sound/soc/blackfin/Kconfig

   1 config SND_BF5XX_I2S
   2         tristate "SoC I2S Audio for the ADI Blackfin chip"
   3         depends on BLACKFIN
   4         select SND_BF5XX_SOC_SPORT if !BF60x
   5         select SND_BF6XX_SOC_SPORT if BF60x
   6         help
   7           Say Y or M if you want to add support for codecs attached to
   8           the Blackfin SPORT (synchronous serial ports) interface in I2S
   9           mode (supports single stereo In/Out).
  10           You will also need to select the audio interfaces to support below.
  11
  12 config SND_BF5XX_SOC_SSM2602
  13         tristate "SoC SSM2602 Audio Codec Add-On Card support"
  14         depends on SND_BF5XX_I2S && (SPI_MASTER || I2C)
  15         select SND_BF5XX_SOC_I2S if !BF60x
  16         select SND_BF6XX_SOC_I2S if BF60x
  17         select SND_SOC_SSM2602
  18         help
  19           Say Y if you want to add support for the Analog Devices
  20           SSM2602 Audio Codec Add-On Card.
  21
  22 config SND_SOC_BFIN_EVAL_ADAU1701
  23         tristate "Support for the EVAL-ADAU1701MINIZ board on Blackfin eval boards"
  24         depends on SND_BF5XX_I2S
  25         select SND_BF5XX_SOC_I2S
  26         select SND_SOC_ADAU1701
  27         select I2C
  28         help
  29           Say Y if you want to add support for the Analog Devices EVAL-ADAU1701MINIZ
  30           board connected to one of the Blackfin evaluation boards like the
  31           BF5XX-STAMP or BF5XX-EZKIT.
  32
  33 config SND_SOC_BFIN_EVAL_ADAU1373
  34         tristate "Support for the EVAL-ADAU1373 board on Blackfin eval boards"
  35         depends on SND_BF5XX_I2S && I2C
  36         select SND_BF5XX_SOC_I2S
  37         select SND_SOC_ADAU1373
  38         help
  39           Say Y if you want to add support for the Analog Devices EVAL-ADAU1373
  40           board connected to one of the Blackfin evaluation boards like the
  41           BF5XX-STAMP or BF5XX-EZKIT.
  42
  43           Note: This driver assumes that first ADAU1373 DAI is connected to the
  44           first SPORT port on the BF5XX board.
  45
  46 config SND_SOC_BFIN_EVAL_ADAV80X
  47         tristate "Support for the EVAL-ADAV80X boards on Blackfin eval boards"
  48         depends on SND_BF5XX_I2S && (SPI_MASTER || I2C)
  49         select SND_BF5XX_SOC_I2S
  50         select SND_SOC_ADAV80X
  51         help
  52           Say Y if you want to add support for the Analog Devices EVAL-ADAV801 or
  53           EVAL-ADAV803 board connected to one of the Blackfin evaluation boards
  54           like the BF5XX-STAMP or BF5XX-EZKIT.
  55
  56           Note: This driver assumes that the ADAV80X digital record and playback
  57           interfaces are connected to the first SPORT port on the BF5XX board.
  58
  59 config SND_BF5XX_SOC_AD1836
  60         tristate "SoC AD1836 Audio support for BF5xx"
  61         depends on SND_BF5XX_I2S
  62         select SND_BF5XX_SOC_I2S
  63         select SND_SOC_AD1836
  64         help
  65           Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT.
