use PVE::Network;
use PVE::Tools;
use PVE::ProcFSTools;
+use PVE::JSONSchema;
use Clone qw(clone);
use Linux::Inotify2;
use base 'Exporter';
-use JSON;
+use JSON;
+use Digest::SHA;
+use Encode qw(encode decode);
our @EXPORT_OK = qw(read_file write_file register_file);
my $diff = '';
- open (TMP, "diff -b -N -u '$filename' '$shadow'|");
-
- while (my $line = <TMP>) {
- $diff .= $line;
- }
-
- close (TMP);
+ my $cmd = ['/usr/bin/diff', '-b', '-N', '-u', $filename, $shadow];
+ PVE::Tools::run_command($cmd, noerr => 1, outfunc => sub {
+ my ($line) = @_;
+ $diff .= decode('UTF-8', $line) . "\n";
+ });
$diff = undef if !$diff;
\&read_etc_hostname,
\&write_etc_hostname);
+sub read_etc_hosts {
+ my ($filename, $fh) = @_;
+
+ my $raw = '';
+ my $data = '';
+
+ while (my $line = <$fh>) {
+ $raw .= $line;
+ if ($line =~ m/^\s*#/) {
+ $line = decode('UTF-8', $line);
+ }
+ $data .= $line;
+ }
+
+ return {
+ digest => Digest::SHA::sha1_hex($raw),
+ data => $data,
+ }
+}
+
+sub write_etc_hosts {
+ my ($filename, $fh, $hosts, @args) = @_;
+
+ # check validity of ips/names
+ for my $line (split("\n", $hosts)) {
+ next if $line =~ m/^\s*#/; # comments
+ next if $line =~ m/^\s*$/; # whitespace/empty lines
+
+ my ($ip, @names) = split(/\s+/, $line);
+
+ raise_param_exc({ 'data' => "Invalid IP '$ip'" })
+ if $ip !~ m/^$PVE::Tools::IPRE$/;
+
+ for my $name (@names) {
+ raise_param_exc({ 'data' => "Invalid Hostname '$name'" })
+ if $name !~ m/^[.\-a-zA-Z0-9]+$/;
+ }
+ }
+
+ die "write failed: $!" if !print $fh encode('UTF-8', $hosts);
+
+ return $hosts;
+}
+
+register_file('etchosts', "/etc/hosts",
+ \&read_etc_hosts,
+ \&write_etc_hosts);
+
sub read_etc_resolv_conf {
my ($filename, $fh) = @_;
die "check mtu - missing parent interface\n" if !$parent;
die "check mtu - missing child interface\n" if !$child;
- my $pmtu = $ifaces->{$parent}->{mtu} ? $ifaces->{$parent}->{mtu} : 1500;
- my $cmtu = $ifaces->{$child}->{mtu} ? $ifaces->{$child}->{mtu} : 1500;
+ my $cmtu = $ifaces->{$child}->{mtu};
+ return if !$cmtu;
+
+ my $parentdata = $ifaces->{$parent};
+ my $pmtu = $parentdata->{mtu};
+ $pmtu = $cmtu if $parentdata->{type} eq 'bond' && !$pmtu;
+ $pmtu = 1500 if !$pmtu;
- die "interface '$parent' - mtu $pmtu is bigger than '$child' - mtu $cmtu\n"
- if $pmtu > $cmtu;
+ die "interface '$parent' - mtu $pmtu is lower than '$child' - mtu $cmtu\n"
+ if $pmtu < $cmtu;
};
# config => {
while (defined ($line = <$fh>)) {
chomp $line;
if ($line =~ m/^\s*#(.*?)\s*$/) {
- # NOTE: we use 'comments' instead of 'comment' to
- # avoid automatic utf8 conversion
$f->{comments} = '' if !$f->{comments};
- $f->{comments} .= "$1\n";
+ my $comment = decode('UTF-8', $1);
+ $f->{comments} .= "$comment\n";
} elsif ($line =~ m/^\s*(?:iface\s
|mapping\s
|auto\s
'bridge-multicast-flood' => 1,
'bond_miimon' => 1,
'bond_xmit_hash_policy' => 1,
+ 'vlan-protocol' => 1,
'vxlan-id' => 1,
'vxlan-svcnodeip' => 1,
'vxlan-physdev' => 1,
}
}
+ # map address and netmask to cidr
+ if ($d->{address}) {
+ if ($d->{netmask} =~ m/^\d+$/) { # e.g. netmask 20
+ $d->{cidr} = $d->{address} . "/" . $d->{netmask};
+ } elsif ($d->{netmask} &&
+ (my $cidr = PVE::JSONSchema::get_netmask_bits($d->{netmask}))) { # e.g. netmask 255.255.255.0
+ $d->{cidr} = $d->{address} . "/" . $cidr;
+ } elsif ($d->{address} =~ m!^(.*)/(\d+)$!) {
+ $d->{cidr} = $d->{address};
+ $d->{address} = $1;
+ $d->{netmask} = $2;
+ } else {
+ $d->{cidr} = $d->{address};
+ }
+ }
+
+ # map address6 and netmask6 to cidr6
+ if ($d->{address6}) {
+ $d->{cidr6} = $d->{address6};
+ if ($d->{netmask6}) {
+ $d->{cidr6} .= "/" . $d->{netmask6} if $d->{netmask6};
+ } elsif ($d->{address6} =~ m!^(.*)/(\d+)$!) {
+ $d->{cidr6} = $d->{address6};
+ $d->{address6} = $1;
