zfs/Makefile.in

   1 # Makefile.in generated by automake 1.15 from Makefile.am.
   2 # @configure_input@
   3
   4 # Copyright (C) 1994-2014 Free Software Foundation, Inc.
   5
   6 # This Makefile.in is free software; the Free Software Foundation
   7 # gives unlimited permission to copy and/or distribute it,
   8 # with or without modifications, as long as this notice is preserved.
   9
  10 # This program is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  12 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  13 # PARTICULAR PURPOSE.
  14
  15 @SET_MAKE@
  16
  17 ###############################################################################
  18 # Copyright (C) 2007-2013 Lawrence Livermore National Security, LLC.
  19 # Copyright (C) 2007 The Regents of the University of California.
  20 # Written by Brian Behlendorf <behlendorf1@llnl.gov>.
  21 ###############################################################################
  22 # Build targets for RPM packages.
  23 ###############################################################################
  24
  25 VPATH = @srcdir@
  26 am__is_gnu_make = { \
  27   if test -z '$(MAKELEVEL)'; then \
  28     false; \
  29   elif test -n '$(MAKE_HOST)'; then \
  30     true; \
  31   elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
  32     true; \
  33   else \
  34     false; \
  35   fi; \
  36 }
  37 am__make_running_with_option = \
  38   case $${target_option-} in \
  39       ?) ;; \
  40       *) echo "am__make_running_with_option: internal error: invalid" \
  41               "target option '$${target_option-}' specified" >&2; \
  42          exit 1;; \
  43   esac; \
  44   has_opt=no; \
  45   sane_makeflags=$$MAKEFLAGS; \
  46   if $(am__is_gnu_make); then \
  47     sane_makeflags=$$MFLAGS; \
  48   else \
  49     case $$MAKEFLAGS in \
  50       *\\[\ \   ]*) \
  51         bs=\\; \
  52         sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
  53           | sed "s/$$bs$$bs[$$bs $$bs   ]*//g"`;; \
  54     esac; \
  55   fi; \
  56   skip_next=no; \
  57   strip_trailopt () \
  58   { \
  59     flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  60   }; \
  61   for flg in $$sane_makeflags; do \
  62     test $$skip_next = yes && { skip_next=no; continue; }; \
  63     case $$flg in \
  64       *=*|--*) continue;; \
  65         -*I) strip_trailopt 'I'; skip_next=yes;; \
  66       -*I?*) strip_trailopt 'I';; \
  67         -*O) strip_trailopt 'O'; skip_next=yes;; \
  68       -*O?*) strip_trailopt 'O';; \
  69         -*l) strip_trailopt 'l'; skip_next=yes;; \
  70       -*l?*) strip_trailopt 'l';; \
  71       -[dEDm]) skip_next=yes;; \
  72       -[JT]) skip_next=yes;; \
  73     esac; \
  74     case $$flg in \
  75       *$$target_option*) has_opt=yes; break;; \
  76     esac; \
  77   done; \
  78   test $$has_opt = yes
  79 am__make_dryrun = (target_option=n; $(am__make_running_with_option))
  80 am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
  81 pkgdatadir = $(datadir)/@PACKAGE@
  82 pkgincludedir = $(includedir)/@PACKAGE@
  83 pkglibdir = $(libdir)/@PACKAGE@
  84 pkglibexecdir = $(libexecdir)/@PACKAGE@
  85 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  86 install_sh_DATA = $(install_sh) -c -m 644
  87 install_sh_PROGRAM = $(install_sh) -c
  88 install_sh_SCRIPT = $(install_sh) -c
  89 INSTALL_HEADER = $(INSTALL_DATA)
  90 transform = $(program_transform_name)
  91 NORMAL_INSTALL = :
  92 PRE_INSTALL = :
  93 POST_INSTALL = :
  94 NORMAL_UNINSTALL = :
  95 PRE_UNINSTALL = :
  96 POST_UNINSTALL = :
  97 build_triplet = @build@
  98 host_triplet = @host@
  99 target_triplet = @target@
 100 subdir = .
 101 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 102 am__aclocal_m4_deps = $(top_srcdir)/config/always-no-bool-compare.m4 \
 103         $(top_srcdir)/config/always-no-unused-but-set-variable.m4 \
 104         $(top_srcdir)/config/dkms.m4 \
 105         $(top_srcdir)/config/kernel-acl.m4 \
 106         $(top_srcdir)/config/kernel-aio-fsync.m4 \
 107         $(top_srcdir)/config/kernel-automount.m4 \
 108         $(top_srcdir)/config/kernel-bdev-block-device-operations.m4 \
 109         $(top_srcdir)/config/kernel-bdev-logical-size.m4 \
 110         $(top_srcdir)/config/kernel-bdev-physical-size.m4 \
 111         $(top_srcdir)/config/kernel-bdi-setup-and-register.m4 \
 112         $(top_srcdir)/config/kernel-bio-bvec-iter.m4 \
 113         $(top_srcdir)/config/kernel-bio-end-io-t-args.m4 \
 114         $(top_srcdir)/config/kernel-bio-failfast.m4 \
 115         $(top_srcdir)/config/kernel-bio-op.m4 \
 116         $(top_srcdir)/config/kernel-bio-rw-barrier.m4 \
 117         $(top_srcdir)/config/kernel-bio-rw-discard.m4 \
 118         $(top_srcdir)/config/kernel-blk-queue-flush.m4 \
 119         $(top_srcdir)/config/kernel-blk-queue-max-hw-sectors.m4 \
 120         $(top_srcdir)/config/kernel-blk-queue-max-segments.m4 \
 121         $(top_srcdir)/config/kernel-blk-queue-unplug.m4 \
 122         $(top_srcdir)/config/kernel-blkdev-get-by-path.m4 \
 123         $(top_srcdir)/config/kernel-blkdev-get.m4 \
 124         $(top_srcdir)/config/kernel-block-device-operations-release-void.m4 \
 125         $(top_srcdir)/config/kernel-check-disk-size-change.m4 \
 126         $(top_srcdir)/config/kernel-clear-inode.m4 \
 127         $(top_srcdir)/config/kernel-commit-metadata.m4 \
 128         $(top_srcdir)/config/kernel-create-nameidata.m4 \
 129         $(top_srcdir)/config/kernel-current_bio_tail.m4 \
 130         $(top_srcdir)/config/kernel-d-make-root.m4 \
 131         $(top_srcdir)/config/kernel-d-obtain-alias.m4 \
 132         $(top_srcdir)/config/kernel-d-prune-aliases.m4 \
 133         $(top_srcdir)/config/kernel-declare-event-class.m4 \
 134         $(top_srcdir)/config/kernel-dentry-operations.m4 \
 135         $(top_srcdir)/config/kernel-dirty-inode.m4 \
 136         $(top_srcdir)/config/kernel-discard-granularity.m4 \
 137         $(top_srcdir)/config/kernel-elevator-change.m4 \
 138         $(top_srcdir)/config/kernel-encode-fh-inode.m4 \
 139         $(top_srcdir)/config/kernel-evict-inode.m4 \
 140         $(top_srcdir)/config/kernel-fallocate.m4 \
 141         $(top_srcdir)/config/kernel-file-inode.m4 \
 142         $(top_srcdir)/config/kernel-fmode-t.m4 \
 143         $(top_srcdir)/config/kernel-follow-down-one.m4 \
 144         $(top_srcdir)/config/kernel-fsync.m4 \
 145         $(top_srcdir)/config/kernel-generic_io_acct.m4 \
 146         $(top_srcdir)/config/kernel-generic_readlink.m4 \
 147         $(top_srcdir)/config/kernel-get-disk-ro.m4 \
 148         $(top_srcdir)/config/kernel-get-gendisk.m4 \
 149         $(top_srcdir)/config/kernel-get-link.m4 \
 150         $(top_srcdir)/config/kernel-inode-getattr.m4 \