  66
  67 config SND_BF5XX_SOC_AD193X
  68         tristate "SoC AD193X Audio support for Blackfin"
  69         depends on SND_BF5XX_I2S
  70         select SND_BF5XX_SOC_I2S
  71         select SND_SOC_AD193X
  72         help
  73           Say Y if you want to add support for AD193X codec on Blackfin.
  74           This driver supports AD1936, AD1937, AD1938 and AD1939.
  75
  76 config SND_BF5XX_SOC_AD73311
  77         tristate "SoC AD73311 Audio support for Blackfin"
  78         depends on SND_BF5XX_I2S
  79         select SND_BF5XX_SOC_I2S
  80         select SND_SOC_AD73311
  81         help
  82           Say Y if you want to add support for AD73311 codec on Blackfin.
  83
  84 config SND_BFIN_AD73311_SE
  85         int "PF pin for AD73311L Chip Select"
  86         depends on SND_BF5XX_SOC_AD73311
  87         default 4
  88         help
  89           Enter the GPIO used to control AD73311's SE pin. Acceptable
  90           values are 0 to 7
  91
  92 config SND_BF5XX_AC97
  93         tristate "SoC AC97 Audio for the ADI BF5xx chip"
  94         depends on BLACKFIN
  95         select AC97_BUS
  96         select SND_SOC_AC97_BUS
  97         select SND_BF5XX_SOC_SPORT
  98         select SND_BF5XX_SOC_AC97
  99         help
 100           Say Y or M if you want to add support for codecs attached to
 101           the Blackfin SPORT (synchronous serial ports) interface in slot 16
 102           mode (pseudo AC97 interface).
 103           You will also need to select the audio interfaces to support below.
 104
 105           Note:
 106           AC97 codecs which do not implement the slot-16 mode will not function
 107           properly with this driver. This driver is known to work with the
 108           Analog Devices line of AC97 codecs.
 109
 110 config SND_BF5XX_MMAP_SUPPORT
 111         bool "Enable MMAP Support"
 112         depends on SND_BF5XX_AC97
 113         default y
 114         help
 115           Say y if you want AC97 driver to support mmap mode.
 116           We introduce an intermediate buffer to simulate mmap.
 117
 118 config SND_BF5XX_MULTICHAN_SUPPORT
 119         bool "Enable Multichannel Support"
 120         depends on SND_BF5XX_AC97
 121         default n
 122         help
 123           Say y if you want AC97 driver to support up to 5.1 channel audio.
 124           this mode will consume much more memory for DMA.
 125
 126 config SND_BF5XX_HAVE_COLD_RESET
 127         bool "BOARD has COLD Reset GPIO"
 128         depends on SND_BF5XX_AC97
 129         default y if BFIN548_EZKIT
 130         default n if !BFIN548_EZKIT
 131
 132 config SND_BF5XX_RESET_GPIO_NUM
 133         int "Set a GPIO for cold reset"
 134         depends on SND_BF5XX_HAVE_COLD_RESET
 135         range 0 159
 136         default 19 if BFIN548_EZKIT
 137         default 5 if BFIN537_STAMP
 138         default 0
 139         help
 140           Set the correct GPIO for RESET the sound chip.
 141
 142 config SND_BF5XX_SOC_AD1980
 143         tristate "SoC AD1980/1 Audio support for BF5xx (Obsolete)"
 144         depends on SND_BF5XX_AC97
 145         select SND_BF5XX_SOC_AC97
 146         select SND_SOC_AD1980
 147         help
 148           Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT.
 149
 150           Warning:
 151           Because Analog Devices Inc. discontinued the ad1980 sound chip since
 152           Sep. 2009, this ad1980 driver is not maintained, tested and supported
 153           by ADI now.
 154
 155 config SND_BF5XX_SOC_SPORT
 156         tristate
 157
 158 config SND_BF6XX_SOC_SPORT
 159         tristate
 160
 161 config SND_BF5XX_SOC_I2S
 162         tristate
 163
 164 config SND_BF6XX_SOC_I2S
 165         tristate
 166
 167 config SND_BF5XX_SOC_AC97
 168         tristate
 169
 170 config SND_BF5XX_SPORT_NUM
 171         int "Set a SPORT for Sound chip"
 172         depends on (SND_BF5XX_SOC_SPORT || SND_BF6XX_SOC_SPORT)
 173         range 0 3 if BF54x
 174         range 0 1 if !BF54x
 175         default 0
 176         help
 177           Set the correct SPORT for sound chip.