1 #compdef systemctl loginctl journalctl hostnamectl localectl timedatectl systemd-coredumpctl udevadm systemd-analyze systemd-cat systemd-ask-password systemd-cgls systemd-cgtop systemd-delta systemd-detect-virt systemd-inhibit systemd-machine-id-setup systemd-notify systemd-nspawn systemd-tmpfiles systemd-tty-ask-password-agent
5 local curcontext
="$curcontext" state lstate line
8 # -s for aggregated options like -aP
10 {-h,--help}'[Show help]' \
11 '--version[Show package version]' \
12 {-t,--type=}'[List only units of a particular type]:unit type:(automount device mount path service snapshot socket swap target timer)' \
13 \
*{-p,--property=}'[Show only properties by specific name]:unit property' \
14 {-a,--all}'[Show all units/properties, including dead/empty ones]' \
15 '--reverse[Show reverse dependencies]' \
16 '--after[Show units ordered after]' \
17 '--before[Show units ordered before]' \
18 '--failed[Show only failed units]' \
19 "--full[Don't ellipsize unit names on output]" \
20 '--fail[When queueing a new job, fail if conflicting jobs are pending]' \
21 '--ignore-dependencies[When queueing a new job, ignore all its dependencies]' \
22 '--kill-who=[Who to send signal to]:killwho:(main control all)' \
23 {-s,--signal=}'[Which signal to send]:signal:_signals' \
24 {-H,--host=}'[Show information for remote host]:userathost:_hosts_or_user_at_host' \
25 {-P,--privileged}'[Acquire privileges before execution]' \
26 {-q,--quiet}'[Suppress output]' \
27 '--no-block[Do not wait until operation finished]' \
28 "--no-wall[Don't send wall message before halt/power-off/reboot]" \
29 "--no-reload[When enabling/disabling unit files, don't reload daemon configuration]" \
30 '--no-legend[Do not print a legend, i.e. the column headers and the footer with hints]' \
31 '--no-pager[Do not pipe output into a pager]' \
32 '--no-ask-password[Do not ask for system passwords]' \
33 '--system[Connect to system manager]' \
34 '--user[Connect to user service manager]' \
35 '--global[Enable/disable unit files globally]' \
36 {-f,--force}'[When enabling unit files, override existing symlinks. When shutting down, execute action immediately]' \
37 '--root=[Enable unit files in the specified root directory]:directory:_directories' \
38 '--runtime[Enable unit files only temporarily until next reboot]' \
39 {-n,--lines=}'[Journal entries to show]:number of entries' \
40 {-o,--output=}'[Change journal output mode]:modes:_outputmodes' \
41 '*::systemctl command:_systemctl_command'
45 {-h,--help}'[Show help]' \
46 '--version[Show package version]' \
47 \
*{-p,--property=}'[Show only properties by this name]:unit property' \
48 {-a,--all}'[Show all properties, including empty ones]' \
49 '--kill-who=[Who to send signal to]:killwho:(main control all)' \
50 {-s,--signal=}'[Which signal to send]:signal:_signals' \
51 '--no-ask-password[Do not ask for system passwords]' \
52 {-H,--host=}'[Show information for remote host]:userathost:_hosts_or_user_at_host' \
53 {-P,--privileged}'[Acquire privileges before execution]' \
54 '--no-pager[Do not pipe output into a pager]' \
55 '*::loginctl command:_loginctl_command'
60 {-h,--help}'[Show this help]' \
61 '--version[Show package version]' \
62 '--transient[Only set transient hostname]' \
63 '--static[Only set static hostname]' \
64 '--pretty[Only set pretty hostname]' \
65 '--no-ask-password[Do not prompt for password]' \
66 {-H,--host=}'[Operate on remote host]:userathost:_hosts_or_user_at_host' \
67 '*::hostnamectl commands:_hostnamectl_command'
71 '--since=[Start showing entries newer or of the specified date]:YYYY-MM-DD HH\:MM\:SS' \
72 '--until=[Stop showing entries older or of the specified date]:YYYY-MM-DD HH\:MM\:SS' \
73 {-c,--cursor=}'[Start showing entries from specified cursor]:cursors:_journal_fields __CURSORS' \
74 {-b,--this-boot}'[Show data only from current boot]' \
75 {-u,--unit=}'[Show data only from the specified unit]:units:_journal_fields _SYSTEMD_UNIT' \
76 '--user-unit[Show data only from the specified user session unit]:units:_journal_fields _SYSTEMD_USER_UNIT' \
77 {-p,--priority=}'[Show only messages within the specified priority range]:priority:_journal_fields PRIORITY' \
78 {-f,--follow}'[Follow journal]' \
79 {-n,--lines=}'[Number of journal entries to show]:integer' \
80 '--no-tail[Show all lines, even in follow mode]' \
81 {-o,--output=}'[Change journal output mode]:output modes:_outputmodes' \
82 '--full[Show long fields in full]' \
83 {-a,--all}'[Show all fields, including long and unprintable]' \
84 {-q,--quiet}"[Don't show privilege warning]" \
85 '--no-pager[Do not pipe output into a pager]' \
86 {-m,--merge}'[Show entries from all available journals]' \
87 {-D,--directory=}'[Show journal files from directory]:directories:_directories' \
88 '--interval=[Time interval for changing the FSS sealing key]:time interval' \
89 '--verify-key=[Specify FSS verification key]:FSS key' \
90 {-h,--help}'[Show this help]' \
91 '--version[Show package version]' \
92 '--new-id128[Generate a new 128 Bit ID]' \
93 '--header[Show journal header information]' \
94 '--disk-usage[Show total disk usage]' \
95 {-F,--field=}'[List all values a certain field takes]:Fields:_list_fields' \
96 '--setup-keys[Generate new FSS key pair]' \
97 '--verify[Verify journal file consistency]' \
98 '--list-catalog[List messages in catalog]' \
99 '--update-catalog[Update binary catalog database]' \
100 '*::default: _journal_none'
104 {-h,--help}'[Show this help]' \
105 '--version[Show package version]' \
106 "--no-convert[Don't convert keyboard mappings]" \
