accel/tcg: Widen address arg in tlb_compare_set()

[mirror_qemu.git] / qemu-options.hx

diff --git a/qemu-options.hx b/qemu-options.hx
index b57489d7ca3b2a3b9df93ff9e6a9a42ea20cf1b7..29b98c3d4c55f89c35355b761ecc2bdf117ef017 100644 (file)
--- a/qemu-options.hx
+++ b/qemu-options.hx
@@ -652,7 +652,7 @@ DEF("m", HAS_ARG, QEMU_OPTION_m,
     "                size: initial amount of guest memory\n"
     "                slots: number of hotplug slots (default: none)\n"
     "                maxmem: maximum amount of guest memory (default: none)\n"
     "                size: initial amount of guest memory\n"
     "                slots: number of hotplug slots (default: none)\n"
     "                maxmem: maximum amount of guest memory (default: none)\n"

-    "NOTE: Some architectures might enforce a specific granularity\n",
+    "                Note: Some architectures might enforce a specific granularity\n",

     QEMU_ARCH_ALL)
 SRST
 ``-m [size=]megs[,slots=n,maxmem=size]``
     QEMU_ARCH_ALL)
 SRST
 ``-m [size=]megs[,slots=n,maxmem=size]``


@@ -963,10 +963,10 @@ SRST
         to honor this value but actual latencies may be lower or higher.
 
 ``-audiodev pipewire,id=id[,prop[=value][,...]]``
         to honor this value but actual latencies may be lower or higher.
 
 ``-audiodev pipewire,id=id[,prop[=value][,...]]``

-    Creates a backend using Pipewire. This backend is available on
+    Creates a backend using PipeWire. This backend is available on

     most systems.
 
     most systems.
 

-    Pipewire specific options are:
+    PipeWire specific options are:

 
     ``in|out.latency=usecs``
         Desired latency in microseconds.
 
     ``in|out.latency=usecs``
         Desired latency in microseconds.


@@ -1735,7 +1735,9 @@ SRST
         Accesses to the filesystem are done by QEMU.
 
     ``proxy``
         Accesses to the filesystem are done by QEMU.
 
     ``proxy``

-        Accesses to the filesystem are done by virtfs-proxy-helper(1).
+        Accesses to the filesystem are done by virtfs-proxy-helper(1). This
+        option is deprecated (since QEMU 8.1) and will be removed in a future
+        version of QEMU. Use ``local`` instead.

 
     ``synth``
         Synthetic filesystem, only used by QTests.
 
     ``synth``
         Synthetic filesystem, only used by QTests.


@@ -1867,6 +1869,8 @@ SRST
 
     ``proxy``
         Accesses to the filesystem are done by virtfs-proxy-helper(1).
 
     ``proxy``
         Accesses to the filesystem are done by virtfs-proxy-helper(1).

+        This option is deprecated (since QEMU 8.1) and will be removed in a
+        future version of QEMU. Use ``local`` instead.

 
     ``synth``
         Synthetic filesystem, only used by QTests.
 
     ``synth``
         Synthetic filesystem, only used by QTests.


@@ -2139,6 +2143,9 @@ SRST
 
         ``show-menubar=on|off`` : Display the main window menubar, defaults to "on"
 
 
         ``show-menubar=on|off`` : Display the main window menubar, defaults to "on"
 

+        ``zoom-to-fit=on|off`` : Expand video output to the window size,
+                                 defaults to "off"
+

     ``curses[,charset=<encoding>]``
         Display video output via curses. For graphics device models
         which support a text mode, QEMU can display this output using a
     ``curses[,charset=<encoding>]``
         Display video output via curses. For graphics device models
         which support a text mode, QEMU can display this output using a


@@ -2210,8 +2217,8 @@ DEF("spice", HAS_ARG, QEMU_OPTION_spice,
     "       [,disable-agent-file-xfer=on|off][,agent-mouse=[on|off]]\n"
     "       [,playback-compression=[on|off]][,seamless-migration=[on|off]]\n"
     "       [,gl=[on|off]][,rendernode=<file>]\n"
     "       [,disable-agent-file-xfer=on|off][,agent-mouse=[on|off]]\n"
     "       [,playback-compression=[on|off]][,seamless-migration=[on|off]]\n"
     "       [,gl=[on|off]][,rendernode=<file>]\n"

-    "   enable spice\n"
-    "   at least one of {port, tls-port} is mandatory\n",
+    "                enable spice\n"
+    "                at least one of {port, tls-port} is mandatory\n",

     QEMU_ARCH_ALL)
 #endif
 SRST
     QEMU_ARCH_ALL)
 #endif
 SRST


@@ -4670,11 +4677,12 @@ ERST
 
 #ifndef _WIN32
 DEF("chroot", HAS_ARG, QEMU_OPTION_chroot, \
 
 #ifndef _WIN32
 DEF("chroot", HAS_ARG, QEMU_OPTION_chroot, \

-    "-chroot dir     chroot to dir just before starting the VM\n",
+    "-chroot dir     chroot to dir just before starting the VM (deprecated)\n",

     QEMU_ARCH_ALL)
 #endif
 SRST
 ``-chroot dir``
     QEMU_ARCH_ALL)
 #endif
 SRST
 ``-chroot dir``

+    Deprecated, use '-run-with chroot=...' instead.

     Immediately before starting guest execution, chroot to the specified
     directory. Especially useful in combination with -runas.
 ERST
     Immediately before starting guest execution, chroot to the specified
     directory. Especially useful in combination with -runas.
 ERST


@@ -4861,13 +4869,16 @@ SRST
     This option is deprecated and should no longer be used. The new option
     ``-run-with async-teardown=on`` is a replacement.
 ERST
     This option is deprecated and should no longer be used. The new option
     ``-run-with async-teardown=on`` is a replacement.
 ERST

+#endif
+#ifdef CONFIG_POSIX

 DEF("run-with", HAS_ARG, QEMU_OPTION_run_with,
 DEF("run-with", HAS_ARG, QEMU_OPTION_run_with,

-    "-run-with async-teardown[=on|off]\n"
-    "                misc QEMU process lifecycle options\n"
-    "                async-teardown=on enables asynchronous teardown\n",
+    "-run-with [async-teardown=on|off][,chroot=dir]\n"
+    "                Set miscellaneous QEMU process lifecycle options:\n"
+    "                async-teardown=on enables asynchronous teardown (Linux only)\n"
+    "                chroot=dir chroot to dir just before starting the VM\n",

     QEMU_ARCH_ALL)
 SRST
     QEMU_ARCH_ALL)
 SRST

-``-run-with``
+``-run-with [async-teardown=on|off][,chroot=dir]``

     Set QEMU process lifecycle options.
 
     ``async-teardown=on`` enables asynchronous teardown. A new process called
     Set QEMU process lifecycle options.
 
     ``async-teardown=on`` enables asynchronous teardown. A new process called


@@ -4880,6 +4891,10 @@ SRST
     performed correctly. This only works if the cleanup process is not
     forcefully killed with SIGKILL before the main QEMU process has
     terminated completely.
     performed correctly. This only works if the cleanup process is not
     forcefully killed with SIGKILL before the main QEMU process has
     terminated completely.

+
+    ``chroot=dir`` can be used for doing a chroot to the specified directory
+    immediately before starting the guest execution. This is especially useful
+    in combination with -runas.

 ERST
 #endif
 
 ERST
 #endif