3 # Some can be overridden on rpmbuild commandline with:
4 # rpmbuild --define 'variable value'
5 # (use any value, ie 1 for flag "with_XXXX" definitions)
7 # E.g. rpmbuild --define 'release_rev 02' may be useful if building
8 # rpms again and again on the same day, so the newer rpms can be installed.
9 # bumping the number each time.
11 #################### FRRouting (FRR) configure options #####################
12 # with-feature options
13 %{!?with_babeld: %global with_babeld 1 }
14 %{!?with_bfdd: %global with_bfdd 1 }
15 %{!?with_bgp_vnc: %global with_bgp_vnc 0 }
16 %{!?with_cumulus: %global with_cumulus 0 }
17 %{!?with_eigrpd: %global with_eigrpd 1 }
18 %{!?with_fpm: %global with_fpm 1 }
19 %{!?with_ldpd: %global with_ldpd 1 }
20 %{!?with_multipath: %global with_multipath 256 }
21 %{!?with_nhrpd: %global with_nhrpd 1 }
22 %{!?with_ospfapi: %global with_ospfapi 1 }
23 %{!?with_ospfclient: %global with_ospfclient 1 }
24 %{!?with_pam: %global with_pam 0 }
25 %{!?with_pbrd: %global with_pbrd 1 }
26 %{!?with_pimd: %global with_pimd 1 }
27 %{!?with_pim6d: %global with_pim6d 0 }
28 %{!?with_vrrpd: %global with_vrrpd 1 }
29 %{!?with_rtadv: %global with_rtadv 1 }
30 %{!?with_watchfrr: %global with_watchfrr 1 }
31 %{!?with_pathd: %global with_pathd 1 }
34 %{!?frr_user: %global frr_user frr }
35 %{!?vty_group: %global vty_group frrvty }
38 %define configdir
%{_sysconfdir}/%{name}
39 %define _sbindir
/usr
/lib
/frr
40 %define zeb_src
%{_builddir}/%{name}-%{frrversion}
41 %define zeb_rh_src
%{zeb_src}/redhat
42 %define zeb_docs
%{zeb_src}/doc
43 %define frr_tools
%{zeb_src}/tools
45 # defines for configure
46 %define rundir
%{_localstatedir}/run/%{name}
48 ############################################################################
50 #### Version String tweak
51 # Remove invalid characters form version string and replace with _
52 %{expand: %%global rpmversion %(echo '@VERSION@' | tr [:blank:]- _ )}
53 %define frrversion @VERSION@
55 #### Check for systemd or init.d (upstart)
56 # Check for init.d (upstart) as used in CentOS 6 or systemd (ie CentOS 7)
57 %if 0%{?fedora} || 0%{?rhel} >= 7 || 0%{?suse_version} >= 1210
58 %global initsystem systemd
60 %if 0%{?rhel} && 0%{?rhel} < 7
61 %global initsystem upstart
63 %{expand: %%global initsystem %(if [[ `/sbin/init --version 2> /dev/null` =~ upstart ]]; then echo upstart; elif [[ `readlink -f /sbin/init` = /usr/lib/systemd/systemd ]]; then echo systemd; elif [[ `systemctl` =~ -\.mount ]]; then echo systemd; fi)}
67 # Check for python version - use python2.7 on CentOS 6, otherwise python3
68 %if 0%{?rhel} && 0%{?rhel} < 7
74 # If init system is systemd, then always enable watchfrr
75 %if "
%{initsystem}"
== "systemd"
76 %global with_watchfrr
1
79 #### Check for RedHat 6.x or CentOS 6.x - they are too old to support PIM.
80 #### Always disable it on these old systems unconditionally
82 # if CentOS / RedHat and version < 7, then disable PIMd (too old, won't work)
83 %if 0%{?rhel} && 0%{?rhel} < 7
88 # misc internal defines
89 %{!?frr_uid: %global frr_uid 92 }
90 %{!?frr_gid: %global frr_gid 92 }
91 %{!?vty_gid: %global vty_gid 85 }
93 %define daemon_list zebra ripd ospfd bgpd isisd ripngd ospf6d pbrd staticd bfdd fabricd pathd
96 %define daemon_ldpd ldpd
98 %define daemon_ldpd ""
102 %define daemon_pimd pimd
104 %define daemon_pimd ""
108 %define daemon_pim6d pim6d
110 %define daemon_pim6d ""
114 %define daemon_pbrd pbrd
116 %define daemon_pbrd ""
120 %define daemon_nhrpd nhrpd
122 %define daemon_nhrpd ""
126 %define daemon_eigrpd eigrpd
128 %define daemon_eigrpd ""
132 %define daemon_babeld babeld
134 %define daemon_babeld ""
138 %define daemon_vrrpd vrrpd
140 %define daemon_vrrpd ""
144 %define daemon_watchfrr watchfrr
146 %define daemon_watchfrr ""
150 %define daemon_bfdd bfdd
152 %define daemon_bfdd ""
156 %define daemon_pathd pathd
158 %define daemon_pathd ""
161 %define all_daemons
%{daemon_list} %{daemon_ldpd} %{daemon_pimd} %{daemon_pim6d} %{daemon_nhrpd} %{daemon_eigrpd} %{daemon_babeld} %{daemon_watchfrr} %{daemon_pbrd} %{daemon_bfdd} %{daemon_vrrpd} %{daemon_pathd}
163 #release sub-revision (the two digits after the CONFDATE)
164 %{!?release_rev: %global release_rev 01 }
166 Summary: Routing daemon
168 Version: %{rpmversion}
169 Release: %{release_rev}%{?dist}
171 Group: System Environment
/Daemons
172 Source0: https
://github.com
/FRRouting
/frr
/archive
/%{name}-%{frrversion}.tar.gz
173 URL: https
://www.frrouting.org
174 Requires(pre
): shadow
-utils
175 Requires(preun
): info
177 BuildRequires
: bison
>= 2.7
178 BuildRequires
: c
-ares
-devel
181 BuildRequires
: json
-c
-devel
182 BuildRequires
: libcap
-devel
184 BuildRequires
: ncurses
-devel
185 BuildRequires
: readline
-devel
186 BuildRequires
: texinfo
187 BuildRequires
: libyang2
-devel
188 %if 0%{?rhel} && 0%{?rhel} < 7
189 #python27-devel is available from ius community repo for RedHat/CentOS 6
190 BuildRequires
: python27
-devel
191 BuildRequires
: python27
-sphinx
194 BuildRequires
: python
-devel
>= 2.7
195 BuildRequires
: python
-sphinx
197 BuildRequires
: python3
-devel
198 BuildRequires
: python3
-sphinx
202 #platform-python-devel is needed for /usr/bin/pathfix.py
203 BuildRequires
: platform
-python
-devel
205 Requires: initscripts
207 BuildRequires
: pam
-devel
209 %if "
%{initsystem}"
== "systemd"
210 BuildRequires
: systemd
211 BuildRequires
: systemd
-devel
212 Requires(post
): systemd
213 Requires(preun
): systemd
214 Requires(postun
): systemd
216 Requires(post
): chkconfig
217 Requires(preun
): chkconfig
218 # Initscripts > 5.60 is required for IPv6 support
219 Requires(pre
): initscripts
>= 5.60
221 Provides: routingdaemon
= %{version}-%{release}
222 Obsoletes
: gated mrt zebra frr
-sysvinit
227 FRRouting is a free software that manages TCP
/IP based routing
228 protocol. It takes multi
-server and multi
-thread approach to resolve
229 the current complexity of the Internet.
231 FRRouting supports BGP4
, OSPFv2
, OSPFv3
, ISIS
, RIP
, RIPng
, PIM
, LDP
232 NHRP
, Babel
, PBR
, EIGRP and BFD.
234 FRRouting is a fork of Quagga.
238 Summary: contrib tools
for frr
239 Group: System Environment
/Daemons
242 Contributed
/3rd party tools which may be of use with frr.
246 Summary: python tools
for frr
247 %if 0%{?rhel} && 0%{?rhel} < 7
248 #python27 is available from ius community repo for RedHat/CentOS 6
249 BuildRequires
: python27
250 Requires: python27
-ipaddress
253 BuildRequires
: python2
254 Requires: python2
-ipaddress
256 BuildRequires
: python3
259 Group: System Environment
/Daemons
261 %description pythontools
262 Contributed python
2.7 tools which may be of use with frr.
266 Summary: Header and object files
for frr development
267 Group: System Environment
/Daemons
268 Requires: %{name} = %{version}-%{release}
271 The frr
-devel package contains the header and object files necessary
for
272 developing OSPF
-API and frr applications.
276 Summary: BGP RPKI support
(rtrlib
)
277 Group: System Environment
/Daemons
278 BuildRequires
: librtr
-devel
>= 0.8
279 Requires: %{name} = %{version}-%{release}
281 %description rpki
-rtrlib
282 Adds RPKI support to FRR's bgpd
, allowing validation of BGP routes
283 against cryptographic information stored
in WHOIS databases. This is
284 used to prevent hijacking of networks on the wider internet. It is only
285 relevant to internet service providers using their own autonomous system
290 Summary: SNMP support
291 Group: System Environment
/Daemons
292 BuildRequires
: net
-snmp
-devel
293 Requires: %{name} = %{version}-%{release}
296 Adds SNMP support to FRR's daemons by attaching to net
-snmp's snmpd
297 through the AgentX protocol.
