sound/soc/codecs/cs4270.c

   1 /*
   2  * CS4270 ALSA SoC (ASoC) codec driver
   3  *
   4  * Author: Timur Tabi <timur@freescale.com>
   5  *
   6  * Copyright 2007-2009 Freescale Semiconductor, Inc.  This file is licensed
   7  * under the terms of the GNU General Public License version 2.  This
   8  * program is licensed "as is" without any warranty of any kind, whether
   9  * express or implied.
  10  *
  11  * This is an ASoC device driver for the Cirrus Logic CS4270 codec.
  12  *
  13  * Current features/limitations:
  14  *
  15  * - Software mode is supported.  Stand-alone mode is not supported.
  16  * - Only I2C is supported, not SPI
  17  * - Support for master and slave mode
  18  * - The machine driver's 'startup' function must call
  19  *   cs4270_set_dai_sysclk() with the value of MCLK.
  20  * - Only I2S and left-justified modes are supported
  21  * - Power management is supported
  22  */
  23
  24 #include <linux/module.h>
  25 #include <linux/slab.h>
  26 #include <sound/core.h>
  27 #include <sound/soc.h>
  28 #include <sound/initval.h>
  29 #include <linux/i2c.h>
  30 #include <linux/delay.h>
  31 #include <linux/regulator/consumer.h>
  32 #include <linux/of_device.h>
  33 #include <linux/of_gpio.h>
  34
  35 /*
  36  * The codec isn't really big-endian or little-endian, since the I2S
  37  * interface requires data to be sent serially with the MSbit first.
  38  * However, to support BE and LE I2S devices, we specify both here.  That
  39  * way, ALSA will always match the bit patterns.
  40  */
  41 #define CS4270_FORMATS (SNDRV_PCM_FMTBIT_S8      | \
  42                         SNDRV_PCM_FMTBIT_S16_LE  | SNDRV_PCM_FMTBIT_S16_BE  | \
  43                         SNDRV_PCM_FMTBIT_S18_3LE | SNDRV_PCM_FMTBIT_S18_3BE | \
  44                         SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S20_3BE | \
  45                         SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S24_3BE | \
  46                         SNDRV_PCM_FMTBIT_S24_LE  | SNDRV_PCM_FMTBIT_S24_BE)
  47
  48 /* CS4270 registers addresses */
  49 #define CS4270_CHIPID   0x01    /* Chip ID */
  50 #define CS4270_PWRCTL   0x02    /* Power Control */
  51 #define CS4270_MODE     0x03    /* Mode Control */
  52 #define CS4270_FORMAT   0x04    /* Serial Format, ADC/DAC Control */
  53 #define CS4270_TRANS    0x05    /* Transition Control */
  54 #define CS4270_MUTE     0x06    /* Mute Control */
  55 #define CS4270_VOLA     0x07    /* DAC Channel A Volume Control */
  56 #define CS4270_VOLB     0x08    /* DAC Channel B Volume Control */
  57
  58 #define CS4270_FIRSTREG 0x01
  59 #define CS4270_LASTREG  0x08
  60 #define CS4270_NUMREGS  (CS4270_LASTREG - CS4270_FIRSTREG + 1)
  61 #define CS4270_I2C_INCR 0x80
  62
  63 /* Bit masks for the CS4270 registers */
  64 #define CS4270_CHIPID_ID        0xF0
  65 #define CS4270_CHIPID_REV       0x0F
  66 #define CS4270_PWRCTL_FREEZE    0x80
  67 #define CS4270_PWRCTL_PDN_ADC   0x20
  68 #define CS4270_PWRCTL_PDN_DAC   0x02
  69 #define CS4270_PWRCTL_PDN       0x01
  70 #define CS4270_PWRCTL_PDN_ALL   \
  71         (CS4270_PWRCTL_PDN_ADC | CS4270_PWRCTL_PDN_DAC | CS4270_PWRCTL_PDN)
  72 #define CS4270_MODE_SPEED_MASK  0x30
  73 #define CS4270_MODE_1X          0x00
  74 #define CS4270_MODE_2X          0x10
  75 #define CS4270_MODE_4X          0x20
  76 #define CS4270_MODE_SLAVE       0x30
  77 #define CS4270_MODE_DIV_MASK    0x0E