107 '--no-pager[Do not pipe output into a pager]' \
108 '--no-ask-password[Do not prompt for password]' \
109 {-H,--host=}'[Operate on remote host]:userathost:_hosts_or_user_at_host' \
110 '*::localectl commands:_localectl_command'
114 {-o,--output=}'[Write output to FILE]:output file:_files' \
115 '--no-pager[Do not pipe output into a pager]' \
116 {-h,--help}'[Show this help]' \
117 '--version[Show package version]' \
118 '*::systemd-coredumpctl commands:_systemd-coredumpctl_command'
123 {-h,--help}'[Show this help]' \
124 '--version[Show package version]' \
125 '--adjust-system-clock[Adjust system clock when changing local RTC mode]' \
126 '--no-pager[Do not pipe output into a pager]' \
127 '--no-ask-password[Do not prompt for password]' \
128 {-H,--host=}'[Operate on remote host]:userathost:_hosts_or_user_at_host' \
129 '*::timedatectl commands:_timedatectl_command'
133 '--debug[Print debug messages to stderr]' \
134 '--version[Print version number]' \
135 '--help[Print help text]' \
136 '*::udevadm commands:_udevadm_command'
140 {-h,--help}'[Show help text.]' \
141 '--user[Shows performance data of user sessions instead of the system manager.]' \
142 '--order[When generating graph for dot, show only order]' \
143 '--require[When generating graph for dot, show only requirement]' \
144 '*::systemd-analyze commands:_systemd_analyze_command'
146 systemd-ask-password
)
148 {-h,--help}'[Show this help]' \
149 '--icon=[Icon name]' \
150 '--timeout=[Timeout in sec]' \
151 '--no-tty[Ask question via agent even on TTY]' \
152 '--accept-cached[Accept cached passwords]' \
153 '--multiple[List multiple passwords if available]'
157 {-h,--help}'[Show this help]' \
158 '--version[Show package version.]' \
159 {-t,--identifier=}'[Set syslog identifier.]' \
160 {-p,--priority=}'[Set priority value.]:value:({0..7})' \
161 '--level-prefix=[Control whether level prefix shall be parsed.]:boolean:(1 0)' \
166 {-h,--help}'[Show this help]' \
167 '--version[Show package version]' \
168 '--no-pager[Do not pipe output into a pager]' \
169 {-a,--all}'[Show all groups, including empty]' \
170 '-k[Include kernel threads in output]' \
171 ':cgroups:(cpuset cpu cpuacct memory devices freezer net_cls blkio)'
175 {-h,--help}'[Show this help]' \
176 '--version[Print version and exit]' \
177 '(-c -m -i -t)-p[Order by path]' \
178 '(-c -p -m -i)-t[Order by number of tasks]' \
179 '(-m -p -i -t)-c[Order by CPU load]' \
180 '(-c -p -i -t)-m[Order by memory load]' \
181 '(-c -m -p -t)-i[Order by IO load]' \
182 {-d,--delay=}'[Specify delay]' \
183 {-n,--iterations=}'[Run for N iterations before exiting]' \
184 {-b,--batch}'[Run in batch mode, accepting no input]' \
185 '--depth=[Maximum traversal depth]'
189 {-h,--help}'[Show this help]' \
190 '--version[Show package version]' \
191 '--no-pager[Do not pipe output into a pager]' \
192 '--diff=[Show a diff when overridden files differ]:boolean:(1 0)' \
193 {-t,--type=}'[Only display a selected set of override types]:types:(masked equivalent redirected overridden unchanged)' \
194 ':SUFFIX:(tmpfiles.d sysctl.d systemd/system)'
198 {-h,--help}'[Show this help]' \
199 '--version[Show package version]' \
200 {-c,--container}'[Only detect whether we are run in a container]' \
201 {-v,--vm}'[Only detect whether we are run in a VM]' \
202 {-q,--quiet}"[Don't output anything, just set return value]"
206 {-h,--help}'[Show this help]' \
207 '--version[Show package version]' \
208 '--what=[Operations to inhibit]:options:(shutdown sleep idle handle-power-key handle-suspend-key handle-hibernate-key handle-lid-switch)' \
209 '--who=[A descriptive string who is inhibiting]' \
210 '--why=[A descriptive string why is being inhibited]' \
211 '--mode=[One of block or delay]' \
212 '--list[List active inhibitors]' \
213 '*:commands:_systemd_inhibit_command'
215 systemd-machine-id-setup
)
217 {-h,--help}'[Show this help]' \
218 '--version[Show package version]'
222 {-h,--help}'[Show this help]' \
223 '--version[Show package version]' \
224 '--ready[Inform the init system about service start-up completion.]' \
225 '--pid=[Inform the init system about the main PID of the daemon]' \
226 '--status=[Send a free-form status string for the daemon to the init systemd]' \
227 '--booted[Returns 0 if the system was booted up with systemd]' \
228 '--readahead=[Controls disk read-ahead operations]:arguments:(cancel done noreply)'
232 {-h,--help}'[Show this help]' \
233 {--directory=,-D}'[Directory to use as file system root for the namespace container. If omitted the current directory will be used.]:directories:_directories' \
234 {--boot,-b}'[Automatically search for an init binary and invoke it instead of a shell or a user supplied program.]' \
235 {--user=,-u}'[Run the command under specified user, create home directory and cd into it.]' \
236 '--uuid=[Set the specified uuid for the container.]' \
237 {--controllers=,-C}'[Makes the container appear in other hierarchies than the name=systemd:/ one. Takes a comma-separated list of controllers.]' \
238 '--private-network[Turn off networking in the container. This makes all network interfaces unavailable in the container, with the exception of the loopback device.]' \
239 '--read-only[Mount the root file system read only for the container.]' \
240 '--capability=[List one or more additional capabilities to grant the container.]:capabilities:_systemd-nspawn' \
241 "--link-journal=[Control whether the container's journal shall be made visible to the host system.]:options:(no, host, guest, auto)" \
242 '-j[Equivalent to --link-journal=guest.]'