 151         $(top_srcdir)/config/kernel-insert-inode-locked.m4 \
 152         $(top_srcdir)/config/kernel-invalidate-bdev-args.m4 \
 153         $(top_srcdir)/config/kernel-is_owner_or_cap.m4 \
 154         $(top_srcdir)/config/kernel-kmap-atomic-args.m4 \
 155         $(top_srcdir)/config/kernel-kobj-name-len.m4 \
 156         $(top_srcdir)/config/kernel-lookup-bdev.m4 \
 157         $(top_srcdir)/config/kernel-lookup-nameidata.m4 \
 158         $(top_srcdir)/config/kernel-lseek-execute.m4 \
 159         $(top_srcdir)/config/kernel-mk-request-fn.m4 \
 160         $(top_srcdir)/config/kernel-mkdir-umode-t.m4 \
 161         $(top_srcdir)/config/kernel-mount-nodev.m4 \
 162         $(top_srcdir)/config/kernel-open-bdev-exclusive.m4 \
 163         $(top_srcdir)/config/kernel-put-link.m4 \
 164         $(top_srcdir)/config/kernel-rename.m4 \
 165         $(top_srcdir)/config/kernel-security-inode-init.m4 \
 166         $(top_srcdir)/config/kernel-set-nlink.m4 \
 167         $(top_srcdir)/config/kernel-setattr-prepare.m4 \
 168         $(top_srcdir)/config/kernel-sget-args.m4 \
 169         $(top_srcdir)/config/kernel-show-options.m4 \
 170         $(top_srcdir)/config/kernel-shrink.m4 \
 171         $(top_srcdir)/config/kernel-submit_bio.m4 \
 172         $(top_srcdir)/config/kernel-truncate-range.m4 \
 173         $(top_srcdir)/config/kernel-truncate-setsize.m4 \
 174         $(top_srcdir)/config/kernel-vfs-iterate.m4 \
 175         $(top_srcdir)/config/kernel-vfs-rw-iterate.m4 \
 176         $(top_srcdir)/config/kernel-xattr-handler.m4 \
 177         $(top_srcdir)/config/kernel.m4 $(top_srcdir)/config/libtool.m4 \
 178         $(top_srcdir)/config/ltoptions.m4 \
 179         $(top_srcdir)/config/ltsugar.m4 \
 180         $(top_srcdir)/config/ltversion.m4 \
 181         $(top_srcdir)/config/lt~obsolete.m4 \
 182         $(top_srcdir)/config/mount-helper.m4 \
 183         $(top_srcdir)/config/user-arch.m4 \
 184         $(top_srcdir)/config/user-dracut.m4 \
 185         $(top_srcdir)/config/user-frame-larger-than.m4 \
 186         $(top_srcdir)/config/user-libblkid.m4 \
 187         $(top_srcdir)/config/user-libuuid.m4 \
 188         $(top_srcdir)/config/user-runstatedir.m4 \
 189         $(top_srcdir)/config/user-systemd.m4 \
 190         $(top_srcdir)/config/user-sysvinit.m4 \
 191         $(top_srcdir)/config/user-udev.m4 \
 192         $(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
 193         $(top_srcdir)/config/zfs-build.m4 \
 194         $(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
 195 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 196         $(ACLOCAL_M4)
 197 DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
 198         $(am__configure_deps) $(am__extra_HEADERS_DIST) \
 199         $(am__DIST_COMMON)
 200 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 201  configure.lineno config.status.lineno
 202 mkinstalldirs = $(install_sh) -d
 203 CONFIG_HEADER = zfs_config.h
 204 CONFIG_CLEAN_FILES = module/Makefile module/avl/Makefile \
 205         module/nvpair/Makefile module/unicode/Makefile \
 206         module/zcommon/Makefile module/zfs/Makefile \
 207         module/zpios/Makefile zfs.release
 208 CONFIG_CLEAN_VPATH_FILES =
 209 AM_V_P = $(am__v_P_@AM_V@)
 210 am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
 211 am__v_P_0 = false
 212 am__v_P_1 = :
 213 AM_V_GEN = $(am__v_GEN_@AM_V@)
 214 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
 215 am__v_GEN_0 = @echo "  GEN     " $@;
 216 am__v_GEN_1 =
 217 AM_V_at = $(am__v_at_@AM_V@)
 218 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
 219 am__v_at_0 = @
 220 am__v_at_1 =
 221 SOURCES =
 222 DIST_SOURCES =
 223 RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
 224         ctags-recursive dvi-recursive html-recursive info-recursive \
 225         install-data-recursive install-dvi-recursive \
 226         install-exec-recursive install-html-recursive \
 227         install-info-recursive install-pdf-recursive \
 228         install-ps-recursive install-recursive installcheck-recursive \
 229         installdirs-recursive pdf-recursive ps-recursive \
 230         tags-recursive uninstall-recursive
 231 am__can_run_installinfo = \
 232   case $$AM_UPDATE_INFO_DIR in \
 233     n|no|NO) false;; \
 234     *) (install-info --version) >/dev/null 2>&1;; \
 235   esac
 236 am__extra_HEADERS_DIST = zfs.release.in zfs_config.h.in
 237 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 238 am__vpath_adj = case $$p in \
 239     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
 240     *) f=$$p;; \
 241   esac;
 242 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
 243 am__install_max = 40
 244 am__nobase_strip_setup = \
 245   srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
 246 am__nobase_strip = \
 247   for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
 248 am__nobase_list = $(am__nobase_strip_setup); \
 249   for p in $$list; do echo "$$p $$p"; done | \
 250   sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
 251   $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
 252     if (++n[$$2] == $(am__install_max)) \
 253       { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
 254     END { for (dir in files) print dir, files[dir] }'
 255 am__base_list = \
 256   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
 257   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 258 am__uninstall_files_from_dir = { \
 259   test -z "$$files" \
 260     || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
 261     || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
 262          $(am__cd) "$$dir" && rm -f $$files; }; \
 263   }
 264 am__installdirs = "$(DESTDIR)$(extradir)" "$(DESTDIR)$(kerneldir)"
 265 HEADERS = $(extra_HEADERS) $(nodist_kernel_HEADERS)
 266 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
 267   distclean-recursive maintainer-clean-recursive
 268 am__recursive_targets = \
 269   $(RECURSIVE_TARGETS) \
 270   $(RECURSIVE_CLEAN_TARGETS) \
 271   $(am__extra_recursive_targets)
 272 AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
 273         cscope distdir dist dist-all distcheck
 274 am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
 275         $(LISP)zfs_config.h.in
 276 # Read a list of newline-separated strings from the standard input,
 277 # and print each of them once, without duplicates.  Input order is
 278 # *not* preserved.
 279 am__uniquify_input = $(AWK) '\
 280   BEGIN { nonempty = 0; } \
 281   { items[$$0] = 1; nonempty = 1; } \
 282   END { if (nonempty) { for (i in items) print i; }; } \
 283 '
 284 # Make sure the list of sources is unique.  This is necessary because,
 285 # e.g., the same source file might be shared among _SOURCES variables
 286 # for different programs/libraries.