Provides read-only access to current
298 routing state through standard SNMP MIBs.
302 %setup -q
-n frr
-%{frrversion}
307 # For standard gcc verbosity, uncomment these lines:
308 #CFLAGS="%{optflags} -Wall -Wsign-compare -Wpointer-arith"
309 #CFLAGS="${CFLAGS} -Wbad-function-cast -Wwrite-strings"
311 # For ultra gcc verbosity, uncomment these lines also:
312 #CFLAGS="${CFLAGS} -W -Wcast-qual -Wstrict-prototypes"
313 #CFLAGS="${CFLAGS} -Wmissing-declarations -Wmissing-noreturn"
314 #CFLAGS="${CFLAGS} -Wmissing-format-attribute -Wunreachable-code"
315 #CFLAGS="${CFLAGS} -Wpacked -Wpadded"
318 --sbindir
=%{_sbindir} \
319 --sysconfdir
=%{configdir} \
320 --localstatedir
=%{rundir} \
324 %if %{with_multipath}
325 --enable-multipath
=%{with_multipath} \
328 %if %{with_ospfclient}
329 --enable-ospfclient \
331 --disable
-ospfclient\
387 --enable-user
=%{frr_user} \
388 --enable-group
=%{frr_user} \
391 --enable-vty
-group
=%{vty_group} \
412 %if "
%{initsystem}"
== "systemd"
429 make %{?_smp_mflags} MAKEINFO
="makeinfo
--no
-split"
432 # Change frr-reload.py to use python2.7
433 sed
-e '
1c
#!/usr/bin/python2.7' -i %{zeb_src}/tools/frr-reload.py
434 sed
-e '
1c
#!/usr/bin/python2.7' -i %{zeb_src}/tools/generate_support_bundle.py
436 # Change frr-reload.py to use python3
437 sed
-e '
1c
#!/usr/bin/python3' -i %{zeb_src}/tools/frr-reload.py
438 sed
-e '
1c
#!/usr/bin/python3' -i %{zeb_src}/tools/generate_support_bundle.py
447 mkdir -p
%{buildroot}%{_sysconfdir}/{frr,sysconfig,logrotate.d,pam.d,default} \
448 %{buildroot}%{_infodir}
449 mkdir -m
0755 -p
%{buildroot}%{_localstatedir}/log
/frr
450 make DESTDIR
=%{buildroot} INSTALL
="
install -p" CP
="cp
-p"
install
452 # Remove this file, as it is uninstalled and causes errors when building on RH9
453 rm -rf
%{buildroot}/usr
/share
/info
/dir
455 # Remove debian init script if it was installed
456 rm -f
%{buildroot}%{_sbindir}/frr
458 # kill bogus libtool files
459 rm -vf
%{buildroot}%{_libdir}/frr
/modules
/*.la
460 rm -vf
%{buildroot}%{_libdir}/*.la
461 rm -vf
%{buildroot}%{_libdir}/frr
/libyang_plugins
/*.la
463 # install /etc sources
464 %if "
%{initsystem}"
== "systemd"
465 mkdir -p
%{buildroot}%{_unitdir}
466 install -m644
%{zeb_src}/tools/frr.service %{buildroot}%{_unitdir}/frr.service
468 mkdir -p
%{buildroot}%{_initddir}
469 ln
-s
%{_sbindir}/frrinit.sh %{buildroot}%{_initddir}/frr
472 install %{zeb_src}/tools/etc/frr/daemons %{buildroot}%{_sysconfdir}/frr
473 install %{zeb_src}/tools/etc/frr/frr.conf %{buildroot}%{_sysconfdir}/frr
/frr.conf.template
474 install -m644
%{zeb_rh_src}/frr.pam %{buildroot}%{_sysconfdir}/pam.d
/frr
475 install -m644
%{zeb_rh_src}/frr.logrotate %{buildroot}%{_sysconfdir}/logrotate.d
/frr
476 install -d
-m750
%{buildroot}%{rundir}
478 %if 0%{?rhel} > 7 || 0%{?fedora} > 29
479 # avoid `ERROR: ambiguous python shebang in` errors
480 pathfix.py
-pni "
%{__python3} %{py3_shbang_opts}" %{buildroot}/usr
/lib
/frr
/*.py
481 %py_byte_compile %{__python3} %{buildroot}/usr
/lib
/frr
/*.py
483 # remove ospfclient.py (if present) as it requires > python36
484 rm -f
%{buildroot}%{_sbindir}/ospfclient.py
490 getent group
%{vty_group} >/dev/null || groupadd -r -g %{vty_gid} %{vty_group}
493 # add frr user and group
495 # Ensure that frr_gid gets correctly allocated
496 getent group
%{frr_user} >/dev/null || groupadd -g %{frr_gid} %{frr_user}
497 getent passwd
%{frr_user} >/dev
/null || \
498 useradd
-r
-u
%{frr_uid} -g %{frr_user} \
499 -s
/sbin
/nologin
-c "FRRouting suite" \
500 -d
%{rundir} %{frr_user}
503 usermod
-a
-G
%{vty_group} %{frr_user}
510 # zebra_spec_add_service <service name> <port/proto> <comment>
511 # e.g. zebra_spec_add_service zebrasrv 2600/tcp "zebra service"
513 zebra_spec_add_service
()
515 # Add port /etc/services entry if it isn't already there
516 if [ -f
%{_sysconfdir}/services
] && \
517 ! %__sed -e 's
/#.*$//' %{_sysconfdir}/services 2>/dev/null | %__grep -wq $1 ; then
518 echo "$
1 $
2 # $3" >> %{_sysconfdir}/services
522 zebra_spec_add_service zebrasrv
2600/tcp "zebra service"
523 zebra_spec_add_service zebra
2601/tcp "zebra vty"
524 zebra_spec_add_service staticd
2616/tcp "staticd vty"
525 zebra_spec_add_service ripd
2602/tcp "RIPd vty"
526 zebra_spec_add_service ripngd
2603/tcp "RIPngd vty"
527 zebra_spec_add_service ospfd
2604/tcp "OSPFd vty"
528 zebra_spec_add_service bgpd
2605/tcp "BGPd vty"
529 zebra_spec_add_service ospf6d
2606/tcp "OSPF6d vty"
530 zebra_spec_add_service isisd
2608/tcp "ISISd vty"
532 zebra_spec_add_service ospfapi
2607/tcp "OSPF
-API"
535 zebra_spec_add_service babeld
2609/tcp "BABELd vty"
538 zebra_spec_add_service nhrpd
2610/tcp "NHRPd vty"
541 zebra_spec_add_service pimd
2611/tcp "PIMd vty"
544 zebra_spec_add_service pbrd
2615/tcp "PBRd vty"
547 zebra_spec_add_service ldpd
2612/tcp "LDPd vty"
550 zebra_spec_add_service eigrpd
2613/tcp "EIGRPd vty"
553 zebra_spec_add_service bfdd
2617/tcp "BFDd vty"
555 zebra_spec_add_service fabricd
2618/tcp "Fabricd vty"
557 zebra_spec_add_service vrrpd
2619/tcp "VRRPd vty"
560 zebra_spec_add_service pathd
2620/tcp "Pathd vty"
563 %if "
%{initsystem}"
== "systemd"
564 for daemon
in %all_daemons ; do
565 %systemd_post frr.service
568 /sbin
/chkconfig
--add frr
571 # Fix bad path in previous config files
572 # Config files won't get replaced by default, so we do this ugly hack to fix it
573 %__sed -i 's|watchfrr_options
=|
#watchfrr_options=|g' %{configdir}/daemons 2> /dev/null || true
575 # With systemd, watchfrr is mandatory. Fix config to make sure it's enabled if
576 # we install or upgrade to a frr built with systemd
577 %if "
%{initsystem}"
== "systemd"
578 %__sed -i 's|watchfrr_enable
=no|watchfrr_enable
=yes|g'
%{configdir}/daemons
2> /dev
/null || true
581 /sbin
/install-info
%{_infodir}/frr.info.gz %{_infodir}/dir
583 # Create dummy config file if they don't exist so basic functions can be used.
584 if [ ! -e
%{configdir}/frr.conf ] && [ ! -e %{configdir}/zebra.conf
]; then
585 # No frr.conf and per daemon configs exist
586 mv
%{configdir}/frr.conf.template %{configdir}/frr.conf
588 chown
%{frr_user}:%{frr_user} %{configdir}/frr.conf
590 chmod
640 %{configdir}/frr.conf
593 chown
%{frr_user}:%{frr_user} %{configdir}/daemons
597 # No config for watchfrr - this is part of /etc/sysconfig/frr
598 rm -f
%{configdir}/watchfrr.