246 '--create[Create, set ownership/permissions based on the config files.]' \
247 '--clean[Clean up all files and directories with an age parameter configured.]' \
248 '--remove[All files and directories marked with r, R in the configuration files are removed.]' \
249 '--prefix=[Only apply rules that apply to paths with the specified prefix.]' \
250 '--help[Prints a short help text and exits.]' \
253 systemd-tty-ask-password-agent
)
255 {-h,--help}'[Prints a short help text and exits.]' \
256 '--version[Prints a short version string and exits.]' \
257 '--list[Lists all currently pending system password requests.]' \
258 '--query[Process all currently pending system password requests by querying the user on the calling TTY.]' \
259 '--watch[Continuously process password requests.]' \
260 '--wall[Forward password requests to wall(1).]' \
261 '--plymouth[Ask question with plymouth(8).]' \
262 '--console[Ask question on /dev/console.]'
270 _caps
=( CAP_CHOWN CAP_DAC_OVERRIDE CAP_DAC_READ_SEARCH
271 CAP_FOWNER CAP_FSETID CAP_IPC_OWNER CAP_KILL CAP_LEASE CAP_LINUX_IMMUTABLE
272 CAP_NET_BIND_SERVICE CAP_NET_BROADCAST CAP_NET_RAW CAP_SETGID CAP_SETFCAP CAP_SETPCAP
273 CAP_SETUID CAP_SYS_ADMIN CAP_SYS_CHROOT CAP_SYS_NICE CAP_SYS_PTRACE CAP_SYS_TTY_CONFIG
274 CAP_SYS_RESOURCE CAP_SYS_BOOT
)
275 _values
-s , 'capabilities' "$_caps[@]"
278 _systemd_inhibit_command
(){
279 if (( CURRENT
== 1 )); then
283 local n
=${words[(b:2:i)[^-]*]}
284 if (( n
<= CURRENT
)); then
287 'files:file:_files' \
288 'commands:command:_normal' && return 0
295 _systemd_analyze_command
(){
296 local -a _systemd_analyze_cmds
297 # Descriptions taken from systemd-analyze --help.
298 _systemd_analyze_cmds
=(
299 'time:Print time spent in the kernel before reaching userspace'
300 'blame:Print list of running units ordered by time to init'
301 'critical-chain:Print a tree of the time critical chain of units'
302 'plot:Output SVG graphic showing service initialization'
303 'dot:Dump dependency graph (in dot(1) format)'
306 if (( CURRENT
== 1 )); then
307 _describe
"options" _systemd_analyze_cmds
309 _message
"no more options"
313 _hosts_or_user_at_host
()
316 'users-hosts:: _user_at_host' \
321 local -a _output_opts
322 _output_opts
=(short short-monotonic verbose
export json json-pretty json-see
cat)
323 _describe
-t output
'output mode' _output_opts || compadd
"$@"
327 (( $
+functions
[_systemctl_command
] )) || _systemctl_command
()
329 local -a _systemctl_cmds
331 "list-units:List units"
332 "start:Start (activate) one or more units"
333 "stop:Stop (deactivate) one or more units"
334 "reload:Reload one or more units"
335 "restart:Start or restart one or more units"
336 "condrestart:Restart one or more units if active"
337 "try-restart:Restart one or more units if active"
338 "reload-or-restart:Reload one or more units if possible, otherwise start or restart"
339 "force-reload:Reload one or more units if possible, otherwise restart if active"
340 "hibernate:Hibernate the system"
341 "hybrid-sleep:Hibernate and suspend the system"
342 "reload-or-try-restart:Reload one or more units if possible, otherwise restart if active"
343 "isolate:Start one unit and stop all others"
344 "kill:Send signal to processes of a unit"
345 "is-active:Check whether units are active"
346 "is-failed:Check whether units are failed"
347 "status:Show runtime status of one or more units"
348 "show:Show properties of one or more units/jobs or the manager"
349 "reset-failed:Reset failed state for all, one, or more units"
350 "load:Load one or more units"
351 "list-unit-files:List installed unit files"
352 "enable:Enable one or more unit files"
353 "disable:Disable one or more unit files"
354 "reenable:Reenable one or more unit files"
355 "preset:Enable/disable one or more unit files based on preset configuration"
356 "help:Show documentation for specified units"
357 "list-dependencies:Show unit dependency tree"
358 "mask:Mask one or more units"
359 "unmask:Unmask one or more units"
360 "link:Link one or more units files into the search path"
361 "is-enabled:Check whether unit files are enabled"
362 "list-jobs:List jobs"
363 "cancel:Cancel all, one, or more jobs"
364 "dump:Dump server status"
365 "snapshot:Create a snapshot"
366 "delete:Remove one or more snapshots"
