2005-11-14 Paul Jakma <paul.jakma@sun.com>

[mirror_frr.git] / zebra / ChangeLog

2005-11-14 Paul Jakma <paul.jakma@sun.com>

        * zebra_rib.c: (rib_process) convert to new workqueue specs and
          shut up gcc, which complains about cast from void via
          function parameters, for some dumb reason. Do the cast
          inside the function instead.
          (rib_queue_qnode_del) ditto.
          (rib_queue_init) no need for the casts anymore.

2005-11-12 Alexander Gall <gall@switch.ch>

        * See [quagga-dev 1815]
        * kernel_socket.c: (rtm_write) Use SAROUNDUP when HAVE_SIN_LEN
          is not available.
        * rt_socket.c: (kernel_rtm_ipv6(_multipath)) set family to 
          AF_INET6 on ipv6 routes.

2005-11-12 Paul Jakma <paul.jakma@sun.com> 

        * kernel_socket.c: Add RTA_NAME_GET macro to extract name from
          sockaddr_dl. Add some more RTF_ flags.
        * (ifan_read) Add some debug messages.
        * (ifm_read) Add more debug messages. More robust cross-checks
          of index against name.
          Fall back to by-name lookup if the index lookup fails, future
          proofing more than anything else.
          (ifam_read_mesg) Read RTA_IFP. Add debug messages.
          (ifam_read) More debug. If there's an RTA_IFP and it isn't
          the name of the interface, save it as the label.
          (rtm_read_mesg) Read RTA_IFP.
          (rtm_read) allow name to be retrieved.
          (rtmsg_debug) expand on the debug message.

2005-11-11 Paul Jakma <paul.jakma@sun.com>

        * kernel_socket.c: (ifm_read) arithmetic on void pointer
          warning.
          (ifam_read) Fix error from connected-with-label merge,
          something crept in from the pending Solaris kernel_socket.c
          patch which shouldn't have.

2005-11-03 Paul Jakma <paul.jakma@sun.com>

        * connected.{c,h}: Include memory.h
          (connected_add_ipv4) Use MTYPE for ifc label.
          (connected_add_ipv6) Also should accept label. Store it in ifp.
          (connected_del_ipv4) Taking label as argument is pointless.
        * rt_netlink.c: (netlink_interface_addr) update label usage
          for connected_{add,delete} functions.
        * if_ioctl.c: (if_getaddrs) NULL label for connected_add_ipv6.
        * if_ioctl_solaris.c: (interface_list_ioctl) Pass LIFC_NOXMIT
          so we also find out about NOXMIT interfaces like VNI.
          Bit of hackery to turn interface names into the primary
          interface name, later with routing socket messages we only
          will about primary interfaces anyway, so we must normalise
          the name.
          (if_get_addr) take label as argument, so it can
          be passed to connected_add.
          If label is provided, then it is interface name to issue the
          ioctl for address information on, not the ifp name.
          (interface_list) List AF_UNSPEC too, just in case.
        * if_proc.c: (ifaddr_proc_ipv6) label for connected_add_ipv6.
        * interface.c: (if_addr_wakeup) Some very bogus code - sets
          IFF_RUNNING - add comment.
          (if_refresh)
          (ip_address_install) Use MTYPE for ifc label.
        * ioctl_solaris.c: (if_mangle_up) New function. Hackery to make
          IFF_UP reflect whether any addresses are left on the
          interface, as we get signalled for IFF_UP flags change on the 
          primary interface only. Logical interfaces dont generate
          IFINFO, but we do get an RTM_DELADDR.
          (if_get_flags) Call if_mangle_up before return.
        * kernel_socket.c: (ifam_read) Fixup calls to
          connected_{add,delete} to match above changes. Rename gate
          variable to brd, less confusing.
          Pass the interface name as a label, if it is not same name 
          as ifp->name.

2005-10-11 Paul Jakma <paul.jakma@sun.com>

        * connected.{c,h}: (connected_{add,delete}_ipv4) label should
          be const qualified.
        
2005-10-01 Andrew J. Schorr <ajschorr@alumni.princeton.edu>

        * zebra_vty.c: (route_type_str) Remove obsolete function: use new
          library function zebra_route_string() instead.  Note that there
          are a few differences: for IPv6 routes, we now get "ripng" and
          "ospf6" instead of the old behavior ("rip" and "ospf").
          (route_type_char) Remove obsolete function: ues new library function
          zebra_route_char() instead.  Note that there is one difference:
          the old function returned 'S' for a ZEBRA_ROUTE_SYSTEM route,
          whereas the new one returns 'X'.
          (vty_show_ip_route_detail,vty_show_ipv6_route_detail) Replace
          route_type_str() with zebra_route_string().
          (vty_show_ip_route,vty_show_ipv6_route) Replace route_type_char()
          with zebra_route_char().

2005-10-01 Andrew J. Schorr <ajschorr@alumni.princeton.edu>

        * rt_netlink.c: (netlink_request) Use memset to clear structure
          before calling sendto (eliminates a valgrind error message about
          uninitialized data).

2005-09-28 Alain Ritoux <alain.ritoux@6wind.com>

        * zserv.c: Always provied distance for route add

2005-09-28 Alain Ritoux <alain.ritoux@6wind.com>

        * connected.c: flag connected_up_ipv6() and connected_down_ipv6()
          usage with HAVE_IPV6

2005-09-24 Hasso Tepper <hasso at quagga.net>

        * rib.h: Add note about behaviour of rib_add_ipv[46]* functions -
          add is treated as implicit withdraw.

2005-09-21 David Young <dyoung@ojctech.com>

        * zebra_rib.c: Reduce the height of some staircases. Fix
          rib_delete_ipv6() to match routes in the RIB by their gateway as
          well as by destination.

2005-09-21 Paul Jakma <paul.jakma@sun.com>

        * zebra_rib.c: (static_uninstall_ipv{4,6}) Fix regression wrt
          removal of static routes with multiple-hops introduced with
          the workqueue conversion. We should free the relevant
          nexthop and then get rib_process to run, otherwise we just
          get same static route back again (with no way to unconfigure
          it, because its already deleted from configuration).
          
2005-09-12 Paul Jakma <paul.jakma@sun.com>

        * (general) RTM_CHANGE and implicit withdraw on RTM_NEWADDR
          support.
        * connected.c: (connected_withdraw) new function. withdraw a
          connected subnet address set from zebra, and pass information
          along to clients.
          (connected_announce) similar, but to announce a new connected
          subnet address set.
          (connected_check_ipv4) renamed to connected_check, as its
          AFI independent.
          (connected_add_ipv{4,6}) Remove the connected address announce
          stuff, use connected_announce instead.
          If connected_check indicates address is already present,
          treat it as an implicit withdraw of the existing address, ie
          remove the old address details and replace with the new
          details.
          (connected_delete_ipv{4,6}) Use connected_withdraw.
          (connected_check_ipv6) deleted in favour of connected_check.
        * connected.h: Rename connected_check_ipv4 to connected_check.
          delete connected_check_ipv6.
        * interface.c: Use connected_check rather than the AFI specific
          symbols.
        * kernel_socket.c: (rtm_read) RTM_CHANGE support. Create a 
          rib delete event for the existing route, before adding route
          again.
          (kernel_read) we can handle RTM_CHANGE now.

2005-08-27 Hasso Tepper <hasso at quagga.net>

        * zebra_rib.c, rib.h: Add distance and metric arguments to the
          rib_add_ipv6() function so that IPv6 routes in RIB can have correct
          metric. No IPv6 routing daemon uses distance yet though.
        * zserv.c, connected.c, kernel_socket.c, rt_netlink.c,
          rtread_proc.c,zserv.c: Pass metric and distance info to the
          rib_add_ipv6().

2005-07-29 Paul Jakma <paul.jakma@sun.com>

        * interface.c: (if_delete_update) should always be available, not
          just on RTM_IFANNOUNCE/NETLINK systems.
        * kernel_socket.c: (ifan_read) only call if_delete_update when
          interface departs, dont if_delete, because we wish to retain
          interface configuration state even when interfaces are removed.
          (ifm_read) If we dont have RTM_IFANNOUNCE, then transitioning
          to down state is only chance we have to clean up interface in case
          it is deleted (eg Solaris down -> unplumb -> plumb up).
        * redistribute.c: (zebra_interface_delete_update) should always be
          available, we /will/ call it now on all systems, via
          if_delete_update.
        * zserv.c: (zsend_interface_delete) ditto
          (zsend_interface_address) Update the call-flow diagramme, to
          reflect that if_delete_update /is/ now called on all systems,
          potentially.
        * zserv.h: (zsend_interface_delete) unconditionally exported, as
          above.
          
2005-06-28 Paul Jakma <paul.jakma@sun.com>

        * (global) Extern and static'ification, with related fixups
          of declarations, ensuring files include their own headers, etc.
        * if_ioctl.c: (interface_info_ioctl) fix obvious arg mis-order in
          list loop
        * kernel_socket.c: (RTA_{ADDR,ATTR}_GET) fix mistake, NULL check
          should be on DEST argument

2005-06-14 Paul Jakma <paul.jakma@sun.com>

        * kernel_socket.c: consolidate the IFAM{ADDR,MASK}GET and 
          RTM{ADDR,MASK}GET macros into generic rta_addrs macros,
          RTA_{ADDR,ATTR}_GET.
          (af_check) could use 'inline' attribute
          (ifam_read_mesg) remove IFAM{ADDR,MASK}GET macro, change to
          generic macro.
          (rtm_read_mesg) similar

2005-06-12 Hasso Tepper <hasso at quagga.net>

        * rt_netlink.c: Remove netlink-addr socket declaration, it's not used.
        * rt_netlink.c (netlink_parse_info): Fix debug messages - nlmsg_pid is
          unsigned and one zlog call had swapped arguments.
        * rt_netlink.c (netlink_route_multipath): Fix compile with disabled
          IPv6 support.