 287 am__define_uniq_tagged_files = \
 288   list='$(am__tagged_files)'; \
 289   unique=`for i in $$list; do \
 290     if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 291   done | $(am__uniquify_input)`
 292 ETAGS = etags
 293 CTAGS = ctags
 294 CSCOPE = cscope
 295 DIST_SUBDIRS = module include
 296 am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config/deb.am \
 297         $(srcdir)/config/rpm.am $(srcdir)/config/tgz.am \
 298         $(srcdir)/zfs.release.in $(srcdir)/zfs_config.h.in \
 299         $(top_srcdir)/config/compile $(top_srcdir)/config/config.guess \
 300         $(top_srcdir)/config/config.sub \
 301         $(top_srcdir)/config/install-sh $(top_srcdir)/config/ltmain.sh \
 302         $(top_srcdir)/config/missing $(top_srcdir)/module/Makefile.in \
 303         $(top_srcdir)/module/avl/Makefile.in \
 304         $(top_srcdir)/module/nvpair/Makefile.in \
 305         $(top_srcdir)/module/unicode/Makefile.in \
 306         $(top_srcdir)/module/zcommon/Makefile.in \
 307         $(top_srcdir)/module/zfs/Makefile.in \
 308         $(top_srcdir)/module/zpios/Makefile.in AUTHORS config/compile \
 309         config/config.guess config/config.sub config/install-sh \
 310         config/ltmain.sh config/missing
 311 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 312 distdir = $(PACKAGE)-$(VERSION)
 313 top_distdir = $(distdir)
 314 am__remove_distdir = \
 315   if test -d "$(distdir)"; then \
 316     find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
 317       && rm -rf "$(distdir)" \
 318       || { sleep 5 && rm -rf "$(distdir)"; }; \
 319   else :; fi
 320 am__post_remove_distdir = $(am__remove_distdir)
 321 am__relativize = \
 322   dir0=`pwd`; \
 323   sed_first='s,^\([^/]*\)/.*$$,\1,'; \
 324   sed_rest='s,^[^/]*/*,,'; \
 325   sed_last='s,^.*/\([^/]*\)$$,\1,'; \
 326   sed_butlast='s,/*[^/]*$$,,'; \
 327   while test -n "$$dir1"; do \
 328     first=`echo "$$dir1" | sed -e "$$sed_first"`; \
 329     if test "$$first" != "."; then \
 330       if test "$$first" = ".."; then \
 331         dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
 332         dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
 333       else \
 334         first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
 335         if test "$$first2" = "$$first"; then \
 336           dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
 337         else \
 338           dir2="../$$dir2"; \
 339         fi; \
 340         dir0="$$dir0"/"$$first"; \
 341       fi; \
 342     fi; \
 343     dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
 344   done; \
 345   reldir="$$dir2"
 346 DIST_ARCHIVES = $(distdir).tar.gz
 347 GZIP_ENV = --best
 348 DIST_TARGETS = dist-gzip
 349 distuninstallcheck_listfiles = find . -type f -print
 350 am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
 351   | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
 352 distcleancheck_listfiles = find . -type f -print
 353 ACLOCAL = @ACLOCAL@
 354 ALIEN = @ALIEN@
 355 ALIEN_VERSION = @ALIEN_VERSION@
 356 AMTAR = @AMTAR@
 357 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 358 AR = @AR@
 359 AUTOCONF = @AUTOCONF@
 360 AUTOHEADER = @AUTOHEADER@
 361 AUTOMAKE = @AUTOMAKE@
 362 AWK = @AWK@
 363 CC = @CC@
 364 CCAS = @CCAS@
 365 CCASDEPMODE = @CCASDEPMODE@
 366 CCASFLAGS = @CCASFLAGS@
 367 CCDEPMODE = @CCDEPMODE@
 368 CFLAGS = @CFLAGS@
 369 CPP = @CPP@
 370 CPPFLAGS = @CPPFLAGS@
 371 CYGPATH_W = @CYGPATH_W@
 372 DEBUG_CFLAGS = @DEBUG_CFLAGS@
 373 DEBUG_DMU_TX = @DEBUG_DMU_TX@
 374 DEBUG_STACKFLAGS = @DEBUG_STACKFLAGS@
 375 DEBUG_ZFS = @DEBUG_ZFS@
 376 DEFAULT_INITCONF_DIR = @DEFAULT_INITCONF_DIR@
 377 DEFAULT_INIT_DIR = @DEFAULT_INIT_DIR@
 378 DEFAULT_INIT_SCRIPT = @DEFAULT_INIT_SCRIPT@
 379 DEFAULT_PACKAGE = @DEFAULT_PACKAGE@
 380 DEFINE_INITRAMFS = @DEFINE_INITRAMFS@
 381 DEFS = @DEFS@
 382 DEPDIR = @DEPDIR@
 383 DLLTOOL = @DLLTOOL@
 384 DPKG = @DPKG@
 385 DPKGBUILD = @DPKGBUILD@
 386 DPKGBUILD_VERSION = @DPKGBUILD_VERSION@
 387 DPKG_VERSION = @DPKG_VERSION@
 388 DSYMUTIL = @DSYMUTIL@
 389 DUMPBIN = @DUMPBIN@
 390 ECHO_C = @ECHO_C@
 391 ECHO_N = @ECHO_N@
 392 ECHO_T = @ECHO_T@
 393 EGREP = @EGREP@
 394 EXEEXT = @EXEEXT@
 395 FGREP = @FGREP@
 396 FRAME_LARGER_THAN = @FRAME_LARGER_THAN@
 397 GREP = @GREP@
 398 HAVE_ALIEN = @HAVE_ALIEN@
 399 HAVE_DPKG = @HAVE_DPKG@
 400 HAVE_DPKGBUILD = @HAVE_DPKGBUILD@
 401 HAVE_RPM = @HAVE_RPM@
 402 HAVE_RPMBUILD = @HAVE_RPMBUILD@
 403 INSTALL = @INSTALL@
 404 INSTALL_DATA = @INSTALL_DATA@
 405 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 406 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 407 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 408 KERNELCPPFLAGS = @KERNELCPPFLAGS@
 409 KERNELMAKE_PARAMS = @KERNELMAKE_PARAMS@
 410 LD = @LD@
 411 LDFLAGS = @LDFLAGS@
 412 LIBBLKID = @LIBBLKID@
 413 LIBOBJS = @LIBOBJS@
 414 LIBS = @LIBS@
 415 LIBTOOL = @LIBTOOL@
 416 LIBUUID = @LIBUUID@
 417 LINUX = @LINUX@
 418 LINUX_OBJ = @LINUX_OBJ@
 419 LINUX_SYMBOLS = @LINUX_SYMBOLS@
 420 LINUX_VERSION = @LINUX_VERSION@
 421 LIPO = @LIPO@
 422 LN_S = @LN_S@
 423 LTLIBOBJS = @LTLIBOBJS@
 424 LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
 425 MAINT = @MAINT@
 426 MAKEINFO = @MAKEINFO@
 427 MANIFEST_TOOL = @MANIFEST_TOOL@
 428 MKDIR_P = @MKDIR_P@
 429 NM = @NM@
 430 NMEDIT = @NMEDIT@
 431 NO_BOOL_COMPARE = @NO_BOOL_COMPARE@
 432 NO_UNUSED_BUT_SET_VARIABLE = @NO_UNUSED_BUT_SET_VARIABLE@
 433 OBJDUMP = @OBJDUMP@
 434 OBJEXT = @OBJEXT@
 435 OTOOL = @OTOOL@
 436 OTOOL64 = @OTOOL64@
 437 PACKAGE = @PACKAGE@
 438 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 439 PACKAGE_NAME = @PACKAGE_NAME@
 440 PACKAGE_STRING = @PACKAGE_STRING@
 441 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 442 PACKAGE_URL = @PACKAGE_URL@
 443 PACKAGE_VERSION = @PACKAGE_VERSION@
 444 PATH_SEPARATOR = @PATH_SEPARATOR@
 445 RANLIB = @RANLIB@
 446 RELEASE = @RELEASE@
 447 RPM = @RPM@
 448 RPMBUILD = @RPMBUILD@
 449 RPMBUILD_VERSION = @RPMBUILD_VERSION@
 450 RPM_DEFINE_COMMON = @RPM_DEFINE_COMMON@
 451 RPM_DEFINE_DKMS = @RPM_DEFINE_DKMS@
 452 RPM_DEFINE_KMOD = @RPM_DEFINE_KMOD@
 453 RPM_DEFINE_UTIL = @RPM_DEFINE_UTIL@
 454 RPM_SPEC_DIR = @RPM_SPEC_DIR@
 455 RPM_VERSION = @RPM_VERSION@
 456 SED = @SED@
 457 SET_MAKE = @SET_MAKE@
 458 SHELL = @SHELL@
 459 SPL = @SPL@
 460 SPL_OBJ = @SPL_OBJ@
 461 SPL_SYMBOLS = @SPL_SYMBOLS@
 462 SPL_VERSION = @SPL_VERSION@
 463 SRPM_DEFINE_COMMON = @SRPM_DEFINE_COMMON@
 464 SRPM_DEFINE_DKMS = @SRPM_DEFINE_DKMS@
 465 SRPM_DEFINE_KMOD = @SRPM_DEFINE_KMOD@
 466 SRPM_DEFINE_UTIL = @SRPM_DEFINE_UTIL@
 467 STRIP = @STRIP@
 468 TARGET_ASM_DIR = @TARGET_ASM_DIR@
 469 VENDOR = @VENDOR@
 470 VERSION = @VERSION@
 471 ZFS_CONFIG = @ZFS_CONFIG@
 472 ZFS_INIT_SYSTEMD = @ZFS_INIT_SYSTEMD@
 473 ZFS_INIT_SYSV = @ZFS_INIT_SYSV@
 474 ZFS_META_ALIAS = @ZFS_META_ALIAS@
 475 ZFS_META_AUTHOR = @ZFS_META_AUTHOR@
 476 ZFS_META_DATA = @ZFS_META_DATA@
 477 ZFS_META_LICENSE = @ZFS_META_LICENSE@
 478 ZFS_META_LT_AGE = @ZFS_META_LT_AGE@
 479 ZFS_META_LT_CURRENT = @ZFS_META_LT_CURRENT@
 480 ZFS_META_LT_REVISION = @ZFS_META_LT_REVISION@
 481 ZFS_META_NAME = @ZFS_META_NAME@
 482 ZFS_META_RELEASE = @ZFS_META_RELEASE@
 483 ZFS_META_VERSION = @ZFS_META_VERSION@
 484 ZFS_MODULE_LOAD = @ZFS_MODULE_LOAD@
 485 ZLIB = @ZLIB@
 486 abs_builddir = @abs_builddir@
 487 abs_srcdir = @abs_srcdir@
 488 abs_top_builddir = @abs_top_builddir@
 489 abs_top_srcdir = @abs_top_srcdir@
 490 ac_ct_AR = @ac_ct_AR@
 491 ac_ct_CC = @ac_ct_CC@
 492 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 493 am__include = @am__include@
