tests/ofp-actions.at

   1 AT_BANNER([OpenFlow actions])
   2
   3 AT_SETUP([OpenFlow 1.0 action translation])
   4 AT_KEYWORDS([ofp-actions OF1.0])
   5 AT_DATA([test-data], [dnl
   6 # actions=LOCAL
   7 0000 0008 fffe 04d2
   8
   9 # actions=CONTROLLER:1234
  10 0000 0008 fffd 04d2
  11
  12 # actions=mod_vlan_vid:9
  13 0001 0008 0009 0000
  14
  15 # actions=mod_vlan_pcp:6
  16 0002 0008 06 000000
  17
  18 # actions=strip_vlan
  19 0003 0008 00000000
  20
  21 # actions=mod_dl_src:00:11:22:33:44:55
  22 0004 0010 001122334455 000000000000
  23
  24 # actions=mod_dl_dst:10:20:30:40:50:60
  25 0005 0010 102030405060 000000000000
  26
  27 # actions=mod_nw_src:1.2.3.4
  28 0006 0008 01020304
  29
  30 # actions=mod_nw_dst:192.168.0.1
  31 0007 0008 c0a80001
  32
  33 # actions=mod_nw_tos:48
  34 0008 0008 30 000000
  35
  36 # actions=mod_tp_src:80
  37 0009 0008 0050 0000
  38
  39 # actions=mod_tp_dst:443
  40 000a 0008 01bb 0000
  41
  42 # actions=enqueue:10:55
  43 000b 0010 000a 000000000000 00000037
  44
  45 # actions=resubmit:5
  46 ffff 0010 00002320 0001 0005 00000000
  47
  48 # actions=set_tunnel:0x12345678
  49 ffff 0010 00002320 0002 0000 12345678
  50
  51 # actions=set_queue:2309737729
  52 ffff 0010 00002320 0004 0000 89abcd01
  53
  54 # actions=pop_queue
  55 ffff 0010 00002320 0005 000000000000
  56
  57 # actions=move:NXM_OF_IN_PORT[]->NXM_OF_VLAN_TCI[]
  58 ffff 0018 00002320 0006 0010 0000 0000 00000002 00000802
  59
  60 # actions=load:0xf009->NXM_OF_VLAN_TCI[]
  61 ffff 0018 00002320 0007 000f 00000802 000000000000f009
  62
  63 # actions=note:11.e9.9a.ad.67.f3
  64 ffff 0010 00002320 0008 11e99aad67f3
  65
  66 # actions=set_tunnel64:0xc426384d49c53d60
  67 ffff 0018 00002320 0009 000000000000 c426384d49c53d60
  68
  69 # actions=set_tunnel64:0x885f3298
  70 ffff 0018 00002320 0009 000000000000 00000000885f3298
  71
  72 # bad OpenFlow10 actions: OFPBIC_UNSUP_INST
  73 & ofp_actions|WARN|write_metadata instruction not allowed here
  74 ffff 0020 00002320 0016 000000000000 fedcba9876543210 ffffffffffffffff
  75
  76 # bad OpenFlow10 actions: OFPBIC_UNSUP_INST
  77 & ofp_actions|WARN|write_metadata instruction not allowed here
  78 ffff 0020 00002320 0016 000000000000 fedcba9876543210 ffff0000ffff0000
  79
  80 # actions=multipath(eth_src,50,modulo_n,1,0,NXM_NX_REG0[])
  81 ffff 0020 00002320 000a 0000 0032 0000 0000 0000 0000 0000 0000 001f 00010004
  82
  83 # actions=bundle(eth_src,0,hrw,ofport,members:4,8)
  84 ffff 0028 00002320 000c 0001 0000 0000 00000002 0002 0000 00000000 00000000 dnl
  85 0004 0008 00000000
  86
  87 # actions=bundle_load(eth_src,0,hrw,ofport,NXM_NX_REG0[],members:4,8)
  88 ffff 0028 00002320 000d 0001 0000 0000 00000002 0002 001f 00010004 00000000 dnl
  89 0004 0008 00000000
  90
  91 # actions=resubmit(10,5)
  92 ffff 0010 00002320 000e 000a 05 000000
  93
  94 # actions=resubmit(10,5,ct)
  95 ffff 0010 00002320 002c 000a 05 000000
  96
  97 # actions=output:NXM_NX_REG1[5..10]
  98 ffff 0018 00002320 000f 0145 00010204 ffff 000000000000
  99
 100 # actions=learn(table=2,idle_timeout=10,hard_timeout=20,fin_idle_timeout=2,fin_hard_timeout=4,priority=80,cookie=0x123456789abcdef0,NXM_OF_VLAN_TCI[0..11],NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[],output:NXM_OF_IN_PORT[])
 101 ffff 0048 00002320 0010 000a 0014 0050 123456789abcdef0 0000 02 00 0002 0004 dnl
 102 000c 00000802 0000 00000802 0000 dnl
 103 0030 00000406 0000 00000206 0000 dnl
 104 1010 00000002 0000 dnl
 105 00000000
 106
 107 # actions=exit
 108 ffff 0010 00002320 0011 000000000000
 109
 110 # actions=dec_ttl
 111 ffff 0010 00002320 0012 000000000000
 112
 113 # actions=fin_timeout(idle_timeout=10,hard_timeout=20)
 114 ffff 0010 00002320 0013 000a 0014 0000
 115
 116 # actions=controller(reason=invalid_ttl,max_len=1234,id=5678)
 117 ffff 0010 00002320 0014 04d2 162e 02 00
 118
 119 # actions=controller(reason=invalid_ttl,max_len=1234,id=5678,userdata=01.02.03.04.05,pause)
 120 ffff 0040 00002320 0025   000000000000 dnl
 121 0000 0008 04d2   0000 dnl
 122 0001 0008 162e   0000 dnl
 123 0002 0005 02   000000 dnl
 124 0003 0009 0102030405   00000000000000 dnl
 125 0004 0004   00000000
 126
 127 # actions=dec_ttl(32768,12345,90,765,1024)
 128 ffff 0020 00002320 0015 000500000000 80003039005A02fd 0400000000000000
 129
 130 # actions=sample(probability=12345,collector_set_id=23456,obs_domain_id=34567,obs_point_id=45678)
 131 ffff 0018 00002320 001d 3039 00005BA0 00008707 0000B26E
 132
 133 # actions=sample(probability=12345,collector_set_id=23456,obs_domain_id=34567,obs_point_id=45678,sampling_port=56789)
 134 ffff 0020 00002320 0026 3039 00005BA0 00008707 0000B26E DDD50000 00000000
 135
 136 # actions=sample(probability=12345,collector_set_id=23456,obs_domain_id=34567,obs_point_id=45678,sampling_port=56789,egress)
 137 ffff 0020 00002320 0029 3039 00005BA0 00008707 0000B26E DDD50200 00000000
 138
 139 # bad OpenFlow10 actions: OFPBAC_BAD_LEN
 140 & ofp_actions|WARN|OpenFlow action OFPAT_OUTPUT length 240 exceeds action buffer length 8
 141 & ofp_actions|WARN|bad action at offset 0 (OFPBAC_BAD_LEN):
 142 & 00000000  00 00 00 f0 00 00 00 00-
 143 00 00 00 f0 00 00 00 00
 144
 145 # bad OpenFlow10 actions: OFPBAC_BAD_LEN
 146 & ofp_actions|WARN|OpenFlow action OFPAT_OUTPUT length 16 not in valid range [[8,8]]
 147 & ofp_actions|WARN|bad action at offset 0 (OFPBAC_BAD_LEN):
 148 & 00000000  00 00 00 10 ff fe ff ff-00 00 00 00 00 00 00 00
 149 00 00 00 10 ff fe ff ff 00 00 00 00 00 00 00 00
 150
 151 # bad OpenFlow10 actions: OFPBAC_BAD_LEN
 152 & ofp_actions|WARN|OpenFlow action NXAST_DEC_TTL_CNT_IDS length 17 is not a multiple of 8
 153 ffff 0011 00002320 0015 0001 00000000 0000000000000000
 154
 155 # bad OpenFlow10 actions: OFPBAC_BAD_OUT_PORT
 156 0000 0008 ffff 0000
 157
 158 # actions=ct()
 159 ffff 0018 00002320 0023 0000 00000000 0000 FF 000000 0000
 160
 161 # actions=ct(commit)
 162 ffff 0018 00002320 0023 0001 00000000 0000 FF 000000 0000
 163
 164 # actions=ct(commit,force)
 165 ffff 0018 00002320 0023 0003 00000000 0000 FF 000000 0000
 166
 167 # bad OpenFlow10 actions: OFPBAC_BAD_ARGUMENT
 168 ffff 0018 00002320 0023 0002 00000000 0000 FF 000000 0000
 169
 170 # actions=ct(table=10)
 171 ffff 0018 00002320 0023 0000 00000000 0000 0A 000000 0000
 172
 173 # actions=ct(zone=10)
 174 ffff 0018 00002320 0023 0000 00000000 000A FF 000000 0000
 175
 176 # actions=ct(zone=NXM_NX_REG0[0..15])
 177 ffff 0018 00002320 0023 0000 00010004 000F FF 000000 0000
 178
 179 dnl Can't read 8 bits from register into 16-bit zone.
 180 # bad OpenFlow10 actions: OFPBAC_BAD_SET_LEN
 181 ffff 0018 00002320 0023 0000 00010004 0007 FF 000000 0000
 182
 183 dnl Can't read 32 bits from register into 16-bit zone.
 184 # bad OpenFlow10 actions: OFPBAC_BAD_SET_LEN
 185 ffff 0018 00002320 0023 0000 00010004 001F FF 000000 0000
 186
 187 # actions=ct(commit,exec(load:0xf009->NXM_NX_CT_MARK[]))
 188 ffff 0030 00002320 0023 0001 00000000 0000 FF 000000 0000 dnl
 189 ffff 0018 00002320 0007 001f 0001d604 000000000000f009
 190
 191 # actions=ct(commit,force,exec(load:0xf009->NXM_NX_CT_MARK[]))
 192 ffff 0030 00002320 0023 0003 00000000 0000 FF 000000 0000 dnl
 193 ffff 0018 00002320 0007 001f 0001d604 000000000000f009
 194
 195 # actions=ct(commit,exec(load:0->NXM_NX_CT_LABEL[64..127],load:0x1d->NXM_NX_CT_LABEL[0..63]))
 196 ffff 0048 00002320 0023 0001 00000000 0000 FF 000000 0000 dnl
 197 ffff 0018 00002320 0007 103f 0001d810 0000 0000 0000 0000 dnl
 198 ffff 0018 00002320 0007 003f 0001d810 0000 0000 0000 001d
 199
 200 # bad OpenFlow10 actions: OFPBAC_BAD_SET_ARGUMENT
 201 & ofp_actions|WARN|cannot set CT fields outside of ct action
 202 ffff 0018 00002320 0007 001f 0001d604 000000000000f009
 203
 204 # bad OpenFlow10 actions: OFPBAC_BAD_SET_ARGUMENT
 205 & meta_flow|WARN|destination field ct_zone is not writable
 206 ffff 0030 00002320 0023 0001 00000000 0000 FF 000000 0000 dnl
 207 ffff 0018 00002320 0007 000f 0001d504 000000000000f009
 208
 209 # bad OpenFlow10 actions: OFPBAC_BAD_ARGUMENT
 210 & ofp_actions|WARN|ct action doesn't support nested action ct
 211 ffff 0030 00002320 0023 0001 00000000 0000 FF 000000 0000 dnl
 212 ffff 0018 00002320 0023 0000 00000000 0000 FF 000000 0000
 213
 214 # bad OpenFlow10 actions: OFPBAC_BAD_ARGUMENT
 215 & ofp_actions|WARN|ct action doesn't support nested modification of reg0
 216 ffff 0030 00002320 0023 0001 00000000 0000 FF 000000 0000 dnl
 217 ffff 0018 00002320 0007 001f 00010004 000000000000f009
 218
 219 # actions=ct(alg=ftp)
 220 ffff 0018 00002320 0023 0000 00000000 0000 FF 000000 0015
 221
 222 # actions=ct(alg=tftp)
 223 ffff 0018 00002320 0023 0000 00000000 0000 FF 000000 0045
 224
 225 # actions=ct(commit,nat(src))
 226 ffff 0028 00002320 0023 0001 00000000 0000 FF 000000 0000 dnl
 227 ffff 0010 00002320 0024 00 00 0001 0000
 228
 229 # actions=ct(commit,nat(dst))
 230 ffff 0028 00002320 0023 0001 00000000 0000 FF 000000 0000 dnl
 231 ffff 0010 00002320 0024 00 00 0002 0000
 232
 233 # actions=ct(nat)
 234 ffff 0028 00002320 0023 0000 00000000 0000 FF 000000 0000 dnl
 235 ffff 0010 00002320 0024 00 00 0000 0000
 236
 237 # actions=ct(commit,nat(src=10.0.0.240,random))
 238 ffff 0030 00002320 0023 0001 00000000 0000 FF 000000 0000 dnl
 239 ffff 0018 00002320 0024 00 00 0011 0001 0a0000f0 00000000
 240
 241 # actions=ct(commit,nat(src=10.0.0.240:32768-65535,random))
 242 ffff 0030 00002320 0023 0001 00000000 0000 FF 000000 0000 dnl
 243 ffff 0018 00002320 0024 00 00 0011 0031 0a0000f0 8000ffff
 244
 245 # actions=ct(commit,nat(dst=10.0.0.128-10.0.0.254,hash))
 246 ffff 0030 00002320 0023 0001 00000000 0000 FF 000000 0000 dnl
 247 ffff 0018 00002320 0024 00 00 000a 0003 0a000080 0a0000fe
 248
 249 # actions=ct(commit,nat(src=10.0.0.240-10.0.0.254:32768-65535,persistent))
 250 ffff 0038 00002320 0023 0001 00000000 0000 FF 000000 0000 dnl
 251 ffff 0020 00002320 0024 00 00 0005 0033 0a0000f0 0a0000fe 8000ffff 00000000
 252
 253 # actions=ct(commit,nat(src=fe80::20c:29ff:fe88:a18b,random))
 254 ffff 0038 00002320 0023 0001 00000000 0000 FF 000000 0000 dnl
 255 ffff 0020 00002320 0024 00 00 0011 0004 fe800000 00000000 020c 29ff fe88 a18b
 256
 257 # actions=ct(commit,nat(src=fe80::20c:29ff:fe88:1-fe80::20c:29ff:fe88:a18b,random))
 258 ffff 0048 00002320 0023 0001 00000000 0000 FF 000000 0000 dnl
 259 ffff 0030 00002320 0024 00 00 0011 000c fe800000 00000000 020c 29ff fe88 0001 fe800000 00000000 020c 29ff fe88 a18b
 260
 261 # actions=ct(commit,nat(src=[fe80::20c:29ff:fe88:1]-[fe80::20c:29ff:fe88:a18b]:255-4096,random))
 262 ffff 0050 00002320 0023 0001 00000000 0000 FF 000000 0000 dnl
 263 ffff 0038 00002320 0024 00 00 0011 003c dnl
 264 fe800000 00000000 020c 29ff fe88 0001 dnl
 265 fe800000 00000000 020c 29ff fe88 a18b dnl
 266 00ff1000 00000000
 267
 268 # actions=ct_clear
 269 ffff 0010 00002320 002b 000000000000
 270
 271 # actions=output(port=1,max_len=100)
 272 ffff 0010 00002320 0027 0001 00000064
 273
 274 # actions=clone(mod_vlan_vid:5,output:10)
 275 ffff 0020 00002320 002a 000000000000 dnl
 276 0001 0008 0005 0000 dnl
 277 0000 0008 000a 0000
 278
 279 # actions=learn(table=2,priority=0,NXM_OF_VLAN_TCI[0..11],NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[],output:NXM_OF_IN_PORT[])
 280 ffff 0050 00002320 002d 0000 0000 0000 0000000000000000 0000 02 00 0000 0000 00000000 0000 0000 dnl
 281 000c 00000802 0000 00000802 0000 dnl
 282 0030 00000406 0000 00000206 0000 dnl
 283 1010 00000002 0000 dnl
 284 00000000
 285
 286 # actions=learn(table=2,idle_timeout=10,hard_timeout=20,fin_idle_timeout=2,fin_hard_timeout=4,priority=80,cookie=0x123456789abcdef0,limit=1,NXM_OF_VLAN_TCI[0..11],NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[],output:NXM_OF_IN_PORT[])
 287 ffff 0050 00002320 002d 000a 0014 0050 123456789abcdef0 0000 02 00 0002 0004 00000001 0000 0000 dnl
 288 000c 00000802 0000 00000802 0000 dnl
 289 0030 00000406 0000 00000206 0000 dnl
 290 1010 00000002 0000 dnl
 291 00000000
 292
 293 # actions=learn(table=2,idle_timeout=10,hard_timeout=20,fin_idle_timeout=2,fin_hard_timeout=4,priority=80,cookie=0x123456789abcdef0,limit=1,result_dst=NXM_NX_REG0[8],NXM_OF_VLAN_TCI[0..11],NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[],output:NXM_OF_IN_PORT[])
 294 ffff 0050 00002320 002d 000a 0014 0050 123456789abcdef0 0004 02 00 0002 0004 00000001 0008 0000 dnl
 295 00010004 dnl
 296 000c 00000802 0000 00000802 0000 dnl
 297 0030 00000406 0000 00000206 0000 dnl
 298 1010 00000002 0000
 299
 300 # actions=group:5
 301 ffff 0010 00002320 0028 0000 00000005
 302
 303 # bad OpenFlow10 actions: NXBRC_MUST_BE_ZERO
 304 ffff 0018 00002320 0025 0000 0005 0000 1122334455 000005
 305
 306 # bad OpenFlow10 actions: NXBRC_MUST_BE_ZERO
 307 ffff 0018 00002320 0025 0000 0005 5000 1122334455 000000
 308
 309 # bad OpenFlow10 actions: OFPBAC_BAD_ARGUMENT
 310 ffff 0048 00002320 0023 0001 00000000 0000 FF 000000 0000 dnl
 311 ffff 0030 00002320 0024 00 00 0011 000c fe800000 00000000 020c 29ff fe88 a18b fe800000 00000000 020c 29ff fe88 0001
 312
 313 # actions=check_pkt_larger(1500)->NXM_NX_REG0[0]
 314 ffff 0018 00002320 0031 05dc 000000010004000000000000
 315
 316 # actions=check_pkt_larger(1000)->NXM_NX_XXREG1[4]
 317 ffff 0018 00002320 0031 03e8 00040001e010000000000000
 318
 319 # actions=delete_field:tun_metadata10
 320 ffff 0018 00002320 0032 00 01 64 7c 00 00 00 00 000000000000
 321
 322 ])
 323 sed '/^[[#&]]/d' < test-data > input.txt
 324 sed -n 's/^# //p; /^$/p' < test-data > expout
 325 sed -n 's/^& //p' < test-data > experr
 326 AT_CAPTURE_FILE([input.txt])
 327 AT_CAPTURE_FILE([expout])
 328 AT_CAPTURE_FILE([experr])
 329 AT_CHECK(
 330   [ovs-ofctl '-vPATTERN:console:%c|%p|%m' parse-actions OpenFlow10 < input.txt],
 331   [0], [expout], [experr])
 332 AT_CLEANUP
 333
 334 AT_SETUP([OpenFlow 1.0 "instruction" translations])
 335 AT_KEYWORDS([ofp-actions OF1.0 instruction])
 336 AT_DATA([test-data], [dnl
 337 dnl Try a couple of ordinary actions to make sure they're accepted,
 338 dnl but there's no point in retrying all the actions from the previous test.
 339 # actions=LOCAL
 340 0000 0008 fffe 04d2
 341
 342 # actions=mod_dl_src:00:11:22:33:44:55
 343 0004 0010 001122334455 000000000000
 344
 345 dnl Now check that write_metadata is accepted.
 346 # actions=write_metadata:0xfedcba9876543210
 347 ffff 0020 00002320 0016 000000000000 fedcba9876543210 ffffffffffffffff
 348
 349 # actions=write_metadata:0xfedcba9876543210/0xffff0000ffff0000
 350 ffff 0020 00002320 0016 000000000000 fedcba9876543210 ffff0000ffff0000
 351
 352 ])
 353 sed '/^[[#&]]/d' < test-data > input.txt
 354 sed -n 's/^# //p; /^$/p' < test-data > expout
 355 sed -n 's/^& //p' < test-data > experr
 356 AT_CAPTURE_FILE([input.txt])
 357 AT_CAPTURE_FILE([expout])
 358 AT_CAPTURE_FILE([experr])
 359 AT_CHECK(
 360   [ovs-ofctl '-vPATTERN:console:%c|%p|%m' parse-instructions OpenFlow10 < input.txt],
 361   [0], [expout], [experr])
 362 AT_CLEANUP
 363
 364 AT_SETUP([OpenFlow 1.1 action translation])
 365 AT_KEYWORDS([ofp-actions OF1.1])
 366 AT_DATA([test-data], [dnl
 367 # actions=LOCAL
 368 0000 0010 fffffffe 04d2 000000000000
 369
 370 # actions=CONTROLLER:1234
 371 0000 0010 fffffffd 04d2 000000000000
 372
 373 # actions=set_vlan_vid:9
 374 0001 0008 0009 0000
 375
 376 # actions=set_vlan_pcp:6
 377 0002 0008 06 000000
 378
 379 # actions=mod_dl_src:00:11:22:33:44:55
 380 0003 0010 001122334455 000000000000
 381
 382 # actions=mod_dl_dst:10:20:30:40:50:60
 383 0004 0010 102030405060 000000000000
 384
 385 # actions=mod_nw_src:1.2.3.4
 386 0005 0008 01020304
 387
 388 # actions=mod_nw_dst:192.168.0.1
 389 0006 0008 c0a80001
 390
 391 # actions=mod_nw_tos:48
 392 0007 0008 30 000000
 393
 394 # actions=mod_nw_ecn:2
 395 0008 0008 02 000000
 396
 397 # actions=mod_tp_src:80
 398 0009 0008 0050 0000
 399
 400 # actions=mod_tp_dst:443
 401 000a 0008 01bb 0000
 402
 403 # actions=pop_vlan
 404 0012 0008 00000000
 405
 406 # actions=set_queue:2309737729
 407 0015 0008 89abcd01
 408
 409 dnl 802.1ad isn't supported at the moment
 410 dnl # actions=push_vlan:0x88a8
 411 dnl 0011 0008 88a8 0000
 412 # actions=push_vlan:0x8100
 413 0011 0008 8100 0000
 414
 415 # actions=resubmit:5
 416 ffff 0010 00002320 0001 0005 00000000
 417
 418 # actions=set_tunnel:0x12345678
 419 ffff 0010 00002320 0002 0000 12345678
 420
 421 # actions=pop_queue
 422 ffff 0010 00002320 0005 000000000000
 423
 424 # actions=move:NXM_OF_IN_PORT[]->NXM_OF_VLAN_TCI[]
 425 ffff 0018 00002320 0006 0010 0000 0000 00000002 00000802
 426
 427 # actions=load:0xf009->NXM_OF_VLAN_TCI[]
 428 ffff 0018 00002320 0007 000f 00000802 000000000000f009
 429
 430 # actions=note:11.e9.9a.ad.67.f3
 431 ffff 0010 00002320 0008 11e99aad67f3
 432
 433 # actions=set_tunnel64:0xc426384d49c53d60
 434 ffff 0018 00002320 0009 000000000000 c426384d49c53d60
 435
 436 # actions=set_tunnel64:0x885f3298
 437 ffff 0018 00002320 0009 000000000000 00000000885f3298
 438
 439 dnl Write-Metadata is only allowed in contexts that allow instructions.
 440 & ofp_actions|WARN|write_metadata instruction not allowed here
 441 # bad OpenFlow11 actions: OFPBIC_UNSUP_INST
 442 ffff 0020 00002320 0016 000000000000 fedcba9876543210 ffffffffffffffff
 443
 444 # actions=multipath(eth_src,50,modulo_n,1,0,NXM_NX_REG0[])
 445 ffff 0020 00002320 000a 0000 0032 0000 0000 0000 0000 0000 0000 001f 00010004
 446
 447 # actions=bundle(eth_src,0,hrw,ofport,members:4,8)
 448 ffff 0028 00002320 000c 0001 0000 0000 00000002 0002 0000 00000000 00000000 dnl
 449 0004 0008 00000000
 450
 451 # actions=bundle_load(eth_src,0,hrw,ofport,NXM_NX_REG0[],members:4,8)
 452 ffff 0028 00002320 000d 0001 0000 0000 00000002 0002 001f 00010004 00000000 dnl
 453 0004 0008 00000000
 454
 455 # actions=resubmit(10,5)
 456 ffff 0010 00002320 000e 000a 05 000000
 457
 458 # actions=resubmit(10,5,ct)
 459 ffff 0010 00002320 002c 000a 05 000000
 460
 461 # actions=output:NXM_NX_REG1[5..10]
 462 ffff 0018 00002320 000f 0145 00010204 ffff 000000000000
 463
 464 # actions=learn(table=2,idle_timeout=10,hard_timeout=20,fin_idle_timeout=2,fin_hard_timeout=4,priority=80,cookie=0x123456789abcdef0,NXM_OF_VLAN_TCI[0..11],NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[],output:NXM_OF_IN_PORT[])
 465 ffff 0048 00002320 0010 000a 0014 0050 123456789abcdef0 0000 02 00 0002 0004 dnl
 466 000c 00000802 0000 00000802 0000 dnl
 467 0030 00000406 0000 00000206 0000 dnl
 468 1010 00000002 0000 dnl
 469 00000000
 470
 471 # actions=exit
 472 ffff 0010 00002320 0011 000000000000
 473
 474 dnl OpenFlow 1.1 OFPAT_DEC_TTL
 475 # actions=dec_ttl
 476 0018 0008 00000000
 477
 478 # actions=fin_timeout(idle_timeout=10,hard_timeout=20)
 479 ffff 0010 00002320 0013 000a 0014 0000
 480
 481 # actions=controller(reason=invalid_ttl,max_len=1234,id=5678)
 482 ffff 0010 00002320 0014 04d2 162e 02 00
 483
 484 # actions=dec_ttl(32768,12345,90,765,1024)
 485 ffff 0020 00002320 0015 000500000000 80003039005A02fd 0400000000000000
 486
 487 # actions=sample(probability=12345,collector_set_id=23456,obs_domain_id=34567,obs_point_id=45678)
 488 ffff 0018 00002320 001d 3039 00005BA0 00008707 0000B26E
 489
 490 # bad OpenFlow11 actions: OFPBAC_BAD_OUT_PORT
 491 & ofp_actions|WARN|bad action at offset 0 (OFPBAC_BAD_OUT_PORT):
 492 & 00000000  00 00 00 10 ff ff ff ff-00 00 00 00 00 00 00 00
 493 0000 0010 ffffffff 0000 000000000000
 494
 495 ])
 496 sed '/^[[#&]]/d' < test-data > input.txt
 497 sed -n 's/^# //p; /^$/p' < test-data > expout
 498 sed -n 's/^& //p' < test-data > experr
 499 AT_CAPTURE_FILE([input.txt])
 500 AT_CAPTURE_FILE([expout])
 501 AT_CAPTURE_FILE([experr])
 502 AT_CHECK(
 503   [ovs-ofctl '-vPATTERN:console:%c|%p|%m' parse-actions OpenFlow11 < input.txt],
 504   [0], [expout], [experr])
 505 AT_CLEANUP
 506
 507 AT_SETUP([OpenFlow 1.1 instruction translation])
 508 AT_KEYWORDS([OF1.1 instruction ofp-actions])
 509 AT_DATA([test-data], [dnl
 510 # actions=LOCAL
 511 0004 0018 00000000 dnl
 512 0000 0010 fffffffe 04d2 000000000000
 513
 514 dnl Apply-Actions non-zero padding
 515 # actions=drop
 516 #  0: 00 -> (none)
 517 #  1: 04 -> (none)
 518 #  2: 00 -> (none)
 519 #  3: 08 -> (none)
 520 #  4: 00 -> (none)
 521 #  5: 00 -> (none)
 522 #  6: 00 -> (none)
 523 #  7: 01 -> (none)
 524 0004 0008 00000001
 525
 526 dnl Check that an empty Apply-Actions instruction gets dropped.
 527 # actions=drop
 528 #  0: 00 -> (none)
 529 #  1: 04 -> (none)
 530 #  2: 00 -> (none)
 531 #  3: 08 -> (none)
 532 #  4: 00 -> (none)
 533 #  5: 00 -> (none)
 534 #  6: 00 -> (none)
 535 #  7: 00 -> (none)
 536 0004 0008 00000000
 537
 538 dnl Duplicate instruction type:
 539 # bad OpenFlow11 instructions: OFPBIC_DUP_INST
 540 0004 0008 00000000 0004 0008 00000000
 541
 542 dnl Instructions not multiple of 8 in length.
 543 & ofp_actions|WARN|OpenFlow message instructions length 9 is not a multiple of 8
 544 # bad OpenFlow11 instructions: OFPBIC_BAD_LEN
 545 0004 0009 01 00000000
 546
 547 dnl Goto-Table instruction too long.
 548 # bad OpenFlow11 instructions: OFPBIC_BAD_LEN
 549 0001 0010 01 000000 0000000000000000
 550
 551 dnl Goto-Table 1 instruction non-zero padding
 552 # actions=goto_table:1
 553 #  7: 01 -> 00
 554 0001 0008 01 000001
 555
 556 dnl Goto-Table 1 instruction go back to the previous table.
 557 # bad OpenFlow11 instructions: OFPBIC_BAD_TABLE_ID
 558 2,0001 0008 01 000000
 559
 560 dnl Goto-Table 1
 561 # actions=goto_table:1
 562 0001 0008 01 000000
 563
 564 dnl Write-Metadata.
 565 # actions=write_metadata:0xfedcba9876543210
 566 0002 0018 00000000 fedcba9876543210 ffffffffffffffff
 567
 568 dnl Write-Metadata as Nicira extension action is transformed into instruction.
 569 # actions=write_metadata:0xfedcba9876543210
 570 #  1: 04 -> 02
 571 #  3: 28 -> 18
 572 #  8: ff -> fe
 573 #  9: ff -> dc
 574 # 10: 00 -> ba
 575 # 11: 20 -> 98
 576 # 12: 00 -> 76
 577 # 13: 00 -> 54
 578 # 14: 23 -> 32
 579 # 15: 20 -> 10
 580 # 16: 00 -> ff
 581 # 17: 16 -> ff
 582 # 18: 00 -> ff
 583 # 19: 00 -> ff
 584 # 20: 00 -> ff
 585 # 21: 00 -> ff
 586 # 22: 00 -> ff
 587 # 23: 00 -> ff
 588 # 24: fe -> (none)
 589 # 25: dc -> (none)
 590 # 26: ba -> (none)
 591 # 27: 98 -> (none)
 592 # 28: 76 -> (none)
 593 # 29: 54 -> (none)
 594 # 30: 32 -> (none)
 595 # 31: 10 -> (none)
 596 # 32: ff -> (none)
 597 # 33: ff -> (none)
 598 # 34: ff -> (none)
 599 # 35: ff -> (none)
 600 # 36: ff -> (none)
 601 # 37: ff -> (none)
 602 # 38: ff -> (none)
 603 # 39: ff -> (none)
 604 0004 0028 00000000 ffff 0020 00002320 0016 000000000000 fedcba9876543210 ffffffffffffffff
 605
 606 dnl Write-Metadata with mask.
 607 # actions=write_metadata:0xfedcba9876543210/0xff00ff00ff00ff00
 608 0002 0018 00000000 fedcba9876543210 ff00ff00ff00ff00
 609
 610 dnl Write-Metadata too short.
 611 # bad OpenFlow11 instructions: OFPBIC_BAD_LEN
 612 0002 0010 00000000 fedcba9876543210
 613
 614 dnl Write-Metadata too long.
 615 # bad OpenFlow11 instructions: OFPBIC_BAD_LEN
 616 0002 0020 00000000 fedcba9876543210 ffffffffffffffff 0000000000000000
 617
 618 dnl Write-Metadata duplicated.
 619 # bad OpenFlow11 instructions: OFPBIC_DUP_INST
 620 0002 0018 00000000 fedcba9876543210 ff00ff00ff00ff00 0002 0018 00000000 fedcba9876543210 ff00ff00ff00ff00
 621
 622 dnl Write-Metadata in wrong position (OpenFlow 1.1+ disregards the order
 623 dnl and OVS reorders it to the canonical order)
 624 # actions=write_metadata:0xfedcba9876543210,goto_table:1
 625 #  1: 01 -> 02
 626 #  3: 08 -> 18
 627 #  4: 01 -> 00
 628 #  8: 00 -> fe
 629 #  9: 02 -> dc
 630 # 10: 00 -> ba
 631 # 11: 18 -> 98
 632 # 12: 00 -> 76
 633 # 13: 00 -> 54
 634 # 14: 00 -> 32
 635 # 15: 00 -> 10
 636 # 16: fe -> ff
 637 # 17: dc -> ff
 638 # 18: ba -> ff
 639 # 19: 98 -> ff
 640 # 20: 76 -> ff
 641 # 21: 54 -> ff
 642 # 22: 32 -> ff
 643 # 23: 10 -> ff
 644 # 24: ff -> 00
 645 # 25: ff -> 01
 646 # 26: ff -> 00
 647 # 27: ff -> 08
 648 # 28: ff -> 01
 649 # 29: ff -> 00
 650 # 30: ff -> 00
 651 # 31: ff -> 00
 652 0001 0008 01 000000 0002 0018 00000000 fedcba9876543210 ffffffffffffffff
 653
 654 dnl empty Write-Actions non-zero padding
 655 # actions=write_actions(drop)
 656 #  0: 00 -> (none)
 657 #  1: 03 -> (none)
 658 #  2: 00 -> (none)
 659 #  3: 08 -> (none)
 660 #  4: 00 -> (none)
 661 #  5: 00 -> (none)
 662 #  6: 00 -> (none)
 663 #  7: 01 -> (none)
 664 0003 0008 00000001
 665
 666 dnl Check that an empty Write-Actions instruction gets dropped.
 667 # actions=write_actions(drop)
 668 #  0: 00 -> (none)
 669 #  1: 03 -> (none)
 670 #  2: 00 -> (none)
 671 #  3: 08 -> (none)
 672 #  4: 00 -> (none)
 673 #  5: 00 -> (none)
 674 #  6: 00 -> (none)
 675 #  7: 00 -> (none)
 676 0003 0008 00000000
 677
 678 dnl Clear-Actions too-long
 679 # bad OpenFlow11 instructions: OFPBIC_BAD_LEN
 680 0005 0010 00000000 0000000000000000
 681
 682 dnl Clear-Actions non-zero padding
 683 # actions=clear_actions
 684 #  7: 01 -> 00
 685 0005 0008 00000001
 686
 687 dnl Clear-Actions non-zero padding
 688 # actions=clear_actions
 689 #  4: 01 -> 00
 690 0005 0008 01 000000
 691
 692 dnl Clear-Actions
 693 # actions=clear_actions
 694 0005 0008 00000000
 695
 696 dnl Experimenter actions not supported yet.
 697 # bad OpenFlow11 instructions: OFPBIC_BAD_EXPERIMENTER
 698 ffff 0008 01 000000
 699
 700 dnl Bad instruction number (0 not assigned).
 701 # bad OpenFlow11 instructions: OFPBIC_UNKNOWN_INST
 702 0000 0008 01 000000
 703
 704 ])
 705 sed '/^[[#&]]/d' < test-data > input.txt
 706 sed -n 's/^# //p; /^$/p' < test-data > expout
 707 sed -n 's/^& //p' < test-data > experr
 708 AT_CAPTURE_FILE([input.txt])
 709 AT_CAPTURE_FILE([expout])
 710 AT_CAPTURE_FILE([experr])
 711 AT_CHECK(
 712   [ovs-ofctl '-vPATTERN:console:%c|%p|%m' parse-instructions OpenFlow11 < input.txt],
 713   [0], [expout], [experr])
 714 AT_CLEANUP
 715
 716 dnl Our primary goal here is to verify OpenFlow 1.2-specific changes,
 717 dnl so the list of tests is short.
 718 AT_SETUP([OpenFlow 1.2 action translation])
 719 AT_KEYWORDS([ofp-actions OF1.2])
 720 AT_DATA([test-data], [dnl
 721 # actions=LOCAL
 722 0000 0010 fffffffe 04d2 000000000000
 723
 724 # bad OpenFlow12 actions: OFPBAC_BAD_SET_MASK
 725 & ofp_actions|WARN|bad action at offset 0 (OFPBAC_BAD_SET_MASK):
 726 & 00000000  00 19 00 18 80 00 09 0c-00 00 00 00 12 34 00 00
 727 & 00000010  00 00 ff ff 00 00 00 00-
 728 0019 0018 8000090c 000000001234 00000000ffff 00000000
 729
 730 ])
 731 sed '/^[[#&]]/d' < test-data > input.txt
 732 sed -n 's/^# //p; /^$/p' < test-data > expout
 733 sed -n 's/^& //p' < test-data > experr
 734 AT_CAPTURE_FILE([input.txt])
 735 AT_CAPTURE_FILE([expout])
 736 AT_CAPTURE_FILE([experr])
 737 AT_CHECK(
 738   [ovs-ofctl '-vPATTERN:console:%c|%p|%m' parse-actions OpenFlow12 < input.txt],
 739   [0], [expout], [experr])
 740 AT_CLEANUP
 741
 742 dnl Our primary goal here is to verify OpenFlow 1.3-specific changes,
 743 dnl so the list of tests is short.
 744 AT_SETUP([OpenFlow 1.3 action translation])
 745 AT_KEYWORDS([ofp-actions OF1.3])
 746 AT_DATA([test-data], [dnl
 747 # actions=LOCAL
 748 0000 0010 fffffffe 04d2 000000000000
 749
 750 dnl Check the Nicira extension form of "move".
 751 # actions=move:NXM_OF_IN_PORT[]->NXM_OF_VLAN_TCI[]
 752 ffff 0018 00002320 0006 0010 0000 0000 00000002 00000802
 753
 754 dnl Check the ONF extension form of "copy_field".
 755 # actions=move:NXM_OF_IN_PORT[]->NXM_OF_VLAN_TCI[]
 756 ffff 0020 4f4e4600 0c80 0000 0010 0000 0000 0000 00000002 00000802 00000000
 757
 758 dnl Check OpenFlow v1.3.4 Conformance Test: 430.500.
 759 # bad OpenFlow13 actions: OFPBAC_BAD_SET_TYPE
 760 & ofp_actions|WARN|bad action at offset 0 (OFPBAC_BAD_SET_TYPE):
 761 & 00000000  00 19 00 08 80 00 fe 00-00 00 00 10 00 00 00 01
 762 & 00000010  00 00 00 00 00 00 00 00-
 763 0019 0008 8000fe00 000000100000 000100000000 00000000
 764
 765 dnl Check OpenFlow v1.3.4 Conformance Test: 430.510.
 766 # bad OpenFlow13 actions: OFPBAC_BAD_SET_LEN
 767 & ofp_actions|WARN|bad action at offset 0 (OFPBAC_BAD_SET_LEN):
 768 & 00000000  00 19 00 10 80 00 08 07-00 01 02 03 04 05 00 00
 769 & 00000010  00 00 00 10 00 00 00 01-
 770 0019 0010 80000807 000102030405 000000000010 00000001
 771
 772 dnl Check NSH encap (experimenter extension).
 773 # actions=encap(nsh(md_type=1))
 774 ffff 0018 00002320 002e 0000 0001894f 0004 01 05 01 000000
 775
 776 dnl NSH encap with non-zero padding.
 777 # actions=encap(nsh(md_type=1))
 778 # 21: 12 -> 00
 779 # 22: 34 -> 00
 780 # 23: 56 -> 00
 781 ffff 0018 00002320 002e 0000 0001894f 0004 01 05 01 123456
 782
 783 ])
 784 sed '/^[[#&]]/d' < test-data > input.txt
 785 sed -n 's/^# //p; /^$/p' < test-data > expout
 786 sed -n 's/^& //p' < test-data > experr
 787 AT_CAPTURE_FILE([input.txt])
 788 AT_CAPTURE_FILE([expout])
 789 AT_CAPTURE_FILE([experr])
 790 AT_CHECK(
 791   [ovs-ofctl '-vPATTERN:console:%c|%p|%m' parse-actions OpenFlow13 < input.txt],
 792   [0], [expout], [experr])
 793 AT_CLEANUP
 794
 795 dnl Our primary goal here is to verify that OpenFlow 1.5-specific changes,
 796 dnl so the list of tests is short.
 797 AT_SETUP([OpenFlow 1.5 action translation])
 798 AT_KEYWORDS([ofp-actions OF1.5])
 799 AT_DATA([test-data], [dnl
 800 # actions=LOCAL
 801 0000 0010 fffffffe 04d2 000000000000
 802
 803 # actions=move:NXM_OF_IN_PORT[]->NXM_OF_VLAN_TCI[]
 804 001c 0018 0010 0000 0000 0000 00000002 00000802 00000000
 805
 806 # actions=set_field:00:00:00:00:12:34/00:00:00:00:ff:ff->eth_src
 807 0019 0018 8000090c 000000001234 00000000ffff 00000000
 808
 809 # actions=meter:5
 810 001d 0008 00000005
 811
 812 ])
 813 sed '/^[[#&]]/d' < test-data > input.txt
 814 sed -n 's/^# //p; /^$/p' < test-data > expout
 815 sed -n 's/^& //p' < test-data > experr
 816 AT_CAPTURE_FILE([input.txt])
 817 AT_CAPTURE_FILE([expout])
 818 AT_CAPTURE_FILE([experr])
 819 AT_CHECK(
 820   [ovs-ofctl '-vPATTERN:console:%c|%p|%m' parse-actions OpenFlow15 < input.txt],
 821   [0], [expout], [experr])
 822 AT_CLEANUP
 823
 824 AT_SETUP([ofp-actions - inconsistent MPLS actions])
 825 OVS_VSWITCHD_START
 826 dnl OK: Use fin_timeout action on TCP flow
 827 AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn add-flow br0 'tcp actions=fin_timeout(idle_timeout=1)'])
 828 dnl Bad: Use fin_timeout action on TCP flow that has been converted to MPLS
 829 AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn add-flow br0 'tcp actions=push_mpls:0x8847,fin_timeout(idle_timeout=1)'],
 830          [1], [], [dnl
 831 ovs-ofctl: none of the usable flow formats (OpenFlow10,NXM) is among the allowed flow formats (OpenFlow11)
 832 ])
 833 OVS_VSWITCHD_STOP
 834 AT_CLEANUP
 835
 836 AT_SETUP([reg_load <-> set_field translation corner case])
 837 AT_KEYWORDS([ofp-actions])
 838 OVS_VSWITCHD_START
 839 dnl In OpenFlow 1.3, set_field always sets all the bits in the field,
 840 dnl but when we translate to NXAST_LOAD we need to only set the bits that
 841 dnl actually exist (e.g. mpls_label only has 20 bits) otherwise OVS rejects
 842 dnl the "load" action as invalid.  Check that we do this correctly.
 843 AT_CHECK([ovs-ofctl -O OpenFlow13 add-flow br0 mpls,actions=set_field:10-\>mpls_label])
 844 AT_CHECK([ovs-ofctl -O OpenFlow10 dump-flows br0 | ofctl_strip], [0], [dnl
 845 NXST_FLOW reply:
 846  mpls actions=load:0xa->OXM_OF_MPLS_LABEL[[]]
 847 ])
 848 OVS_VSWITCHD_STOP
 849 AT_CLEANUP
 850
 851 AT_SETUP([enqueue action for OF1.1+])
 852 AT_KEYWORDS([ofp-actions])
 853 OVS_VSWITCHD_START
 854 dnl OpenFlow 1.0 has an "enqueue" action.  For OpenFlow 1.1+, we translate
 855 dnl it to a series of actions that accomplish the same thing.
 856 AT_CHECK([ovs-ofctl -O OpenFlow10 add-flow br0 'actions=enqueue(123,456)'])
 857 AT_CHECK([ovs-ofctl -O OpenFlow10 dump-flows br0 | ofctl_strip], [0], [dnl
 858 NXST_FLOW reply:
 859  actions=enqueue:123:456
 860 ])
 861 AT_CHECK([ovs-ofctl -O OpenFlow13 dump-flows br0 | ofctl_strip], [0], [dnl
 862 OFPST_FLOW reply (OF1.3):
 863  reset_counts actions=set_queue:456,output:123,pop_queue
 864 ])
 865 OVS_VSWITCHD_STOP
 866 AT_CLEANUP
 867
 868 AT_SETUP([mod_nw_ttl action for OF1.0])
 869 AT_KEYWORDS([ofp-actions])
 870 OVS_VSWITCHD_START
 871 dnl OpenFlow 1.1+ have a mod_nw_ttl action.  For OpenFlow 1.0, we translate
 872 dnl it to an Open vSwitch extension.
 873 AT_CHECK([ovs-ofctl -O OpenFlow11 add-flow br0 'ip,actions=mod_nw_ttl:123'])
 874 AT_CHECK([ovs-ofctl -O OpenFlow10 dump-flows br0 | ofctl_strip], [0], [dnl
 875 NXST_FLOW reply:
 876  ip actions=load:0x7b->NXM_NX_IP_TTL[[]]
 877 ])
 878 AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip], [0], [dnl
 879 OFPST_FLOW reply (OF1.1):
 880  ip actions=mod_nw_ttl:123
 881 ])
 882 OVS_VSWITCHD_STOP
 883 AT_CLEANUP
 884
 885 AT_SETUP([mod_nw_ecn action translation])
 886 AT_KEYWORDS([ofp-actions])
 887 OVS_VSWITCHD_START
 888
 889 dnl OpenFlow 1.1, but no other version, has a "mod_nw_ecn" action.
 890 dnl Check that we translate it properly for OF1.0 and OF1.2.
 891 dnl (OF1.3+ should be the same as OF1.2.)
 892 AT_CHECK([ovs-ofctl -O OpenFlow11 add-flow br0 'ip,actions=mod_nw_ecn:2'])
 893 AT_CHECK([ovs-ofctl -O OpenFlow10 dump-flows br0 | ofctl_strip], [0], [dnl
 894 NXST_FLOW reply:
 895  ip actions=load:0x2->NXM_NX_IP_ECN[[]]
 896 ])
 897 AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip], [0], [dnl
 898 OFPST_FLOW reply (OF1.1):
 899  ip actions=mod_nw_ecn:2
 900 ])
 901 AT_CHECK([ovs-ofctl -O OpenFlow12 dump-flows br0 | ofctl_strip], [0], [dnl
 902 OFPST_FLOW reply (OF1.2):
 903  ip actions=set_field:2->nw_ecn
 904 ])
 905
 906 dnl Check that OF1.2+ set_field to set ECN is translated into the OF1.1
 907 dnl mod_nw_ecn action.
 908 dnl
 909 dnl We don't do anything equivalent for OF1.0 reg_load because we prefer
 910 dnl that anything that comes in as reg_load gets translated back to reg_load
 911 dnl on output.  Perhaps this is somewhat inconsistent but it's what OVS
 912 dnl has done for multiple versions.
 913 AT_CHECK([ovs-ofctl del-flows br0])
 914 AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 'ip,actions=set_field:2->ip_ecn'])
 915 AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip], [0], [dnl
 916 OFPST_FLOW reply (OF1.1):
 917  ip actions=mod_nw_ecn:2
 918 ])
 919
 920 dnl Check that OF1.2+ set_field to set ECN is translated for earlier OF
 921 dnl versions.
 922 AT_CHECK([ovs-ofctl del-flows br0])
 923 AT_CHECK([ovs-ofctl -O OpenFlow10 add-flow br0 'ip,actions=set_field:2->ip_ecn'])
 924 AT_CHECK([ovs-ofctl del-flows br0])
 925 AT_CHECK([ovs-ofctl -O OpenFlow11 add-flow br0 'ip,actions=set_field:2->ip_ecn'])
 926
 927 OVS_VSWITCHD_STOP
 928 AT_CLEANUP
 929
 930 AT_SETUP([action parsing errors])
 931 bad_action () {
 932   AT_CHECK_UNQUOTED([ovs-ofctl parse-flow "actions=$1"], [1], [],
 933     [ovs-ofctl: $2
 934 ])
 935 }
 936
 937 # output
 938 bad_action 'output(port=xyzzy,max_len=5)' \
 939   "output to unknown truncate port: xyzzy"
 940 bad_action 'output(port=all,max_len=64)' \
 941   "output to unsupported truncate port: all"
 942 bad_action 'output(port=local,max_len=64,foo=bar)' \
 943   "invalid key 'foo' in output_trunc argument"
 944 bad_action 'output(port=local,max_len=5)' \
 945   "max_len 5 is less than the minimum value 14"
 946
 947 # controller
 948 bad_action 'controller(reason=asdf)' 'unknown reason "asdf"'
 949 bad_action 'controller(foo=bar)' 'unknown key "foo" parsing controller action'
 950 bad_action 'controller(userdata=123x456)' \
 951   'bad hex digit in `controller'\'' action `userdata'\'
 952
 953 # enqueue
 954 bad_action 'enqueue:123' \
 955   '"enqueue" syntax is "enqueue:PORT:QUEUE" or "enqueue(PORT,QUEUE)"'
 956 bad_action 'enqueue:asdf:123' 'asdf: enqueue to unknown port'
 957
 958 # bundle
 959 bad_action 'bundle:123' '123: not enough arguments to bundle action'
 960 bad_action 'bundle(symmetric_l4,60,hrw,ofport,ports:1,2,3,4,5)' \
 961   "symmetric_l4,60,hrw,ofport,ports:1,2,3,4,5: missing member delimiter, expected \`members', got \`ports'"
 962 bad_action 'bundle(symmetric_l4,60,hrw,ofport,members:xyzzy,2,3,4,5)' \
 963   'xyzzy: bad port number'
 964 bad_action 'bundle(asymmetric_l4,60,hrw,ofport,members:1,2,3,4,5)' \
 965   "asymmetric_l4,60,hrw,ofport,members:1,2,3,4,5: unknown fields \`asymmetric_l4'"
 966 bad_action 'bundle(symmetric_l4,60,hrt,ofport,members:1,2,3,4,5)' \
 967   "symmetric_l4,60,hrt,ofport,members:1,2,3,4,5: unknown algorithm \`hrt'"
 968 bad_action 'bundle(symmetric_l4,60,hrw,odpport,members:1,2,3,4,5)' \
 969   "symmetric_l4,60,hrw,odpport,members:1,2,3,4,5: unknown member_type \`odpport'"
 970 bad_action 'bundle_load(symmetric_l4,60,hrw,ofport,actset_output,members:1,2,3,4,5)' \
 971   "symmetric_l4,60,hrw,ofport,actset_output,members:1,2,3,4,5: experimenter OXM field 'actset_output' not supported"
 972
 973 # mod_vlan_vid
 974 bad_action 'mod_vlan_vid:6000' '6000: not a valid VLAN VID'
 975
 976 # mod_vlan_pcp
 977 bad_action 'mod_vlan_pcp:8' '8: not a valid VLAN PCP'
 978
 979 # push_vlan
 980 bad_action 'push_vlan(0x1234)' '0x1234: not a valid VLAN ethertype'
 981
 982 # mod_nw_tos
 983 bad_action 'mod_nw_tos(1)' '1: not a valid TOS'
 984
 985 # mod_nw_ecn
 986 bad_action 'mod_nw_ecn(5)' '5: not a valid ECN'
 987
 988 # set_field
 989 bad_action 'set_field:1' "1: missing \`->'"
 990 bad_action 'set_field:1->' "1->: missing field name following \`->'"
 991 bad_action 'set_field:1->x' 'x is not a valid OXM field name'
 992 bad_action 'set_field:1->eth_type' 'eth_type is read-only'
 993 bad_action 'set_field:1->eth_src' '1: invalid Ethernet address'
 994 bad_action 'set_field:0xffff->ip_dscp' '0xffff: value too large for 1-byte field ip_dscp'
 995 bad_action 'set_field:0xff->ip_dscp' '0xff is not a valid value for field ip_dscp'
 996
 997 # reg_load
 998 bad_action 'load:xyzzy->eth_src' 'xyzzy->eth_src: cannot parse integer value'
 999 bad_action 'load:0xff->eth_src[[1..5]]' '0xff->eth_src[[1..5]]: value 00:00:00:00:00:ff does not fit into 5 bits'
1000
1001 # push/pop
1002 bad_action 'push(eth_dst[[]]x)' 'x: trailing garbage following push or pop'
1003
1004 # dec_ttl
1005 bad_action 'dec_ttl(,)' 'dec_ttl_cnt_ids: expected at least one controller id.'
1006
1007 # set_mpls_label
1008 bad_action 'set_mpls_label' 'set_mpls_label: expected label.'
1009
1010 # set_mpls_tc
1011 bad_action 'set_mpls_tc' 'set_mpls_tc: expected tc.'
1012
1013 # set_mpls_ttl
1014 bad_action 'set_mpls_ttl' 'set_mpls_ttl: expected ttl.'
1015
1016 # fin_timeout
1017 bad_action 'fin_timeout(foo=bar)' "invalid key 'foo' in 'fin_timeout' argument"
1018
1019 # encap
1020 bad_action 'encap(,)' 'Missing encap hdr: ,'
1021 bad_action 'encap(x(y))' 'Encap hdr not supported: y'
1022 bad_action 'encap(nsh(type=1))' 'Invalid property: type'
1023 bad_action 'encap(nsh(md_type))' 'Value missing for encap property'
1024 bad_action 'encap(nsh(md_type=3))' 'invalid md_type'
1025 bad_action 'encap(nsh(tlv(,,)))' 'Invalid NSH TLV header: ,,'
1026
1027 # decap
1028 bad_action 'decap(packet_type(x))' 'Missing packet_type attribute ns'
1029 bad_action 'decap(packet_type(ns=99))' 'Unsupported ns value: 99'
1030 bad_action 'decap(packet_type(ns=0))' 'Missing packet_type attribute type'
1031 bad_action 'decap(foo=bar)' 'Invalid decap argument: foo'
1032
1033 # resubmit
1034 bad_action 'resubmit(asdf)' 'asdf: resubmit to unknown port'
1035 bad_action 'resubmit(,asdf)' 'asdf: resubmit to unknown table'
1036 bad_action 'resubmit(1,2,xyzzy)' 'xyzzy: unknown parameter'
1037 bad_action 'resubmit(in_port,255)' 'at least one "in_port" or "table" must be specified on resubmit'
1038
1039 # learn
1040 bad_action 'learn(load:123->actset_output)' \
1041   "123->actset_output: experimenter OXM field 'actset_output' not supported"
1042 bad_action 'learn(load:1234->eth_dst[[0..5]])' \
1043   '1234->eth_dst[[0..5]]: value does not fit into 6 bits'
1044 bad_action 'learn(actset_output=0x1000)' \
1045   "actset_output=0x1000: experimenter OXM field 'actset_output' not supported"
1046 bad_action 'learn(eth_type[[5]]=xyzzy)' \
1047   "eth_type[[5]]=xyzzy: eth_type[[5]] value xyzzy cannot be parsed as a subfield (xyzzy: unknown field \`xyzzy') or an immediate value (eth_type[[5]]=xyzzy: cannot parse integer value)"
1048 bad_action 'learn(eth_type[[0]]=eth_type[[1..2]])' \
1049   'eth_type[[0]]=eth_type[[1..2]]: bit widths of eth_type[[0]] (2) and eth_type[[1..2]] (1) differ'
1050 bad_action 'learn(load:->)' "load: missing source before \`->' in \`->'"
1051 bad_action 'learn(load:x)' "load: missing \`->' in \`x'"
1052 bad_action 'learn(load:1x->foo)' "load: garbage before \`->' in \`1x->foo'"
1053 bad_action 'learn(foo)' 'foo: unknown keyword foo'
1054 bad_action 'learn(table=foo)' 'unknown table "foo"'
1055 bad_action 'learn(table=255)' "table=255: table id 255 not valid for \`learn' action"
1056 bad_action 'learn(result_dst=tcp_flags)' 'tcp_flags is read-only'
1057 bad_action 'learn(result_dst=eth_dst)' "result_dst in 'learn' action must be a single bit"
1058
1059 # conjunction
1060 bad_action 'conjunction(1, 1/1)' 'conjunction must have at least 2 clauses'
1061 bad_action 'conjunction(1, 1/65)' 'conjunction must have at most 64 clauses'
1062 bad_action 'conjunction(1, 0/2)' 'clause index must be positive'
1063 bad_action 'conjunction(1, 3/2)' \
1064   'clause index must be less than or equal to number of clauses'
1065
1066 # multipath
1067 bad_action 'multipath(1,2,3,4)' \
1068   '1,2,3,4: not enough arguments to multipath action'
1069 bad_action 'multipath(xyzzy,50,modulo_n,1,0,NXM_NX_REG0[[]])' \
1070   "xyzzy,50,modulo_n,1,0,NXM_NX_REG0[[]]: unknown fields \`xyzzy'"
1071 bad_action 'multipath(eth_src,50,fubar,1,0,NXM_NX_REG0[[]])' \
1072   "eth_src,50,fubar,1,0,NXM_NX_REG0[[]]: unknown algorithm \`fubar'"
1073 bad_action 'multipath(eth_src,50,modulo_n,0,0,NXM_NX_REG0[[]])' \
1074   "eth_src,50,modulo_n,0,0,NXM_NX_REG0[[]]: n_links 0 is not in valid range 1 to 65536"
1075 bad_action 'multipath(eth_src,50,modulo_n,1024,0,actset_output)' \
1076   "eth_src,50,modulo_n,1024,0,actset_output: experimenter OXM field 'actset_output' not supported"
1077 bad_action 'multipath(eth_src,50,modulo_n,1024,0,NXM_NX_REG0[[0..7]])' \
1078   "eth_src,50,modulo_n,1024,0,NXM_NX_REG0[[0..7]]: 8-bit destination field has 256 possible values, less than specified n_links 1024"
1079
1080 # note
1081 bad_action 'note:x' "bad hex digit in \`note' argument"
1082
1083 # unroll_xlate
1084 bad_action 'unroll_xlate' "UNROLL is an internal action that shouldn't be used via OpenFlow"
1085
1086 # sample
1087 bad_action 'sample(probability=0)' 'invalid probability value "0"'
1088 bad_action 'sample(sampling_port=asdf)' 'asdf: unknown port'
1089 bad_action 'sample(foo=bar)' 'invalid key "foo" in "sample" argument'
1090 bad_action 'sample' 'non-zero "probability" must be specified on sample'
1091
1092 # ct
1093 bad_action 'ct(table=asdf)' 'unknown table asdf'
1094 bad_action 'ct(table=255)' 'invalid table 0xff'
1095 bad_action 'ct(foo=bar)' 'invalid argument to "ct" action: `foo'\'
1096 bad_action 'ct(force)' '"force" flag requires "commit" flag.'
1097
1098 # nat
1099 bad_action 'nat(src=1.2.3.4x)' 'garbage (x) after nat range "1.2.3.4x" (pos: 7)'
1100 bad_action 'nat(src=1.2.3.4-0.1.2.3)' 'invalid nat range "1.2.3.4-0.1.2.3"'
1101 bad_action 'nat(foo=bar)' 'invalid key "foo" in "nat" argument'
1102 bad_action 'nat(src=1.2.3.4,dst=2.3.4.5)' 'May only specify one of "src" or "dst".'
1103 bad_action 'nat(persistent)' 'Flags allowed only with "src" or "dst".'
1104 bad_action 'nat(src=1.2.3.4,hash,random)' 'Both "hash" and "random" are not allowed.'
1105
1106 # check_pkt_larger
1107 bad_action 'check_pkt_larger(1500)->reg0' \
1108   'Only 1-bit destination field is allowed'
1109
1110 # goto_table
1111 bad_action 'goto_table:asdf' 'unknown table "asdf"'
1112
1113 # nested actions
1114 bad_action 'set_field:1234->ct_mark' \
1115   "cannot set CT fields outside of ct action"
1116 bad_action 'nat' 'Cannot have NAT action outside of "ct" action'
1117 bad_action 'ct(commit,exec(push_vlan(0x8100)))' \
1118   "ct action doesn't support nested action push_vlan"
1119 bad_action 'ct(commit,exec(set_field:12:34:56:78:9a:bc->eth_dst))' \
1120   "ct action doesn't support nested modification of eth_dst"
1121 bad_action 'conjunction(1, 2/3),ct_clear' \
1122   '"conjunction" actions may be used along with "note" but not any other kind of action (such as the "ct_clear" action used here)'
1123
1124 # instructions
1125 bad_action 'goto_table:5,goto_table:5' \
1126   'duplicate goto_table instruction not allowed, for OpenFlow 1.1+ compatibility'
1127 bad_action 'goto_table:5,clone()' \
1128   'invalid instruction ordering: apply_actions must appear before goto_table, for OpenFlow 1.1+ compatibility'
1129 AT_CHECK([ovs-ofctl parse-group 'group_id=1,type=select,bucket=actions=clear_actions'], [1], [],
1130   [ovs-ofctl: clear_actions instruction not allowed here
1131 ])
1132
1133 # ofpacts_parse__()
1134 bad_action 'apply_actions' 'apply_actions is the default instruction'
1135 bad_action 'xyzzy' 'unknown action xyzzy'
1136 bad_action 'drop,3' '"drop" must not be accompanied by any other action or instruction'
1137
1138 AT_CLEANUP