*
601 if [ ! -e
%{configdir}/vtysh.conf
]; then
602 touch
%{configdir}/vtysh.conf
603 chmod
640 %{configdir}/vtysh.conf
606 chown
%{frr_user}:%{vty_group} %{configdir}/vtysh.conf
*
613 if [ "$
1"
-ge
1 ]; then
615 # Upgrade from older version
617 %if "
%{initsystem}"
== "systemd"
621 %systemd_postun_with_restart frr.service
626 service frr restart
>/dev
/null
2>&1
633 %if "
%{initsystem}"
== "systemd"
637 if [ $
1 -eq
0 ] ; then
638 %systemd_preun frr.service
644 if [ $
1 -eq
0 ] ; then
645 service frr stop
>/dev
/null
2>&1
646 /sbin
/chkconfig
--del frr
649 /sbin
/install-info
--delete
%{_infodir}/frr.info.gz %{_infodir}/dir
656 /usr
/share
/yang
/*.yang
658 %dir %attr(751,%{frr_user},%{frr_user}) %{configdir}
659 %dir %attr(755,%{frr_user},%{frr_user}) %{_localstatedir}/log
/frr
660 %dir %attr(751,%{frr_user},%{frr_user}) %{rundir}
662 %dir %attr(750,root
,root
) %{configdir}
663 %dir %attr(755,root
,root
) %{_localstatedir}/log
/frr
664 %dir %attr(750,root
,root
) %{rundir}
666 %{_infodir}/frr.info.gz
673 %exclude %{_sbindir}/ssd
710 %{_libdir}/frr
/modules
/pathd_pcep.so
712 %{_libdir}/libfrr.so
*
713 %{_libdir}/libfrrcares
*
714 %{_libdir}/libfrrospf
*
716 %{_libdir}/frr
/modules
/zebra_fpm.so
718 %{_libdir}/frr
/modules
/zebra_cumulus_mlag.so
719 %{_libdir}/frr
/modules
/dplane_fpm_nl.so
720 %{_libdir}/frr
/modules
/zebra_irdp.so
721 %{_libdir}/frr
/modules
/bgpd_bmp.so
723 %config(noreplace
) %{configdir}/[!v
]*.conf
*
724 %config(noreplace
) %attr(750,%{frr_user},%{frr_user}) %{configdir}/daemons
725 %if "
%{initsystem}"
== "systemd"
726 %{_unitdir}/frr.service
730 %config(noreplace
) %{_sysconfdir}/pam.d
/frr
731 %config(noreplace
) %{_sysconfdir}/logrotate.d
/frr
732 %{_sbindir}/frr
-reload
733 %{_sbindir}/frrcommon.sh
734 %{_sbindir}/frrinit.sh
735 %{_sbindir}/watchfrr.sh
742 %{_sbindir}/generate_support_bundle.py
743 %{_sbindir}/frr
-reload.py
744 %{_sbindir}/frr_babeltrace.py
745 %if %{with_ospfclient} && (0%{?rhel} > 7 || 0%{?fedora} > 29)
746 %{_sbindir}/ospfclient.py
748 %if 0%{?rhel} > 7 || 0%{?fedora} > 29
749 %{_sbindir}/__pycache__
/*
751 %{_sbindir}/generate_support_bundle.pyc
752 %{_sbindir}/generate_support_bundle.pyo
753 %{_sbindir}/frr
-reload.pyc
754 %{_sbindir}/frr
-reload.pyo
755 %{_sbindir}/frr_babeltrace.pyc
756 %{_sbindir}/frr_babeltrace.pyo
761 # add rpki module to daemons
762 sed
-i
-e 's
/^\
(bgpd_options
=\
)\
(.
*\
)\
(".
*\
)/\
1\
2 -M rpki\
3/'
%{_sysconfdir}/frr
/daemons
765 # remove rpki module from daemons
766 sed
-i 's
/ -M rpki
//'
%{_sysconfdir}/frr
/daemons
769 %{_libdir}/frr
/modules
/bgpd_rpki.so
773 %{_libdir}/libfrrsnmp.so
*
774 %{_libdir}/frr
/modules
/*snmp.so
779 %dir %{_includedir}/%{name}
780 %{_includedir}/%{name}/*.h
781 %dir %{_includedir}/%{name}/ospfd
782 %{_includedir}/%{name}/ospfd
/*.h
784 %dir %{_includedir}/%{name}/bfdd
785 %{_includedir}/%{name}/bfdd
/bfddp_packet.h
788 %dir %{_includedir}/%{name}/ospfapi
789 %{_includedir}/%{name}/ospfapi
/*.h
792 %dir %{_includedir}/%{name}/eigrpd
793 %{_includedir}/%{name}/eigrpd
/*.h
799 * Wed Jul
20 2022 Martin Winter
<mwinter@opensourcerouting.org
> - %{version}
801 * Wed Jul
13 2022 Jafar Al
-Gharaibeh
<jafar@atcorp.com
> - 8.3
803 - Add camelcase json keys
in addition to pascalcase
(Wrong JSON keys will be depracated
)
804 - Fix corruption when route
-map delete
/add sequence happens
(fast re
-add
)
806 - RFC5424
& journald extended syslog target
808 - Fix broken FSM
in active
/passive modes
810 - Notification Message Support
for BGP Graceful Restart
(rfc8538
)
811 - BGP Cease Notification Subcode For BFD
812 - Send Hold Timer
for BGP
(own implementation without an additional knob
)
813 - New `
set as
-path replace`
command for BGP route
-map
814 - New `match peer`
command for BGP route
-map
815 - New `ead
-es
-frag evi
-limit`
command for EVPN
816 - New `match evpn route
-type`
command for EVPN route
-map to match Type
-1/Type
-4
817 - JSON outputs
for all RPKI show commands
818 - Set attributes via route
-map
for BGP conditional advertisements
819 - Pass non
-transitive extended communities between RS and RS
-clients
820 - Send MED attribute when aggregate prefix is created
821 - Fix aspath memory leak
in aggr_suppress_map_test
822 - Fix crash
for `show ip bgp vrf all all neighbors
192.168.0.1 ...`
823 - Fix crash
for `show ip bgp vrf all all`
824 - Fix memory leak
for BGP Community Alias
in CLI
825 - Fix memory leak when setting BGP community at egress
826 - Fix memory leak when setting BGP large
-community at egress
827 - Fix SR color nexthop processing
in BGP
828 - Fix setting
local-preference
in route
-map using
+/-
829 - Fix crash using Lua and route
-map to
set attributes via scripts
830 - Fix crash when issuing various forms of `bgp no
-rib`
832 - JSON output
for show summary
command
833 - Fix crash when MTU mismatch occurs
834 - Fix crash with xfrm interface
type
835 - Fix infinite loop when parsing LSPs
836 - Fix router capability TLV parsing issues
838 - New `show thread timers`
command
840 - Add LSA statistics to LSA database
841 - Add LSA stats to `show area json` output
842 - Show
time left
in hello timer
for `show ipv6 ospf6 int`
843 - Restart SPF when distance is updated
844 - Support keychain
for ospf6 authentication
846 - New `show ip ospf reachable
-routers`
command
847 - Restart SPF when distance is updated
848 - Use consistent JSON keys
for `show ip ospf neighbor` and detail version
850 - Add additional IGMP stats
851 - Add IGMP join sent
/failed statistics
852 - Add IGMP total groups and total
source groups to statistics
853 - New `debug igmp trace detail`
command
854 - New `ip pim passive`
command
855 - JSON support added
for command `show ip igmp sources`
856 - Allow the LPM match work properly with prefix lists and normal RPs
857 - Do not allow
224.0.0.0/24 range
in IGMP join
858 - Fix IGMP packet
/query check
859 - Handle PIM join
/prune receive flow
for IPv6
860 - Handle receive of
(*,G
) register stop with
source address as
0
861 - Handle of exclude mode IGMPv3 report messages
for SSM
-aware group
862 - Handle of IGMPv2 report message
for SSM
-aware group range
863 - Send immediate join with possible sg rpt prune bit
set
864 - Show group
-type under `show ip pim rp
-info`
865 - Show total received messages IGMP stats
867 - Capture zebra advertised ECMP limit
868 - Do not register existing nexthop to Zebra
869 - Reject route config with too many nexthops
870 - Track nexthops per
-safi
872 - Add some more information to `show watchfrr`
873 - Send operational state to systemd
875 - Add ability to know when FRR is not ASIC offloaded
876 - Add
command for setting protodown bit
877 - Add dplane
type for netconf data
878 - Add ECMP supported to `show zebra`
879 - Add EVPN status to `show zebra`
880 - Add
if v4
/v6 forwarding is turned on
/off to `show zebra`
881 - Add initial zebra tracepoint support
882 - Add kernel nexthop group support to `show zebra`
883 - Add knowledge about ra and rfc
5549 to `show zebra`
884 - Add mpls status to `show zebra`
885 - Add netlink debug dump
for netconf messages
886 - Add netlink debugs
for ip rules
887 - Add OS and version to `show zebra`
888 - Add support
for end.dt4
889 - Add to `show zebra` the
type of vrf devices being used
890 - Allow
*BSD to specify a receive buffer size
891 - Allow multiple connected routes to be choosen
for kernel routes
892 - Allow system routes to recurse through themselves
893 - Do not send RAs w
/o link
-local v6 or on bridge
-ports
894 - Evpn disable remove l2vni from l3vni list
895 - Evpn
-mh bonds protodown check
for set
896 - Evpn
-mh use protodown update reason api
897 - Fix cleanup of meta queues on vrf disable
898 - Fix crash
in evpn neigh cleanup all
899 - Fix missing delete vtep during vni transition
900 - Fix missing vrf change of l2vni on vxlan interface
901 - Fix rtadv startup when config
read in is before interface up
902 - Fix use after deletion event
in FreeBSD
903 - Fix v6 route replace failure turned into success
904 - Get zebra graceful restart working when restarting on
*BSD
905 - Handle FreeBSD routing socket enobufs
906 - Handle protodown netlink
for vxlan device
907 - Include mpls enabled status
in interface output
908 - Include old reason
in evpn
-mh bond update
909 - Keep the interface flags safe on multiple ioctl calls
910 - Let
/32 host route with same ip cross vrf
911 - Make router advertisement warnings show up once every
6 hours
912 - Prevent crash
if zebra_route_all is used
for a route
type
913 - Prevent installation of connected multiple
times
914 - Protodown
-up event trigger interface up
915 - Register nht nexthops with proper safi
916 - Update advertise
-svi
-ip macips w
/ new mac
917 - When handling unprocessed messages from kernel print usable string
918 - New `show ip nht mrib`
command
919 - Handle ENOBUFS errors
for FreeBSD
921 * Tue Mar
1 2022 Jafar Al
-Gharaibeh
<jafar@atcorp.com
> - 8.2
922 - The FRRouting community would like to announce FRR
Release 8.2.