 494 am__leading_dot = @am__leading_dot@
 495 am__quote = @am__quote@
 496 am__tar = @am__tar@
 497 am__untar = @am__untar@
 498 bindir = @bindir@
 499 build = @build@
 500 build_alias = @build_alias@
 501 build_cpu = @build_cpu@
 502 build_os = @build_os@
 503 build_vendor = @build_vendor@
 504 builddir = @builddir@
 505 datadir = @datadir@
 506 datarootdir = @datarootdir@
 507 docdir = @docdir@
 508 dracutdir = @dracutdir@
 509 dvidir = @dvidir@
 510 exec_prefix = @exec_prefix@
 511 host = @host@
 512 host_alias = @host_alias@
 513 host_cpu = @host_cpu@
 514 host_os = @host_os@
 515 host_vendor = @host_vendor@
 516 htmldir = @htmldir@
 517 includedir = @includedir@
 518 infodir = @infodir@
 519 install_sh = @install_sh@
 520 libdir = @libdir@
 521 libexecdir = @libexecdir@
 522 localedir = @localedir@
 523 localstatedir = @localstatedir@
 524 mandir = @mandir@
 525 mkdir_p = @mkdir_p@
 526 modulesloaddir = @modulesloaddir@
 527 mounthelperdir = @mounthelperdir@
 528 oldincludedir = @oldincludedir@
 529 pdfdir = @pdfdir@
 530 prefix = @prefix@
 531 program_transform_name = @program_transform_name@
 532 psdir = @psdir@
 533 runstatedir = @runstatedir@
 534 sbindir = @sbindir@
 535 sharedstatedir = @sharedstatedir@
 536 srcdir = @srcdir@
 537 sysconfdir = @sysconfdir@
 538 systemdpresetdir = @systemdpresetdir@
 539 systemdunitdir = @systemdunitdir@
 540 target = @target@
 541 target_alias = @target_alias@
 542 target_cpu = @target_cpu@
 543 target_os = @target_os@
 544 target_vendor = @target_vendor@
 545 top_build_prefix = @top_build_prefix@
 546 top_builddir = @top_builddir@
 547 top_srcdir = @top_srcdir@
 548 udevdir = @udevdir@
 549 udevruledir = @udevruledir@
 550 ACLOCAL_AMFLAGS = -I config
 551 @CONFIG_KERNEL_TRUE@SUBDIRS = module include
 552 @CONFIG_KERNEL_TRUE@extradir = @prefix@/src/zfs-$(VERSION)
 553 @CONFIG_KERNEL_TRUE@extra_HEADERS = zfs.release.in zfs_config.h.in
 554 @CONFIG_KERNEL_TRUE@kerneldir = @prefix@/src/zfs-$(VERSION)/$(LINUX_VERSION)
 555 @CONFIG_KERNEL_TRUE@nodist_kernel_HEADERS = zfs.release zfs_config.h module/$(LINUX_SYMBOLS)
 556 AUTOMAKE_OPTIONS = foreign
 557 EXTRA_DIST = autogen.sh copy-builtin config/config.awk config/rpm.am \
 558         config/deb.am config/tgz.am META DISCLAIMER COPYRIGHT \
 559         README.markdown OPENSOLARIS.LICENSE
 560 all: zfs_config.h
 561         $(MAKE) $(AM_MAKEFLAGS) all-recursive
 562
 563 .SUFFIXES:
 564 am--refresh: Makefile
 565         @:
 566 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/config/rpm.am $(srcdir)/config/deb.am $(srcdir)/config/tgz.am $(am__configure_deps)
 567         @for dep in $?; do \
 568           case '$(am__configure_deps)' in \
 569             *$$dep*) \
 570               echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
 571               $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
 572                 && exit 0; \
 573               exit 1;; \
 574           esac; \
 575         done; \
 576         echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
 577         $(am__cd) $(top_srcdir) && \
 578           $(AUTOMAKE) --foreign Makefile
 579 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 580         @case '$?' in \
 581           *config.status*) \
 582             echo ' $(SHELL) ./config.status'; \
 583             $(SHELL) ./config.status;; \
 584           *) \
 585             echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
 586             cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
 587         esac;
 588 $(srcdir)/config/rpm.am $(srcdir)/config/deb.am $(srcdir)/config/tgz.am $(am__empty):
 589
 590 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 591         $(SHELL) ./config.status --recheck
 592
 593 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 594         $(am__cd) $(srcdir) && $(AUTOCONF)
 595 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 596         $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
 597 $(am__aclocal_m4_deps):
 598
 599 zfs_config.h: stamp-h1
 600         @test -f $@ || rm -f stamp-h1
 601         @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
 602
 603 stamp-h1: $(srcdir)/zfs_config.h.in $(top_builddir)/config.status
 604         @rm -f stamp-h1
 605         cd $(top_builddir) && $(SHELL) ./config.status zfs_config.h
 606 $(srcdir)/zfs_config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 607         ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
 608         rm -f stamp-h1
 609         touch $@
 610
 611 distclean-hdr:
 612         -rm -f zfs_config.h stamp-h1
 613 module/Makefile: $(top_builddir)/config.status $(top_srcdir)/module/Makefile.in
 614         cd $(top_builddir) && $(SHELL) ./config.status $@
 615 module/avl/Makefile: $(top_builddir)/config.status $(top_srcdir)/module/avl/Makefile.in
 616         cd $(top_builddir) && $(SHELL) ./config.status $@
 617 module/nvpair/Makefile: $(top_builddir)/config.status $(top_srcdir)/module/nvpair/Makefile.in
 618         cd $(top_builddir) && $(SHELL) ./config.status $@
 619 module/unicode/Makefile: $(top_builddir)/config.status $(top_srcdir)/module/unicode/Makefile.in
 620         cd $(top_builddir) && $(SHELL) ./config.status $@
 621 module/zcommon/Makefile: $(top_builddir)/config.status $(top_srcdir)/module/zcommon/Makefile.in
 622         cd $(top_builddir) && $(SHELL) ./config.status $@
 623 module/zfs/Makefile: $(top_builddir)/config.status $(top_srcdir)/module/zfs/Makefile.in
 624         cd $(top_builddir) && $(SHELL) ./config.status $@
 625 module/zpios/Makefile: $(top_builddir)/config.status $(top_srcdir)/module/zpios/Makefile.in
 626         cd $(top_builddir) && $(SHELL) ./config.status $@
 627 zfs.release: $(top_builddir)/config.status $(srcdir)/zfs.release.in
 628         cd $(top_builddir) && $(SHELL) ./config.status $@
 629
 630 mostlyclean-libtool:
 631         -rm -f *.lo
 632
 633 clean-libtool:
 634         -rm -rf .libs _libs
 635
 636 distclean-libtool:
 637         -rm -f libtool config.lt
 638 install-extraHEADERS: $(extra_HEADERS)
 639         @$(NORMAL_INSTALL)
 640         @list='$(extra_HEADERS)'; test -n "$(extradir)" || list=; \
 641         if test -n "$$list"; then \
 642           echo " $(MKDIR_P) '$(DESTDIR)$(extradir)'"; \
 643           $(MKDIR_P) "$(DESTDIR)$(extradir)" || exit 1; \
 644         fi; \
 645         for p in $$list; do \
 646           if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 647           echo "$$d$$p"; \
 648         done | $(am__base_list) | \
 649         while read files; do \
 650           echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(extradir)'"; \
 651           $(INSTALL_HEADER) $$files "$(DESTDIR)$(extradir)" || exit $$?; \
 652         done
 653
 654 uninstall-extraHEADERS:
 655         @$(NORMAL_UNINSTALL)
 656         @list='$(extra_HEADERS)'; test -n "$(extradir)" || list=; \
 657         files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
 658         dir='$(DESTDIR)$(extradir)'; $(am__uninstall_files_from_dir)
 659 install-nodist_kernelHEADERS: $(nodist_kernel_HEADERS)
 660         @$(NORMAL_INSTALL)
 661         @list='$(nodist_kernel_HEADERS)'; test -n "$(kerneldir)" || list=; \
 662         if test -n "$$list"; then \
 663           echo " $(MKDIR_P) '$(DESTDIR)$(kerneldir)'"; \
 664           $(MKDIR_P) "$(DESTDIR)$(kerneldir)" || exit 1; \
 665         fi; \
 666         for p in $$list; do \
 667           if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 668           echo "$$d$$p"; \
 669         done | $(am__base_list) | \
 670         while read files; do \
