xenserver/openvswitch-xen.spec

   1 # Spec file for Open vSwitch.
   2
   3 # Copyright (C) 2009, 2010 Nicira Networks, Inc.
   4 #
   5 # Copying and distribution of this file, with or without modification,
   6 # are permitted in any medium without royalty provided the copyright
   7 # notice and this notice are preserved.  This file is offered as-is,
   8 # without warranty of any kind.
   9
  10 # When building, the rpmbuild command line should define
  11 # openvswitch_version, xen_version, and build_number using -D arguments.
  12 # for example:
  13 #
  14 #    rpmbuild -D "openvswitch_version 0.8.9~1+build123" -D "xen_version 2.6.18-128.1.1.el5.xs5.1.0.483.1000xen" -D "build_number --with-build-number=123" -bb /usr/src/redhat/SPECS/openvswitch-xen.spec
  15 #
  16 %define version %{openvswitch_version}-%{xen_version}
  17
  18 Name: openvswitch
  19 Summary: Virtual switch
  20 Group: System Environment/Daemons
  21 URL: http://www.openvswitch.org/
  22 Vendor: Nicira Networks, Inc.
  23 Version: %{openvswitch_version}
  24
  25 # The entire source code is ASL 2.0 except datapath/ which is GPLv2
  26 License: ASL 2.0 and GPLv2
  27 Release: 1
  28 Source: openvswitch-%{openvswitch_version}.tar.gz
  29 Buildroot: /tmp/openvswitch-xen-rpm
  30 Requires: kernel-xen = %(echo '%{xen_version}' | sed 's/xen$//')
  31
  32 %description
  33 Open vSwitch provides standard network bridging functions augmented with
  34 support for the OpenFlow protocol for remote per-flow control of
  35 traffic.
  36
  37 %prep
  38 %setup -q -n openvswitch-%{openvswitch_version}
  39
  40 %build
  41 ./configure --prefix=/usr --sysconfdir=/etc --localstatedir=%{_localstatedir} --with-l26=/lib/modules/%{xen_version}/build --enable-ssl %{build_number}
  42 make %{_smp_mflags}
  43
  44 %install
  45 rm -rf $RPM_BUILD_ROOT
  46 make install DESTDIR=$RPM_BUILD_ROOT
  47 install -d -m 755 $RPM_BUILD_ROOT/etc
  48 install -d -m 755 $RPM_BUILD_ROOT/etc/init.d
  49 install -m 755 xenserver/etc_init.d_openvswitch \
  50          $RPM_BUILD_ROOT/etc/init.d/openvswitch
  51 install -m 755 xenserver/etc_init.d_openvswitch-xapi-update \
  52          $RPM_BUILD_ROOT/etc/init.d/openvswitch-xapi-update
  53 install -d -m 755 $RPM_BUILD_ROOT/etc/sysconfig
  54 install -d -m 755 $RPM_BUILD_ROOT/etc/logrotate.d
  55 install -m 755 xenserver/etc_logrotate.d_openvswitch \
  56          $RPM_BUILD_ROOT/etc/logrotate.d/openvswitch
  57 install -d -m 755 $RPM_BUILD_ROOT/etc/profile.d
  58 install -m 755 xenserver/etc_profile.d_openvswitch.sh \
  59          $RPM_BUILD_ROOT/etc/profile.d/openvswitch.sh
  60 install -d -m 755 $RPM_BUILD_ROOT/etc/xapi.d/plugins
  61 install -m 755 xenserver/etc_xapi.d_plugins_openvswitch-cfg-update \
  62          $RPM_BUILD_ROOT/etc/xapi.d/plugins/openvswitch-cfg-update
  63 install -d -m 755 $RPM_BUILD_ROOT/usr/share/openvswitch/scripts
  64 install -m 644 vswitchd/vswitch.ovsschema \
  65          $RPM_BUILD_ROOT/usr/share/openvswitch/vswitch.ovsschema
  66 install -m 755 xenserver/opt_xensource_libexec_interface-reconfigure \
  67              $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/interface-reconfigure
  68 install -m 644 xenserver/opt_xensource_libexec_InterfaceReconfigure.py \
  69              $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/InterfaceReconfigure.py
  70 install -m 644 xenserver/opt_xensource_libexec_InterfaceReconfigureBridge.py \