923 - This release consists of just over
800 commits from
62 authors.
924 - Selected features and bug fixes are listed below.
926 - Fix the checks
for truncated packets
928 - Correct one spelling error of comment
929 - Fix detection timeout update
930 - Fix possibly wrong counter of control packets
932 - Add "json" option to a few more show commands
933 - Add 'show bgp
<afi
> <safi
> json detail' header data
934 - Add a
6 hour warning to missing policy
935 - Add an ability to match ipv6 next
-hop by prefix
-list
936 - Add autocomplete
for access
-list under bmp node
937 - Add autocomplete
for as
-path filters
938 - Add autocomplete
for set/match community
/large
/ext lists
939 - Add long
-lived graceful restart capability
940 - Add peer
-groups to neighbor autocomplete
941 - Adjust symbolic names
for cease notifications according to rfc4486
942 - Deprecate dpa
, advertiser and rcid_path path attributes
943 - Extended bgp administrative shutdown communication
944 - Fix crash when using "show bgp vrf all"
945 - Fix inconsistency of match ip
/ipv6 next
-hop commands
946 - Fix missing name of default vrf
947 - Handle TCP connection errors with connection callbacks
for RPKI
948 - Implement llgr helper mode
950 - Support redirect import more than one route
-target ipv6
952 - Update alpine build
enable set own version
954 - Add link state traffic engineering support
955 - Fix router capability tlv parsing issues
956 - Fix running
-config
for fast
-reroute
957 - Make isis work with default vrf name different than 'default'
959 - Add missing vrf parameter to "clear ipv6 ospf6 interface"
960 - Add prompt
for commands with non
-exist vrf
961 - Add support
for nssa
type-7 address ranges
962 - Add the ability of specifying router
-id
/area
-id
in no debug ospf6
963 - Do not originate
type-4 lsa when nssa
964 - Do not send
type-5 into stub area
965 - Fix ecmp inter
-area route nexthop update
966 - Fix memory leak
for `show ipv6 ospf6 zebra json`
968 - Fix wrong comparison of routemap name
969 - Fix crash on "ospf send
-extra
-data zebra"
970 - Fix incorrect detection of topology changes
in helper mode
971 - Fix loss of mixed form
in "range"
command
972 - Fix no
-form of "graceful
-restart"
command
973 - Fix summary
-address deletion
974 - Fix wrong parsing of te subtlv
976 - Add vlan actions to vty
977 - Pbr route maps get addr family of nhgs
978 - Protect from a possible null dereference
980 - Do not allow
224.0.0.0/24 range
in igmp join
981 - Fix igmp user config
982 - Fix msdp mesh grp with wildcard member addr
983 - Fix stale forwarding entries left around after join goes away
984 - Fix FRR drops IGMP packets
for TOS value other than
0XC0
986 - Check
if frr.conf already exists
987 - Logrotate file has typo
for staticd
989 - Fix packet send
for non primary addresses
991 - Add missing rpki node when showing config
992 - Improve startup
time by ca. Ă—
6
993 - remove `address
-family evpn`
995 - Allow an integrated config to work within a namespace
997 - Add optional nhg id output to `show ip ro`
998 - Add resolver flag
for nexthop
in json
999 - Add support
for json output
in srv6 locator detail
command
1000 - Don't lose next hop weights
while exporting via fpm
1001 - Fix buffer overflow
1002 - Fix netns deletion
1003 - Fix route
-map application when when using vrfs
1005 * Tue Nov
2 2021 Jafar Al
-Gharaibeh
<jafar@atcorp.com
> - 8.1
1006 - FRR
8.1 brings a long list of enhancements and fixes with
1200 commits from
1007 - 75 developers. Thanks to all contributers.
1009 - Lua hooks are now feature complete
, with one hook available
for use
(http
://docs.frrouting.org
/en
/latest
/scripting.html
)
1010 - Improvements to SRv6
(Segment Routing over IPv6
) (http
://docs.frrouting.org
/en
/latest
/zebra.html
#segment-routing-ipv6)
1011 - Improvements to
Prefix-SID
(Type
5)
1012 - EVPN route
type-5 gateway IP overlay Index
(http
://docs.frrouting.org
/en
/latest
/bgp.html
#evpn-overlay-index-gateway-ip)
1013 - OSPFv3 NSSA and NSSA totally stub areas
(http
://docs.frrouting.org
/en
/latest
/ospf6d.html
#ospf6-area)
1014 - OSPFv3 ASBR summarization
(http
://docs.frrouting.org
/en
/latest
/ospf6d.html
#asbr-summarisation-support-in-ospfv3)
1015 - OSPFv3 Graceful Restart
(http
://docs.frrouting.org
/en
/latest
/ospf6d.html
#graceful-restart)
1016 - OSPFv2 Graceful Restart
(restarting mode added
, helper was already implemented
) (http
://docs.frrouting.org
/en
/latest
/ospfd.html
#graceful-restart)
1018 - Every node
in running config now has an explicit "
exit" tag
1019 - Link bandwidth
in BGP is now correctly encoded according to IEEE
754. To stay with old incorrect encoding use
:
1020 - `neighbor PEER disable
-link
-bw
-encoding
-ieee`
1023 Fix path
for daemons file
install
1025 - Add "json" option to "show bgp as
-path
-access
-list"
1026 - Add `disable
-addpath
-rx` knob
1027 - Add an ability to
set extcommunity to none
in route
-maps
1028 - Add counter of displayed show bgp summary when filtering
1029 - Add knob to config cond
-adv scanner period
1030 - Add route
-map `match
alias`
command
1031 - Add rpki
source address configuration
1032 - Add show bgp summary filter by neighbor or as
1033 - Add terse display option on show bgp summary
1034 - Allow
for auto
-completion of community
alias's created
1035 - Bgp knob to teardown session immediately when peer is unreachable
1036 - Expand 'bgp default
<afi
>-<safi
>' cmds
1037 - Extend evpn next hop tracking to
type-1 and
type-4 routes
1038 - Fix "no router bgp x vrf default"
1039 - Flowspec redirect vrf uses vrf table instead of allocated table id
1040 - Handle quick flaps of an evpn prefix properly
1041 - Initial batch of evpn lttng tracepoints
1042 - Limit processing to what is needed
in rpki validation
1043 - Modify vrf
/view display
in show bgp summary
1044 - Set
4096 instead of
65535 as new max packet size
for a new peer
1045 - Set extended msg size only
if we advertised and received capability
1046 - Show bgp community
alias in json community list output
1047 - Show bgp prefixes by community
alias
1048 - Show max packet size per update
-group
1049 - Split soft reconfigure table task into several
jobs to not block vtysh
1050 - Store distance received from a redistribute statement
1051 - Update route
-type-1 legend to match output
1053 - Fix sending of lsp with null seqno
1055 - Add "json" option to "show ip
[v6
] access
-list"
1056 - Add "json" option to "show ip
[v6
] prefix
-list"
1057 - Add "json" option to "show route
-map"
1058 - Prevent grpc assert on missing yang node
1060 - Clear cache when shortcuts are cleared
1061 - Fix corrupt address being shown
for shortcuts with no cache entry
1062 - Set prefix correctly
in resolution request
1064 - Add debug commands
for lsa all and route all
1065 - Add warning log
for late hello packets
1066 - Add write
-multiplier configuration
1067 - Don't update router
-id
if at least one adjacency is full
1068 - Extend the "redistribute"
command with more options
1069 - Fix issue when displaying the redistribute
command
1070 - Fix logging of border router routes
1071 - Json output
for database dump show
command
1072 - Link state id
in lsa database json output
1073 - Send lsa update immediately when ospf instance is deleted
1075 - Fix crash when creating vlink
in unknown vrf
1076 - Gr conformance fix
for hello packet dr election
1077 - Print extra lsa information
in some log messages
1078 - Rfc conformance
test case 25.23 issue fix
1079 - Show ip ospf route json does not shown metric and tag
1080 - Summary lsa is not originated when process is reset
1082 - Handle pcinitiated configuration
, main thread
1083 - Handle pcinitiated messages
, thread controller
1084 - Handle srp_id correctly
1085 - If pce ret no
-path to pcreq don't retry pcreq nor delegate
1087 - Add `match ip
-protocol
[tcp|udp
]`
1088 - Add ability to
set/unset src and dest ports
1089 - Nhg "add" edge
case for last
in table range
1090 - Start inclusion of src and dst ports
for pbrd
1092 - Add tos
/ttl check
for igmp conformance
1093 - Allow join prune intervals to be as small as
5 seconds
1094 - Allow msdp group name 'default'
1095 - Fix register suppress timer code
1096 - Fix uaf
/heap corruption
in bsm code
1097 - Fix
command "no ip msdp mesh
-group member"
1098 - Igmp groups are not getting timeout
1099 - Igmp memberships are not querier specific
1100 - Igmp sockets need to be iface
-bound too
1101 - Prevent uninited usage of nexthop
1102 - Support msdp global timers configuration
1104 - Add cli timestamp '
-t' flag
1105 - Add error code
if daemon is not running
1106 - Fix searching commands
in parent nodes
1108 - Add msdp timer configuration
1109 - Fix bgp multicast prefix
type
1110 - Mark a couple of prefix
-list
/access
-list leafs as mandatory
1111 - Move multicast prefix
type definition
1112 - Replace an empty pattern with a zero
-length restriction
1113 - Rework pim msdp mesh group
1114 - Simplify msdp peer handling
1116 - Add "json" option to "show interface"
1117 - Various improvment to dataplane interface
1118 - Add message counts
for `show zebra client`