 671           echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(kerneldir)'"; \
 672           $(INSTALL_HEADER) $$files "$(DESTDIR)$(kerneldir)" || exit $$?; \
 673         done
 674
 675 uninstall-nodist_kernelHEADERS:
 676         @$(NORMAL_UNINSTALL)
 677         @list='$(nodist_kernel_HEADERS)'; test -n "$(kerneldir)" || list=; \
 678         files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
 679         dir='$(DESTDIR)$(kerneldir)'; $(am__uninstall_files_from_dir)
 680
 681 # This directory's subdirectories are mostly independent; you can cd
 682 # into them and run 'make' without going through this Makefile.
 683 # To change the values of 'make' variables: instead of editing Makefiles,
 684 # (1) if the variable is set in 'config.status', edit 'config.status'
 685 #     (which will cause the Makefiles to be regenerated when you run 'make');
 686 # (2) otherwise, pass the desired values on the 'make' command line.
 687 $(am__recursive_targets):
 688         @fail=; \
 689         if $(am__make_keepgoing); then \
 690           failcom='fail=yes'; \
 691         else \
 692           failcom='exit 1'; \
 693         fi; \
 694         dot_seen=no; \
 695         target=`echo $@ | sed s/-recursive//`; \
 696         case "$@" in \
 697           distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
 698           *) list='$(SUBDIRS)' ;; \
 699         esac; \
 700         for subdir in $$list; do \
 701           echo "Making $$target in $$subdir"; \
 702           if test "$$subdir" = "."; then \
 703             dot_seen=yes; \
 704             local_target="$$target-am"; \
 705           else \
 706             local_target="$$target"; \
 707           fi; \
 708           ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 709           || eval $$failcom; \
 710         done; \
 711         if test "$$dot_seen" = "no"; then \
 712           $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 713         fi; test -z "$$fail"
 714
 715 ID: $(am__tagged_files)
 716         $(am__define_uniq_tagged_files); mkid -fID $$unique
 717 TAGS: tags
 718
 719 tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
 720         set x; \
 721         here=`pwd`; \
 722         if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 723           include_option=--etags-include; \
 724           empty_fix=.; \
 725         else \
 726           include_option=--include; \
 727           empty_fix=; \
 728         fi; \
 729         list='$(SUBDIRS)'; for subdir in $$list; do \
 730           if test "$$subdir" = .; then :; else \
 731             test ! -f $$subdir/TAGS || \
 732               set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 733           fi; \
 734         done; \
 735         $(am__define_uniq_tagged_files); \
 736         shift; \
 737         if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 738           test -n "$$unique" || unique=$$empty_fix; \
 739           if test $$# -gt 0; then \
 740             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 741               "$$@" $$unique; \
 742           else \
 743             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 744               $$unique; \
 745           fi; \
 746         fi
 747
 748 CTAGS: ctags
 749 ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
 750         $(am__define_uniq_tagged_files); \
 751         test -z "$(CTAGS_ARGS)$$unique" \
 752           || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 753              $$unique
 754
 755 GTAGS:
 756         here=`$(am__cd) $(top_builddir) && pwd` \
 757           && $(am__cd) $(top_srcdir) \
 758           && gtags -i $(GTAGS_ARGS) "$$here"
 759 cscope: cscope.files
 760         test ! -s cscope.files \
 761           || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
 762 clean-cscope:
 763         -rm -f cscope.files
 764 cscope.files: clean-cscope cscopelist
 765 cscopelist: cscopelist-recursive
 766
 767 cscopelist-am: $(am__tagged_files)
 768         list='$(am__tagged_files)'; \
 769         case "$(srcdir)" in \
 770           [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
 771           *) sdir=$(subdir)/$(srcdir) ;; \
 772         esac; \
 773         for i in $$list; do \
 774           if test -f "$$i"; then \
 775             echo "$(subdir)/$$i"; \
 776           else \
 777             echo "$$sdir/$$i"; \
 778           fi; \
 779         done >> $(top_builddir)/cscope.files
 780
 781 distclean-tags:
 782         -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 783         -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
 784
 785 distdir: $(DISTFILES)
 786         $(am__remove_distdir)
 787         test -d "$(distdir)" || mkdir "$(distdir)"
 788         @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 789         topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 790         list='$(DISTFILES)'; \
 791           dist_files=`for file in $$list; do echo $$file; done | \
 792           sed -e "s|^$$srcdirstrip/||;t" \
 793               -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
 794         case $$dist_files in \
 795           */*) $(MKDIR_P) `echo "$$dist_files" | \
 796                            sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
 797                            sort -u` ;; \
 798         esac; \
 799         for file in $$dist_files; do \
 800           if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 801           if test -d $$d/$$file; then \
 802             dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
 803             if test -d "$(distdir)/$$file"; then \
 804               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 805             fi; \
 806             if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 807               cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
 808               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 809             fi; \
 810             cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 811           else \
 812             test -f "$(distdir)/$$file" \
 813             || cp -p $$d/$$file "$(distdir)/$$file" \
 814             || exit 1; \
 815           fi; \
 816         done
 817         @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 818           if test "$$subdir" = .; then :; else \
 819             $(am__make_dryrun) \
 820               || test -d "$(distdir)/$$subdir" \
 821               || $(MKDIR_P) "$(distdir)/$$subdir" \
 822               || exit 1; \
 823             dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
 824             $(am__relativize); \
 825             new_distdir=$$reldir; \
 826             dir1=$$subdir; dir2="$(top_distdir)"; \
 827             $(am__relativize); \
 828             new_top_distdir=$$reldir; \
 829             echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
 830             echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
 831             ($(am__cd) $$subdir && \
 832               $(MAKE) $(AM_MAKEFLAGS) \
 833                 top_distdir="$$new_top_distdir" \
 834                 distdir="$$new_distdir" \
 835                 am__remove_distdir=: \
 836                 am__skip_length_check=: \
 837                 am__skip_mode_fix=: \
 838                 distdir) \
 839               || exit 1; \
 840           fi; \
 841         done
 842         $(MAKE) $(AM_MAKEFLAGS) \
 843           top_distdir="$(top_distdir)" distdir="$(distdir)" \
 844           dist-hook
 845         -test -n "$(am__skip_mode_fix)" \