  78 #define CS4270_MODE_DIV1        0x00
  79 #define CS4270_MODE_DIV15       0x02
  80 #define CS4270_MODE_DIV2        0x04
  81 #define CS4270_MODE_DIV3        0x06
  82 #define CS4270_MODE_DIV4        0x08
  83 #define CS4270_MODE_POPGUARD    0x01
  84 #define CS4270_FORMAT_FREEZE_A  0x80
  85 #define CS4270_FORMAT_FREEZE_B  0x40
  86 #define CS4270_FORMAT_LOOPBACK  0x20
  87 #define CS4270_FORMAT_DAC_MASK  0x18
  88 #define CS4270_FORMAT_DAC_LJ    0x00
  89 #define CS4270_FORMAT_DAC_I2S   0x08
  90 #define CS4270_FORMAT_DAC_RJ16  0x18
  91 #define CS4270_FORMAT_DAC_RJ24  0x10
  92 #define CS4270_FORMAT_ADC_MASK  0x01
  93 #define CS4270_FORMAT_ADC_LJ    0x00
  94 #define CS4270_FORMAT_ADC_I2S   0x01
  95 #define CS4270_TRANS_ONE_VOL    0x80
  96 #define CS4270_TRANS_SOFT       0x40
  97 #define CS4270_TRANS_ZERO       0x20
  98 #define CS4270_TRANS_INV_ADC_A  0x08
  99 #define CS4270_TRANS_INV_ADC_B  0x10
 100 #define CS4270_TRANS_INV_DAC_A  0x02
 101 #define CS4270_TRANS_INV_DAC_B  0x04
 102 #define CS4270_TRANS_DEEMPH     0x01
 103 #define CS4270_MUTE_AUTO        0x20
 104 #define CS4270_MUTE_ADC_A       0x08
 105 #define CS4270_MUTE_ADC_B       0x10
 106 #define CS4270_MUTE_POLARITY    0x04
 107 #define CS4270_MUTE_DAC_A       0x01
 108 #define CS4270_MUTE_DAC_B       0x02
 109
 110 /* Power-on default values for the registers
 111  *
 112  * This array contains the power-on default values of the registers, with the
 113  * exception of the "CHIPID" register (01h).  The lower four bits of that
 114  * register contain the hardware revision, so it is treated as volatile.
 115  */
 116 static const struct reg_default cs4270_reg_defaults[] = {
 117         { 2, 0x00 },
 118         { 3, 0x30 },
 119         { 4, 0x00 },
 120         { 5, 0x60 },
 121         { 6, 0x20 },
 122         { 7, 0x00 },
 123         { 8, 0x00 },
 124 };
 125
 126 static const char *supply_names[] = {
 127         "va", "vd", "vlc"
 128 };
 129
 130 /* Private data for the CS4270 */
 131 struct cs4270_private {
 132         struct regmap *regmap;
 133         unsigned int mclk; /* Input frequency of the MCLK pin */
 134         unsigned int mode; /* The mode (I2S or left-justified) */
 135         unsigned int slave_mode;
 136         unsigned int manual_mute;
 137
 138         /* power domain regulators */
 139         struct regulator_bulk_data supplies[ARRAY_SIZE(supply_names)];
 140 };
 141
 142 static const struct snd_soc_dapm_widget cs4270_dapm_widgets[] = {
 143 SND_SOC_DAPM_INPUT("AINL"),
 144 SND_SOC_DAPM_INPUT("AINR"),
 145
 146 SND_SOC_DAPM_OUTPUT("AOUTL"),
 147 SND_SOC_DAPM_OUTPUT("AOUTR"),
 148 };
 149
 150 static const struct snd_soc_dapm_route cs4270_dapm_routes[] = {
 151         { "Capture", NULL, "AINA" },
 152         { "Capture", NULL, "AINB" },
 153
 154         { "AOUTA", NULL, "Playback" },
 155         { "AOUTB", NULL, "Playback" },
 156 };
 157
 158 /**
 159  * struct cs4270_mode_ratios - clock ratio tables
 160  * @ratio: the ratio of MCLK to the sample rate
 161  * @speed_mode: the Speed Mode bits to set in the Mode Control register for
 162  *              this ratio
 163  * @mclk: the Ratio Select bits to set in the Mode Control register for this
 164  *        ratio
 165  *
 166  * The data for this chart is taken from Table 5 of the CS4270 reference
 167  * manual.
 168  *
 169  * This table is used to determine how to program the Mode Control register.