1119 - Add nhg id to show ip route json
1120 - Add show
command for ra interface lists
1121 - Fix ipv4 routes with ipv6 link
local next hops
install in fpm
1122 - Handle bridge mac address update
in evpn contexts
1123 - Move individual lines to table
in `show zebra client`
command
1124 - Refresh vxlan evpn contexts
, when bridge interface goes up
1125 - Update zl3vni when bridge link refreshed
in other namespaces
1127 * Wed Jul
21 2021 Martin Winter
<mwinter@opensourcerouting.org
> - 8.0
1129 - New daemon pathd
for segment routing
1130 - EVPN Multihoming is now fully supported
1131 - OSPFv3 now supports VRFs
1132 - TI
-LFA has been implemented
in IS
-IS and OSPF
1133 - Ability
for Zebra to dump netlink messages
in a human
-friendly format
1134 - LDP gained SNMP support
1135 - libyang minimun version is now
2.0
1137 - Add `distribute
-list` commands
1138 - Fix memory leak
in connected route handling
1140 - Add support
for use of aliases with communities
1141 - Add support of tcp
-mss
for neighbors
1142 - Add support
for EVPN Multihoming
1143 - Add ability to show BGP routes from a particular table version
1144 - Add support
for for RFC
8050 (MRT add
-path
)
1145 - Add SNMP support
for MPLS VPN
1146 - Add `show bgp summary wide`
command to show more detailed output
1148 - Add ability
for peer
-groups to have `ttl
-security hops` configured
1149 - Add support
for conditional Advertisement
1150 - Add support
for RFC
4271 Delay Open Timer
1151 - Add a knob to not advertise
until route is installed
in fib
1152 - Add BGP
-wide configuration
for graceful shutdown
1153 - Add support
for RFC
8654 extended messages
1154 - Improve RPKI reporting as well as new show commands
1155 - Improve handling of VRF route leaking
1156 - Improve scaling behavior
for dynamic neighbors
1157 - Improve LL nexthop tracking to be interface based
1158 - Improve route reachability handling with respect to blackhole routes
1159 - Improve SNMP traps to RFC
4273 notifications
1160 - Improve EVPN routes to use L3 NHG's where applicable
1161 - Improvements to EVPN
1162 - Improvements to update behavior
1163 - Fix various issues with connection resolution
1164 - Fix statistics commands
in some situations
1165 - Fix non
-determistic locally
-originated paths
in bestpath selection
1166 - Continue working on transitioning to YANG
/Northbound configuration
1167 - Various bug fixes and performance improvements
1169 - Add `distribute
-list` commands
1170 - Ensure received AS number is the same as ours
in all situations
1171 - Properly validate TLV lengths
in some situations
1173 - Add ldb
-sync functionality
1174 - Add TI
-LFA functionality
1175 - Add support
for Anycast
-SID's
1176 - Add support
for classic LFA RFC
5286
1177 - Add `show isis fast
-reroute summary`
command
1178 - Add support
for Remote LFA RFC
7490
1179 - Fix Attach
-bit processing
in some scenarios
1180 - Cleanup BFD integration
1181 - Various bug fixes and performance improvements
1184 - Support
for LDP IGP Synchronization
1185 - Support
for RLFA clients
1186 - Various bug fixes and performance improvements
1188 - Various bugfixes and performance improvements
1190 - Add `nhrp multicast
-nflog
-group
(1-65535)`
command
1191 - Add configuration options
for vici socket path
1192 - Add support
for forwarding multicast packets
1193 - Fix handling of MTU
1194 - Fix handling of NAT extension
1195 - Retry IPsec under some conditions
1197 - Add OSPF GR helper support
1198 - Add JSON support
for various commands
1199 - Add `summary
-address A.B.C.D
/M ...` commands
1200 - Add `area X nssa suppress
-fa`
command
1201 - Add support
for TI
-LFA
1202 - Add support
for BFD profiles
1203 - Add support
for Traffic Engineering database
1204 - Add support
for usage of DMPVPN with OSPF
1205 - Add `clear ip ospf neighbor` commands
1206 - Add YANG support
for route
-maps
1207 - Improvements to SNMP
1208 - Fixes
for type 5 and
type 7 LSA handling
1209 - Various bug fixes and performance improvements
1211 - Add support
for VRFs
1212 - Add JSON support to a bunch of commands
1213 - Add ability to control maximum paths
for routes
1214 - Add `show ipv6 ospf6 vrfs`
command
1215 - Add support
for BFD profiles
1216 - Fix to not send hellos on loopbacks
1217 - Cleanup area handling around interfaces
1218 - YANG support
for route
-maps
1219 - Various bug fixes and performance improvements
1221 - Cleanup trust of user input
1223 - Add support of SR
-TE policy management daemon
1224 - Add optional support
for PCEP to pathd
1225 - Integrate PCEP
-LIB into FRR
1227 - Add `
set installable` nhg
command
1228 - Improve interface up
/down event handling
1230 - Add YANG integration
1231 - Add JSON support to various commands
1232 - Add BFD profile support
1233 - Fixes to IGMP conformance
1234 - Fixes to behavior surrounding Prune and Prune
-pending
1235 - Various bug fixes and performance improvements
1237 - Fix interface wakeup after shutdown
1239 - Add ability to use Nexthop Groups
1240 - Add v4 redistribute watching
1244 - Fix nexthop handling
in some situations
1245 - Forbid blackhole and non
-blackhole nexthops
in a single route
1247 - printf formatting cleanups
1249 - Add a `show
history`
command
1250 - Add `show memory
<daemon
>` support
1251 - Start deprecation cycle
for `address
-family evpn`
1252 - Display version with
--help
1257 - Add JSON support to various commands
1258 - Add Human readable netlink dumps
1259 - Add L2 NHG support
1260 - Add support
for LSPs to FPM dataplane
1261 - Add ability
for other protocol daemons to
install nexthop groups into the kernel
1262 - Add YANG support
for route
-maps
1263 - Improve scale performance when handling a large number of VRF's
1264 - Improve network namespace handling
1265 - Improve asic
-offload handling
1266 - Improve FreeBSD interface and route handling
1267 - Improve handling of neighbors
in kernel dataplane plugin
1268 - Improve label manager
1269 - Improve route
-map processing
1270 - Improve debug
-ability of routes and VRFs
1271 - Improve FPM dataplane plugin
1272 - Improve handling of reachability
/ nexthop tracking on shutdown interfaces
1273 - Improve EVPN support
1274 - Fix startup handling of `
set src X`
1275 - Various bug fixes and performance improvements
1277 * Wed Mar
3 2021 Martin Winter
<mwinter@opensourcerouting.org
> - 7.5.1
1279 - Fix connected route leak on change
1281 - Session lookup was sometimes wrong
1282 - Memory leak and handling cleanups
1283 - In some situations handle vrf appropriately when receiving packets
1285 - Peer
Group Inheritance Fixes
1286 - Dissallow attempt to peer peers reachable via blackholes
1287 - Send BMP down message when reachability fails
1288 - Cleanup handling of aggregator data when the AGG AS is
0
1289 - Handle `neighbor
<peer
-group allowas
-in` config changes properly
1290 - Properly parse community and lcommunity values
in some circumstances
1291 - Allow peer
-groups to configure `ttl
-security hops`
1292 - Prevent v6 routes with v4 nexthops from being installed
1293 - Allow `default
-originate` to be cleared from a peer group
1294 - Fix evpn route
-map vni filter at origin
1295 - local routes were using non
-default distance
1296 - Properly track
if the nexthop was updated
in some circumstances
1297 - Cleanup `show running` when running bgp with `
-e X` values
1298 - Various Memory leaks
in show commands
1299 - Properly withdraw exported routes when deleting a VRF
1300 - Avoid resetting ebgp
-multihop
if peer setting is the same as peer
-group
1301 - Properly encode flowspec rules to zebra
in some rare circumstances
1302 - Generate statistics
for routes
in bgp when we have exactly
1 route
1303 - Properly apply route
-map
for the default
-originate
command
1305 - Properly
set MTU
for eigrp packets sent
1306 - Various memory leaks and using uninited data fixes
1308 - When last area address is removed
, resign
if we were the DR
1309 - Various memory leaks and using uninited data fixes
1311 - Various memory leaks and using uninited data fixes
1313 - Use onlink routes when prefix
== nh
1314 - Shortcut routes are installed with proper nexthop
1316 - Prevent duplicate packet
read in multiple vrf situation
1317 - Fix area removal at interface level
1318 - Restore Point to MultiPoint interface types
1319 - Correctly handle MTU change on startup
1320 - Multi Instance initialization sometimes was not successful
1321 - NSSA translate
-always was not working properly
1323 - Don't send hellos on loopback interfaces
1324 - Handle ECMP better when a sub
-path is removed
1325 - Memory leak and handling fixes
1326 - Fix Link LSA not updating when router priority is modified
1327 - Some output from show commands was wrong
1328 - Intra area remote connected prefixes sometimes not installed
1330 - Various memory leaks and using uninited data fixes
1332 - SGRpt prune received during prune didn't override holdtime
1333 - Various memory leaks and using uninited data fixes
1335 - Fix VRF and usage on startup
in some instances
1336 - Tableid was being mishandled
in some cases
1338 - Disable bracketed paste
in readline.