  71              $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/InterfaceReconfigureBridge.py
  72 install -m 644 xenserver/opt_xensource_libexec_InterfaceReconfigureVswitch.py \
  73              $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/InterfaceReconfigureVswitch.py
  74 install -m 755 xenserver/etc_xensource_scripts_vif \
  75              $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/vif
  76 install -m 755 xenserver/usr_share_openvswitch_scripts_refresh-network-uuids \
  77                $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/refresh-network-uuids
  78 install -m 755 xenserver/usr_sbin_xen-bugtool \
  79              $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/xen-bugtool
  80 install -m 755 xenserver/usr_sbin_brctl \
  81              $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/brctl
  82 install -m 755 xenserver/usr_share_openvswitch_scripts_sysconfig.template \
  83          $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/sysconfig.template
  84 install -d -m 755 $RPM_BUILD_ROOT/usr/lib/xsconsole/plugins-base
  85 install -m 644 \
  86         xenserver/usr_lib_xsconsole_plugins-base_XSFeatureVSwitch.py \
  87                $RPM_BUILD_ROOT/usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.py
  88
  89 install -d -m 755 $RPM_BUILD_ROOT/lib/modules/%{xen_version}/kernel/extra/openvswitch
  90 find datapath/linux-2.6 -name *.ko -exec install -m 755  \{\} $RPM_BUILD_ROOT/lib/modules/%{xen_version}/kernel/extra/openvswitch \;
  91
  92 # Get rid of stuff we don't want to make RPM happy.
  93 rm \
  94     $RPM_BUILD_ROOT/usr/bin/ovs-controller \
  95     $RPM_BUILD_ROOT/usr/bin/ovs-discover \
  96     $RPM_BUILD_ROOT/usr/bin/ovs-kill \
  97     $RPM_BUILD_ROOT/usr/bin/ovs-openflowd \
  98     $RPM_BUILD_ROOT/usr/bin/ovs-pki \
  99     $RPM_BUILD_ROOT/usr/bin/ovs-wdt \
 100     $RPM_BUILD_ROOT/usr/sbin/ovs-monitor \
 101     $RPM_BUILD_ROOT/usr/share/man/man8/ovs-controller.8 \
 102     $RPM_BUILD_ROOT/usr/share/man/man8/ovs-discover.8 \
 103     $RPM_BUILD_ROOT/usr/share/man/man8/ovs-kill.8 \
 104     $RPM_BUILD_ROOT/usr/share/man/man8/ovs-openflowd.8 \
 105     $RPM_BUILD_ROOT/usr/share/man/man8/ovs-pki.8
 106
 107 install -d -m 755 $RPM_BUILD_ROOT/var/lib/openvswitch
 108
 109 %clean
 110 rm -rf $RPM_BUILD_ROOT
 111
 112 %post
 113 if [ ! -f /etc/xensource-inventory ]; then
 114     printf "XenSource inventory not present in /etc/xensource-inventory"
 115     exit 1
 116 fi
 117
 118 if [ "$1" = "1" ]; then
 119     if md5sum -c --status <<EOF
 120 ca141d60061dcfdade73e75abc6529b5  /usr/sbin/brctl
 121 b8e9835862ef1a9cec2a3f477d26c989  /etc/xensource/scripts/vif
 122 51970ad613a3996d5997e18e44db47da  /opt/xensource/libexec/interface-reconfigure
 123 5654c8c36699fcc8744ca9cd5b855414  /usr/sbin/xen-bugtool
 124 EOF
 125     then
 126         printf "\nVerified host scripts from XenServer 5.5.0.\n\n"
 127     elif md5sum -c --status <<EOF
 128 ca141d60061dcfdade73e75abc6529b5  /usr/sbin/brctl
 129 b8e9835862ef1a9cec2a3f477d26c989  /etc/xensource/scripts/vif
 130 51970ad613a3996d5997e18e44db47da  /opt/xensource/libexec/interface-reconfigure
 131 f6519085c2fc5f7bc4eccc294ed62000  /usr/sbin/xen-bugtool
 132 EOF
 133     then
 134         printf "\nVerified host scripts from XenServer 5.5.0-24648p (Update 1)\n"
 135         printf "or 5.5.0-25727p (Update 2).\n\n"
 136     elif md5sum -c --status <<EOF
 137 ca141d60061dcfdade73e75abc6529b5  /usr/sbin/brctl
 138 02cf136237ed85fcbcc1efc15ce0591c  /opt/xensource/libexec/interface-reconfigure
 139 3a192ee70ebf2153c90051b3af95f331  /opt/xensource/libexec/InterfaceReconfigureBridge.py
 140 f71cadf1464caefa7943de0ab47fdd8a  /opt/xensource/libexec/InterfaceReconfigure.py
 141 d70f08f235fb1bfd49a0580e440f15a0  /opt/xensource/libexec/InterfaceReconfigureVswitch.py
 142 f5c85ca825b1e6f5a0845530981cd836  /etc/xensource/scripts/vif
 143 facb851606f82ca2bcc760a4d91bbe33  /usr/sbin/xen-bugtool
 144 EOF
 145     then
 146         printf "\nVerified host scripts from XenServer 5.5.900-29381p.\n\n"
 147     else
 148 cat <<EOF
 149
 150 The original XenServer scripts replaced by this package are not those
 151 of any supported version of XenServer.  This could lead to unexpected
 152 behavior of your server.  Unless you are sure you know what you are
 153 doing, it is highly recommended that you remove this package
 154 immediately after the install completes, which will restore the
 155 XenServer scripts that you were previously using.
 156
 157 EOF
 158     fi
 159 fi
 160
 161 if test ! -e /var/xapi/network.dbcache; then
 162     if test "$1" = 1; then
 163         printf "Creating xapi database cache...  "
 164     else
 165         printf "warning: Open vSwitch is being re-installed or upgraded,\n"
 166         printf "         but the xapi database cache is missing.\n"
 167         printf "Re-creating xapi database cache...  "
 168     fi
 169
 170     if /usr/share/openvswitch/scripts/interface-reconfigure rewrite; then
 171         printf "done.\n"
 172     else
 173         printf "FAILED\n"
 174         printf "Open vSwitch can only be installed on a XenServer that\n"
 175         printf "has connectivity to xapi on the pool master.  Please\n"
 176         printf "fix connectivity to the pool master, then try again.\n"
 177         exit 1
 178     fi
 179 fi
 180
 181 # Ensure that modprobe will find our modules.
 182 depmod %{xen_version}
 183
 184 if grep -F net.ipv4.conf.all.arp_filter /etc/sysctl.conf >/dev/null 2>&1; then :; else
 185     cat >>/etc/sysctl.conf <<EOF
 186 # This works around an issue in xhad, which binds to a particular
 187 # Ethernet device, which in turn causes ICMP port unreachable messages
 188 # if packets are received are on the wrong interface, which in turn
 189 # can happen if we send out ARP replies on every interface (as Linux
 190 # does by default) instead of just on the interface that has the IP
 191 # address being ARPed for, which this sysctl setting in turn works
 192 # around.
 193 #
 194 # Bug #1378.
 195 net.ipv4.conf.all.arp_filter = 1
 196 EOF
 197 fi
 198
 199 if test ! -e /etc/openvswitch/conf.db; then
 200     install -d -m 755 -o root -g root /etc/openvswitch
 201
 202     # Create ovs-vswitchd config database
 203     ovsdb-tool -vANY:console:emer create /etc/openvswitch/conf.db \
 204             /usr/share/openvswitch/vswitch.ovsschema
 205
 206     # Create initial table in config database
 207     ovsdb-tool -vANY:console:emer transact /etc/openvswitch/conf.db \
 208             '[{"op": "insert", "table": "Open_vSwitch", "row": {}}]' \
 209             > /dev/null
 210 fi
 211
 212 # Create default or update existing /etc/sysconfig/openvswitch.
 213 SYSCONFIG=/etc/sysconfig/openvswitch
 214 TEMPLATE=/usr/share/openvswitch/scripts/sysconfig.template
 215 if [ ! -e $SYSCONFIG ]; then
 216     cp $TEMPLATE $SYSCONFIG
 217 else
 218     for var in $(awk -F'[ :]' '/^# [_A-Z0-9]+:/{print $2}' $TEMPLATE)
 219     do
 220         if ! grep $var $SYSCONFIG >/dev/null 2>&1; then
 221             echo >> $SYSCONFIG
 222             sed -n "/$var:/,/$var=/p" $TEMPLATE >> $SYSCONFIG
 223         fi
 224     done
 225 fi
 226
 227 # Replace XenServer files by our versions.
 228 mkdir -p /usr/lib/openvswitch/xs-original \
 229     || printf "Could not create script backup directory.\n"
 230 for f in \
 231     /opt/xensource/libexec/interface-reconfigure \
 232     /opt/xensource/libexec/InterfaceReconfigure.py \
 233     /opt/xensource/libexec/InterfaceReconfigureBridge.py \
 234     /opt/xensource/libexec/InterfaceReconfigureVswitch.py \
 235     /etc/xensource/scripts/vif \
 236     /usr/sbin/xen-bugtool \
 237     /usr/sbin/brctl
 238 do
 239     s=$(basename "$f")
 240     t=$(readlink "$f")
 241     if [ -f "$f" ] && [ "$t" != "/usr/share/openvswitch/scripts/$s" ]; then
 242         mv "$f" /usr/lib/openvswitch/xs-original/ \
 243             || printf "Could not save original XenServer $s script\n"
 244         ln -s "/usr/share/openvswitch/scripts/$s" "$f" \
 245             || printf "Could not link to Open vSwitch $s script\n"
 246     fi
 247 done
 248
 249 # Ensure all required services are set to run
 250 for s in openvswitch openvswitch-xapi-update; do
 251     if chkconfig --list $s >/dev/null 2>&1; then
 252         chkconfig --del $s || printf "Could not remove $s init script."
 253     fi
 254     chkconfig --add $s || printf "Could not add $s init script."
 255     chkconfig $s on || printf "Could not enable $s init script."
 256 done
 257
 258 # Configure system to use Open vSwitch
 259 echo vswitch > /etc/xensource/network.conf
 260
 261 if [ "$1" = "1" ]; then    # $1 = 2 for upgrade
 262     printf "\nYou MUST reboot the server NOW to complete the change to\n"
 263     printf "Open vSwitch.  Attempts to modify networking on the server\n"
 264     printf "or any hosted VM will fail until after the reboot and could\n"
 265     printf "leave the server in an state requiring manual recovery.\n\n"
 266 else
 267     printf "\nTo use the new Open vSwitch install, you should reboot the\n"
 268     printf "server now.  Failure to do so may result in incorrect operation."
 269     printf "\n\n"
 270 fi
 271
 272 %preun
 273 if [ "$1" = "0" ]; then     # $1 = 1 for upgrade
 274     for s in openvswitch openvswitch-xapi-update; do
 275         chkconfig --del $s || printf "Could not remove $s init script."
 276     done
 277 fi
 278
 279
 280 %postun
 281 if [ "$1" = "0" ]; then     # $1 = 1 for upgrade
 282
 283     rm -f /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.pyc \
 284         /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.pyo
 285
 286     rm -f /usr/share/openvswitch/scripts/InterfaceReconfigure.pyc \
 287         /usr/share/openvswitch/scripts/InterfaceReconfigure.pyo \
 288         /usr/share/openvswitch/scripts/InterfaceReconfigureBridge.pyc \
 289         /usr/share/openvswitch/scripts/InterfaceReconfigureBridge.pyo \
 290         /usr/share/openvswitch/scripts/InterfaceReconfigureVSwitch.pyc \
 291         /usr/share/openvswitch/scripts/InterfaceReconfigureVSwitch.pyo
 292
 293     # Restore original XenServer scripts
 294     for f in \
 295         /opt/xensource/libexec/interface-reconfigure \
 296         /etc/xensource/scripts/vif \
 297         /usr/sbin/xen-bugtool \
 298         /usr/sbin/brctl
 299     do
 300         s=$(basename "$f")
 301         if [ ! -f "/usr/lib/openvswitch/xs-original/$s" ]; then
 302             printf "Original XenServer $s script not present in /usr/lib/openvswitch/xs-original\n"
 303             printf "Could not restore original XenServer script.\n"
 304         else
 305             (rm -f "$f" \
 306                 && mv "/usr/lib/openvswitch/xs-original/$s" "$f") \
 307                 || printf "Could not restore original XenServer $s script.\n"
 308         fi
 309     done
 310
 311     # Remove all configuration files
 312     rm -f /etc/openvswitch/conf.db
 313     rm -f /etc/sysconfig/openvswitch
 314     rm -f /etc/openvswitch/vswitchd.cacert
 315     rm -f /var/xapi/network.dbcache
 316
 317     # Configure system to use bridge
 318     echo bridge > /etc/xensource/network.conf
 319
 320     printf "\nYou MUST reboot the server now to complete the change to\n"
 321     printf "standard Xen networking.  Attempts to modify networking on the\n"
 322     printf "server or any hosted VM will fail until after the reboot and\n"
 323     printf "could leave the server in a state requiring manual recovery.\n\n"
 324 fi
 325
 326
 327 %files
 328 %defattr(-,root,root)
 329 /etc/init.d/openvswitch
 330 /etc/init.d/openvswitch-xapi-update
 331 /etc/xapi.d/plugins/openvswitch-cfg-update
 332 /etc/logrotate.d/openvswitch
 333 /etc/profile.d/openvswitch.sh
 334 /lib/modules/%{xen_version}/kernel/extra/openvswitch/openvswitch_mod.ko
 335 /lib/modules/%{xen_version}/kernel/extra/openvswitch/brcompat_mod.ko
 336 %if %(echo '%{xen_version}'|awk -F"." '{if ($3>=18) print 1; else print 0;}')
 337 /lib/modules/%{xen_version}/kernel/extra/openvswitch/ip_gre_mod.ko
 338 %endif
 339 %if %(echo '%{xen_version}'|awk -F"[.-]" '{if ($3==18) print 1; else print 0;}')
 340 /lib/modules/%{xen_version}/kernel/extra/openvswitch/veth_mod.ko
 341 %endif
 342 /usr/share/openvswitch/scripts/refresh-network-uuids
 343 /usr/share/openvswitch/scripts/interface-reconfigure
 344 /usr/share/openvswitch/scripts/InterfaceReconfigure.py
 345 /usr/share/openvswitch/scripts/InterfaceReconfigureBridge.py
 346 /usr/share/openvswitch/scripts/InterfaceReconfigureVswitch.py
 347 /usr/share/openvswitch/scripts/vif
 348 /usr/share/openvswitch/scripts/xen-bugtool
 349 /usr/share/openvswitch/scripts/brctl
 350 /usr/share/openvswitch/scripts/sysconfig.template
 351 /usr/share/openvswitch/vswitch.ovsschema
 352 /usr/sbin/ovs-brcompatd
 353 /usr/sbin/ovs-vswitchd
 354 /usr/sbin/ovsdb-server
 355 /usr/bin/ovs-appctl
 356 /usr/bin/ovs-dpctl
 357 /usr/bin/ovs-ofctl
 358 /usr/bin/ovs-vsctl
 359 /usr/bin/ovsdb-client
 360 /usr/bin/ovsdb-tool
 361 /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.py
 362 /usr/share/man/man1/ovsdb-client.1.gz
 363 /usr/share/man/man1/ovsdb-server.1.gz
 364 /usr/share/man/man1/ovsdb-tool.1.gz
 365 /usr/share/man/man5/ovs-vswitchd.conf.db.5.gz
 366 /usr/share/man/man8/ovs-appctl.8.gz
 367 /usr/share/man/man8/ovs-brcompatd.8.gz
 368 /usr/share/man/man8/ovs-dpctl.8.gz
 369 /usr/share/man/man8/ovs-ofctl.8.gz
 370 /usr/share/man/man8/ovs-vsctl.8.gz
 371 /usr/share/man/man8/ovs-vswitchd.8.gz
 372 /var/lib/openvswitch
 373 %exclude /usr/lib/xsconsole/plugins-base/*.pyc
 374 %exclude /usr/lib/xsconsole/plugins-base/*.pyo
 375 %exclude /usr/share/openvswitch/scripts/*.pyc
 376 %exclude /usr/share/openvswitch/scripts/*.pyo