 170  * It is also used by cs4270_set_dai_sysclk() to tell ALSA which sampling
 171  * rates the CS4270 currently supports.
 172  *
 173  * @speed_mode is the corresponding bit pattern to be written to the
 174  * MODE bits of the Mode Control Register
 175  *
 176  * @mclk is the corresponding bit pattern to be wirten to the MCLK bits of
 177  * the Mode Control Register.
 178  *
 179  * In situations where a single ratio is represented by multiple speed
 180  * modes, we favor the slowest speed.  E.g, for a ratio of 128, we pick
 181  * double-speed instead of quad-speed.  However, the CS4270 errata states
 182  * that divide-By-1.5 can cause failures, so we avoid that mode where
 183  * possible.
 184  *
 185  * Errata: There is an errata for the CS4270 where divide-by-1.5 does not
 186  * work if Vd is 3.3V.  If this effects you, select the
 187  * CONFIG_SND_SOC_CS4270_VD33_ERRATA Kconfig option, and the driver will
 188  * never select any sample rates that require divide-by-1.5.
 189  */
 190 struct cs4270_mode_ratios {
 191         unsigned int ratio;
 192         u8 speed_mode;
 193         u8 mclk;
 194 };
 195
 196 static struct cs4270_mode_ratios cs4270_mode_ratios[] = {
 197         {64, CS4270_MODE_4X, CS4270_MODE_DIV1},
 198 #ifndef CONFIG_SND_SOC_CS4270_VD33_ERRATA
 199         {96, CS4270_MODE_4X, CS4270_MODE_DIV15},
 200 #endif
 201         {128, CS4270_MODE_2X, CS4270_MODE_DIV1},
 202         {192, CS4270_MODE_4X, CS4270_MODE_DIV3},
 203         {256, CS4270_MODE_1X, CS4270_MODE_DIV1},
 204         {384, CS4270_MODE_2X, CS4270_MODE_DIV3},
 205         {512, CS4270_MODE_1X, CS4270_MODE_DIV2},
 206         {768, CS4270_MODE_1X, CS4270_MODE_DIV3},
 207         {1024, CS4270_MODE_1X, CS4270_MODE_DIV4}
 208 };
 209
 210 /* The number of MCLK/LRCK ratios supported by the CS4270 */
 211 #define NUM_MCLK_RATIOS         ARRAY_SIZE(cs4270_mode_ratios)
 212
 213 static bool cs4270_reg_is_readable(struct device *dev, unsigned int reg)
 214 {
 215         return (reg >= CS4270_FIRSTREG) && (reg <= CS4270_LASTREG);
 216 }
 217
 218 static bool cs4270_reg_is_volatile(struct device *dev, unsigned int reg)
 219 {
 220         /* Unreadable registers are considered volatile */
 221         if ((reg < CS4270_FIRSTREG) || (reg > CS4270_LASTREG))
 222                 return 1;
 223
 224         return reg == CS4270_CHIPID;
 225 }
 226
 227 /**
 228  * cs4270_set_dai_sysclk - determine the CS4270 samples rates.
 229  * @codec_dai: the codec DAI
 230  * @clk_id: the clock ID (ignored)
 231  * @freq: the MCLK input frequency
 232  * @dir: the clock direction (ignored)
 233  *
 234  * This function is used to tell the codec driver what the input MCLK
 235  * frequency is.
 236  *
 237  * The value of MCLK is used to determine which sample rates are supported
 238  * by the CS4270.  The ratio of MCLK / Fs must be equal to one of nine
 239  * supported values - 64, 96, 128, 192, 256, 384, 512, 768, and 1024.
 240  *
 241  * This function calculates the nine ratios and determines which ones match
 242  * a standard sample rate.  If there's a match, then it is added to the list
 243  * of supported sample rates.
 244  *
 245  * This function must be called by the machine driver's 'startup' function,
 246  * otherwise the list of supported sample rates will not be available in
 247  * time for ALSA.
 248  *
 249  * For setups with variable MCLKs, pass 0 as 'freq' argument. This will cause
 250  * theoretically possible sample rates to be enabled. Call it again with a
 251  * proper value set one the external clock is set (most probably you would do
 252  * that from a machine's driver 'hw_param' hook.
