sound/soc/blackfin/Kconfig

   1 config SND_BF5XX_I2S
   2         tristate "SoC I2S Audio for the ADI Blackfin chip"
   3         depends on BLACKFIN
   4         select SND_BF5XX_SOC_SPORT if !BF60x
   5         select SND_BF6XX_SOC_SPORT if BF60x
   6         help
   7           Say Y or M if you want to add support for codecs attached to
   8           the Blackfin SPORT (synchronous serial ports) interface in I2S
   9           mode (supports single stereo In/Out).
  10           You will also need to select the audio interfaces to support below.
  11
  12 config SND_BF5XX_SOC_SSM2602
  13         tristate "SoC SSM2602 Audio Codec Add-On Card support"
  14         depends on SND_BF5XX_I2S && SND_SOC_I2C_AND_SPI
  15         select SND_BF5XX_SOC_I2S if !BF60x
  16         select SND_BF6XX_SOC_I2S if BF60x
  17         select SND_SOC_SSM2602_SPI if SPI_MASTER
  18         select SND_SOC_SSM2602_I2C if I2C
  19         help
  20           Say Y if you want to add support for the Analog Devices
  21           SSM2602 Audio Codec Add-On Card.
  22
  23 config SND_SOC_BFIN_EVAL_ADAU1701
  24         tristate "Support for the EVAL-ADAU1701MINIZ board on Blackfin eval boards"
  25         depends on SND_BF5XX_I2S && I2C
  26         select SND_BF5XX_SOC_I2S
  27         select SND_SOC_ADAU1701
  28         help
  29           Say Y if you want to add support for the Analog Devices EVAL-ADAU1701MINIZ
  30           board connected to one of the Blackfin evaluation boards like the
  31           BF5XX-STAMP or BF5XX-EZKIT.
  32
  33 config SND_SOC_BFIN_EVAL_ADAU1373
  34         tristate "Support for the EVAL-ADAU1373 board on Blackfin eval boards"
  35         depends on SND_BF5XX_I2S && I2C
  36         select SND_BF5XX_SOC_I2S
  37         select SND_SOC_ADAU1373
  38         help
  39           Say Y if you want to add support for the Analog Devices EVAL-ADAU1373
  40           board connected to one of the Blackfin evaluation boards like the
  41           BF5XX-STAMP or BF5XX-EZKIT.
  42
  43           Note: This driver assumes that first ADAU1373 DAI is connected to the
  44           first SPORT port on the BF5XX board.
  45
  46 config SND_SOC_BFIN_EVAL_ADAU1X61
  47         tristate "Support for the EVAL-ADAU1X61 board on Blackfin eval boards"
  48         depends on SND_BF5XX_I2S && I2C
  49         select SND_BF5XX_SOC_I2S
  50         select SND_SOC_ADAU1761_I2C
  51         help
  52           Say Y if you want to add support for the Analog Devices EVAL-ADAU1X61
  53           board connected to one of the Blackfin evaluation boards like the
  54           BF5XX-STAMP or BF5XX-EZKIT.
  55
  56           Note: This driver assumes that the ADAU1X61 is connected to the
  57           first SPORT port on the BF5XX board.
  58
  59 config SND_SOC_BFIN_EVAL_ADAU1X81
  60         tristate "Support for the EVAL-ADAU1X81 boards on Blackfin eval boards"
  61         depends on SND_BF5XX_I2S && I2C
  62         select SND_BF5XX_SOC_I2S
  63         select SND_SOC_ADAU1781_I2C
  64         help
  65           Say Y if you want to add support for the Analog Devices EVAL-ADAU1X81
  66           board connected to one of the Blackfin evaluation boards like the
  67           BF5XX-STAMP or BF5XX-EZKIT.
  68
  69           Note: This driver assumes that the ADAU1X81 is connected to the
  70           first SPORT port on the BF5XX board.
  71
  72 config SND_SOC_BFIN_EVAL_ADAV80X
  73         tristate "Support for the EVAL-ADAV80X boards on Blackfin eval boards"
  74         depends on SND_BF5XX_I2S && SND_SOC_I2C_AND_SPI
  75         select SND_BF5XX_SOC_I2S
  76         select SND_SOC_ADAV801 if SPI_MASTER
  77         select SND_SOC_ADAV803 if I2C
  78         help
  79           Say Y if you want to add support for the Analog Devices EVAL-ADAV801 or
  80           EVAL-ADAV803 board connected to one of the Blackfin evaluation boards
  81           like the BF5XX-STAMP or BF5XX-EZKIT.
  82
  83           Note: This driver assumes that the ADAV80X digital record and playback
  84           interfaces are connected to the first SPORT port on the BF5XX board.