2005-05-31 Paul Jakma <paul.jakma@sun.com>

        * zserv.c: (zsend_route_multipath) Fix bug if route is sent
          with no NEXTHOP_FLAG_FIB nexthops. As ZAPI_MESSAGE_IFINDEX
          and ZAPI_MESSAGE_NEXTHOP are always set, clients would try
          read non-existent nexthop information and hit stream assert.
          Zserv is still broken for multi-nexthop messages, but it always was.

2005-05-06 Paul Jakma <paul.jakma@sun.com>

        * zserv.h: Remove ZEBRA_PORT definition, its in lib/zebra.h now

2005-04-28 Paul Jakma <paul.jakma@sun.com>

        * rib.h: (struct rib) Add lock field for refcounting.
        * zserv.h: (struct zebra_t) Add a ribq workqueue to the zebra
          'master' struct.
        * zserv.c: (zread_ipv4_add) XMALLOC then memset should be XCALLOC.
        * zebra_rib.c: Clean up refcounting of route_node, make struct rib
          refcounted and convert rib_process to work-queue. In general,
          rib's should be rib_addnode'd and delnode'd to route_nodes, and 
          these symmetrical functions will manage the locking of referenced
          route_node and freeing of struct rib - rather than having users
          manage each seperately - with much scope for bugs..
          (newrib_free) removed and replaced with rib_lock
          (rib_lock) new function, check state of lock and increment.
          (rib_unlock) new function, check lock state and decrement. Free
          struct rib if refcount hits 0, freeing struct nexthop's, as 
          newrib_free did.
          (rib_addnode) Add RIB to route_node, locking both.
          (rib_delnode) Delete RIB from route_node, unlocking each.
          (rib_process) Converted to a work-queue work function.
          Functional changes are minimal, just arguments, comments and 
          whitespace.
          (rib_queue_add_qnode) Helper function to setup a ribq item.
          (rib_queue_add) Helper function, same arguments as old
          rib_process, to replace in callers of rib_process.
          (rib_queue_qnode_del) ribq deconstructor.
          (rib_queue_init) Create the ribq.
          (rib_init) call rib_queue_init.
          (remainder) Sanitise refcounting of route_node's. Convert to 
          rib_queue_add, rib_addnode and rib_delnode. Change XMALLOC/memset
          to XCALLOC. Remove calls to nexthop_delete and nexthop_free.
          
2005-04-10 Paul Jakma <paul@dishone.st>

        * if_ioctl_solaris.c: (if_lookup_linklocal) fix order of args
          in ALL_LIST_ELEMENTS_RO macro.

2005-04-10 Andrew J. Schorr <ajschorr@alumni.princeton.edu>

        * zserv.c (zebra_client_read): Fix bug: first read attempt should
          read ZEBRA_HEADER_SIZE minus the number of bytes already read.
          Improve efficiency by maintaining a calculation of the number
          of bytes read instead of calling stream_get_endp multiple times.
          If message length is too small, issue a warning message (not debug)
          before closing the connection.  And also check that message length
          is not too big.

2005-04-09 Hasso Tepper <hasso at quagga.net>

        * rt_netlink.c: One tiny missing comma caused pointless debug messages
          about IPv6 nexthops.

2005-04-09 Hasso Tepper <hasso at quagga.net>

        * rt_netlink.c (netlink_parse_info): Fix warning. It's safe to cast
          status to unsigned here, because we already checked that it isn't
          negative or 0.
        * rt_netlink.c (netlink_interface_addr): Prefix length belongs to the
          address, not to the interface.
        * rt_netlink.c (netlink_route_multipath): Fix debug. No useless info
          is printed out now and IPv6 info is handeled.

2005-04-05 Paul Jakma <paul@dishone.st>

        * zserv.c: print more helpful errors when we fail to successfully
          bind and listen on zserv socket. Closes bugzilla #163.

2005-04-02 Andrew J. Schorr <ajschorr@alumni.princeton.edu>

        * if_ioctl.c: (interface_list_ioctl) Use if_get_by_name_len.
        * if_proc.c: (ifaddr_proc_ipv6) Increase size of ifname buffer to
          avoid overflow.
        * kernel_socket.c: (ifan_read) Use if_get_by_name_len.

2005-04-02 Andrew J. Schorr <ajschorr@alumni.princeton.edu>

        * kernel_socket.c: (ifm_read) Use new if_lookup_by_name_len function
          to save a memcpy.
        * if_ioctl_solaris.c: (interface_list_ioctl) Fix subtle bug with new
          if_get_by_name_len function.

2005-04-02 Andrew J. Schorr <ajschorr@alumni.princeton.edu>

        * interface.c: (if_new_intern_ifindex) Remove obsolete function.
          (if_delete_update) After distributing the interface deletion message,
          set ifp->ifindex to IFINDEX_INTERNAL.
          (if_dump_vty) Detect pseudo interface by checking if ifp->ifindex is
          IFINDEX_INTERNAL.
          (zebra_interface) Check return code from interface_cmd.func.
          Do not set internal ifindex values to if_new_intern_ifindex(),
          since we now use IFINDEX_INTERNAL for all pseudo interfaces.
        * kernel_socket.c: (ifm_read) Fix code and comments to reflect that
          all internal interfaces now have ifp->ifindex set to IFINDEX_INTERNAL.
        * rt_netlink.c: (set_ifindex) New function used to update ifp->ifindex.
          Detects interface rename events by checking if that ifindex is already
          being used.  If it is, delete the old interface before assigning
          the ifindex to the new interface.
          (netlink_interface, netlink_link_change) Call set_ifindex to update
          the ifindex.

2005-03-31 Hasso Tepper <hasso at quagga.net>

        * rt_netlink.c (netlink_talk_filter): Show always warning message,
          it's not for debug.
        * rt_netlink.c (netlink_talk): Don't assume we use netlink_cmd
          although we do now actually.
        * rt_netlink.c (netlink_route, netlink_route_multipath): Always use
          netlink_cmd to send messages to the kernel.

2005-03-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu>

        * irdp.h: Add prototype for irdp_sock_init, and fix protos for
          other irdp_* functions.
        * irdp_interface.c: (irdp_if_start) If irdp_sock is negative,
          call irdp_sock_init to create the IRDP socket.
          (irdp_if_init) Rename to irdp_init().
          (get_iflist_ifp) Remove function that is a duplicate of
          if_lookup_by_index.
          (*) Make many functions static.  And remove superfluous "\n" from
          several zlog messages.
        * irdp_main.c: (irdp_init) Remove function that used to call
          irdp_if_init() and irdp_sock_init(), since we will now create
          the socket only upon first use.
          (irdp_sock_init) Do not update global irdp_sock variable, just
          return the fd and assume that the caller will do so.  If setsockopt
          calls fail, close the socket before returning -1.
          (*) Make many functions static.
        * irdp_packet.c: Initialize irdp_sock to -1.
          (irdp_read_raw) Call standard library function if_lookup_by_index
          instead of get_iflist_ifp.
          (irdp_recvmsg) Should be static, not global.

2005-03-29 Andrew J. Schorr <ajschorr@alumni.princeton.edu>

        * rt_netlink.c: (netlink_link_change) If the status of an
          operative interface changes (e.g. MTU changes), the client
          daemons should be notified by calling zebra_interface_up_update.
          Previously, the information was being updated in zebra's
          interface structure, but the clients were not notified of
          changes to an operative interface.

2005-03-25 Jean-Mickael Guerin <jean-mickael.guerin@6wind.com>
        * interface.c, interface.h, rtadv.c, rtadv.h: modifications to 
          IPv6 Neighbor Discovery according to RFC3775, section 7:
          o 1-bit Home Agent flag management in Router Advertisement (7.1).
          o 1-bit Router Address flag management in Prefix Information 
            Option (7.2).
          o Advertisement Interval Option (7.3)
          o Home Agent Information Option (7.4)
          o Changes to Sending Router Advertisements more frequently (7.5)

2005-03-13 Hasso Tepper <hasso at quagga.net>

        * zebra/interaface.c: "show interface description" command
          implemented.

2005-03-12 Paul Jakma <paul@dishone.st>

        * rt_netlink.c: (netlink_route_multipath) dont set equalise flag.
          No stock Linux kernel has ever supported it, and even if it had
          it's not generally a good idea.

2005-03-07 Michael Sandee <voidptr@voidptr.sboost.org>

        * if_proc.c, ipforward_proc.c, rtread_proc.c: Fix fd leaks.

2005-03-06 Hasso Tepper <hasso at quagga.net>

        * interface.c: Fix CRC and frame errors statistics in Linux.

