scripts/package/Makefile

   1 # Makefile for the different targets used to generate full packages of a kernel
   2 # It uses the generic clean infrastructure of kbuild
   3
   4 # RPM target
   5 # ---------------------------------------------------------------------------
   6 # The rpm target generates two rpm files:
   7 # /usr/src/packages/SRPMS/kernel-2.6.7rc2-1.src.rpm
   8 # /usr/src/packages/RPMS/i386/kernel-2.6.7rc2-1.<arch>.rpm
   9 # The src.rpm files includes all source for the kernel being built
  10 # The <arch>.rpm includes kernel configuration, modules etc.
  11 #
  12 # Process to create the rpm files
  13 # a) clean the kernel
  14 # b) Generate .spec file
  15 # c) Build a tar ball, using symlink to make kernel version
  16 #    first entry in the path
  17 # d) and pack the result to a tar.gz file
  18 # e) generate the rpm files, based on kernel.spec
  19 # - Use /. to avoid tar packing just the symlink
  20
  21 # Note that the rpm-pkg target cannot be used with KBUILD_OUTPUT,
  22 # but the binrpm-pkg target can; for some reason O= gets ignored.
  23
  24 # Remove hyphens since they have special meaning in RPM filenames
  25 KERNELPATH := kernel-$(subst -,_,$(KERNELRELEASE))
  26 KDEB_SOURCENAME ?= linux-$(KERNELRELEASE)
  27 export KDEB_SOURCENAME
  28 # Include only those top-level files that are needed by make, plus the GPL copy
  29 TAR_CONTENT := $(KBUILD_ALLDIRS) .config .scmversion Makefile \
  30                Kbuild Kconfig COPYING $(wildcard localversion*)
  31 MKSPEC     := $(srctree)/scripts/package/mkspec
  32
  33 quiet_cmd_src_tar = TAR     $(2).tar.gz
  34       cmd_src_tar = \
  35 if test "$(objtree)" != "$(srctree)"; then \
  36         echo "Building source tarball is not possible outside the"; \
  37         echo "kernel source tree. Don't set KBUILD_OUTPUT, or use the"; \
  38         echo "binrpm-pkg or bindeb-pkg target instead."; \
  39         false; \
  40 fi ; \
  41 $(srctree)/scripts/setlocalversion --save-scmversion; \
  42 ln -sf $(srctree) $(2); \
  43 tar -cz $(RCS_TAR_IGNORE) -f $(2).tar.gz \
  44         $(addprefix $(2)/,$(TAR_CONTENT) $(3)); \
  45 rm -f $(2) $(objtree)/.scmversion
  46
  47 # rpm-pkg
  48 # ---------------------------------------------------------------------------
  49 rpm-pkg rpm: FORCE
  50         $(MAKE) clean
  51         $(CONFIG_SHELL) $(MKSPEC) >$(objtree)/kernel.spec
  52         $(call cmd,src_tar,$(KERNELPATH),kernel.spec)
  53         $(CONFIG_SHELL) $(srctree)/scripts/mkversion > $(objtree)/.tmp_version
  54         mv -f $(objtree)/.tmp_version $(objtree)/.version
  55         rpmbuild $(RPMOPTS) --target $(UTS_MACHINE) -ta $(KERNELPATH).tar.gz
  56         rm $(KERNELPATH).tar.gz kernel.spec
  57
  58 # binrpm-pkg
  59 # ---------------------------------------------------------------------------
  60 binrpm-pkg: FORCE
  61         $(MAKE) KBUILD_SRC=
  62         $(CONFIG_SHELL) $(MKSPEC) prebuilt > $(objtree)/binkernel.spec
  63         $(CONFIG_SHELL) $(srctree)/scripts/mkversion > $(objtree)/.tmp_version
  64         mv -f $(objtree)/.tmp_version $(objtree)/.version
  65
  66         rpmbuild $(RPMOPTS) --define "_builddir $(objtree)" --target \
  67                 $(UTS_MACHINE) -bb $(objtree)/binkernel.spec
  68         rm binkernel.spec
  69
  70 # Deb target
  71 # ---------------------------------------------------------------------------
  72 quiet_cmd_builddeb = BUILDDEB
  73       cmd_builddeb = set -e; \
  74         test `id -u` = 0 || \
  75         test -n "$(KBUILD_PKG_ROOTCMD)" || { \
  76                 which fakeroot >/dev/null 2>&1 && \
  77                 KBUILD_PKG_ROOTCMD="fakeroot -u"; \
  78         } || { \
  79                 echo; \
  80                 echo "builddeb must be run as root (or using fakeroot)."; \
  81                 echo "KBUILD_PKG_ROOTCMD is unset and fakeroot not found."; \
  82                 echo "Try setting KBUILD_PKG_ROOTCMD to a command to acquire"; \
  83                 echo "root privileges (e.g., 'fakeroot -u' or 'sudo')."; \
  84                 false; \
  85         } && \
  86         \
  87         $$KBUILD_PKG_ROOTCMD $(CONFIG_SHELL) \
  88                 $(srctree)/scripts/package/builddeb $@
  89
  90 deb-pkg: FORCE
  91         $(MAKE) clean
  92         $(call cmd,src_tar,$(KDEB_SOURCENAME))
  93         $(MAKE) KBUILD_SRC=
  94         +$(call cmd,builddeb)
  95
  96 bindeb-pkg: FORCE
  97         $(MAKE) KBUILD_SRC=
  98         +$(call cmd,builddeb)
  99
 100 clean-dirs += $(objtree)/debian/
 101
 102
 103 # tarball targets
 104 # ---------------------------------------------------------------------------
 105 tar%pkg: FORCE
 106         $(MAKE) KBUILD_SRC=
 107         $(CONFIG_SHELL) $(srctree)/scripts/package/buildtar $@
 108
 109 clean-dirs += $(objtree)/tar-install/
 110
 111
 112 # perf-pkg - generate a source tarball with perf source
 113 # ---------------------------------------------------------------------------
 114
 115 perf-tar=perf-$(KERNELVERSION)
 116
 117 quiet_cmd_perf_tar = TAR
 118       cmd_perf_tar = \
 119 git --git-dir=$(srctree)/.git archive --prefix=$(perf-tar)/         \
 120         HEAD^{tree} $$(cd $(srctree);                               \
 121                        echo $$(cat tools/perf/MANIFEST)) \
 122         -o $(perf-tar).tar;                                         \
 123 mkdir -p $(perf-tar);                                               \
 124 git --git-dir=$(srctree)/.git rev-parse HEAD > $(perf-tar)/HEAD;    \
 125 (cd $(srctree)/tools/perf;                                          \
 126 util/PERF-VERSION-GEN $(CURDIR)/$(perf-tar)/);              \
 127 tar rf $(perf-tar).tar $(perf-tar)/HEAD $(perf-tar)/PERF-VERSION-FILE; \
 128 rm -r $(perf-tar);                                                  \
 129 $(if $(findstring tar-src,$@),,                                     \
 130 $(if $(findstring bz2,$@),bzip2,                                    \
 131 $(if $(findstring gz,$@),gzip,                                      \
 132 $(if $(findstring xz,$@),xz,                                        \
 133 $(error unknown target $@))))                                       \
 134         -f -9 $(perf-tar).tar)
 135
 136 perf-%pkg: FORCE
 137         $(call cmd,perf_tar)
 138
 139 # Help text displayed when executing 'make help'
 140 # ---------------------------------------------------------------------------
 141 help: FORCE
 142         @echo '  rpm-pkg             - Build both source and binary RPM kernel packages'
 143         @echo '  binrpm-pkg          - Build only the binary kernel RPM package'
 144         @echo '  deb-pkg             - Build both source and binary deb kernel packages'
 145         @echo '  bindeb-pkg          - Build only the binary kernel deb package'
 146         @echo '  tar-pkg             - Build the kernel as an uncompressed tarball'
 147         @echo '  targz-pkg           - Build the kernel as a gzip compressed tarball'
 148         @echo '  tarbz2-pkg          - Build the kernel as a bzip2 compressed tarball'
 149         @echo '  tarxz-pkg           - Build the kernel as a xz compressed tarball'
 150         @echo '  perf-tar-src-pkg    - Build $(perf-tar).tar source tarball'
 151         @echo '  perf-targz-src-pkg  - Build $(perf-tar).tar.gz source tarball'
 152         @echo '  perf-tarbz2-src-pkg - Build $(perf-tar).tar.bz2 source tarball'
 153         @echo '  perf-tarxz-src-pkg  - Build $(perf-tar).tar.xz source tarball'