 253  */
 254 static int cs4270_set_dai_sysclk(struct snd_soc_dai *codec_dai,
 255                                  int clk_id, unsigned int freq, int dir)
 256 {
 257         struct snd_soc_codec *codec = codec_dai->codec;
 258         struct cs4270_private *cs4270 = snd_soc_codec_get_drvdata(codec);
 259
 260         cs4270->mclk = freq;
 261         return 0;
 262 }
 263
 264 /**
 265  * cs4270_set_dai_fmt - configure the codec for the selected audio format
 266  * @codec_dai: the codec DAI
 267  * @format: a SND_SOC_DAIFMT_x value indicating the data format
 268  *
 269  * This function takes a bitmask of SND_SOC_DAIFMT_x bits and programs the
 270  * codec accordingly.
 271  *
 272  * Currently, this function only supports SND_SOC_DAIFMT_I2S and
 273  * SND_SOC_DAIFMT_LEFT_J.  The CS4270 codec also supports right-justified
 274  * data for playback only, but ASoC currently does not support different
 275  * formats for playback vs. record.
 276  */
 277 static int cs4270_set_dai_fmt(struct snd_soc_dai *codec_dai,
 278                               unsigned int format)
 279 {
 280         struct snd_soc_codec *codec = codec_dai->codec;
 281         struct cs4270_private *cs4270 = snd_soc_codec_get_drvdata(codec);
 282
 283         /* set DAI format */
 284         switch (format & SND_SOC_DAIFMT_FORMAT_MASK) {
 285         case SND_SOC_DAIFMT_I2S:
 286         case SND_SOC_DAIFMT_LEFT_J:
 287                 cs4270->mode = format & SND_SOC_DAIFMT_FORMAT_MASK;
 288                 break;
 289         default:
 290                 dev_err(codec->dev, "invalid dai format\n");
 291                 return -EINVAL;
 292         }
 293
 294         /* set master/slave audio interface */
 295         switch (format & SND_SOC_DAIFMT_MASTER_MASK) {
 296         case SND_SOC_DAIFMT_CBS_CFS:
 297                 cs4270->slave_mode = 1;
 298                 break;
 299         case SND_SOC_DAIFMT_CBM_CFM:
 300                 cs4270->slave_mode = 0;
 301                 break;
 302         default:
 303                 /* all other modes are unsupported by the hardware */
 304                 dev_err(codec->dev, "Unknown master/slave configuration\n");
 305                 return -EINVAL;
 306         }
 307
 308         return 0;
 309 }
 310
 311 /**
 312  * cs4270_hw_params - program the CS4270 with the given hardware parameters.
 313  * @substream: the audio stream
 314  * @params: the hardware parameters to set
 315  * @dai: the SOC DAI (ignored)
 316  *
 317  * This function programs the hardware with the values provided.
 318  * Specifically, the sample rate and the data format.
 319  *
 320  * The .ops functions are used to provide board-specific data, like input
 321  * frequencies, to this driver.  This function takes that information,
 322  * combines it with the hardware parameters provided, and programs the
 323  * hardware accordingly.
 324  */
 325 static int cs4270_hw_params(struct snd_pcm_substream *substream,
 326                             struct snd_pcm_hw_params *params,
 327                             struct snd_soc_dai *dai)
 328 {
 329         struct snd_soc_codec *codec = dai->codec;
 330         struct cs4270_private *cs4270 = snd_soc_codec_get_drvdata(codec);
 331         int ret;
 332         unsigned int i;
 333         unsigned int rate;
 334         unsigned int ratio;
 335         int reg;
 336
 337         /* Figure out which MCLK/LRCK ratio to use */
 338
 339         rate = params_rate(params);     /* Sampling rate, in Hz */
 340         ratio = cs4270->mclk / rate;    /* MCLK/LRCK ratio */