367 "show-environment:Dump environment"
368 "set-environment:Set one or more environment variables"
369 "unset-environment:Unset one or more environment variables"
370 "daemon-reload:Reload systemd manager configuration"
371 "daemon-reexec:Reexecute systemd manager"
372 "default:Enter system default mode"
373 "rescue:Enter system rescue mode"
374 "emergency:Enter system emergency mode"
375 "halt:Shut down and halt the system"
376 "suspend:Suspend the system"
377 "poweroff:Shut down and power-off the system"
378 "reboot:Shut down and reboot the system"
379 "kexec:Shut down and reboot the system with kexec"
380 "exit:Ask for user instance termination"
383 if (( CURRENT
== 1 )); then
384 _describe
-t commands
'systemctl command' _systemctl_cmds || compadd
"$@"
386 local curcontext
="$curcontext"
388 cmd
="${${_systemctl_cmds[(r)$words[1]:*]%%:*}}"
389 # Deal with any aliases
391 condrestart
) cmd
="try-restart";;
392 force-reload
) cmd
="reload-or-try-restart";;
396 curcontext
="${curcontext%:*:*}:systemctl-${cmd}:"
399 zstyle
-s ":completion:${curcontext}:" cache-policy update_policy
400 if [[ -z "$update_policy" ]]; then
401 zstyle
":completion:${curcontext}:" cache-policy _systemctl_caching_policy
404 _call_function ret _systemctl_
$cmd || _message
'no more arguments'
406 _message
"unknown systemctl command: $words[1]"
415 _modes
=("--user" "--system")
416 systemctl
${words:*_modes} --full --no-legend --no-pager "$@"
420 # Fills the unit list
421 _systemctl_all_units
()
423 if ( [[ ${+_sys_all_units} -eq 0 ]] || _cache_invalid SYS_ALL_UNITS
) &&
424 ! _retrieve_cache SYS_ALL_UNITS
;
426 _sys_all_units
=( $
(__systemctl list-units
--all |
{ while read a b
; do echo " $a"; done; }) )
427 _store_cache SYS_ALL_UNITS _sys_all_units
431 # Fills the unit list including all file units
432 _systemctl_really_all_units
()
434 local -a all_unit_files
;
435 local -a really_all_units
;
436 if ( [[ ${+_sys_really_all_units} -eq 0 ]] || _cache_invalid SYS_REALLY_ALL_UNITS
) &&
437 ! _retrieve_cache SYS_REALLY_ALL_UNITS
;
439 all_unit_files
=( $
(__systemctl list-unit-files |
{ while read a b
; do echo " $a"; done; }) )
441 really_all_units
=($_sys_all_units $all_unit_files)
442 _sys_really_all_units
=(${(u)really_all_units})
443 _store_cache SYS_REALLY_ALL_UNITS _sys_really_all_units
447 _filter_units_by_property
() {
448 local property
=$1 value
=$2 ; shift ; shift
449 local -a units
; units
=($
*)
451 for ((i
=1; $i <= ${#units[*]}; i
++)); do
452 # FIXME: "Failed to issue method call: Unknown unit" errors are ignored for
453 # now (related to DBUS_ERROR_UNKNOWN_OBJECT). in the future, we need to
454 # revert to calling 'systemctl show' once for all units, which is way
457 prop
=${(f)"$(_call_program units "$service show --no-pager --property="$property" ${unit} 2>/dev/null")"}
458 if [[ "${prop}" = "$property=$value" ]]; then
464 _systemctl_active_units
() {_sys_active_units
=( $
(__systemctl list-units |
{ while read a b
; do echo " $a"; done; }) )}
465 _systemctl_inactive_units
(){_sys_inactive_units
=($
(__systemctl list-units
--all |
{ while read a b c d
; do [[ $c == "inactive" ||
$c == "failed" ]] && echo " $a"; done; }) )}
466 _systemctl_failed_units
() {_sys_failed_units
=( $
(__systemctl list-units
--failed |
{ while read a b
; do echo " $a"; done; }) )}
467 _systemctl_enabled_units
() {_sys_enabled_units
=( $
(__systemctl list-unit-files |
{ while read a b
; do [[ $b == "enabled" ]] && echo " $a"; done; }) )}
468 _systemctl_disabled_units
(){_sys_disabled_units
=($
(__systemctl list-unit-files |
{ while read a b
; do [[ $b == "disabled" ]] && echo " $a"; done; }) )}
469 _systemctl_masked_units
() {_sys_masked_units
=( $
(__systemctl list-unit-files |
{ while read a b
; do [[ $b == "masked" ]] && echo " $a"; done; }) )}
471 # Completion functions for ALL_UNITS
472 for fun
in is-active is-failed is-enabled status show mask preset
help list-dependencies
; do
473 (( $
+functions
[_systemctl_
$fun] )) || _systemctl_
$fun()
475 _systemctl_really_all_units
476 compadd
"$@" -a - _sys_really_all_units
480 # Completion functions for ENABLED_UNITS
481 for fun
in disable reenable
; do
482 (( $
+functions
[_systemctl_
$fun] )) || _systemctl_
$fun()
484 _systemctl_enabled_units
485 _systemctl_disabled_units
