zfs/Makefile.in

   1 # Makefile.in generated by automake 1.15 from Makefile.am.
   2 # @configure_input@
   3
   4 # Copyright (C) 1994-2014 Free Software Foundation, Inc.
   5
   6 # This Makefile.in is free software; the Free Software Foundation
   7 # gives unlimited permission to copy and/or distribute it,
   8 # with or without modifications, as long as this notice is preserved.
   9
  10 # This program is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  12 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  13 # PARTICULAR PURPOSE.
  14
  15 @SET_MAKE@
  16
  17 ###############################################################################
  18 # Copyright (C) 2007-2013 Lawrence Livermore National Security, LLC.
  19 # Copyright (C) 2007 The Regents of the University of California.
  20 # Written by Brian Behlendorf <behlendorf1@llnl.gov>.
  21 ###############################################################################
  22 # Build targets for RPM packages.
  23 ###############################################################################
  24
  25 VPATH = @srcdir@
  26 am__is_gnu_make = { \
  27   if test -z '$(MAKELEVEL)'; then \
  28     false; \
  29   elif test -n '$(MAKE_HOST)'; then \
  30     true; \
  31   elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
  32     true; \
  33   else \
  34     false; \
  35   fi; \
  36 }
  37 am__make_running_with_option = \
  38   case $${target_option-} in \
  39       ?) ;; \
  40       *) echo "am__make_running_with_option: internal error: invalid" \
  41               "target option '$${target_option-}' specified" >&2; \
  42          exit 1;; \
  43   esac; \
  44   has_opt=no; \
  45   sane_makeflags=$$MAKEFLAGS; \
  46   if $(am__is_gnu_make); then \
  47     sane_makeflags=$$MFLAGS; \
  48   else \
  49     case $$MAKEFLAGS in \
  50       *\\[\ \   ]*) \
  51         bs=\\; \
  52         sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
  53           | sed "s/$$bs$$bs[$$bs $$bs   ]*//g"`;; \
  54     esac; \
  55   fi; \
  56   skip_next=no; \
  57   strip_trailopt () \
  58   { \
  59     flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  60   }; \
  61   for flg in $$sane_makeflags; do \
  62     test $$skip_next = yes && { skip_next=no; continue; }; \
  63     case $$flg in \
  64       *=*|--*) continue;; \
  65         -*I) strip_trailopt 'I'; skip_next=yes;; \
  66       -*I?*) strip_trailopt 'I';; \
  67         -*O) strip_trailopt 'O'; skip_next=yes;; \
  68       -*O?*) strip_trailopt 'O';; \
  69         -*l) strip_trailopt 'l'; skip_next=yes;; \
  70       -*l?*) strip_trailopt 'l';; \
  71       -[dEDm]) skip_next=yes;; \
  72       -[JT]) skip_next=yes;; \
  73     esac; \
  74     case $$flg in \
  75       *$$target_option*) has_opt=yes; break;; \
  76     esac; \
  77   done; \
  78   test $$has_opt = yes
  79 am__make_dryrun = (target_option=n; $(am__make_running_with_option))
  80 am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
  81 pkgdatadir = $(datadir)/@PACKAGE@
  82 pkgincludedir = $(includedir)/@PACKAGE@
  83 pkglibdir = $(libdir)/@PACKAGE@
  84 pkglibexecdir = $(libexecdir)/@PACKAGE@
  85 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  86 install_sh_DATA = $(install_sh) -c -m 644
  87 install_sh_PROGRAM = $(install_sh) -c
  88 install_sh_SCRIPT = $(install_sh) -c
  89 INSTALL_HEADER = $(INSTALL_DATA)
  90 transform = $(program_transform_name)
  91 NORMAL_INSTALL = :
  92 PRE_INSTALL = :
  93 POST_INSTALL = :
  94 NORMAL_UNINSTALL = :
  95 PRE_UNINSTALL = :
  96 POST_UNINSTALL = :
  97 build_triplet = @build@
  98 host_triplet = @host@
  99 target_triplet = @target@
 100 @CONFIG_USER_TRUE@am__append_1 = udev etc man scripts lib cmd contrib
 101 @CONFIG_KERNEL_TRUE@am__append_2 = module
 102 subdir = .
 103 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 104 am__aclocal_m4_deps = $(top_srcdir)/config/always-no-bool-compare.m4 \
 105         $(top_srcdir)/config/always-no-unused-but-set-variable.m4 \
 106         $(top_srcdir)/config/dkms.m4 \
 107         $(top_srcdir)/config/kernel-acl.m4 \
 108         $(top_srcdir)/config/kernel-automount.m4 \
 109         $(top_srcdir)/config/kernel-bdev-block-device-operations.m4 \
 110         $(top_srcdir)/config/kernel-bdev-logical-size.m4 \
 111         $(top_srcdir)/config/kernel-bdev-physical-size.m4 \
 112         $(top_srcdir)/config/kernel-bdi-setup-and-register.m4 \
 113         $(top_srcdir)/config/kernel-bio-bvec-iter.m4 \
 114         $(top_srcdir)/config/kernel-bio-end-io-t-args.m4 \
 115         $(top_srcdir)/config/kernel-bio-failfast.m4 \
 116         $(top_srcdir)/config/kernel-bio-rw-barrier.m4 \
 117         $(top_srcdir)/config/kernel-bio-rw-discard.m4 \
 118         $(top_srcdir)/config/kernel-blk-queue-flush.m4 \
 119         $(top_srcdir)/config/kernel-blk-queue-max-hw-sectors.m4 \
 120         $(top_srcdir)/config/kernel-blk-queue-max-segments.m4 \
 121         $(top_srcdir)/config/kernel-blkdev-get-by-path.m4 \
 122         $(top_srcdir)/config/kernel-blkdev-get.m4 \
 123         $(top_srcdir)/config/kernel-block-device-operations-release-void.m4 \
 124         $(top_srcdir)/config/kernel-check-disk-size-change.m4 \
 125         $(top_srcdir)/config/kernel-clear-inode.m4 \
 126         $(top_srcdir)/config/kernel-commit-metadata.m4 \
 127         $(top_srcdir)/config/kernel-create-nameidata.m4 \
 128         $(top_srcdir)/config/kernel-current_bio_tail.m4 \
 129         $(top_srcdir)/config/kernel-d-make-root.m4 \
 130         $(top_srcdir)/config/kernel-d-obtain-alias.m4 \
 131         $(top_srcdir)/config/kernel-d-prune-aliases.m4 \
 132         $(top_srcdir)/config/kernel-declare-event-class.m4 \
 133         $(top_srcdir)/config/kernel-dentry-operations.m4 \
 134         $(top_srcdir)/config/kernel-dirty-inode.m4 \
 135         $(top_srcdir)/config/kernel-discard-granularity.m4 \
 136         $(top_srcdir)/config/kernel-elevator-change.m4 \
 137         $(top_srcdir)/config/kernel-encode-fh-inode.m4 \
 138         $(top_srcdir)/config/kernel-evict-inode.m4 \
 139         $(top_srcdir)/config/kernel-fallocate.m4 \
 140         $(top_srcdir)/config/kernel-file-inode.m4 \
 141         $(top_srcdir)/config/kernel-fmode-t.m4 \
 142         $(top_srcdir)/config/kernel-follow-down-one.m4 \
 143         $(top_srcdir)/config/kernel-fsync.m4 \
 144         $(top_srcdir)/config/kernel-generic_io_acct.m4 \
 145         $(top_srcdir)/config/kernel-get-disk-ro.m4 \
 146         $(top_srcdir)/config/kernel-get-gendisk.m4 \
 147         $(top_srcdir)/config/kernel-get-link.m4 \
 148         $(top_srcdir)/config/kernel-insert-inode-locked.m4 \