2005-02-28 Andrew J. Schorr <ajschorr@alumni.princeton.edu>

        * zserv.c: Must include network.h and buffer.h for non-blocking I/O.
          Remove global message_queue and t_write (need separate buffering for
          each client).
          (zebra_server_dequeue,zebra_server_enqueue) Remove functions
          related to old buggy buffering code.
          (zserv_delayed_close) New thread callback function to delete a client.
          (zserv_flush_data) New thread callback function to flush buffered
          data to client.
          (zebra_server_send_message) Rewritten to use buffer_write (so
          buffering of writes and non-blocking I/O work properly).
          (zsend_interface_add,zsend_interface_delete,zsend_interface_address,
          zsend_interface_update) Return 0 instead of -1 if !client->ifinfo
          (this is not really an error).  Return value from
          zebra_server_send_message.
          (zsend_route_multipath,zsend_ipv4_nexthop_lookup,
          zsend_ipv4_import_lookup) Return value from zebra_server_send_message.
          (zsend_ipv6_nexthop_lookup) Fix scope to static, and return value
          from zebra_server_send_message.
          (zsend_router_id_update) Must use zebra_server_send_message instead
          of deprecated writen function.  Return 0 instead of -1 if this client
          is not subscribed to router-id updates (since this is not really
          an error).
          (zread_interface_add) Change type to static int.  If
          zsend_interface_add fails or zsend_interface_address fails, return -1
          immediately (since the client has had an I/O error).
          (zread_interface_delete,zread_ipv4_add,zread_ipv4_delete,
          zread_ipv6_add,zread_ipv6_delete,zread_router_id_delete) Return 0
          to indicate success.
          (zread_ipv4_nexthop_lookup) Return value from
          zsend_ipv4_nexthop_lookup.
          (zread_ipv4_import_lookup) Return value from zsend_ipv4_import_lookup.
          (zebra_read_ipv6) Remove unused function.
          (zread_ipv6_nexthop_lookup) Return value from
          zsend_ipv6_nexthop_lookup.
          (zread_router_id_add) Return value from zsend_router_id_update.
          (zebra_client_close) Call buffer_free(client->wb) and
          thread_cancel(client->t_suicide).
          (zebra_client_create) Allocate client->wb using buffer_new.
          (zebra_client_read) Support non-blocking I/O by using stream_read_try.
          Use ZEBRA_HEADER_SIZE instead of 3.
          (zebra_accept) Fix bug: reset accept thread at top.  Make client
          socket non-blocking using the set_nonblocking function.
          (config_write_forwarding) Fix scope to static.
          (zebra_init) Remove initialization code for old buggy write buffering.
        * zserv.h: Add 2 new fields to struct zserv: struct buffer *wb
          (to enable buffered writes with non-blocking I/), and 
          struct thread *t_suicide to support delayed close on I/O
          errors.
        * router-id.h: Remove prototypes for zread_router_id_add and
          zread_router_id_delete (their scope should be static to zserv.c).

2005-02-24 Andrew J. Schorr <ajschorr@alumni.princeton.edu>

        * redistribute.c: (zebra_check_addr,is_default,
          zebra_redistribute_default,zebra_redistribute) Fix scope to be static.

2005-02-20 Hasso Tepper <hasso at quagga.net>

        * rt_netlink.c: Don't show messages "ignoring message type 0x001[89]"
          if we are not debugging.

2005-02-19 Paul Jakma <paul@dishone.st>

        * zserv.c: (zebra_read_ipv6) replace the char * arithmetic with
          STREAM_READABLE.

2005-02-14 Paul Jakma <paul@dishone.st>

        * Not all Linux netlink systems have IFLA_WIRELESS

2005-01-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu>

        * ioctl.c: (if_ioctl,if_ioctl_ipv6,if_get_flags) Replace perror with
          zlog_err.
        * ioctl_solaris.c: (if_ioctl,if_ioctl_ipv6) Replace perror with
          zlog_err.

2005-01-29 Andrew J. Schorr <ajschorr@alumni.princeton.edu>

        * if_ioctl_solaris.c: (interface_list_ioctl) Save errno before calling
          zserv_privs.change.
        * ioctl{,_solaris}.c: (if_ioctl,if_ioctl_ipv6) Save errno before calling
          zserv_privs.change.
        * ipforward_solaris.c: (solaris_nd) Save errno before calling
          zserv_privs.change.
        * irdp_main.c: (irdp_sock_init) Save errno before calling
          zserv_privs.change.

2005-01-29 Andrew J. Schorr <ajschorr@alumni.princeton.edu>

        * rt_netlink.c: (netlink_socket,netlink_request,netlink_parse_info,
          netlink_talk) Save errno before calling zserv_privs.change.

2005-01-24 Martin Pot <mpot at martybugs.net>

        * zebra/rt_netlink.c: ignore wireless newlink netlink messages.

2005-01-18 Hasso Tepper <hasso at quagga.net>

        * interface.c: Better statistics output in "show interface" command in
          case of /proc being used.

2005-01-17 Hasso Tepper <hasso at quagga.net>

        * main.c: With --nl-bufsize argument is required.

2005-01-05 Paul Jakma <paul@dishone.st>

        * zserv.c: (zebra_accept) Comment out setting of socket to NONBLOCK
          for now, as we dont actually deal with with resending.... See
          bugzilla #122, fix from wawa@yandex-team.ru (Vladimir Ivanov).
        * kernel_socket.c: (routing_socket) ditto.

2005-01-04 Andrew J. Schorr <ajschorr@alumni.princeton.edu>

        * rtadv.c: (rtadv_recv_packet,rtadv_send_packet) Use ZCMSG_FIRSTHDR
          instead of CMSG_FIRSTHDR.

2004-12-22 Andrew J. Schorr <ajschorr@alumni.princeton.edu>

        * connected.c: (connected_add_ipv4) Limit warning about /32 addresses
          with no peer specified to PtP interfaces only.

2004-12-18 Hasso Tepper <hasso at quagga.net>

        * zebra_vty.c: Fix "show ipv6 route <proto>" command help and make it
          work for isis routes.

2004-12-09  Greg Troxel  <gdt@fnord.ir.bbn.com>

        * kernel_socket.c (rtmsg_debug): char * => const char *

2004-12-07 Andrew J. Schorr <ajschorr@alumni.princeton.edu>

        * *.c: Change level of debug messages to LOG_DEBUG.

2004-12-07 Andrew J. Schorr <ajschorr@alumni.princeton.edu>

        * main.c: (main) The 2nd argument to openzlog has been removed.
          So stdout logging will no longer be enabled by default.
        * irdp_main.c: (irdp_finish) Reduce severity of shutdown message
          from LOG_WARNING to LOG_INFO.

2004-12-03 Andrew J. Schorr <ajschorr@alumni.princeton.edu>

        * main.c: (sigint) Use zlog_notice for termination message.
          (main) Add a startup announcement using zlog_notice.

2004-11-25 Hasso Tepper <hasso at quagga.net>

        * irdp_interface.c: Remove comment from DEFUN, it breaks vtysh because
          it confuses extract.pl.
        * main.c: Make group to run as configurable.

2004-10-28 Hasso Tepper <hasso at quagga.net>

        * interface.c: Remove dead "ip tunnel" command.

2004-10-22 Paul Jakma <paul@dishone.st>

        * irdp_main.c: change setsockopt_pktinfo to setsockopt_ifindex

2004-10-19 Andrew J. Schorr <aschorr@telemetry-investments.com>

        * rt_netlink.c: (netlink_interface_addr) For PtP interfaces, ignore
          tb[IFA_ADDRESS] if it's the same as tb[IFA_LOCAL].
        * interface.c: (ip_address_install) Use new ipv4_broadcast_addr
          function.
        * connected.c: (connected_up_ipv4) Use CONNECTED_POINTOPOINT_HOST
          macro.
          (connected_down_ipv4) ditto.
          (connected_add_ipv4) Validate destination address, print warnings
          if it does not make sense.

2004-10-19 Hasso Tepper <hasso at quagga.net>

        * zserv.c: Fix regression introduced with zserv cleanup.

2004-10-13 Hasso Tepper <hasso at quagga.net>

        * zebra_snmp.c: Remove defaults used to initialize smux connection to
          snmpd. Connection is initialized only if smux peer is configured.
        * zserv.c: Remove useless warnings "forwarding is already on".

2004-10-12 Hasso Tepper <hasso at quagga.net>

        * zebra_vty.c: Unbreak "show ip route" command help and make it work
          for isis routes.
        * interface.c(if_dump_vty): Show IPv6 addresses in "show interface"
          output. Fixes Bugzilla #119.
        * *.c: Make some strings const and some (unsigned) casts to fix
          compiler warnings.

2004-10-07 Hasso Tepper <hasso at quagga.net>

        * connected.c, main.c, rt_netlink.c, rtadv.c, zebra_rib.c, zserv.c:
          Fix warnings: make strings const, signed -> unsigned.

2004-10-05 Paul Jakma <paul@dishone.st>

        * irdp_packet.c: (parse_irdp_packet) style issues.
          Use sockopt_iphdrincl_swab_systoh.
          Try unbork the code. Checksum the ICMP data and actually 
          compare it to received checksum. Check data length against
          claimed length in header.
          Always use ntoh.. when accessing addresses, even when the
          comparison happens to be endian-safe.
          (send_packet) minor style isues. Use
          sockopt_iphdrincl_swab_htosys.
          (irdp_iph_hton/ntoh) IP header to/from network/host order.

2004-10-03 Gilad Arnold <gilad.arnold at terayon.com>

        * interface.c, interface.h: A new prefix tree of connected subnets is
          associated with each interface structure in zebra, in which each
          live (ie, non-synthetic) node holds a list of installed addresses
          that belong to that prefix. Remove secondary address logic from cli.
          See [quagga-dev 872] for detailed explanation.
        * connected.c: Use if_subnet_add() and if_subnet_delete().

2004-10-03 James R. Leu <jleu at mindspring.com>

        * router-id.c, router-id.h: New files. Router id selection process. If
          there is non 127.x.x.x address in loopack interface, lowest of them
          is chosen. If there isn't, lowest from other interfaces addresses
          are chosen. "router-id x.x.x.x" vty command to manual override.
        * Makefile.am: Compile new files.
        * main.c: Initialize router id.
        * redistribute.c: Add interface addresses into router id selection
          lists as they (dis)appear.
        * zserv.c, zserv.h: Sending router id related messages to daemons.