1340 - Various memory leaks and using uninited data fixes
1342 - Always
install blackhole routes using kernel routes instead of nexthops
1343 - Various memory leaks and using uninited data fixes
1344 - Dissallow resolution to duplicate nexthops that created infinite nexthops
1345 - Apply the route
-map delay
-timer globally
1346 - Some routes were stuck
in Queued state when using the FPM
1347 - Better handle vrf creation when using namespaces
1348 - Set NUD_NOARP on sticky mac entries
in addtion to NTF_STICKY
1349 - Allow `
set src X` to work on startup
1351 - Fix a variety of memory leaks
1352 - Fix VRF Creation
in some instances
1353 - RPKI context editing was not properly handled
in reload situations
1354 - routemap code was not properly handling modification of CLI
in some instances
1356 - Update to using rtrlib
0.7.0
1357 - Fix passthrough path
for Libyang
1.x
1359 - Remove old docker deps
1361 * Mon Nov
2 2020 Donald Sharp
<sharpd@nvidia.com
> - 7.5
1364 - Minimum ttl support
1368 - Add wide option to display of routes
1369 - Add `maximum
-prefix
<num
> force`
1370 - Add `bestpath
-routes` to neighbor
command
1371 - Add `bgp shutdown message MSG...`
command
1372 - Add v6 Flowspec support
1373 - Add `neighbor
<neigh
> shutdown rtt`
command
1374 - Allow update
-delay to be applied globaly
1376 - Beginning of MultiHoming Support
1378 - Segment Routing Support
1380 - Guard against adj timer display overflow
1381 - Add support
for Anycast
-SIDs
1382 - Add support
for Topology Independent LFA
(TI
-LFA
)
1383 - Add `lsp
-gen
-interval
2` to isis configuration
1385 - Segment Routing support
for ECMP
1387 - Prevent crash
if transferring config amongst instances
1389 - Adding json support to commands
1390 - DSCP
/ECN based PBR Matching
1392 - Add more json support to commands
1393 - Fix missing mesh
-group commands
1394 - MSDP SA forwarding
1395 - Clear
(s
,g
,rpt
) ifchannel on
(*, G
) prune received
1396 - Fix igmp querier election and IP address mapping
1397 - Crash fix when RP is removed
1399 - Northbound Support
1401 - Filter and route
-map Support
1402 - OSPF model definition
1403 - BGP model definition
1405 - Speed up output across daemons
1406 - Fix build
-time errors
for some
--enable flags
1407 - Speed up output of configuration across daemons
1409 - nexthop group support
for FPM
1410 - northbound support
for rib model
1411 - Backup nexthop support
1412 - netlink batching support
1413 - Allow upper level protocols to request ARP
1414 - Add json output
for zebra ES
, ES
-EVI and access vlan dumps
1416 - Upgrade to using libyang1.0
.184
1419 - Moved RPKI to subpackage
1420 - Added SNMP subpackage
1422 - As always there are too many bugfixes to list individually. This release
1423 - compromises just over
1k of commits by the community
, with contributors from
1426 * Tue Jun
30 2020 Martin Winter
<mwinter@opensourcerouting.org
> - 7.4
1428 - Use sequence numbers
for community lists
1429 - Fixes to nexthop groups
1430 - Add feature to limit outgoing number of routes
1431 - Per Neighbor Graceful Restart
1432 - Multiple Graceful Restart fixes
1433 - Support sub
-Type
-4 and sub
-Type
-5 for the VPNv4 SRv6 backend
1434 - rfc7606 support
: treat certain malformed routes as withdraw
1435 - allow origin override
for route aggregates
1436 - rfc6608 support
: Subcodes
for BGP Finite State Machine Error
1437 - rfc7607 support
: Codification of AS
0 Processing
1438 - rfc6286 support
: Autonomous
-System
-Wide Unique BGP Identifier
for BGP
-4
1439 - Unequal cost multipath
(a.ka. weighted ECMP
) with BGP link
-bandwidth
1440 - Enable rfc8212 by default except datacenter profile
1444 - Add copy
command to copy config from file into running config
1446 - adding support
for LDP ordered label distribution control
1448 - IS
-IS Segment Routing support
1450 - add initial support to add
/remove lsps
1452 - fix broadcast address
in IPv4 networks with
/31 mask
1453 - Add Graceful Restart support
for Protocol Daemon restarts
1455 - migrate route
-maps to use northbound interface
1456 - plus countless bug fixes and other improvements
1458 * Mon Jun
15 2020 Sascha Kattelmann
<sascha@netdef.org
>
1461 * Wed May
06 2020 David Lamparter
<equinox@opensourcerouting.org
> - 7.3.1
1464 * Fri Feb
14 2020 Martin Winter
<mwinter@opensourcerouting.org
> - 7.3
1467 - Route Aggregation code speed ups
1468 - BGP Vector I
/O speed ups
1469 - New CLI
: `
set distance XXX`
1470 - New CLI
: `aggregate
-address A.B.C.D
/M route
-map WORD`
1471 - New CLI
: `bgp reject
-as
-sets`
1472 - New CLI
: `advertise pip ...`
1473 - New CLI
: `match evpn rd ASN
:NN_OR_IP
-ADDRESS
:NN`
1474 - New CLI
: `show bgp l2vpn evpn community|large
-community X`
1475 - New CLI
: `show bgp l2vpn evpn A.B.C.D`
1476 - Auto
-completion
for clear bgp
command
1477 - Add ability to
set tcp socket buffer size
1479 - Partial MPLS TE support
1481 - New CLI
: `
set vrf unchanged|NAME`
1484 - New CLI
: 'show bfd peers brief'
1485 - New CLI
: 'clear bfd peer ...'