 149         $(top_srcdir)/config/kernel-invalidate-bdev-args.m4 \
 150         $(top_srcdir)/config/kernel-is_owner_or_cap.m4 \
 151         $(top_srcdir)/config/kernel-kmap-atomic-args.m4 \
 152         $(top_srcdir)/config/kernel-kobj-name-len.m4 \
 153         $(top_srcdir)/config/kernel-lookup-bdev.m4 \
 154         $(top_srcdir)/config/kernel-lookup-nameidata.m4 \
 155         $(top_srcdir)/config/kernel-lseek-execute.m4 \
 156         $(top_srcdir)/config/kernel-mk-request-fn.m4 \
 157         $(top_srcdir)/config/kernel-mkdir-umode-t.m4 \
 158         $(top_srcdir)/config/kernel-mount-nodev.m4 \
 159         $(top_srcdir)/config/kernel-open-bdev-exclusive.m4 \
 160         $(top_srcdir)/config/kernel-put-link.m4 \
 161         $(top_srcdir)/config/kernel-security-inode-init.m4 \
 162         $(top_srcdir)/config/kernel-set-nlink.m4 \
 163         $(top_srcdir)/config/kernel-sget-args.m4 \
 164         $(top_srcdir)/config/kernel-show-options.m4 \
 165         $(top_srcdir)/config/kernel-shrink.m4 \
 166         $(top_srcdir)/config/kernel-truncate-range.m4 \
 167         $(top_srcdir)/config/kernel-truncate-setsize.m4 \
 168         $(top_srcdir)/config/kernel-vfs-iterate.m4 \
 169         $(top_srcdir)/config/kernel-vfs-rw-iterate.m4 \
 170         $(top_srcdir)/config/kernel-xattr-handler.m4 \
 171         $(top_srcdir)/config/kernel.m4 $(top_srcdir)/config/libtool.m4 \
 172         $(top_srcdir)/config/ltoptions.m4 \
 173         $(top_srcdir)/config/ltsugar.m4 \
 174         $(top_srcdir)/config/ltversion.m4 \
 175         $(top_srcdir)/config/lt~obsolete.m4 \
 176         $(top_srcdir)/config/mount-helper.m4 \
 177         $(top_srcdir)/config/user-arch.m4 \
 178         $(top_srcdir)/config/user-dracut.m4 \
 179         $(top_srcdir)/config/user-frame-larger-than.m4 \
 180         $(top_srcdir)/config/user-libblkid.m4 \
 181         $(top_srcdir)/config/user-libuuid.m4 \
 182         $(top_srcdir)/config/user-runstatedir.m4 \
 183         $(top_srcdir)/config/user-systemd.m4 \
 184         $(top_srcdir)/config/user-sysvinit.m4 \
 185         $(top_srcdir)/config/user-udev.m4 \
 186         $(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
 187         $(top_srcdir)/config/zfs-build.m4 \
 188         $(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
 189 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 190         $(ACLOCAL_M4)
 191 DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
 192         $(am__configure_deps) $(am__extra_HEADERS_DIST) \
 193         $(am__DIST_COMMON)
 194 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 195  configure.lineno config.status.lineno
 196 mkinstalldirs = $(install_sh) -d
 197 CONFIG_HEADER = zfs_config.h
 198 CONFIG_CLEAN_FILES = module/Makefile module/avl/Makefile \
 199         module/nvpair/Makefile module/unicode/Makefile \
 200         module/zcommon/Makefile module/zfs/Makefile \
 201         module/zpios/Makefile zfs-script-config.sh zfs.release
 202 CONFIG_CLEAN_VPATH_FILES =
 203 AM_V_P = $(am__v_P_@AM_V@)
 204 am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
 205 am__v_P_0 = false
 206 am__v_P_1 = :
 207 AM_V_GEN = $(am__v_GEN_@AM_V@)
 208 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
 209 am__v_GEN_0 = @echo "  GEN     " $@;
 210 am__v_GEN_1 =
 211 AM_V_at = $(am__v_at_@AM_V@)
 212 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
 213 am__v_at_0 = @
 214 am__v_at_1 =
 215 SOURCES =
 216 DIST_SOURCES =
 217 RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
 218         ctags-recursive dvi-recursive html-recursive info-recursive \
 219         install-data-recursive install-dvi-recursive \
 220         install-exec-recursive install-html-recursive \
 221         install-info-recursive install-pdf-recursive \
 222         install-ps-recursive install-recursive installcheck-recursive \
 223         installdirs-recursive pdf-recursive ps-recursive \
 224         tags-recursive uninstall-recursive
 225 am__can_run_installinfo = \
 226   case $$AM_UPDATE_INFO_DIR in \
 227     n|no|NO) false;; \
 228     *) (install-info --version) >/dev/null 2>&1;; \
 229   esac
 230 am__extra_HEADERS_DIST = zfs.release.in zfs_config.h.in
 231 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 232 am__vpath_adj = case $$p in \
 233     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
 234     *) f=$$p;; \
 235   esac;
 236 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
 237 am__install_max = 40
 238 am__nobase_strip_setup = \
 239   srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
 240 am__nobase_strip = \
 241   for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
 242 am__nobase_list = $(am__nobase_strip_setup); \
 243   for p in $$list; do echo "$$p $$p"; done | \
 244   sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
 245   $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
 246     if (++n[$$2] == $(am__install_max)) \
 247       { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
 248     END { for (dir in files) print dir, files[dir] }'
 249 am__base_list = \
 250   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
 251   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 252 am__uninstall_files_from_dir = { \
 253   test -z "$$files" \
 254     || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
 255     || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
 256          $(am__cd) "$$dir" && rm -f $$files; }; \
 257   }
 258 am__installdirs = "$(DESTDIR)$(extradir)" "$(DESTDIR)$(kerneldir)"
 259 HEADERS = $(extra_HEADERS) $(nodist_kernel_HEADERS)
 260 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
 261   distclean-recursive maintainer-clean-recursive
 262 am__recursive_targets = \
 263   $(RECURSIVE_TARGETS) \
 264   $(RECURSIVE_CLEAN_TARGETS) \
 265   $(am__extra_recursive_targets)
 266 AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
 267         cscope distdir dist dist-all distcheck
 268 am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
 269         $(LISP)zfs_config.h.in
 270 # Read a list of newline-separated strings from the standard input,
 271 # and print each of them once, without duplicates.  Input order is
 272 # *not* preserved.
 273 am__uniquify_input = $(AWK) '\
 274   BEGIN { nonempty = 0; } \
 275   { items[$$0] = 1; nonempty = 1; } \
 276   END { if (nonempty) { for (i in items) print i; }; } \
 277 '
 278 # Make sure the list of sources is unique.  This is necessary because,
 279 # e.g., the same source file might be shared among _SOURCES variables
 280 # for different programs/libraries.