 846         || find "$(distdir)" -type d ! -perm -755 \
 847                 -exec chmod u+rwx,go+rx {} \; -o \
 848           ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
 849           ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
 850           ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
 851         || chmod -R a+r "$(distdir)"
 852 dist-gzip: distdir
 853         tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
 854         $(am__post_remove_distdir)
 855
 856 dist-bzip2: distdir
 857         tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
 858         $(am__post_remove_distdir)
 859
 860 dist-lzip: distdir
 861         tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
 862         $(am__post_remove_distdir)
 863
 864 dist-xz: distdir
 865         tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
 866         $(am__post_remove_distdir)
 867
 868 dist-tarZ: distdir
 869         @echo WARNING: "Support for distribution archives compressed with" \
 870                        "legacy program 'compress' is deprecated." >&2
 871         @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
 872         tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
 873         $(am__post_remove_distdir)
 874
 875 dist-shar: distdir
 876         @echo WARNING: "Support for shar distribution archives is" \
 877                        "deprecated." >&2
 878         @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
 879         shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
 880         $(am__post_remove_distdir)
 881
 882 dist-zip: distdir
 883         -rm -f $(distdir).zip
 884         zip -rq $(distdir).zip $(distdir)
 885         $(am__post_remove_distdir)
 886
 887 dist dist-all:
 888         $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
 889         $(am__post_remove_distdir)
 890
 891 # This target untars the dist file and tries a VPATH configuration.  Then
 892 # it guarantees that the distribution is self-contained by making another
 893 # tarfile.
 894 distcheck: dist
 895         case '$(DIST_ARCHIVES)' in \
 896         *.tar.gz*) \
 897           GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
 898         *.tar.bz2*) \
 899           bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
 900         *.tar.lz*) \
 901           lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
 902         *.tar.xz*) \
 903           xz -dc $(distdir).tar.xz | $(am__untar) ;;\
 904         *.tar.Z*) \
 905           uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
 906         *.shar.gz*) \
 907           GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
 908         *.zip*) \
 909           unzip $(distdir).zip ;;\
 910         esac
 911         chmod -R a-w $(distdir)
 912         chmod u+w $(distdir)
 913         mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
 914         chmod a-w $(distdir)
 915         test -d $(distdir)/_build || exit 0; \
 916         dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
 917           && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
 918           && am__cwd=`pwd` \
 919           && $(am__cd) $(distdir)/_build/sub \
 920           && ../../configure \
 921             $(AM_DISTCHECK_CONFIGURE_FLAGS) \
 922             $(DISTCHECK_CONFIGURE_FLAGS) \
 923             --srcdir=../.. --prefix="$$dc_install_base" \
 924           && $(MAKE) $(AM_MAKEFLAGS) \
 925           && $(MAKE) $(AM_MAKEFLAGS) dvi \
 926           && $(MAKE) $(AM_MAKEFLAGS) check \
 927           && $(MAKE) $(AM_MAKEFLAGS) install \
 928           && $(MAKE) $(AM_MAKEFLAGS) installcheck \
 929           && $(MAKE) $(AM_MAKEFLAGS) uninstall \
 930           && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
 931                 distuninstallcheck \
 932           && chmod -R a-w "$$dc_install_base" \
 933           && ({ \
 934                (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
 935                && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
 936                && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
 937                && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
 938                     distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
 939               } || { rm -rf "$$dc_destdir"; exit 1; }) \
 940           && rm -rf "$$dc_destdir" \
 941           && $(MAKE) $(AM_MAKEFLAGS) dist \
 942           && rm -rf $(DIST_ARCHIVES) \
 943           && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
 944           && cd "$$am__cwd" \
 945           || exit 1
 946         $(am__post_remove_distdir)
 947         @(echo "$(distdir) archives ready for distribution: "; \
 948           list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
 949           sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
 950 distuninstallcheck:
 951         @test -n '$(distuninstallcheck_dir)' || { \
 952           echo 'ERROR: trying to run $@ with an empty' \
 953                '$$(distuninstallcheck_dir)' >&2; \
 954           exit 1; \
 955         }; \
 956         $(am__cd) '$(distuninstallcheck_dir)' || { \
 957           echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
 958           exit 1; \
 959         }; \
 960         test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
 961            || { echo "ERROR: files left after uninstall:" ; \
 962                 if test -n "$(DESTDIR)"; then \
 963                   echo "  (check DESTDIR support)"; \
 964                 fi ; \
 965                 $(distuninstallcheck_listfiles) ; \
 966                 exit 1; } >&2
 967 distcleancheck: distclean
 968         @if test '$(srcdir)' = . ; then \
 969           echo "ERROR: distcleancheck can only run from a VPATH build" ; \
 970           exit 1 ; \
 971         fi
 972         @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
 973           || { echo "ERROR: files left in build directory after distclean:" ; \
 974                $(distcleancheck_listfiles) ; \
 975                exit 1; } >&2
 976 check-am: all-am
 977 check: check-recursive
 978 all-am: Makefile $(HEADERS) zfs_config.h
 979 installdirs: installdirs-recursive
 980 installdirs-am:
 981         for dir in "$(DESTDIR)$(extradir)" "$(DESTDIR)$(kerneldir)"; do \
 982           test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 983         done
 984 install: install-recursive
 985 install-exec: install-exec-recursive
 986 install-data: install-data-recursive
 987 uninstall: uninstall-recursive
 988
 989 install-am: all-am
 990         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 991
 992 installcheck: installcheck-recursive
 993 install-strip:
 994         if test -z '$(STRIP)'; then \
 995           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 996             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 997               install; \
 998         else \
 999           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
1000             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
1001             "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
1002         fi
1003 mostlyclean-generic:
1004
1005 clean-generic:
1006
1007 distclean-generic:
1008         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
1009         -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
1010
1011 maintainer-clean-generic:
1012         @echo "This command is intended for maintainers to use"
1013         @echo "it deletes files that may require special tools to rebuild."
