1 AT_BANNER([OpenFlow actions])
3 AT_SETUP([OpenFlow 1.0 action translation])
4 AT_KEYWORDS([ofp-actions OF1.0])
5 AT_DATA([test-data], [dnl
9 # actions=CONTROLLER:1234
12 # actions=mod_vlan_vid:9
15 # actions=mod_vlan_pcp:6
21 # actions=mod_dl_src:00:11:22:33:44:55
22 0004 0010 001122334455 000000000000
24 # actions=mod_dl_dst:10:20:30:40:50:60
25 0005 0010 102030405060 000000000000
27 # actions=mod_nw_src:1.2.3.4
30 # actions=mod_nw_dst:192.168.0.1
33 # actions=mod_nw_tos:48
36 # actions=mod_tp_src:80
39 # actions=mod_tp_dst:443
42 # actions=enqueue:10:55
43 000b 0010 000a 000000000000 00000037
46 ffff 0010 00002320 0001 0005 00000000
48 # actions=set_tunnel:0x12345678
49 ffff 0010 00002320 0002 0000 12345678
51 # actions=set_queue:2309737729
52 ffff 0010 00002320 0004 0000 89abcd01
55 ffff 0010 00002320 0005 000000000000
57 # actions=move:NXM_OF_IN_PORT[]->NXM_OF_VLAN_TCI[]
58 ffff 0018 00002320 0006 0010 0000 0000 00000002 00000802
60 # actions=load:0xf009->NXM_OF_VLAN_TCI[]
61 ffff 0018 00002320 0007 000f 00000802 000000000000f009
63 # actions=note:11.e9.9a.ad.67.f3
64 ffff 0010 00002320 0008 11e99aad67f3
66 # actions=set_tunnel64:0xc426384d49c53d60
67 ffff 0018 00002320 0009 000000000000 c426384d49c53d60
69 # actions=set_tunnel64:0x885f3298
70 ffff 0018 00002320 0009 000000000000 00000000885f3298
72 # bad OpenFlow10 actions: OFPBIC_UNSUP_INST
73 & ofp_actions|WARN|write_metadata instruction not allowed here
74 ffff 0020 00002320 0016 000000000000 fedcba9876543210 ffffffffffffffff
76 # bad OpenFlow10 actions: OFPBIC_UNSUP_INST
77 & ofp_actions|WARN|write_metadata instruction not allowed here
78 ffff 0020 00002320 0016 000000000000 fedcba9876543210 ffff0000ffff0000
80 # actions=multipath(eth_src,50,modulo_n,1,0,NXM_NX_REG0[])
81 ffff 0020 00002320 000a 0000 0032 0000 0000 0000 0000 0000 0000 001f 00010004
83 # actions=bundle(eth_src,0,hrw,ofport,slaves:4,8)
84 ffff 0028 00002320 000c 0001 0000 0000 00000002 0002 0000 00000000 00000000 dnl
87 # actions=bundle_load(eth_src,0,hrw,ofport,NXM_NX_REG0[],slaves:4,8)
88 ffff 0028 00002320 000d 0001 0000 0000 00000002 0002 001f 00010004 00000000 dnl
91 # actions=resubmit(10,5)
92 ffff 0010 00002320 000e 000a 05 000000
94 # actions=output:NXM_NX_REG1[5..10]
95 ffff 0018 00002320 000f 0145 00010204 ffff 000000000000
97 # actions=learn(table=2,idle_timeout=10,hard_timeout=20,fin_idle_timeout=2,fin_hard_timeout=4,priority=80,cookie=0x123456789abcdef0,NXM_OF_VLAN_TCI[0..11],NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[],output:NXM_OF_IN_PORT[])