 281 am__define_uniq_tagged_files = \
 282   list='$(am__tagged_files)'; \
 283   unique=`for i in $$list; do \
 284     if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 285   done | $(am__uniquify_input)`
 286 ETAGS = etags
 287 CTAGS = ctags
 288 CSCOPE = cscope
 289 DIST_SUBDIRS = include rpm udev etc man scripts lib cmd contrib module
 290 am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config/deb.am \
 291         $(srcdir)/config/rpm.am $(srcdir)/config/tgz.am \
 292         $(srcdir)/zfs-script-config.sh.in $(srcdir)/zfs.release.in \
 293         $(srcdir)/zfs_config.h.in $(top_srcdir)/config/compile \
 294         $(top_srcdir)/config/config.guess \
 295         $(top_srcdir)/config/config.sub \
 296         $(top_srcdir)/config/install-sh $(top_srcdir)/config/ltmain.sh \
 297         $(top_srcdir)/config/missing $(top_srcdir)/module/Makefile.in \
 298         $(top_srcdir)/module/avl/Makefile.in \
 299         $(top_srcdir)/module/nvpair/Makefile.in \
 300         $(top_srcdir)/module/unicode/Makefile.in \
 301         $(top_srcdir)/module/zcommon/Makefile.in \
 302         $(top_srcdir)/module/zfs/Makefile.in \
 303         $(top_srcdir)/module/zpios/Makefile.in AUTHORS config/compile \
 304         config/config.guess config/config.sub config/install-sh \
 305         config/ltmain.sh config/missing
 306 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 307 distdir = $(PACKAGE)-$(VERSION)
 308 top_distdir = $(distdir)
 309 am__remove_distdir = \
 310   if test -d "$(distdir)"; then \
 311     find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
 312       && rm -rf "$(distdir)" \
 313       || { sleep 5 && rm -rf "$(distdir)"; }; \
 314   else :; fi
 315 am__post_remove_distdir = $(am__remove_distdir)
 316 am__relativize = \
 317   dir0=`pwd`; \
 318   sed_first='s,^\([^/]*\)/.*$$,\1,'; \
 319   sed_rest='s,^[^/]*/*,,'; \
 320   sed_last='s,^.*/\([^/]*\)$$,\1,'; \
 321   sed_butlast='s,/*[^/]*$$,,'; \
 322   while test -n "$$dir1"; do \
 323     first=`echo "$$dir1" | sed -e "$$sed_first"`; \
 324     if test "$$first" != "."; then \
 325       if test "$$first" = ".."; then \
 326         dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
 327         dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
 328       else \
 329         first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
 330         if test "$$first2" = "$$first"; then \
 331           dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
 332         else \
 333           dir2="../$$dir2"; \
 334         fi; \
 335         dir0="$$dir0"/"$$first"; \
 336       fi; \
 337     fi; \
 338     dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
 339   done; \
 340   reldir="$$dir2"
 341 DIST_ARCHIVES = $(distdir).tar.gz
 342 GZIP_ENV = --best
 343 DIST_TARGETS = dist-gzip
 344 distuninstallcheck_listfiles = find . -type f -print
 345 am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
 346   | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
 347 distcleancheck_listfiles = find . -type f -print
 348 ACLOCAL = @ACLOCAL@
 349 ALIEN = @ALIEN@
 350 ALIEN_VERSION = @ALIEN_VERSION@
 351 AMTAR = @AMTAR@
 352 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 353 AR = @AR@
 354 AUTOCONF = @AUTOCONF@
 355 AUTOHEADER = @AUTOHEADER@
 356 AUTOMAKE = @AUTOMAKE@
 357 AWK = @AWK@
 358 CC = @CC@
 359 CCAS = @CCAS@
 360 CCASDEPMODE = @CCASDEPMODE@
 361 CCASFLAGS = @CCASFLAGS@
 362 CCDEPMODE = @CCDEPMODE@
 363 CFLAGS = @CFLAGS@
 364 CPP = @CPP@
 365 CPPFLAGS = @CPPFLAGS@
 366 CYGPATH_W = @CYGPATH_W@
 367 DEBUG_CFLAGS = @DEBUG_CFLAGS@
 368 DEBUG_DMU_TX = @DEBUG_DMU_TX@
 369 DEBUG_STACKFLAGS = @DEBUG_STACKFLAGS@
 370 DEBUG_ZFS = @DEBUG_ZFS@
 371 DEFAULT_INITCONF_DIR = @DEFAULT_INITCONF_DIR@
 372 DEFAULT_INIT_DIR = @DEFAULT_INIT_DIR@
 373 DEFAULT_INIT_SCRIPT = @DEFAULT_INIT_SCRIPT@
 374 DEFAULT_PACKAGE = @DEFAULT_PACKAGE@
 375 DEFINE_INITRAMFS = @DEFINE_INITRAMFS@
 376 DEFS = @DEFS@
 377 DEPDIR = @DEPDIR@
 378 DLLTOOL = @DLLTOOL@
 379 DPKG = @DPKG@
 380 DPKGBUILD = @DPKGBUILD@
 381 DPKGBUILD_VERSION = @DPKGBUILD_VERSION@
 382 DPKG_VERSION = @DPKG_VERSION@
 383 DSYMUTIL = @DSYMUTIL@
 384 DUMPBIN = @DUMPBIN@
 385 ECHO_C = @ECHO_C@
 386 ECHO_N = @ECHO_N@
 387 ECHO_T = @ECHO_T@
 388 EGREP = @EGREP@
 389 EXEEXT = @EXEEXT@
 390 FGREP = @FGREP@
 391 FRAME_LARGER_THAN = @FRAME_LARGER_THAN@
 392 GREP = @GREP@
 393 HAVE_ALIEN = @HAVE_ALIEN@
 394 HAVE_DPKG = @HAVE_DPKG@
 395 HAVE_DPKGBUILD = @HAVE_DPKGBUILD@
 396 HAVE_RPM = @HAVE_RPM@
 397 HAVE_RPMBUILD = @HAVE_RPMBUILD@
 398 INSTALL = @INSTALL@
 399 INSTALL_DATA = @INSTALL_DATA@
 400 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 401 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 402 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 403 KERNELCPPFLAGS = @KERNELCPPFLAGS@
 404 KERNELMAKE_PARAMS = @KERNELMAKE_PARAMS@
 405 LD = @LD@
 406 LDFLAGS = @LDFLAGS@
 407 LIBBLKID = @LIBBLKID@
 408 LIBOBJS = @LIBOBJS@
 409 LIBS = @LIBS@
 410 LIBTOOL = @LIBTOOL@
 411 LIBUUID = @LIBUUID@
 412 LINUX = @LINUX@
 413 LINUX_OBJ = @LINUX_OBJ@
 414 LINUX_SYMBOLS = @LINUX_SYMBOLS@
 415 LINUX_VERSION = @LINUX_VERSION@
 416 LIPO = @LIPO@
 417 LN_S = @LN_S@
 418 LTLIBOBJS = @LTLIBOBJS@
 419 LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
 420 MAINT = @MAINT@
 421 MAKEINFO = @MAKEINFO@
 422 MANIFEST_TOOL = @MANIFEST_TOOL@
 423 MKDIR_P = @MKDIR_P@
 424 NM = @NM@
 425 NMEDIT = @NMEDIT@
 426 NO_BOOL_COMPARE = @NO_BOOL_COMPARE@
 427 NO_UNUSED_BUT_SET_VARIABLE = @NO_UNUSED_BUT_SET_VARIABLE@
 428 OBJDUMP = @OBJDUMP@
 429 OBJEXT = @OBJEXT@
 430 OTOOL = @OTOOL@
 431 OTOOL64 = @OTOOL64@
 432 PACKAGE = @PACKAGE@
 433 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 434 PACKAGE_NAME = @PACKAGE_NAME@
 435 PACKAGE_STRING = @PACKAGE_STRING@
 436 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 437 PACKAGE_URL = @PACKAGE_URL@
 438 PACKAGE_VERSION = @PACKAGE_VERSION@
 439 PATH_SEPARATOR = @PATH_SEPARATOR@
 440 RANLIB = @RANLIB@
 441 RELEASE = @RELEASE@
 442 RPM = @RPM@
 443 RPMBUILD = @RPMBUILD@
 444 RPMBUILD_VERSION = @RPMBUILD_VERSION@
 445 RPM_DEFINE_COMMON = @RPM_DEFINE_COMMON@
 446 RPM_DEFINE_DKMS = @RPM_DEFINE_DKMS@
 447 RPM_DEFINE_KMOD = @RPM_DEFINE_KMOD@
 448 RPM_DEFINE_UTIL = @RPM_DEFINE_UTIL@
 449 RPM_SPEC_DIR = @RPM_SPEC_DIR@
 450 RPM_VERSION = @RPM_VERSION@
 451 SED = @SED@
 452 SET_MAKE = @SET_MAKE@
 453 SHELL = @SHELL@
 454 SPL = @SPL@
 455 SPL_OBJ = @SPL_OBJ@
 456 SPL_SYMBOLS = @SPL_SYMBOLS@
 457 SPL_VERSION = @SPL_VERSION@
 458 SRPM_DEFINE_COMMON = @SRPM_DEFINE_COMMON@
 459 SRPM_DEFINE_DKMS = @SRPM_DEFINE_DKMS@
 460 SRPM_DEFINE_KMOD = @SRPM_DEFINE_KMOD@
 461 SRPM_DEFINE_UTIL = @SRPM_DEFINE_UTIL@
 462 STRIP = @STRIP@
 463 TARGET_ASM_DIR = @TARGET_ASM_DIR@
 464 VENDOR = @VENDOR@
 465 VERSION = @VERSION@
 466 ZFS_CONFIG = @ZFS_CONFIG@
 467 ZFS_INIT_SYSTEMD = @ZFS_INIT_SYSTEMD@
 468 ZFS_INIT_SYSV = @ZFS_INIT_SYSV@
 469 ZFS_META_ALIAS = @ZFS_META_ALIAS@
 470 ZFS_META_AUTHOR = @ZFS_META_AUTHOR@
 471 ZFS_META_DATA = @ZFS_META_DATA@
 472 ZFS_META_LICENSE = @ZFS_META_LICENSE@
 473 ZFS_META_LT_AGE = @ZFS_META_LT_AGE@
 474 ZFS_META_LT_CURRENT = @ZFS_META_LT_CURRENT@
 475 ZFS_META_LT_REVISION = @ZFS_META_LT_REVISION@
 476 ZFS_META_NAME = @ZFS_META_NAME@
 477 ZFS_META_RELEASE = @ZFS_META_RELEASE@
 478 ZFS_META_VERSION = @ZFS_META_VERSION@
 479 ZFS_MODULE_LOAD = @ZFS_MODULE_LOAD@
 480 ZLIB = @ZLIB@
 481 abs_builddir = @abs_builddir@
 482 abs_srcdir = @abs_srcdir@
 483 abs_top_builddir = @abs_top_builddir@
 484 abs_top_srcdir = @abs_top_srcdir@
 485 ac_ct_AR = @ac_ct_AR@
 486 ac_ct_CC = @ac_ct_CC@
 487 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 488 am__include = @am__include@
