]> git.proxmox.com Git - mirror_ovs.git/blob - rhel/etc_sysconfig_network-scripts_ifup-ovs
treewide: Convert leading tabs to spaces.
[mirror_ovs.git] / rhel / etc_sysconfig_network-scripts_ifup-ovs
1 #!/bin/bash
2
3 # Copyright (c) 2011 Alexey I. Froloff.
4 #
5 # Licensed under the Apache License, Version 2.0 (the "License");
6 # you may not use this file except in compliance with the License.
7 # You may obtain a copy of the License at:
8 #
9 # http://www.apache.org/licenses/LICENSE-2.0
10 #
11 # Unless required by applicable law or agreed to in writing, software
12 # distributed under the License is distributed on an "AS IS" BASIS,
13 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
14 # See the License for the specific language governing permissions and
15 # limitations under the License.
16
17 . /etc/init.d/functions
18
19 cd /etc/sysconfig/network-scripts
20 . ./network-functions
21
22 [ -f ../network ] && . ../network
23
24 CONFIG=${1}
25 TIMEOUT=10
26
27 need_config ${CONFIG}
28
29 source_config
30
31 OTHERSCRIPT="/etc/sysconfig/network-scripts/ifup-${REAL_DEVICETYPE}"
32
33 if [ ! -x ${OTHERSCRIPT} ]; then
34 OTHERSCRIPT="/etc/sysconfig/network-scripts/ifup-eth"
35 fi
36
37 check_recursion ()
38 {
39 [ -n "${UPPEDSTACK}" ] && for _r in ${UPPEDSTACK}; do
40 [ "$_r" = "$1" ] && return 1
41 done
42
43 return 0
44 }
45
46 ifup_ovs_bridge ()
47 {
48 if ovs-vsctl br-exists "${OVS_BRIDGE}"; then :; else
49 /sbin/ifup "${OVS_BRIDGE}"
50 fi
51 }
52
53 if [ -z "${UPPEDSTACK}" ]; then
54 UPPEDSTACK="${DEVICE}"
55 fi
56
57 [ -n "${OVSREQUIRES}" ] && for _i in ${OVSREQUIRES}; do
58 if ( check_recursion "$_i" ); then
59 UPPEDSTACK="${UPPEDSTACK} $_i" /sbin/ifup "$_i"
60 fi
61 done
62
63 SERVICE_UNIT=/usr/lib/systemd/system/openvswitch.service
64 if [ -f $SERVICE_UNIT ] && [ -x /usr/bin/systemctl ]; then
65 if ! systemctl --quiet is-active openvswitch.service; then
66 systemctl start openvswitch.service
67 fi
68 else
69 if [ ! -f /var/lock/subsys/openvswitch ]; then
70 /sbin/service openvswitch start
71 fi
72 fi
73
74 case "$TYPE" in
75 OVSBridge|OVSUserBridge)
76 # If bridge already exists and is up, it has been configured through
77 # other cases like OVSPort, OVSIntPort and OVSBond. If it is down or
78 # it does not exist, create it. It is possible for a bridge to exist
79 # because it remained in the OVSDB for some reason, but it won't be up.
80 if [ "${TYPE}" = "OVSUserBridge" ]; then
81 DATAPATH="netdev"
82 fi
83 if check_device_down "${DEVICE}"; then
84 ovs-vsctl -t ${TIMEOUT} -- --may-exist add-br "$DEVICE" $OVS_OPTIONS \
85 ${OVS_EXTRA+-- $OVS_EXTRA} \
86 ${STP+-- set bridge "$DEVICE" stp_enable="${STP}"} \
87 ${DATAPATH+-- set bridge "$DEVICE" datapath_type="$DATAPATH"}
88 else
89 OVSBRIDGECONFIGURED="yes"
90 fi
91
92 # If MACADDR is provided in the interface configuration file,
93 # we need to set it using ovs-vsctl; setting it with the "ip"
94 # command in ifup-eth does not make the change persistent.
