1 // SPDX-License-Identifier: GPL-2.0-only
3 * ALSA driver for Echoaudio soundcards.
4 * Copyright (C) 2003-2004 Giuliano Pochini <pochini@shiny.it>
8 #define ECHOCARD_GINA24
9 #define ECHOCARD_NAME "Gina24"
10 #define ECHOCARD_HAS_MONITOR
11 #define ECHOCARD_HAS_ASIC
12 #define ECHOCARD_HAS_INPUT_NOMINAL_LEVEL
13 #define ECHOCARD_HAS_OUTPUT_NOMINAL_LEVEL
14 #define ECHOCARD_HAS_SUPER_INTERLEAVE
15 #define ECHOCARD_HAS_DIGITAL_IO
16 #define ECHOCARD_HAS_DIGITAL_IN_AUTOMUTE
17 #define ECHOCARD_HAS_DIGITAL_MODE_SWITCH
18 #define ECHOCARD_HAS_EXTERNAL_CLOCK
19 #define ECHOCARD_HAS_ADAT 6
20 #define ECHOCARD_HAS_STEREO_BIG_ENDIAN32
23 #define PX_ANALOG_OUT 0 /* 8 */
24 #define PX_DIGITAL_OUT 8 /* 8 */
25 #define PX_ANALOG_IN 16 /* 2 */
26 #define PX_DIGITAL_IN 18 /* 8 */
30 #define BX_ANALOG_OUT 0 /* 8 */
31 #define BX_DIGITAL_OUT 8 /* 8 */
32 #define BX_ANALOG_IN 16 /* 2 */
33 #define BX_DIGITAL_IN 18 /* 8 */
37 #include <linux/delay.h>
38 #include <linux/init.h>
39 #include <linux/interrupt.h>
40 #include <linux/pci.h>
41 #include <linux/module.h>
42 #include <linux/firmware.h>
43 #include <linux/slab.h>
45 #include <sound/core.h>
46 #include <sound/info.h>
47 #include <sound/control.h>
48 #include <sound/tlv.h>
49 #include <sound/pcm.h>
50 #include <sound/pcm_params.h>
51 #include <sound/asoundef.h>
52 #include <sound/initval.h>
53 #include <linux/atomic.h>
54 #include "echoaudio.h"
56 MODULE_FIRMWARE("ea/loader_dsp.fw");
57 MODULE_FIRMWARE("ea/gina24_301_dsp.fw");
58 MODULE_FIRMWARE("ea/gina24_361_dsp.fw");
59 MODULE_FIRMWARE("ea/gina24_301_asic.fw");
60 MODULE_FIRMWARE("ea/gina24_361_asic.fw");
62 #define FW_361_LOADER 0
63 #define FW_GINA24_301_DSP 1
64 #define FW_GINA24_361_DSP 2
65 #define FW_GINA24_301_ASIC 3
66 #define FW_GINA24_361_ASIC 4
68 static const struct firmware card_fw
[] = {
70 {0, "gina24_301_dsp.fw"},
71 {0, "gina24_361_dsp.fw"},
72 {0, "gina24_301_asic.fw"},
73 {0, "gina24_361_asic.fw"}
76 static const struct pci_device_id snd_echo_ids
[] = {
77 {0x1057, 0x1801, 0xECC0, 0x0050, 0, 0, 0}, /* DSP 56301 Gina24 rev.0 */
78 {0x1057, 0x1801, 0xECC0, 0x0051, 0, 0, 0}, /* DSP 56301 Gina24 rev.1 */
79 {0x1057, 0x3410, 0xECC0, 0x0050, 0, 0, 0}, /* DSP 56361 Gina24 rev.0 */
80 {0x1057, 0x3410, 0xECC0, 0x0051, 0, 0, 0}, /* DSP 56361 Gina24 rev.1 */
84 static struct snd_pcm_hardware pcm_hardware_skel
= {
85 .info
= SNDRV_PCM_INFO_MMAP
|
86 SNDRV_PCM_INFO_INTERLEAVED
|
87 SNDRV_PCM_INFO_BLOCK_TRANSFER
|
88 SNDRV_PCM_INFO_MMAP_VALID
|
89 SNDRV_PCM_INFO_PAUSE
|
90 SNDRV_PCM_INFO_SYNC_START
,
91 .formats
= SNDRV_PCM_FMTBIT_U8
|
92 SNDRV_PCM_FMTBIT_S16_LE
|
93 SNDRV_PCM_FMTBIT_S24_3LE
|
94 SNDRV_PCM_FMTBIT_S32_LE
|
95 SNDRV_PCM_FMTBIT_S32_BE
,
96 .rates
= SNDRV_PCM_RATE_8000_48000
|
97 SNDRV_PCM_RATE_88200
|
103 .buffer_bytes_max
= 262144,
104 .period_bytes_min
= 32,
105 .period_bytes_max
= 131072,
108 /* One page (4k) contains 512 instructions. I don't know if the hw
109 supports lists longer than this. In this case periods_max=220 is a
110 safe limit to make sure the list never exceeds 512 instructions.
111 220 ~= (512 - 1 - (BUFFER_BYTES_MAX / PAGE_SIZE)) / 2 */
114 #include "gina24_dsp.c"
115 #include "echoaudio_dsp.c"
116 #include "echoaudio_gml.c"
117 #include "echoaudio.c"