 489 am__leading_dot = @am__leading_dot@
 490 am__quote = @am__quote@
 491 am__tar = @am__tar@
 492 am__untar = @am__untar@
 493 bindir = @bindir@
 494 build = @build@
 495 build_alias = @build_alias@
 496 build_cpu = @build_cpu@
 497 build_os = @build_os@
 498 build_vendor = @build_vendor@
 499 builddir = @builddir@
 500 datadir = @datadir@
 501 datarootdir = @datarootdir@
 502 docdir = @docdir@
 503 dracutdir = @dracutdir@
 504 dvidir = @dvidir@
 505 exec_prefix = @exec_prefix@
 506 host = @host@
 507 host_alias = @host_alias@
 508 host_cpu = @host_cpu@
 509 host_os = @host_os@
 510 host_vendor = @host_vendor@
 511 htmldir = @htmldir@
 512 includedir = @includedir@
 513 infodir = @infodir@
 514 install_sh = @install_sh@
 515 libdir = @libdir@
 516 libexecdir = @libexecdir@
 517 localedir = @localedir@
 518 localstatedir = @localstatedir@
 519 mandir = @mandir@
 520 mkdir_p = @mkdir_p@
 521 modulesloaddir = @modulesloaddir@
 522 mounthelperdir = @mounthelperdir@
 523 oldincludedir = @oldincludedir@
 524 pdfdir = @pdfdir@
 525 prefix = @prefix@
 526 program_transform_name = @program_transform_name@
 527 psdir = @psdir@
 528 runstatedir = @runstatedir@
 529 sbindir = @sbindir@
 530 sharedstatedir = @sharedstatedir@
 531 srcdir = @srcdir@
 532 sysconfdir = @sysconfdir@
 533 systemdpresetdir = @systemdpresetdir@
 534 systemdunitdir = @systemdunitdir@
 535 target = @target@
 536 target_alias = @target_alias@
 537 target_cpu = @target_cpu@
 538 target_os = @target_os@
 539 target_vendor = @target_vendor@
 540 top_build_prefix = @top_build_prefix@
 541 top_builddir = @top_builddir@
 542 top_srcdir = @top_srcdir@
 543 udevdir = @udevdir@
 544 udevruledir = @udevruledir@
 545 ACLOCAL_AMFLAGS = -I config
 546 SUBDIRS = include rpm $(am__append_1) $(am__append_2)
 547 @CONFIG_KERNEL_TRUE@extradir = @prefix@/src/zfs-$(VERSION)
 548 @CONFIG_KERNEL_TRUE@extra_HEADERS = zfs.release.in zfs_config.h.in
 549 @CONFIG_KERNEL_TRUE@kerneldir = @prefix@/src/zfs-$(VERSION)/$(LINUX_VERSION)
 550 @CONFIG_KERNEL_TRUE@nodist_kernel_HEADERS = zfs.release zfs_config.h module/$(LINUX_SYMBOLS)
 551 AUTOMAKE_OPTIONS = foreign
 552 EXTRA_DIST = autogen.sh copy-builtin config/config.awk config/rpm.am \
 553         config/deb.am config/tgz.am META DISCLAIMER COPYRIGHT \
 554         README.markdown OPENSOLARIS.LICENSE
 555 all: zfs_config.h
 556         $(MAKE) $(AM_MAKEFLAGS) all-recursive
 557
 558 .SUFFIXES:
 559 am--refresh: Makefile
 560         @:
 561 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/config/rpm.am $(srcdir)/config/deb.am $(srcdir)/config/tgz.am $(am__configure_deps)
 562         @for dep in $?; do \
 563           case '$(am__configure_deps)' in \
 564             *$$dep*) \
 565               echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
 566               $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
 567                 && exit 0; \
 568               exit 1;; \
 569           esac; \
 570         done; \
 571         echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
 572         $(am__cd) $(top_srcdir) && \
 573           $(AUTOMAKE) --foreign Makefile
 574 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 575         @case '$?' in \
 576           *config.status*) \
 577             echo ' $(SHELL) ./config.status'; \
 578             $(SHELL) ./config.status;; \
 579           *) \
 580             echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
 581             cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
 582         esac;
 583 $(srcdir)/config/rpm.am $(srcdir)/config/deb.am $(srcdir)/config/tgz.am $(am__empty):
 584
 585 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 586         $(SHELL) ./config.status --recheck
 587
 588 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 589         $(am__cd) $(srcdir) && $(AUTOCONF)
 590 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 591         $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
 592 $(am__aclocal_m4_deps):
 593
 594 zfs_config.h: stamp-h1
 595         @test -f $@ || rm -f stamp-h1
 596         @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
 597
 598 stamp-h1: $(srcdir)/zfs_config.h.in $(top_builddir)/config.status
 599         @rm -f stamp-h1
 600         cd $(top_builddir) && $(SHELL) ./config.status zfs_config.h
 601 $(srcdir)/zfs_config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 602         ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
 603         rm -f stamp-h1
 604         touch $@
 605
 606 distclean-hdr:
 607         -rm -f zfs_config.h stamp-h1
 608 module/Makefile: $(top_builddir)/config.status $(top_srcdir)/module/Makefile.in
 609         cd $(top_builddir) && $(SHELL) ./config.status $@
 610 module/avl/Makefile: $(top_builddir)/config.status $(top_srcdir)/module/avl/Makefile.in
 611         cd $(top_builddir) && $(SHELL) ./config.status $@
 612 module/nvpair/Makefile: $(top_builddir)/config.status $(top_srcdir)/module/nvpair/Makefile.in
 613         cd $(top_builddir) && $(SHELL) ./config.status $@
 614 module/unicode/Makefile: $(top_builddir)/config.status $(top_srcdir)/module/unicode/Makefile.in
 615         cd $(top_builddir) && $(SHELL) ./config.status $@
 616 module/zcommon/Makefile: $(top_builddir)/config.status $(top_srcdir)/module/zcommon/Makefile.in
 617         cd $(top_builddir) && $(SHELL) ./config.status $@
 618 module/zfs/Makefile: $(top_builddir)/config.status $(top_srcdir)/module/zfs/Makefile.in
 619         cd $(top_builddir) && $(SHELL) ./config.status $@
 620 module/zpios/Makefile: $(top_builddir)/config.status $(top_srcdir)/module/zpios/Makefile.in
 621         cd $(top_builddir) && $(SHELL) ./config.status $@
 622 zfs-script-config.sh: $(top_builddir)/config.status $(srcdir)/zfs-script-config.sh.in
 623         cd $(top_builddir) && $(SHELL) ./config.status $@
 624 zfs.release: $(top_builddir)/config.status $(srcdir)/zfs.release.in
 625         cd $(top_builddir) && $(SHELL) ./config.status $@
 626
 627 mostlyclean-libtool:
 628         -rm -f *.lo
 629
 630 clean-libtool:
 631         -rm -rf .libs _libs
 632
 633 distclean-libtool:
 634         -rm -f libtool config.lt
 635 install-extraHEADERS: $(extra_HEADERS)
 636         @$(NORMAL_INSTALL)
 637         @list='$(extra_HEADERS)'; test -n "$(extradir)" || list=; \
 638         if test -n "$$list"; then \
 639           echo " $(MKDIR_P) '$(DESTDIR)$(extradir)'"; \
 640           $(MKDIR_P) "$(DESTDIR)$(extradir)" || exit 1; \
 641         fi; \
 642         for p in $$list; do \
 643           if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 644           echo "$$d$$p"; \
 645         done | $(am__base_list) | \
 646         while read files; do \
 647           echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(extradir)'"; \
 648           $(INSTALL_HEADER) $$files "$(DESTDIR)$(extradir)" || exit $$?; \
 649         done
 650
 651 uninstall-extraHEADERS:
 652         @$(NORMAL_UNINSTALL)
 653         @list='$(extra_HEADERS)'; test -n "$(extradir)" || list=; \
 654         files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
 655         dir='$(DESTDIR)$(extradir)'; $(am__uninstall_files_from_dir)
 656 install-nodist_kernelHEADERS: $(nodist_kernel_HEADERS)
 657         @$(NORMAL_INSTALL)
 658         @list='$(nodist_kernel_HEADERS)'; test -n "$(kerneldir)" || list=; \
 659         if test -n "$$list"; then \
 660           echo " $(MKDIR_P) '$(DESTDIR)$(kerneldir)'"; \
 661           $(MKDIR_P) "$(DESTDIR)$(kerneldir)" || exit 1; \
 662         fi; \
 663         for p in $$list; do \
 664           if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 665           echo "$$d$$p"; \
