2 * wm8961.c -- WM8961 ALSA SoC Audio driver
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
10 * Currently unimplemented features:
14 #include <linux/module.h>
15 #include <linux/moduleparam.h>
16 #include <linux/init.h>
17 #include <linux/delay.h>
19 #include <linux/i2c.h>
20 #include <linux/platform_device.h>
21 #include <linux/slab.h>
22 #include <sound/core.h>
23 #include <sound/pcm.h>
24 #include <sound/pcm_params.h>
25 #include <sound/soc.h>
26 #include <sound/initval.h>
27 #include <sound/tlv.h>
31 #define WM8961_MAX_REGISTER 0xFC
33 static u16 wm8961_reg_defaults
[] = {
34 0x009F, /* R0 - Left Input volume */
35 0x009F, /* R1 - Right Input volume */
36 0x0000, /* R2 - LOUT1 volume */
37 0x0000, /* R3 - ROUT1 volume */
38 0x0020, /* R4 - Clocking1 */
39 0x0008, /* R5 - ADC & DAC Control 1 */
40 0x0000, /* R6 - ADC & DAC Control 2 */
41 0x000A, /* R7 - Audio Interface 0 */
42 0x01F4, /* R8 - Clocking2 */
43 0x0000, /* R9 - Audio Interface 1 */
44 0x00FF, /* R10 - Left DAC volume */
45 0x00FF, /* R11 - Right DAC volume */
48 0x0040, /* R14 - Audio Interface 2 */
49 0x0000, /* R15 - Software Reset */
51 0x007B, /* R17 - ALC1 */
52 0x0000, /* R18 - ALC2 */
53 0x0032, /* R19 - ALC3 */
54 0x0000, /* R20 - Noise Gate */
55 0x00C0, /* R21 - Left ADC volume */
56 0x00C0, /* R22 - Right ADC volume */
57 0x0120, /* R23 - Additional control(1) */
58 0x0000, /* R24 - Additional control(2) */
59 0x0000, /* R25 - Pwr Mgmt (1) */
60 0x0000, /* R26 - Pwr Mgmt (2) */
61 0x0000, /* R27 - Additional Control (3) */
62 0x0000, /* R28 - Anti-pop */
64 0x005F, /* R30 - Clocking 3 */
66 0x0000, /* R32 - ADCL signal path */
67 0x0000, /* R33 - ADCR signal path */
74 0x0000, /* R40 - LOUT2 volume */
75 0x0000, /* R41 - ROUT2 volume */
81 0x0000, /* R47 - Pwr Mgmt (3) */
82 0x0023, /* R48 - Additional Control (4) */
83 0x0000, /* R49 - Class D Control 1 */
85 0x0003, /* R51 - Class D Control 2 */
90 0x0106, /* R56 - Clocking 4 */
91 0x0000, /* R57 - DSP Sidetone 0 */
92 0x0000, /* R58 - DSP Sidetone 1 */
94 0x0000, /* R60 - DC Servo 0 */
95 0x0000, /* R61 - DC Servo 1 */
97 0x015E, /* R63 - DC Servo 3 */
99 0x0010, /* R65 - DC Servo 5 */
102 0x0003, /* R68 - Analogue PGA Bias */
103 0x0000, /* R69 - Analogue HP 0 */
105 0x01FB, /* R71 - Analogue HP 2 */
106 0x0000, /* R72 - Charge Pump 1 */
116 0x0000, /* R82 - Charge Pump B */
121 0x0000, /* R87 - Write Sequencer 1 */
122 0x0000, /* R88 - Write Sequencer 2 */
123 0x0000, /* R89 - Write Sequencer 3 */
124 0x0000, /* R90 - Write Sequencer 4 */
125 0x0000, /* R91 - Write Sequencer 5 */
126 0x0000, /* R92 - Write Sequencer 6 */
127 0x0000, /* R93 - Write Sequencer 7 */
286 0x0001, /* R252 - General test 1 */
290 enum snd_soc_control_type control_type
;
294 static int wm8961_volatile_register(struct snd_soc_codec
*codec
, unsigned int reg
)
297 case WM8961_SOFTWARE_RESET
:
298 case WM8961_WRITE_SEQUENCER_7
:
299 case WM8961_DC_SERVO_1
:
307 static int wm8961_reset(struct snd_soc_codec
*codec
)
309 return snd_soc_write(codec
, WM8961_SOFTWARE_RESET
, 0);
313 * The headphone output supports special anti-pop sequences giving
314 * silent power up and power down.
316 static int wm8961_hp_event(struct snd_soc_dapm_widget
*w
,
317 struct snd_kcontrol
*kcontrol
, int event
)
319 struct snd_soc_codec
*codec
= w
->codec
;
320 u16 hp_reg
= snd_soc_read(codec
, WM8961_ANALOGUE_HP_0
);
321 u16 cp_reg
= snd_soc_read(codec
, WM8961_CHARGE_PUMP_1
);
322 u16 pwr_reg
= snd_soc_read(codec
, WM8961_PWR_MGMT_2
);
323 u16 dcs_reg
= snd_soc_read(codec
, WM8961_DC_SERVO_1
);
326 if (event
& SND_SOC_DAPM_POST_PMU
) {
327 /* Make sure the output is shorted */
328 hp_reg
&= ~(WM8961_HPR_RMV_SHORT
| WM8961_HPL_RMV_SHORT
);
329 snd_soc_write(codec
, WM8961_ANALOGUE_HP_0
, hp_reg
);
331 /* Enable the charge pump */
332 cp_reg
|= WM8961_CP_ENA
;
333 snd_soc_write(codec
, WM8961_CHARGE_PUMP_1
, cp_reg
);
337 pwr_reg
|= WM8961_LOUT1_PGA
| WM8961_ROUT1_PGA
;
338 snd_soc_write(codec
, WM8961_PWR_MGMT_2
, pwr_reg
);
340 /* Enable the amplifier */
341 hp_reg
|= WM8961_HPR_ENA
| WM8961_HPL_ENA
;
342 snd_soc_write(codec
, WM8961_ANALOGUE_HP_0
, hp_reg
);
344 /* Second stage enable */
345 hp_reg
|= WM8961_HPR_ENA_DLY
| WM8961_HPL_ENA_DLY
;
346 snd_soc_write(codec
, WM8961_ANALOGUE_HP_0
, hp_reg
);
348 /* Enable the DC servo & trigger startup */
350 WM8961_DCS_ENA_CHAN_HPR
| WM8961_DCS_TRIG_STARTUP_HPR
|
351 WM8961_DCS_ENA_CHAN_HPL
| WM8961_DCS_TRIG_STARTUP_HPL
;
352 dev_dbg(codec
->dev
, "Enabling DC servo\n");
354 snd_soc_write(codec
, WM8961_DC_SERVO_1
, dcs_reg
);
357 dcs_reg
= snd_soc_read(codec
, WM8961_DC_SERVO_1
);
358 } while (--timeout
&&
359 dcs_reg
& (WM8961_DCS_TRIG_STARTUP_HPR
|
360 WM8961_DCS_TRIG_STARTUP_HPL
));
361 if (dcs_reg
& (WM8961_DCS_TRIG_STARTUP_HPR
|
362 WM8961_DCS_TRIG_STARTUP_HPL
))
363 dev_err(codec
->dev
, "DC servo timed out\n");
365 dev_dbg(codec
->dev
, "DC servo startup complete\n");
367 /* Enable the output stage */
368 hp_reg
|= WM8961_HPR_ENA_OUTP
| WM8961_HPL_ENA_OUTP
;
369 snd_soc_write(codec
, WM8961_ANALOGUE_HP_0
, hp_reg
);
371 /* Remove the short on the output stage */
372 hp_reg
|= WM8961_HPR_RMV_SHORT
| WM8961_HPL_RMV_SHORT
;
373 snd_soc_write(codec
, WM8961_ANALOGUE_HP_0
, hp_reg
);
376 if (event
& SND_SOC_DAPM_PRE_PMD
) {
377 /* Short the output */
378 hp_reg
&= ~(WM8961_HPR_RMV_SHORT
| WM8961_HPL_RMV_SHORT
);
379 snd_soc_write(codec
, WM8961_ANALOGUE_HP_0
, hp_reg
);
381 /* Disable the output stage */
382 hp_reg
&= ~(WM8961_HPR_ENA_OUTP
| WM8961_HPL_ENA_OUTP
);
383 snd_soc_write(codec
, WM8961_ANALOGUE_HP_0
, hp_reg
);
385 /* Disable DC offset cancellation */
386 dcs_reg
&= ~(WM8961_DCS_ENA_CHAN_HPR
|
387 WM8961_DCS_ENA_CHAN_HPL
);
388 snd_soc_write(codec
, WM8961_DC_SERVO_1
, dcs_reg
);
391 hp_reg
&= ~(WM8961_HPR_ENA_DLY
| WM8961_HPR_ENA
|
392 WM8961_HPL_ENA_DLY
| WM8961_HPL_ENA
);
393 snd_soc_write(codec
, WM8961_ANALOGUE_HP_0
, hp_reg
);
395 /* Disable the PGA */
396 pwr_reg
&= ~(WM8961_LOUT1_PGA
| WM8961_ROUT1_PGA
);
397 snd_soc_write(codec
, WM8961_PWR_MGMT_2
, pwr_reg
);
399 /* Disable the charge pump */
400 dev_dbg(codec
->dev
, "Disabling charge pump\n");
401 snd_soc_write(codec
, WM8961_CHARGE_PUMP_1
,
402 cp_reg
& ~WM8961_CP_ENA
);
408 static int wm8961_spk_event(struct snd_soc_dapm_widget
*w
,
409 struct snd_kcontrol
*kcontrol
, int event
)
411 struct snd_soc_codec
*codec
= w
->codec
;
412 u16 pwr_reg
= snd_soc_read(codec
, WM8961_PWR_MGMT_2
);
413 u16 spk_reg
= snd_soc_read(codec
, WM8961_CLASS_D_CONTROL_1
);
415 if (event
& SND_SOC_DAPM_POST_PMU
) {
417 pwr_reg
|= WM8961_SPKL_PGA
| WM8961_SPKR_PGA
;
418 snd_soc_write(codec
, WM8961_PWR_MGMT_2
, pwr_reg
);
420 /* Enable the amplifier */
421 spk_reg
|= WM8961_SPKL_ENA
| WM8961_SPKR_ENA
;
422 snd_soc_write(codec
, WM8961_CLASS_D_CONTROL_1
, spk_reg
);
425 if (event
& SND_SOC_DAPM_PRE_PMD
) {
426 /* Enable the amplifier */
427 spk_reg
&= ~(WM8961_SPKL_ENA
| WM8961_SPKR_ENA
);
428 snd_soc_write(codec
, WM8961_CLASS_D_CONTROL_1
, spk_reg
);
431 pwr_reg
&= ~(WM8961_SPKL_PGA
| WM8961_SPKR_PGA
);
432 snd_soc_write(codec
, WM8961_PWR_MGMT_2
, pwr_reg
);
438 static const char *adc_hpf_text
[] = {
439 "Hi-fi", "Voice 1", "Voice 2", "Voice 3",
442 static const struct soc_enum adc_hpf
=
443 SOC_ENUM_SINGLE(WM8961_ADC_DAC_CONTROL_2
, 7, 4, adc_hpf_text
);
445 static const char *dac_deemph_text
[] = {
446 "None", "32kHz", "44.1kHz", "48kHz",
449 static const struct soc_enum dac_deemph
=
450 SOC_ENUM_SINGLE(WM8961_ADC_DAC_CONTROL_1
, 1, 4, dac_deemph_text
);
452 static const DECLARE_TLV_DB_SCALE(out_tlv
, -12100, 100, 1);
453 static const DECLARE_TLV_DB_SCALE(hp_sec_tlv
, -700, 100, 0);
454 static const DECLARE_TLV_DB_SCALE(adc_tlv
, -7200, 75, 1);
455 static const DECLARE_TLV_DB_SCALE(sidetone_tlv
, -3600, 300, 0);
456 static unsigned int boost_tlv
[] = {
457 TLV_DB_RANGE_HEAD(4),
458 0, 0, TLV_DB_SCALE_ITEM(0, 0, 0),
459 1, 1, TLV_DB_SCALE_ITEM(13, 0, 0),
460 2, 2, TLV_DB_SCALE_ITEM(20, 0, 0),
461 3, 3, TLV_DB_SCALE_ITEM(29, 0, 0),
463 static const DECLARE_TLV_DB_SCALE(pga_tlv
, -2325, 75, 0);
465 static const struct snd_kcontrol_new wm8961_snd_controls
[] = {
466 SOC_DOUBLE_R_TLV("Headphone Volume", WM8961_LOUT1_VOLUME
, WM8961_ROUT1_VOLUME
,
468 SOC_DOUBLE_TLV("Headphone Secondary Volume", WM8961_ANALOGUE_HP_2
,
469 6, 3, 7, 0, hp_sec_tlv
),
470 SOC_DOUBLE_R("Headphone ZC Switch", WM8961_LOUT1_VOLUME
, WM8961_ROUT1_VOLUME
,
473 SOC_DOUBLE_R_TLV("Speaker Volume", WM8961_LOUT2_VOLUME
, WM8961_ROUT2_VOLUME
,
475 SOC_DOUBLE_R("Speaker ZC Switch", WM8961_LOUT2_VOLUME
, WM8961_ROUT2_VOLUME
,
477 SOC_SINGLE("Speaker AC Gain", WM8961_CLASS_D_CONTROL_2
, 0, 7, 0),
479 SOC_SINGLE("DAC x128 OSR Switch", WM8961_ADC_DAC_CONTROL_2
, 0, 1, 0),
480 SOC_ENUM("DAC Deemphasis", dac_deemph
),
481 SOC_SINGLE("DAC Soft Mute Switch", WM8961_ADC_DAC_CONTROL_2
, 3, 1, 0),
483 SOC_DOUBLE_R_TLV("Sidetone Volume", WM8961_DSP_SIDETONE_0
,
484 WM8961_DSP_SIDETONE_1
, 4, 12, 0, sidetone_tlv
),
486 SOC_SINGLE("ADC High Pass Filter Switch", WM8961_ADC_DAC_CONTROL_1
, 0, 1, 0),
487 SOC_ENUM("ADC High Pass Filter Mode", adc_hpf
),
489 SOC_DOUBLE_R_TLV("Capture Volume",
490 WM8961_LEFT_ADC_VOLUME
, WM8961_RIGHT_ADC_VOLUME
,
492 SOC_DOUBLE_R_TLV("Capture Boost Volume",
493 WM8961_ADCL_SIGNAL_PATH
, WM8961_ADCR_SIGNAL_PATH
,
495 SOC_DOUBLE_R_TLV("Capture PGA Volume",
496 WM8961_LEFT_INPUT_VOLUME
, WM8961_RIGHT_INPUT_VOLUME
,
498 SOC_DOUBLE_R("Capture PGA ZC Switch",
499 WM8961_LEFT_INPUT_VOLUME
, WM8961_RIGHT_INPUT_VOLUME
,
501 SOC_DOUBLE_R("Capture PGA Switch",
502 WM8961_LEFT_INPUT_VOLUME
, WM8961_RIGHT_INPUT_VOLUME
,
506 static const char *sidetone_text
[] = {
507 "None", "Left", "Right"
510 static const struct soc_enum dacl_sidetone
=
511 SOC_ENUM_SINGLE(WM8961_DSP_SIDETONE_0
, 2, 3, sidetone_text
);
513 static const struct soc_enum dacr_sidetone
=
514 SOC_ENUM_SINGLE(WM8961_DSP_SIDETONE_1
, 2, 3, sidetone_text
);
516 static const struct snd_kcontrol_new dacl_mux
=
517 SOC_DAPM_ENUM("DACL Sidetone", dacl_sidetone
);
519 static const struct snd_kcontrol_new dacr_mux
=
520 SOC_DAPM_ENUM("DACR Sidetone", dacr_sidetone
);
522 static const struct snd_soc_dapm_widget wm8961_dapm_widgets
[] = {
523 SND_SOC_DAPM_INPUT("LINPUT"),
524 SND_SOC_DAPM_INPUT("RINPUT"),
526 SND_SOC_DAPM_SUPPLY("CLK_DSP", WM8961_CLOCKING2
, 4, 0, NULL
, 0),
528 SND_SOC_DAPM_PGA("Left Input", WM8961_PWR_MGMT_1
, 5, 0, NULL
, 0),
529 SND_SOC_DAPM_PGA("Right Input", WM8961_PWR_MGMT_1
, 4, 0, NULL
, 0),
531 SND_SOC_DAPM_ADC("ADCL", "HiFi Capture", WM8961_PWR_MGMT_1
, 3, 0),
532 SND_SOC_DAPM_ADC("ADCR", "HiFi Capture", WM8961_PWR_MGMT_1
, 2, 0),
534 SND_SOC_DAPM_MICBIAS("MICBIAS", WM8961_PWR_MGMT_1
, 1, 0),
536 SND_SOC_DAPM_MUX("DACL Sidetone", SND_SOC_NOPM
, 0, 0, &dacl_mux
),
537 SND_SOC_DAPM_MUX("DACR Sidetone", SND_SOC_NOPM
, 0, 0, &dacr_mux
),
539 SND_SOC_DAPM_DAC("DACL", "HiFi Playback", WM8961_PWR_MGMT_2
, 8, 0),
540 SND_SOC_DAPM_DAC("DACR", "HiFi Playback", WM8961_PWR_MGMT_2
, 7, 0),
542 /* Handle as a mono path for DCS */
543 SND_SOC_DAPM_PGA_E("Headphone Output", SND_SOC_NOPM
,
544 4, 0, NULL
, 0, wm8961_hp_event
,
545 SND_SOC_DAPM_POST_PMU
| SND_SOC_DAPM_PRE_PMD
),
546 SND_SOC_DAPM_PGA_E("Speaker Output", SND_SOC_NOPM
,
547 4, 0, NULL
, 0, wm8961_spk_event
,
548 SND_SOC_DAPM_POST_PMU
| SND_SOC_DAPM_PRE_PMD
),
550 SND_SOC_DAPM_OUTPUT("HP_L"),
551 SND_SOC_DAPM_OUTPUT("HP_R"),
552 SND_SOC_DAPM_OUTPUT("SPK_LN"),
553 SND_SOC_DAPM_OUTPUT("SPK_LP"),
554 SND_SOC_DAPM_OUTPUT("SPK_RN"),
555 SND_SOC_DAPM_OUTPUT("SPK_RP"),
559 static const struct snd_soc_dapm_route audio_paths
[] = {
560 { "DACL", NULL
, "CLK_DSP" },
561 { "DACL", NULL
, "DACL Sidetone" },
562 { "DACR", NULL
, "CLK_DSP" },
563 { "DACR", NULL
, "DACR Sidetone" },
565 { "DACL Sidetone", "Left", "ADCL" },
566 { "DACL Sidetone", "Right", "ADCR" },
568 { "DACR Sidetone", "Left", "ADCL" },
569 { "DACR Sidetone", "Right", "ADCR" },
571 { "HP_L", NULL
, "Headphone Output" },
572 { "HP_R", NULL
, "Headphone Output" },
573 { "Headphone Output", NULL
, "DACL" },
574 { "Headphone Output", NULL
, "DACR" },
576 { "SPK_LN", NULL
, "Speaker Output" },
577 { "SPK_LP", NULL
, "Speaker Output" },
578 { "SPK_RN", NULL
, "Speaker Output" },
579 { "SPK_RP", NULL
, "Speaker Output" },
581 { "Speaker Output", NULL
, "DACL" },
582 { "Speaker Output", NULL
, "DACR" },
584 { "ADCL", NULL
, "Left Input" },
585 { "ADCL", NULL
, "CLK_DSP" },
586 { "ADCR", NULL
, "Right Input" },
587 { "ADCR", NULL
, "CLK_DSP" },
589 { "Left Input", NULL
, "LINPUT" },
590 { "Right Input", NULL
, "RINPUT" },
594 /* Values for CLK_SYS_RATE */
598 } wm8961_clk_sys_ratio
[] = {
611 /* Values for SAMPLE_RATE */
627 static int wm8961_hw_params(struct snd_pcm_substream
*substream
,
628 struct snd_pcm_hw_params
*params
,
629 struct snd_soc_dai
*dai
)
631 struct snd_soc_codec
*codec
= dai
->codec
;
632 struct wm8961_priv
*wm8961
= snd_soc_codec_get_drvdata(codec
);
633 int i
, best
, target
, fs
;
636 fs
= params_rate(params
);
638 if (!wm8961
->sysclk
) {
639 dev_err(codec
->dev
, "MCLK has not been specified\n");
643 /* Find the closest sample rate for the filters */
645 for (i
= 0; i
< ARRAY_SIZE(wm8961_srate
); i
++) {
646 if (abs(wm8961_srate
[i
].rate
- fs
) <
647 abs(wm8961_srate
[best
].rate
- fs
))
650 reg
= snd_soc_read(codec
, WM8961_ADDITIONAL_CONTROL_3
);
651 reg
&= ~WM8961_SAMPLE_RATE_MASK
;
652 reg
|= wm8961_srate
[best
].val
;
653 snd_soc_write(codec
, WM8961_ADDITIONAL_CONTROL_3
, reg
);
654 dev_dbg(codec
->dev
, "Selected SRATE %dHz for %dHz\n",
655 wm8961_srate
[best
].rate
, fs
);
657 /* Select a CLK_SYS/fs ratio equal to or higher than required */
658 target
= wm8961
->sysclk
/ fs
;
660 if (substream
->stream
== SNDRV_PCM_STREAM_PLAYBACK
&& target
< 64) {
662 "SYSCLK must be at least 64*fs for DAC\n");
665 if (substream
->stream
== SNDRV_PCM_STREAM_CAPTURE
&& target
< 256) {
667 "SYSCLK must be at least 256*fs for ADC\n");
671 for (i
= 0; i
< ARRAY_SIZE(wm8961_clk_sys_ratio
); i
++) {
672 if (wm8961_clk_sys_ratio
[i
].ratio
>= target
)
675 if (i
== ARRAY_SIZE(wm8961_clk_sys_ratio
)) {
676 dev_err(codec
->dev
, "Unable to generate CLK_SYS_RATE\n");
679 dev_dbg(codec
->dev
, "Selected CLK_SYS_RATE of %d for %d/%d=%d\n",
680 wm8961_clk_sys_ratio
[i
].ratio
, wm8961
->sysclk
, fs
,
681 wm8961
->sysclk
/ fs
);
683 reg
= snd_soc_read(codec
, WM8961_CLOCKING_4
);
684 reg
&= ~WM8961_CLK_SYS_RATE_MASK
;
685 reg
|= wm8961_clk_sys_ratio
[i
].val
<< WM8961_CLK_SYS_RATE_SHIFT
;
686 snd_soc_write(codec
, WM8961_CLOCKING_4
, reg
);
688 reg
= snd_soc_read(codec
, WM8961_AUDIO_INTERFACE_0
);
689 reg
&= ~WM8961_WL_MASK
;
690 switch (params_format(params
)) {
691 case SNDRV_PCM_FORMAT_S16_LE
:
693 case SNDRV_PCM_FORMAT_S20_3LE
:
694 reg
|= 1 << WM8961_WL_SHIFT
;
696 case SNDRV_PCM_FORMAT_S24_LE
:
697 reg
|= 2 << WM8961_WL_SHIFT
;
699 case SNDRV_PCM_FORMAT_S32_LE
:
700 reg
|= 3 << WM8961_WL_SHIFT
;
705 snd_soc_write(codec
, WM8961_AUDIO_INTERFACE_0
, reg
);
707 /* Sloping stop-band filter is recommended for <= 24kHz */
708 reg
= snd_soc_read(codec
, WM8961_ADC_DAC_CONTROL_2
);
710 reg
|= WM8961_DACSLOPE
;
712 reg
&= ~WM8961_DACSLOPE
;
713 snd_soc_write(codec
, WM8961_ADC_DAC_CONTROL_2
, reg
);
718 static int wm8961_set_sysclk(struct snd_soc_dai
*dai
, int clk_id
,
722 struct snd_soc_codec
*codec
= dai
->codec
;
723 struct wm8961_priv
*wm8961
= snd_soc_codec_get_drvdata(codec
);
724 u16 reg
= snd_soc_read(codec
, WM8961_CLOCKING1
);
726 if (freq
> 33000000) {
727 dev_err(codec
->dev
, "MCLK must be <33MHz\n");
731 if (freq
> 16500000) {
732 dev_dbg(codec
->dev
, "Using MCLK/2 for %dHz MCLK\n", freq
);
733 reg
|= WM8961_MCLKDIV
;
736 dev_dbg(codec
->dev
, "Using MCLK/1 for %dHz MCLK\n", freq
);
737 reg
&= ~WM8961_MCLKDIV
;
740 snd_soc_write(codec
, WM8961_CLOCKING1
, reg
);
742 wm8961
->sysclk
= freq
;
747 static int wm8961_set_fmt(struct snd_soc_dai
*dai
, unsigned int fmt
)
749 struct snd_soc_codec
*codec
= dai
->codec
;
750 u16 aif
= snd_soc_read(codec
, WM8961_AUDIO_INTERFACE_0
);
752 aif
&= ~(WM8961_BCLKINV
| WM8961_LRP
|
753 WM8961_MS
| WM8961_FORMAT_MASK
);
755 switch (fmt
& SND_SOC_DAIFMT_MASTER_MASK
) {
756 case SND_SOC_DAIFMT_CBM_CFM
:
759 case SND_SOC_DAIFMT_CBS_CFS
:
765 switch (fmt
& SND_SOC_DAIFMT_FORMAT_MASK
) {
766 case SND_SOC_DAIFMT_RIGHT_J
:
769 case SND_SOC_DAIFMT_LEFT_J
:
773 case SND_SOC_DAIFMT_I2S
:
777 case SND_SOC_DAIFMT_DSP_B
:
779 case SND_SOC_DAIFMT_DSP_A
:
781 switch (fmt
& SND_SOC_DAIFMT_INV_MASK
) {
782 case SND_SOC_DAIFMT_NB_NF
:
783 case SND_SOC_DAIFMT_IB_NF
:
794 switch (fmt
& SND_SOC_DAIFMT_INV_MASK
) {
795 case SND_SOC_DAIFMT_NB_NF
:
797 case SND_SOC_DAIFMT_NB_IF
:
800 case SND_SOC_DAIFMT_IB_NF
:
801 aif
|= WM8961_BCLKINV
;
803 case SND_SOC_DAIFMT_IB_IF
:
804 aif
|= WM8961_BCLKINV
| WM8961_LRP
;
810 return snd_soc_write(codec
, WM8961_AUDIO_INTERFACE_0
, aif
);
813 static int wm8961_set_tristate(struct snd_soc_dai
*dai
, int tristate
)
815 struct snd_soc_codec
*codec
= dai
->codec
;
816 u16 reg
= snd_soc_read(codec
, WM8961_ADDITIONAL_CONTROL_2
);
823 return snd_soc_write(codec
, WM8961_ADDITIONAL_CONTROL_2
, reg
);
826 static int wm8961_digital_mute(struct snd_soc_dai
*dai
, int mute
)
828 struct snd_soc_codec
*codec
= dai
->codec
;
829 u16 reg
= snd_soc_read(codec
, WM8961_ADC_DAC_CONTROL_1
);
834 reg
&= ~WM8961_DACMU
;
838 return snd_soc_write(codec
, WM8961_ADC_DAC_CONTROL_1
, reg
);
841 static int wm8961_set_clkdiv(struct snd_soc_dai
*dai
, int div_id
, int div
)
843 struct snd_soc_codec
*codec
= dai
->codec
;
848 reg
= snd_soc_read(codec
, WM8961_CLOCKING2
);
849 reg
&= ~WM8961_BCLKDIV_MASK
;
851 snd_soc_write(codec
, WM8961_CLOCKING2
, reg
);
855 reg
= snd_soc_read(codec
, WM8961_AUDIO_INTERFACE_2
);
856 reg
&= ~WM8961_LRCLK_RATE_MASK
;
858 snd_soc_write(codec
, WM8961_AUDIO_INTERFACE_2
, reg
);
868 static int wm8961_set_bias_level(struct snd_soc_codec
*codec
,
869 enum snd_soc_bias_level level
)
873 /* This is all slightly unusual since we have no bypass paths
874 * and the output amplifier structure means we can just slam
875 * the biases straight up rather than having to ramp them
879 case SND_SOC_BIAS_ON
:
882 case SND_SOC_BIAS_PREPARE
:
883 if (codec
->dapm
.bias_level
== SND_SOC_BIAS_STANDBY
) {
884 /* Enable bias generation */
885 reg
= snd_soc_read(codec
, WM8961_ANTI_POP
);
886 reg
|= WM8961_BUFIOEN
| WM8961_BUFDCOPEN
;
887 snd_soc_write(codec
, WM8961_ANTI_POP
, reg
);
889 /* VMID=2*50k, VREF */
890 reg
= snd_soc_read(codec
, WM8961_PWR_MGMT_1
);
891 reg
&= ~WM8961_VMIDSEL_MASK
;
892 reg
|= (1 << WM8961_VMIDSEL_SHIFT
) | WM8961_VREF
;
893 snd_soc_write(codec
, WM8961_PWR_MGMT_1
, reg
);
897 case SND_SOC_BIAS_STANDBY
:
898 if (codec
->dapm
.bias_level
== SND_SOC_BIAS_PREPARE
) {
900 reg
= snd_soc_read(codec
, WM8961_PWR_MGMT_1
);
902 snd_soc_write(codec
, WM8961_PWR_MGMT_1
, reg
);
904 /* Bias generation off */
905 reg
= snd_soc_read(codec
, WM8961_ANTI_POP
);
906 reg
&= ~(WM8961_BUFIOEN
| WM8961_BUFDCOPEN
);
907 snd_soc_write(codec
, WM8961_ANTI_POP
, reg
);
910 reg
= snd_soc_read(codec
, WM8961_PWR_MGMT_1
);
911 reg
&= ~WM8961_VMIDSEL_MASK
;
912 snd_soc_write(codec
, WM8961_PWR_MGMT_1
, reg
);
916 case SND_SOC_BIAS_OFF
:
920 codec
->dapm
.bias_level
= level
;
926 #define WM8961_RATES SNDRV_PCM_RATE_8000_48000
928 #define WM8961_FORMATS \
929 (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \
930 SNDRV_PCM_FMTBIT_S24_LE)
932 static struct snd_soc_dai_ops wm8961_dai_ops
= {
933 .hw_params
= wm8961_hw_params
,
934 .set_sysclk
= wm8961_set_sysclk
,
935 .set_fmt
= wm8961_set_fmt
,
936 .digital_mute
= wm8961_digital_mute
,
937 .set_tristate
= wm8961_set_tristate
,
938 .set_clkdiv
= wm8961_set_clkdiv
,
941 static struct snd_soc_dai_driver wm8961_dai
= {
942 .name
= "wm8961-hifi",
944 .stream_name
= "HiFi Playback",
947 .rates
= WM8961_RATES
,
948 .formats
= WM8961_FORMATS
,},
950 .stream_name
= "HiFi Capture",
953 .rates
= WM8961_RATES
,
954 .formats
= WM8961_FORMATS
,},
955 .ops
= &wm8961_dai_ops
,
958 static int wm8961_probe(struct snd_soc_codec
*codec
)
960 struct snd_soc_dapm_context
*dapm
= &codec
->dapm
;
964 ret
= snd_soc_codec_set_cache_io(codec
, 8, 16, SND_SOC_I2C
);
966 dev_err(codec
->dev
, "Failed to set cache I/O: %d\n", ret
);
970 reg
= snd_soc_read(codec
, WM8961_SOFTWARE_RESET
);
972 dev_err(codec
->dev
, "Device is not a WM8961: ID=0x%x\n", reg
);
976 /* This isn't volatile - readback doesn't correspond to write */
977 codec
->cache_bypass
= 1;
978 reg
= snd_soc_read(codec
, WM8961_RIGHT_INPUT_VOLUME
);
979 codec
->cache_bypass
= 0;
980 dev_info(codec
->dev
, "WM8961 family %d revision %c\n",
981 (reg
& WM8961_DEVICE_ID_MASK
) >> WM8961_DEVICE_ID_SHIFT
,
982 ((reg
& WM8961_CHIP_REV_MASK
) >> WM8961_CHIP_REV_SHIFT
)
985 ret
= wm8961_reset(codec
);
987 dev_err(codec
->dev
, "Failed to issue reset\n");
992 reg
= snd_soc_read(codec
, WM8961_CHARGE_PUMP_B
);
993 reg
|= WM8961_CP_DYN_PWR_MASK
;
994 snd_soc_write(codec
, WM8961_CHARGE_PUMP_B
, reg
);
996 /* Latch volume update bits (right channel only, we always
997 * write both out) and default ZC on. */
998 reg
= snd_soc_read(codec
, WM8961_ROUT1_VOLUME
);
999 snd_soc_write(codec
, WM8961_ROUT1_VOLUME
,
1000 reg
| WM8961_LO1ZC
| WM8961_OUT1VU
);
1001 snd_soc_write(codec
, WM8961_LOUT1_VOLUME
, reg
| WM8961_LO1ZC
);
1002 reg
= snd_soc_read(codec
, WM8961_ROUT2_VOLUME
);
1003 snd_soc_write(codec
, WM8961_ROUT2_VOLUME
,
1004 reg
| WM8961_SPKRZC
| WM8961_SPKVU
);
1005 snd_soc_write(codec
, WM8961_LOUT2_VOLUME
, reg
| WM8961_SPKLZC
);
1007 reg
= snd_soc_read(codec
, WM8961_RIGHT_ADC_VOLUME
);
1008 snd_soc_write(codec
, WM8961_RIGHT_ADC_VOLUME
, reg
| WM8961_ADCVU
);
1009 reg
= snd_soc_read(codec
, WM8961_RIGHT_INPUT_VOLUME
);
1010 snd_soc_write(codec
, WM8961_RIGHT_INPUT_VOLUME
, reg
| WM8961_IPVU
);
1012 /* Use soft mute by default */
1013 reg
= snd_soc_read(codec
, WM8961_ADC_DAC_CONTROL_2
);
1014 reg
|= WM8961_DACSMM
;
1015 snd_soc_write(codec
, WM8961_ADC_DAC_CONTROL_2
, reg
);
1017 /* Use automatic clocking mode by default; for now this is all
1020 reg
= snd_soc_read(codec
, WM8961_CLOCKING_3
);
1021 reg
&= ~WM8961_MANUAL_MODE
;
1022 snd_soc_write(codec
, WM8961_CLOCKING_3
, reg
);
1024 wm8961_set_bias_level(codec
, SND_SOC_BIAS_STANDBY
);
1026 snd_soc_add_controls(codec
, wm8961_snd_controls
,
1027 ARRAY_SIZE(wm8961_snd_controls
));
1028 snd_soc_dapm_new_controls(dapm
, wm8961_dapm_widgets
,
1029 ARRAY_SIZE(wm8961_dapm_widgets
));
1030 snd_soc_dapm_add_routes(dapm
, audio_paths
, ARRAY_SIZE(audio_paths
));
1035 static int wm8961_remove(struct snd_soc_codec
*codec
)
1037 wm8961_set_bias_level(codec
, SND_SOC_BIAS_OFF
);
1042 static int wm8961_suspend(struct snd_soc_codec
*codec
, pm_message_t state
)
1044 wm8961_set_bias_level(codec
, SND_SOC_BIAS_OFF
);
1049 static int wm8961_resume(struct snd_soc_codec
*codec
)
1051 u16
*reg_cache
= codec
->reg_cache
;
1054 for (i
= 0; i
< codec
->driver
->reg_cache_size
; i
++) {
1055 if (reg_cache
[i
] == wm8961_reg_defaults
[i
])
1058 if (i
== WM8961_SOFTWARE_RESET
)
1061 snd_soc_write(codec
, i
, reg_cache
[i
]);
1064 wm8961_set_bias_level(codec
, SND_SOC_BIAS_STANDBY
);
1069 #define wm8961_suspend NULL
1070 #define wm8961_resume NULL
1073 static struct snd_soc_codec_driver soc_codec_dev_wm8961
= {
1074 .probe
= wm8961_probe
,
1075 .remove
= wm8961_remove
,
1076 .suspend
= wm8961_suspend
,
1077 .resume
= wm8961_resume
,
1078 .set_bias_level
= wm8961_set_bias_level
,
1079 .reg_cache_size
= ARRAY_SIZE(wm8961_reg_defaults
),
1080 .reg_word_size
= sizeof(u16
),
1081 .reg_cache_default
= wm8961_reg_defaults
,
1082 .volatile_register
= wm8961_volatile_register
,
1085 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
1086 static __devinit
int wm8961_i2c_probe(struct i2c_client
*i2c
,
1087 const struct i2c_device_id
*id
)
1089 struct wm8961_priv
*wm8961
;
1092 wm8961
= kzalloc(sizeof(struct wm8961_priv
), GFP_KERNEL
);
1096 i2c_set_clientdata(i2c
, wm8961
);
1098 ret
= snd_soc_register_codec(&i2c
->dev
,
1099 &soc_codec_dev_wm8961
, &wm8961_dai
, 1);
1105 static __devexit
int wm8961_i2c_remove(struct i2c_client
*client
)
1107 snd_soc_unregister_codec(&client
->dev
);
1108 kfree(i2c_get_clientdata(client
));
1112 static const struct i2c_device_id wm8961_i2c_id
[] = {
1116 MODULE_DEVICE_TABLE(i2c
, wm8961_i2c_id
);
1118 static struct i2c_driver wm8961_i2c_driver
= {
1120 .name
= "wm8961-codec",
1121 .owner
= THIS_MODULE
,
1123 .probe
= wm8961_i2c_probe
,
1124 .remove
= __devexit_p(wm8961_i2c_remove
),
1125 .id_table
= wm8961_i2c_id
,
1129 static int __init
wm8961_modinit(void)
1132 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
1133 ret
= i2c_add_driver(&wm8961_i2c_driver
);
1135 printk(KERN_ERR
"Failed to register wm8961 I2C driver: %d\n",
1141 module_init(wm8961_modinit
);
1143 static void __exit
wm8961_exit(void)
1145 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
1146 i2c_del_driver(&wm8961_i2c_driver
);
1149 module_exit(wm8961_exit
);
1151 MODULE_DESCRIPTION("ASoC WM8961 driver");
1152 MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
1153 MODULE_LICENSE("GPL");