2004-09-26 Hasso Tepper <hasso at quagga.net>

        * irdp_interface.c, irdp_main.c, irdp_packet.c, rt_netlink.c,
          rtadv.c, zebra_vty.c: Fix compiler warnings.

2004-09-24 Paul Jakma <paul@dishone.st>

        * irdp_interface.c: (no_ip_irdp_address_preference_cmd)
          add missing listnode declaration.

2004-09-24 Paul Jakma <paul@dishone.st>

        * irdp_{interface,main}.c: lists typedef removal cleanup.        
          update some list loops to LIST_LOOP. some miscellaneous style
          and indent fixups.
          (no_ip_irdp_address_preference_cmd) Fix delete of referenced node    
          in loop.
        * irdp_packet.c: (irdp_recvmsg) Fix buggy assignment of integer
          to pointer.
        * if_ioctl{,_solaris}.c: lists typedef removal cleanup. 
          update some list loops to LIST_LOOP.

2004-09-23 Hasso Tepper <hasso at quagga.net>

        * *.[c|h]: list -> struct list *, listnode -> struct listnode *.

2004-09-22 Paul Jakma <paul.jakma@sun.com>

        * zserv.c: (zsend_route_multipath) fix nasty bad memset of struct
          in_addr to sizeof(struct in6_addr), causing odd and hard to debug
          crash.

2004-08-31 Hasso Tepper <hasso at quagga.net>

        * main.c, rt_netlink.c: Added -s command line switch for tuning
          netlink receive buffer size in Linux to avoid buffer overruns.

2004-08-26  Miles Nordin  <carton@Ivy.NET>

        * ipforward_sysctl.c (mib_ipv6): Use size_t for len, per
          sysctl(3), rather than int.  (Needed on NetBSD/alpha to display
          forwarding status correctly.)

2004-08-23 Paul Jakma <paul@dishone.st>

        * zserv.c: (zebra_init) remove implicit ip forward enabling
        
2004-08-19 Paul Jakma <paul@dishone.st>

        * irdp_main.c: update to match sockopt renames.
        * irdp_packet.c: include sockopt.h and update to match sockopt
          renames.
                
2004-08-11  Greg Troxel  <gdt@fnord.ir.bbn.com>

        * rtadv.c (rtadv_send_packet): Allocate space for control messages
        more carefully; it was wrong on NetBSD/sparc where CMSG alignment
        is to 8 bytes instead of 4, and overwriting the address.  Use the
        provided macros for determining lengths.

2004-07-23 Sowmini Varadhan <Sowmini.Varadhan@Sun.COM>

        * if_ioctl_solaris.c: HAVE_IPV6 ifdef fixups
        * zserv.c: ditto
        * ioctl_solaris.c: ditto.
        * interface.c: cast for LLADDR
        * interface.h: Add guards, include redistribute.h and remove
          extraneous definitions of zebra_interface_{up,down}_update
        * ioctl.h: Add AF_IOCTL define for non SOLARIS_IPV6
        * redistribute.h: include dependent header, zserv.h
        * zserv.h: include dependent header, rib.h

2004-07-23 Paul Jakma <paul@dishone.st>

        * irdp_main.c: use setsockopt_pktinfo_ipv4
        * irdp_packet.c: use SOPT_SIZE_CMSG_PKTINFO_IPV4 and 
          getsockopt_pktinfo_ifindex()

2004-07-13  David Wiggins <dwiggins@bbn.com

        * kernel_socket.c (rtm_flag_dump): terminate buffer with '\0', not '0'.

2004-07-13 Hasso Tepper <hasso@estpak.ee>

        * irdp_main.c: Add privilege change.

2004-07-12  Hasso Tepper <hasso@estpak.ee>

        * irdp_interface.c: follow common style while naming vty command
          functions. Avoids confusion in extract.pl.

2004-06-30  Greg Troxel  <gdt@poblano.ir.bbn.com>

        * main.c: define thread_master variable so that linking with
        libzebra.so doesn't fail.  Arguably zclient.o should be in a
        separate library, but this is far less disruptive.

2004-06-12 Robert Olsson <Robert.Olsson at data.slu.se>

        * Added IRDP support.

2004-05-18 Hasso Tepper <hasso@estpak.ee>

        * rtadv.c: Removed "[no] ipv6 nd send-ra" command. Replaced "ipv6 nd
          prefix-advertisement" with "ipv6 nd prefix". Rewrite syntax of
          "ipv6 nd prefix" command to allow various combinations of parameters
          and flags. No defaults in configuration. Replaced on-link and
          autoconfig with off-link and no-autoconfig flags in command syntax.
          Cosmetic fixes in all commands. Documentation to reflect all changes.

2004-05-11 Paul Jakma <paul@dishone.st>

        * Makefile.am: support for IOCTL_METHOD, as per Sowmini's patch.
        * if_ioctl_solaris.c: Fixup some erroneous privilege changes and
          add privs.h header.
        * ioctl_solaris.c: ditto
        * ioctl.h: Add if_ioctl_ipv6 prototype and AF_IOCTL for SOLARIS_IPV6
        * kernel_socket.c: Fix SAROUNDUP, compiler doesnt like do..while
          RHS in assignments :)
        * redistribute.c: (zebra_interface_delete_update) only used
          if RTM_IFANNOUNCE and NETLINK is available.
                 
2004-05-09 Paul Jakma <paul@dishone.st>

        * zserv.c: (zsend_route_multipath) Set the nexthop_num
          field correctly. Add NEXTHOP_TYPE_IPV6_IFNAME for v6.
          Conditionally set ZAPI_MESSAGE_METRIC flag - only for adds.
          (zsend_ipv4_add) cruft, deleted.
          (zsend_ipv4_delete) ditto.
          (zsend_ipv6_add) ditto.
          (zsend_ipv6_delete) ditto.
        * ioctl.c: (if_get_mtu) set mtu6 to mtu
        * mtu_kvm.c: (if_kvm_get_mtu) set mtu6 to mtu
        * rt_netlink.c: (netlink_interface) set mtu6 to mtu
          (netlink_link_change) ditto 
        * ipforward_solaris.c: fix typo of ND variable.
        * if_ioctl_solaris.c: Add zprivs support.
        * ioctl_solaris.c: ditto.
                  
2004-05-09 Sowmini Varadhan <sowmini.varadhan@sun.com>

        * zserv.c: (zsend_ipv{4,6}_{add,delete}_multipath) collapsed
          into single zsend_route_multipath function.
          (zsend_interface_{up,down}) collapsed into zsend_interface_update.
          (zsend_interface_address_{add,delete}) collapsed into 
          zsend_interface_address.
          (zsend_interface_add) send mtu6.
          (zsend_interface_delete) ditto.
          (zebra_write) remove unused function.
          (various) Apply static qualifier. Add comments.
        * zserv.h: Definitions changed as per above.
        * redistribute.c: Changes as per zserv.c.
        * interface.c: (if_delete_update) only used with HAVE_NETLINK
          and RTM_IFANNOUNCE.
          (if_flag_dump_vty) Solaris IFF_IPV4 and IFF_IPV6 if flags
          (if_dump_vty) print mtu6 if not same as mtu     
        * if_ioctl_solaris.c: New file, Solaris interface ioctl methods.
        * ioctl_solaris.c: New file, Common solaris ioctl methods.
        
2004-04-06  Krzysztof Oledzki <oleq@ans.pl>

        * rt_netlink.c: Do not ignore metric when reading kernel routing
          table on Linux with rt_netlink interface.

2004-03-18  Hasso Tepper <hasso@estpak.ee>

        * interface.c: Temporary fix for handling secondary addresses
          with label.

2004-02-12  Hasso Tepper  <hasso@estpak.ee>

        * zserv.c: Added "ipv6 forwarding" command.

2004-01-08  Greg Troxel  <gdt@fnord.ir.bbn.com>

        * kernel_socket.c (kernel_read): Use sockaddr_storage in buffer
        for reading kernel messages to ensure enough space (necessary on
        Solaris due to sockaddr_dl being large).  Thanks to Sowmini
        Varadhan for help with this change.

2004-01-06  Greg Troxel  <gdt@t1.ir.bbn.com>

        * rtadv.c (rtadv_send_packet): Change perror to zlog_err.

2004-01-05  Greg Troxel  <gdt@fnord.ir.bbn.com>
        * kernel_socket.c (ifm_read): Major cleanup.  Use Sowmini's code
        to find the sockaddr_dl in all cases, narrowing the Solaris ifdef
        to just the accomodation of broken kernels.  Check sockaddr_dl
        carefully up front, and later assume any non-NULL sdl pointer is
        valid.  Clean up types and variable declarations, and rename
        WRAPUP to SAROUNDUP to make the name fit the behavior.

2004-01-05  Greg Troxel  <gdt@fnord.ir.bbn.com>

        * kernel_socket.c (kernel_read): Add a sockaddr_dl to the ifmsg
        structure, because on Solaris sockaddr_dl is far larger than the
        base sockaddr structure.  (The code had previously been failing to
        read all the data.)
        
2004-01-05  Greg Troxel  <gdt@ahi.ir.bbn.com>

        * kernel_socket.c (kernel_read): Look up interfaces by index
        first, so that state changes which do not include a sockaddr_dl
        now work.  Add many sanity checks.  In
        particular, do not assume that a sockaddr_dl follows a message
        without checking the ifm_addrs flags, and do not trust the length
        in a sockaddr_dl.  Add/clarify many comments.