 666         done | $(am__base_list) | \
 667         while read files; do \
 668           echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(kerneldir)'"; \
 669           $(INSTALL_HEADER) $$files "$(DESTDIR)$(kerneldir)" || exit $$?; \
 670         done
 671
 672 uninstall-nodist_kernelHEADERS:
 673         @$(NORMAL_UNINSTALL)
 674         @list='$(nodist_kernel_HEADERS)'; test -n "$(kerneldir)" || list=; \
 675         files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
 676         dir='$(DESTDIR)$(kerneldir)'; $(am__uninstall_files_from_dir)
 677
 678 # This directory's subdirectories are mostly independent; you can cd
 679 # into them and run 'make' without going through this Makefile.
 680 # To change the values of 'make' variables: instead of editing Makefiles,
 681 # (1) if the variable is set in 'config.status', edit 'config.status'
 682 #     (which will cause the Makefiles to be regenerated when you run 'make');
 683 # (2) otherwise, pass the desired values on the 'make' command line.
 684 $(am__recursive_targets):
 685         @fail=; \
 686         if $(am__make_keepgoing); then \
 687           failcom='fail=yes'; \
 688         else \
 689           failcom='exit 1'; \
 690         fi; \
 691         dot_seen=no; \
 692         target=`echo $@ | sed s/-recursive//`; \
 693         case "$@" in \
 694           distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
 695           *) list='$(SUBDIRS)' ;; \
 696         esac; \
 697         for subdir in $$list; do \
 698           echo "Making $$target in $$subdir"; \
 699           if test "$$subdir" = "."; then \
 700             dot_seen=yes; \
 701             local_target="$$target-am"; \
 702           else \
 703             local_target="$$target"; \
 704           fi; \
 705           ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 706           || eval $$failcom; \
 707         done; \
 708         if test "$$dot_seen" = "no"; then \
 709           $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 710         fi; test -z "$$fail"
 711
 712 ID: $(am__tagged_files)
 713         $(am__define_uniq_tagged_files); mkid -fID $$unique
 714 TAGS: tags
 715
 716 tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
 717         set x; \
 718         here=`pwd`; \
 719         if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 720           include_option=--etags-include; \
 721           empty_fix=.; \
 722         else \
 723           include_option=--include; \
 724           empty_fix=; \
 725         fi; \
 726         list='$(SUBDIRS)'; for subdir in $$list; do \
 727           if test "$$subdir" = .; then :; else \
 728             test ! -f $$subdir/TAGS || \
 729               set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 730           fi; \
 731         done; \
 732         $(am__define_uniq_tagged_files); \
 733         shift; \
 734         if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 735           test -n "$$unique" || unique=$$empty_fix; \
 736           if test $$# -gt 0; then \
 737             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 738               "$$@" $$unique; \
 739           else \
 740             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 741               $$unique; \
 742           fi; \
 743         fi
 744
 745 CTAGS: ctags
 746 ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
 747         $(am__define_uniq_tagged_files); \
 748         test -z "$(CTAGS_ARGS)$$unique" \
 749           || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 750              $$unique
 751
 752 GTAGS:
 753         here=`$(am__cd) $(top_builddir) && pwd` \
 754           && $(am__cd) $(top_srcdir) \
 755           && gtags -i $(GTAGS_ARGS) "$$here"
 756 cscope: cscope.files
 757         test ! -s cscope.files \
 758           || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
 759 clean-cscope:
 760         -rm -f cscope.files
 761 cscope.files: clean-cscope cscopelist
 762 cscopelist: cscopelist-recursive
 763
 764 cscopelist-am: $(am__tagged_files)
 765         list='$(am__tagged_files)'; \
 766         case "$(srcdir)" in \
 767           [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
 768           *) sdir=$(subdir)/$(srcdir) ;; \
 769         esac; \
 770         for i in $$list; do \
 771           if test -f "$$i"; then \
 772             echo "$(subdir)/$$i"; \
 773           else \
 774             echo "$$sdir/$$i"; \
 775           fi; \
 776         done >> $(top_builddir)/cscope.files
 777
 778 distclean-tags:
 779         -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 780         -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
 781
 782 distdir: $(DISTFILES)
 783         $(am__remove_distdir)
 784         test -d "$(distdir)" || mkdir "$(distdir)"
 785         @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 786         topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 787         list='$(DISTFILES)'; \
 788           dist_files=`for file in $$list; do echo $$file; done | \
 789           sed -e "s|^$$srcdirstrip/||;t" \
 790               -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
 791         case $$dist_files in \
 792           */*) $(MKDIR_P) `echo "$$dist_files" | \
 793                            sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
 794                            sort -u` ;; \
 795         esac; \
 796         for file in $$dist_files; do \
 797           if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 798           if test -d $$d/$$file; then \
 799             dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
 800             if test -d "$(distdir)/$$file"; then \
 801               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 802             fi; \
 803             if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 804               cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
 805               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 806             fi; \
 807             cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 808           else \
 809             test -f "$(distdir)/$$file" \
 810             || cp -p $$d/$$file "$(distdir)/$$file" \
 811             || exit 1; \
 812           fi; \
 813         done
 814         @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 815           if test "$$subdir" = .; then :; else \
 816             $(am__make_dryrun) \
 817               || test -d "$(distdir)/$$subdir" \
 818               || $(MKDIR_P) "$(distdir)/$$subdir" \
 819               || exit 1; \
 820             dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
 821             $(am__relativize); \
 822             new_distdir=$$reldir; \
 823             dir1=$$subdir; dir2="$(top_distdir)"; \
 824             $(am__relativize); \
 825             new_top_distdir=$$reldir; \
 826             echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
 827             echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
 828             ($(am__cd) $$subdir && \
 829               $(MAKE) $(AM_MAKEFLAGS) \
 830                 top_distdir="$$new_top_distdir" \
 831                 distdir="$$new_distdir" \
 832                 am__remove_distdir=: \
 833                 am__skip_length_check=: \
 834                 am__skip_mode_fix=: \
 835                 distdir) \
 836               || exit 1; \
 837           fi; \
 838         done
 839         $(MAKE) $(AM_MAKEFLAGS) \
 840           top_distdir="$(top_distdir)" distdir="$(distdir)" \
 841           dist-hook
 842         -test -n "$(am__skip_mode_fix)" \
 843         || find "$(distdir)" -type d ! -perm -755 \
 844                 -exec chmod u+rwx,go+rx {} \; -o \
 845           ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
 846           ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
 847           ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
 848         || chmod -R a+r "$(distdir)"
 849 dist-gzip: distdir
 850         tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
 851         $(am__post_remove_distdir)
 852
 853 dist-bzip2: distdir
 854         tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
 855         $(am__post_remove_distdir)
 856
 857 dist-lzip: distdir
 858         tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
 859         $(am__post_remove_distdir)
 860
 861 dist-xz: distdir
 862         tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
 863         $(am__post_remove_distdir)
 864
 865 dist-tarZ: distdir
 866         @echo WARNING: "Support for distribution archives compressed with" \
 867                        "legacy program 'compress' is deprecated." >&2
 868         @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
 869         tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
 870         $(am__post_remove_distdir)
 871
 872 dist-shar: distdir
 873         @echo WARNING: "Support for shar distribution archives is" \
 874                        "deprecated." >&2
 875         @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
 876         shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
 877         $(am__post_remove_distdir)
 878
 879 dist-zip: distdir
 880         -rm -f $(distdir).zip
 881         zip -rq $(distdir).zip $(distdir)
 882         $(am__post_remove_distdir)
 883
 884 dist dist-all:
 885         $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
 886         $(am__post_remove_distdir)
 887
 888 # This target untars the dist file and tries a VPATH configuration.  Then
 889 # it guarantees that the distribution is self-contained by making another
 890 # tarfile.
 891 distcheck: dist
 892         case '$(DIST_ARCHIVES)' in \
 893         *.tar.gz*) \
 894           GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
 895         *.tar.bz2*) \
 896           bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
 897         *.tar.lz*) \
 898           lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
 899         *.tar.xz*) \
 900           xz -dc $(distdir).tar.xz | $(am__untar) ;;\
 901         *.tar.Z*) \
 902           uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
 903         *.shar.gz*) \
 904           GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
 905         *.zip*) \
 906           unzip $(distdir).zip ;;\
 907         esac
 908         chmod -R a-w $(distdir)
 909         chmod u+w $(distdir)
 910         mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
 911         chmod a-w $(distdir)
 912         test -d $(distdir)/_build || exit 0; \
 913         dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
 914           && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
 915           && am__cwd=`pwd` \
 916           && $(am__cd) $(distdir)/_build/sub \
 917           && ../../configure \
 918             $(AM_DISTCHECK_CONFIGURE_FLAGS) \
 919             $(DISTCHECK_CONFIGURE_FLAGS) \
 920             --srcdir=../.. --prefix="$$dc_install_base" \
 921           && $(MAKE) $(AM_MAKEFLAGS) \
 922           && $(MAKE) $(AM_MAKEFLAGS) dvi \
 923           && $(MAKE) $(AM_MAKEFLAGS) check \
 924           && $(MAKE) $(AM_MAKEFLAGS) install \
 925           && $(MAKE) $(AM_MAKEFLAGS) installcheck \
 926           && $(MAKE) $(AM_MAKEFLAGS) uninstall \
 927           && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
 928                 distuninstallcheck \
 929           && chmod -R a-w "$$dc_install_base" \
 930           && ({ \
 931                (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
 932                && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
 933                && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
 934                && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
 935                     distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
 936               } || { rm -rf "$$dc_destdir"; exit 1; }) \
 937           && rm -rf "$$dc_destdir" \
 938           && $(MAKE) $(AM_MAKEFLAGS) dist \
 939           && rm -rf $(DIST_ARCHIVES) \
 940           && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
 941           && cd "$$am__cwd" \
 942           || exit 1
 943         $(am__post_remove_distdir)
 944         @(echo "$(distdir) archives ready for distribution: "; \
 945           list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
 946           sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
 947 distuninstallcheck:
 948         @test -n '$(distuninstallcheck_dir)' || { \
 949           echo 'ERROR: trying to run $@ with an empty' \
 950                '$$(distuninstallcheck_dir)' >&2; \
 951           exit 1; \
 952         }; \
 953         $(am__cd) '$(distuninstallcheck_dir)' || { \
 954           echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
 955           exit 1; \
 956         }; \
 957         test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
 958            || { echo "ERROR: files left after uninstall:" ; \
 959                 if test -n "$(DESTDIR)"; then \
 960                   echo "  (check DESTDIR support)"; \
 961                 fi ; \
 962                 $(distuninstallcheck_listfiles) ; \
 963                 exit 1; } >&2
 964 distcleancheck: distclean
 965         @if test '$(srcdir)' = . ; then \
 966           echo "ERROR: distcleancheck can only run from a VPATH build" ; \
 967           exit 1 ; \
 968         fi
 969         @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
 970           || { echo "ERROR: files left in build directory after distclean:" ; \
 971                $(distcleancheck_listfiles) ; \
 972                exit 1; } >&2
 973 check-am: all-am
 974 check: check-recursive
 975 all-am: Makefile $(HEADERS) zfs_config.h
 976 installdirs: installdirs-recursive
 977 installdirs-am:
 978         for dir in "$(DESTDIR)$(extradir)" "$(DESTDIR)$(kerneldir)"; do \
 979           test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 980         done
 981 install: install-recursive
 982 install-exec: install-exec-recursive
 983 install-data: install-data-recursive
 984 uninstall: uninstall-recursive
 985
 986 install-am: all-am
 987         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 988
 989 installcheck: installcheck-recursive
 990 install-strip:
 991         if test -z '$(STRIP)'; then \
 992           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 993             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 994               install; \
 995         else \
 996           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 997             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 998             "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
 999         fi
1000 mostlyclean-generic:
1001
1002 clean-generic:
1003
1004 distclean-generic:
1005         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
1006         -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
1007
1008 maintainer-clean-generic:
1009         @echo "This command is intended for maintainers to use"
1010         @echo "it deletes files that may require special tools to rebuild."