1487 - Significant Speedups
in accessing Internal Data
for higher scale
1488 - Support
for joining any
-source Multicast
1489 - Updated CLI
: 'show ip pim upstream
-join
-desired'
1490 - New CLI
: 'show ip pim channel'
1492 - MLAG experimental support
1495 - Northbound Conversion
- NHRPd
1498 - New CLI
: `banner motd line LINE...`
1500 - New CLI
: `show yang operational
-data XPATH`
1501 - New CLI
: `debug northbound`
1503 - Nexthop
Group support
1504 - New CLI
: 'debug zebra nexthop
[detail
]'
1505 - New CLI
: 'show router
-id'
1506 - MLAG experimental support
1508 - Additional status messages of system state to systemd
1509 - New CLI
: `watchfrr ignore DAEMON`
1511 - As always all daemons have received too many bug fixes to fully list
1512 - There has been a significant focus on increasing
test coverage
1513 - Change
in Behavior
:
1515 - All areas created default automatically to level
-1-2
1517 - Nexthop
Group Installation
in Kernel is turned on by default
1518 if the kernel supports
- New CLI
: 'show nexthop
-group rib
[singleton
]'
1520 - Renamed to frr
-* to remove collision with other packages
1522 * Fri Jan
17 2020 Martin Winter
<mwinter@opensourcerouting.org
> - 7.2.1
1525 - Do not apply eBGP policy
for iBGP peers
1526 - Show `ip` and `fqdn`
in json output
for `show
[ip
] bgp
<route
> json`
1527 - Fix large route
-distinguisher's format
1528 - Fix `no bgp listen range ...` configuration
command
1529 - Autocomplete neighbor
for clear bgp
1530 - Reflect the distance
in RIB when it is changed
for an arbitrary afi
/safi
1531 - Notify "Peer De
-configured" after entering 'no neighbor
<neighbor
> cmd
1532 - Fix per afi
/safi addpath peer counting
1533 - Rework BGP dampening to be per AFI
/SAFI
1534 - Do not send next
-hop as
:: in MP_REACH_NLRI
if no link
-local exists
1535 - Override peer's TTL only
if peer
-group is configured with TTL
1536 - Remove error message
for unkown afi
/safi combination
1537 - Keep the session down
if maximum
-prefix is reached
1539 - Fix BFD down not tearing down OSPF adjacency
for point
-to
-point net
1541 - Fix multiple VRF handling
1542 - VRF security improvement
1546 - Make sure `no ip nhrp map
<something
>` works as expected
1548 - Add missing sanity check
in the parsing of label messages
1550 - Use correct state when installing evpn macs
1551 - Capture dplane plugin flags
1553 - Fix interface config when vrf changes
1554 - Fix Interface Infinite Loop Walk
(for special interfaces such as bond
)
1556 - fix missing vrrpd daemon
1558 - Rename man pages
(to avoid conflicts with other packages
)
1559 - Various other fixes
for code cleanup and memory leaks
1561 * Fri Dec
27 2019 Donatas Abraitis
<donatas.abraitis@gmail.com
>
1562 - Add CentOS
8 support
1564 * Tue Oct
15 2019 Martin Winter
<mwinter@opensourcerouting.org
> - 7.2
1566 - -N
<namespace
> to allow
for config file locating when running FRR inside
1568 - Impoved Testing across all daemons
1571 - Conversion to Northbound interface
1573 - Aggregate
-address add route
-map support
1575 - Improved JSON output
for many commands
1576 - `show bgp afi safi summary failed`
command
1577 - `clear bop
*` clears all peers
1578 - Show FQDN
for `show bgp ipv4 uni` commands
1579 - Display BestPath selection reason as part of show commands
1581 - Infrastructure changes to allow VRF's
1582 - SIGHUP signals the config reload
1583 - Conversion to Northbound interface
1586 - Support
for circuits with MTU
> 8192
1588 - fwmark support as part of match criteria
1589 - autocompletion of PBRMAPS
1590 - Improved Nexthop Support
1592 - PIM
-BSM receive support
1593 - Improved debugging support
1594 - Store ECMP paths that are not currently legal
for use
1595 - Disallow igmp query from a non
-connected
source
1596 - Many new cli improvements and changes
1598 - Add Support
for RFC
3768 and RFC
5798
1600 - Add sequence numbers to access
-lists
1601 - Add `match ip next
-hop
type blackhole`
1602 - Improved ability to notice dependency changes
1604 - `sharp watch
[import|nexthop
]` you can now specify a prefix instead
1607 - Significantly Improved NHT
1609 - Many dataplane improvements
for routes
, neighbor table and EVPN
1610 - NHT cli can now be specified per VRF and improved ability to control
1611 NHT data being shown
1612 - Removed duplicate processing of routes
1613 - Improved debugablility
1614 - RMAC and VxLan support
for the FPM
1617 - Nexthop
Group Improvements
1618 - `log
-filter WORD` added
1621 - libcap should be used as part of build or significant slowdowns
1623 - Lua builds have been fixed
1624 - Improved Cross building
1626 * Mon Jun
17 2019 David Lamparter
<equinox@opensourcerouting.org
> - 7.1
1627 - gRPC northbound plugin
1628 - "table NNN" removed from zebra
1629 - more dataplane MT work
1630 - EVPN
in non
-default VRFs
1631 - RFC
8212 (default deny policy
for eBGP
)
1632 - RFC
8106 (IPv6 RA DNS options
)
1634 * Wed May
8 2019 Martin Winter
<mwinter@opensourcerouting.org
> - 7.0.1
1636 - Don't send Updates with BGP Max
-Prefix Overflow
1637 - Make sure `next
-hop
-self all` backward compatible with force
1638 - Fix as
-path validation
in "show bgp regexp"
1639 - Fix interface
-based peers to override peergroups
1640 - Fix removing private AS numbers
if local-as is used
1641 - Fix show bgp labeled_unicast
1642 - Add
command to lookup prefixes
in rpki table
1643 - Fix peer count
in "show bgp ipv6 summary"
1644 - Add missing ipv6 only peer flag action
1645 - Fix address family output
in "show bgp
[ipv4|ipv6
] neighbors"
1646 - Add missing checks
for vpnv6 nexthops
1647 - Fix nexthop
for ipv6 vpn
case
1648 - rip
: Fix removal of passive interfaces
1650 - Fix json timer output
1651 - Fix milliseconds
in json output
1653 - Fix
source port according RFC
5881, Sec
4
1654 - Fix IPv6 link
-local peer removal
1655 - Fix interface clean up when deleting interface
1656 - pim
: Fix interface clean up when deleting interface
1657 - nhrp
: Fix interface clean up when deleting interface
1659 - Workaround to get FRR building with libyang
0.x and
1.x
1660 - Fix
in priv handling
1661 - Make priv elevation thread
-safe
1663 - Pseudowire event recovery
1664 - Fix race condition
in label manager
1665 - Fix system routes selection and next
-hop tracking
1666 - Set connected route metric based on devaddr metric
1667 - Display metric
for connected routes
1668 - Add selected fib details to json output
1669 - Always use replace
if installing new route
1670 - watchfrr
: Silently ignore
declare failures
(for backward compatibility
)
1671 - RPM packages
: Switch to new init script
1673 * Thu Feb
28 2019 Martin Winter
<mwinter@opensourcerouting.org
> - 7.0
1674 - Added libyang dependency
: New work
for northbound interface based on libyang
1675 - Fabricd
: New Daemon based on https
://datatracker.ietf.org
/doc
/draft
-white
-openfabric
/
1676 - various bug fixes and other enhancements
1678 * Sun Oct
7 2018 Martin Winter
<mwinter@opensourcerouting.org
> - 6.0
1679 - Staticd
: New daemon responsible
for management of static routes
1680 - ISISd
: Implement dst
-src routing as per draft
-ietf
-isis
-ipv6
-dst
-src
-routing
1681 - BFDd
: new daemon
for BFD
(Bidrectional Forwarding Detection
). Responsible
1682 for notifying link changes to
make routing protocols converge faster.
1685 * Thu Jul
5 2018 Martin Winter
<mwinter@opensourcerouting.org
> - 5.0.1
1686 - Support Automake
1.16.1
1687 - BGPd
: Support
for flowspec ICMP
, DSCP
, packet length
, fragment and tcp flags
1688 - BGPd
: fix rpki validation
for ipv6
1689 - VRF
: Workaround
for kernel bug on Linux
4.14 and newer
1690 - Zebra
: Fix interface based routes from zebra not marked up
1691 - Zebra
: Fix large zebra memory usage when redistribute between protocols
1692 - Zebra
: Allow route
-maps to match on
source instance
1693 - BGPd
: Backport peer
-attr overrides
, peer
-level enforce
-first
-as and filtered
-routes fix
1694 - BGPd
: fix
for crash during display of filtered
-routes
1695 - BGPd
: Actually display labeled unicast routes received
1696 - Label Manager
: Fix to work correctly behind a label manager proxy
1698 * Thu Jun
7 2018 Martin Winter
<mwinter@opensourcerouting.org
> - 5.0
1699 - PIM
: Add a Multicast Trace Command draft
-ietf
-idmr
-traceroute
-ipm
-05
1700 - IS
-IS
: Implement Three
-Way Handshake as per RFC5303
1701 - BGPD
: Implement VPN
-VRF route leaking per RFC4364.