+ $d->{netmask6} = $2;
+ }
+ }
+
$d->{method} = 'manual' if !$d->{method};
$d->{method6} = 'manual' if !$d->{method6};
$raw .= "\tbond-xmit-hash-policy $d->{'bond_xmit_hash_policy'}\n";
}
$done->{'bond_xmit_hash_policy'} = 1;
+ } elsif ($d->{type} eq 'vlan') {
+ die "$iface: wrong vlan-protocol $d->{'vlan-protocol'}\n"
+ if $d->{'vlan-protocol'} && $d->{'vlan-protocol'} ne '802.1ad' && $d->{'vlan-protocol'} ne '802.1q';
+
} elsif ($d->{type} eq 'vxlan') {
foreach my $k (qw(vxlan-id vxlan-svcnodeip vxlan-physdev vxlan-local-tunnelip)) {
my ($filename, $fh, $config) = @_;
my $ifupdown2 = -e '/usr/share/ifupdown2';
my $raw = __write_etc_network_interfaces($config, $ifupdown2);
- PVE::Tools::safe_print($filename, $fh, $raw);
+ PVE::Tools::safe_print($filename, $fh, encode('UTF-8', $raw));
}
sub __write_etc_network_interfaces {
my ($config, $ifupdown2) = @_;
foreach my $iface (keys %$ifaces) {
my $d = $ifaces->{$iface};
+ delete $d->{cidr};
+ delete $d->{cidr6};
+
my $ports = '';
foreach my $k (qw(bridge_ports ovs_ports slaves ovs_bonds)) {
$ports .= " $d->{$k}" if $d->{$k};
if ($n->{type} eq 'bridge' && !$n->{bridge_vlan_aware}) {
die "vlan '$iface' - bridge vlan aware is not enabled on parent '$p'\n";
- } elsif ($n->{type} ne 'eth' && $n->{type} ne 'bridge' && $n->{type} ne 'bond') {
+ } elsif ($n->{type} ne 'eth' && $n->{type} ne 'bridge' && $n->{type} ne 'bond' && $n->{type} ne 'vlan') {
die "vlan '$iface' - wrong interface type on parent '$p' " .
- "('$n->{type}' != 'eth|bond|bridge' )\n";
+ "('$n->{type}' != 'eth|bond|bridge|vlan' )\n";
}
- &$check_mtu($ifaces, $iface, $p);
+
+ &$check_mtu($ifaces, $p, $iface);
+
}
}
my $d = $ifaces->{$iface};
if ($d->{type} eq 'bridge') {
foreach my $p (split (/\s+/, $d->{bridge_ports})) {
+ $p =~ s/\.\d+$//;
my $n = $ifaces->{$p};
die "bridge '$iface' - unable to find bridge port '$p'\n"
if !$n;
# Please do NOT modify this file directly, unless you know what
# you're doing.
#
-# If you want to manage part of the network configuration manually,
+# If you want to manage parts of the network configuration manually,
# please utilize the 'source' or 'source-directory' directives to do
# so.
-# PVE will preserve these directives, but will NOT its network
+# PVE will preserve these directives, but will NOT read its network
# configuration from sourced files, so do not attempt to move any of
# the PVE managed interfaces into external files!
my $if_type_hash = {
loopback => 100000,
eth => 200000,
+ OVSPort => 200000,
+ OVSIntPort => 200000,
bond => 300000,
bridge => 400000,
+ OVSBridge => 400000,
vxlan => 500000,
};
my $lookup_type_prio = sub {
- my $iface = shift;
+ my ($iface, $ifaces) = @_;
- my $child = 0;
- if ($iface =~ m/^(\S+)(\.|:)\d+$/) {
- $iface = $1;
- $child = 1;
- }
+ my ($rootiface, @rest) = split(/[.:]/, $iface);
+ my $childlevel = scalar(@rest);
+ my $n = $ifaces->{$rootiface};
- my $pri;
- if ($iface eq 'lo') {
- $pri = $if_type_hash->{loopback};
- } elsif ($iface =~ m/^$PVE::Network::PHYSICAL_NIC_RE$/) {
- $pri = $if_type_hash->{eth} + $child;
- } elsif ($iface =~ m/^bond\d+$/) {
- $pri = $if_type_hash->{bond} + $child;
- } elsif ($iface =~ m/^vmbr\d+$/) {
- $pri = $if_type_hash->{bridge} + $child;
- }
+ my $pri = $if_type_hash->{$n->{type}} + $childlevel
+ if $n->{type} && $n->{type} ne 'unknown';
return $pri;
};
foreach my $iface (sort {
my $ref1 = $ifaces->{$a};
my $ref2 = $ifaces->{$b};
- my $tp1 = &$lookup_type_prio($a);
- my $tp2 = &$lookup_type_prio($b);
+ my $tp1 = &$lookup_type_prio($a, $ifaces);
+ my $tp2 = &$lookup_type_prio($b, $ifaces);
# Only recognized types are in relation to each other. If one type
# is unknown then only consider the interfaces' priority attributes.