1011 clean: clean-recursive
1012
1013 clean-am: clean-generic clean-libtool mostlyclean-am
1014
1015 distclean: distclean-recursive
1016         -rm -f $(am__CONFIG_DISTCLEAN_FILES)
1017         -rm -f Makefile
1018 distclean-am: clean-am distclean-generic distclean-hdr \
1019         distclean-libtool distclean-local distclean-tags
1020
1021 dvi: dvi-recursive
1022
1023 dvi-am:
1024
1025 html: html-recursive
1026
1027 html-am:
1028
1029 info: info-recursive
1030
1031 info-am:
1032
1033 install-data-am: install-extraHEADERS install-nodist_kernelHEADERS
1034
1035 install-dvi: install-dvi-recursive
1036
1037 install-dvi-am:
1038
1039 install-exec-am:
1040
1041 install-html: install-html-recursive
1042
1043 install-html-am:
1044
1045 install-info: install-info-recursive
1046
1047 install-info-am:
1048
1049 install-man:
1050
1051 install-pdf: install-pdf-recursive
1052
1053 install-pdf-am:
1054
1055 install-ps: install-ps-recursive
1056
1057 install-ps-am:
1058
1059 installcheck-am:
1060
1061 maintainer-clean: maintainer-clean-recursive
1062         -rm -f $(am__CONFIG_DISTCLEAN_FILES)
1063         -rm -rf $(top_srcdir)/autom4te.cache
1064         -rm -f Makefile
1065 maintainer-clean-am: distclean-am maintainer-clean-generic
1066
1067 mostlyclean: mostlyclean-recursive
1068
1069 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
1070
1071 pdf: pdf-recursive
1072
1073 pdf-am:
1074
1075 ps: ps-recursive
1076
1077 ps-am:
1078
1079 uninstall-am: uninstall-extraHEADERS uninstall-nodist_kernelHEADERS
1080
1081 .MAKE: $(am__recursive_targets) all install-am install-strip
1082
1083 .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
1084         am--refresh check check-am clean clean-cscope clean-generic \
1085         clean-libtool cscope cscopelist-am ctags ctags-am dist \
1086         dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \
1087         dist-tarZ dist-xz dist-zip distcheck distclean \
1088         distclean-generic distclean-hdr distclean-libtool \
1089         distclean-local distclean-tags distcleancheck distdir \
1090         distuninstallcheck dvi dvi-am html html-am info info-am \
1091         install install-am install-data install-data-am install-dvi \
1092         install-dvi-am install-exec install-exec-am \
1093         install-extraHEADERS install-html install-html-am install-info \
1094         install-info-am install-man install-nodist_kernelHEADERS \
1095         install-pdf install-pdf-am install-ps install-ps-am \
1096         install-strip installcheck installcheck-am installdirs \
1097         installdirs-am maintainer-clean maintainer-clean-generic \
1098         mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
1099         ps ps-am tags tags-am uninstall uninstall-am \
1100         uninstall-extraHEADERS uninstall-nodist_kernelHEADERS
1101
1102 .PRECIOUS: Makefile
1103
1104
1105 srpm-kmod:
1106         $(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}-kmod" \
1107                 def='${SRPM_DEFINE_COMMON} ${SRPM_DEFINE_KMOD}' srpm-common
1108
1109 srpm-dkms:
1110         $(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}-dkms" \
1111                 def='${SRPM_DEFINE_COMMON} ${SRPM_DEFINE_DKMS}' srpm-common
1112
1113 srpm-utils:
1114         $(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}" \
1115                 def='${SRPM_DEFINE_COMMON} ${SRPM_DEFINE_UTIL}' srpm-common
1116
1117 srpm: srpm-kmod srpm-dkms srpm-utils
1118 srpms: srpm-kmod srpm-dkms srpm-utils
1119
1120 rpm-kmod: srpm-kmod
1121         $(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}-kmod" \
1122                 def='${RPM_DEFINE_COMMON} ${RPM_DEFINE_KMOD}' rpm-common
1123
1124 rpm-dkms: srpm-dkms
1125         $(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}-dkms" \
1126                 def='${RPM_DEFINE_COMMON} ${RPM_DEFINE_DKMS}' rpm-common
1127
1128 rpm-utils: srpm-utils
1129         $(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}" \
1130                 def='${RPM_DEFINE_COMMON} ${RPM_DEFINE_UTIL}' rpm-common
1131
1132 rpm: rpm-kmod rpm-dkms rpm-utils
1133 rpms: rpm-kmod rpm-dkms rpm-utils
1134
1135 rpm-local:
1136         @(if test "${HAVE_RPMBUILD}" = "no"; then \
1137                 echo -e "\n" \
1138         "*** Required util ${RPMBUILD} missing.  Please install the\n" \
1139         "*** package for your distribution which provides ${RPMBUILD},\n" \
1140         "*** re-run configure, and try again.\n"; \
1141                 exit 1; \
1142         fi; \
1143         mkdir -p $(rpmbuild)/TMP && \
1144         mkdir -p $(rpmbuild)/BUILD && \
1145         mkdir -p $(rpmbuild)/RPMS && \
1146         mkdir -p $(rpmbuild)/SRPMS && \
1147         mkdir -p $(rpmbuild)/SPECS && \
1148         cp ${RPM_SPEC_DIR}/$(rpmspec) $(rpmbuild)/SPECS && \
1149         mkdir -p $(rpmbuild)/SOURCES && \
1150         cp $(top_srcdir)/scripts/kmodtool $(rpmbuild)/SOURCES && \
1151         cp $(distdir).tar.gz $(rpmbuild)/SOURCES)
1152
1153 srpm-common: dist
1154         @(dist=`$(RPM) --eval %{?dist}`; \
1155         rpmpkg=$(pkg)-$(VERSION)-$(RELEASE)$$dist*src.rpm; \
1156         rpmspec=$(pkg).spec; \
1157         rpmbuild=`mktemp -t -d $(PACKAGE)-build-$$USER-XXXXXXXX`; \
1158         $(MAKE) $(AM_MAKEFLAGS) \
1159                 rpmbuild="$$rpmbuild" \
1160                 rpmspec="$$rpmspec" \
1161                 rpm-local || exit 1; \
1162         LANG=C $(RPMBUILD) \
1163                 --define "_tmppath $$rpmbuild/TMP" \
1164                 --define "_topdir $$rpmbuild" \
1165                 $(def) -bs $$rpmbuild/SPECS/$$rpmspec || exit 1; \
1166         cp $$rpmbuild/SRPMS/$$rpmpkg . || exit 1; \
1167         rm -R $$rpmbuild)
1168
1169 rpm-common:
1170         @(dist=`$(RPM) --eval %{?dist}`; \
1171         rpmpkg=$(pkg)-$(VERSION)-$(RELEASE)$$dist*src.rpm; \
1172         rpmspec=$(pkg).spec; \
1173         rpmbuild=`mktemp -t -d $(PACKAGE)-build-$$USER-XXXXXXXX`; \
1174         $(MAKE) $(AM_MAKEFLAGS) \
1175                 rpmbuild="$$rpmbuild" \
1176                 rpmspec="$$rpmspec" \
1177                 rpm-local || exit 1; \
1178         LANG=C ${RPMBUILD} \
1179                 --define "_tmppath $$rpmbuild/TMP" \