1702 - BGPD
: Implement VRF with NETNS backend
1704 - PBRD
: Add a new Policy Based Routing Daemon
1706 * Mon May
28 2018 Rafael Zalamena
<rzalamena@opensourcerouting.org
>
1709 * Sun May
20 2018 Martin Winter
<mwinter@opensourcerouting.org
>
1710 - Fixed RPKI RPM build
1712 * Sun Mar
4 2018 Martin Winter
<mwinter@opensourcerouting.org
>
1713 - Add option to build with RPKI
(default
: disabled
)
1715 * Tue Feb
20 2018 Martin Winter
<mwinter@opensourcerouting.org
>
1716 - Adapt to new documentation structure based on Sphinx
1718 * Fri Oct
20 2017 Martin Winter
<mwinter@opensourcerouting.org
>
1719 - Fix script location
for watchfrr restart functions
in daemon config
1720 - Fix postun script to restart frr during upgrade
1722 * Mon Jun
5 2017 Martin Winter
<mwinter@opensourcerouting.org
>
1723 - added NHRP and EIGRP daemon
1725 * Mon Apr
17 2017 Martin Winter
<mwinter@opensourcerouting.org
>
1726 - new subpackage frr
-pythontools with python
2.7 restart script
1727 - remove PIMd from CentOS
/RedHat
6 RPM packages
(won't work
- too old
)
1728 - converted to single frr init script
(not per daemon
) based on debian init script
1729 - created systemd service file
for systemd based systems
(which uses init script
)
1730 - Various other RPM package fixes
for FRR
2.0
1732 * Fri Jan
6 2017 Martin Winter
<mwinter@opensourcerouting.org
>
1733 - Renamed to frr
for FRRouting fork of Quagga
1735 * Thu Feb
11 2016 Paul Jakma
<paul@jakma.org
>
1736 - remove with_ipv6 conditionals
, always build v6
1737 - Fix UTF
-8 char
in spec changelog
1738 - remove quagga.pam.stack
, long deprecated.
1740 * Thu Oct
22 2015 Martin Winter
<mwinter@opensourcerouting.org
>
1741 - Cleanup configure
: remove
--enable-ipv6
(default now
), --enable-nssa
,
1743 - Remove support
for old fedora
4/5
1744 - Fix
for package nameing
1745 - Fix Weekdays of previous changelogs
(bogus dates
)
1746 - Add conditional logic to only build tex footnotes with supported texi2html
1747 - Added pimd to files section and fix double listing of
/var
/lib
*/quagga
1748 - Numerous fixes to unify upstart
/systemd startup into same spec file
1749 - Only allow use of watchfrr
for non
-systemd systems. no need with systemd
1751 * Fri Sep
4 2015 Paul Jakma
<paul@jakma.org
>
1753 - add a default define
for with_pimd
1755 * Mon Sep
12 2005 Paul Jakma
<paul@dishone.st
>
1756 - Steal some changes from Fedora spec file
:
1757 - Add with_rtadv variable
1758 - Test
for groups
/users with getent before group
/user adding
1759 - Readline need not be an explicit prerequisite
1760 - install-info delete should be postun
, not preun
1762 * Wed Jan
12 2005 Andrew J. Schorr
<ajschorr@alumni.princeton.edu
>
1763 - on package upgrade
, implement careful
, phased restart logic
1764 - use gcc
-rdynamic flag when linking
for better backtraces
1766 * Wed Dec
22 2004 Andrew J. Schorr
<ajschorr@alumni.princeton.edu
>
1767 - daemonv6_list should contain only IPv6 daemons
1769 * Wed Dec
22 2004 Andrew J. Schorr
<ajschorr@alumni.princeton.edu
>
1771 - on upgrade
, all daemons should be condrestart'ed
1772 - on removal
, all daemons should be stopped
1774 * Mon Nov
08 2004 Paul Jakma
<paul@dishone.st
>
1775 - Use makeinfo
--html to generate quagga.html
1777 * Sun Nov
07 2004 Paul Jakma
<paul@dishone.st
>
1778 - Fix with_ipv6
set to
0 build
1780 * Sat Oct
23 2004 Paul Jakma
<paul@dishone.st
>
1783 * Sat Oct
23 2004 Andrew J. Schorr
<aschorr@telemetry
-investments.com
>
1784 - Make directories be owned by the packages concerned
1785 - Update logrotate scripts to use correct path to killall and use pid files
1787 * Fri Oct
08 2004 Paul Jakma
<paul@dishone.st
>
1790 * Wed Sep
15 2004 Paul Jakma
<paul@dishone.st
>
1791 - build snmp support by default
1792 - build irdp support
1793 - build with shared libs
1794 - devel subpackage
for archives and headers
1796 * Thu Jan
08 2004 Paul Jakma
<paul@dishone.st
>
1797 - updated sysconfig files to specify
local dir
1798 - added ospf_dump.c crash quick fix patch
1799 - added ospfd persistent interface configuration patch
1801 * Tue Dec
30 2003 Paul Jakma
<paul@dishone.st
>
1803 - integrate RH sysconfig patch to specify daemon options
(RH
)
1804 - default to have vty listen only to
127.1 (RH
)
1805 - add user with fixed UID
/GID
(RH
)
1806 - create user with shell
/sbin
/nologin rather than
/bin
/false
(RH
)
1807 - stop daemons on uninstall
(RH
)
1808 - delete info file on preun
, not postun to avoid deletion on upgrade.
(RH
)
1810 - cleanup tasks carried out
for every daemon
1812 * Sun Nov
2 2003 Paul Jakma
<paul@dishone.st
>
1813 - Fix
-devel package to include all files
1816 * Tue Aug
12 2003 Paul Jakma
<paul@dishone.st
>
1818 - Sync to Quagga release
0.96
1820 * Thu Mar
20 2003 Paul Jakma
<paul@dishone.st
>
1821 - zebra privileges support
1823 * Tue Mar
18 2003 Paul Jakma
<paul@dishone.st
>
1824 - Fix mem leak
in 'show thread cpu'
1825 - Ralph Keller's OSPF
-API
1826 - Amir
: Fix configure.ac
for net
-snmp
1828 * Sat Mar
1 2003 Paul Jakma
<paul@dishone.st
>
1829 - ospfd IOS prefix to interface matching
for 'network' statement
1830 - temporary fix
for PtP and IPv6
1831 - sync to zebra.org CVS
1833 * Mon Jan
20 2003 Paul Jakma
<paul@dishone.st
>
1834 - update to latest cvs
1835 - Yon's "show thread cpu" patch
- 17217
1836 - walk up tree
- 17218
1837 - ospfd NSSA fixes
- 16681
1838 - ospfd nsm fixes
- 16824
1839 - ospfd OLSA fixes and new feature
- 16823
1840 - KAME and ifindex fixes
- 16525
1841 - spec file changes to allow redhat files to be
in tree
1843 * Sat Dec
28 2002 Alexander Hoogerhuis
<alexh@ihatent.com
>
1844 - Added conditionals
for building with
(out
) IPv6
, vtysh
, RIP
, BGP
1845 - Fixed up some build requirements
(patch
)
1846 - Added conditional build requirements
for vtysh
/ snmp
1847 - Added conditional to files
for _bindir depending on vtysh
1849 * Mon Nov
11 2002 Paul Jakma
<paulj@alphyra.ie
>
1850 - update to latest CVS
1851 - add Greg Troxel's md5 buffer copy
/dup fix
1853 - add Frank's multicast flag fix
1855 * Wed Oct
09 2002 Paul Jakma
<paulj@alphyra.ie
>
1856 - update to latest CVS
1857 - timestamped crypt_seqnum patch
1858 - oi
->on_write_q fix
1860 * Mon Sep
30 2002 Paul Jakma
<paulj@alphyra.ie
>
1861 - update to latest CVS
1862 - add vtysh 'write
-config
(integrated|daemon
)' patch
1863 - always '
make rebuild'
in vtysh
/ to catch new commands
1865 * Fri Sep
13 2002 Paul Jakma
<paulj@alphyra.ie
>
1868 * Wed Sep
11 2002 Paul Jakma
<paulj@alphyra.ie
>
1869 - update to latest CVS
1870 - add "
/sbin
/ip route flush proto zebra" to zebra RH init on startup
1872 * Sat Aug
24 2002 Paul Jakma
<paulj@alphyra.ie
>
1873 - update to current CVS
1874 - add OSPF point to multipoint patch
1876 - add BGP
hash optimisation patch
1878 * Fri Jun
14 2002 Paul Jakma
<paulj@alphyra.ie
>
1879 - update to
0.93-pre1
/ CVS
1880 - add link state detection support
1881 - add generic PtP and RFC3021 support
1884 * Thu Aug
09 2001 Elliot Lee
<sopwith@redhat.com
> 0.91a
-6
1887 * Wed Aug
1 2001 Trond Eivind Glomsrød
<teg@redhat.com
> 0.91a
-5
1888 - Use generic initscript strings instead of initscript specific
1889 ( "Starting foo
: "
-> "Starting $prog
:"
)
1891 * Fri Jul
27 2001 Elliot Lee
<sopwith@redhat.com
> 0.91a
-4
1892 - Bump the release when rebuilding into the dist.
1894 * Tue Feb
6 2001 Tim Powers
<timp@redhat.com
>
1895 - built
for Powertools
1897 * Sun Feb
4 2001 Pekka Savola
<pekkas@netcore.
fi>
1898 - Hacked up from PLD Linux
0.90-1, Mandrake
0.90-1mdk and one from zebra.org.
1900 - Very heavy modifications to init.d
/*, .spec
, pam
, i18n
, logrotate
, etc.
1901 - Should be quite Red Hat'isque now.