2003-12-03  Greg Troxel  <gdt@poblano.ir.bbn.com>

        * rtadv.c: reorder includes to avoid compiler warning (define
        structs before using them in prototypes)

2003-05-25 Jim Crumpler <Jim.Crumpler@edion.com>

  * zserv.c: Add "ip forwarding" command.

2003-05-16 Gilad Arnold <gilad.arnold@terayon.com>

        * zebra_rib.c: Fix memory leaks for ifname nexthops

2003-04-19 Israel Keys <ikeys@agile.tv>

        * rt_netlink.c: BLOCK on netlink while initialising

2003-02-06  Francois Deppierraz <francois@ctrlaltdel.ch>

        * rt_netlink.c (netlink_route_multipath): Set RTM_F_EQUALIZE when
        it exists.

2002-09-28  Akihiro Mizutani <mizutani@net-chef.net>

        * zebra_rib.c (static_add_ipv4): Null0 static route is added.

2002-09-10  Jochen Friedrich <chris+zebra@scram.de>

        * rt_netlink.c: Add check for EAGAIN.
        * kernel_socket.c: Likewise

2002-06-12  Israel Keys <ikeys@oz.agile.tv>

        * rt_netlink.c: Setting the NLM_F_ACK flag on the netlink command
          message so that we get an ACK for successful netlink commands.
          Change the netlink socket to BLOCKING while we wait for a
          response; be it an ACK or an NLMSG_ERROR.  Change
          netlink_parse_info to deal with ACK messages.

2001-11-01  Jun-ichiro itojun Hagino <itojun@iijlab.net>

        * rtadv.c (rtadv_make_socket): setsockopt(IPV6_CHECKSUM) does not
        work for ICMPv6 socket.

2001-10-24  Kunihiro Ishiguro  <kunihiro@ipinfusion.com>

        * rib.c (rib_process): Select connected route any case.

2001-10-23  Kunihiro Ishiguro  <kunihiro@ipinfusion.com>

        * interface.c (no_ip_address_secondary): Add "no" to command.

2001-10-18  NOGUCHI Kay  <kay@v6.access.co.jp>

        * ioctl.c (if_prefix_add_ipv6): Set the prefered and valid lifetime
        to infinity as the freebsd4.4 workaroud.

2001-08-26  mihail.balikov@interbgc.com

        * zebra_snmp.c: Fix snmpwalk problem such as IPv4 address
        A.B.C.255.

2001-08-22  NOGUCHI Kay <kay@v6.access.co.jp>

        * rtadv.c: Do not send RA to loopback interface.

2001-08-20  Kunihiro Ishiguro  <kunihiro@ipinfusion.com>

        * ioctl.c (if_set_prefix): Remove Linux 2.0 specific connected
        route treatment.

2001-08-19  Kunihiro Ishiguro  <kunihiro@ipinfusion.com>

        * zebra-0.92a released.

2001-08-17  Kunihiro Ishiguro  <kunihiro@ipinfusion.com>

        * rib.c: Kernel route is treated as EGP routes in nexthop active
        check.

2001-08-15  Kunihiro Ishiguro  <kunihiro@ipinfusion.com>

        * zebra-0.92 released.

2001-08-08  "Akihiro Mizutani" <mizutani@dml.com>

        * rib.c (show_ip_route_prefix_longer): Add longer-prefix option to
        show route commands.

2001-07-29  Yon Uriarte <havanna_moon@gmx.net>

        * zserv.c (zsend_ipv4_add_multipath): Add
        NEXTHOP_TYPE_IPV4_IFINDEX check.

2001-07-29  NOGUCHI Kay <kay@v6.access.co.jp>

        * rtadv.c: Apply valid lifetime, preferred lifetime, onilnk flag,
        autonomous address-configuration flag patch.
        (no_ipv6_nd_suppress_ra): Change "ipv6 nd send-ra" to "no ipv6 nd
        suppress-ra".

2001-07-24  NOGUCHI Kay <kay@v6.access.co.jp>

        * rtadv.c (ipv6_nd_ra_interval): Add "ipv6 nd ra-interval SECONDS"
        command.

2001-07-24  Jun-ichiro itojun Hagino <itojun@iijlab.net>

        * rt_socket.c (kernel_rtm_ipv4): Add KAME/NetBSD151 equal cost
        multicast FIB support both IPv4 and IPv6.

2001-07-24  Hal Snyder <hal@vailsys.com>

        * if_ioctl.c (interface_list_ioctl): Fix bug of failing to get the
        full list of interfaces on some configurations of OpenBSD.

2001-07-23  NOGUCHI Kay <kay@v6.access.co.jp>

        * rtadv.c (ipv6_nd_send_ra): Apply [zebra 9320] to fix "ipv6 nd
        send-ra" bug.
        (ipv6_nd_ra_lifetime): "ipv6 nd ra-lifetime 0" for default router
        availability.
        (ipv6_nd_managed_config_flag): "ipv6 nd managed-config-flag" is
        added.
        (ipv6_nd_other_config_flag): "ipv6 nd other-config-flag" is added.
        
2001-07-23  Jun-ichiro itojun Hagino <itojun@iijlab.net>

        * ioctl.c (if_ioctl): Change ioctl argument from int to u_long.

        * rt_ioctl.c: Likewise.

2001-07-23  Jun-ichiro itojun Hagino <itojun@iijlab.net>

        * kernel_socket.c (rtm_write): Only set RTF_CLONING when the
        interface is not p2p.

2001-04-23  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * ioctl.c (if_prefix_add_ipv6): Fix argument type.

2001-04-06  Toshiaki Takada  <takada@zebra.org>

        * zserv.c (zsend_interface_delete): Use client->obuf instead of
        allocating new stream.

2001-03-10  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * rt_netlink.c: Revert RTPROT_BOOT change.

2001-03-08  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * rt_netlink.c (netlink_route_change): Skip RTPROT_BOOT route.
        (netlink_routing_table): Likewise.

2001-03-07  "Akihiro Mizutani" <mizutani@dml.com>

        * zserv.c (zsend_ipv4_add_multipath): Send metric value to
        protocol daemons.

2001-02-18  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * rt_netlink.c (netlink_routing_table): Do not return
        tb[RTA_GATEWAY] is NULL.  Reported by: "Michael O'Keefe"
        <mokeefe@qualcomm.com>.

2001-02-08  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * if_ioctl.c (interface_list_ioctl): Call if_add_update().
        Suggested by: Chris Dunlop <chris@onthe.net.au>.

2001-02-01  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * rib.c (nexthop_active_ipv4): When nexthop type is
        NEXTHOP_TYPE_IPV4_IFINDEX, propery set the ifindex to rifindex.

        * zserv.c: Initialize rtm_table_default with 0.

        * zebra-0.91 is released.

2001-01-31  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * kernel_socket.c (rtm_read): Filter cloned route.  Suggested by:
        Jun-ichiro itojun Hagino <itojun@iijlab.net>

2001-01-30  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * connected.c (connected_up_ipv6): When point-to-point destination
        address is ::, use local address for connected network.
        (connected_down_ipv6): Likewise.

2001-01-25  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * zserv.c (zebra_serv): Add missing close() call.  Reported by:
        David Waitzman <djw@vineyard.net>.

2001-01-24  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * rib.c (rib_lookup_ipv4): New function for checking exact match
        IGP route.

2001-01-23  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * rib.c (show_ipv6_route_protocol): Fix bug of "show ip route
        route-type".

2001-01-22  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * interface.c (zebra_interface): Do not call
        zebra_interface_add_update for inactive interface.

        * zserv.c (zsend_interface_address_add): Send interface address
        flag.
        (zsend_interface_address_delete): Likewise.

2001-01-19  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * interface.c (if_addr_add):  Add flags.

        * connected.c (ifa_add_ipv4): Add new function for interface
        address handling.
        (ifa_delete_ipv4): Likewise.

2001-01-16  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * rib.c (rib_update): Update IPv6 RIB.

        * kernel_socket.c (ifam_read): Call if_refresh() for update
        interface flag status.  This is for implicit interface up on *BSD.

        * interface.c (if_refresh): Add interface flag refresh function.

        * kernel_socket.c (rtm_read): Fetch link-local address interface
        index.
        (ifan_read): We need to fetch interface information.  Suggested
        by: Yasuhiro Ohara <yasu@sfc.wide.ad.jp>.

        * rib.c (static_ipv6_nexthop_same): Add check for
        NEXTHOP_TYPE_IPV6_IFNAME.

2001-01-15  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * rib.h (NEW_RIB): Turn on NEW_RIB flag.  IPv6 new RIB code are
        taken into place.

2001-01-14  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * rib.c (static_ipv6_write): Display STATIC_IPV6_GATEWAY_IFNAME
        configuration.
        (rib_delete_ipv6): Handle same route conter for IPv6 connected
        route.
        (show_ipv6_route_protocol): New command.
        (show_ipv6_route_addr): Likewise.
        (show_ipv6_route_prefix): Likewise.
        (rib_update): Sweep kernel route when it is cleaned up.

        * rt_socket.c (kernel_add_ipv6): Add NEXTHOP_IPV6_IFNAME
        treatmenet.

        * rt_netlink.c (kernel_init): Likewise.

        * rt_ioctl.c (kernel_ioctl_ipv6_multipath): Likewise.

        * rib.c (rib_add_ipv4): Cope with same connected route on a
        interface.  Suggested by: Matthew Grant <grantma@anathoth.gen.nz>.
        (nexthop_ipv6_ifname_add): Add NEXTHOP_IPV6_IFNAME treatmenet.

        * rib.h (struct new_rib): Add refcnt to keep track on the
        reference of same connected route.