1014 clean: clean-recursive
1015
1016 clean-am: clean-generic clean-libtool mostlyclean-am
1017
1018 distclean: distclean-recursive
1019         -rm -f $(am__CONFIG_DISTCLEAN_FILES)
1020         -rm -f Makefile
1021 distclean-am: clean-am distclean-generic distclean-hdr \
1022         distclean-libtool distclean-local distclean-tags
1023
1024 dvi: dvi-recursive
1025
1026 dvi-am:
1027
1028 html: html-recursive
1029
1030 html-am:
1031
1032 info: info-recursive
1033
1034 info-am:
1035
1036 install-data-am: install-extraHEADERS install-nodist_kernelHEADERS
1037
1038 install-dvi: install-dvi-recursive
1039
1040 install-dvi-am:
1041
1042 install-exec-am:
1043
1044 install-html: install-html-recursive
1045
1046 install-html-am:
1047
1048 install-info: install-info-recursive
1049
1050 install-info-am:
1051
1052 install-man:
1053
1054 install-pdf: install-pdf-recursive
1055
1056 install-pdf-am:
1057
1058 install-ps: install-ps-recursive
1059
1060 install-ps-am:
1061
1062 installcheck-am:
1063
1064 maintainer-clean: maintainer-clean-recursive
1065         -rm -f $(am__CONFIG_DISTCLEAN_FILES)
1066         -rm -rf $(top_srcdir)/autom4te.cache
1067         -rm -f Makefile
1068 maintainer-clean-am: distclean-am maintainer-clean-generic
1069
1070 mostlyclean: mostlyclean-recursive
1071
1072 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
1073
1074 pdf: pdf-recursive
1075
1076 pdf-am:
1077
1078 ps: ps-recursive
1079
1080 ps-am:
1081
1082 uninstall-am: uninstall-extraHEADERS uninstall-nodist_kernelHEADERS
1083
1084 .MAKE: $(am__recursive_targets) all install-am install-strip
1085
1086 .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
1087         am--refresh check check-am clean clean-cscope clean-generic \
1088         clean-libtool cscope cscopelist-am ctags ctags-am dist \
1089         dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \
1090         dist-tarZ dist-xz dist-zip distcheck distclean \
1091         distclean-generic distclean-hdr distclean-libtool \
1092         distclean-local distclean-tags distcleancheck distdir \
1093         distuninstallcheck dvi dvi-am html html-am info info-am \
1094         install install-am install-data install-data-am install-dvi \
1095         install-dvi-am install-exec install-exec-am \
1096         install-extraHEADERS install-html install-html-am install-info \
1097         install-info-am install-man install-nodist_kernelHEADERS \
1098         install-pdf install-pdf-am install-ps install-ps-am \
1099         install-strip installcheck installcheck-am installdirs \
1100         installdirs-am maintainer-clean maintainer-clean-generic \
1101         mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
1102         ps ps-am tags tags-am uninstall uninstall-am \
1103         uninstall-extraHEADERS uninstall-nodist_kernelHEADERS
1104
1105 .PRECIOUS: Makefile
1106
1107
1108 srpm-kmod:
1109         $(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}-kmod" \
1110                 def='${SRPM_DEFINE_COMMON} ${SRPM_DEFINE_KMOD}' srpm-common
1111
1112 srpm-dkms:
1113         $(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}-dkms" \
1114                 def='${SRPM_DEFINE_COMMON} ${SRPM_DEFINE_DKMS}' srpm-common
1115
1116 srpm-utils:
1117         $(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}" \
1118                 def='${SRPM_DEFINE_COMMON} ${SRPM_DEFINE_UTIL}' srpm-common
1119
1120 srpm: srpm-kmod srpm-dkms srpm-utils
1121 srpms: srpm-kmod srpm-dkms srpm-utils
1122
1123 rpm-kmod: srpm-kmod
1124         $(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}-kmod" \
1125                 def='${RPM_DEFINE_COMMON} ${RPM_DEFINE_KMOD}' rpm-common
1126
1127 rpm-dkms: srpm-dkms
1128         $(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}-dkms" \
1129                 def='${RPM_DEFINE_COMMON} ${RPM_DEFINE_DKMS}' rpm-common
1130
1131 rpm-utils: srpm-utils
1132         $(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}" \
1133                 def='${RPM_DEFINE_COMMON} ${RPM_DEFINE_UTIL}' rpm-common
1134
1135 rpm: rpm-kmod rpm-dkms rpm-utils
1136 rpms: rpm-kmod rpm-dkms rpm-utils
1137
1138 rpm-local:
1139         @(if test "${HAVE_RPMBUILD}" = "no"; then \
1140                 echo -e "\n" \
1141         "*** Required util ${RPMBUILD} missing.  Please install the\n" \
1142         "*** package for your distribution which provides ${RPMBUILD},\n" \
1143         "*** re-run configure, and try again.\n"; \
1144                 exit 1; \
1145         fi; \
1146         mkdir -p $(rpmbuild)/TMP && \
1147         mkdir -p $(rpmbuild)/BUILD && \
1148         mkdir -p $(rpmbuild)/RPMS && \
1149         mkdir -p $(rpmbuild)/SRPMS && \
1150         mkdir -p $(rpmbuild)/SPECS && \
1151         cp ${RPM_SPEC_DIR}/$(rpmspec) $(rpmbuild)/SPECS && \
1152         mkdir -p $(rpmbuild)/SOURCES && \
1153         cp $(top_srcdir)/scripts/kmodtool $(rpmbuild)/SOURCES && \
1154         cp $(distdir).tar.gz $(rpmbuild)/SOURCES)
1155
1156 srpm-common: dist
1157         @(dist=`$(RPM) --eval %{?dist}`; \
1158         rpmpkg=$(pkg)-$(VERSION)-$(RELEASE)$$dist*src.rpm; \
1159         rpmspec=$(pkg).spec; \
1160         rpmbuild=`mktemp -t -d $(PACKAGE)-build-$$USER-XXXXXXXX`; \
1161         $(MAKE) $(AM_MAKEFLAGS) \
1162                 rpmbuild="$$rpmbuild" \
1163                 rpmspec="$$rpmspec" \
1164                 rpm-local || exit 1; \
1165         LANG=C $(RPMBUILD) \
1166                 --define "_tmppath $$rpmbuild/TMP" \
1167                 --define "_topdir $$rpmbuild" \
1168                 $(def) -bs $$rpmbuild/SPECS/$$rpmspec || exit 1; \
1169         cp $$rpmbuild/SRPMS/$$rpmpkg . || exit 1; \
1170         rm -R $$rpmbuild)
1171
1172 rpm-common:
1173         @(dist=`$(RPM) --eval %{?dist}`; \
1174         rpmpkg=$(pkg)-$(VERSION)-$(RELEASE)$$dist*src.rpm; \
1175         rpmspec=$(pkg).spec; \
1176         rpmbuild=`mktemp -t -d $(PACKAGE)-build-$$USER-XXXXXXXX`; \
1177         $(MAKE) $(AM_MAKEFLAGS) \
1178                 rpmbuild="$$rpmbuild" \
1179                 rpmspec="$$rpmspec" \
1180                 rpm-local || exit 1; \
1181         LANG=C ${RPMBUILD} \
1182                 --define "_tmppath $$rpmbuild/TMP" \
1183                 --define "_topdir $$rpmbuild" \