486 compadd
"$@" -a - _sys_enabled_units _sys_disabled_units
490 # Completion functions for DISABLED_UNITS
491 (( $
+functions
[_systemctl_enable
] )) || _systemctl_enable
()
493 _systemctl_disabled_units
494 compadd
"$@" -a - _sys_disabled_units
497 # Completion functions for FAILED_UNITS
498 (( $
+functions
[_systemctl_reset-failed
] )) || _systemctl_reset-failed
()
500 _systemctl_failed_units
501 compadd
"$@" -a - _sys_failed_units || _message
"no failed unit found"
504 # Completion functions for STARTABLE_UNITS
505 (( $
+functions
[_systemctl_start
] )) || _systemctl_start
()
507 _systemctl_inactive_units
508 compadd
"$@" -a - _sys_inactive_units
511 # Completion functions for STOPPABLE_UNITS
512 for fun
in stop
kill try-restart condrestart
; do
513 (( $
+functions
[_systemctl_
$fun] )) || _systemctl_
$fun()
515 _systemctl_active_units
516 compadd
"$@" - $
( _filter_units_by_property CanStop
yes \
517 ${_sys_active_units[*]} )
521 # Completion functions for ISOLATABLE_UNITS
522 (( $
+functions
[_systemctl_isolate
] )) || _systemctl_isolate
()
525 compadd
"$@" - $
( _filter_units_by_property AllowIsolate
yes \
526 ${_sys_all_units[*]} )
529 # Completion functions for RELOADABLE_UNITS
530 for fun
in reload reload-or-try-restart force-reload
; do
531 (( $
+functions
[_systemctl_
$fun] )) || _systemctl_
$fun()
533 _systemctl_active_units
534 compadd
"$@" - $
( _filter_units_by_property CanReload
yes \
535 ${_sys_active_units[*]} )
539 # Completion functions for RESTARTABLE_UNITS
540 for fun
in restart reload-or-restart
; do
541 (( $
+functions
[_systemctl_
$fun] )) || _systemctl_
$fun()
544 compadd
"$@" - $
( _filter_units_by_property CanStart
yes \
545 ${_sys_all_units[*]} |
while read line
; do \
546 [[ "$line" =~ \.device$
]] ||
echo " $line"; \
551 # Completion functions for MASKED_UNITS
552 (( $
+functions
[_systemctl_unmask
] )) || _systemctl_unmask
()
554 _systemctl_masked_units
555 compadd
"$@" -a - _sys_masked_units || _message
"no masked unit found"
558 # Completion functions for JOBS
559 (( $
+functions
[_systemctl_cancel
] )) || _systemctl_cancel
()
561 compadd
"$@" - $
(__systemctl list-jobs \
562 | cut
-d' ' -f1 2>/dev
/null
) || _message
"no job found"
565 # Completion functions for SNAPSHOTS
566 (( $
+functions
[_systemctl_delete
] )) || _systemctl_delete
()
568 compadd
"$@" - $
(__systemctl list-units
--type snapshot
--all \
569 | cut
-d' ' -f1 2>/dev
/null
) || _message
"no snapshot found"
572 # Completion functions for ENVS
573 for fun
in set-environment unset-environment
; do
574 (( $
+functions
[_systemctl_
$fun] )) || _systemctl_
$fun()
576 local fun
=$0 ; fun
=${fun##_systemctl_}
578 if [[ "${fun}" = "set-environment" ]]; then
582 compadd
"$@" ${suf} - $
(systemctl show-environment \
583 |
while read line
; do echo " ${line%%\=}";done )
587 (( $
+functions
[_systemctl_link
] )) || _systemctl_link
() { _files
}
589 # no systemctl completion for:
590 # [STANDALONE]='daemon-reexec daemon-reload default dump
591 # emergency exit halt kexec list-jobs list-units
592 # list-unit-files poweroff reboot rescue show-environment'
593 # [NAME]='snapshot load'
595 _systemctl_caching_policy
()
600 # rebuild if cache is more than a day old
601 oldcache
=( "$1"(mh
+1) )
602 (( $#oldcache )) && return 0
604 _sysunits
=($
(__systemctl
--all | cut
-d' ' -f1))
606 if (( $#_sysunits )); then
607 for unit
in $_sysunits; do
608 [[ "$unit" -nt "$1" ]] && return 0
616 local -a journal_fields
617 journal_fields
=(MESSAGE
{,_ID
} PRIORITY CODE_
{FILE
,LINE
,FUNC
}
618 ERRNO SYSLOG_
{FACILITY
,IDENTIFIER
,PID
}
619 _
{P
,U
,G
}ID _COMM _EXE _CMDLINE
620 _AUDIT_
{SESSION
,LOGINUID
}
621 _SYSTEMD_
{CGROUP
,SESSION
,UNIT
,OWNER_UID
}
623 _SELINUX_CONTEXT _SOURCE_REALTIME_TIMESTAMP
624 _
{BOOT
,MACHINE
}_ID _HOSTNAME _TRANSPORT
625 _KERNEL_
{DEVICE
,SUBSYSTEM
}
626 _UDEV_
{SYSNAME
,DEVNODE
,DEVLINK
}
627 __CURSOR __
{REALTIME
,MONOTONIC
}_TIMESTAMP
)
628 _describe
'possible fields' journal_fields
632 local -a _commands _files
633 _commands
=( ${(f)"$(_call_program commands "$service" -F _EXE 2>/dev/null)"} )
635 'files:/dev files:_files -W /dev -P /dev/' \
636 "commands:commands:($_commands[@])" \
637 'fields:fields:_list_fields'
642 cmd
=("journalctl" "-F ${@[-1]}" "2>/dev/null" )
643 _fields
=( ${(f)"$(_call_program fields $cmd[@])"} )
645 _describe
'possible values' _fields
649 _loginctl_all_sessions
(){_sys_all_sessions
=($
(loginctl list-sessions |
{ while read a b
; do echo " $a"; done; }) )}
650 _loginctl_all_users
() {_sys_all_users
=( $
(loginctl list-users |
{ while read a b
; do echo " $a"; done; }) )}
651 _loginctl_all_seats
() {_sys_all_seats
=( $
(loginctl list-seats |
{ while read a b
; do echo " $a"; done; }) )}
653 # Completion functions for SESSIONS
654 for fun
in session-status show-session activate lock-session unlock-session terminate-session kill-session
; do
655 (( $
+functions
[_loginctl_
$fun] )) || _loginctl_
$fun()
657 _loginctl_all_sessions
658 compadd
"$@" -a - _sys_all_sessions
662 # Completion functions for USERS
663 for fun
in user-status show-user enable-linger disable-linger terminate-user kill-user
; do
664 (( $
+functions
[_loginctl_
$fun] )) || _loginctl_
$fun()
667 compadd
"$@" -a - _sys_all_users
671 # Completion functions for SEATS
672 (( $
+functions
[_loginctl_seats
] )) || _loginctl_seats
()
675 compadd
"$@" -a - _sys_all_seats
677 for fun
in seat-status show-seat terminate-seat
; do
678 (( $
+functions
[_loginctl_
$fun] )) || _loginctl_
$fun()
682 # Completion functions for ATTACH
683 (( $
+functions
[_loginctl_attach
] )) || _loginctl_attach
()
687 _arguments
-w -C -S -s \
688 ':seat:_loginctl_seats' \
692 # no loginctl completion for:
693 # [STANDALONE]='list-sessions list-users list-seats flush-devices'
695 (( $
+functions
[_loginctl_command
] )) || _loginctl_command
()
697 local -a _loginctl_cmds
699 "list-sessions:List sessions"
700 "session-status:Show session status"
701 "show-session:Show properties of one or more sessions"
702 "activate:Activate a session"
703 "lock-session:Screen lock one or more sessions"
704 "unlock-session:Screen unlock one or more sessions"
705 "terminate-session:Terminate one or more sessions"
706 "kill-session:Send signal to processes of a session"
707 "list-users:List users"
708 "user-status:Show user status"
709 "show-user:Show properties of one or more users"
710 "enable-linger:Enable linger state of one or more users"
711 "disable-linger:Disable linger state of one or more users"
712 "terminate-user:Terminate all sessions of one or more users"
713 "kill-user:Send signal to processes of a user"
714 "list-seats:List seats"
715 "seat-status:Show seat status"
716 "show-seat:Show properties of one or more seats"
717 "attach:Attach one or more devices to a seat"
718 "flush-devices:Flush all device associations"
719 "terminate-seat:Terminate all sessions on one or more seats"
722 if (( CURRENT
== 1 )); then
723 _describe
-t commands
'loginctl command' _loginctl_cmds || compadd
"$@"
725 local curcontext
="$curcontext"
727 cmd
="${${_loginctl_cmds[(r)$words[1]:*]%%:*}}"
730 curcontext
="${curcontext%:*:*}:loginctl-${cmd}:"
732 _call_function ret _loginctl_
$cmd || _message
'no more arguments'
734 _message
"unknown loginctl command: $words[1]"
740 _hostnamectl_command
() {
741 local -a _hostnamectl_cmds
743 "status:Show current hostname settings"
744 "set-hostname:Set system hostname"
745 "set-icon-name:Set icon name for host"
747 if (( CURRENT
== 1 )); then
748 _describe
-t commands
'hostnamectl commands' _hostnamectl_cmds || compadd
"$@"
750 local curcontext
="$curcontext"
751 cmd
="${${_hostnamectl_cmds[(r)$words[1]:*]%%:*}}"
753 [[ $cmd == status
]] && msg
="no options" || msg
="options for $cmd"
756 _message
"unknown hostnamectl command: $words[1]"
761 _localectl_set-locale
() {
762 local -a _confs _locales
764 _locales
=( ${(f)"$(_call_program locales "$service" list-locales)"} )
765 _confs
=( ${${(f)"$(_call_program confs "locale 2>/dev/null")"}%\
=*} )
766 if [[ -prefix 1 *\
= ]]; then
767 local conf
=${PREFIX%%\=*}
769 _wanted locales expl
"locales configs" \
770 _combination localeconfs confs
=$conf locales
"$@" -
772 compadd
-S '=' $_confs
776 _localectl_set-keymap
() {
778 _keymaps
=( ${(f)"$(_call_program locales "$service" list-keymaps)"} )
779 if (( CURRENT
<= 3 )); then
780 _describe keymaps _keymaps
782 _message
"no more options"
786 _localectl_set-x11-keymap
() {
787 if (( $
+commands
[pkg-config
] )); then
788 local -a _file _layout _model _variant _options
790 _xorg_lst
=${"$($commands[pkg-config] xkeyboard-config --variable=xkb_base)"}
791 _file
=( ${(ps:\n\!:)"$(<$_xorg_lst/rules/xorg.lst)"} )
792 _layout
=( ${${${(M)${(f)_file[1]}:# *}# }%% *} )
793 _model
=( ${${${(M)${(f)_file[2]}:# *}# }%% *} )
794 _variant
=( ${${${(M)${(f)_file[3]}:# *}# }%% *} )
795 _options
=( ${${${(M)${(f)_file[4]}:# *}# }%% *} )
796 #_layout=( ${(f)"$( echo $_file[1] | awk '/^ / {print $1}' )"} )
797 #_model=( ${(f)"$(echo $_file[2] | awk '/^ / {print $1}')"} )
798 #_variant=( ${(f)"$(echo $_file[3] | awk '/^ / {print $1}')"} )
799 #_options=( ${(f)"$(echo ${_file[4]//:/\\:} | awk '/^ / {print $1}')"} )
802 2) _describe layouts _layout
;;
803 3) _describe models _model
;;
804 4) _describe variants _variant
;;
805 5) _describe options _options
;;
806 *) _message
"no more options"
812 _localectl_command
() {
813 local -a _localectl_cmds
815 'status:Show current locale settings'
816 'set-locale:Set system locale'
817 'list-locales:Show known locales'
818 'set-keymap:Set virtual console keyboard mapping'
819 'list-keymaps:Show known virtual console keyboard mappings'
820 'set-x11-keymap:Set X11 keyboard mapping'
822 if (( CURRENT
== 1 )); then
823 _describe
-t commands
'localectl command' _localectl_cmds
825 local curcontext
="$curcontext"
826 cmd
="${${_localectl_cmds[(r)$words[1]:*]%%:*}}"
827 if (( $
+functions
[_localectl_
$cmd] )); then
830 _message
"no more options"
835 _timedatectl_set-timezone
(){
837 _timezones
=( ${(f)"$(_call_program timezones "${service}" list-timezones)"} )
838 compadd
"$_timezones[@]"
841 _timedatectl_set-time
(){
842 _message
"YYYY-MM-DD HH:MM:SS"
845 _timedatectl_set-local-rtc
(){
848 '0:Maintain RTC in universal time'
849 '1:Maintain RTC in local time'
851 _describe options _options
854 _timedatectl_set-ntp
(){
857 '0:Disable NTP based network time configuration'
858 '1:Enable NTP based network time configuration'
860 _describe options _options
863 _timedatectl_command
(){
864 local -a _timedatectl_cmds
866 'status:Show current time settings'
867 'set-time:Set system time'
868 'set-timezone:Set system timezone'
869 'list-timezones:Show known timezones'
870 'set-local-rtc:Control whether RTC is in local time'
871 'set-ntp:Control whether NTP is enabled'
873 if (( CURRENT
== 1 )); then
874 _describe
-t commands
'timedatectl command' _timedatectl_cmds
876 local curcontext
="$curcontext"
877 cmd
="${${_timedatectl_cmds[(r)$words[1]:*]%%:*}}"
879 if (( $
+functions
[_timedatectl_
$cmd] )); then
882 _message
"no more options"
885 _message
"unknown timedatectl command: $words[1]"
889 _systemd-coredumpctl_command
(){
890 local -a _systemd_coredumpctl_cmds
891 _systemd_coredumpctl_cmds
=(
892 'list:List available coredumps'
893 'dump:Print coredump to std'
895 if (( CURRENT
== 1 )); then
896 _describe
-t commands
'systemd-coredumpctl command' _systemd_coredumpctl_cmds
898 local curcontext
="$curcontext"
900 cmd
="${${_systemd_coredumpctl_cmds[(r)$words[1]:*]%%:*}}"
902 # user can set zstyle ':completion:*:*:systemd-coredumpctl:*' sort no for coredumps to be ordered by date, otherwise they get ordered by pid
903 _dumps
=( "${(foa)$(systemd-coredumpctl list | awk 'BEGIN{OFS=":"} /^\s/ {sub(/[[ \t]+/, ""); print $5,$0}' 2>/dev/null)}" )
904 if [[ -n "$_dumps" ]]; then
905 _describe
-t pids
'coredumps' _dumps
907 _message
"no coredumps"
910 _message
"no more options"
919 '--query=[Query the database for specified type of device data. It needs the --path or --name to identify the specified device.]:type:(name symlink path property all)' \
920 '--path=[The devpath of the device to query.]:sys files:_files -P /sys/ -W /sys' \
921 '--name=[The name of the device node or a symlink to query]:device files:_files -P /dev/ -W /dev' \
922 '--root[Print absolute paths in name or symlink query.]' \
923 '--attribute-walk[Print all sysfs properties of the specified device that can be used in udev rules to match the specified device]' \
924 '--export[Print output as key/value pairs.]' \
925 '--export-prefix=[Add a prefix to the key name of exported values.]:prefix' \
926 '--device-id-of-file=[Print major/minor numbers of the underlying device, where the file lives on.]:files:_udevadm_mounts' \
927 '--export-db[Export the content of the udev database.]' \
928 '--cleanup-db[Cleanup the udev database.]'