 341
 342         for (i = 0; i < NUM_MCLK_RATIOS; i++) {
 343                 if (cs4270_mode_ratios[i].ratio == ratio)
 344                         break;
 345         }
 346
 347         if (i == NUM_MCLK_RATIOS) {
 348                 /* We did not find a matching ratio */
 349                 dev_err(codec->dev, "could not find matching ratio\n");
 350                 return -EINVAL;
 351         }
 352
 353         /* Set the sample rate */
 354
 355         reg = snd_soc_read(codec, CS4270_MODE);
 356         reg &= ~(CS4270_MODE_SPEED_MASK | CS4270_MODE_DIV_MASK);
 357         reg |= cs4270_mode_ratios[i].mclk;
 358
 359         if (cs4270->slave_mode)
 360                 reg |= CS4270_MODE_SLAVE;
 361         else
 362                 reg |= cs4270_mode_ratios[i].speed_mode;
 363
 364         ret = snd_soc_write(codec, CS4270_MODE, reg);
 365         if (ret < 0) {
 366                 dev_err(codec->dev, "i2c write failed\n");
 367                 return ret;
 368         }
 369
 370         /* Set the DAI format */
 371
 372         reg = snd_soc_read(codec, CS4270_FORMAT);
 373         reg &= ~(CS4270_FORMAT_DAC_MASK | CS4270_FORMAT_ADC_MASK);
 374
 375         switch (cs4270->mode) {
 376         case SND_SOC_DAIFMT_I2S:
 377                 reg |= CS4270_FORMAT_DAC_I2S | CS4270_FORMAT_ADC_I2S;
 378                 break;
 379         case SND_SOC_DAIFMT_LEFT_J:
 380                 reg |= CS4270_FORMAT_DAC_LJ | CS4270_FORMAT_ADC_LJ;
 381                 break;
 382         default:
 383                 dev_err(codec->dev, "unknown dai format\n");
 384                 return -EINVAL;
 385         }
 386
 387         ret = snd_soc_write(codec, CS4270_FORMAT, reg);
 388         if (ret < 0) {
 389                 dev_err(codec->dev, "i2c write failed\n");
 390                 return ret;
 391         }
 392
 393         return ret;
 394 }
 395
 396 /**
 397  * cs4270_dai_mute - enable/disable the CS4270 external mute
 398  * @dai: the SOC DAI
 399  * @mute: 0 = disable mute, 1 = enable mute
 400  *
 401  * This function toggles the mute bits in the MUTE register.  The CS4270's
 402  * mute capability is intended for external muting circuitry, so if the
 403  * board does not have the MUTEA or MUTEB pins connected to such circuitry,
 404  * then this function will do nothing.
 405  */
 406 static int cs4270_dai_mute(struct snd_soc_dai *dai, int mute)
 407 {
 408         struct snd_soc_codec *codec = dai->codec;
 409         struct cs4270_private *cs4270 = snd_soc_codec_get_drvdata(codec);
 410         int reg6;
 411
 412         reg6 = snd_soc_read(codec, CS4270_MUTE);
 413
 414         if (mute)
 415                 reg6 |= CS4270_MUTE_DAC_A | CS4270_MUTE_DAC_B;
 416         else {
 417                 reg6 &= ~(CS4270_MUTE_DAC_A | CS4270_MUTE_DAC_B);
 418                 reg6 |= cs4270->manual_mute;
 419         }
 420
 421         return snd_soc_write(codec, CS4270_MUTE, reg6);
 422 }
 423
 424 /**
 425  * cs4270_soc_put_mute - put callback for the 'Master Playback switch'
 426  *                       alsa control.
 427  * @kcontrol: mixer control
 428  * @ucontrol: control element information
 429  *
 430  * This function basically passes the arguments on to the generic
 431  * snd_soc_put_volsw() function and saves the mute information in
 432  * our private data structure. This is because we want to prevent
 433  * cs4270_dai_mute() neglecting the user's decision to manually
 434  * mute the codec's output.
 435  *
 436  * Returns 0 for success.