        * ioctl.c (if_set_prefix): Add check for GNU_LINUX.

2001-01-13  Yasuhiro Ohara <yasu@sfc.wide.ad.jp>

        * kernel_socket.c (ifan_read, rtm_type_str): Add RTM_OIFINFO check.
        (rtm_type_str): Add RTM_IFANNOUNCE check.
        (ifan_read): New function.
        (kernel_read): Add case for RTM_IFANNOUNCE.

2001-01-13  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * rt_ioctl.c (kernel_ioctl_ipv6_multipath): New function.

        * rt_netlink.c (netlink_route_multipath): IPv6 address ifindex
        treatment.

        * connected.c (connected_up_ipv6): Add dest value check.

        * rib.c (nexthop_active_ipv6): Do not touch IPv6 nexthop's
        ifindex.
        (rib_add_ipv4): Import rib_add_ipv6() same route check code.
        (nexthop_active_check): NEXTHOP_TYPE_IPV6_IFINDEX activity is only
        checked by ifindex.

        * rt_socket.c (kernel_rtm_ipv6_multipath): New function.

        * redistribute.c (redistribute_add): Use
        zsend_ipv6_add_multipath().
        (redistribute_delete_multipath): Use
        zsend_ipv6_delete_multipath().

        * interface.c (ip_address): Check current IP address to avoid
        duplicate.

        * rib.c (rib_delete_ipv4): When deleted route is connected route,
        check ifindex.
        (rib_add_ipv4): When connected route is added do not perform
        implicit withdraw.
        (rib_delete_ipv4): Check ifindex for connected route.

        * kernel_socket.c (rtm_read): When route has RTF_STATIC, set
        ZEBRA_FLAG_STATIC for indicate as persistent route.
        (ifam_read): Unset interface index from link-local address when
        IPv6 stack is KAME.

        * rib.c (rib_update): Do not delete persistent kernel route.

        * rib.h (struct new_rib): Integrate RIB_FLAG_* to ZEBRA_FLAG_*.

        * rt_socket.c (kernel_add_ipv6_multipath): Add placeholder.
        (kernel_delete_ipv6_multipath): Likewise.

        * rt_netlink.c (netlink_talk): Give struct nlsock to netlink_talk.

2001-01-12  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * rib.c (rib_update): Revert Matthew Grant's patch
        zebra_cvs_newribfix.patch.  Use struct rib->ifindex for kernel
        interface index.  Introduce NEXTHOP_TYPE_IPV4_IFINDEX to support
        that.  Add support for address deletion situation.

2001-01-11  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * interface.c: Remove HAVE_IF_PSEUDO part.

        * rib.h: Likewise.

        * rt_netlink.c (netlink_link_change): Likewise.

2001-01-10  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * zserv.c: Remove OLD_RIB codes.

2001-01-09  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * zebra-0.90 is released.

2001-01-09  Matthew Grant <grantma@anathoth.gen.nz>

        * interface.c (if_new_intern_ifindex): Allocate a new internal
        interface index.
        (if_addr_refresh): Fix up ip addresses configured via zebra.
        (if_add_update): Handle an interface addition.
        (if_delete_update): Handle an interface delete event.

        * rib.c (nexthop_ipv4_add): Add kernel route deletion process when
        interface goes down.

2001-01-08  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * interface.c (if_dump_vty): When HAVE_NET_RT_IFLIST is defined,
        NetBSD also use this function.  Suggested by Jasper Wallace
        <jasper@ivision.co.uk>.

2001-01-07  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * rib.c (nexthop_active_ipv4): Move back to set methodo to old
        one.

2001-01-05  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * rib.c (rib_add_ipv4): EBGP multihop set ZEBRA_FLAG_INTERNAL
        flag, so treat it.

2001-01-04  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * rt_netlink.c (netlink_talk_ipv6): When IPv6 route message is
        sent from netlink_cmd, the same message comes from netlink.  To
        avoid confusion, temporary netlink_talk_ipv6 use netlink.sock
        instead of netlink_cmd.sock.

2001-01-01  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * zserv.h (ZEBRA_SERV_PATH): Change "/tmp/zebra" to "/tmp/.zebra".
        Change "/tmp/zserv" to "/tmp/.zserv".
        
2000-12-29  Frank van Maarseveen <F.vanMaarseveen@inter.NL.net>

        * rt_netlink.c (struct nlsock): Divide kernel message into listen
        socket and command socket.
        (netlink_talk): Remove socket listen code.  Use netlink_parse_info
        for read kernel response.

2000-12-29  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * rib.c (vty_show_ip_route): Show uptime of the RIP,OSPF,BGP
        routes.

2000-12-27  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * rt_netlink.c (netlink_route_multipath): Metric value is
        reflected to kernel routing table.

        * rt_ioctl.c (kernel_ioctl_ipv4_multipath): Likewise.

        * kernel_socket.c (rtm_write): Likewise.

        * rib.c (nexthop_active_ipv4): Only iBGP route perform recursive
        nexthop lookup.

        * rt_ioctl.c (kernel_ioctl_ipv4_multipath): Add ioctl version of
        new RIB implementation.

2000-12-26  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * rib.h: Remove MULTIPATH_NUM.  It is defined by configure script.

2000-12-25  Michael Rozhavsky <mrozhavsky@opticalaccess.com>

        * rib.c (rib_if_up): Call rib_fib_set instead of RIB_FIB_SET for
        proper redistribution.

2000-12-19  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * rib.c (nexthop_active_ipv4): Add self lookup nexthop check.
        (show_ip_route_protocol): Support new RIB.

        * rt_netlink.c (netlink_route_change): Do not return when gate is
        NULL.

2000-12-18  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * rib.c (rib_lookup_ipv4_nexthop): IBGP nexthop check function is
        updated.
        (rib_add_ipv4): Free implicit withdraw route's RIB.

2000-12-15  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * rib.c (nexthop_active_ipv4): Check indirect nexthop.

        * redistribute.c (redistribute_add_multipath): Redistribution
        works with new rib code.

2000-12-14  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * rt_netlink.c (netlink_route_multipath): Check useful nexthop
        number.
        (netlink_route_multipath): Clear rtnh_flags and rtnh_hops.

        * rib.c (nexthop_active_update): Set flag for the rib's nexthop
        activity is changed.
        (nexthop_active_check): Before checking interface is up, make it
        sure the interface exist.

2000-11-20  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * rib.c (ip_route): New RIB prototype.

2000-11-16  Yon Uriarte <ukl2@rz.uni-karlsruhe.de>

        * zserv.c (zsend_interface_add): Send hardware address when
        hw_addr_len is greater than 0.

2000-11-07  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * connected.c (connected_up_ipv4): Fix ptop bug.  The destination
        network should be installed into routing table.
        (connected_down_ipv4): Likewise.
        (connected_add_ipv4): Change to use connected_up_ipv4.
        (connected_delete_ipv4): Likewise.

2000-11-06  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * rt_netlink.c (netlink_interface_addr): Revert Harald Welte
        <laforge@gnumonks.org>'s ptop patch then back to original code to
        avoid duplicated connected route problem.  Suggested by Frank van
        Maarseveen <F.vanMaarseveen@inter.NL.net>.

        * kernel_socket.c (rtm_read): Make behavior consistent even #ifdef
        DEBUG is defined.  Reported by Jun-ichiro itojun Hagino
        <itojun@iijlab.net>.

2000-10-23  Jochen Friedrich <jochen@scram.de>

        * main.c (main): Call zebra_snmp_init() when it is enabled.

2000-10-23  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * zserv.c (zebra_serv_un): UNIX domain socket server of zebra
        protocol.

2000-10-19  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * rib.c (rib_add_ipv4): Same check bug is fixed.

2000-10-03  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * rib.c (rib_if_down): Remove kernel route when the interface goes
        down.

        * debug.c: New command "debug zebra kernel" is added.

2000-10-02  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * zebra-0.89 is released.

2000-09-24  Harald Welte <laforge@gnumonks.org>

        * rt_netlink.c (netlink_interface_addr): Fix point-to-point address
        treatment in netlink interface.

2000-09-21  David Lipovkov <dlipovkov@OpticalAccess.com>

        * rib.c (rib_if_down): Pull static route only.  Protocol daemon
        must withdraw routes when interface goes down.
        (rib_add_ipv4): Check nexthop when replace route.

2000-09-21  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * if_ioctl.c (if_getaddrs): New function for looking up
        interface's address by getifaddrs().

2000-09-10  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * connected.c (connected_delete_ipv4): Add check for connected
        address is found or not.
        (connected_add_ipv6): Reflect IPv6 connected address change to
        protocol daemons.
        (connected_delete_ipv6): Likewise.

2000-09-07  David Lipovkov <davidl@nbase.co.il>

        * rib.c (rib_delete_ipv4): Reverted the change from pseudo
        interface patch to original.  Because ospfd deletes routes using
        zero ifindex.

2000-08-17  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * zebra-0.88 is released.

2000-08-15  "Akihiro Mizutani" <mizutani@dml.com>

        * rib.c (show_ip_route_protocol): Help string correction.
        (show_ip_route_prefix): Check prefix mask.
        (show_ip_route_vty_detail): Display distance and metric.

2000-08-14  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * zserv.c (zsend_interface_add): Change ifindex store size from
        two octet to four.
        (zsend_interface_delete): Likewise.
        (zsend_interface_address_add): Likewise.
        (zsend_interface_address_delete): Likewise.
        (zsend_interface_up): Likewise.
        (zsend_interface_down): Likewise.

2000-08-13  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * rib.c (rib_add_ipv4): Do not install distance 255 route.