933 '--verbose[Print the list of devices which will be triggered.]' \
934 '--dry-run[Do not actually trigger the event.]' \
935 '--type=[Trigger a specific type of devices.]:types:(devices subsystems failed)' \
936 '--action=[Type of event to be triggered.]:actions:(add change remove)' \
937 '--subsystem-match=[Trigger events for devices which belong to a matching subsystem.]' \
938 '--subsystem-nomatch=[Do not trigger events for devices which belong to a matching subsystem.]' \
939 '--attr-match=attribute=[Trigger events for devices with a matching sysfs attribute.]' \
940 '--attr-nomatch=attribute=[Do not trigger events for devices with a matching sysfs attribute.]' \
941 '--property-match=[Trigger events for devices with a matching property value.]' \
942 '--tag-match=property[Trigger events for devices with a matching tag.]' \
943 '--sysname-match=[Trigger events for devices with a matching sys device name.]' \
944 '--parent-match=[Trigger events for all children of a given device.]'
949 '--timeout=[Maximum number of seconds to wait for the event queue to become empty.]' \
950 '--seq-start=[Wait only for events after the given sequence number.]' \
951 '--seq-end=[Wait only for events before the given sequence number.]' \
952 '--exit-if-exists=[Stop waiting if file exists.]:files:_files' \
953 '--quiet[Do not print any output, like the remaining queue entries when reaching the timeout.]' \
954 '--help[Print help text.]'
959 '--exit[Signal and wait for systemd-udevd to exit.]' \
960 '--log-priority=[Set the internal log level of systemd-udevd.]:priorities:(err info debug)' \
961 '--stop-exec-queue[Signal systemd-udevd to stop executing new events. Incoming events will be queued.]' \
962 '--start-exec-queue[Signal systemd-udevd to enable the execution of events.]' \
963 '--reload[Signal systemd-udevd to reload the rules files and other databases like the kernel module index.]' \
964 '--property=[Set a global property for all events.]' \
965 '--children-max=[Set the maximum number of events.]' \
966 '--timeout=[The maximum number of seconds to wait for a reply from systemd-udevd.]' \
967 '--help[Print help text.]'
972 '--kernel[Print the kernel uevents.]' \
973 '--udev[Print the udev event after the rule processing.]' \
974 '--property[Also print the properties of the event.]' \
975 '--subsystem-match=[Filter events by subsystem/\[devtype\].]' \
976 '--tag-match=[Filter events by property.]' \
977 '--help[Print help text.]'
982 '--action=[The action string.]:actions:(add change remove)' \
983 '--subsystem=[The subsystem string.]' \
984 '--help[Print help text.]' \
985 '*::devpath:_files -P /sys/ -W /sys'
988 _udevadm_test-builtin
(){
989 if (( CURRENT
== 2 )); then
991 '--help[Print help text]' \
992 '*::builtins:(blkid btrfs hwdb input_id kmod path_id usb_id uaccess)'
993 elif (( CURRENT
== 3 )); then
995 '--help[Print help text]' \
996 '*::syspath:_files -P /sys -W /sys'
999 '--help[Print help text]'
1004 local dev_tmp dpath_tmp mp_tmp mline
1006 tmp
=( "${(@f)$(< /etc/mtab)}" )
1007 dev_tmp
=( "${(@)${(@)tmp%% *}:#none}" )
1008 mp_tmp
=( "${(@)${(@)tmp#* }%% *}" )
1011 mp_tmp
=("${(@q)mp_tmp//(#m)\\[0-7](#c3)/${(#)$(( 8#${MATCH[2,-1]} ))}}")
1012 dpath_tmp
=( "${(@Mq)dev_tmp:#/*}" )
1013 dev_tmp
=( "${(@q)dev_tmp:#/*}" )
1016 'device-paths: device path:compadd -a dpath_tmp' \
1017 'directories:mount point:compadd -a mp_tmp'
1022 local -a _udevadm_cmds
1024 'info:query sysfs or the udev database'
1025 'trigger:request events from the kernel'
1026 'settle:wait for the event queue to finish'
1027 'control:control the udev daemon'
1028 'monitor:listen to kernel and udev events'
1029 'test:test an event run'
1030 'test-builtin:test a built-in command'
1033 if ((CURRENT
== 1)); then
1034 _describe
-t commands
'udevadm commands' _udevadm_cmds
1036 local curcontext
="$curcontext"
1037 cmd
="${${_udevadm_cmds[(r)$words[1]:*]%%:*}}"
1039 if (( $
+functions
[_udevadm_
$cmd] )); then
1042 _message
"no options for $cmd"
1045 _message
"no more options"
1052 #vim: set ft=zsh sw=4 ts=4 et