95 if [ -n "$MACADDR" ]; then
96 ovs-vsctl -t ${TIMEOUT} -- set bridge "$DEVICE" \
97 other-config:hwaddr="$MACADDR"
98 fi
99
100 # When dhcp is enabled, the assumption is that there will be a port to
101 # attach (otherwise, we can't reach out for dhcp). So, we do not
102 # configure the bridge through rhel's ifup infrastructure unless
103 # it is being configured after the port has been configured.
104 # The "OVSINTF" is set only after the port is configured.
105 if [ "${OVSBOOTPROTO}" = "dhcp" ] && [ -n "${OVSINTF}" ]; then
106 case " ${OVSDHCPINTERFACES} " in
107 *" ${OVSINTF} "*)
108 BOOTPROTO=dhcp ${OTHERSCRIPT} ${CONFIG}
109 ;;
110 esac
111 fi
112
113 # When dhcp is not enabled, it is possible that someone may want
114 # a standalone bridge (i.e it may not have any ports). Configure it.
115 if [ "${OVSBOOTPROTO}" != "dhcp" ] && [ -z "${OVSINTF}" ] && \
116 [ "${OVSBRIDGECONFIGURED}" != "yes" ]; then
117 ${OTHERSCRIPT} ${CONFIG}
118 fi
119 exit 0
120 ;;
121 OVSPort)
122 ifup_ovs_bridge
123 ${OTHERSCRIPT} ${CONFIG} ${2}
124 # The port might be already in the database but not yet
125 # in the datapath. So, remove the stale interface first.
126 ovs-vsctl -t ${TIMEOUT} \
127 -- --if-exists del-port "$OVS_BRIDGE" "$DEVICE" \
128 -- add-port "$OVS_BRIDGE" "$DEVICE" $OVS_OPTIONS ${OVS_EXTRA+-- $OVS_EXTRA}
129 OVSINTF=${DEVICE} /sbin/ifup "$OVS_BRIDGE"
130 ;;
131 OVSIntPort)
132 ifup_ovs_bridge
133 ovs-vsctl -t ${TIMEOUT} \
134 -- --if-exists del-port "$OVS_BRIDGE" "$DEVICE" \
135 -- add-port "$OVS_BRIDGE" "$DEVICE" $OVS_OPTIONS \
136 -- set Interface "$DEVICE" type=internal ${OVS_EXTRA+-- $OVS_EXTRA}
137 if [ -n "${OVSDHCPINTERFACES}" ]; then
138 for _iface in ${OVSDHCPINTERFACES}; do
139 /sbin/ifup ${_iface}
140 done
141 fi
142 BOOTPROTO="${OVSBOOTPROTO}" ${OTHERSCRIPT} ${CONFIG} ${2}
143 ;;
144 OVSBond)
145 ifup_ovs_bridge
146 for _iface in $BOND_IFACES; do
147 /sbin/ifup ${_iface}
148 done
149 ovs-vsctl -t ${TIMEOUT} \
150 -- --if-exists del-port "$OVS_BRIDGE" "$DEVICE" \
151 -- add-bond "$OVS_BRIDGE" "$DEVICE" ${BOND_IFACES} $OVS_OPTIONS ${OVS_EXTRA+-- $OVS_EXTRA}
152 OVSINTF=${DEVICE} /sbin/ifup "$OVS_BRIDGE"
153 ;;
154 OVSTunnel)
155 ifup_ovs_bridge
156 ovs-vsctl -t ${TIMEOUT} \
157 -- --if-exists del-port "$OVS_BRIDGE" "$DEVICE" \
158 -- add-port "$OVS_BRIDGE" "$DEVICE" $OVS_OPTIONS \
159 -- set Interface "$DEVICE" type=$OVS_TUNNEL_TYPE $OVS_TUNNEL_OPTIONS ${OVS_EXTRA+-- $OVS_EXTRA}
160 ;;
161 OVSPatchPort)
162 ifup_ovs_bridge
163 ovs-vsctl -t ${TIMEOUT} \
164 -- --if-exists del-port "$OVS_BRIDGE" "$DEVICE" \
165 -- add-port "$OVS_BRIDGE" "$DEVICE" $OVS_OPTIONS \
166 -- set Interface "$DEVICE" type=patch options:peer="${OVS_PATCH_PEER}" ${OVS_EXTRA+-- $OVS_EXTRA}
167 ;;
168 OVSDPDKPort)
169 ifup_ovs_bridge
170 BRIDGE_MAC_ORIG=$(get_hwaddr $OVS_BRIDGE)
171 ovs-vsctl -t ${TIMEOUT} \
172 -- --if-exists del-port "$OVS_BRIDGE" "$DEVICE" \
173 -- add-port "$OVS_BRIDGE" "$DEVICE" $OVS_OPTIONS \
174 -- set Interface "$DEVICE" type=dpdk ${OVS_EXTRA+-- $OVS_EXTRA}
175 BRIDGE_MAC=$(get_hwaddr $OVS_BRIDGE)
176 # The bridge may change its MAC to be the lower one among all its
177 # ports. If that happens, bridge configuration (e.g. routes) will
178 # be lost. Restore the post-up bridge configuration again.