1180                 --define "_topdir $$rpmbuild" \
1181                 $(def) --rebuild $$rpmpkg || exit 1; \
1182         cp $$rpmbuild/RPMS/*/* . || exit 1; \
1183         rm -R $$rpmbuild)
1184 deb-local:
1185         @(if test "${HAVE_DPKGBUILD}" = "no"; then \
1186                 echo -e "\n" \
1187         "*** Required util ${DPKGBUILD} missing.  Please install the\n" \
1188         "*** package for your distribution which provides ${DPKGBUILD},\n" \
1189         "*** re-run configure, and try again.\n"; \
1190                 exit 1; \
1191         fi; \
1192         if test "${HAVE_ALIEN}" = "no"; then \
1193                 echo -e "\n" \
1194         "*** Required util ${ALIEN} missing.  Please install the\n" \
1195         "*** package for your distribution which provides ${ALIEN},\n" \
1196         "*** re-run configure, and try again.\n"; \
1197                 exit 1; \
1198         fi)
1199
1200 deb-kmod: deb-local rpm-kmod
1201 @CONFIG_KERNEL_TRUE@    name=${PACKAGE}; \
1202 @CONFIG_KERNEL_TRUE@    version=${VERSION}-${RELEASE}; \
1203 @CONFIG_KERNEL_TRUE@    arch=`$(RPM) -qp $${name}-kmod-$${version}.src.rpm --qf %{arch} | tail -1`; \
1204 @CONFIG_KERNEL_TRUE@    pkg1=kmod-$${name}*$${version}.$${arch}.rpm; \
1205 @CONFIG_KERNEL_TRUE@    fakeroot $(ALIEN) --bump=0 --scripts --to-deb $$pkg1; \
1206 @CONFIG_KERNEL_TRUE@    $(RM) $$pkg1
1207
1208 deb-utils: deb-local rpm-utils
1209 @CONFIG_USER_TRUE@      name=${PACKAGE}; \
1210 @CONFIG_USER_TRUE@      version=${VERSION}-${RELEASE}; \
1211 @CONFIG_USER_TRUE@      arch=`$(RPM) -qp $${name}-$${version}.src.rpm --qf %{arch} | tail -1`; \
1212 @CONFIG_USER_TRUE@      pkg1=$${name}-$${version}.$${arch}.rpm; \
1213 @CONFIG_USER_TRUE@      pkg2=libnvpair1-$${version}.$${arch}.rpm; \
1214 @CONFIG_USER_TRUE@      pkg3=libuutil1-$${version}.$${arch}.rpm; \
1215 @CONFIG_USER_TRUE@      pkg4=libzfs2-$${version}.$${arch}.rpm; \
1216 @CONFIG_USER_TRUE@      pkg5=libzpool2-$${version}.$${arch}.rpm; \
1217 @CONFIG_USER_TRUE@      pkg6=libzfs2-devel-$${version}.$${arch}.rpm; \
1218 @CONFIG_USER_TRUE@      pkg7=$${name}-test-$${version}.$${arch}.rpm; \
1219 @CONFIG_USER_TRUE@      pkg8=$${name}-dracut-$${version}.$${arch}.rpm; \
1220 @CONFIG_USER_TRUE@      pkg9=$${name}-initramfs-$${version}.$${arch}.rpm; \
1221 @CONFIG_USER_TRUE@      fakeroot $(ALIEN) --bump=0 --scripts --to-deb \
1222 @CONFIG_USER_TRUE@          $$pkg1 $$pkg2 $$pkg3 $$pkg4 $$pkg5 $$pkg6 $$pkg7 \
1223 @CONFIG_USER_TRUE@          $$pkg8 $$pkg9;
1224 @CONFIG_USER_TRUE@      $(RM) $$pkg1 $$pkg2 $$pkg3 $$pkg4 $$pkg5 $$pkg6 $$pkg7 \
1225 @CONFIG_USER_TRUE@          $$pkg8 $$pkg9;
1226
1227 deb: deb-kmod deb-utils
1228 tgz-local:
1229         @(if test "${HAVE_ALIEN}" = "no"; then \
1230                 echo -e "\n" \
1231         "*** Required util ${ALIEN} missing.  Please install the\n" \
1232         "*** package for your distribution which provides ${ALIEN},\n" \
1233         "*** re-run configure, and try again.\n"; \
1234                 exit 1; \
1235         fi)
1236
1237 tgz-kmod: tgz-local rpm-kmod
1238 @CONFIG_KERNEL_TRUE@    name=${PACKAGE}; \
1239 @CONFIG_KERNEL_TRUE@    version=${VERSION}-${RELEASE}; \
1240 @CONFIG_KERNEL_TRUE@    arch=`$(RPM) -qp $${name}-kmod-$${version}.src.rpm --qf %{arch} | tail -1`; \
1241 @CONFIG_KERNEL_TRUE@    pkg1=kmod-$${name}*$${version}.$${arch}.rpm; \
1242 @CONFIG_KERNEL_TRUE@    fakeroot $(ALIEN) --scripts --to-tgz $$pkg1; \
1243 @CONFIG_KERNEL_TRUE@    $(RM) $$pkg1
1244
1245 tgz-utils: tgz-local rpm-utils
1246 @CONFIG_USER_TRUE@      name=${PACKAGE}; \
1247 @CONFIG_USER_TRUE@      version=${VERSION}-${RELEASE}; \
1248 @CONFIG_USER_TRUE@      arch=`$(RPM) -qp $${name}-$${version}.src.rpm --qf %{arch} | tail -1`; \
1249 @CONFIG_USER_TRUE@      pkg1=$${name}-$${version}.$${arch}.rpm; \
1250 @CONFIG_USER_TRUE@      pkg2=$${name}-devel-$${version}.$${arch}.rpm; \
1251 @CONFIG_USER_TRUE@      pkg3=$${name}-test-$${version}.$${arch}.rpm; \
1252 @CONFIG_USER_TRUE@      fakeroot $(ALIEN) --scripts --to-tgz $$pkg1 $$pkg2 $$pkg3; \
1253 @CONFIG_USER_TRUE@      $(RM) $$pkg1 $$pkg2 $$pkg3
1254
1255 tgz: tgz-kmod tgz-utils
1256
1257 distclean-local::
1258         -$(RM) -R autom4te*.cache
1259         -find . \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS \
1260                 -o -name .pc -o -name .hg -o -name .git \) -prune -o \
1261                 \( -name '*.orig' -o -name '*.rej' -o -name '*~' \
1262                 -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
1263                 -o -name '.*.rej' -o -name '.script-config' -o -size 0 \
1264                 -o -name '*%' -o -name '.*.cmd' -o -name 'core' \
1265                 -o -name 'Makefile' -o -name 'Module.symvers' \
1266                 -o -name '*.order' -o -name '*.markers' \) \
1267                 -type f -print | xargs $(RM)
1268
1269 dist-hook:
1270         sed -i 's/Release:[[:print:]]*/Release:      $(RELEASE)/' \
1271                 $(distdir)/META
1272
1273 checkstyle: cstyle shellcheck
1274
1275 cstyle:
1276         @find ${top_srcdir} -name '*.[hc]' ! -name 'zfs_config.*' \
1277                 ! -name '*.mod.c' -type f -exec scripts/cstyle.pl {} \+
1278
1279 shellcheck:
1280         @if type shellcheck > /dev/null 2>&1; then \
1281                 (find ${top_srcdir} -type f -name '*.sh.in' -o -type f \
1282                  -name '*.sh'; find etc/init.d/zfs*.in -type f) | \
1283                  grep -v 'zfs-script-config' | \
1284                  while read file; do \
1285                         shellcheck --format gcc "$$file"; \
1286                  done; \
1287          fi
1288
1289 ctags:
1290         $(RM) tags
1291         find $(top_srcdir) -name .git -prune -o -name '*.[hc]' | xargs ctags
1292
1293 etags:
1294         $(RM) TAGS
1295         find $(top_srcdir) -name .pc -prune -o -name '*.[hc]' | xargs etags -a
1296
1297 tags: ctags etags
1298
1299 pkg: @DEFAULT_PACKAGE@
1300 pkg-kmod: @DEFAULT_PACKAGE@-kmod
1301 pkg-utils: @DEFAULT_PACKAGE@-utils
1302
1303 # Tell versions [3.59,3.63) of GNU make to not export all variables.
1304 # Otherwise a system limit (for SysV at least) may be exceeded.
1305 .NOEXPORT: