]> git.proxmox.com Git - mirror_ubuntu-kernels.git/blob - sound/firewire/tascam/tascam-transaction.c
locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns to READ_...
[mirror_ubuntu-kernels.git] / sound / firewire / tascam / tascam-transaction.c
1 /*
2 * tascam-transaction.c - a part of driver for TASCAM FireWire series
3 *
4 * Copyright (c) 2015 Takashi Sakamoto
5 *
6 * Licensed under the terms of the GNU General Public License, version 2.
7 */
8
9 #include "tascam.h"
10
11 /*
12 * When return minus value, given argument is not MIDI status.
13 * When return 0, given argument is a beginning of system exclusive.
14 * When return the others, given argument is MIDI data.
15 */
16 static inline int calculate_message_bytes(u8 status)
17 {
18 switch (status) {
19 case 0xf6: /* Tune request. */
20 case 0xf8: /* Timing clock. */
21 case 0xfa: /* Start. */
22 case 0xfb: /* Continue. */
23 case 0xfc: /* Stop. */
24 case 0xfe: /* Active sensing. */
25 case 0xff: /* System reset. */
26 return 1;
27 case 0xf1: /* MIDI time code quarter frame. */
28 case 0xf3: /* Song select. */
29 return 2;
30 case 0xf2: /* Song position pointer. */
31 return 3;
32 case 0xf0: /* Exclusive. */
33 return 0;
34 case 0xf7: /* End of exclusive. */
35 break;
36 case 0xf4: /* Undefined. */
37 case 0xf5: /* Undefined. */
38 case 0xf9: /* Undefined. */
39 case 0xfd: /* Undefined. */
40 break;
41 default:
42 switch (status & 0xf0) {
43 case 0x80: /* Note on. */
44 case 0x90: /* Note off. */
45 case 0xa0: /* Polyphonic key pressure. */
46 case 0xb0: /* Control change and Mode change. */
47 case 0xe0: /* Pitch bend change. */
48 return 3;
49 case 0xc0: /* Program change. */
50 case 0xd0: /* Channel pressure. */
51 return 2;
52 default:
53 break;
54 }
55 break;
56 }
57
58 return -EINVAL;
59 }
60
61 static int fill_message(struct snd_fw_async_midi_port *port,
62 struct snd_rawmidi_substream *substream)
63 {
64 int i, len, consume;
65 u8 *label, *msg;
66 u8 status;
67
68 /* The first byte is used for label, the rest for MIDI bytes. */
69 label = port->buf;
70 msg = port->buf + 1;
71
72 consume = snd_rawmidi_transmit_peek(substream, msg, 3);
73 if (consume == 0)
74 return 0;
75
76 /* On exclusive message. */
77 if (port->on_sysex) {
78 /* Seek the end of exclusives. */
79 for (i = 0; i < consume; ++i) {
80 if (msg[i] == 0xf7) {
81 port->on_sysex = false;
82 break;
83 }
84 }
85
86 /* At the end of exclusive message, use label 0x07. */
87 if (!port->on_sysex) {
88 consume = i + 1;
89 *label = (substream->number << 4) | 0x07;
90 /* During exclusive message, use label 0x04. */
91 } else if (consume == 3) {
92 *label = (substream->number << 4) | 0x04;
93 /* We need to fill whole 3 bytes. Go to next change. */
94 } else {
95 return 0;
96 }
97
98 len = consume;
99 } else {
100 /* The beginning of exclusives. */
101 if (msg[0] == 0xf0) {
102 /* Transfer it in next chance in another condition. */
103 port->on_sysex = true;
104 return 0;
105 } else {
106 /* On running-status. */
107 if ((msg[0] & 0x80) != 0x80)
108 status = port->running_status;
109 else
110 status = msg[0];
111
112 /* Calculate consume bytes. */
113 len = calculate_message_bytes(status);
114 if (len <= 0)
115 return 0;
116
117 /* On running-status. */
118 if ((msg[0] & 0x80) != 0x80) {
119 /* Enough MIDI bytes were not retrieved. */
120 if (consume < len - 1)
121 return 0;
122 consume = len - 1;
123
124 msg[2] = msg[1];
125 msg[1] = msg[0];
126 msg[0] = port->running_status;
127 } else {
128 /* Enough MIDI bytes were not retrieved. */
129 if (consume < len)
130 return 0;
131 consume = len;
132
133 port->running_status = msg[0];
134 }
135 }
136
137 *label = (substream->number << 4) | (msg[0] >> 4);
138 }
139
140 if (len > 0 && len < 3)
141 memset(msg + len, 0, 3 - len);
142
143 return consume;
144 }
145
146 static void async_midi_port_callback(struct fw_card *card, int rcode,
147 void *data, size_t length,
148 void *callback_data)
149 {
150 struct snd_fw_async_midi_port *port = callback_data;
151 struct snd_rawmidi_substream *substream = READ_ONCE(port->substream);
152
153 /* This port is closed. */
154 if (substream == NULL)
155 return;
156
157 if (rcode == RCODE_COMPLETE)
158 snd_rawmidi_transmit_ack(substream, port->consume_bytes);