1184                 $(def) --rebuild $$rpmpkg || exit 1; \
1185         cp $$rpmbuild/RPMS/*/* . || exit 1; \
1186         rm -R $$rpmbuild)
1187 deb-local:
1188         @(if test "${HAVE_DPKGBUILD}" = "no"; then \
1189                 echo -e "\n" \
1190         "*** Required util ${DPKGBUILD} missing.  Please install the\n" \
1191         "*** package for your distribution which provides ${DPKGBUILD},\n" \
1192         "*** re-run configure, and try again.\n"; \
1193                 exit 1; \
1194         fi; \
1195         if test "${HAVE_ALIEN}" = "no"; then \
1196                 echo -e "\n" \
1197         "*** Required util ${ALIEN} missing.  Please install the\n" \
1198         "*** package for your distribution which provides ${ALIEN},\n" \
1199         "*** re-run configure, and try again.\n"; \
1200                 exit 1; \
1201         fi)
1202
1203 deb-kmod: deb-local rpm-kmod
1204 @CONFIG_KERNEL_TRUE@    name=${PACKAGE}; \
1205 @CONFIG_KERNEL_TRUE@    version=${VERSION}-${RELEASE}; \
1206 @CONFIG_KERNEL_TRUE@    arch=`$(RPM) -qp $${name}-kmod-$${version}.src.rpm --qf %{arch} | tail -1`; \
1207 @CONFIG_KERNEL_TRUE@    pkg1=kmod-$${name}*$${version}.$${arch}.rpm; \
1208 @CONFIG_KERNEL_TRUE@    fakeroot $(ALIEN) --bump=0 --scripts --to-deb $$pkg1; \
1209 @CONFIG_KERNEL_TRUE@    $(RM) $$pkg1
1210
1211 deb-utils: deb-local rpm-utils
1212 @CONFIG_USER_TRUE@      name=${PACKAGE}; \
1213 @CONFIG_USER_TRUE@      version=${VERSION}-${RELEASE}; \
1214 @CONFIG_USER_TRUE@      arch=`$(RPM) -qp $${name}-$${version}.src.rpm --qf %{arch} | tail -1`; \
1215 @CONFIG_USER_TRUE@      pkg1=$${name}-$${version}.$${arch}.rpm; \
1216 @CONFIG_USER_TRUE@      pkg2=libnvpair1-$${version}.$${arch}.rpm; \
1217 @CONFIG_USER_TRUE@      pkg3=libuutil1-$${version}.$${arch}.rpm; \
1218 @CONFIG_USER_TRUE@      pkg4=libzfs2-$${version}.$${arch}.rpm; \
1219 @CONFIG_USER_TRUE@      pkg5=libzpool2-$${version}.$${arch}.rpm; \
1220 @CONFIG_USER_TRUE@      pkg6=libzfs2-devel-$${version}.$${arch}.rpm; \
1221 @CONFIG_USER_TRUE@      pkg7=$${name}-test-$${version}.$${arch}.rpm; \
1222 @CONFIG_USER_TRUE@      pkg8=$${name}-dracut-$${version}.$${arch}.rpm; \
1223 @CONFIG_USER_TRUE@      pkg9=$${name}-initramfs-$${version}.$${arch}.rpm; \
1224 @CONFIG_USER_TRUE@      fakeroot $(ALIEN) --bump=0 --scripts --to-deb \
1225 @CONFIG_USER_TRUE@          $$pkg1 $$pkg2 $$pkg3 $$pkg4 $$pkg5 $$pkg6 $$pkg7 \
1226 @CONFIG_USER_TRUE@          $$pkg8 $$pkg9;
1227 @CONFIG_USER_TRUE@      $(RM) $$pkg1 $$pkg2 $$pkg3 $$pkg4 $$pkg5 $$pkg6 $$pkg7 \
1228 @CONFIG_USER_TRUE@          $$pkg8 $$pkg9;
1229
1230 deb: deb-kmod deb-utils
1231 tgz-local:
1232         @(if test "${HAVE_ALIEN}" = "no"; then \
1233                 echo -e "\n" \
1234         "*** Required util ${ALIEN} missing.  Please install the\n" \
1235         "*** package for your distribution which provides ${ALIEN},\n" \
1236         "*** re-run configure, and try again.\n"; \
1237                 exit 1; \
1238         fi)
1239
1240 tgz-kmod: tgz-local rpm-kmod
1241 @CONFIG_KERNEL_TRUE@    name=${PACKAGE}; \
1242 @CONFIG_KERNEL_TRUE@    version=${VERSION}-${RELEASE}; \
1243 @CONFIG_KERNEL_TRUE@    arch=`$(RPM) -qp $${name}-kmod-$${version}.src.rpm --qf %{arch} | tail -1`; \
1244 @CONFIG_KERNEL_TRUE@    pkg1=kmod-$${name}*$${version}.$${arch}.rpm; \
1245 @CONFIG_KERNEL_TRUE@    fakeroot $(ALIEN) --scripts --to-tgz $$pkg1; \
1246 @CONFIG_KERNEL_TRUE@    $(RM) $$pkg1
1247
1248 tgz-utils: tgz-local rpm-utils
1249 @CONFIG_USER_TRUE@      name=${PACKAGE}; \
1250 @CONFIG_USER_TRUE@      version=${VERSION}-${RELEASE}; \
1251 @CONFIG_USER_TRUE@      arch=`$(RPM) -qp $${name}-$${version}.src.rpm --qf %{arch} | tail -1`; \
1252 @CONFIG_USER_TRUE@      pkg1=$${name}-$${version}.$${arch}.rpm; \
1253 @CONFIG_USER_TRUE@      pkg2=$${name}-devel-$${version}.$${arch}.rpm; \
1254 @CONFIG_USER_TRUE@      pkg3=$${name}-test-$${version}.$${arch}.rpm; \
1255 @CONFIG_USER_TRUE@      fakeroot $(ALIEN) --scripts --to-tgz $$pkg1 $$pkg2 $$pkg3; \
1256 @CONFIG_USER_TRUE@      $(RM) $$pkg1 $$pkg2 $$pkg3
1257
1258 tgz: tgz-kmod tgz-utils
1259
1260 distclean-local::
1261         -$(RM) -R autom4te*.cache
1262         -find . \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS \
1263                 -o -name .pc -o -name .hg -o -name .git \) -prune -o \
1264                 \( -name '*.orig' -o -name '*.rej' -o -name '*~' \
1265                 -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
1266                 -o -name '.*.rej' -o -name '.script-config' -o -size 0 \
1267                 -o -name '*%' -o -name '.*.cmd' -o -name 'core' \
1268                 -o -name 'Makefile' -o -name 'Module.symvers' \
1269                 -o -name '*.order' -o -name '*.markers' \) \
1270                 -type f -print | xargs $(RM)
1271
1272 dist-hook:
1273         sed -i 's/Release:[[:print:]]*/Release:      $(RELEASE)/' \
1274                 $(distdir)/META
1275
1276 checkstyle: cstyle shellcheck
1277
1278 cstyle:
1279         @find ${top_srcdir} -name '*.[hc]' ! -name 'zfs_config.*' \
1280                 ! -name '*.mod.c' -type f -exec scripts/cstyle.pl {} \+
1281
1282 shellcheck:
1283         @if type shellcheck > /dev/null 2>&1; then \
1284                 (find ${top_srcdir} -type f -name '*.sh.in' -o -type f \
1285                  -name '*.sh'; find etc/init.d/zfs*.in -type f) | \
1286                  grep -v 'zfs-script-config' | \
1287                  while read file; do \
1288                         shellcheck --format gcc "$$file"; \
1289                  done; \
1290          fi
1291
1292 lint: cppcheck
1293
1294 cppcheck:
1295         @if type cppcheck > /dev/null 2>&1; then \
1296                 cppcheck --quiet --force ${top_srcdir}; \
1297         fi
1298
1299 ctags:
1300         $(RM) tags
1301         find $(top_srcdir) -name .git -prune -o -name '*.[hc]' | xargs ctags
1302
1303 etags:
1304         $(RM) TAGS
1305         find $(top_srcdir) -name .pc -prune -o -name '*.[hc]' | xargs etags -a
1306
1307 tags: ctags etags
1308
1309 pkg: @DEFAULT_PACKAGE@
1310 pkg-kmod: @DEFAULT_PACKAGE@-kmod
1311 pkg-utils: @DEFAULT_PACKAGE@-utils
1312
1313 # Tell versions [3.59,3.63) of GNU make to not export all variables.
1314 # Otherwise a system limit (for SysV at least) may be exceeded.
1315 .NOEXPORT: