a device, i.e. no other LED class device can be assigned the same
label.
+- default-state : The initial state of the LED. Valid values are "on", "off",
+ and "keep". If the LED is already on or off and the default-state property is
+ set the to same value, then no glitch should be produced where the LED
+ momentarily turns off (or on). The "keep" setting will keep the LED at
+ whatever its current state is, without producing a glitch. The default is
+ off if this property is not present.
+
- linux,default-trigger : This parameter, if present, is a
string defining the trigger assigned to the LED. Current triggers are:
"backlight" - LED will act as a back-light, controlled by the framebuffer
Examples:
-system-status {
- label = "Status";
- linux,default-trigger = "heartbeat";
- ...
+gpio-leds {
+ compatible = "gpio-leds";
+
+ system-status {
+ label = "Status";
+ linux,default-trigger = "heartbeat";
+ gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+ };
};
-camera-flash {
- label = "Flash";
- led-sources = <0>, <1>;
- led-max-microamp = <50000>;
- flash-max-microamp = <320000>;
- flash-max-timeout-us = <500000>;
+max77693-led {
+ compatible = "maxim,max77693-led";
+
+ camera-flash {
+ label = "Flash";
+ led-sources = <0>, <1>;
+ led-max-microamp = <50000>;
+ flash-max-microamp = <320000>;
+ flash-max-timeout-us = <500000>;
+ };
};