018 Martin Winter
<mwinter@opensourcerouting.org
> - 5.0.1
1683 - Support Automake
1.16.1
1684 - BGPd
: Support
for flowspec ICMP
, DSCP
, packet length
, fragment and tcp flags
1685 - BGPd
: fix rpki validation
for ipv6
1686 - VRF
: Workaround
for kernel bug on Linux
4.14 and newer
1687 - Zebra
: Fix interface based routes from zebra not marked up
1688 - Zebra
: Fix large zebra memory usage when redistribute between protocols
1689 - Zebra
: Allow route
-maps to match on
source instance
1690 - BGPd
: Backport peer
-attr overrides
, peer
-level enforce
-first
-as and filtered
-routes fix
1691 - BGPd
: fix
for crash during display of filtered
-routes
1692 - BGPd
: Actually display labeled unicast routes received
1693 - Label Manager
: Fix to work correctly behind a label manager proxy
1695 * Thu Jun
7 2018 Martin Winter
<mwinter@opensourcerouting.org
> - 5.0
1696 - PIM
: Add a Multicast Trace Command draft
-ietf
-idmr
-traceroute
-ipm
-05
1697 - IS
-IS
: Implement Three
-Way Handshake as per RFC5303
1698 - BGPD
: Implement VPN
-VRF route leaking per RFC4364.
1699 - BGPD
: Implement VRF with NETNS backend
1701 - PBRD
: Add a new Policy Based Routing Daemon
1703 * Mon May
28 2018 Rafael Zalamena
<rzalamena@opensourcerouting.org
>
1706 * Sun May
20 2018 Martin Winter
<mwinter@opensourcerouting.org
>
1707 - Fixed RPKI RPM build
1709 * Sun Mar
4 2018 Martin Winter
<mwinter@opensourcerouting.org
>
1710 - Add option to build with RPKI
(default
: disabled
)
1712 * Tue Feb
20 2018 Martin Winter
<mwinter@opensourcerouting.org
>
1713 - Adapt to new documentation structure based on Sphinx
1715 * Fri Oct
20 2017 Martin Winter
<mwinter@opensourcerouting.org
>
1716 - Fix script location
for watchfrr restart functions
in daemon config
1717 - Fix postun script to restart frr during upgrade
1719 * Mon Jun
5 2017 Martin Winter
<mwinter@opensourcerouting.org
>
1720 - added NHRP and EIGRP daemon
1722 * Mon Apr
17 2017 Martin Winter
<mwinter@opensourcerouting.org
>
1723 - new subpackage frr
-pythontools with python
2.7 restart script
1724 - remove PIMd from CentOS
/RedHat
6 RPM packages
(won't work
- too old
)
1725 - converted to single frr init script
(not per daemon
) based on debian init script
1726 - created systemd service file
for systemd based systems
(which uses init script
)
1727 - Various other RPM package fixes
for FRR
2.0
1729 * Fri Jan
6 2017 Martin Winter
<mwinter@opensourcerouting.org
>
1730 - Renamed to frr
for FRRouting fork of Quagga
1732 * Thu Feb
11 2016 Paul Jakma
<paul@jakma.org
>
1733 - remove with_ipv6 conditionals
, always build v6
1734 - Fix UTF
-8 char
in spec changelog
1735 - remove quagga.pam.stack
, long deprecated.
1737 * Thu Oct
22 2015 Martin Winter
<mwinter@opensourcerouting.org
>
1738 - Cleanup configure
: remove
--enable-ipv6
(default now
), --enable-nssa
,
1740 - Remove support
for old fedora
4/5
1741 - Fix
for package nameing
1742 - Fix Weekdays of previous changelogs
(bogus dates
)
1743 - Add conditional logic to only build tex footnotes with supported texi2html
1744 - Added pimd to files section and fix double listing of
/var
/lib
*/quagga
1745 - Numerous fixes to unify upstart
/systemd startup into same spec file
1746 - Only allow use of watchfrr
for non
-systemd systems. no need with systemd
1748 * Fri Sep
4 2015 Paul Jakma
<paul@jakma.org
>
1750 - add a default define
for with_pimd
1752 * Mon Sep
12 2005 Paul Jakma
<paul@dishone.st
>
1753 - Steal some changes from Fedora spec file
:
1754 - Add with_rtadv variable
1755 - Test
for groups
/users with getent before group
/user adding
1756 - Readline need not be an explicit prerequisite
1757 - install-info delete should be postun
, not preun
1759 * Wed Jan
12 2005 Andrew J. Schorr
<ajschorr@alumni.princeton.edu
>
1760 - on package upgrade
, implement careful
, phased restart logic
1761 - use gcc
-rdynamic flag when linking
for better backtraces
1763 * Wed Dec
22 2004 Andrew J. Schorr
<ajschorr@alumni.princeton.edu
>
1764 - daemonv6_list should contain only IPv6 daemons
1766 * Wed Dec
22 2004 Andrew J. Schorr
<ajschorr@alumni.princeton.edu
>
1768 - on upgrade
, all daemons should be condrestart'ed
1769 - on removal
, all daemons should be stopped
1771 * Mon Nov
08 2004 Paul Jakma
<paul@dishone.st
>
1772 - Use makeinfo
--html to generate quagga.html
1774 * Sun Nov
07 2004 Paul Jakma
<paul@dishone.st
>
1775 - Fix with_ipv6
set to
0 build
1777 * Sat Oct
23 2004 Paul Jakma
<paul@dishone.st
>
1780 * Sat Oct
23 2004 Andrew J. Schorr
<aschorr@telemetry
-investments.com
>
1781 - Make directories be owned by the packages concerned
1782 - Update logrotate scripts to use correct path to killall and use pid files
1784 * Fri Oct
08 2004 Paul Jakma
<paul@dishone.st
>
1787 * Wed Sep
15 2004 Paul Jakma
<paul@dishone.st
>
1788 - build snmp support by default
1789 - build irdp support
1790 - build with shared libs
1791 - devel subpackage
for archives and headers
1793 * Thu Jan
08 2004 Paul Jakma
<paul@dishone.st
>
1794 - updated sysconfig files to specify
local dir
1795 - added ospf_dump.c crash quick fix patch
1796 - added ospfd persistent interface configuration patch
1798 * Tue Dec
30 2003 Paul Jakma
<paul@dishone.st
>
1800 - integrate RH sysconfig patch to specify daemon options
(RH
)
1801 - default to have vty listen only to
127.1 (RH
)
1802 - add user with fixed UID
/GID
(RH
)
1803 - create user with shell
/sbin
/nologin rather than
/bin
/false
(RH
)
1804 - stop daemons on uninstall
(RH
)
1805 - delete info file on preun
, not postun to avoid deletion on upgrade.
(RH
)
1807 - cleanup tasks carried out
for every daemon
1809 * Sun Nov
2 2003 Paul Jakma
<paul@dishone.st
>
1810 - Fix
-devel package to include all files
1813 * Tue Aug
12 2003 Paul Jakma
<paul@dishone.st
>
1815 - Sync to Quagga release
0.96
1817 * Thu Mar
20 2003 Paul Jakma
<paul@dishone.st
>
1818 - zebra privileges support
1820 * Tue Mar
18 2003 Paul Jakma
<paul@dishone.st
>
1821 - Fix mem leak
in 'show thread cpu'
1822 - Ralph Keller's OSPF
-API
1823 - Amir
: Fix configure.ac
for net
-snmp
1825 * Sat Mar
1 2003 Paul Jakma
<paul@dishone.st
>
1826 - ospfd IOS prefix to interface matching
for 'network' statement
1827 - temporary fix
for PtP and IPv6
1828 - sync to zebra.org CVS
1830 * Mon Jan
20 2003 Paul Jakma
<paul@dishone.st
>
1831 - update to latest cvs
1832 - Yon's "show thread cpu" patch
- 17217
1833 - walk up tree
- 17218
1834 - ospfd NSSA fixes
- 16681
1835 - ospfd nsm fixes
- 16824
1836 - ospfd OLSA fixes and new feature
- 16823
1837 - KAME and ifindex fixes
- 16525
1838 - spec file changes to allow redhat files to be
in tree
1840 * Sat Dec
28 2002 Alexander Hoogerhuis
<alexh@ihatent.com
>
1841 - Added conditionals
for building with
(out
) IPv6
, vtysh
, RIP
, BGP
1842 - Fixed up some build requirements
(patch
)
1843 - Added conditional build requirements
for vtysh
/ snmp
1844 - Added conditional to files
for _bindir depending on vtysh
1846 * Mon Nov
11 2002 Paul Jakma
<paulj@alphyra.ie
>
1847 - update to latest CVS
1848 - add Greg Troxel's md5 buffer copy
/dup fix
1850 - add Frank's multicast flag fix
1852 * Wed Oct
09 2002 Paul Jakma
<paulj@alphyra.ie
>
1853 - update to latest CVS
1854 - timestamped crypt_seqnum patch
1855 - oi
->on_write_q fix
1857 * Mon Sep
30 2002 Paul Jakma
<paulj@alphyra.ie
>
1858 - update to latest CVS
1859 - add vtysh 'write
-config
(integrated|daemon
)' patch
1860 - always '
make rebuild'
in vtysh
/ to catch new commands
1862 * Fri Sep
13 2002 Paul Jakma
<paulj@alphyra.ie
>
1865 * Wed Sep
11 2002 Paul Jakma
<paulj@alphyra.ie
>
1866 - update to latest CVS
1867 - add "
/sbin
/ip route flush proto zebra" to zebra RH init on startup
1869 * Sat Aug
24 2002 Paul Jakma
<paulj@alphyra.ie
>
1870 - update to current CVS
1871 - add OSPF point to multipoint patch
1873 - add BGP
hash optimisation patch
1875 * Fri Jun
14 2002 Paul Jakma
<paulj@alphyra.ie
>
1876 - update to
0.93-pre1
/ CVS
1877 - add link state detection support
1878 - add generic PtP and RFC3021 support
1881 * Thu Aug
09 2001 Elliot Lee
<sopwith@redhat.com
> 0.91a
-6
1884 * Wed Aug
1 2001 Trond Eivind Glomsrød
<teg@redhat.com
> 0.91a
-5
1885 - Use generic initscript strings instead of initscript specific
1886 ( "Starting foo
: "
-> "Starting $prog
:"
)
1888 * Fri Jul
27 2001 Elliot Lee
<sopwith@redhat.com
> 0.91a
-4
1889 - Bump the release when rebuilding into the dist.
1891 * Tue Feb
6 2001 Tim Powers
<timp@redhat.com
>
1892 - built
for Powertools
1894 * Sun Feb
4 2001 Pekka Savola
<pekkas@netcore.
fi>
1895 - Hacked up from PLD Linux
0.90-1, Mandrake
0.90-1mdk and one from zebra.org.
1897 - Very heavy modifications to init.d
/*, .spec
, pam
, i18n
, logrotate
, etc.
1898 - Should be quite Red Hat'isque now.