179 if [ "$BRIDGE_MAC_ORIG" != "$BRIDGE_MAC" ]; then
180 ${OTHERSCRIPT} "$OVS_BRIDGE"
181 fi
182 ;;
183 OVSDPDKRPort)
184 ifup_ovs_bridge
185 ovs-vsctl -t ${TIMEOUT} \
186 -- --if-exists del-port "$OVS_BRIDGE" "$DEVICE" \
187 -- add-port "$OVS_BRIDGE" "$DEVICE" $OVS_OPTIONS \
188 -- set Interface "$DEVICE" type=dpdkr ${OVS_EXTRA+-- $OVS_EXTRA}
189 ;;
190 OVSDPDKVhostUserPort)
191 ifup_ovs_bridge
192 PORT_TYPE="dpdkvhostuser"
193 PORT_PATH=""
194 if [ "$OVS_PORT_MODE" == "client" ]; then
195 PORT_TYPE="dpdkvhostuserclient"
196 PORT_PATH="options:vhost-server-path=${OVS_PORT_PATH}"
197 fi
198 ovs-vsctl -t ${TIMEOUT} \
199 -- --if-exists del-port "$OVS_BRIDGE" "$DEVICE" \
200 -- add-port "$OVS_BRIDGE" "$DEVICE" $OVS_OPTIONS \
201 -- set Interface "$DEVICE" type=$PORT_TYPE \
202 $PORT_PATH \
203 ${OVS_EXTRA+-- $OVS_EXTRA}
204 ;;
205 OVSDPDKBond)
206 ifup_ovs_bridge
207 BRIDGE_MAC_ORIG=$(get_hwaddr $OVS_BRIDGE)
208 for _iface in $BOND_IFACES; do
209 IFACE_TYPES="${IFACE_TYPES} -- set interface ${_iface} type=dpdk"
210 done
211 ovs-vsctl -t ${TIMEOUT} \
212 -- --if-exists del-port "$OVS_BRIDGE" "$DEVICE" \
213 -- add-bond "$OVS_BRIDGE" "$DEVICE" ${BOND_IFACES} $OVS_OPTIONS ${IFACE_TYPES} ${OVS_EXTRA+-- $OVS_EXTRA}
214 BRIDGE_MAC=$(get_hwaddr $OVS_BRIDGE)
215 # The bridge may change its MAC to be the lower one among all its
216 # ports. If that happens, bridge configuration (e.g. routes) will
217 # be lost. Restore the post-up bridge configuration again.
218 if [ "$BRIDGE_MAC_ORIG" != "$BRIDGE_MAC" ]; then
219 ${OTHERSCRIPT} "$OVS_BRIDGE"
220 fi
221 ;;
222 *)
223 echo $"Invalid OVS interface type $TYPE"
224 exit 1
225 ;;
226 esac