2000-08-10  Toshiaki Takada  <takada@zebra.org>

        * interface.c (bandwidth_if), (no_bandwidth_if):  Call
        zebra_interface_up_update () instead of using if_up() and if_down().

2000-08-07  "Akihiro Mizutani" <mizutani@dml.com>

        * interface.c (bandwidth_if): Fix help string.

2000-08-07  Matthew Grant <grantma@anathoth.gen.nz>

        * interface.c (if_dump_vty): Display bandwidth value.
        (bandwidth_if): New command "bandwidth <1-10000000>" is added.
        When interface is up, force protocol daemons to recalculate routes
        due to cost change.
        (no_bandwidth_if): Likewise.
        (if_config_write): Output bandwidth configuration.

        * zserv.c (zsend_interface_add): Send bandwidth value.
        (zsend_interface_up): Likewise.
        (zsend_interface_down): Likewise.


2000-08-07  Michael Rozhavsky <mike@nbase.co.il>

        * rib.c (show_ip_route_protocol): "show ip route
        (bgp|connected|kernel|ospf|rip|static)" is added.

2000-08-07  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * rib.c (rib_lookup_ipv4_nexthop): Check parent node until IGP
        nexthop is found.
        (rib_add_ipv4_internal): Set fib ifindex to rib ifindex.

2000-08-06  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * redistribute.c (redistribute_delete): Fix bug of default route
        redistribute treatment.

2000-08-05  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * rib.c (rib_init): Install ip_node in rib.c instead of zserv.c.
        Change default distance value.

                    Old         New
        ------------------------------------------
        system      10           0
        kernel      20           0
        connected   30           0
        static      40           1
        rip         50         120
        ripng       50         120
        ospf        60         110
        ospf6       49         110
        bgp         70         200(iBGP)  20(eBGP)
        ------------------------------------------

        * zserv.c (client_lookup): Function removed.
        (zsend_interface_add): Use client's output buffer.  Check ifinfo
        flag.
        (zsend_interface_delete): Likewise.
        Delete ipv4_static_radix and ipv6_static_radix.

2000-08-02  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * zserv.h (struct zebra_client): When client request interface
        information, ifinfo is set.

        * rib.c: Temporary Revert changes for pseudo interface.

        * rib.h: Likewise.

        * zserv.c: Likewise.

        * interface.c: Likewise.
        
2000-08-02  David Lipovkov <davidl@nbase.co.il>

        * interface.c (zebra_if_init): Install interface "pseudo"
        commands.

        * rib.c (rib_create): ifname argument is added.
        (rib_add_ipv4_pseudo): New function is added.
        (rib_delete_ipv4_pseudo): Likewise.

        * rib.h : Delete INTERFACE_UNKNOWN definition.  Add prototype for
        pseudo interface functions.

        * rt_netlink.c (netlink_link_change): Check for pseudo interface.

        * zserv.c (ip_route): When destination is pseudo interface, call
        rib_add_ipv4_pseudo().

        * zserv.c (no_ip_route): Trim "unknown" argument.

2000-07-26  kunitake@dti.ad.jp

        * if_ioctl.c (if_get_hwaddr): Fix hardware address length from 8
        to 6.

        * rtadv.c (rtadv_send_packet): Fix shift bug for hardware address.

2000-07-24  Akihiro Mizutani <mizutani@dml.com>

        * interface.c: Use install_default() for common VTY commands.

2000-07-23  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * if_ioctl.c (interface_list_ioctl): A interface list size is
        calculated from ifreq->if_addr.sa_len.  This is for OpenBSD.

        * ioctl.c (if_get_mtu): Remove codes for SIOCGIFDATA.

2000-07-09  Chris Dunlop <chris@onthe.net.au>

        * if_ioctl.c (if_get_index): Add check for HAVE_BROKEN_ALIASES.

2000-07-04  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * zserv.c (zebra_client_read): Add ZEBRA_REDISTRIBUTE_{ADD,DELETE}
        message handling.

2000-07-02  David Lipovkov <davidl@nbase.co.il>

        * zserv.c: "ip route A.B.C.D/M unknown" command is added.

2000-06-28  Michael Rozhavsky <mike@nbase.co.il>

        * rib.c: Remove old kernel route when new route comes in.

2000-06-13  David Lipovkov <davidl@nbase.co.il>

        * rib.c (rib_if_up): Add check for unknown interface.

2000-06-13 Kunihiro Ishiguro  <kunihiro@zebra.org>

        * rib.h: Define INTERFACE_UNKNOWN.

2000-06-08  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * Makefile.am (EXTRA_DIST): Move irdp.c until implementation is
        finished.

2000-06-05  David Lipovkov <davidl@nbase.co.il>

        * interface.c (if_zebra_delete_hook): Call rib_if_delete().

        * redistribute.c (zebra_interface_delete_update): New function.

        * redistribute.h (zebra_interface_delete_update): New function
        prototype.

        * rib.c (rib_if_delete): New function.  Walk down all routes and
        delete all on the interface.

        * rib.h: New function prototype.

        * rt_netlink.c (netlink_link_change): Call
        zebra_interface_delete_update ().

2000-05-10  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * if_ioctl.c (interface_info_ioctl): Check interface's flag before
        checking interface's address.

2000-04-26  Jochen Friedrich <jochen@nwe.de>

        * GNOME-PRODUCT-ZEBRA-MIB: New file.

        * GNOME-SMI: New file.

2000-04-23  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * irdp.c: New file from 1997 development code.
        * irdp.h: Likewise.

2000-04-19  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * rtadv.c (rtadv_send_packet): Enclose router advertisement
        logging with IS_ZEBRA_DEBUG_PACKET.

2000-04-17  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * zserv.c (zebra_client_close): Remove client structure from
        client_list when connection is terminated.

2000-03-21  David Lipovkov <davidl@nbase.co.il>

        * connected.c (connected_add_ipv4): Allows all necessary structure
        updates for connected route, but doesn't insert it into rib if
        it's interface is down.

2000-01-21  Hideto Yamakawa <hideto.yamakawa@soliton.co.jp>

        * rtread_getmsg.c: Set some definition for Solaris 2.5 and Solaris
        2.5.1.

2000-01-21  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * rib.c (no_ipv6_route_ifname): Fix buf of cheking return value
        from str2prefix_ipv6().

2000-01-14  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * rt_socket.c: Revert to use RTF_HOST for IPv4 with /32 route and
        IPv6 with /128 routes.
        (kernel_rtm_ipv4): In case of /32 route's gateway is interface. It
        should have mask for cloning.

1999-12-26  Jochen.Friedrich@genorz.de

        * interface.c (if_dump_vty): Fix a bug of missing VTY_NEWLINE.

1999-12-23  Alex Zinin <zinin@amt.ru>
        * interface.*: dynamic int up/down support

1999-12-09  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * ipforward_proc.c (dropline): Move dropline() from lib/dropline.c

        * rtread_proc.c (proc_route_read): Don't use dropline().

1999-12-08  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * kernel_socket.c (rtm_read): When message is RTM_GET, it has own
        process's pid.

1999-12-04  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * main.c (main): Change to default log output to ZLOG_STDOUT.

        * zserv.c (zebra_serv): More detailed error print.

1999-11-30  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * kernel_socket.c (rtm_read): Check old pid for static route
        insertion check.

1999-11-30  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * interface.c (if_dump_vty): BSDI/OS uses 64bit for interface
        statistics counter.

        * mtu_kvm.c: New file added.

1999-11-27  Vladimir B. Grebenschikov <vova@express.ru>

        * kernel_socket.c (rtm_write): Set RTF_CLONING flag for
        route to the directly connected interface.

1999-11-27  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * rt_socket.c: Delete USE_HOST_BIT definition.

1999-11-21  Michael Handler <handler@sub-rosa.com>

        * rtread_getmsg.c: Undef some definition to resolve conflict.

1999-11-27  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * kernel_socket.c (rtm_write): Change to use pre stored struct_dl
        value for gateway specification.

1999-11-25  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * rt_socket.c (kernel_rtm_ipv4): Even mask is 32 under IPv4 or
        128 under IPv6, don't use RTF_HOST.

1999-11-21  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * Makefile.am (EXTRA_DIST): Add rtread_getmsg.c.

1999-11-21  Michael Handler <handler@sub-rosa.com>

        * rtread_getmsg.c: Added for Solaris 2.6 support.

1999-11-18  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * rtread_sysctl.c (rtm_read_route): RTM_DELETE handling added.

        * rt_socket.c (kernel_read): Better BSD routing socket support.

1999-10-19  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * client_main.c: Disable making obsolete zebra test `client'
        command.

1999-10-18  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * zebra.c: Renamed to zserv.c.

        * zebra.h: Global definitions are moved to lib/zebra.h.  Then
        renamed to zserv.h.

1999-10-15  Jordan Mendelson <jordy@wserv.com>

        * if_ioctl.c: Add Linux 2.2.X's alias support and dynamic
        interface.  Remove ugly MAX_INTERFACE handling codes.

1999-09-17  Satosi KOBAYASI <kobayasi@north.ad.jp>

        * Fix serious bug of IPv6 route deletion.

1999-09-11  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * ioctl.c (if_set_prefix): Properly set broadcast address.

1999-09-04  Yasuhiro Ohara  <yasu@sfc.wide.ad.jp>

        * rib.c (rib_add_ipv6, rib_delete_ipv6): now protocol daemons
        can install connected route to kernel via zebra

1999-08-24  VOP <vop@unity.net>

        * rib.c: Include "sockunion.h"

1999-08-22  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * ipforward.h: New file.

        * zebra.h: Obsolete message ZEBRA_GET_ALL_INTERFACE,
        ZEBRA_GET_ONE_INTERFACE, ZEBRA_GET_HOSTINFO are deleted.

1999-08-18  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * zebra.h (ZEBRA_INTERFACE_ADDRESS_ADD):
        ZEBRA_INTERFACE_{ADD,DELETE} added.

1999-08-15  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * rib.c: show ip route A.B.C.D works.

        * zebra.c (zebra_read_ipv4): Add ifindex to zebra messages.

1999-08-12  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * zebra.h: New Zebra message ZEBRA_INTERFACE_{ADD,DELETE} added.

1999-08-09  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * interface.h: New file.
        * Makefile.am: Add interface.h

1999-08-04  Yasuhiro Ohara  <yasu@sfc.wide.ad.jp>

        * redistribute.c (zebra_redistribute): give ifindex to client.

1999-08-02  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * main.c (longopts): -k, --keep_kernel option added.

1999-07-18  Yasuhiro Ohara  <yasu@sfc.wide.ad.jp>

        * rt_socket.c (rtm_write): forgot closing socket bug fixed.

1999-07-17  Yasuhiro Ohara  <yasu@sfc.wide.ad.jp>

        * rib.c (show_ipv6_cmd): if rib is link show interface name.

1999-07-17  Yasuhiro Ohara  <yasu@sfc.wide.ad.jp>

        * rt_socket.c (rtm_write): use sockaddr_dl when null gateway.

1999-07-16  Yasuhiro Ohara  <yasu@sfc.wide.ad.jp>

        * rt_socket.c (rtm_write): ipv6 route table bug fixed.

1999-07-15  Yasuhiro Ohara  <yasu@sfc.wide.ad.jp>

        * zebra.c (zebra_read_ipv6): read link prefix from ospf6 support

1999-07-15  Yasuhiro Ohara  <yasu@sfc.wide.ad.jp>

        * rt_socket.c (kernel_rtm_ipv6): gate treatment bug fixed.

1999-07-15  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * if_sysctl.c (ifm_read): Clear sockunion argument before fetching
        data.  Suggested by "Chris P. Ross" <cross@eng.us.uu.net>

1999-07-08  HEO SeonMeyong <seirios@Matrix.IRI.Co.Jp>

        * interface.c (if_tun_add): Add KAME's gif tunnel setting codes.

1999-06-26  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * zebra.c (zebra_serv): Only accept loopback address connection.

1999-06-25  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * zebra.h (ZEBRA_ROUTE_EXTERNAL): Add zebra messages flags

1999-06-17  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * ipforward_proc.c: ipforward_on () and ipforward_off () added.

1999-06-14  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * ipforward_proc.c (ipforward_ipv6): Check for IPv6 forwarding
        using /proc file system is added.

1999-06-06  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * if_ioctl.c (if_get_index): Interface index set bug is fixed by
        adding #else at the middle of function.  Suggested by David Luyer
        <luyer@ucs.uwa.edu.au>.

1999-05-29    <kunihiro@zebra.org>

        * rt_ioctl.c: Comment out #include <linux/ipv6_route.h>.

1999-05-26  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * zebra.h (ZEBRA_ROUTE_MAX): Add new define for the max value of
        the sort of routes.

1999-05-25  Patrick Koppen <koppen@rhrk.uni-kl.de>

        * rt_netlink.c (netlink_socket): Make netlink socket non-blocking.
        (netlink_parse_info): If errno is EWOULDBLOCK then continue to
        parse the message.
        (netlink_talk): Likewise
        
1999-05-17    <kunihiro@zebra.org>

        * redistribute.c (zebra_check_addr): Added for loopback address
        check.

1999-05-15  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * rt_netlink.c (netlink_route_change): Tempolary bypass ipv6 route
        change treatment.

        * Makefile.am (noinst_HEADERS): redistribute.h added.

        * redistribute.h: New file.

1999-05-14  Stephen R. van den Berg <srb@cuci.nl>

        * zebra.c (show_table): Show all table configuration DEFUN.
        (config_table): Config table number DEFUN.

        * rt_netlink.c: Add support for multiple routing table.

        * rib.c (rib_weed_table): New function added for delete all
        routes from specified routing table.

        * main.c (signal_init): SIGTERM call sigint.
        (sigint): Loggging more better message.

1999-05-09  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * rt_netlink.c: Change log () to zlog ().

1999-05-07    <kunihiro@zebra.org>

        * zebra.h (ZEBRA_ROUTE_OSPF6): Added for ospf6d route.

1999-04-20  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * interface.c: Add `no ip address' command.

1999-04-10  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * rt_netlink.c (kernel_read): Function added for asynchronous
        zebra between kernel communication.

1999-03-25  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * rtread_sysctl.c (rtm_read): Fix address memcopy overrun bug.
        Reported by Achim Patzner <ap@bnc.net>.

1999-03-03  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * Makefile.am: Install configuration sample with 600 permission.

1999-03-02  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * Makefile.am: Add -I.. to INCLUDES.

1999-02-18  Peter Galbavy  <Peter.Galbavy@knowledge.com>

        * syslog support added

1999-02-17 Peter Galbavy <Peter.Galbavy@knowledge.com>

        * if_sysctl.c (interface_list): allocated memory free when unknown
        ifm_type is returned.

        * ioctl.c (if_get_mtu): added SIOCGIFDATA treatment.
        
1998-12-15  Magnus Ahltorp <map@stacken.kth.se>

        * interface.c: Header include added.

1998-12-14  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * rt.h (kernel_delete_ipv6): change int index to unsigned int index.

1998-12-13  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * if_ioctl.c (interface_list_ioctl): interface flag must be
        checked before check addresses of the interface.

1998-12-07  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * Makefile.am (INCLUDES): add @INCLUDES@ for Linux IPv6.

1998-10-14  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * ioctl.c: Linux version before 2.1.0 need interface route setup.

1998-09-15  HEO SeonMeyong  <seirios@matrix.iri.co.jp>

        * change HYDRANGEA to KAME

1998-09-01  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * if_ioctl.c (if_addr_ioctl): set address family for getting
        interface's address.
        (if_get_index): silently return when can't get interface's index.

1998-08-17  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * main.c (main): batch mode option '-b' added.

1998-08-16  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * ioctl.c (if_set_prefix): add `ip address IPV4ADDR' command.
        * interface.c (shutdown_if): add interface shutdown and no
        shutdown command.

1998-08-12  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * rib.c (rib_add_ipv6): delete rib_add_in6.

1998-07-27  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * main.c: retain flag is added.

1998-07-08  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * rtable.[ch]: merged with rib.[ch]

1998-07-07  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * connected.h: renamed from ifa.h.

1998-06-09  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * rename if.c to interface.c
        * rename ifa.c to connected.c

        * Porting to Debian GNU/Linux 2.0 (hamm).

1998-06-08  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * rt_netlink.c: renamed from krt_netlink.c
        
        * fib.c: deleted.
        * rt_kvm.c: deleted.
        * rtread_getmsg.c: deleted.

1998-06-07  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * if.c (multicast): add multicast flag [un]set fucntion.

1998-05-19  Yamshita TAKAO  <jargon@lares.dti.ne.jp>

        * rt_socket.c: Modify for compile on Solaris, but dont't work it.
          rt_socket.c have some undefined function, so add directive "IMPLEMENT"

1998-05-18  Yamshita TAKAO  <jargon@lares.dti.ne.jp>

        * zebra.c: Modify for compile on Solaris.

1998-05-03  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * main.c: change CONFDIR to SYSCONFDIR.

1998-05-01  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * .cvsignore: added.

1998-04-02  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * client.c: moves to ../lib.

1998-03-30  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * if_ioctl.c (if_get_addr): Change address copy from memcopy() to
        structure assignment.

1998-03-30  URA Hiroshi <ura@yamato.ibm.co.jp>

        * if_sysctl.c (ifm_interface_add): sdl->sdl_data copy bug fixed.

1998-02-23  "Hannes R. Boehm" <hannes@boehm.org>

        * if.c (if_init): add config_exit_cmd and config_help_cmd.

1998-01-24  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * rt_ioctl.c (route_ioctl): EPERM treatment added.

1998-01-05  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * rt_socket.c (kernel_read): communication port zebra between
        kernel is now handled by kernel_read.

1998-01-02  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * main.c (main): zebra [-P port] can specify vty port number.

1997-12-25  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * zebra.c: change select will be block.

1997-12-04  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * add static route treatment.

1997-11-25  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * rt_netlink.c: add netlink support over GNU/Linux system.

1997-11-23  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * all inet_addr is changed to inet_aton.

        * zebra.c (ip_route): add ip route command for static routes.

1997-11-20  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * if.c (if_flag_dump): Linux port of if_flag_dump and _vty.

1997-11-19  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * if.c: add interface command.

1997-11-18  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * ipforward_proc.c : Now works on Linux.

1997-10-25  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * command.c : add completion feature.

1997-10-18  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * vty.c (vty_command): add vty interface.

1997-10-13  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * zebra.c: add verbose mode.

1997-10-12 SonMyong Ho <s-ho@Matrix.IRI.Co.Jp>

        * Hydrangea for FreeBSD supported
        * in.h: add some prototype.

1997-10-11  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * rt_socket.c and rtread.c completely rewritten.

1997-10-05  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * rt_socket.c: rename kernel_sock to routing_socket

1997-10-04  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * if.c (if_new): interface structure change from linklist to vector.

1997-10-03  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * vector.c (vector_init): create vector related function

1997-09-25  Kunihiro Ishiguro  <kunihiro@zebra.org>

        * Makefile.in: add tags target

        * start IPv6 support for INRIA FreeBSD.