  85
  86 config SND_BF5XX_SOC_AD1836
  87         tristate "SoC AD1836 Audio support for BF5xx"
  88         depends on SND_BF5XX_I2S && SPI_MASTER
  89         select SND_BF5XX_SOC_I2S
  90         select SND_SOC_AD1836
  91         help
  92           Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT.
  93
  94 config SND_BF5XX_SOC_AD193X
  95         tristate "SoC AD193X Audio support for Blackfin"
  96         depends on SND_BF5XX_I2S && SND_SOC_I2C_AND_SPI
  97         select SND_BF5XX_SOC_I2S
  98         select SND_SOC_AD193X_I2C if I2C
  99         select SND_SOC_AD193X_SPI if SPI_MASTER
 100         help
 101           Say Y if you want to add support for AD193X codec on Blackfin.
 102           This driver supports AD1936, AD1937, AD1938 and AD1939.
 103
 104 config SND_BF5XX_SOC_AD73311
 105         tristate "SoC AD73311 Audio support for Blackfin"
 106         depends on SND_BF5XX_I2S
 107         select SND_BF5XX_SOC_I2S
 108         select SND_SOC_AD73311
 109         help
 110           Say Y if you want to add support for AD73311 codec on Blackfin.
 111
 112 config SND_BFIN_AD73311_SE
 113         int "PF pin for AD73311L Chip Select"
 114         depends on SND_BF5XX_SOC_AD73311
 115         default 4
 116         help
 117           Enter the GPIO used to control AD73311's SE pin. Acceptable
 118           values are 0 to 7
 119
 120 config SND_BF5XX_AC97
 121         tristate "SoC AC97 Audio for the ADI BF5xx chip"
 122         depends on BLACKFIN
 123         select AC97_BUS
 124         select SND_SOC_AC97_BUS
 125         select SND_BF5XX_SOC_SPORT
 126         select SND_BF5XX_SOC_AC97
 127         help
 128           Say Y or M if you want to add support for codecs attached to
 129           the Blackfin SPORT (synchronous serial ports) interface in slot 16
 130           mode (pseudo AC97 interface).
 131           You will also need to select the audio interfaces to support below.
 132
 133           Note:
 134           AC97 codecs which do not implement the slot-16 mode will not function
 135           properly with this driver. This driver is known to work with the
 136           Analog Devices line of AC97 codecs.
 137
 138 config SND_BF5XX_MMAP_SUPPORT
 139         bool "Enable MMAP Support"
 140         depends on SND_BF5XX_AC97
 141         default y
 142         help
 143           Say y if you want AC97 driver to support mmap mode.
 144           We introduce an intermediate buffer to simulate mmap.
 145
 146 config SND_BF5XX_MULTICHAN_SUPPORT
 147         bool "Enable Multichannel Support"
 148         depends on SND_BF5XX_AC97
 149         default n
 150         help
 151           Say y if you want AC97 driver to support up to 5.1 channel audio.
 152           this mode will consume much more memory for DMA.
 153
 154 config SND_BF5XX_HAVE_COLD_RESET
 155         bool "BOARD has COLD Reset GPIO"
 156         depends on SND_BF5XX_AC97
 157         default y if BFIN548_EZKIT
 158         default n if !BFIN548_EZKIT
 159
 160 config SND_BF5XX_RESET_GPIO_NUM
 161         int "Set a GPIO for cold reset"
 162         depends on SND_BF5XX_HAVE_COLD_RESET
 163         range 0 159
 164         default 19 if BFIN548_EZKIT
 165         default 5 if BFIN537_STAMP
 166         default 0
 167         help
 168           Set the correct GPIO for RESET the sound chip.
 169
 170 config SND_BF5XX_SOC_AD1980
 171         tristate "SoC AD1980/1 Audio support for BF5xx (Obsolete)"
 172         depends on SND_BF5XX_AC97
 173         select SND_BF5XX_SOC_AC97
 174         select SND_SOC_AD1980
 175         help
 176           Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT.
 177
 178           Warning:
 179           Because Analog Devices Inc. discontinued the ad1980 sound chip since
 180           Sep. 2009, this ad1980 driver is not maintained, tested and supported
 181           by ADI now.
 182
 183 config SND_BF5XX_SOC_SPORT
 184         tristate
 185
 186 config SND_BF6XX_SOC_SPORT
 187         tristate
 188
 189 config SND_BF5XX_SOC_I2S
 190         tristate
 191
 192 config SND_BF6XX_SOC_I2S
 193         tristate
 194
 195 config SND_BF5XX_SOC_AC97
 196         tristate
 197
 198 config SND_BF5XX_SPORT_NUM
 199         int "Set a SPORT for Sound chip"
 200         depends on (SND_BF5XX_SOC_SPORT || SND_BF6XX_SOC_SPORT)
 201         range 0 3 if BF54x
 202         range 0 1 if !BF54x
 203         default 0
 204         help
 205           Set the correct SPORT for sound chip.