159 else if (!rcode_is_permanent_error(rcode))
160 /* To start next transaction immediately for recovery. */
161 port->next_ktime = 0;
162 else
163 /* Don't continue processing. */
164 port->error = true;
165
166 port->idling = true;
167
168 if (!snd_rawmidi_transmit_empty(substream))
169 schedule_work(&port->work);
170 }
171
172 static void midi_port_work(struct work_struct *work)
173 {
174 struct snd_fw_async_midi_port *port =
175 container_of(work, struct snd_fw_async_midi_port, work);
176 struct snd_rawmidi_substream *substream = READ_ONCE(port->substream);
177 int generation;
178
179 /* Under transacting or error state. */
180 if (!port->idling || port->error)
181 return;
182
183 /* Nothing to do. */
184 if (substream == NULL || snd_rawmidi_transmit_empty(substream))
185 return;
186
187 /* Do it in next chance. */
188 if (ktime_after(port->next_ktime, ktime_get())) {
189 schedule_work(&port->work);
190 return;
191 }
192
193 /*
194 * Fill the buffer. The callee must use snd_rawmidi_transmit_peek().
195 * Later, snd_rawmidi_transmit_ack() is called.
196 */
197 memset(port->buf, 0, 4);
198 port->consume_bytes = fill_message(port, substream);
199 if (port->consume_bytes <= 0) {
200 /* Do it in next chance, immediately. */
201 if (port->consume_bytes == 0) {
202 port->next_ktime = 0;
203 schedule_work(&port->work);
204 } else {
205 /* Fatal error. */
206 port->error = true;
207 }
208 return;
209 }
210
211 /* Set interval to next transaction. */
212 port->next_ktime = ktime_add_ns(ktime_get(),
213 port->consume_bytes * 8 * NSEC_PER_SEC / 31250);
214
215 /* Start this transaction. */
216 port->idling = false;
217
218 /*
219 * In Linux FireWire core, when generation is updated with memory
220 * barrier, node id has already been updated. In this module, After
221 * this smp_rmb(), load/store instructions to memory are completed.
222 * Thus, both of generation and node id are available with recent
223 * values. This is a light-serialization solution to handle bus reset
224 * events on IEEE 1394 bus.
225 */
226 generation = port->parent->generation;
227 smp_rmb();
228
229 fw_send_request(port->parent->card, &port->transaction,
230 TCODE_WRITE_QUADLET_REQUEST,
231 port->parent->node_id, generation,
232 port->parent->max_speed,
233 TSCM_ADDR_BASE + TSCM_OFFSET_MIDI_RX_QUAD,
234 port->buf, 4, async_midi_port_callback,
235 port);
236 }
237
238 void snd_fw_async_midi_port_init(struct snd_fw_async_midi_port *port)
239 {
240 port->idling = true;
241 port->error = false;
242 port->running_status = 0;
243 port->on_sysex = false;
244 }
245
246 static void handle_midi_tx(struct fw_card *card, struct fw_request *request,
247 int tcode, int destination, int source,
248 int generation, unsigned long long offset,
249 void *data, size_t length, void *callback_data)
250 {
251 struct snd_tscm *tscm = callback_data;
252 u32 *buf = (u32 *)data;
253 unsigned int messages;
254 unsigned int i;
255 unsigned int port;
256 struct snd_rawmidi_substream *substream;
257 u8 *b;
258 int bytes;
259
260 if (offset != tscm->async_handler.offset)
261 goto end;
262
263 messages = length / 8;
264 for (i = 0; i < messages; i++) {
265 b = (u8 *)(buf + i * 2);
266
267 port = b[0] >> 4;
268 /* TODO: support virtual MIDI ports. */
269 if (port >= tscm->spec->midi_capture_ports)
270 goto end;
271
272 /* Assume the message length. */
273 bytes = calculate_message_bytes(b[1]);
274 /* On MIDI data or exclusives. */
275 if (bytes <= 0) {
276 /* Seek the end of exclusives. */
277 for (bytes = 1; bytes < 4; bytes++) {
278 if (b[bytes] == 0xf7)
279 break;
280 }
281 if (bytes == 4)
282 bytes = 3;
283 }
284
285 substream = READ_ONCE(tscm->tx_midi_substreams[port]);
286 if (substream != NULL)
287 snd_rawmidi_receive(substream, b + 1, bytes);
288 }
289 end:
290 fw_send_response(card, request, RCODE_COMPLETE);
291 }
292
293 int snd_tscm_transaction_register(struct snd_tscm *tscm)
294 {
295 static const struct fw_address_region resp_register_region = {
296 .start = 0xffffe0000000ull,
297 .end = 0xffffe000ffffull,
298 };
299 unsigned int i;
300 int err;
301
302 /*
303 * Usually, two quadlets are transferred by one transaction. The first
304 * quadlet has MIDI messages, the rest includes timestamp.
305 * Sometimes, 8 set of the data is transferred by a block transaction.
306 */
307 tscm->async_handler.length = 8 * 8;
308 tscm->async_handler.address_callback = handle_midi_tx;
309 tscm->async_handler.callback_data = tscm;
310
311 err = fw_core_add_address_handler(&tscm->async_handler,
312 &resp_register_region);
313 if (err < 0)
314 return err;
315
316 err = snd_tscm_transaction_reregister(tscm);
317 if (err < 0)
318 goto error;
319
320 for (i = 0; i < TSCM_MIDI_OUT_PORT_MAX; i++) {
321 tscm->out_ports[i].parent = fw_parent_device(tscm->unit);
322 tscm->out_ports[i].next_ktime = 0;
323 INIT_WORK(&tscm->out_ports[i].work, midi_port_work);
324 }
325
326 return err;
327 error:
328 fw_core_remove_address_handler(&tscm->async_handler);
329 tscm->async_handler.callback_data = NULL;
330 return err;
331 }
332
333 /* At bus reset, these registers are cleared. */
334 int snd_tscm_transaction_reregister(struct snd_tscm *tscm)
335 {
336 struct fw_device *device = fw_parent_device(tscm->unit);
337 __be32 reg;
338 int err;
339
340 /* Register messaging address. Block transaction is not allowed. */
341 reg = cpu_to_be32((device->card->node_id << 16) |
342 (tscm->async_handler.offset >> 32));
343 err = snd_fw_transaction(tscm->unit, TCODE_WRITE_QUADLET_REQUEST,
344 TSCM_ADDR_BASE + TSCM_OFFSET_MIDI_TX_ADDR_HI,
345 &reg, sizeof(reg), 0);
346 if (err < 0)
347 return err;
348
349 reg = cpu_to_be32(tscm->async_handler.offset);
350 err = snd_fw_transaction(tscm->unit, TCODE_WRITE_QUADLET_REQUEST,
351 TSCM_ADDR_BASE + TSCM_OFFSET_MIDI_TX_ADDR_LO,
352 &reg, sizeof(reg), 0);
353 if (err < 0)
354 return err;
355
356 /* Turn on messaging. */
357 reg = cpu_to_be32(0x00000001);
358 err = snd_fw_transaction(tscm->unit, TCODE_WRITE_QUADLET_REQUEST,
359 TSCM_ADDR_BASE + TSCM_OFFSET_MIDI_TX_ON,
360 &reg, sizeof(reg), 0);
361 if (err < 0)
362 return err;
363
364 /* Turn on FireWire LED. */
365 reg = cpu_to_be32(0x0001008e);
366 return snd_fw_transaction(tscm->unit, TCODE_WRITE_QUADLET_REQUEST,
367 TSCM_ADDR_BASE + TSCM_OFFSET_LED_POWER,
368 &reg, sizeof(reg), 0);
369 }
370
371 void snd_tscm_transaction_unregister(struct snd_tscm *tscm)
372 {
373 __be32 reg;
374
375 if (tscm->async_handler.callback_data == NULL)
376 return;
377
378 /* Turn off FireWire LED. */
379 reg = cpu_to_be32(0x0000008e);
380 snd_fw_transaction(tscm->unit, TCODE_WRITE_QUADLET_REQUEST,
381 TSCM_ADDR_BASE + TSCM_OFFSET_LED_POWER,
382 &reg, sizeof(reg), 0);
383
384 /* Turn off messaging. */
385 reg = cpu_to_be32(0x00000000);
386 snd_fw_transaction(tscm->unit, TCODE_WRITE_QUADLET_REQUEST,
387 TSCM_ADDR_BASE + TSCM_OFFSET_MIDI_TX_ON,
388 &reg, sizeof(reg), 0);
389
390 /* Unregister the address. */
391 snd_fw_transaction(tscm->unit, TCODE_WRITE_QUADLET_REQUEST,
392 TSCM_ADDR_BASE + TSCM_OFFSET_MIDI_TX_ADDR_HI,
393 &reg, sizeof(reg), 0);
394 snd_fw_transaction(tscm->unit, TCODE_WRITE_QUADLET_REQUEST,
395 TSCM_ADDR_BASE + TSCM_OFFSET_MIDI_TX_ADDR_LO,
396 &reg, sizeof(reg), 0);
397
398 fw_core_remove_address_handler(&tscm->async_handler);
399 tscm->async_handler.callback_data = NULL;
400 }