 437  */
 438 static int cs4270_soc_put_mute(struct snd_kcontrol *kcontrol,
 439                                 struct snd_ctl_elem_value *ucontrol)
 440 {
 441         struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol);
 442         struct cs4270_private *cs4270 = snd_soc_codec_get_drvdata(codec);
 443         int left = !ucontrol->value.integer.value[0];
 444         int right = !ucontrol->value.integer.value[1];
 445
 446         cs4270->manual_mute = (left ? CS4270_MUTE_DAC_A : 0) |
 447                               (right ? CS4270_MUTE_DAC_B : 0);
 448
 449         return snd_soc_put_volsw(kcontrol, ucontrol);
 450 }
 451
 452 /* A list of non-DAPM controls that the CS4270 supports */
 453 static const struct snd_kcontrol_new cs4270_snd_controls[] = {
 454         SOC_DOUBLE_R("Master Playback Volume",
 455                 CS4270_VOLA, CS4270_VOLB, 0, 0xFF, 1),
 456         SOC_SINGLE("Digital Sidetone Switch", CS4270_FORMAT, 5, 1, 0),
 457         SOC_SINGLE("Soft Ramp Switch", CS4270_TRANS, 6, 1, 0),
 458         SOC_SINGLE("Zero Cross Switch", CS4270_TRANS, 5, 1, 0),
 459         SOC_SINGLE("De-emphasis filter", CS4270_TRANS, 0, 1, 0),
 460         SOC_SINGLE("Popguard Switch", CS4270_MODE, 0, 1, 1),
 461         SOC_SINGLE("Auto-Mute Switch", CS4270_MUTE, 5, 1, 0),
 462         SOC_DOUBLE("Master Capture Switch", CS4270_MUTE, 3, 4, 1, 1),
 463         SOC_DOUBLE_EXT("Master Playback Switch", CS4270_MUTE, 0, 1, 1, 1,
 464                 snd_soc_get_volsw, cs4270_soc_put_mute),
 465 };
 466
 467 static const struct snd_soc_dai_ops cs4270_dai_ops = {
 468         .hw_params      = cs4270_hw_params,
 469         .set_sysclk     = cs4270_set_dai_sysclk,
 470         .set_fmt        = cs4270_set_dai_fmt,
 471         .digital_mute   = cs4270_dai_mute,
 472 };
 473
 474 static struct snd_soc_dai_driver cs4270_dai = {
 475         .name = "cs4270-hifi",
 476         .playback = {
 477                 .stream_name = "Playback",
 478                 .channels_min = 2,
 479                 .channels_max = 2,
 480                 .rates = SNDRV_PCM_RATE_CONTINUOUS,
 481                 .rate_min = 4000,
 482                 .rate_max = 216000,
 483                 .formats = CS4270_FORMATS,
 484         },
 485         .capture = {
 486                 .stream_name = "Capture",
 487                 .channels_min = 2,
 488                 .channels_max = 2,
 489                 .rates = SNDRV_PCM_RATE_CONTINUOUS,
 490                 .rate_min = 4000,
 491                 .rate_max = 216000,
 492                 .formats = CS4270_FORMATS,
 493         },
 494         .ops = &cs4270_dai_ops,
 495 };
 496
 497 /**
 498  * cs4270_probe - ASoC probe function
 499  * @pdev: platform device
 500  *
 501  * This function is called when ASoC has all the pieces it needs to
 502  * instantiate a sound driver.
 503  */
 504 static int cs4270_probe(struct snd_soc_codec *codec)
 505 {
 506         struct cs4270_private *cs4270 = snd_soc_codec_get_drvdata(codec);
 507         int ret;
 508
 509         /* Disable auto-mute.  This feature appears to be buggy.  In some
 510          * situations, auto-mute will not deactivate when it should, so we want
 511          * this feature disabled by default.  An application (e.g. alsactl) can
 512          * re-enabled it by using the controls.
 513          */
 514         ret = snd_soc_update_bits(codec, CS4270_MUTE, CS4270_MUTE_AUTO, 0);
 515         if (ret < 0) {
 516                 dev_err(codec->dev, "i2c write failed\n");
 517                 return ret;
 518         }
 519
 520         /* Disable automatic volume control.  The hardware enables, and it
 521          * causes volume change commands to be delayed, sometimes until after
 522          * playback has started.  An application (e.g. alsactl) can
 523          * re-enabled it by using the controls.
 524          */
 525         ret = snd_soc_update_bits(codec, CS4270_TRANS,
 526                 CS4270_TRANS_SOFT | CS4270_TRANS_ZERO, 0);
 527         if (ret < 0) {
 528                 dev_err(codec->dev, "i2c write failed\n");
 529                 return ret;
 530         }
 531
 532         ret = regulator_bulk_enable(ARRAY_SIZE(cs4270->supplies),
 533                                     cs4270->supplies);
 534
 535         return ret;
 536 }
 537
 538 /**
 539  * cs4270_remove - ASoC remove function
 540  * @pdev: platform device
 541  *
 542  * This function is the counterpart to cs4270_probe().
 543  */
 544 static int cs4270_remove(struct snd_soc_codec *codec)
 545 {
 546         struct cs4270_private *cs4270 = snd_soc_codec_get_drvdata(codec);
 547
 548         regulator_bulk_disable(ARRAY_SIZE(cs4270->supplies), cs4270->supplies);
 549
 550         return 0;
 551 };
 552
 553 #ifdef CONFIG_PM
 554
 555 /* This suspend/resume implementation can handle both - a simple standby
 556  * where the codec remains powered, and a full suspend, where the voltage
 557  * domain the codec is connected to is teared down and/or any other hardware
 558  * reset condition is asserted.
 559  *
 560  * The codec's own power saving features are enabled in the suspend callback,
 561  * and all registers are written back to the hardware when resuming.
 562  */
 563
 564 static int cs4270_soc_suspend(struct snd_soc_codec *codec)
 565 {
 566         struct cs4270_private *cs4270 = snd_soc_codec_get_drvdata(codec);
 567         int reg, ret;
 568
 569         reg = snd_soc_read(codec, CS4270_PWRCTL) | CS4270_PWRCTL_PDN_ALL;
 570         if (reg < 0)
 571                 return reg;
 572
 573         ret = snd_soc_write(codec, CS4270_PWRCTL, reg);
 574         if (ret < 0)
 575                 return ret;
 576
 577         regulator_bulk_disable(ARRAY_SIZE(cs4270->supplies),
 578                                cs4270->supplies);
 579
 580         return 0;
 581 }
 582
 583 static int cs4270_soc_resume(struct snd_soc_codec *codec)
 584 {
 585         struct cs4270_private *cs4270 = snd_soc_codec_get_drvdata(codec);
 586         int reg, ret;
 587
 588         ret = regulator_bulk_enable(ARRAY_SIZE(cs4270->supplies),
 589                                     cs4270->supplies);
 590         if (ret != 0)
 591                 return ret;
 592
 593         /* In case the device was put to hard reset during sleep, we need to
 594          * wait 500ns here before any I2C communication. */
 595         ndelay(500);
 596
 597         /* first restore the entire register cache ... */
 598         regcache_sync(cs4270->regmap);
 599
 600         /* ... then disable the power-down bits */
 601         reg = snd_soc_read(codec, CS4270_PWRCTL);
 602         reg &= ~CS4270_PWRCTL_PDN_ALL;
 603
 604         return snd_soc_write(codec, CS4270_PWRCTL, reg);
 605 }
 606 #else
 607 #define cs4270_soc_suspend      NULL
 608 #define cs4270_soc_resume       NULL
 609 #endif /* CONFIG_PM */
 610
 611 /*
 612  * ASoC codec driver structure
 613  */
 614 static const struct snd_soc_codec_driver soc_codec_device_cs4270 = {
 615         .probe =                cs4270_probe,
 616         .remove =               cs4270_remove,
 617         .suspend =              cs4270_soc_suspend,
 618         .resume =               cs4270_soc_resume,
 619
 620         .component_driver = {
 621                 .controls =             cs4270_snd_controls,
 622                 .num_controls =         ARRAY_SIZE(cs4270_snd_controls),
 623                 .dapm_widgets =         cs4270_dapm_widgets,
 624                 .num_dapm_widgets =     ARRAY_SIZE(cs4270_dapm_widgets),
 625                 .dapm_routes =          cs4270_dapm_routes,
 626                 .num_dapm_routes =      ARRAY_SIZE(cs4270_dapm_routes),
 627         },
 628 };
 629
 630 /*
 631  * cs4270_of_match - the device tree bindings
 632  */
 633 static const struct of_device_id cs4270_of_match[] = {
 634         { .compatible = "cirrus,cs4270", },
 635         { }
 636 };
 637 MODULE_DEVICE_TABLE(of, cs4270_of_match);
 638
 639 static const struct regmap_config cs4270_regmap = {
 640         .reg_bits =             8,
 641         .val_bits =             8,
 642         .max_register =         CS4270_LASTREG,
 643         .reg_defaults =         cs4270_reg_defaults,
 644         .num_reg_defaults =     ARRAY_SIZE(cs4270_reg_defaults),
 645         .cache_type =           REGCACHE_RBTREE,
 646
 647         .readable_reg =         cs4270_reg_is_readable,
 648         .volatile_reg =         cs4270_reg_is_volatile,
 649 };
 650
 651 /**
 652  * cs4270_i2c_probe - initialize the I2C interface of the CS4270
 653  * @i2c_client: the I2C client object
 654  * @id: the I2C device ID (ignored)
 655  *
 656  * This function is called whenever the I2C subsystem finds a device that
 657  * matches the device ID given via a prior call to i2c_add_driver().
 658  */
 659 static int cs4270_i2c_probe(struct i2c_client *i2c_client,
 660         const struct i2c_device_id *id)
 661 {
 662         struct device_node *np = i2c_client->dev.of_node;
 663         struct cs4270_private *cs4270;
 664         unsigned int val;
 665         int ret, i;
 666
 667         cs4270 = devm_kzalloc(&i2c_client->dev, sizeof(struct cs4270_private),
 668                               GFP_KERNEL);
 669         if (!cs4270)
 670                 return -ENOMEM;
 671
 672         /* get the power supply regulators */
 673         for (i = 0; i < ARRAY_SIZE(supply_names); i++)
 674                 cs4270->supplies[i].supply = supply_names[i];
 675
 676         ret = devm_regulator_bulk_get(&i2c_client->dev,
 677                                       ARRAY_SIZE(cs4270->supplies),
 678                                       cs4270->supplies);
 679         if (ret < 0)
 680                 return ret;
 681
 682         /* See if we have a way to bring the codec out of reset */
 683         if (np) {
 684                 enum of_gpio_flags flags;
 685                 int gpio = of_get_named_gpio_flags(np, "reset-gpio", 0, &flags);
 686
 687                 if (gpio_is_valid(gpio)) {
 688                         ret = devm_gpio_request_one(&i2c_client->dev, gpio,
 689                                      flags & OF_GPIO_ACTIVE_LOW ?
 690                                         GPIOF_OUT_INIT_LOW : GPIOF_OUT_INIT_HIGH,
 691                                      "cs4270 reset");
 692                         if (ret < 0)
 693                                 return ret;
 694                 }
 695         }
 696
 697         cs4270->regmap = devm_regmap_init_i2c(i2c_client, &cs4270_regmap);
 698         if (IS_ERR(cs4270->regmap))
 699                 return PTR_ERR(cs4270->regmap);
 700
 701         /* Verify that we have a CS4270 */
 702         ret = regmap_read(cs4270->regmap, CS4270_CHIPID, &val);
 703         if (ret < 0) {
 704                 dev_err(&i2c_client->dev, "failed to read i2c at addr %X\n",
 705                        i2c_client->addr);
 706                 return ret;
 707         }
 708         /* The top four bits of the chip ID should be 1100. */
 709         if ((val & 0xF0) != 0xC0) {
 710                 dev_err(&i2c_client->dev, "device at addr %X is not a CS4270\n",
 711                        i2c_client->addr);
 712                 return -ENODEV;
 713         }
 714
 715         dev_info(&i2c_client->dev, "found device at i2c address %X\n",
 716                 i2c_client->addr);
 717         dev_info(&i2c_client->dev, "hardware revision %X\n", val & 0xF);
 718
 719         i2c_set_clientdata(i2c_client, cs4270);
 720
 721         ret = snd_soc_register_codec(&i2c_client->dev,
 722                         &soc_codec_device_cs4270, &cs4270_dai, 1);
 723         return ret;
 724 }
 725
 726 /**
 727  * cs4270_i2c_remove - remove an I2C device
 728  * @i2c_client: the I2C client object
 729  *
 730  * This function is the counterpart to cs4270_i2c_probe().
 731  */
 732 static int cs4270_i2c_remove(struct i2c_client *i2c_client)
 733 {
 734         snd_soc_unregister_codec(&i2c_client->dev);
 735         return 0;
 736 }
 737
 738 /*
 739  * cs4270_id - I2C device IDs supported by this driver
 740  */
 741 static const struct i2c_device_id cs4270_id[] = {
 742         {"cs4270", 0},
 743         {}
 744 };
 745 MODULE_DEVICE_TABLE(i2c, cs4270_id);
 746
 747 /*
 748  * cs4270_i2c_driver - I2C device identification
 749  *
 750  * This structure tells the I2C subsystem how to identify and support a
 751  * given I2C device type.
 752  */
 753 static struct i2c_driver cs4270_i2c_driver = {
 754         .driver = {
 755                 .name = "cs4270",
 756                 .of_match_table = cs4270_of_match,
 757         },
 758         .id_table = cs4270_id,
 759         .probe = cs4270_i2c_probe,
 760         .remove = cs4270_i2c_remove,
 761 };
 762
 763 module_i2c_driver(cs4270_i2c_driver);
 764
 765 MODULE_AUTHOR("Timur Tabi <timur@freescale.com>");
 766 MODULE_DESCRIPTION("Cirrus Logic CS4270 ALSA SoC Codec Driver");
 767 MODULE_LICENSE("GPL");