98 ffff 0048 00002320 0010 000a 0014 0050 123456789abcdef0 0000 02 00 0002 0004 dnl
99 000c 00000802 0000 00000802 0000 dnl
100 0030 00000406 0000 00000206 0000 dnl
101 1010 00000002 0000 dnl
105 ffff 0010 00002320 0011 000000000000
108 ffff 0010 00002320 0012 000000000000
110 # actions=fin_timeout(idle_timeout=10,hard_timeout=20)
111 ffff 0010 00002320 0013 000a 0014 0000
113 # actions=controller(reason=invalid_ttl,max_len=1234,id=5678)
114 ffff 0010 00002320 0014 04d2 162e 02 00
116 # actions=controller(reason=invalid_ttl,max_len=1234,id=5678,userdata=01.02.03.04.05,pause)
117 ffff 0040 00002320 0025 000000000000 dnl
118 0000 0008 04d2 0000 dnl
119 0001 0008 162e 0000 dnl
120 0002 0005 02 000000 dnl
121 0003 0009 0102030405 00000000000000 dnl
124 # actions=dec_ttl(32768,12345,90,765,1024)
125 ffff 0020 00002320 0015 000500000000 80003039005A02fd 0400000000000000
127 # actions=sample(probability=12345,collector_set_id=23456,obs_domain_id=34567,obs_point_id=45678)
128 ffff 0018 00002320 001d 3039 00005BA0 00008707 0000B26E
130 # bad OpenFlow10 actions: OFPBAC_BAD_LEN
131 & ofp_actions|WARN|OpenFlow action OFPAT_OUTPUT length 240 exceeds action buffer length 8
132 & ofp_actions|WARN|bad action at offset 0 (OFPBAC_BAD_LEN):
133 & 00000000 00 00 00 f0 00 00 00 00-
134 00 00 00 f0 00 00 00 00
136 # bad OpenFlow10 actions: OFPBAC_BAD_LEN
137 & ofp_actions|WARN|OpenFlow action OFPAT_OUTPUT length 16 not in valid range [[8,8]]
138 & ofp_actions|WARN|bad action at offset 0 (OFPBAC_BAD_LEN):
139 & 00000000 00 00 00 10 ff fe ff ff-00 00 00 00 00 00 00 00
140 00 00 00 10 ff fe ff ff 00 00 00 00 00 00 00 00
142 # bad OpenFlow10 actions: OFPBAC_BAD_LEN
143 & ofp_actions|WARN|OpenFlow action NXAST_DEC_TTL_CNT_IDS length 17 is not a multiple of 8
144 ffff 0011 00002320 0015 0001 00000000 0000000000000000
146 # bad OpenFlow10 actions: OFPBAC_BAD_OUT_PORT
150 ffff 0018 00002320 0023 0000 00000000 0000 FF 000000 0000
153 ffff 0018 00002320 0023 0001 00000000 0000 FF 000000 0000
155 # actions=ct(table=10)
156 ffff 0018 00002320 0023 0000 00000000 0000 0A 000000 0000
158 # actions=ct(zone=10)
159 ffff 0018 00002320 0023 0000 00000000 000A FF 000000 0000
161 # actions=ct(zone=NXM_NX_REG0[0..15])
162 ffff 0018 00002320 0023 0000 00010004 000F FF 000000 0000
164 dnl Can't read 8 bits from register into 16-bit zone.
165 # bad OpenFlow10 actions: OFPBAC_BAD_SET_LEN
166 ffff 0018 00002320 0023 0000 00010004 0007 FF 000000 0000
168 dnl Can't read 32 bits from register into 16-bit zone.
169 # bad OpenFlow10 actions: OFPBAC_BAD_SET_LEN
170 ffff 0018 00002320 0023 0000 00010004 001F FF 000000 0000
172 # actions=ct(commit,exec(load:0xf009->NXM_NX_CT_MARK[]))
173 ffff 0030 00002320 0023 0001 00000000 0000 FF 000000 0000 dnl
174 ffff 0018 00002320 0007 001f 0001d604 000000000000f009
176 # bad OpenFlow10 actions: OFPBAC_BAD_SET_ARGUMENT
177 & ofp_actions|WARN|cannot set CT fields outside of ct action
178 ffff 0018 00002320 0007 001f 0001d604 000000000000f009
180 # bad OpenFlow10 actions: OFPBAC_BAD_SET_ARGUMENT
181 & meta_flow|WARN|destination field ct_zone is not writable
182 ffff 0030 00002320 0023 0001 00000000 0000 FF 000000 0000 dnl
183 ffff 0018 00002320 0007 000f 0001d504 000000000000f009
185 # bad OpenFlow10 actions: OFPBAC_BAD_ARGUMENT
186 & ofp_actions|WARN|ct action doesn't support nested action ct
187 ffff 0030 00002320 0023 0001 00000000 0000 FF 000000 0000 dnl
188 ffff 0018 00002320 0023 0000 00000000 0000 FF 000000 0000
190 # bad OpenFlow10 actions: OFPBAC_BAD_ARGUMENT
191 & ofp_actions|WARN|ct action doesn't support nested modification of reg0
192 ffff 0030 00002320 0023 0001 00000000 0000 FF 000000 0000 dnl
193 ffff 0018 00002320 0007 001f 00010004 000000000000f009
195 # actions=ct(alg=ftp)
196 ffff 0018 00002320 0023 0000 00000000 0000 FF 000000 0015
198 # actions=ct(commit,nat(src))
199 ffff 0028 00002320 0023 0001 00000000 0000 FF 000000 0000 dnl
200 ffff 0010 00002320 0024 00 00 0001 0000
202 # actions=ct(commit,nat(dst))
203 ffff 0028 00002320 0023 0001 00000000 0000 FF 000000 0000 dnl
204 ffff 0010 00002320 0024 00 00 0002 0000
207 ffff 0028 00002320 0023 0000 00000000 0000 FF 000000 0000 dnl
208 ffff 0010 00002320 0024 00 00 0000 0000
210 # actions=ct(commit,nat(src=10.0.0.240,random))
211 ffff 0030 00002320 0023 0001 00000000 0000 FF 000000 0000 dnl
212 ffff 0018 00002320 0024 00 00 0011 0001 0a0000f0 00000000
214 # actions=ct(commit,nat(src=10.0.0.240:32768-65535,random))
215 ffff 0030 00002320 0023 0001 00000000 0000 FF 000000 0000 dnl
216 ffff 0018 00002320 0024 00 00 0011 0031 0a0000f0 8000ffff
218 # actions=ct(commit,nat(dst=10.0.0.128-10.0.0.254,hash))
219 ffff 0030 00002320 0023 0001 00000000 0000 FF 000000 0000 dnl
220 ffff 0018 00002320 0024 00 00 000a 0003 0a000080 0a0000fe
222 # actions=ct(commit,nat(src=10.0.0.240-10.0.0.254:32768-65535,persistent))
223 ffff 0038 00002320 0023 0001 00000000 0000 FF 000000 0000 dnl
224 ffff 0020 00002320 0024 00 00 0005 0033 0a0000f0 0a0000fe 8000ffff 00000000
226 # actions=ct(commit,nat(src=fe80::20c:29ff:fe88:a18b,random))
227 ffff 0038 00002320 0023 0001 00000000 0000 FF 000000 0000 dnl
228 ffff 0020 00002320 0024 00 00 0011 0004 fe800000 00000000 020c 29ff fe88 a18b
230 # actions=ct(commit,nat(src=fe80::20c:29ff:fe88:1-fe80::20c:29ff:fe88:a18b,random))
231 ffff 0048 00002320 0023 0001 00000000 0000 FF 000000 0000 dnl
232 ffff 0030 00002320 0024 00 00 0011 000c fe800000 00000000 020c 29ff fe88 0001 fe800000 00000000 020c 29ff fe88 a18b
234 # actions=ct(commit,nat(src=[fe80::20c:29ff:fe88:1]-[fe80::20c:29ff:fe88:a18b]:255-4096,random))
235 ffff 0050 00002320 0023 0001 00000000 0000 FF 000000 0000 dnl
236 ffff 0038 00002320 0024 00 00 0011 003c dnl
237 fe800000 00000000 020c 29ff fe88 0001 dnl
238 fe800000 00000000 020c 29ff fe88 a18b dnl
241 # bad OpenFlow10 actions: NXBRC_MUST_BE_ZERO
242 ffff 0018 00002320 0025 0000 0005 0000 1122334455 000005
244 # bad OpenFlow10 actions: NXBRC_MUST_BE_ZERO
245 ffff 0018 00002320 0025 0000 0005 5000 1122334455 000000
247 # bad OpenFlow10 actions: OFPBAC_BAD_ARGUMENT
248 ffff 0048 00002320 0023 0001 00000000 0000 FF 000000 0000 dnl
249 ffff 0030 00002320 0024 00 00 0011 000c fe800000 00000000 020c 29ff fe88 a18b fe800000 00000000 020c 29ff fe88 0001
252 sed '/^[[#&]]/d' < test-data > input.txt
253 sed -n 's/^# //p; /^$/p' < test-data > expout
254 sed -n 's/^& //p' < test-data > experr
255 AT_CAPTURE_FILE([input.txt])
256 AT_CAPTURE_FILE([expout])
257 AT_CAPTURE_FILE([experr])
259 [ovs-ofctl '-vPATTERN:console:%c|%p|%m' parse-actions OpenFlow10 < input.txt],
260 [0], [expout], [experr])
263 AT_SETUP([OpenFlow 1.0 "instruction" translations])
264 AT_KEYWORDS([ofp-actions OF1.0 instruction])
265 AT_DATA([test-data], [dnl
266 dnl Try a couple of ordinary actions to make sure they're accepted,
267 dnl but there's no point in retrying all the actions from the previous test.
271 # actions=mod_dl_src:00:11:22:33:44:55
272 0004 0010 001122334455 000000000000
274 dnl Now check that write_metadata is accepted.
275 # actions=write_metadata:0xfedcba9876543210
276 ffff 0020 00002320 0016 000000000000 fedcba9876543210 ffffffffffffffff
278 # actions=write_metadata:0xfedcba9876543210/0xffff0000ffff0000
279 ffff 0020 00002320 0016 000000000000 fedcba9876543210 ffff0000ffff0000
282 sed '/^[[#&]]/d' < test-data > input.txt
283 sed -n 's/^# //p; /^$/p' < test-data > expout
284 sed -n 's/^& //p' < test-data > experr
285 AT_CAPTURE_FILE([input.txt])
286 AT_CAPTURE_FILE([expout])
287 AT_CAPTURE_FILE([experr])
289 [ovs-ofctl '-vPATTERN:console:%c|%p|%m' parse-instructions OpenFlow10 < input.txt],
290 [0], [expout], [experr])
293 AT_SETUP([OpenFlow 1.1 action translation])
294 AT_KEYWORDS([ofp-actions OF1.1])
295 AT_DATA([test-data], [dnl
297 0000 0010 fffffffe 04d2 000000000000
299 # actions=CONTROLLER:1234
300 0000 0010 fffffffd 04d2 000000000000
302 # actions=set_vlan_vid:9
305 # actions=set_vlan_pcp:6
308 # actions=mod_dl_src:00:11:22:33:44:55
309 0003 0010 001122334455 000000000000
311 # actions=mod_dl_dst:10:20:30:40:50:60
312 0004 0010 102030405060 000000000000
314 # actions=mod_nw_src:1.2.3.4
317 # actions=mod_nw_dst:192.168.0.1
320 # actions=mod_nw_tos:48
323 # actions=mod_tp_src:80
326 # actions=mod_tp_dst:443
332 # actions=set_queue:2309737729
335 dnl 802.1ad isn't supported at the moment
336 dnl # actions=push_vlan:0x88a8
337 dnl 0011 0008 88a8 0000
338 # actions=push_vlan:0x8100
342 ffff 0010 00002320 0001 0005 00000000
344 # actions=set_tunnel:0x12345678
345 ffff 0010 00002320 0002 0000 12345678
348 ffff 0010 00002320 0005 000000000000
350 # actions=move:NXM_OF_IN_PORT[]->NXM_OF_VLAN_TCI[]
351 ffff 0018 00002320 0006 0010 0000 0000 00000002 00000802
353 # actions=load:0xf009->NXM_OF_VLAN_TCI[]
354 ffff 0018 00002320 0007 000f 00000802 000000000000f009
356 # actions=note:11.e9.9a.ad.67.f3
357 ffff 0010 00002320 0008 11e99aad67f3
359 # actions=set_tunnel64:0xc426384d49c53d60
360 ffff 0018 00002320 0009 000000000000 c426384d49c53d60
362 # actions=set_tunnel64:0x885f3298
363 ffff 0018 00002320 0009 000000000000 00000000885f3298
365 dnl Write-Metadata is only allowed in contexts that allow instructions.
366 & ofp_actions|WARN|write_metadata instruction not allowed here
367 # bad OpenFlow11 actions: OFPBIC_UNSUP_INST
368 ffff 0020 00002320 0016 000000000000 fedcba9876543210 ffffffffffffffff
370 # actions=multipath(eth_src,50,modulo_n,1,0,NXM_NX_REG0[])
371 ffff 0020 00002320 000a 0000 0032 0000 0000 0000 0000 0000 0000 001f 00010004
373 # actions=bundle(eth_src,0,hrw,ofport,slaves:4,8)
374 ffff 0028 00002320 000c 0001 0000 0000 00000002 0002 0000 00000000 00000000 dnl
377 # actions=bundle_load(eth_src,0,hrw,ofport,NXM_NX_REG0[],slaves:4,8)
378 ffff 0028 00002320 000d 0001 0000 0000 00000002 0002 001f 00010004 00000000 dnl
381 # actions=resubmit(10,5)
382 ffff 0010 00002320 000e 000a 05 000000
384 # actions=output:NXM_NX_REG1[5..10]
385 ffff 0018 00002320 000f 0145 00010204 ffff 000000000000
387 # actions=learn(table=2,idle_timeout=10,hard_timeout=20,fin_idle_timeout=2,fin_hard_timeout=4,priority=80,cookie=0x123456789abcdef0,NXM_OF_VLAN_TCI[0..11],NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[],output:NXM_OF_IN_PORT[])
388 ffff 0048 00002320 0010 000a 0014 0050 123456789abcdef0 0000 02 00 0002 0004 dnl
389 000c 00000802 0000 00000802 0000 dnl
390 0030 00000406 0000 00000206 0000 dnl
391 1010 00000002 0000 dnl
395 ffff 0010 00002320 0011 000000000000
397 dnl OpenFlow 1.1 OFPAT_DEC_TTL
401 # actions=fin_timeout(idle_timeout=10,hard_timeout=20)
402 ffff 0010 00002320 0013 000a 0014 0000
404 # actions=controller(reason=invalid_ttl,max_len=1234,id=5678)
405 ffff 0010 00002320 0014 04d2 162e 02 00
407 # actions=dec_ttl(32768,12345,90,765,1024)
408 ffff 0020 00002320 0015 000500000000 80003039005A02fd 0400000000000000
410 # actions=sample(probability=12345,collector_set_id=23456,obs_domain_id=34567,obs_point_id=45678)
411 ffff 0018 00002320 001d 3039 00005BA0 00008707 0000B26E
413 # bad OpenFlow11 actions: OFPBAC_BAD_OUT_PORT
414 & ofp_actions|WARN|bad action at offset 0 (OFPBAC_BAD_OUT_PORT):
415 & 00000000 00 00 00 10 ff ff ff ff-00 00 00 00 00 00 00 00
416 0000 0010 ffffffff 0000 000000000000
419 sed '/^[[#&]]/d' < test-data > input.txt
420 sed -n 's/^# //p; /^$/p' < test-data > expout
421 sed -n 's/^& //p' < test-data > experr
422 AT_CAPTURE_FILE([input.txt])
423 AT_CAPTURE_FILE([expout])
424 AT_CAPTURE_FILE([experr])
426 [ovs-ofctl '-vPATTERN:console:%c|%p|%m' parse-actions OpenFlow11 < input.txt],
427 [0], [expout], [experr])
430 AT_SETUP([OpenFlow 1.1 instruction translation])
431 AT_KEYWORDS([OF1.1 instruction ofp-actions])
432 AT_DATA([test-data], [dnl
434 0004 0018 00000000 dnl
435 0000 0010 fffffffe 04d2 000000000000
437 dnl Apply-Actions non-zero padding
449 dnl Check that an empty Apply-Actions instruction gets dropped.
461 dnl Duplicate instruction type:
462 # bad OpenFlow11 instructions: OFPBIC_DUP_INST
463 0004 0008 00000000 0004 0008 00000000
465 dnl Instructions not multiple of 8 in length.
466 & ofp_actions|WARN|OpenFlow message instructions length 9 is not a multiple of 8
467 # bad OpenFlow11 instructions: OFPBIC_BAD_LEN
468 0004 0009 01 00000000
470 dnl Goto-Table instruction too long.
471 # bad OpenFlow11 instructions: OFPBIC_BAD_LEN
472 0001 0010 01 000000 0000000000000000
474 dnl Goto-Table 1 instruction non-zero padding
475 # actions=goto_table:1
479 dnl Goto-Table 1 instruction go back to the previous table.
480 # bad OpenFlow11 instructions: OFPBIC_BAD_TABLE_ID
481 2,0001 0008 01 000000
484 # actions=goto_table:1
488 # actions=write_metadata:0xfedcba9876543210
489 0002 0018 00000000 fedcba9876543210 ffffffffffffffff
491 dnl Write-Metadata as Nicira extension action is transformed into instruction.
492 # actions=write_metadata:0xfedcba9876543210
527 0004 0028 00000000 ffff 0020 00002320 0016 000000000000 fedcba9876543210 ffffffffffffffff
529 dnl Write-Metadata with mask.
530 # actions=write_metadata:0xfedcba9876543210/0xff00ff00ff00ff00
531 0002 0018 00000000 fedcba9876543210 ff00ff00ff00ff00
533 dnl Write-Metadata too short.
534 # bad OpenFlow11 instructions: OFPBIC_BAD_LEN
535 0002 0010 00000000 fedcba9876543210
537 dnl Write-Metadata too long.
538 # bad OpenFlow11 instructions: OFPBIC_BAD_LEN
539 0002 0020 00000000 fedcba9876543210 ffffffffffffffff 0000000000000000
541 dnl Write-Metadata duplicated.
542 # bad OpenFlow11 instructions: OFPBIC_DUP_INST
543 0002 0018 00000000 fedcba9876543210 ff00ff00ff00ff00 0002 0018 00000000 fedcba9876543210 ff00ff00ff00ff00
545 dnl Write-Metadata in wrong position (OpenFlow 1.1+ disregards the order
546 dnl and OVS reorders it to the canonical order)
547 # actions=write_metadata:0xfedcba9876543210,goto_table:1
575 0001 0008 01 000000 0002 0018 00000000 fedcba9876543210 ffffffffffffffff
577 dnl empty Write-Actions non-zero padding
578 # actions=write_actions(drop)
589 dnl Check that an empty Write-Actions instruction gets dropped.
590 # actions=write_actions(drop)
601 dnl Clear-Actions too-long
602 # bad OpenFlow11 instructions: OFPBIC_BAD_LEN
603 0005 0010 00000000 0000000000000000
605 dnl Clear-Actions non-zero padding
606 # actions=clear_actions
610 dnl Clear-Actions non-zero padding
611 # actions=clear_actions
616 # actions=clear_actions
619 dnl Experimenter actions not supported yet.
620 # bad OpenFlow11 instructions: OFPBIC_BAD_EXPERIMENTER
623 dnl Bad instruction number (0 not assigned).
624 # bad OpenFlow11 instructions: OFPBIC_UNKNOWN_INST
628 sed '/^[[#&]]/d' < test-data > input.txt
629 sed -n 's/^# //p; /^$/p' < test-data > expout
630 sed -n 's/^& //p' < test-data > experr
631 AT_CAPTURE_FILE([input.txt])
632 AT_CAPTURE_FILE([expout])
633 AT_CAPTURE_FILE([experr])
635 [ovs-ofctl '-vPATTERN:console:%c|%p|%m' parse-instructions OpenFlow11 < input.txt],
636 [0], [expout], [experr])
639 dnl Our primary goal here is to verify OpenFlow 1.2-specific changes,
640 dnl so the list of tests is short.
641 AT_SETUP([OpenFlow 1.2 action translation])
642 AT_KEYWORDS([ofp-actions OF1.2])
643 AT_DATA([test-data], [dnl
645 0000 0010 fffffffe 04d2 000000000000
647 # bad OpenFlow12 actions: OFPBAC_BAD_SET_MASK
648 & ofp_actions|WARN|bad action at offset 0 (OFPBAC_BAD_SET_MASK):
649 & 00000000 00 19 00 18 80 00 09 0c-00 00 00 00 12 34 00 00
650 & 00000010 00 00 ff ff 00 00 00 00-
651 0019 0018 8000090c 000000001234 00000000ffff 00000000
654 sed '/^[[#&]]/d' < test-data > input.txt
655 sed -n 's/^# //p; /^$/p' < test-data > expout
656 sed -n 's/^& //p' < test-data > experr
657 AT_CAPTURE_FILE([input.txt])
658 AT_CAPTURE_FILE([expout])
659 AT_CAPTURE_FILE([experr])
661 [ovs-ofctl '-vPATTERN:console:%c|%p|%m' parse-actions OpenFlow12 < input.txt],
662 [0], [expout], [experr])
665 dnl Our primary goal here is to verify OpenFlow 1.3-specific changes,
666 dnl so the list of tests is short.
667 AT_SETUP([OpenFlow 1.3 action translation])
668 AT_KEYWORDS([ofp-actions OF1.3])
669 AT_DATA([test-data], [dnl
671 0000 0010 fffffffe 04d2 000000000000
673 dnl Check the Nicira extension form of "move".
674 # actions=move:NXM_OF_IN_PORT[]->NXM_OF_VLAN_TCI[]
675 ffff 0018 00002320 0006 0010 0000 0000 00000002 00000802
677 dnl Check the ONF extension form of "copy_field".
678 # actions=move:NXM_OF_IN_PORT[]->NXM_OF_VLAN_TCI[]
679 ffff 0020 4f4e4600 0c80 0000 0010 0000 0000 0000 00000002 00000802 00000000
682 sed '/^[[#&]]/d' < test-data > input.txt
683 sed -n 's/^# //p; /^$/p' < test-data > expout
684 sed -n 's/^& //p' < test-data > experr
685 AT_CAPTURE_FILE([input.txt])
686 AT_CAPTURE_FILE([expout])
687 AT_CAPTURE_FILE([experr])
689 [ovs-ofctl '-vPATTERN:console:%c|%p|%m' parse-actions OpenFlow13 < input.txt],
690 [0], [expout], [experr])
693 dnl Our primary goal here is to verify that OpenFlow 1.5-specific changes,
694 dnl so the list of tests is short.
695 AT_SETUP([OpenFlow 1.5 action translation])
696 AT_KEYWORDS([ofp-actions OF1.5])
697 AT_DATA([test-data], [dnl
699 0000 0010 fffffffe 04d2 000000000000
701 # actions=move:NXM_OF_IN_PORT[]->NXM_OF_VLAN_TCI[]
702 001c 0018 0010 0000 0000 0000 00000002 00000802 00000000
704 # actions=set_field:00:00:00:00:12:34/00:00:00:00:ff:ff->eth_src
705 0019 0018 8000090c 000000001234 00000000ffff 00000000
708 sed '/^[[#&]]/d' < test-data > input.txt
709 sed -n 's/^# //p; /^$/p' < test-data > expout
710 sed -n 's/^& //p' < test-data > experr
711 AT_CAPTURE_FILE([input.txt])
712 AT_CAPTURE_FILE([expout])
713 AT_CAPTURE_FILE([experr])
715 [ovs-ofctl '-vPATTERN:console:%c|%p|%m' parse-actions OpenFlow15 < input.txt],
716 [0], [expout], [experr])
719 AT_SETUP([ofp-actions - inconsistent MPLS actions])
721 dnl OK: Use fin_timeout action on TCP flow
722 AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn add-flow br0 'tcp actions=fin_timeout(idle_timeout=1)'])
723 dnl Bad: Use fin_timeout action on TCP flow that has been converted to MPLS
724 AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn add-flow br0 'tcp actions=push_mpls:0x8847,fin_timeout(idle_timeout=1)'],
726 ovs-ofctl: none of the usable flow formats (OpenFlow10,NXM) is among the allowed flow formats (OpenFlow11)
731 AT_SETUP([reg_load <-> set_field translation corner case])
732 AT_KEYWORDS([ofp-actions])
734 dnl In OpenFlow 1.3, set_field always sets all the bits in the field,
735 dnl but when we translate to NXAST_LOAD we need to only set the bits that
736 dnl actually exist (e.g. mpls_label only has 20 bits) otherwise OVS rejects
737 dnl the "load" action as invalid. Check that we do this correctly.
738 AT_CHECK([ovs-ofctl -O OpenFlow13 add-flow br0 mpls,actions=set_field:10-\>mpls_label])
739 AT_CHECK([ovs-ofctl -O OpenFlow10 dump-flows br0 | ofctl_strip], [0], [dnl
741 mpls actions=load:0xa->OXM_OF_MPLS_LABEL[[]]